drm/i915/audio: add vlv/chv/gen5-7 audio codec disable sequence

Add support for disabling the audio codec on vlv/chv/gen5-7, similar to
hsw/bdw.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_audio.c

@@ -209,6 +209,56 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
 	I915_WRITE(HSW_AUD_CFG(pipe), tmp);
 }
 
+static void ilk_audio_codec_disable(struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+	struct intel_digital_port *intel_dig_port =
+		enc_to_dig_port(&encoder->base);
+	enum port port = intel_dig_port->port;
+	enum pipe pipe = intel_crtc->pipe;
+	uint32_t tmp, eldv;
+	int aud_config;
+	int aud_cntrl_st2;
+
+	DRM_DEBUG_KMS("Disable audio codec on port %c, pipe %c\n",
+		      port_name(port), pipe_name(pipe));
+
+	if (HAS_PCH_IBX(dev_priv->dev)) {
+		aud_config = IBX_AUD_CFG(pipe);
+		aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
+	} else if (IS_VALLEYVIEW(dev_priv)) {
+		aud_config = VLV_AUD_CFG(pipe);
+		aud_cntrl_st2 = VLV_AUD_CNTL_ST2;
+	} else {
+		aud_config = CPT_AUD_CFG(pipe);
+		aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
+	}
+
+	/* Disable timestamps */
+	tmp = I915_READ(aud_config);
+	tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
+	tmp |= AUD_CONFIG_N_PROG_ENABLE;
+	tmp &= ~AUD_CONFIG_UPPER_N_MASK;
+	tmp &= ~AUD_CONFIG_LOWER_N_MASK;
+	if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
+		tmp |= AUD_CONFIG_N_VALUE_INDEX;
+	I915_WRITE(aud_config, tmp);
+
+	if (WARN_ON(!port)) {
+		eldv = IBX_ELD_VALIDB;
+		eldv |= IBX_ELD_VALIDB << 4;
+		eldv |= IBX_ELD_VALIDB << 8;
+	} else {
+		eldv = IBX_ELD_VALIDB << ((port - 1) * 4);
+	}
+
+	/* Invalidate ELD */
+	tmp = I915_READ(aud_cntrl_st2);
+	tmp &= ~eldv;
+	I915_WRITE(aud_cntrl_st2, tmp);
+}
+
 static void ilk_audio_codec_enable(struct drm_connector *connector,
 				   struct intel_encoder *encoder,
 				   struct drm_display_mode *mode)
@@ -360,10 +410,12 @@ void intel_init_audio(struct drm_device *dev)
 		dev_priv->display.audio_codec_enable = g4x_audio_codec_enable;
 	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->display.audio_codec_enable = ilk_audio_codec_enable;
+		dev_priv->display.audio_codec_disable = ilk_audio_codec_disable;
 	} else if (IS_HASWELL(dev) || INTEL_INFO(dev)->gen >= 8) {
 		dev_priv->display.audio_codec_enable = hsw_audio_codec_enable;
 		dev_priv->display.audio_codec_disable = hsw_audio_codec_disable;
 	} else if (HAS_PCH_SPLIT(dev)) {
 		dev_priv->display.audio_codec_enable = ilk_audio_codec_enable;
+		dev_priv->display.audio_codec_disable = ilk_audio_codec_disable;
 	}
 }

drivers/gpu/drm/i915/intel_dp.c

@@ -2454,6 +2454,10 @@ static void intel_disable_dp(struct intel_encoder *encoder)
 {
 	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
 	struct drm_device *dev = encoder->base.dev;
+	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
+
+	if (crtc->config.has_audio)
+		intel_audio_codec_disable(encoder);
 
 	/* Make sure the panel is off before trying to change the mode. But also
 	 * ensure that we have vdd while we switch off the panel. */

drivers/gpu/drm/i915/intel_hdmi.c

@@ -802,9 +802,13 @@ static void intel_disable_hdmi(struct intel_encoder *encoder)
 	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
+	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
 	u32 temp;
 	u32 enable_bits = SDVO_ENABLE | SDVO_AUDIO_ENABLE;
 
+	if (crtc->config.has_audio)
+		intel_audio_codec_disable(encoder);
+
 	temp = I915_READ(intel_hdmi->hdmi_reg);
 
 	/* HW workaround for IBX, we need to move the port to transcoder A