ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain

Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.

Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock.  This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

arch/arm/boot/dts/r8a7793.dtsi

@@ -68,6 +68,7 @@
 			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7793_CLK_CMT0>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 
 		renesas,channels-mask = <0x60>;
 
@@ -87,6 +88,7 @@
 			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7793_CLK_CMT1>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 
 		renesas,channels-mask = <0xff>;
 
@@ -109,6 +111,7 @@
 			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A7793_CLK_IRQC>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	scif0: serial@e6e60000 {
@@ -117,6 +120,7 @@
 		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7793_CLK_SCIF0>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -126,6 +130,7 @@
 		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7793_CLK_SCIF1>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -134,6 +139,7 @@
 		reg = <0 0xee700000 0 0x400>;
 		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7793_CLK_ETHER>;
+		power-domains = <&cpg_clocks>;
 		phy-mode = "rmii";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -164,6 +170,7 @@
 			clock-output-names = "main", "pll0", "pll1", "pll3",
 					     "lb", "qspi", "sdh", "sd0", "z",
 					     "rcan", "adsp";
+			#power-domain-cells = <0>;
 		};
 
 		/* Variable factor clocks */