wil6210: unmask RX_HTRSH interrupt only when connected

RX_HTRSH interrupt sometimes triggered during device reset
procedure.
To prevent handling this interrupt when not required, unmask
this interrupt only if we are connected and mask it when
disconnected.

Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/wil6210/interrupt.c

@@ -38,6 +38,8 @@
 #define WIL6210_IRQ_DISABLE	(0xFFFFFFFFUL)
 #define WIL6210_IMC_RX		(BIT_DMA_EP_RX_ICR_RX_DONE | \
 				 BIT_DMA_EP_RX_ICR_RX_HTRSH)
+#define WIL6210_IMC_RX_NO_RX_HTRSH (WIL6210_IMC_RX & \
+				    (~(BIT_DMA_EP_RX_ICR_RX_HTRSH)))
 #define WIL6210_IMC_TX		(BIT_DMA_EP_TX_ICR_TX_DONE | \
 				BIT_DMA_EP_TX_ICR_TX_DONE_N(0))
 #define WIL6210_IMC_MISC	(ISR_MISC_FW_READY | \
@@ -109,8 +111,10 @@ void wil6210_unmask_irq_tx(struct wil6210_priv *wil)
 
 void wil6210_unmask_irq_rx(struct wil6210_priv *wil)
 {
+	bool unmask_rx_htrsh = test_bit(wil_status_fwconnected, wil->status);
+
 	wil_w(wil, RGF_DMA_EP_RX_ICR + offsetof(struct RGF_ICR, IMC),
-	      WIL6210_IMC_RX);
+	      unmask_rx_htrsh ? WIL6210_IMC_RX : WIL6210_IMC_RX_NO_RX_HTRSH);
 }
 
 static void wil6210_unmask_irq_misc(struct wil6210_priv *wil)

drivers/net/wireless/ath/wil6210/main.c

@@ -194,6 +194,18 @@ __acquires(&sta->tid_rx_lock) __releases(&sta->tid_rx_lock)
 	memset(&sta->stats, 0, sizeof(sta->stats));
 }
 
+static bool wil_ap_is_connected(struct wil6210_priv *wil)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(wil->sta); i++) {
+		if (wil->sta[i].status == wil_sta_connected)
+			return true;
+	}
+
+	return false;
+}
+
 static void _wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
 				u16 reason_code, bool from_event)
 {
@@ -247,6 +259,11 @@ static void _wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
 		}
 		clear_bit(wil_status_fwconnecting, wil->status);
 		break;
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_P2P_GO:
+		if (!wil_ap_is_connected(wil))
+			clear_bit(wil_status_fwconnected, wil->status);
+		break;
 	default:
 		break;
 	}