Просмотр исходного кода

ath9k: allow disabling bands via platform data

Some devices have multiple bands enables in the EEPROM data, even though
they are only calibrated for one. Allow platform data to disable
unsupported bands.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau 11 лет назад
Родитель
Сommit
3468968ef7

+ 16 - 8
drivers/net/wireless/ath/ath9k/hw.c

@@ -2344,17 +2344,25 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 	}
 
 	eeval = ah->eep_ops->get_eeprom(ah, EEP_OP_MODE);
-	if ((eeval & (AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A)) == 0) {
-		ath_err(common,
-			"no band has been marked as supported in EEPROM\n");
-		return -EINVAL;
+
+	if (eeval & AR5416_OPFLAGS_11A) {
+		if (ah->disable_5ghz)
+			ath_warn(common, "disabling 5GHz band\n");
+		else
+			pCap->hw_caps |= ATH9K_HW_CAP_5GHZ;
 	}
 
-	if (eeval & AR5416_OPFLAGS_11A)
-		pCap->hw_caps |= ATH9K_HW_CAP_5GHZ;
+	if (eeval & AR5416_OPFLAGS_11G) {
+		if (ah->disable_2ghz)
+			ath_warn(common, "disabling 2GHz band\n");
+		else
+			pCap->hw_caps |= ATH9K_HW_CAP_2GHZ;
+	}
 
-	if (eeval & AR5416_OPFLAGS_11G)
-		pCap->hw_caps |= ATH9K_HW_CAP_2GHZ;
+	if ((pCap->hw_caps & (ATH9K_HW_CAP_2GHZ | ATH9K_HW_CAP_5GHZ)) == 0) {
+		ath_err(common, "both bands are disabled\n");
+		return -EINVAL;
+	}
 
 	if (AR_SREV_9485(ah) ||
 	    AR_SREV_9285(ah) ||

+ 2 - 0
drivers/net/wireless/ath/ath9k/hw.h

@@ -930,6 +930,8 @@ struct ath_hw {
 	bool is_clk_25mhz;
 	int (*get_mac_revision)(void);
 	int (*external_reset)(void);
+	bool disable_2ghz;
+	bool disable_5ghz;
 
 	const struct firmware *eeprom_blob;
 

+ 2 - 0
drivers/net/wireless/ath/ath9k/init.c

@@ -531,6 +531,8 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
 		ah->is_clk_25mhz = pdata->is_clk_25mhz;
 		ah->get_mac_revision = pdata->get_mac_revision;
 		ah->external_reset = pdata->external_reset;
+		ah->disable_2ghz = pdata->disable_2ghz;
+		ah->disable_5ghz = pdata->disable_5ghz;
 		if (!pdata->endian_check)
 			ah->ah_flags |= AH_NO_EEP_SWAP;
 	}

+ 2 - 0
include/linux/ath9k_platform.h

@@ -34,6 +34,8 @@ struct ath9k_platform_data {
 	bool endian_check;
 	bool is_clk_25mhz;
 	bool tx_gain_buffalo;
+	bool disable_2ghz;
+	bool disable_5ghz;
 
 	int (*get_mac_revision)(void);
 	int (*external_reset)(void);