Merge branch 'stmmac-eee'

Giuseppe Cavallaro says:

====================
stmmac EEE fixes

This is a subset of patches to provide some fixes for the EEE support inside the
driver.
Patches have been tested on boards EEE capable plugged on switch w/ w/o EEE
support.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/common.h

@@ -220,10 +220,10 @@ enum dma_irq_status {
 	handle_tx = 0x8,
 };
 
-#define	CORE_IRQ_TX_PATH_IN_LPI_MODE	(1 << 1)
-#define	CORE_IRQ_TX_PATH_EXIT_LPI_MODE	(1 << 2)
-#define	CORE_IRQ_RX_PATH_IN_LPI_MODE	(1 << 3)
-#define	CORE_IRQ_RX_PATH_EXIT_LPI_MODE	(1 << 4)
+#define	CORE_IRQ_TX_PATH_IN_LPI_MODE	(1 << 0)
+#define	CORE_IRQ_TX_PATH_EXIT_LPI_MODE	(1 << 1)
+#define	CORE_IRQ_RX_PATH_IN_LPI_MODE	(1 << 2)
+#define	CORE_IRQ_RX_PATH_EXIT_LPI_MODE	(1 << 3)
 
 #define	CORE_PCS_ANE_COMPLETE		(1 << 5)
 #define	CORE_PCS_LINK_STATUS		(1 << 6)
@@ -287,7 +287,7 @@ struct dma_features {
 
 /* Default LPI timers */
 #define STMMAC_DEFAULT_LIT_LS	0x3E8
-#define STMMAC_DEFAULT_TWT_LS	0x0
+#define STMMAC_DEFAULT_TWT_LS	0x1E
 
 #define STMMAC_CHAIN_MODE	0x1
 #define STMMAC_RING_MODE	0x2

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -275,6 +275,7 @@ static void stmmac_eee_ctrl_timer(unsigned long arg)
  */
 bool stmmac_eee_init(struct stmmac_priv *priv)
 {
+	char *phy_bus_name = priv->plat->phy_bus_name;
 	bool ret = false;
 
 	/* Using PCS we cannot dial with the phy registers at this stage
@@ -284,6 +285,10 @@ bool stmmac_eee_init(struct stmmac_priv *priv)
 	    (priv->pcs == STMMAC_PCS_RTBI))
 		goto out;
 
+	/* Never init EEE in case of a switch is attached */
+	if (phy_bus_name && (!strcmp(phy_bus_name, "fixed")))
+		goto out;
+
 	/* MAC core supports the EEE feature. */
 	if (priv->dma_cap.eee) {
 		int tx_lpi_timer = priv->tx_lpi_timer;
@@ -316,10 +321,9 @@ bool stmmac_eee_init(struct stmmac_priv *priv)
 			priv->hw->mac->set_eee_timer(priv->hw,
 						     STMMAC_DEFAULT_LIT_LS,
 						     tx_lpi_timer);
-		} else
-			/* Set HW EEE according to the speed */
-			priv->hw->mac->set_eee_pls(priv->hw,
-						   priv->phydev->link);
+		}
+		/* Set HW EEE according to the speed */
+		priv->hw->mac->set_eee_pls(priv->hw, priv->phydev->link);
 
 		pr_debug("stmmac: Energy-Efficient Ethernet initialized\n");