scsi: sd: Remove zone write locking

The block layer now handles zone write locking.

[mkp: removed SCMD_ZONE_WRITE_LOCK reference in scsi_debugfs]

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/scsi_debugfs.c

@@ -8,7 +8,6 @@
 static const char *const scsi_cmd_flags[] = {
 	SCSI_CMD_FLAG_NAME(TAGGED),
 	SCSI_CMD_FLAG_NAME(UNCHECKED_ISA_DMA),
-	SCSI_CMD_FLAG_NAME(ZONE_WRITE_LOCK),
 	SCSI_CMD_FLAG_NAME(INITIALIZED),
 };
 #undef SCSI_CMD_FLAG_NAME

drivers/scsi/sd.c

@@ -851,16 +851,13 @@ static int sd_setup_write_zeroes_cmnd(struct scsi_cmnd *cmd)
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	u64 sector = blk_rq_pos(rq) >> (ilog2(sdp->sector_size) - 9);
 	u32 nr_sectors = blk_rq_sectors(rq) >> (ilog2(sdp->sector_size) - 9);
-	int ret;
 
 	if (!(rq->cmd_flags & REQ_NOUNMAP)) {
 		switch (sdkp->zeroing_mode) {
 		case SD_ZERO_WS16_UNMAP:
-			ret = sd_setup_write_same16_cmnd(cmd, true);
-			goto out;
+			return sd_setup_write_same16_cmnd(cmd, true);
 		case SD_ZERO_WS10_UNMAP:
-			ret = sd_setup_write_same10_cmnd(cmd, true);
-			goto out;
+			return sd_setup_write_same10_cmnd(cmd, true);
 		}
 	}
 
@@ -868,15 +865,9 @@ static int sd_setup_write_zeroes_cmnd(struct scsi_cmnd *cmd)
 		return BLKPREP_INVALID;
 
 	if (sdkp->ws16 || sector > 0xffffffff || nr_sectors > 0xffff)
-		ret = sd_setup_write_same16_cmnd(cmd, false);
-	else
-		ret = sd_setup_write_same10_cmnd(cmd, false);
-
-out:
-	if (sd_is_zoned(sdkp) && ret == BLKPREP_OK)
-		return sd_zbc_write_lock_zone(cmd);
+		return sd_setup_write_same16_cmnd(cmd, false);
 
-	return ret;
+	return sd_setup_write_same10_cmnd(cmd, false);
 }
 
 static void sd_config_write_same(struct scsi_disk *sdkp)
@@ -964,12 +955,6 @@ static int sd_setup_write_same_cmnd(struct scsi_cmnd *cmd)
 
 	BUG_ON(bio_offset(bio) || bio_iovec(bio).bv_len != sdp->sector_size);
 
-	if (sd_is_zoned(sdkp)) {
-		ret = sd_zbc_write_lock_zone(cmd);
-		if (ret != BLKPREP_OK)
-			return ret;
-	}
-
 	sector >>= ilog2(sdp->sector_size) - 9;
 	nr_sectors >>= ilog2(sdp->sector_size) - 9;
 
@@ -1004,9 +989,6 @@ static int sd_setup_write_same_cmnd(struct scsi_cmnd *cmd)
 	ret = scsi_init_io(cmd);
 	rq->__data_len = nr_bytes;
 
-	if (sd_is_zoned(sdkp) && ret != BLKPREP_OK)
-		sd_zbc_write_unlock_zone(cmd);
-
 	return ret;
 }
 
@@ -1036,19 +1018,12 @@ static int sd_setup_read_write_cmnd(struct scsi_cmnd *SCpnt)
 	sector_t threshold;
 	unsigned int this_count = blk_rq_sectors(rq);
 	unsigned int dif, dix;
-	bool zoned_write = sd_is_zoned(sdkp) && rq_data_dir(rq) == WRITE;
 	int ret;
 	unsigned char protect;
 
-	if (zoned_write) {
-		ret = sd_zbc_write_lock_zone(SCpnt);
-		if (ret != BLKPREP_OK)
-			return ret;
-	}
-
 	ret = scsi_init_io(SCpnt);
 	if (ret != BLKPREP_OK)
-		goto out;
+		return ret;
 	WARN_ON_ONCE(SCpnt != rq->special);
 
 	/* from here on until we're complete, any goto out
@@ -1267,9 +1242,6 @@ static int sd_setup_read_write_cmnd(struct scsi_cmnd *SCpnt)
 	 */
 	ret = BLKPREP_OK;
  out:
-	if (zoned_write && ret != BLKPREP_OK)
-		sd_zbc_write_unlock_zone(SCpnt);
-
 	return ret;
 }
 
@@ -1314,9 +1286,6 @@ static void sd_uninit_command(struct scsi_cmnd *SCpnt)
 	struct request *rq = SCpnt->request;
 	u8 *cmnd;
 
-	if (SCpnt->flags & SCMD_ZONE_WRITE_LOCK)
-		sd_zbc_write_unlock_zone(SCpnt);
-
 	if (rq->rq_flags & RQF_SPECIAL_PAYLOAD)
 		__free_page(rq->special_vec.bv_page);
 

drivers/scsi/sd.h

@@ -77,7 +77,6 @@ struct scsi_disk {
 	unsigned int	nr_zones;
 	unsigned int	zone_blocks;
 	unsigned int	zone_shift;
-	unsigned long	*zones_wlock;
 	unsigned int	zones_optimal_open;
 	unsigned int	zones_optimal_nonseq;
 	unsigned int	zones_max_open;
@@ -283,8 +282,6 @@ static inline int sd_is_zoned(struct scsi_disk *sdkp)
 extern int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buffer);
 extern void sd_zbc_remove(struct scsi_disk *sdkp);
 extern void sd_zbc_print_zones(struct scsi_disk *sdkp);
-extern int sd_zbc_write_lock_zone(struct scsi_cmnd *cmd);
-extern void sd_zbc_write_unlock_zone(struct scsi_cmnd *cmd);
 extern int sd_zbc_setup_report_cmnd(struct scsi_cmnd *cmd);
 extern int sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd);
 extern void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
@@ -302,14 +299,6 @@ static inline void sd_zbc_remove(struct scsi_disk *sdkp) {}
 
 static inline void sd_zbc_print_zones(struct scsi_disk *sdkp) {}
 
-static inline int sd_zbc_write_lock_zone(struct scsi_cmnd *cmd)
-{
-	/* Let the drive fail requests */
-	return BLKPREP_OK;
-}
-
-static inline void sd_zbc_write_unlock_zone(struct scsi_cmnd *cmd) {}
-
 static inline int sd_zbc_setup_report_cmnd(struct scsi_cmnd *cmd)
 {
 	return BLKPREP_INVALID;

drivers/scsi/sd_zbc.c

@@ -229,17 +229,6 @@ static inline sector_t sd_zbc_zone_sectors(struct scsi_disk *sdkp)
 	return logical_to_sectors(sdkp->device, sdkp->zone_blocks);
 }
 
-/**
- * sd_zbc_zone_no - Get the number of the zone conataining a sector.
- * @sdkp: The target disk
- * @sector: 512B sector address contained in the zone
- */
-static inline unsigned int sd_zbc_zone_no(struct scsi_disk *sdkp,
-					  sector_t sector)
-{
-	return sectors_to_logical(sdkp->device, sector) >> sdkp->zone_shift;
-}
-
 /**
  * sd_zbc_setup_reset_cmnd - Prepare a RESET WRITE POINTER scsi command.
  * @cmd: the command to setup
@@ -278,78 +267,6 @@ int sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd)
 	return BLKPREP_OK;
 }
 
-/**
- * sd_zbc_write_lock_zone - Write lock a sequential zone.
- * @cmd: write command
- *
- * Called from sd_init_cmd() for write requests (standard write, write same or
- * write zeroes operations). If the request target zone is not already locked,
- * the zone is locked and BLKPREP_OK returned, allowing the request to proceed
- * through dispatch in scsi_request_fn(). Otherwise, BLKPREP_DEFER is returned,
- * forcing the request to wait for the zone to be unlocked, that is, for the
- * previously issued write request targeting the same zone to complete.
- *
- * This is called from blk_peek_request() context with the queue lock held and
- * before the request is removed from the scheduler. As a result, multiple
- * contexts executing concurrently scsi_request_fn() cannot result in write
- * sequence reordering as only a single write request per zone is allowed to
- * proceed.
- */
-int sd_zbc_write_lock_zone(struct scsi_cmnd *cmd)
-{
-	struct request *rq = cmd->request;
-	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
-	sector_t sector = blk_rq_pos(rq);
-	sector_t zone_sectors = sd_zbc_zone_sectors(sdkp);
-	unsigned int zno = sd_zbc_zone_no(sdkp, sector);
-
-	/*
-	 * Note: Checks of the alignment of the write command on
-	 * logical blocks is done in sd.c
-	 */
-
-	/* Do not allow zone boundaries crossing on host-managed drives */
-	if (blk_queue_zoned_model(sdkp->disk->queue) == BLK_ZONED_HM &&
-	    (sector & (zone_sectors - 1)) + blk_rq_sectors(rq) > zone_sectors)
-		return BLKPREP_KILL;
-
-	/*
-	 * Do not issue more than one write at a time per
-	 * zone. This solves write ordering problems due to
-	 * the unlocking of the request queue in the dispatch
-	 * path in the non scsi-mq case.
-	 */
-	if (sdkp->zones_wlock &&
-	    test_and_set_bit(zno, sdkp->zones_wlock))
-		return BLKPREP_DEFER;
-
-	WARN_ON_ONCE(cmd->flags & SCMD_ZONE_WRITE_LOCK);
-	cmd->flags |= SCMD_ZONE_WRITE_LOCK;
-
-	return BLKPREP_OK;
-}
-
-/**
- * sd_zbc_write_unlock_zone - Write unlock a sequential zone.
- * @cmd: write command
- *
- * Called from sd_uninit_cmd(). Unlocking the request target zone will allow
- * dispatching the next write request for the zone.
- */
-void sd_zbc_write_unlock_zone(struct scsi_cmnd *cmd)
-{
-	struct request *rq = cmd->request;
-	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
-
-	if (sdkp->zones_wlock && cmd->flags & SCMD_ZONE_WRITE_LOCK) {
-		unsigned int zno = sd_zbc_zone_no(sdkp, blk_rq_pos(rq));
-		WARN_ON_ONCE(!test_bit(zno, sdkp->zones_wlock));
-		cmd->flags &= ~SCMD_ZONE_WRITE_LOCK;
-		clear_bit_unlock(zno, sdkp->zones_wlock);
-		smp_mb__after_atomic();
-	}
-}
-
 /**
  * sd_zbc_complete - ZBC command post processing.
  * @cmd: Completed command

include/scsi/scsi_cmnd.h

@@ -58,8 +58,7 @@ struct scsi_pointer {
 /* for scmd->flags */
 #define SCMD_TAGGED		(1 << 0)
 #define SCMD_UNCHECKED_ISA_DMA	(1 << 1)
-#define SCMD_ZONE_WRITE_LOCK	(1 << 2)
-#define SCMD_INITIALIZED	(1 << 3)
+#define SCMD_INITIALIZED	(1 << 2)
 /* flags preserved across unprep / reprep */
 #define SCMD_PRESERVED_FLAGS	(SCMD_UNCHECKED_ISA_DMA | SCMD_INITIALIZED)