Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into next

Freescale updates from Scott:

"Highlights include more 8xx optimizations, an e6500 hugetlb optimization,
QMan device tree nodes, t1024/t1023 support, and various fixes and
cleanup."

Documentation/devicetree/bindings/powerpc/fsl/fman.txt

@@ -189,6 +189,19 @@ PROPERTIES
 		Definition: There is one reg region describing the port
 		configuration registers.
 
+- fsl,fman-10g-port
+		Usage: optional
+		Value type: boolean
+		Definition: The default port rate is 1G.
+		If this property exists, the port is s 10G port.
+
+- fsl,fman-best-effort-port
+		Usage: optional
+		Value type: boolean
+		Definition: Can be defined only if 10G-support is set.
+		This property marks a best-effort 10G port (10G port that
+		may not be capable of line rate).
+
 EXAMPLE
 
 port@a8000 {

Documentation/devicetree/bindings/powerpc/fsl/guts.txt

@@ -9,6 +9,11 @@ Required properties:
 
  - compatible : Should define the compatible device type for
    global-utilities.
+   Possible compatibles:
+	"fsl,qoriq-device-config-1.0"
+	"fsl,qoriq-device-config-2.0"
+	"fsl,<chip>-device-config"
+	"fsl,<chip>-guts"
  - reg : Offset and length of the register set for the device.
 
 Recommended properties:

Documentation/devicetree/bindings/soc/fsl/qman-portals.txt

@@ -47,7 +47,7 @@ PROPERTIES
 
 	For additional details about the PAMU/LIODN binding(s) see pamu.txt
 
-- fsl,qman-channel-id
+- cell-index
 	Usage:		Required
 	Value type:	<u32>
 	Definition:	The hardware index of the channel. This can also be
@@ -136,7 +136,7 @@ The example below shows a (P4080) QMan portals container/bus node with two porta
 			reg = <0x4000 0x4000>, <0x101000 0x1000>;
 			interrupts = <106 2 0 0>;
 			fsl,liodn = <3 4>;
-			fsl,qman-channel-id = <1>;
+			cell-index = <1>;
 
 			fman0 {
 				fsl,liodn = <0x22>;

arch/powerpc/boot/dts/b4qds.dtsi

@@ -106,6 +106,14 @@
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
 	};
 
 	dcsr: dcsr@f00000000 {
@@ -116,6 +124,10 @@
 		ranges = <0x0 0xf 0xf4000000 0x2000000>;
 	};
 
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;

arch/powerpc/boot/dts/fsl/b4420si-post.dtsi

@@ -80,20 +80,9 @@
 		compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0";
 	};
 
-/include/ "qoriq-clockgen2.dtsi"
 	global-utilities@e1000 {
-		compatible = "fsl,b4420-clockgen", "fsl,qoriq-clockgen-2.0";
-
-		mux0: mux0@0 {
-			#clock-cells = <0>;
-			reg = <0x0 0x4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				<&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0", "pll0-div2", "pll0-div4",
-				"pll1", "pll1-div2", "pll1-div4";
-			clock-output-names = "cmux0";
-		};
+		compatible = "fsl,b4420-clockgen", "fsl,b4-clockgen",
+			      "fsl,qoriq-clockgen-2.0";
 	};
 
 	rcpm: global-utilities@e2000 {

arch/powerpc/boot/dts/fsl/b4860si-post.dtsi

@@ -167,6 +167,75 @@
 	};
 };
 
+&qportals {
+	qportal14: qman-portal@38000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+		interrupts = <132 0x2 0 0>;
+		cell-index = <0xe>;
+	};
+	qportal15: qman-portal@3c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+		interrupts = <134 0x2 0 0>;
+		cell-index = <0xf>;
+	};
+	qportal16: qman-portal@40000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+		interrupts = <136 0x2 0 0>;
+		cell-index = <0x10>;
+	};
+	qportal17: qman-portal@44000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+		interrupts = <138 0x2 0 0>;
+		cell-index = <0x11>;
+	};
+	qportal18: qman-portal@48000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x48000 0x4000>, <0x1012000 0x1000>;
+		interrupts = <140 0x2 0 0>;
+		cell-index = <0x12>;
+	};
+	qportal19: qman-portal@4c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4c000 0x4000>, <0x1013000 0x1000>;
+		interrupts = <142 0x2 0 0>;
+		cell-index = <0x13>;
+	};
+	qportal20: qman-portal@50000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x50000 0x4000>, <0x1014000 0x1000>;
+		interrupts = <144 0x2 0 0>;
+		cell-index = <0x14>;
+	};
+	qportal21: qman-portal@54000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x54000 0x4000>, <0x1015000 0x1000>;
+		interrupts = <146 0x2 0 0>;
+		cell-index = <0x15>;
+	};
+	qportal22: qman-portal@58000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x58000 0x4000>, <0x1016000 0x1000>;
+		interrupts = <148 0x2 0 0>;
+		cell-index = <0x16>;
+	};
+	qportal23: qman-portal@5c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x5c000 0x4000>, <0x1017000 0x1000>;
+		interrupts = <150 0x2 0 0>;
+		cell-index = <0x17>;
+	};
+	qportal24: qman-portal@60000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x60000 0x4000>, <0x1018000 0x1000>;
+		interrupts = <152 0x2 0 0>;
+		cell-index = <0x18>;
+	};
+};
+
 &soc {
 	ddr2: memory-controller@9000 {
 		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
@@ -182,20 +251,9 @@
 		compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0";
 	};
 
-/include/ "qoriq-clockgen2.dtsi"
 	global-utilities@e1000 {
-		compatible = "fsl,b4860-clockgen", "fsl,qoriq-clockgen-2.0";
-
-		mux0: mux0@0 {
-			#clock-cells = <0>;
-			reg = <0x0 0x4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				<&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0", "pll0-div2", "pll0-div4",
-				"pll1", "pll1-div2", "pll1-div4";
-			clock-output-names = "cmux0";
-		};
+		compatible = "fsl,b4860-clockgen", "fsl,b4-clockgen",
+			      "fsl,qoriq-clockgen-2.0";
 	};
 
 	rcpm: global-utilities@e2000 {

arch/powerpc/boot/dts/fsl/b4si-post.dtsi

@@ -37,6 +37,16 @@
 	alloc-ranges = <0 0 0x10000 0>;
 };
 
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
@@ -210,6 +220,97 @@
 	};
 };
 
+&qportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <104 0x2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <106 0x2 0 0>;
+		cell-index = <0x1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <108 0x2 0 0>;
+		cell-index = <0x2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <110 0x2 0 0>;
+		cell-index = <0x3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <112 0x2 0 0>;
+		cell-index = <0x4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <114 0x2 0 0>;
+		cell-index = <0x5>;
+	};
+	qportal6: qman-portal@18000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <116 0x2 0 0>;
+		cell-index = <0x6>;
+	};
+	qportal7: qman-portal@1c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <118 0x2 0 0>;
+		cell-index = <0x7>;
+	};
+	qportal8: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <120 0x2 0 0>;
+		cell-index = <0x8>;
+	};
+	qportal9: qman-portal@24000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <122 0x2 0 0>;
+		cell-index = <0x9>;
+	};
+	qportal10: qman-portal@28000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+		interrupts = <124 0x2 0 0>;
+		cell-index = <0xa>;
+	};
+	qportal11: qman-portal@2c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+		interrupts = <126 0x2 0 0>;
+		cell-index = <0xb>;
+	};
+	qportal12: qman-portal@30000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+		interrupts = <128 0x2 0 0>;
+		cell-index = <0xc>;
+	};
+	qportal13: qman-portal@34000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+		interrupts = <130 0x2 0 0>;
+		cell-index = <0xd>;
+	};
+};
+
 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -296,9 +397,21 @@
 		fsl,liodn-bits = <12>;
 	};
 
+/include/ "qoriq-clockgen2.dtsi"
 	clockgen: global-utilities@e1000 {
 		compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
 		reg = <0xe1000 0x1000>;
+
+		mux0: mux0@0 {
+			#clock-cells = <0>;
+			reg = <0x0 0x4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				<&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll0-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux0";
+		};
 	};
 
 	rcpm: global-utilities@e2000 {
@@ -343,6 +456,11 @@
 /include/ "qoriq-duart-1.dtsi"
 /include/ "qoriq-sec5.3-0.dtsi"
 
+/include/ "qoriq-qman3.dtsi"
+	qman: qman@318000 {
+		interrupts = <16 2 1 28>;
+	};
+
 /include/ "qoriq-bman1.dtsi"
 	bman: bman@31a000 {
 		interrupts = <16 2 1 29>;

arch/powerpc/boot/dts/fsl/p1023si-post.dtsi

@@ -37,6 +37,16 @@
 	alloc-ranges = <0 0 0x10 0>;
 };
 
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
 &lbc {
 	#address-cells = <2>;
 	#size-cells = <1>;
@@ -102,6 +112,31 @@
 	};
 };
 
+&qportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x100000 0x1000>;
+		interrupts = <29 2 0 0>;
+		cell-index = <0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x101000 0x1000>;
+		interrupts = <31 2 0 0>;
+		cell-index = <1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x102000 0x1000>;
+		interrupts = <33 2 0 0>;
+		cell-index = <2>;
+	};
+};
+
 &bportals {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -248,6 +283,14 @@
 /include/ "pq3-mpic.dtsi"
 /include/ "pq3-mpic-timer-B.dtsi"
 
+	qman: qman@88000 {
+		compatible = "fsl,qman";
+		reg = <0x88000 0x1000>;
+		interrupts = <16 2 0 0>;
+		fsl,qman-portals = <&qportals>;
+		memory-region = <&qman_fqd &qman_pfdr>;
+	};
+
 	bman: bman@8a000 {
 		compatible = "fsl,bman";
 		reg = <0x8a000 0x1000>;

arch/powerpc/boot/dts/fsl/p2041si-post.dtsi

@@ -37,6 +37,16 @@
 	alloc-ranges = <0 0 0x10 0>;
 };
 
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
 &lbc {
 	compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
 	interrupts = <25 2 0 0>;
@@ -223,6 +233,8 @@
 
 /include/ "qoriq-bman1-portals.dtsi"
 
+/include/ "qoriq-qman1-portals.dtsi"
+
 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -415,5 +427,6 @@ crypto: crypto@300000 {
 		fsl,iommu-parent = <&pamu1>;
 	};
 
+/include/ "qoriq-qman1.dtsi"
 /include/ "qoriq-bman1.dtsi"
 };

arch/powerpc/boot/dts/fsl/p3041si-post.dtsi

@@ -37,6 +37,16 @@
 	alloc-ranges = <0 0 0x10 0>;
 };
 
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
 &lbc {
 	compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
 	interrupts = <25 2 0 0>;
@@ -250,6 +260,8 @@
 
 /include/ "qoriq-bman1-portals.dtsi"
 
+/include/ "qoriq-qman1-portals.dtsi"
+
 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -442,5 +454,6 @@ crypto: crypto@300000 {
 		fsl,iommu-parent = <&pamu1>;
 	};
 
+/include/ "qoriq-qman1.dtsi"
 /include/ "qoriq-bman1.dtsi"
 };

arch/powerpc/boot/dts/fsl/p4080si-post.dtsi

@@ -37,6 +37,16 @@
 	alloc-ranges = <0 0 0x10 0>;
 };
 
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
 &lbc {
 	compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
 	interrupts = <25 2 0 0>;
@@ -250,6 +260,8 @@
 
 /include/ "qoriq-bman1-portals.dtsi"
 
+/include/ "qoriq-qman1-portals.dtsi"
+
 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -498,5 +510,6 @@ crypto: crypto@300000 {
 		fsl,iommu-parent = <&pamu1>;
 	};
 
+/include/ "qoriq-qman1.dtsi"
 /include/ "qoriq-bman1.dtsi"
 };

arch/powerpc/boot/dts/fsl/p5020si-post.dtsi

@@ -37,6 +37,16 @@
 	alloc-ranges = <0 0 0x10000 0>;
 };
 
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
 &lbc {
 	compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
 	interrupts = <25 2 0 0>;
@@ -247,6 +257,8 @@
 
 /include/ "qoriq-bman1-portals.dtsi"
 
+/include/ "qoriq-qman1-portals.dtsi"
+
 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -428,6 +440,7 @@
 		fsl,iommu-parent = <&pamu1>;
 	};
 
+/include/ "qoriq-qman1.dtsi"
 /include/ "qoriq-bman1.dtsi"
 
 /include/ "qoriq-raid1.0-0.dtsi"

arch/powerpc/boot/dts/fsl/p5040si-post.dtsi

@@ -37,6 +37,16 @@
 	alloc-ranges = <0 0 0x10000 0>;
 };
 
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
 &lbc {
 	compatible = "fsl,p5040-elbc", "fsl,elbc", "simple-bus";
 	interrupts = <25 2 0 0>;
@@ -202,6 +212,8 @@
 
 /include/ "qoriq-bman1-portals.dtsi"
 
+/include/ "qoriq-qman1-portals.dtsi"
+
 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -407,5 +419,6 @@
 		fsl,iommu-parent = <&pamu4>;
 	};
 
+/include/ "qoriq-qman1.dtsi"
 /include/ "qoriq-bman1.dtsi"
 };

arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi

@@ -41,61 +41,61 @@
 		compatible = "fsl,qman-portal";
 		reg = <0x0 0x4000>, <0x100000 0x1000>;
 		interrupts = <104 2 0 0>;
-		fsl,qman-channel-id = <0x0>;
+		cell-index = <0x0>;
 	};
 	qportal1: qman-portal@4000 {
 		compatible = "fsl,qman-portal";
 		reg = <0x4000 0x4000>, <0x101000 0x1000>;
 		interrupts = <106 2 0 0>;
-		fsl,qman-channel-id = <1>;
+		cell-index = <1>;
 	};
 	qportal2: qman-portal@8000 {
 		compatible = "fsl,qman-portal";
 		reg = <0x8000 0x4000>, <0x102000 0x1000>;
 		interrupts = <108 2 0 0>;
-		fsl,qman-channel-id = <2>;
+		cell-index = <2>;
 	};
 	qportal3: qman-portal@c000 {
 		compatible = "fsl,qman-portal";
 		reg = <0xc000 0x4000>, <0x103000 0x1000>;
 		interrupts = <110 2 0 0>;
-		fsl,qman-channel-id = <3>;
+		cell-index = <3>;
 	};
 	qportal4: qman-portal@10000 {
 		compatible = "fsl,qman-portal";
 		reg = <0x10000 0x4000>, <0x104000 0x1000>;
 		interrupts = <112 2 0 0>;
-		fsl,qman-channel-id = <4>;
+		cell-index = <4>;
 	};
 	qportal5: qman-portal@14000 {
 		compatible = "fsl,qman-portal";
 		reg = <0x14000 0x4000>, <0x105000 0x1000>;
 		interrupts = <114 2 0 0>;
-		fsl,qman-channel-id = <5>;
+		cell-index = <5>;
 	};
 	qportal6: qman-portal@18000 {
 		compatible = "fsl,qman-portal";
 		reg = <0x18000 0x4000>, <0x106000 0x1000>;
 		interrupts = <116 2 0 0>;
-		fsl,qman-channel-id = <6>;
+		cell-index = <6>;
 	};
 
 	qportal7: qman-portal@1c000 {
 		compatible = "fsl,qman-portal";
 		reg = <0x1c000 0x4000>, <0x107000 0x1000>;
 		interrupts = <118 2 0 0>;
-		fsl,qman-channel-id = <7>;
+		cell-index = <7>;
 	};
 	qportal8: qman-portal@20000 {
 		compatible = "fsl,qman-portal";
 		reg = <0x20000 0x4000>, <0x108000 0x1000>;
 		interrupts = <120 2 0 0>;
-		fsl,qman-channel-id = <8>;
+		cell-index = <8>;
 	};
 	qportal9: qman-portal@24000 {
 		compatible = "fsl,qman-portal";
 		reg = <0x24000 0x4000>, <0x109000 0x1000>;
 		interrupts = <122 2 0 0>;
-		fsl,qman-channel-id = <9>;
+		cell-index = <9>;
 	};
 };

arch/powerpc/boot/dts/fsl/t1023si-post.dtsi

@@ -0,0 +1,330 @@
+/*
+ * T1023 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+&pci0 {
+	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+&pci1 {
+	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	interrupts = <21 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <21 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+&pci2 {
+	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <22 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <22 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,t1023-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,t1023-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,t1023-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,t1023-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,t1023-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <16>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v5.0",
+				"fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,t1023-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 27>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x1000>;
+		ranges = <0 0x20000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <128 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,t1023-device-config", "fsl,qoriq-device-config-2.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+/include/ "qoriq-clockgen2.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0";
+		mux0: mux0@0 {
+			#clock-cells = <0>;
+			reg = <0x0 4>;
+			compatible = "fsl,core-mux-clock";
+			clocks = <&pll0 0>, <&pll0 1>;
+			clock-names = "pll0_0", "pll0_1";
+			clock-output-names = "cmux0";
+		};
+		mux1: mux1@20 {
+			#clock-cells = <0>;
+			reg = <0x20 4>;
+			compatible = "fsl,core-mux-clock";
+			clocks = <&pll0 0>, <&pll0 1>;
+			clock-names = "pll0_0", "pll0_1";
+			clock-output-names = "cmux1";
+		};
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,t1023-rcpm", "fsl,qoriq-rcpm-2.0";
+		reg = <0xe2000 0x1000>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,t1023-sfp";
+		reg = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,t1023-serdes";
+		reg = <0xea000 0x4000>;
+	};
+
+	scfg: global-utilities@fc000 {
+		compatible = "fsl,t1023-scfg";
+		reg = <0xfc000 0x1000>;
+	};
+
+/include/ "elo3-dma-0.dtsi"
+/include/ "elo3-dma-1.dtsi"
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,t1023-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		sdhci,auto-cmd12;
+		no-1-8-v;
+	};
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+		phy_type = "utmi";
+		port0;
+	};
+/include/ "qoriq-usb2-dr-0.dtsi"
+	usb1: usb@211000 {
+		compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+		dr_mode = "host";
+		phy_type = "utmi";
+	};
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+
+/include/ "qoriq-sec5.0-0.dtsi"
+};

arch/powerpc/boot/dts/fsl/t1024si-post.dtsi

@@ -0,0 +1,100 @@
+/*
+ * T1024 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t1023si-post.dtsi"
+
+/ {
+	aliases {
+		vga = &display;
+		display = &display;
+	};
+
+	qe:qe@ffe140000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+	};
+};
+
+&soc {
+	display:display@180000 {
+		compatible = "fsl,t1024-diu", "fsl,diu";
+		reg = <0x180000 1000>;
+		interrupts = <74 2 0 0>;
+	};
+};
+
+&qe {
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <95 2 0 0  94 2 0 0>; //high:79 low:78
+	};
+
+	ucc@2000 {
+		cell-index = <1>;
+		reg = <0x2000 0x200>;
+		interrupts = <32>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2200 {
+		cell-index = <3>;
+		reg = <0x2200 0x200>;
+		interrupts = <34>;
+		interrupt-parent = <&qeic>;
+	};
+
+	muram@10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-muram", "fsl,cpm-muram";
+		ranges = <0x0 0x10000 0x6000>;
+
+		data-only@0 {
+			compatible = "fsl,qe-muram-data", "fsl,cpm-muram-data";
+			reg = <0x0 0x6000>;
+		};
+	};
+};

arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi

@@ -0,0 +1,87 @@
+/*
+ * T1024/T1023 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		dma0 = &dma0;
+		dma1 = &dma1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		sdhc = &sdhc;
+
+		crypto = &crypto;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e5500@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e5500@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&mux1>;
+			next-level-cache = <&L2_2>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};

arch/powerpc/boot/dts/fsl/t1040si-post.dtsi

@@ -37,6 +37,16 @@
 	alloc-ranges = <0 0 0x10000 0>;
 };
 
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
@@ -280,6 +290,73 @@
 	};
 };
 
+&qportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <104 0x2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <106 0x2 0 0>;
+		cell-index = <0x1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <108 0x2 0 0>;
+		cell-index = <0x2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <110 0x2 0 0>;
+		cell-index = <0x3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <112 0x2 0 0>;
+		cell-index = <0x4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <114 0x2 0 0>;
+		cell-index = <0x5>;
+	};
+	qportal6: qman-portal@18000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <116 0x2 0 0>;
+		cell-index = <0x6>;
+	};
+	qportal7: qman-portal@1c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <118 0x2 0 0>;
+		cell-index = <0x7>;
+	};
+	qportal8: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <120 0x2 0 0>;
+		cell-index = <0x8>;
+	};
+	qportal9: qman-portal@24000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <122 0x2 0 0>;
+		cell-index = <0x9>;
+	};
+};
+
 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -463,5 +540,6 @@
 		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
 	};
 /include/ "qoriq-sec5.0-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
 /include/ "qoriq-bman1.dtsi"
 };

arch/powerpc/boot/dts/fsl/t2081si-post.dtsi

@@ -37,6 +37,16 @@
 	alloc-ranges = <0 0 0x10000 0>;
 };
 
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
@@ -326,6 +336,121 @@
 	};
 };
 
+&qportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <104 0x2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <106 0x2 0 0>;
+		cell-index = <0x1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <108 0x2 0 0>;
+		cell-index = <0x2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <110 0x2 0 0>;
+		cell-index = <0x3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <112 0x2 0 0>;
+		cell-index = <0x4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <114 0x2 0 0>;
+		cell-index = <0x5>;
+	};
+	qportal6: qman-portal@18000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <116 0x2 0 0>;
+		cell-index = <0x6>;
+	};
+	qportal7: qman-portal@1c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <118 0x2 0 0>;
+		cell-index = <0x7>;
+	};
+	qportal8: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <120 0x2 0 0>;
+		cell-index = <0x8>;
+	};
+	qportal9: qman-portal@24000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <122 0x2 0 0>;
+		cell-index = <0x9>;
+	};
+	qportal10: qman-portal@28000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+		interrupts = <124 0x2 0 0>;
+		cell-index = <0xa>;
+	};
+	qportal11: qman-portal@2c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+		interrupts = <126 0x2 0 0>;
+		cell-index = <0xb>;
+	};
+	qportal12: qman-portal@30000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+		interrupts = <128 0x2 0 0>;
+		cell-index = <0xc>;
+	};
+	qportal13: qman-portal@34000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+		interrupts = <130 0x2 0 0>;
+		cell-index = <0xd>;
+	};
+	qportal14: qman-portal@38000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+		interrupts = <132 0x2 0 0>;
+		cell-index = <0xe>;
+	};
+	qportal15: qman-portal@3c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+		interrupts = <134 0x2 0 0>;
+		cell-index = <0xf>;
+	};
+	qportal16: qman-portal@40000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+		interrupts = <136 0x2 0 0>;
+		cell-index = <0x10>;
+	};
+	qportal17: qman-portal@44000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+		interrupts = <138 0x2 0 0>;
+		cell-index = <0x11>;
+	};
+};
+
 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -417,7 +542,7 @@
 			compatible = "fsl,qoriq-core-mux-2.0";
 			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
 				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0", "pll0-div2", "pll1-div4",
+			clock-names = "pll0", "pll0-div2", "pll0-div4",
 				"pll1", "pll1-div2", "pll1-div4";
 			clock-output-names = "cmux0";
 		};
@@ -428,7 +553,7 @@
 			compatible = "fsl,qoriq-core-mux-2.0";
 			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
 				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0", "pll0-div2", "pll1-div4",
+			clock-names = "pll0", "pll0-div2", "pll0-div4",
 				"pll1", "pll1-div2", "pll1-div4";
 			clock-output-names = "cmux1";
 		};
@@ -502,6 +627,7 @@
 		phy_type = "utmi";
 	};
 /include/ "qoriq-sec5.2-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
 /include/ "qoriq-bman1.dtsi"
 
 	L2_1: l2-cache-controller@c20000 {

arch/powerpc/boot/dts/fsl/t4240si-post.dtsi

@@ -37,6 +37,16 @@
 	alloc-ranges = <0 0 0x10000 0>;
 };
 
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
@@ -556,6 +566,313 @@
 	};
 };
 
+&qportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <104 0x2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <106 0x2 0 0>;
+		cell-index = <0x1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <108 0x2 0 0>;
+		cell-index = <0x2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <110 0x2 0 0>;
+		cell-index = <0x3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <112 0x2 0 0>;
+		cell-index = <0x4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <114 0x2 0 0>;
+		cell-index = <0x5>;
+	};
+	qportal6: qman-portal@18000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <116 0x2 0 0>;
+		cell-index = <0x6>;
+	};
+	qportal7: qman-portal@1c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <118 0x2 0 0>;
+		cell-index = <0x7>;
+	};
+	qportal8: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <120 0x2 0 0>;
+		cell-index = <0x8>;
+	};
+	qportal9: qman-portal@24000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <122 0x2 0 0>;
+		cell-index = <0x9>;
+	};
+	qportal10: qman-portal@28000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+		interrupts = <124 0x2 0 0>;
+		cell-index = <0xa>;
+	};
+	qportal11: qman-portal@2c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+		interrupts = <126 0x2 0 0>;
+		cell-index = <0xb>;
+	};
+	qportal12: qman-portal@30000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+		interrupts = <128 0x2 0 0>;
+		cell-index = <0xc>;
+	};
+	qportal13: qman-portal@34000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+		interrupts = <130 0x2 0 0>;
+		cell-index = <0xd>;
+	};
+	qportal14: qman-portal@38000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+		interrupts = <132 0x2 0 0>;
+		cell-index = <0xe>;
+	};
+	qportal15: qman-portal@3c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+		interrupts = <134 0x2 0 0>;
+		cell-index = <0xf>;
+	};
+	qportal16: qman-portal@40000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+		interrupts = <136 0x2 0 0>;
+		cell-index = <0x10>;
+	};
+	qportal17: qman-portal@44000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+		interrupts = <138 0x2 0 0>;
+		cell-index = <0x11>;
+	};
+	qportal18: qman-portal@48000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x48000 0x4000>, <0x1012000 0x1000>;
+		interrupts = <140 0x2 0 0>;
+		cell-index = <0x12>;
+	};
+	qportal19: qman-portal@4c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4c000 0x4000>, <0x1013000 0x1000>;
+		interrupts = <142 0x2 0 0>;
+		cell-index = <0x13>;
+	};
+	qportal20: qman-portal@50000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x50000 0x4000>, <0x1014000 0x1000>;
+		interrupts = <144 0x2 0 0>;
+		cell-index = <0x14>;
+	};
+	qportal21: qman-portal@54000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x54000 0x4000>, <0x1015000 0x1000>;
+		interrupts = <146 0x2 0 0>;
+		cell-index = <0x15>;
+	};
+	qportal22: qman-portal@58000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x58000 0x4000>, <0x1016000 0x1000>;
+		interrupts = <148 0x2 0 0>;
+		cell-index = <0x16>;
+	};
+	qportal23: qman-portal@5c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x5c000 0x4000>, <0x1017000 0x1000>;
+		interrupts = <150 0x2 0 0>;
+		cell-index = <0x17>;
+	};
+	qportal24: qman-portal@60000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x60000 0x4000>, <0x1018000 0x1000>;
+		interrupts = <152 0x2 0 0>;
+		cell-index = <0x18>;
+	};
+	qportal25: qman-portal@64000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x64000 0x4000>, <0x1019000 0x1000>;
+		interrupts = <154 0x2 0 0>;
+		cell-index = <0x19>;
+	};
+	qportal26: qman-portal@68000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x68000 0x4000>, <0x101a000 0x1000>;
+		interrupts = <156 0x2 0 0>;
+		cell-index = <0x1a>;
+	};
+	qportal27: qman-portal@6c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x6c000 0x4000>, <0x101b000 0x1000>;
+		interrupts = <158 0x2 0 0>;
+		cell-index = <0x1b>;
+	};
+	qportal28: qman-portal@70000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x70000 0x4000>, <0x101c000 0x1000>;
+		interrupts = <160 0x2 0 0>;
+		cell-index = <0x1c>;
+	};
+	qportal29: qman-portal@74000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x74000 0x4000>, <0x101d000 0x1000>;
+		interrupts = <162 0x2 0 0>;
+		cell-index = <0x1d>;
+	};
+	qportal30: qman-portal@78000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x78000 0x4000>, <0x101e000 0x1000>;
+		interrupts = <164 0x2 0 0>;
+		cell-index = <0x1e>;
+	};
+	qportal31: qman-portal@7c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x7c000 0x4000>, <0x101f000 0x1000>;
+		interrupts = <166 0x2 0 0>;
+		cell-index = <0x1f>;
+	};
+	qportal32: qman-portal@80000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x80000 0x4000>, <0x1020000 0x1000>;
+		interrupts = <168 0x2 0 0>;
+		cell-index = <0x20>;
+	};
+	qportal33: qman-portal@84000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x84000 0x4000>, <0x1021000 0x1000>;
+		interrupts = <170 0x2 0 0>;
+		cell-index = <0x21>;
+	};
+	qportal34: qman-portal@88000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x88000 0x4000>, <0x1022000 0x1000>;
+		interrupts = <172 0x2 0 0>;
+		cell-index = <0x22>;
+	};
+	qportal35: qman-portal@8c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8c000 0x4000>, <0x1023000 0x1000>;
+		interrupts = <174 0x2 0 0>;
+		cell-index = <0x23>;
+	};
+	qportal36: qman-portal@90000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x90000 0x4000>, <0x1024000 0x1000>;
+		interrupts = <384 0x2 0 0>;
+		cell-index = <0x24>;
+	};
+	qportal37: qman-portal@94000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x94000 0x4000>, <0x1025000 0x1000>;
+		interrupts = <386 0x2 0 0>;
+		cell-index = <0x25>;
+	};
+	qportal38: qman-portal@98000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x98000 0x4000>, <0x1026000 0x1000>;
+		interrupts = <388 0x2 0 0>;
+		cell-index = <0x26>;
+	};
+	qportal39: qman-portal@9c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x9c000 0x4000>, <0x1027000 0x1000>;
+		interrupts = <390 0x2 0 0>;
+		cell-index = <0x27>;
+	};
+	qportal40: qman-portal@a0000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xa0000 0x4000>, <0x1028000 0x1000>;
+		interrupts = <392 0x2 0 0>;
+		cell-index = <0x28>;
+	};
+	qportal41: qman-portal@a4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xa4000 0x4000>, <0x1029000 0x1000>;
+		interrupts = <394 0x2 0 0>;
+		cell-index = <0x29>;
+	};
+	qportal42: qman-portal@a8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xa8000 0x4000>, <0x102a000 0x1000>;
+		interrupts = <396 0x2 0 0>;
+		cell-index = <0x2a>;
+	};
+	qportal43: qman-portal@ac000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xac000 0x4000>, <0x102b000 0x1000>;
+		interrupts = <398 0x2 0 0>;
+		cell-index = <0x2b>;
+	};
+	qportal44: qman-portal@b0000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xb0000 0x4000>, <0x102c000 0x1000>;
+		interrupts = <400 0x2 0 0>;
+		cell-index = <0x2c>;
+	};
+	qportal45: qman-portal@b4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xb4000 0x4000>, <0x102d000 0x1000>;
+		interrupts = <402 0x2 0 0>;
+		cell-index = <0x2d>;
+	};
+	qportal46: qman-portal@b8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xb8000 0x4000>, <0x102e000 0x1000>;
+		interrupts = <404 0x2 0 0>;
+		cell-index = <0x2e>;
+	};
+	qportal47: qman-portal@bc000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xbc000 0x4000>, <0x102f000 0x1000>;
+		interrupts = <406 0x2 0 0>;
+		cell-index = <0x2f>;
+	};
+	qportal48: qman-portal@c0000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc0000 0x4000>, <0x1030000 0x1000>;
+		interrupts = <408 0x2 0 0>;
+		cell-index = <0x30>;
+	};
+	qportal49: qman-portal@c4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc4000 0x4000>, <0x1031000 0x1000>;
+		interrupts = <410 0x2 0 0>;
+		cell-index = <0x31>;
+	};
+};
+
 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -748,6 +1065,7 @@
 /include/ "qoriq-sata2-0.dtsi"
 /include/ "qoriq-sata2-1.dtsi"
 /include/ "qoriq-sec5.0-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
 /include/ "qoriq-bman1.dtsi"
 
 	L2_1: l2-cache-controller@c20000 {

arch/powerpc/boot/dts/kmcoge4.dts

@@ -34,6 +34,14 @@
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
 	};
 
 	dcsr: dcsr@f00000000 {
@@ -44,6 +52,10 @@
 		ranges = <0x0 0xf 0xf4000000 0x200000>;
 	};
 
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;

arch/powerpc/boot/dts/oca4080.dts

@@ -58,6 +58,14 @@
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
 	};
 
 	dcsr: dcsr@f00000000 {
@@ -68,6 +76,10 @@
 		ranges = <0x0 0xf 0xf4000000 0x200000>;
 	};
 
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;

arch/powerpc/boot/dts/p1023rdb.dts

@@ -56,6 +56,18 @@
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	qportals: qman-portals@ff000000 {
+		ranges = <0x0 0xf 0xff000000 0x200000>;
 	};
 
 	bportals: bman-portals@ff200000 {

arch/powerpc/boot/dts/p2041rdb.dts

@@ -54,6 +54,14 @@
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
 	};
 
 	dcsr: dcsr@f00000000 {
@@ -64,6 +72,10 @@
 		ranges = <0x0 0xf 0xf4000000 0x200000>;
 	};
 
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;

arch/powerpc/boot/dts/p3041ds.dts

@@ -54,6 +54,14 @@
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
 	};
 
 	dcsr: dcsr@f00000000 {
@@ -64,6 +72,10 @@
 		ranges = <0x0 0xf 0xf4000000 0x200000>;
 	};
 
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;

arch/powerpc/boot/dts/p4080ds.dts

@@ -54,6 +54,14 @@
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
 	};
 
 	dcsr: dcsr@f00000000 {
@@ -64,6 +72,10 @@
 		ranges = <0x0 0xf 0xf4000000 0x200000>;
 	};
 
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;

arch/powerpc/boot/dts/p5020ds.dts

@@ -54,6 +54,14 @@
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
 	};
 
 	dcsr: dcsr@f00000000 {
@@ -64,6 +72,10 @@
 		ranges = <0x0 0xf 0xf4000000 0x200000>;
 	};
 
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;

arch/powerpc/boot/dts/p5040ds.dts

@@ -54,6 +54,14 @@
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
 	};
 
 	dcsr: dcsr@f00000000 {
@@ -64,6 +72,10 @@
 		ranges = <0x0 0xf 0xf4000000 0x200000>;
 	};
 
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;

arch/powerpc/boot/dts/t1023rdb.dts

@@ -0,0 +1,151 @@
+/*
+ * T1023 RDB Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t102xsi-pre.dtsi"
+
+/ {
+	model = "fsl,T1023RDB";
+	compatible = "fsl,T1023RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  1 0 0xf 0xff800000 0x00010000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25fl512s";
+				reg = <0>;
+				spi-max-frequency = <10000000>; /* input clk */
+			};
+		};
+
+		i2c@118000 {
+			eeprom@50 {
+				compatible = "st,m24256";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+				interrupts = <0x5 0x1 0 0>;
+			};
+		};
+
+		i2c@118100 {
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "fsl/t1023si-post.dtsi"

arch/powerpc/boot/dts/t1024qds.dts

@@ -0,0 +1,251 @@
+/*
+ * T1024 QDS Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t102xsi-pre.dtsi"
+
+/ {
+	model = "fsl,T1024QDS";
+	compatible = "fsl,T1024QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,tetra-fpga", "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q128a11";  /* 16MB */
+				reg = <0>;
+				spi-max-frequency = <10000000>;
+			};
+
+			flash@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "sst,sst25wf040";  /* 512KB */
+				reg = <1>;
+				spi-max-frequency = <10000000>;
+			};
+
+			flash@2 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "eon,en25s64";   /* 8MB */
+				reg = <2>;
+				spi-max-frequency = <10000000>;
+			};
+
+			slic@2 {
+				compatible = "maxim,ds26522";
+				reg = <2>;
+				spi-max-frequency = <2000000>;
+			};
+
+			slic@3 {
+				compatible = "maxim,ds26522";
+				reg = <3>;
+				spi-max-frequency = <2000000>;
+			};
+		};
+
+		i2c@118000 {
+			pca9547@77 {
+				compatible = "nxp,pca9547";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					eeprom@50 {
+						compatible = "atmel,24c512";
+						reg = <0x50>;
+					};
+
+					eeprom@51 {
+						compatible = "atmel,24c02";
+						reg = <0x51>;
+					};
+
+					eeprom@57 {
+						compatible = "atmel,24c02";
+						reg = <0x57>;
+					};
+				};
+
+				i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+
+					ina220@40 {
+						compatible = "ti,ina220";
+						reg = <0x40>;
+						shunt-resistor = <1000>;
+					};
+
+					ina220@41 {
+						compatible = "ti,ina220";
+						reg = <0x41>;
+						shunt-resistor = <1000>;
+					};
+				};
+
+				i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+
+					adt7461@4c {
+						/* Thermal Monitor */
+						compatible = "adi,adt7461";
+						reg = <0x4c>;
+					};
+
+					eeprom@55 {
+						compatible = "atmel,24c02";
+						reg = <0x55>;
+					};
+
+					eeprom@56 {
+						compatible = "atmel,24c512";
+						reg = <0x56>;
+					};
+
+					eeprom@57 {
+						compatible = "atmel,24c512";
+						reg = <0x57>;
+					};
+				};
+			};
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x5 0x1 0 0>;
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "fsl/t1024si-post.dtsi"

arch/powerpc/boot/dts/t1024rdb.dts

@@ -0,0 +1,185 @@
+/*
+ * T1024 RDB Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t102xsi-pre.dtsi"
+
+/ {
+	model = "fsl,T1024RDB";
+	compatible = "fsl,T1024RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		board-control@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,t1024-cpld";
+			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+			bank-width = <1>;
+			device-width = <1>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q512ax3";
+				reg = <0>;
+				spi-max-frequency = <10000000>; /* input clk */
+			};
+
+			slic@1 {
+				compatible = "maxim,ds26522";
+				reg = <1>;
+				spi-max-frequency = <2000000>;
+			};
+
+			slic@2 {
+				compatible = "maxim,ds26522";
+				reg = <2>;
+				spi-max-frequency = <2000000>;
+			};
+		};
+
+		i2c@118000 {
+			adt7461@4c {
+				/* Thermal Monitor */
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c256";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+		};
+
+		i2c@118100 {
+			pca9546@77 {
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "fsl/t1024si-post.dtsi"

arch/powerpc/boot/dts/t104xqds.dtsi

@@ -47,6 +47,14 @@
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
 	};
 
 	ifc: localbus@ffe124000 {
@@ -92,6 +100,10 @@
 		ranges = <0x0 0xf 0xf4000000 0x2000000>;
 	};
 
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;

arch/powerpc/boot/dts/t104xrdb.dtsi

@@ -42,6 +42,14 @@
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
 	};
 
 	ifc: localbus@ffe124000 {
@@ -83,6 +91,10 @@
 		ranges = <0x0 0xf 0xf4000000 0x2000000>;
 	};
 
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;

arch/powerpc/boot/dts/t208xqds.dtsi

@@ -48,6 +48,14 @@
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
 	};
 
 	ifc: localbus@ffe124000 {
@@ -93,6 +101,10 @@
 		ranges = <0x0 0xf 0xf4000000 0x2000000>;
 	};
 
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;

arch/powerpc/boot/dts/t208xrdb.dtsi

@@ -48,6 +48,14 @@
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
 	};
 
 	ifc: localbus@ffe124000 {
@@ -94,6 +102,10 @@
 		ranges = <0x0 0xf 0xf4000000 0x2000000>;
 	};
 
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;

arch/powerpc/boot/dts/t4240qds.dts

@@ -109,6 +109,14 @@
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
 	};
 
 	dcsr: dcsr@f00000000 {
@@ -119,6 +127,10 @@
 		ranges = <0x0 0xf 0xf4000000 0x2000000>;
 	};
 
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;

arch/powerpc/boot/dts/t4240rdb.dts

@@ -78,6 +78,14 @@
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
 	};
 
 	dcsr: dcsr@f00000000 {
@@ -88,6 +96,10 @@
 		ranges = <0x0 0xf 0xf4000000 0x2000000>;
 	};
 
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;

arch/powerpc/configs/85xx/xes_mpc85xx_defconfig

@@ -108,7 +108,7 @@ CONFIG_SENSORS_LM90=y
 CONFIG_WATCHDOG=y
 CONFIG_USB=y
 CONFIG_USB_MON=y
-CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1760=y
 CONFIG_USB_STORAGE=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y

arch/powerpc/include/asm/cputable.h

@@ -368,7 +368,7 @@ enum {
 	    CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | \
 	    CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE)
 #define CPU_FTRS_CLASSIC32	(CPU_FTR_COMMON | CPU_FTR_USE_TB)
-#define CPU_FTRS_8XX	(CPU_FTR_USE_TB)
+#define CPU_FTRS_8XX	(CPU_FTR_USE_TB | CPU_FTR_NOEXECUTE)
 #define CPU_FTRS_40X	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
 #define CPU_FTRS_44X	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
 #define CPU_FTRS_440x6	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE | \

arch/powerpc/include/asm/mmu-8xx.h

@@ -27,6 +27,19 @@
 #define MI_Ks		0x80000000	/* Should not be set */
 #define MI_Kp		0x40000000	/* Should always be set */
 
+/*
+ * All pages' PP exec bits are set to 000, which means Execute for Supervisor
+ * and no Execute for User.
+ * Then we use the APG to say whether accesses are according to Page rules,
+ * "all Supervisor" rules (Exec for all) and "all User" rules (Exec for noone)
+ * Therefore, we define 4 APG groups. msb is _PAGE_EXEC, lsb is _PAGE_USER
+ * 0 (00) => Not User, no exec => 11 (all accesses performed as user)
+ * 1 (01) => User but no exec => 11 (all accesses performed as user)
+ * 2 (10) => Not User, exec => 01 (rights according to page definition)
+ * 3 (11) => User, exec => 00 (all accesses performed as supervisor)
+ */
+#define MI_APG_INIT	0xf4ffffff
+
 /* The effective page number register.  When read, contains the information
  * about the last instruction TLB miss.  When MI_RPN is written, bits in
  * this register are used to create the TLB entry.
@@ -87,6 +100,19 @@
 #define MD_Ks		0x80000000	/* Should not be set */
 #define MD_Kp		0x40000000	/* Should always be set */
 
+/*
+ * All pages' PP data bits are set to either 000 or 011, which means
+ * respectively RW for Supervisor and no access for User, or RO for
+ * Supervisor and no access for user.
+ * Then we use the APG to say whether accesses are according to Page rules or
+ * "all Supervisor" rules (Access to all)
+ * Therefore, we define 2 APG groups. lsb is _PAGE_USER
+ * 0 => No user => 01 (all accesses performed according to page definition)
+ * 1 => User => 00 (all accesses performed as supervisor
+ *                                 according to page definition)
+ */
+#define MD_APG_INIT	0x4fffffff
+
 /* The effective page number register.  When read, contains the information
  * about the last instruction TLB miss.  When MD_RPN is written, bits in
  * this register are used to create the TLB entry.
@@ -145,7 +171,14 @@ typedef struct {
 } mm_context_t;
 #endif /* !__ASSEMBLY__ */
 
+#if (PAGE_SHIFT == 12)
 #define mmu_virtual_psize	MMU_PAGE_4K
+#elif (PAGE_SHIFT == 14)
+#define mmu_virtual_psize	MMU_PAGE_16K
+#else
+#error "Unsupported PAGE_SIZE"
+#endif
+
 #define mmu_linear_psize	MMU_PAGE_8M
 
 #endif /* _ASM_POWERPC_MMU_8XX_H_ */

arch/powerpc/include/asm/pgtable-ppc32.h

@@ -170,24 +170,6 @@ static inline unsigned long pte_update(pte_t *p,
 #ifdef PTE_ATOMIC_UPDATES
 	unsigned long old, tmp;
 
-#ifdef CONFIG_PPC_8xx
-	unsigned long tmp2;
-
-	__asm__ __volatile__("\
-1:	lwarx	%0,0,%4\n\
-	andc	%1,%0,%5\n\
-	or	%1,%1,%6\n\
-	/* 0x200 == Extended encoding, bit 22 */ \
-	/* Bit 22 has to be 1 when _PAGE_USER is unset and _PAGE_RO is set */ \
-	rlwimi	%1,%1,32-1,0x200\n /* get _PAGE_RO */ \
-	rlwinm	%3,%1,32-2,0x200\n /* get _PAGE_USER */ \
-	andc	%1,%1,%3\n\
-	stwcx.	%1,0,%4\n\
-	bne-	1b"
-	: "=&r" (old), "=&r" (tmp), "=m" (*p), "=&r" (tmp2)
-	: "r" (p), "r" (clr), "r" (set), "m" (*p)
-	: "cc" );
-#else /* CONFIG_PPC_8xx */
 	__asm__ __volatile__("\
 1:	lwarx	%0,0,%3\n\
 	andc	%1,%0,%4\n\
@@ -198,7 +180,6 @@ static inline unsigned long pte_update(pte_t *p,
 	: "=&r" (old), "=&r" (tmp), "=m" (*p)
 	: "r" (p), "r" (clr), "r" (set), "m" (*p)
 	: "cc" );
-#endif /* CONFIG_PPC_8xx */
 #else /* PTE_ATOMIC_UPDATES */
 	unsigned long old = pte_val(*p);
 	*p = __pte((old & ~clr) | set);

arch/powerpc/include/asm/pte-8xx.h

@@ -34,35 +34,32 @@
 #define _PAGE_SPECIAL	0x0008	/* SW entry, forced to 0 by the TLB miss */
 #define _PAGE_DIRTY	0x0100	/* C: page changed */
 
-/* These 4 software bits must be masked out when the entry is loaded
- * into the TLB, 1 SW bit left(0x0080).
+/* These 4 software bits must be masked out when the L2 entry is loaded
+ * into the TLB.
  */
-#define _PAGE_GUARDED	0x0010	/* software: guarded access */
-#define _PAGE_ACCESSED	0x0020	/* software: page referenced */
-#define _PAGE_WRITETHRU	0x0040	/* software: caching is write through */
+#define _PAGE_GUARDED	0x0010	/* Copied to L1 G entry in DTLB */
+#define _PAGE_USER	0x0020	/* Copied to L1 APG lsb */
+#define _PAGE_EXEC	0x0040	/* Copied to L1 APG */
+#define _PAGE_WRITETHRU	0x0080	/* software: caching is write through */
+#define _PAGE_ACCESSED	0x0800	/* software: page referenced */
 
-/* Setting any bits in the nibble with the follow two controls will
- * require a TLB exception handler change.  It is assumed unused bits
- * are always zero.
- */
-#define _PAGE_RO	0x0400	/* lsb PP bits */
-#define _PAGE_USER	0x0800	/* msb PP bits */
-/* set when _PAGE_USER is unset and _PAGE_RO is set */
-#define _PAGE_KNLRO	0x0200
+#define _PAGE_RO	0x0600	/* Supervisor RO, User no access */
 
 #define _PMD_PRESENT	0x0001
 #define _PMD_BAD	0x0ff0
 #define _PMD_PAGE_MASK	0x000c
 #define _PMD_PAGE_8M	0x000c
 
-#define _PTE_NONE_MASK _PAGE_KNLRO
-
 /* Until my rework is finished, 8xx still needs atomic PTE updates */
 #define PTE_ATOMIC_UPDATES	1
 
 /* We need to add _PAGE_SHARED to kernel pages */
-#define _PAGE_KERNEL_RO	(_PAGE_SHARED | _PAGE_RO | _PAGE_KNLRO)
-#define _PAGE_KERNEL_ROX	(_PAGE_EXEC | _PAGE_RO | _PAGE_KNLRO)
+#define _PAGE_KERNEL_RO		(_PAGE_SHARED | _PAGE_RO)
+#define _PAGE_KERNEL_ROX	(_PAGE_SHARED | _PAGE_RO | _PAGE_EXEC)
+#define _PAGE_KERNEL_RW		(_PAGE_SHARED | _PAGE_DIRTY | _PAGE_RW | \
+				 _PAGE_HWWRITE)
+#define _PAGE_KERNEL_RWX	(_PAGE_SHARED | _PAGE_DIRTY | _PAGE_RW | \
+				 _PAGE_HWWRITE | _PAGE_EXEC)
 
 #endif /* __KERNEL__ */
 #endif /*  _ASM_POWERPC_PTE_8xx_H */

arch/powerpc/kernel/head_8xx.S

@@ -48,6 +48,19 @@
 	mtspr	spr, reg
 #endif
 
+/* Macro to test if an address is a kernel address */
+#if CONFIG_TASK_SIZE <= 0x80000000 && CONFIG_PAGE_OFFSET >= 0x80000000
+#define IS_KERNEL(tmp, addr)		\
+	andis.	tmp, addr, 0x8000	/* Address >= 0x80000000 */
+#define BRANCH_UNLESS_KERNEL(label)	beq	label
+#else
+#define IS_KERNEL(tmp, addr)		\
+	rlwinm	tmp, addr, 16, 16, 31;	\
+	cmpli	cr0, tmp, PAGE_OFFSET >> 16
+#define BRANCH_UNLESS_KERNEL(label)	blt	label
+#endif
+
+
 /*
  * Value for the bits that have fixed value in RPN entries.
  * Also used for tagging DAR for DTLBerror.
@@ -116,13 +129,13 @@ turn_on_mmu:
  */
 #define EXCEPTION_PROLOG	\
 	EXCEPTION_PROLOG_0;	\
+	mfcr	r10;		\
 	EXCEPTION_PROLOG_1;	\
 	EXCEPTION_PROLOG_2
 
 #define EXCEPTION_PROLOG_0	\
 	mtspr	SPRN_SPRG_SCRATCH0,r10;	\
-	mtspr	SPRN_SPRG_SCRATCH1,r11;	\
-	mfcr	r10
+	mtspr	SPRN_SPRG_SCRATCH1,r11
 
 #define EXCEPTION_PROLOG_1	\
 	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel */ \
@@ -162,7 +175,6 @@ turn_on_mmu:
  * Exception exit code.
  */
 #define EXCEPTION_EPILOG_0	\
-	mtcr	r10;		\
 	mfspr	r10,SPRN_SPRG_SCRATCH0;	\
 	mfspr	r11,SPRN_SPRG_SCRATCH1
 
@@ -297,19 +309,22 @@ SystemCall:
  * We have to use the MD_xxx registers for the tablewalk because the
  * equivalent MI_xxx registers only perform the attribute functions.
  */
+
+#ifdef CONFIG_8xx_CPU15
+#define INVALIDATE_ADJACENT_PAGES_CPU15(tmp, addr)	\
+	addi	tmp, addr, PAGE_SIZE;	\
+	tlbie	tmp;			\
+	addi	tmp, addr, -PAGE_SIZE;	\
+	tlbie	tmp
+#else
+#define INVALIDATE_ADJACENT_PAGES_CPU15(tmp, addr)
+#endif
+
 InstructionTLBMiss:
 #ifdef CONFIG_8xx_CPU6
-	mtspr	SPRN_DAR, r3
+	mtspr	SPRN_SPRG_SCRATCH2, r3
 #endif
 	EXCEPTION_PROLOG_0
-	mtspr	SPRN_SPRG_SCRATCH2, r10
-	mfspr	r10, SPRN_SRR0	/* Get effective address of fault */
-#ifdef CONFIG_8xx_CPU15
-	addi	r11, r10, PAGE_SIZE
-	tlbie	r11
-	addi	r11, r10, -PAGE_SIZE
-	tlbie	r11
-#endif
 
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
@@ -317,24 +332,34 @@ InstructionTLBMiss:
 #ifdef CONFIG_MODULES
 	/* Only modules will cause ITLB Misses as we always
 	 * pin the first 8MB of kernel memory */
-	andis.	r11, r10, 0x8000	/* Address >= 0x80000000 */
-#endif
+	mfspr	r11, SPRN_SRR0	/* Get effective address of fault */
+	INVALIDATE_ADJACENT_PAGES_CPU15(r10, r11)
+	mfcr	r10
+	IS_KERNEL(r11, r11)
 	mfspr	r11, SPRN_M_TW	/* Get level 1 table */
-#ifdef CONFIG_MODULES
-	beq	3f
+	BRANCH_UNLESS_KERNEL(3f)
 	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@ha
 3:
+	mtcr	r10
+	mfspr	r10, SPRN_SRR0	/* Get effective address of fault */
+#else
+	mfspr	r10, SPRN_SRR0	/* Get effective address of fault */
+	INVALIDATE_ADJACENT_PAGES_CPU15(r11, r10)
+	mfspr	r11, SPRN_M_TW	/* Get level 1 table base address */
 #endif
 	/* Insert level 1 index */
 	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
 	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
 
-	/* Load the MI_TWC with the attributes for this "segment." */
-	MTSPR_CPU6(SPRN_MI_TWC, r11, r3)	/* Set segment attributes */
-	rlwinm	r11, r11,0,0,19	/* Extract page descriptor page address */
 	/* Extract level 2 index */
 	rlwinm	r10, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
-	lwzx	r10, r10, r11	/* Get the pte */
+	rlwimi	r10, r11, 0, 0, 32 - PAGE_SHIFT - 1	/* Add level 2 base */
+	lwz	r10, 0(r10)	/* Get the pte */
+
+	/* Insert the APG into the TWC from the Linux PTE. */
+	rlwimi	r11, r10, 0, 25, 26
+	/* Load the MI_TWC with the attributes for this "segment." */
+	MTSPR_CPU6(SPRN_MI_TWC, r11, r3)	/* Set segment attributes */
 
 #ifdef CONFIG_SWAP
 	rlwinm	r11, r10, 32-5, _PAGE_PRESENT
@@ -343,40 +368,41 @@ InstructionTLBMiss:
 #endif
 	li	r11, RPN_PATTERN
 	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 21 and 28 must be clear.
+	 * Software indicator bits 20-23 and 28 must be clear.
 	 * Software indicator bits 24, 25, 26, and 27 must be
 	 * set.  All other Linux PTE bits control the behavior
 	 * of the MMU.
 	 */
-	rlwimi	r10, r11, 0, 0x07f8	/* Set 24-27, clear 21-23,28 */
+	rlwimi	r10, r11, 0, 0x0ff8	/* Set 24-27, clear 20-23,28 */
 	MTSPR_CPU6(SPRN_MI_RPN, r10, r3)	/* Update TLB entry */
 
 	/* Restore registers */
 #ifdef CONFIG_8xx_CPU6
-	mfspr	r3, SPRN_DAR
-	mtspr	SPRN_DAR, r11	/* Tag DAR */
+	mfspr	r3, SPRN_SPRG_SCRATCH2
 #endif
-	mfspr	r10, SPRN_SPRG_SCRATCH2
 	EXCEPTION_EPILOG_0
 	rfi
 
 	. = 0x1200
 DataStoreTLBMiss:
 #ifdef CONFIG_8xx_CPU6
-	mtspr	SPRN_DAR, r3
+	mtspr	SPRN_SPRG_SCRATCH2, r3
 #endif
 	EXCEPTION_PROLOG_0
-	mtspr	SPRN_SPRG_SCRATCH2, r10
-	mfspr	r10, SPRN_MD_EPN
+	mfcr	r10
 
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	andis.	r11, r10, 0x8000
+	mfspr	r11, SPRN_MD_EPN
+	IS_KERNEL(r11, r11)
 	mfspr	r11, SPRN_M_TW	/* Get level 1 table */
-	beq	3f
+	BRANCH_UNLESS_KERNEL(3f)
 	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@ha
 3:
+	mtcr	r10
+	mfspr	r10, SPRN_MD_EPN
+
 	/* Insert level 1 index */
 	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
 	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
@@ -388,13 +414,13 @@ DataStoreTLBMiss:
 	rlwimi	r10, r11, 0, 0, 32 - PAGE_SHIFT - 1	/* Add level 2 base */
 	lwz	r10, 0(r10)	/* Get the pte */
 
-	/* Insert the Guarded flag into the TWC from the Linux PTE.
-	 * It is bit 27 of both the Linux PTE and the TWC (at least
+	/* Insert the Guarded flag and APG into the TWC from the Linux PTE.
+	 * It is bit 26-27 of both the Linux PTE and the TWC (at least
 	 * I got that right :-).  It will be better when we can put
 	 * this into the Linux pgd/pmd and load it in the operation
 	 * above.
 	 */
-	rlwimi	r11, r10, 0, 27, 27
+	rlwimi	r11, r10, 0, 26, 27
 	/* Insert the WriteThru flag into the TWC from the Linux PTE.
 	 * It is bit 25 in the Linux PTE and bit 30 in the TWC
 	 */
@@ -423,14 +449,14 @@ DataStoreTLBMiss:
 	 */
 	li	r11, RPN_PATTERN
 	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
+	rlwimi	r10, r11, 0, 20, 20	/* clear 20 */
 	MTSPR_CPU6(SPRN_MD_RPN, r10, r3)	/* Update TLB entry */
 
 	/* Restore registers */
 #ifdef CONFIG_8xx_CPU6
-	mfspr	r3, SPRN_DAR
+	mfspr	r3, SPRN_SPRG_SCRATCH2
 #endif
 	mtspr	SPRN_DAR, r11	/* Tag DAR */
-	mfspr	r10, SPRN_SPRG_SCRATCH2
 	EXCEPTION_EPILOG_0
 	rfi
 
@@ -456,6 +482,7 @@ InstructionTLBError:
 	. = 0x1400
 DataTLBError:
 	EXCEPTION_PROLOG_0
+	mfcr	r10
 
 	mfspr	r11, SPRN_DAR
 	cmpwi	cr0, r11, RPN_PATTERN
@@ -503,9 +530,9 @@ FixupDAR:/* Entry point for dcbx workaround. */
 	mtspr	SPRN_SPRG_SCRATCH2, r10
 	/* fetch instruction from memory. */
 	mfspr	r10, SPRN_SRR0
-	andis.	r11, r10, 0x8000	/* Address >= 0x80000000 */
+	IS_KERNEL(r11, r10)
 	mfspr	r11, SPRN_M_TW	/* Get level 1 table */
-	beq	3f
+	BRANCH_UNLESS_KERNEL(3f)
 	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@ha
 	/* Insert level 1 index */
 3:	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
@@ -743,15 +770,20 @@ initial_mmu:
 	ori	r8, r8, MI_EVALID	/* Mark it valid */
 	mtspr	SPRN_MI_EPN, r8
 	mtspr	SPRN_MD_EPN, r8
-	li	r8, MI_PS8MEG		/* Set 8M byte page */
+	li	r8, MI_PS8MEG | (2 << 5)	/* Set 8M byte page, APG 2 */
 	ori	r8, r8, MI_SVALID	/* Make it valid */
 	mtspr	SPRN_MI_TWC, r8
+	li	r8, MI_PS8MEG		/* Set 8M byte page, APG 0 */
+	ori	r8, r8, MI_SVALID	/* Make it valid */
 	mtspr	SPRN_MD_TWC, r8
 	li	r8, MI_BOOTINIT		/* Create RPN for address 0 */
 	mtspr	SPRN_MI_RPN, r8		/* Store TLB entry */
 	mtspr	SPRN_MD_RPN, r8
-	lis	r8, MI_Kp@h		/* Set the protection mode */
+	lis	r8, MI_APG_INIT@h	/* Set protection modes */
+	ori	r8, r8, MI_APG_INIT@l
 	mtspr	SPRN_MI_AP, r8
+	lis	r8, MD_APG_INIT@h
+	ori	r8, r8, MD_APG_INIT@l
 	mtspr	SPRN_MD_AP, r8
 
 	/* Map another 8 MByte at the IMMR to get the processor

arch/powerpc/kernel/idle_e500.S

@@ -58,15 +58,6 @@ BEGIN_FTR_SECTION
 	mtlr	r0
 	lis	r3,HID0_NAP@h
 END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
-BEGIN_FTR_SECTION
-	msync
-	li	r7,L2CSR0_L2FL@l
-	mtspr	SPRN_L2CSR0,r7
-2:
-	mfspr	r7,SPRN_L2CSR0
-	andi.	r4,r7,L2CSR0_L2FL@l
-	bne	2b
-END_FTR_SECTION_IFSET(CPU_FTR_L2CSR|CPU_FTR_CAN_NAP)
 1:
 	/* Go to NAP or DOZE now */
 	mfspr	r4,SPRN_HID0

arch/powerpc/mm/mem.c

@@ -560,7 +560,7 @@ subsys_initcall(add_system_ram_resources);
  */
 int devmem_is_allowed(unsigned long pfn)
 {
-	if (iomem_is_exclusive(pfn << PAGE_SHIFT))
+	if (iomem_is_exclusive(PFN_PHYS(pfn)))
 		return 0;
 	if (!page_is_ram(pfn))
 		return 1;

arch/powerpc/mm/tlb_low_64e.S

@@ -398,18 +398,18 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_SMT)
 	rldicl	r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3
 	clrrdi	r15,r15,3
 	cmpdi	cr0,r14,0
-	bge	tlb_miss_fault_e6500	/* Bad pgd entry or hugepage; bail */
+	bge	tlb_miss_huge_e6500	/* Bad pgd entry or hugepage; bail */
 	ldx	r14,r14,r15		/* grab pud entry */
 
 	rldicl	r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3
 	clrrdi	r15,r15,3
 	cmpdi	cr0,r14,0
-	bge	tlb_miss_fault_e6500
+	bge	tlb_miss_huge_e6500
 	ldx	r14,r14,r15		/* Grab pmd entry */
 
 	mfspr	r10,SPRN_MAS0
 	cmpdi	cr0,r14,0
-	bge	tlb_miss_fault_e6500
+	bge	tlb_miss_huge_e6500
 
 	/* Now we build the MAS for a 2M indirect page:
 	 *
@@ -428,6 +428,7 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_SMT)
 	clrrdi	r15,r16,21		/* make EA 2M-aligned */
 	mtspr	SPRN_MAS2,r15
 
+tlb_miss_huge_done_e6500:
 	lbz	r15,TCD_ESEL_NEXT(r11)
 	lbz	r16,TCD_ESEL_MAX(r11)
 	lbz	r14,TCD_ESEL_FIRST(r11)
@@ -456,6 +457,50 @@ END_FTR_SECTION_IFSET(CPU_FTR_SMT)
 	tlb_epilog_bolted
 	rfi
 
+tlb_miss_huge_e6500:
+	beq	tlb_miss_fault_e6500
+	li	r10,1
+	andi.	r15,r14,HUGEPD_SHIFT_MASK@l /* r15 = psize */
+	rldimi	r14,r10,63,0		/* Set PD_HUGE */
+	xor	r14,r14,r15		/* Clear size bits */
+	ldx	r14,0,r14
+
+	/*
+	 * Now we build the MAS for a huge page.
+	 *
+	 * MAS 0   :	ESEL needs to be filled by software round-robin
+	 *		 - can be handled by indirect code
+	 * MAS 1   :	Need to clear IND and set TSIZE
+	 * MAS 2,3+7:	Needs to be redone similar to non-tablewalk handler
+	 */
+
+	subi	r15,r15,10		/* Convert psize to tsize */
+	mfspr	r10,SPRN_MAS1
+	rlwinm	r10,r10,0,~MAS1_IND
+	rlwimi	r10,r15,MAS1_TSIZE_SHIFT,MAS1_TSIZE_MASK
+	mtspr	SPRN_MAS1,r10
+
+	li	r10,-0x400
+	sld	r15,r10,r15		/* Generate mask based on size */
+	and	r10,r16,r15
+	rldicr	r15,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT
+	rlwimi	r10,r14,32-19,27,31	/* Insert WIMGE */
+	clrldi	r15,r15,PAGE_SHIFT	/* Clear crap at the top */
+	rlwimi	r15,r14,32-8,22,25	/* Move in U bits */
+	mtspr	SPRN_MAS2,r10
+	andi.	r10,r14,_PAGE_DIRTY
+	rlwimi	r15,r14,32-2,26,31	/* Move in BAP bits */
+
+	/* Mask out SW and UW if !DIRTY (XXX optimize this !) */
+	bne	1f
+	li	r10,MAS3_SW|MAS3_UW
+	andc	r15,r15,r10
+1:
+	mtspr	SPRN_MAS7_MAS3,r15
+
+	mfspr	r10,SPRN_MAS0
+	b	tlb_miss_huge_done_e6500
+
 tlb_miss_kernel_e6500:
 	ld	r14,PACA_KERNELPGD(r13)
 	cmpldi	cr1,r15,8		/* Check for vmalloc region */

arch/powerpc/platforms/85xx/Kconfig

@@ -282,7 +282,7 @@ config CORENET_GENERIC
 	  For 64bit kernel, the following boards are supported:
 	    T208x QDS/RDB, T4240 QDS/RDB and B4 QDS
 	  The following boards are supported for both 32bit and 64bit kernel:
-	    P5020 DS, P5040 DS and T104xQDS/RDB
+	    P5020 DS, P5040 DS, T102x QDS/RDB, T104x QDS/RDB
 
 endif # FSL_SOC_BOOKE
 

arch/powerpc/platforms/85xx/corenet_generic.c

@@ -150,6 +150,9 @@ static const char * const boards[] __initconst = {
 	"fsl,B4860QDS",
 	"fsl,B4420QDS",
 	"fsl,B4220QDS",
+	"fsl,T1023RDB",
+	"fsl,T1024QDS",
+	"fsl,T1024RDB",
 	"fsl,T1040QDS",
 	"fsl,T1042QDS",
 	"fsl,T1040RDB",

arch/powerpc/platforms/85xx/smp.c

@@ -345,6 +345,7 @@ void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary)
 	local_irq_disable();
 
 	if (secondary) {
+		__flush_disable_L1();
 		atomic_inc(&kexec_down_cpus);
 		/* loop forever */
 		while (1);
@@ -357,61 +358,11 @@ static void mpc85xx_smp_kexec_down(void *arg)
 		ppc_md.kexec_cpu_down(0,1);
 }
 
-static void map_and_flush(unsigned long paddr)
-{
-	struct page *page = pfn_to_page(paddr >> PAGE_SHIFT);
-	unsigned long kaddr  = (unsigned long)kmap_atomic(page);
-
-	flush_dcache_range(kaddr, kaddr + PAGE_SIZE);
-	kunmap_atomic((void *)kaddr);
-}
-
-/**
- * Before we reset the other cores, we need to flush relevant cache
- * out to memory so we don't get anything corrupted, some of these flushes
- * are performed out of an overabundance of caution as interrupts are not
- * disabled yet and we can switch cores
- */
-static void mpc85xx_smp_flush_dcache_kexec(struct kimage *image)
-{
-	kimage_entry_t *ptr, entry;
-	unsigned long paddr;
-	int i;
-
-	if (image->type == KEXEC_TYPE_DEFAULT) {
-		/* normal kexec images are stored in temporary pages */
-		for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE);
-		     ptr = (entry & IND_INDIRECTION) ?
-				phys_to_virt(entry & PAGE_MASK) : ptr + 1) {
-			if (!(entry & IND_DESTINATION)) {
-				map_and_flush(entry);
-			}
-		}
-		/* flush out last IND_DONE page */
-		map_and_flush(entry);
-	} else {
-		/* crash type kexec images are copied to the crash region */
-		for (i = 0; i < image->nr_segments; i++) {
-			struct kexec_segment *seg = &image->segment[i];
-			for (paddr = seg->mem; paddr < seg->mem + seg->memsz;
-			     paddr += PAGE_SIZE) {
-				map_and_flush(paddr);
-			}
-		}
-	}
-
-	/* also flush the kimage struct to be passed in as well */
-	flush_dcache_range((unsigned long)image,
-			   (unsigned long)image + sizeof(*image));
-}
-
 static void mpc85xx_smp_machine_kexec(struct kimage *image)
 {
 	int timeout = INT_MAX;
 	int i, num_cpus = num_present_cpus();
 
-	mpc85xx_smp_flush_dcache_kexec(image);
-
 	if (image->type == KEXEC_TYPE_DEFAULT)
 		smp_call_function(mpc85xx_smp_kexec_down, NULL, 0);
 

arch/powerpc/platforms/85xx/twr_p102x.c

@@ -79,7 +79,7 @@ static void __init twr_p1025_setup_arch(void)
 	mpc85xx_qe_init();
 	mpc85xx_qe_par_io_init();
 
-#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE)
+#if IS_ENABLED(CONFIG_UCC_GETH) || IS_ENABLED(CONFIG_SERIAL_QE)
 	if (machine_is(twr_p1025)) {
 		struct ccsr_guts __iomem *guts;
 
@@ -101,7 +101,7 @@ static void __init twr_p1025_setup_arch(void)
 					MPC85xx_PMUXCR_QE(12));
 			iounmap(guts);
 
-#if defined(CONFIG_SERIAL_QE)
+#if IS_ENABLED(CONFIG_SERIAL_QE)
 			/* On P1025TWR board, the UCC7 acted as UART port.
 			 * However, The UCC7's CTS pin is low level in default,
 			 * it will impact the transmission in full duplex