Merge branch 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

Pull libata fixes from Tejun Heo:
 "There's one interseting commit - "libata, freezer: avoid block device
  removal while system is frozen".  It's an ugly hack working around a
  deadlock condition between driver core resume and block layer device
  removal paths through freezer which was made more reproducible by
  writeback being converted to workqueue some releases ago.  The bug has
  nothing to do with libata but it's just an workaround which is easy to
  backport.  After discussion, Rafael and I seem to agree that we don't
  really need kernel freezables - both kthread and workqueue.  There are
  few specific workqueues which constitute PM operations and require
  freezing, which will be converted to use workqueue_set_max_active()
  instead.  All other kernel freezer uses are planned to be removed,
  followed by the removal of kthread and workqueue freezer support,
  hopefully.

  Others are device-specific fixes.  The most notable is the addition of
  NO_NCQ_TRIM which is used to disable queued TRIM commands to Micro
  M500 SSDs which otherwise suffers data corruption"

* 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata, freezer: avoid block device removal while system is frozen
  libata: implement ATA_HORKAGE_NO_NCQ_TRIM and apply it to Micro M500 SSDs
  libata: disable a disk via libata.force params
  ahci: bail out on ICH6 before using AHCI BAR
  ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN
  libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8

Documentation/kernel-parameters.txt

@@ -1529,6 +1529,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 			* atapi_dmadir: Enable ATAPI DMADIR bridge support
 
+			* disable: Disable this device.
+
 			If there are multiple matching configurations changing
 			the same attribute, the last one is used.
 

drivers/ata/ahci.c

@@ -1238,15 +1238,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	/* AHCI controllers often implement SFF compatible interface.
-	 * Grab all PCI BARs just in case.
-	 */
-	rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME);
-	if (rc == -EBUSY)
-		pcim_pin_device(pdev);
-	if (rc)
-		return rc;
-
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 	    (pdev->device == 0x2652 || pdev->device == 0x2653)) {
 		u8 map;
@@ -1263,6 +1254,15 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
+	/* AHCI controllers often implement SFF compatible interface.
+	 * Grab all PCI BARs just in case.
+	 */
+	rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME);
+	if (rc == -EBUSY)
+		pcim_pin_device(pdev);
+	if (rc)
+		return rc;
+
 	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv)
 		return -ENOMEM;

drivers/ata/ahci_imx.c

@@ -113,7 +113,7 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
 	/*
 	 * set PHY Paremeters, two steps to configure the GPR13,
 	 * one write for rest of parameters, mask of first write
-	 * is 0x07fffffd, and the other one write for setting
+	 * is 0x07ffffff, and the other one write for setting
 	 * the mpll_clk_en.
 	 */
 	regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK
@@ -124,6 +124,7 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
 			| IMX6Q_GPR13_SATA_TX_ATTEN_MASK
 			| IMX6Q_GPR13_SATA_TX_BOOST_MASK
 			| IMX6Q_GPR13_SATA_TX_LVL_MASK
+			| IMX6Q_GPR13_SATA_MPLL_CLK_EN
 			| IMX6Q_GPR13_SATA_TX_EDGE_RATE
 			, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB
 			| IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M

drivers/ata/libata-core.c

@@ -2149,9 +2149,16 @@ static int ata_dev_config_ncq(struct ata_device *dev,
 				    "failed to get NCQ Send/Recv Log Emask 0x%x\n",
 				    err_mask);
 		} else {
+			u8 *cmds = dev->ncq_send_recv_cmds;
+
 			dev->flags |= ATA_DFLAG_NCQ_SEND_RECV;
-			memcpy(dev->ncq_send_recv_cmds, ap->sector_buf,
-				ATA_LOG_NCQ_SEND_RECV_SIZE);
+			memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_SEND_RECV_SIZE);
+
+			if (dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM) {
+				ata_dev_dbg(dev, "disabling queued TRIM support\n");
+				cmds[ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET] &=
+					~ATA_LOG_NCQ_SEND_RECV_DSM_TRIM;
+			}
 		}
 	}
 
@@ -4156,6 +4163,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "ST3320[68]13AS",	"SD1[5-9]",	ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
 
+	/* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */
+	{ "ST1000LM024 HN-M101MBB", "2AR10001",	ATA_HORKAGE_BROKEN_FPDMA_AA },
+
 	/* Blacklist entries taken from Silicon Image 3124/3132
 	   Windows driver .inf file - also several Linux problem reports */
 	{ "HTS541060G9SA00",    "MB3OC60D",     ATA_HORKAGE_NONCQ, },
@@ -4202,6 +4212,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "PIONEER DVD-RW  DVR-212D",	NULL,	ATA_HORKAGE_NOSETXFER },
 	{ "PIONEER DVD-RW  DVR-216D",	NULL,	ATA_HORKAGE_NOSETXFER },
 
+	/* devices that don't properly handle queued TRIM commands */
+	{ "Micron_M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
+	{ "Crucial_CT???M500SSD1",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
+
 	/* End Marker */
 	{ }
 };
@@ -6519,6 +6533,7 @@ static int __init ata_parse_force_one(char **cur,
 		{ "norst",	.lflags		= ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
 		{ "rstonce",	.lflags		= ATA_LFLAG_RST_ONCE },
 		{ "atapi_dmadir", .horkage_on	= ATA_HORKAGE_ATAPI_DMADIR },
+		{ "disable",	.horkage_on	= ATA_HORKAGE_DISABLE },
 	};
 	char *start = *cur, *p = *cur;
 	char *id, *val, *endp;

drivers/ata/libata-scsi.c

@@ -3872,6 +3872,27 @@ void ata_scsi_hotplug(struct work_struct *work)
 		return;
 	}
 
+	/*
+	 * XXX - UGLY HACK
+	 *
+	 * The block layer suspend/resume path is fundamentally broken due
+	 * to freezable kthreads and workqueue and may deadlock if a block
+	 * device gets removed while resume is in progress.  I don't know
+	 * what the solution is short of removing freezable kthreads and
+	 * workqueues altogether.
+	 *
+	 * The following is an ugly hack to avoid kicking off device
+	 * removal while freezer is active.  This is a joke but does avoid
+	 * this particular deadlock scenario.
+	 *
+	 * https://bugzilla.kernel.org/show_bug.cgi?id=62801
+	 * http://marc.info/?l=linux-kernel&m=138695698516487
+	 */
+#ifdef CONFIG_FREEZER
+	while (pm_freezing)
+		msleep(10);
+#endif
+
 	DPRINTK("ENTER\n");
 	mutex_lock(&ap->scsi_scan_mutex);
 

include/linux/libata.h

@@ -418,6 +418,7 @@ enum {
 	ATA_HORKAGE_DUMP_ID	= (1 << 16),	/* dump IDENTIFY data */
 	ATA_HORKAGE_MAX_SEC_LBA48 = (1 << 17),	/* Set max sects to 65535 */
 	ATA_HORKAGE_ATAPI_DMADIR = (1 << 18),	/* device requires dmadir */
+	ATA_HORKAGE_NO_NCQ_TRIM	= (1 << 19),	/* don't use queued TRIM */
 
 	 /* DMA mask for user DMA control: User visible values; DO NOT
 	    renumber */

kernel/freezer.c

@@ -19,6 +19,12 @@ EXPORT_SYMBOL(system_freezing_cnt);
 bool pm_freezing;
 bool pm_nosig_freezing;
 
+/*
+ * Temporary export for the deadlock workaround in ata_scsi_hotplug().
+ * Remove once the hack becomes unnecessary.
+ */
+EXPORT_SYMBOL_GPL(pm_freezing);
+
 /* protects freezing and frozen transitions */
 static DEFINE_SPINLOCK(freezer_lock);