mmc: tmio/sdhi: introduce flag for RCar 2+ specific features

RCar Gen2 and later implementations of TMIO/SDHI have their own set of
features and additions. FAST_CLK_CHG is just one of them and I see a few
others being added soon. Some may work on older chipsets but this needs
to be tested case by case. Instead of adding a bunch of flags for each
feature, add a global RCar2+ one for now. We can still break out
features if the need arises.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/sh_mobile_sdhi.c

@@ -62,7 +62,7 @@ static const struct sh_mobile_sdhi_of_data of_rcar_gen1_compatible = {
 
 static const struct sh_mobile_sdhi_of_data of_rcar_gen2_compatible = {
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE |
-			  TMIO_MMC_CLK_ACTUAL | TMIO_MMC_FAST_CLK_CHG,
+			  TMIO_MMC_CLK_ACTUAL | TMIO_MMC_MIN_RCAR2,
 	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
 	.dma_buswidth	= DMA_SLAVE_BUSWIDTH_4_BYTES,
 	.dma_rx_offset	= 0x2000,
@@ -70,7 +70,7 @@ static const struct sh_mobile_sdhi_of_data of_rcar_gen2_compatible = {
 
 static const struct sh_mobile_sdhi_of_data of_rcar_gen3_compatible = {
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE |
-			  TMIO_MMC_CLK_ACTUAL | TMIO_MMC_FAST_CLK_CHG,
+			  TMIO_MMC_CLK_ACTUAL | TMIO_MMC_MIN_RCAR2,
 	.capabilities	= MMC_CAP_SD_HIGHSPEED,
 	.bus_shift	= 2,
 };

drivers/mmc/host/tmio_mmc_pio.c

@@ -157,7 +157,7 @@ static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
 {
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
 		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
-	msleep(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG ? 1 : 10);
+	msleep(host->pdata->flags & TMIO_MMC_MIN_RCAR2 ? 1 : 10);
 
 	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
 		sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
@@ -174,7 +174,7 @@ static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
 
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
 		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
-	msleep(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG ? 5 : 10);
+	msleep(host->pdata->flags & TMIO_MMC_MIN_RCAR2 ? 5 : 10);
 }
 
 static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
@@ -205,7 +205,7 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
 			sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & CLK_CTL_DIV_MASK);
-	if (!(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG))
+	if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
 		msleep(10);
 
 	tmio_mmc_clk_start(host);

include/linux/mfd/tmio.h

@@ -66,8 +66,8 @@
  */
 #define TMIO_MMC_SDIO_IRQ		(1 << 2)
 
-/* Some controllers don't need to wait 10ms for clock changes */
-#define TMIO_MMC_FAST_CLK_CHG		(1 << 3)
+/* Some features are only available or tested on RCar Gen2 or later */
+#define TMIO_MMC_MIN_RCAR2		(1 << 3)
 
 /*
  * Some controllers require waiting for the SD bus to become