Merge tag 'hwmon-for-linus-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - Add PMBus client driver for IR35221

 - Add support for NCT6795D to nct6775 driver

 - Functional improvements to adt7475, aspeed-pwm-tacho, and ibmpowernv
   drivers

 - Minor fixes and cleanups in various drivers

* tag 'hwmon-for-linus-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (22 commits)
  hwmon: (aspeed-pwm-tacho) Poll with short sleeps.
  hwmon: (aspeed-pwm-tacho) reduce fan_tach period
  hwmon: (ibmpowernv) Add current(A) sensor
  hwmon: (ibmpowernv) introduce a legacy_compatibles array
  hwmon: (pwm-fan) Switch to new atomic PWM API
  hwmon: (scpi) Fix the scale of SCP sensor readings
  hwmon: (aspeed-pwm-tacho) Enable both edge measurement.
  hwmon: (ibmpowernv) Add highest/lowest attributes to sensors
  hwmon: (pmbus) move header file out of I2C realm
  hwmon: (max6639) move header file out of I2C realm
  hwmon: (ltc4245) move header file out of I2C realm
  hwmon: (ds620) move header file out of I2C realm
  hwmon: (ads1015) move header file out of I2C realm
  hwmon: (adt7475) temperature smoothing
  hwmon: (adt7475) add high frequency support
  hwmon: (adt7475) fan stall prevention
  hwmon: (adt7475) replace find_nearest() with find_closest()
  hwmon: (pmbus) Add client driver for IR35221
  hwmon: (nct6775) Add support for NCT6795D
  hwmon: (nct6775) Improve fan detection
  ...

Documentation/hwmon/ads1015

@@ -40,7 +40,7 @@ By default all inputs are exported.
 Platform Data
 -------------
 
-In linux/i2c/ads1015.h platform data is defined, channel_data contains
+In linux/platform_data/ads1015.h platform data is defined, channel_data contains
 configuration data for the used input combinations:
 - pga is the programmable gain amplifier (values are full scale)
   0: +/- 6.144 V

Documentation/hwmon/adt7475

@@ -109,6 +109,15 @@ fan speed) is applied. PWM values range from 0 (off) to 255 (full speed).
 Fan speed may be set to maximum when the temperature sensor associated with
 the PWM control exceeds temp#_max.
 
+At Tmin - hysteresis the PWM output can either be off (0% duty cycle) or at the
+minimum (i.e. auto_point1_pwm). This behaviour can be configured using the
+pwm[1-*]_stall_disable sysfs attribute. A value of 0 means the fans will shut
+off. A value of 1 means the fans will run at auto_point1_pwm.
+
+The responsiveness of the ADT747x to temperature changes can be configured.
+This allows smoothing of the fan speed transition. To set the transition time
+set the value in ms in the temp[1-*]_smoothing sysfs attribute.
+
 Notes
 -----
 

Documentation/hwmon/ir35221

@@ -0,0 +1,87 @@
+Kernel driver ir35221
+=====================
+
+Supported chips:
+  * Infinion IR35221
+    Prefix: 'ir35221'
+    Addresses scanned: -
+    Datasheet: Datasheet is not publicly available.
+
+Author: Samuel Mendoza-Jonas <sam@mendozajonas.com>
+
+
+Description
+-----------
+
+IR35221 is a Digital DC-DC Multiphase Converter
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Example: the following commands will load the driver for an IR35221
+at address 0x70 on I2C bus #4:
+
+# modprobe ir35221
+# echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
+
+
+Sysfs attributes
+----------------
+
+curr1_label		"iin"
+curr1_input		Measured input current
+curr1_max		Maximum current
+curr1_max_alarm		Current high alarm
+
+curr[2-3]_label		"iout[1-2]"
+curr[2-3]_input		Measured output current
+curr[2-3]_crit		Critical maximum current
+curr[2-3]_crit_alarm	Current critical high alarm
+curr[2-3]_highest	Highest output current
+curr[2-3]_lowest	Lowest output current
+curr[2-3]_max		Maximum current
+curr[2-3]_max_alarm	Current high alarm
+
+in1_label		"vin"
+in1_input		Measured input voltage
+in1_crit		Critical maximum input voltage
+in1_crit_alarm		Input voltage critical high alarm
+in1_highest		Highest input voltage
+in1_lowest		Lowest input voltage
+in1_min			Minimum input voltage
+in1_min_alarm		Input voltage low alarm
+
+in[2-3]_label		"vout[1-2]"
+in[2-3]_input		Measured output voltage
+in[2-3]_lcrit		Critical minimum output voltage
+in[2-3]_lcrit_alarm	Output voltage critical low alarm
+in[2-3]_crit		Critical maximum output voltage
+in[2-3]_crit_alarm	Output voltage critical high alarm
+in[2-3]_highest		Highest output voltage
+in[2-3]_lowest		Lowest output voltage
+in[2-3]_max		Maximum output voltage
+in[2-3]_max_alarm	Output voltage high alarm
+in[2-3]_min		Minimum output voltage
+in[2-3]_min_alarm	Output voltage low alarm
+
+power1_label		"pin"
+power1_input		Measured input power
+power1_alarm		Input power high alarm
+power1_max		Input power limit
+
+power[2-3]_label	"pout[1-2]"
+power[2-3]_input	Measured output power
+power[2-3]_max		Output power limit
+power[2-3]_max_alarm	Output power high alarm
+
+temp[1-2]_input		Measured temperature
+temp[1-2]_crit		Critical high temperature
+temp[1-2]_crit_alarm	Chip temperature critical high alarm
+temp[1-2]_highest	Highest temperature
+temp[1-2]_lowest	Lowest temperature
+temp[1-2]_max		Maximum temperature
+temp[1-2]_max_alarm	Chip temperature high alarm

Documentation/hwmon/ltc4245

@@ -96,7 +96,7 @@ slowly, -EAGAIN will be returned when you read the sysfs attribute containing
 the sensor reading.
 
 The LTC4245 chip can be configured to sample all GPIO pins with two methods:
-1) platform data -- see include/linux/i2c/ltc4245.h
+1) platform data -- see include/linux/platform_data/ltc4245.h
 2) OF device tree -- add the "ltc4245,use-extra-gpios" property to each chip
 
 The default mode of operation is to sample a single GPIO pin.

Documentation/hwmon/pmbus-core

@@ -253,7 +253,7 @@ Specifically, it provides the following information.
 PMBus driver platform data
 ==========================
 
-PMBus platform data is defined in include/linux/i2c/pmbus.h. Platform data
+PMBus platform data is defined in include/linux/pmbus.h. Platform data
 currently only provides a flag field with a single bit used.
 
 #define PMBUS_SKIP_STATUS_CHECK (1 << 0)

MAINTAINERS

@@ -478,7 +478,7 @@ L:	linux-hwmon@vger.kernel.org
 S:	Maintained
 F:	Documentation/hwmon/ads1015
 F:	drivers/hwmon/ads1015.c
-F:	include/linux/i2c/ads1015.h
+F:	include/linux/platform_data/ads1015.h
 
 ADT746X FAN DRIVER
 M:	Colin Leroy <colin@colino.net>
@@ -10179,7 +10179,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
 S:	Maintained
 F:	Documentation/hwmon/pmbus
 F:	drivers/hwmon/pmbus/
-F:	include/linux/i2c/pmbus.h
+F:	include/linux/pmbus.h
 
 PMC SIERRA MaxRAID DRIVER
 L:	linux-scsi@vger.kernel.org

drivers/hwmon/ads1015.c

@@ -34,7 +34,7 @@
 #include <linux/of_device.h>
 #include <linux/of.h>
 
-#include <linux/i2c/ads1015.h>
+#include <linux/platform_data/ads1015.h>
 
 /* ADS1015 registers */
 enum {

drivers/hwmon/adt7475.c

@@ -22,6 +22,7 @@
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <linux/jiffies.h>
+#include <linux/util_macros.h>
 
 /* Indexes for the sysfs hooks */
 
@@ -78,6 +79,9 @@
 
 #define REG_TEMP_TRANGE_BASE	0x5F
 
+#define REG_ENHANCE_ACOUSTICS1	0x62
+#define REG_ENHANCE_ACOUSTICS2	0x63
+
 #define REG_PWM_MIN_BASE	0x64
 
 #define REG_TEMP_TMIN_BASE	0x67
@@ -208,6 +212,7 @@ struct adt7475_data {
 	u8 range[3];
 	u8 pwmctl[3];
 	u8 pwmchan[3];
+	u8 enh_acoustics[2];
 
 	u8 vid;
 	u8 vrm;
@@ -314,35 +319,6 @@ static void adt7475_write_word(struct i2c_client *client, int reg, u16 val)
 	i2c_smbus_write_byte_data(client, reg, val & 0xFF);
 }
 
-/*
- * Find the nearest value in a table - used for pwm frequency and
- * auto temp range
- */
-static int find_nearest(long val, const int *array, int size)
-{
-	int i;
-
-	if (val < array[0])
-		return 0;
-
-	if (val > array[size - 1])
-		return size - 1;
-
-	for (i = 0; i < size - 1; i++) {
-		int a, b;
-
-		if (val > array[i + 1])
-			continue;
-
-		a = val - array[i];
-		b = array[i + 1] - val;
-
-		return (a <= b) ? i : i + 1;
-	}
-
-	return 0;
-}
-
 static ssize_t show_voltage(struct device *dev, struct device_attribute *attr,
 			    char *buf)
 {
@@ -550,6 +526,88 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
+/* Assuming CONFIG6[SLOW] is 0 */
+static const int ad7475_st_map[] = {
+	37500, 18800, 12500, 7500, 4700, 3100, 1600, 800,
+};
+
+static ssize_t show_temp_st(struct device *dev, struct device_attribute *attr,
+				  char *buf)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	long val;
+
+	switch (sattr->index) {
+	case 0:
+		val = data->enh_acoustics[0] & 0xf;
+		break;
+	case 1:
+		val = (data->enh_acoustics[1] >> 4) & 0xf;
+		break;
+	case 2:
+	default:
+		val = data->enh_acoustics[1] & 0xf;
+		break;
+	}
+
+	if (val & 0x8)
+		return sprintf(buf, "%d\n", ad7475_st_map[val & 0x7]);
+	else
+		return sprintf(buf, "0\n");
+}
+
+static ssize_t set_temp_st(struct device *dev, struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	unsigned char reg;
+	int shift, idx;
+	ulong val;
+
+	if (kstrtoul(buf, 10, &val))
+		return -EINVAL;
+
+	switch (sattr->index) {
+	case 0:
+		reg = REG_ENHANCE_ACOUSTICS1;
+		shift = 0;
+		idx = 0;
+		break;
+	case 1:
+		reg = REG_ENHANCE_ACOUSTICS2;
+		shift = 0;
+		idx = 1;
+		break;
+	case 2:
+	default:
+		reg = REG_ENHANCE_ACOUSTICS2;
+		shift = 4;
+		idx = 1;
+		break;
+	}
+
+	if (val > 0) {
+		val = find_closest_descending(val, ad7475_st_map,
+					      ARRAY_SIZE(ad7475_st_map));
+		val |= 0x8;
+	}
+
+	mutex_lock(&data->lock);
+
+	data->enh_acoustics[idx] &= ~(0xf << shift);
+	data->enh_acoustics[idx] |= (val << shift);
+
+	i2c_smbus_write_byte_data(client, reg, data->enh_acoustics[idx]);
+
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
 /*
  * Table of autorange values - the user will write the value in millidegrees,
  * and we'll convert it
@@ -606,7 +664,7 @@ static ssize_t set_point2(struct device *dev, struct device_attribute *attr,
 	val -= temp;
 
 	/* Find the nearest table entry to what the user wrote */
-	val = find_nearest(val, autorange_table, ARRAY_SIZE(autorange_table));
+	val = find_closest(val, autorange_table, ARRAY_SIZE(autorange_table));
 
 	data->range[sattr->index] &= ~0xF0;
 	data->range[sattr->index] |= val << 4;
@@ -728,6 +786,43 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
 	data->pwm[sattr->nr][sattr->index] = clamp_val(val, 0, 0xFF);
 	i2c_smbus_write_byte_data(client, reg,
 				  data->pwm[sattr->nr][sattr->index]);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_stall_disable(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	u8 mask = BIT(5 + sattr->index);
+
+	return sprintf(buf, "%d\n", !!(data->enh_acoustics[0] & mask));
+}
+
+static ssize_t set_stall_disable(struct device *dev,
+				 struct device_attribute *attr, const char *buf,
+				 size_t count)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	long val;
+	u8 mask = BIT(5 + sattr->index);
+
+	if (kstrtol(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	data->enh_acoustics[0] &= ~mask;
+	if (val)
+		data->enh_acoustics[0] |= mask;
+
+	i2c_smbus_write_byte_data(client, REG_ENHANCE_ACOUSTICS1,
+				  data->enh_acoustics[0]);
 
 	mutex_unlock(&data->lock);
 
@@ -839,7 +934,7 @@ static ssize_t set_pwmctrl(struct device *dev, struct device_attribute *attr,
 
 /* List of frequencies for the PWM */
 static const int pwmfreq_table[] = {
-	11, 14, 22, 29, 35, 44, 58, 88
+	11, 14, 22, 29, 35, 44, 58, 88, 22500
 };
 
 static ssize_t show_pwmfreq(struct device *dev, struct device_attribute *attr,
@@ -847,9 +942,10 @@ static ssize_t show_pwmfreq(struct device *dev, struct device_attribute *attr,
 {
 	struct adt7475_data *data = adt7475_update_device(dev);
 	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	int i = clamp_val(data->range[sattr->index] & 0xf, 0,
+			  ARRAY_SIZE(pwmfreq_table) - 1);
 
-	return sprintf(buf, "%d\n",
-		       pwmfreq_table[data->range[sattr->index] & 7]);
+	return sprintf(buf, "%d\n", pwmfreq_table[i]);
 }
 
 static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr,
@@ -864,13 +960,13 @@ static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr,
 	if (kstrtol(buf, 10, &val))
 		return -EINVAL;
 
-	out = find_nearest(val, pwmfreq_table, ARRAY_SIZE(pwmfreq_table));
+	out = find_closest(val, pwmfreq_table, ARRAY_SIZE(pwmfreq_table));
 
 	mutex_lock(&data->lock);
 
 	data->range[sattr->index] =
 		adt7475_read(TEMP_TRANGE_REG(sattr->index));
-	data->range[sattr->index] &= ~7;
+	data->range[sattr->index] &= ~0xf;
 	data->range[sattr->index] |= out;
 
 	i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index),
@@ -995,6 +1091,8 @@ static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    THERM, 0);
 static SENSOR_DEVICE_ATTR_2(temp1_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
 			    set_temp, HYSTERSIS, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
+			    set_temp_st, 0, 0);
 static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, INPUT, 1);
 static SENSOR_DEVICE_ATTR_2(temp2_alarm, S_IRUGO, show_temp, NULL, ALARM, 1);
 static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
@@ -1011,6 +1109,8 @@ static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    THERM, 1);
 static SENSOR_DEVICE_ATTR_2(temp2_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
 			    set_temp, HYSTERSIS, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
+			    set_temp_st, 0, 1);
 static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, INPUT, 2);
 static SENSOR_DEVICE_ATTR_2(temp3_alarm, S_IRUGO, show_temp, NULL, ALARM, 2);
 static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_temp, NULL, FAULT, 2);
@@ -1028,6 +1128,8 @@ static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    THERM, 2);
 static SENSOR_DEVICE_ATTR_2(temp3_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
 			    set_temp, HYSTERSIS, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
+			    set_temp_st, 0, 2);
 static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_tach, NULL, INPUT, 0);
 static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
 			    MIN, 0);
@@ -1056,6 +1158,8 @@ static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
 			    set_pwm, MIN, 0);
 static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
 			    set_pwm, MAX, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_stall_disable, S_IRUGO | S_IWUSR,
+			    show_stall_disable, set_stall_disable, 0, 0);
 static SENSOR_DEVICE_ATTR_2(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
 			    1);
 static SENSOR_DEVICE_ATTR_2(pwm2_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
@@ -1068,6 +1172,8 @@ static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
 			    set_pwm, MIN, 1);
 static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
 			    set_pwm, MAX, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_stall_disable, S_IRUGO | S_IWUSR,
+			    show_stall_disable, set_stall_disable, 0, 1);
 static SENSOR_DEVICE_ATTR_2(pwm3, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
 			    2);
 static SENSOR_DEVICE_ATTR_2(pwm3_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
@@ -1080,6 +1186,8 @@ static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
 			    set_pwm, MIN, 2);
 static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
 			    set_pwm, MAX, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_stall_disable, S_IRUGO | S_IWUSR,
+			    show_stall_disable, set_stall_disable, 0, 2);
 
 /* Non-standard name, might need revisiting */
 static DEVICE_ATTR_RW(pwm_use_point2_pwm_at_crit);
@@ -1106,6 +1214,7 @@ static struct attribute *adt7475_attrs[] = {
 	&sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
 	&sensor_dev_attr_temp1_crit.dev_attr.attr,
 	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp1_smoothing.dev_attr.attr,
 	&sensor_dev_attr_temp2_input.dev_attr.attr,
 	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp2_max.dev_attr.attr,
@@ -1115,6 +1224,7 @@ static struct attribute *adt7475_attrs[] = {
 	&sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
 	&sensor_dev_attr_temp2_crit.dev_attr.attr,
 	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp2_smoothing.dev_attr.attr,
 	&sensor_dev_attr_temp3_input.dev_attr.attr,
 	&sensor_dev_attr_temp3_fault.dev_attr.attr,
 	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
@@ -1125,6 +1235,7 @@ static struct attribute *adt7475_attrs[] = {
 	&sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
 	&sensor_dev_attr_temp3_crit.dev_attr.attr,
 	&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp3_smoothing.dev_attr.attr,
 	&sensor_dev_attr_fan1_input.dev_attr.attr,
 	&sensor_dev_attr_fan1_min.dev_attr.attr,
 	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
@@ -1140,12 +1251,14 @@ static struct attribute *adt7475_attrs[] = {
 	&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_stall_disable.dev_attr.attr,
 	&sensor_dev_attr_pwm3.dev_attr.attr,
 	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
 	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
 	&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
 	&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_stall_disable.dev_attr.attr,
 	&dev_attr_pwm_use_point2_pwm_at_crit.attr,
 	NULL,
 };
@@ -1164,6 +1277,7 @@ static struct attribute *pwm2_attrs[] = {
 	&sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
 	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_stall_disable.dev_attr.attr,
 	NULL
 };
 

drivers/hwmon/aspeed-pwm-tacho.c

@@ -146,14 +146,26 @@
 
 #define PWM_MAX 255
 
+#define BOTH_EDGES 0x02 /* 10b */
+
 #define M_PWM_DIV_H 0x00
 #define M_PWM_DIV_L 0x05
 #define M_PWM_PERIOD 0x5F
 #define M_TACH_CLK_DIV 0x00
-#define M_TACH_MODE 0x00
-#define M_TACH_UNIT 0x1000
+/*
+ * 5:4 Type N fan tach mode selection bit:
+ * 00: falling
+ * 01: rising
+ * 10: both
+ * 11: reserved.
+ */
+#define M_TACH_MODE 0x02 /* 10b */
+#define M_TACH_UNIT 0x00c0
 #define INIT_FAN_CTRL 0xFF
 
+/* How long we sleep in us while waiting for an RPM result. */
+#define ASPEED_RPM_STATUS_SLEEP_USEC	500
+
 struct aspeed_pwm_tacho_data {
 	struct regmap *regmap;
 	unsigned long clk_freq;
@@ -163,6 +175,7 @@ struct aspeed_pwm_tacho_data {
 	u8 type_pwm_clock_division_h[3];
 	u8 type_pwm_clock_division_l[3];
 	u8 type_fan_tach_clock_division[3];
+	u8 type_fan_tach_mode[3];
 	u16 type_fan_tach_unit[3];
 	u8 pwm_port_type[8];
 	u8 pwm_port_fan_ctrl[8];
@@ -498,8 +511,9 @@ static u32 aspeed_get_fan_tach_ch_measure_period(struct aspeed_pwm_tacho_data
 static int aspeed_get_fan_tach_ch_rpm(struct aspeed_pwm_tacho_data *priv,
 				      u8 fan_tach_ch)
 {
-	u32 raw_data, tach_div, clk_source, sec, val;
-	u8 fan_tach_ch_source, type;
+	u32 raw_data, tach_div, clk_source, msec, usec, val;
+	u8 fan_tach_ch_source, type, mode, both;
+	int ret;
 
 	regmap_write(priv->regmap, ASPEED_PTCR_TRIGGER, 0);
 	regmap_write(priv->regmap, ASPEED_PTCR_TRIGGER, 0x1 << fan_tach_ch);
@@ -507,16 +521,31 @@ static int aspeed_get_fan_tach_ch_rpm(struct aspeed_pwm_tacho_data *priv,
 	fan_tach_ch_source = priv->fan_tach_ch_source[fan_tach_ch];
 	type = priv->pwm_port_type[fan_tach_ch_source];
 
-	sec = (1000 / aspeed_get_fan_tach_ch_measure_period(priv, type));
-	msleep(sec);
+	msec = (1000 / aspeed_get_fan_tach_ch_measure_period(priv, type));
+	usec = msec * 1000;
+
+	ret = regmap_read_poll_timeout(
+		priv->regmap,
+		ASPEED_PTCR_RESULT,
+		val,
+		(val & RESULT_STATUS_MASK),
+		ASPEED_RPM_STATUS_SLEEP_USEC,
+		usec);
 
-	regmap_read(priv->regmap, ASPEED_PTCR_RESULT, &val);
-	if (!(val & RESULT_STATUS_MASK))
-		return -ETIMEDOUT;
+	/* return -ETIMEDOUT if we didn't get an answer. */
+	if (ret)
+		return ret;
 
 	raw_data = val & RESULT_VALUE_MASK;
 	tach_div = priv->type_fan_tach_clock_division[type];
-	tach_div = 0x4 << (tach_div * 2);
+	/*
+	 * We need the mode to determine if the raw_data is double (from
+	 * counting both edges).
+	 */
+	mode = priv->type_fan_tach_mode[type];
+	both = (mode & BOTH_EDGES) ? 1 : 0;
+
+	tach_div = (0x4 << both) << (tach_div * 2);
 	clk_source = priv->clk_freq;
 
 	if (raw_data == 0)
@@ -702,6 +731,7 @@ static void aspeed_create_type(struct aspeed_pwm_tacho_data *priv)
 	aspeed_set_tacho_type_enable(priv->regmap, TYPEM, true);
 	priv->type_fan_tach_clock_division[TYPEM] = M_TACH_CLK_DIV;
 	priv->type_fan_tach_unit[TYPEM] = M_TACH_UNIT;
+	priv->type_fan_tach_mode[TYPEM] = M_TACH_MODE;
 	aspeed_set_tacho_type_values(priv->regmap, TYPEM, M_TACH_MODE,
 				     M_TACH_UNIT, M_TACH_CLK_DIV);
 }

drivers/hwmon/ds620.c

@@ -30,7 +30,7 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/sysfs.h>
-#include <linux/i2c/ds620.h>
+#include <linux/platform_data/ds620.h>
 
 /*
  * Many DS620 constants specified below

drivers/hwmon/ibmpowernv.c

@@ -50,22 +50,34 @@ enum sensors {
 	TEMP,
 	POWER_SUPPLY,
 	POWER_INPUT,
+	CURRENT,
 	MAX_SENSOR_TYPE,
 };
 
 #define INVALID_INDEX (-1U)
 
+/*
+ * 'compatible' string properties for sensor types as defined in old
+ * PowerNV firmware (skiboot). These are ordered as 'enum sensors'.
+ */
+static const char * const legacy_compatibles[] = {
+	"ibm,opal-sensor-cooling-fan",
+	"ibm,opal-sensor-amb-temp",
+	"ibm,opal-sensor-power-supply",
+	"ibm,opal-sensor-power"
+};
+
 static struct sensor_group {
-	const char *name;
-	const char *compatible;
+	const char *name; /* matches property 'sensor-type' */
 	struct attribute_group group;
 	u32 attr_count;
 	u32 hwmon_index;
 } sensor_groups[] = {
-	{"fan", "ibm,opal-sensor-cooling-fan"},
-	{"temp", "ibm,opal-sensor-amb-temp"},
-	{"in", "ibm,opal-sensor-power-supply"},
-	{"power", "ibm,opal-sensor-power"}
+	{ "fan"   },
+	{ "temp"  },
+	{ "in"    },
+	{ "power" },
+	{ "curr"  },
 };
 
 struct sensor_data {
@@ -239,8 +251,8 @@ static int get_sensor_type(struct device_node *np)
 	enum sensors type;
 	const char *str;
 
-	for (type = 0; type < MAX_SENSOR_TYPE; type++) {
-		if (of_device_is_compatible(np, sensor_groups[type].compatible))
+	for (type = 0; type < ARRAY_SIZE(legacy_compatibles); type++) {
+		if (of_device_is_compatible(np, legacy_compatibles[type]))
 			return type;
 	}
 
@@ -298,10 +310,14 @@ static int populate_attr_groups(struct platform_device *pdev)
 		sensor_groups[type].attr_count++;
 
 		/*
-		 * add a new attribute for labels
+		 * add attributes for labels, min and max
 		 */
 		if (!of_property_read_string(np, "label", &label))
 			sensor_groups[type].attr_count++;
+		if (of_find_property(np, "sensor-data-min", NULL))
+			sensor_groups[type].attr_count++;
+		if (of_find_property(np, "sensor-data-max", NULL))
+			sensor_groups[type].attr_count++;
 	}
 
 	of_node_put(opal);
@@ -337,6 +353,41 @@ static void create_hwmon_attr(struct sensor_data *sdata, const char *attr_name,
 	sdata->dev_attr.show = show;
 }
 
+static void populate_sensor(struct sensor_data *sdata, int od, int hd, int sid,
+			    const char *attr_name, enum sensors type,
+			    const struct attribute_group *pgroup,
+			    ssize_t (*show)(struct device *dev,
+					    struct device_attribute *attr,
+					    char *buf))
+{
+	sdata->id = sid;
+	sdata->type = type;
+	sdata->opal_index = od;
+	sdata->hwmon_index = hd;
+	create_hwmon_attr(sdata, attr_name, show);
+	pgroup->attrs[sensor_groups[type].attr_count++] = &sdata->dev_attr.attr;
+}
+
+static char *get_max_attr(enum sensors type)
+{
+	switch (type) {
+	case POWER_INPUT:
+		return "input_highest";
+	default:
+		return "highest";
+	}
+}
+
+static char *get_min_attr(enum sensors type)
+{
+	switch (type) {
+	case POWER_INPUT:
+		return "input_lowest";
+	default:
+		return "lowest";
+	}
+}
+
 /*
  * Iterate through the device tree for each child of 'sensors' node, create
  * a sysfs attribute file, the file is named by translating the DT node name
@@ -417,16 +468,31 @@ static int create_device_attrs(struct platform_device *pdev)
 			 * attribute. They are related to the same
 			 * sensor.
 			 */
-			sdata[count].type = type;
-			sdata[count].opal_index = sdata[count - 1].opal_index;
-			sdata[count].hwmon_index = sdata[count - 1].hwmon_index;
 
 			make_sensor_label(np, &sdata[count], label);
+			populate_sensor(&sdata[count], opal_index,
+					sdata[count - 1].hwmon_index,
+					sensor_id, "label", type, pgroups[type],
+					show_label);
+			count++;
+		}
 
-			create_hwmon_attr(&sdata[count], "label", show_label);
+		if (!of_property_read_u32(np, "sensor-data-max", &sensor_id)) {
+			attr_name = get_max_attr(type);
+			populate_sensor(&sdata[count], opal_index,
+					sdata[count - 1].hwmon_index,
+					sensor_id, attr_name, type,
+					pgroups[type], show_sensor);
+			count++;
+		}
 
-			pgroups[type]->attrs[sensor_groups[type].attr_count++] =
-				&sdata[count++].dev_attr.attr;
+		if (!of_property_read_u32(np, "sensor-data-min", &sensor_id)) {
+			attr_name = get_min_attr(type);
+			populate_sensor(&sdata[count], opal_index,
+					sdata[count - 1].hwmon_index,
+					sensor_id, attr_name, type,
+					pgroups[type], show_sensor);
+			count++;
 		}
 	}
 

drivers/hwmon/ltc4245.c

@@ -23,7 +23,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/jiffies.h>
-#include <linux/i2c/ltc4245.h>
+#include <linux/platform_data/ltc4245.h>
 
 /* Here are names of the chip's registers (a.k.a. commands) */
 enum ltc4245_cmd {

drivers/hwmon/max6639.c

@@ -32,7 +32,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
-#include <linux/i2c/max6639.h>
+#include <linux/platform_data/max6639.h>
 
 /* Addresses to scan */
 static const unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END };

drivers/hwmon/nct6775.c

@@ -40,6 +40,8 @@
  * nct6791d    15      6       6       2+6    0xc800 0xc1    0x5ca3
  * nct6792d    15      6       6       2+6    0xc910 0xc1    0x5ca3
  * nct6793d    15      6       6       2+6    0xd120 0xc1    0x5ca3
+ * nct6795d    14      6       6       2+6    0xd350 0xc1    0x5ca3
+ *
  *
  * #temp lists the number of monitored temperature sources (first value) plus
  * the number of directly connectable temperature sensors (second value).
@@ -58,13 +60,15 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/acpi.h>
+#include <linux/bitops.h>
 #include <linux/dmi.h>
 #include <linux/io.h>
 #include "lm75.h"
 
 #define USE_ALTERNATE
 
-enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793 };
+enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793,
+	     nct6795 };
 
 /* used to set data->name = nct6775_device_names[data->sio_kind] */
 static const char * const nct6775_device_names[] = {
@@ -75,6 +79,7 @@ static const char * const nct6775_device_names[] = {
 	"nct6791",
 	"nct6792",
 	"nct6793",
+	"nct6795",
 };
 
 static const char * const nct6775_sio_names[] __initconst = {
@@ -85,6 +90,7 @@ static const char * const nct6775_sio_names[] __initconst = {
 	"NCT6791D",
 	"NCT6792D",
 	"NCT6793D",
+	"NCT6795D",
 };
 
 static unsigned short force_id;
@@ -104,6 +110,7 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
 #define NCT6775_LD_ACPI		0x0a
 #define NCT6775_LD_HWM		0x0b
 #define NCT6775_LD_VID		0x0d
+#define NCT6775_LD_12		0x12
 
 #define SIO_REG_LDSEL		0x07	/* Logical device select */
 #define SIO_REG_DEVID		0x20	/* Device ID (2 bytes) */
@@ -117,6 +124,7 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
 #define SIO_NCT6791_ID		0xc800
 #define SIO_NCT6792_ID		0xc910
 #define SIO_NCT6793_ID		0xd120
+#define SIO_NCT6795_ID		0xd350
 #define SIO_ID_MASK		0xFFF0
 
 enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
@@ -360,12 +368,24 @@ static const char *const nct6775_temp_label[] = {
 	"PCH_DIM3_TEMP"
 };
 
-static const u16 NCT6775_REG_TEMP_ALTERNATE[ARRAY_SIZE(nct6775_temp_label) - 1]
-	= { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x661, 0x662, 0x664 };
+#define NCT6775_TEMP_MASK	0x001ffffe
+
+static const u16 NCT6775_REG_TEMP_ALTERNATE[32] = {
+	[13] = 0x661,
+	[14] = 0x662,
+	[15] = 0x664,
+};
 
-static const u16 NCT6775_REG_TEMP_CRIT[ARRAY_SIZE(nct6775_temp_label) - 1]
-	= { 0, 0, 0, 0, 0xa00, 0xa01, 0xa02, 0xa03, 0xa04, 0xa05, 0xa06,
-	    0xa07 };
+static const u16 NCT6775_REG_TEMP_CRIT[32] = {
+	[4] = 0xa00,
+	[5] = 0xa01,
+	[6] = 0xa02,
+	[7] = 0xa03,
+	[8] = 0xa04,
+	[9] = 0xa05,
+	[10] = 0xa06,
+	[11] = 0xa07
+};
 
 /* NCT6776 specific data */
 
@@ -434,11 +454,18 @@ static const char *const nct6776_temp_label[] = {
 	"BYTE_TEMP"
 };
 
-static const u16 NCT6776_REG_TEMP_ALTERNATE[ARRAY_SIZE(nct6776_temp_label) - 1]
-	= { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x401, 0x402, 0x404 };
+#define NCT6776_TEMP_MASK	0x007ffffe
 
-static const u16 NCT6776_REG_TEMP_CRIT[ARRAY_SIZE(nct6776_temp_label) - 1]
-	= { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x709, 0x70a };
+static const u16 NCT6776_REG_TEMP_ALTERNATE[32] = {
+	[14] = 0x401,
+	[15] = 0x402,
+	[16] = 0x404,
+};
+
+static const u16 NCT6776_REG_TEMP_CRIT[32] = {
+	[11] = 0x709,
+	[12] = 0x70a,
+};
 
 /* NCT6779 specific data */
 
@@ -525,17 +552,19 @@ static const char *const nct6779_temp_label[] = {
 	"Virtual_TEMP"
 };
 
-#define NCT6779_NUM_LABELS	(ARRAY_SIZE(nct6779_temp_label) - 5)
-#define NCT6791_NUM_LABELS	ARRAY_SIZE(nct6779_temp_label)
+#define NCT6779_TEMP_MASK	0x07ffff7e
+#define NCT6791_TEMP_MASK	0x87ffff7e
 
-static const u16 NCT6779_REG_TEMP_ALTERNATE[NCT6791_NUM_LABELS - 1]
+static const u16 NCT6779_REG_TEMP_ALTERNATE[32]
 	= { 0x490, 0x491, 0x492, 0x493, 0x494, 0x495, 0, 0,
 	    0, 0, 0, 0, 0, 0, 0, 0,
 	    0, 0x400, 0x401, 0x402, 0x404, 0x405, 0x406, 0x407,
 	    0x408, 0 };
 
-static const u16 NCT6779_REG_TEMP_CRIT[NCT6791_NUM_LABELS - 1]
-	= { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x709, 0x70a };
+static const u16 NCT6779_REG_TEMP_CRIT[32] = {
+	[15] = 0x709,
+	[16] = 0x70a,
+};
 
 /* NCT6791 specific data */
 
@@ -602,6 +631,8 @@ static const char *const nct6792_temp_label[] = {
 	"Virtual_TEMP"
 };
 
+#define NCT6792_TEMP_MASK	0x9fffff7e
+
 static const char *const nct6793_temp_label[] = {
 	"",
 	"SYSTIN",
@@ -637,6 +668,45 @@ static const char *const nct6793_temp_label[] = {
 	"Virtual_TEMP"
 };
 
+#define NCT6793_TEMP_MASK	0xbfff037e
+
+static const char *const nct6795_temp_label[] = {
+	"",
+	"SYSTIN",
+	"CPUTIN",
+	"AUXTIN0",
+	"AUXTIN1",
+	"AUXTIN2",
+	"AUXTIN3",
+	"",
+	"SMBUSMASTER 0",
+	"SMBUSMASTER 1",
+	"SMBUSMASTER 2",
+	"SMBUSMASTER 3",
+	"SMBUSMASTER 4",
+	"SMBUSMASTER 5",
+	"SMBUSMASTER 6",
+	"SMBUSMASTER 7",
+	"PECI Agent 0",
+	"PECI Agent 1",
+	"PCH_CHIP_CPU_MAX_TEMP",
+	"PCH_CHIP_TEMP",
+	"PCH_CPU_TEMP",
+	"PCH_MCH_TEMP",
+	"PCH_DIM0_TEMP",
+	"PCH_DIM1_TEMP",
+	"PCH_DIM2_TEMP",
+	"PCH_DIM3_TEMP",
+	"BYTE_TEMP0",
+	"BYTE_TEMP1",
+	"PECI Agent 0 Calibration",
+	"PECI Agent 1 Calibration",
+	"",
+	"Virtual_TEMP"
+};
+
+#define NCT6795_TEMP_MASK	0xbfffff7e
+
 /* NCT6102D/NCT6106D specific data */
 
 #define NCT6106_REG_VBAT	0x318
@@ -731,11 +801,16 @@ static const s8 NCT6106_BEEP_BITS[] = {
 	34, -1				/* intrusion0, intrusion1 */
 };
 
-static const u16 NCT6106_REG_TEMP_ALTERNATE[ARRAY_SIZE(nct6776_temp_label) - 1]
-	= { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x51, 0x52, 0x54 };
+static const u16 NCT6106_REG_TEMP_ALTERNATE[32] = {
+	[14] = 0x51,
+	[15] = 0x52,
+	[16] = 0x54,
+};
 
-static const u16 NCT6106_REG_TEMP_CRIT[ARRAY_SIZE(nct6776_temp_label) - 1]
-	= { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x204, 0x205 };
+static const u16 NCT6106_REG_TEMP_CRIT[32] = {
+	[11] = 0x204,
+	[12] = 0x205,
+};
 
 static enum pwm_enable reg_to_pwm_enable(int pwm, int mode)
 {
@@ -810,7 +885,7 @@ static u16 fan_to_reg(u32 fan, unsigned int divreg)
 static inline unsigned int
 div_from_reg(u8 reg)
 {
-	return 1 << reg;
+	return BIT(reg);
 }
 
 /*
@@ -850,7 +925,7 @@ struct nct6775_data {
 	u8 temp_src[NUM_TEMP];
 	u16 reg_temp_config[NUM_TEMP];
 	const char * const *temp_label;
-	int temp_label_num;
+	u32 temp_mask;
 
 	u16 REG_CONFIG;
 	u16 REG_VBAT;
@@ -1155,6 +1230,7 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg)
 	case nct6791:
 	case nct6792:
 	case nct6793:
+	case nct6795:
 		return reg == 0x150 || reg == 0x153 || reg == 0x155 ||
 		  ((reg & 0xfff0) == 0x4b0 && (reg & 0x000f) < 0x0b) ||
 		  reg == 0x402 ||
@@ -1276,7 +1352,7 @@ static void nct6775_update_fan_div(struct nct6775_data *data)
 	data->fan_div[1] = (i & 0x70) >> 4;
 	i = nct6775_read_value(data, NCT6775_REG_FANDIV2);
 	data->fan_div[2] = i & 0x7;
-	if (data->has_fan & (1 << 3))
+	if (data->has_fan & BIT(3))
 		data->fan_div[3] = (i & 0x70) >> 4;
 }
 
@@ -1298,7 +1374,7 @@ static void nct6775_init_fan_div(struct nct6775_data *data)
 	 * We'll compute a better divider later on.
 	 */
 	for (i = 0; i < ARRAY_SIZE(data->fan_div); i++) {
-		if (!(data->has_fan & (1 << i)))
+		if (!(data->has_fan & BIT(i)))
 			continue;
 		if (data->fan_div[i] == 0) {
 			data->fan_div[i] = 7;
@@ -1321,7 +1397,7 @@ static void nct6775_init_fan_common(struct device *dev,
 	 * prevents the unnecessary warning when fanX_min is reported as 0.
 	 */
 	for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) {
-		if (data->has_fan_min & (1 << i)) {
+		if (data->has_fan_min & BIT(i)) {
 			reg = nct6775_read_value(data, data->REG_FAN_MIN[i]);
 			if (!reg)
 				nct6775_write_value(data, data->REG_FAN_MIN[i],
@@ -1356,7 +1432,7 @@ static void nct6775_select_fan_div(struct device *dev,
 			div_from_reg(fan_div));
 
 		/* Preserve min limit if possible */
-		if (data->has_fan_min & (1 << nr)) {
+		if (data->has_fan_min & BIT(nr)) {
 			fan_min = data->fan_min[nr];
 			if (fan_div > data->fan_div[nr]) {
 				if (fan_min != 255 && fan_min > 1)
@@ -1387,7 +1463,7 @@ static void nct6775_update_pwm(struct device *dev)
 	bool duty_is_dc;
 
 	for (i = 0; i < data->pwm_num; i++) {
-		if (!(data->has_pwm & (1 << i)))
+		if (!(data->has_pwm & BIT(i)))
 			continue;
 
 		duty_is_dc = data->REG_PWM_MODE[i] &&
@@ -1457,7 +1533,7 @@ static void nct6775_update_pwm_limits(struct device *dev)
 	u16 reg_t;
 
 	for (i = 0; i < data->pwm_num; i++) {
-		if (!(data->has_pwm & (1 << i)))
+		if (!(data->has_pwm & BIT(i)))
 			continue;
 
 		for (j = 0; j < ARRAY_SIZE(data->fan_time); j++) {
@@ -1507,6 +1583,7 @@ static void nct6775_update_pwm_limits(struct device *dev)
 		case nct6791:
 		case nct6792:
 		case nct6793:
+		case nct6795:
 			reg = nct6775_read_value(data,
 					data->REG_CRITICAL_PWM_ENABLE[i]);
 			if (reg & data->CRITICAL_PWM_ENABLE_MASK)
@@ -1534,7 +1611,7 @@ static struct nct6775_data *nct6775_update_device(struct device *dev)
 
 		/* Measured voltages and limits */
 		for (i = 0; i < data->in_num; i++) {
-			if (!(data->have_in & (1 << i)))
+			if (!(data->have_in & BIT(i)))
 				continue;
 
 			data->in[i][0] = nct6775_read_value(data,
@@ -1549,14 +1626,14 @@ static struct nct6775_data *nct6775_update_device(struct device *dev)
 		for (i = 0; i < ARRAY_SIZE(data->rpm); i++) {
 			u16 reg;
 
-			if (!(data->has_fan & (1 << i)))
+			if (!(data->has_fan & BIT(i)))
 				continue;
 
 			reg = nct6775_read_value(data, data->REG_FAN[i]);
 			data->rpm[i] = data->fan_from_reg(reg,
 							  data->fan_div[i]);
 
-			if (data->has_fan_min & (1 << i))
+			if (data->has_fan_min & BIT(i))
 				data->fan_min[i] = nct6775_read_value(data,
 					   data->REG_FAN_MIN[i]);
 			data->fan_pulses[i] =
@@ -1571,7 +1648,7 @@ static struct nct6775_data *nct6775_update_device(struct device *dev)
 
 		/* Measured temperatures and limits */
 		for (i = 0; i < NUM_TEMP; i++) {
-			if (!(data->have_temp & (1 << i)))
+			if (!(data->have_temp & BIT(i)))
 				continue;
 			for (j = 0; j < ARRAY_SIZE(data->reg_temp); j++) {
 				if (data->reg_temp[j][i])
@@ -1580,7 +1657,7 @@ static struct nct6775_data *nct6775_update_device(struct device *dev)
 						data->reg_temp[j][i]);
 			}
 			if (i >= NUM_TEMP_FIXED ||
-			    !(data->have_temp_fixed & (1 << i)))
+			    !(data->have_temp_fixed & BIT(i)))
 				continue;
 			data->temp_offset[i]
 			  = nct6775_read_value(data, data->REG_TEMP_OFFSET[i]);
@@ -1801,7 +1878,7 @@ static umode_t nct6775_in_is_visible(struct kobject *kobj,
 	struct nct6775_data *data = dev_get_drvdata(dev);
 	int in = index / 5;	/* voltage index */
 
-	if (!(data->have_in & (1 << in)))
+	if (!(data->have_in & BIT(in)))
 		return 0;
 
 	return attr->mode;
@@ -1911,7 +1988,7 @@ store_fan_min(struct device *dev, struct device_attribute *attr,
 		 * even with the highest divider (128)
 		 */
 		data->fan_min[nr] = 254;
-		new_div = 7; /* 128 == (1 << 7) */
+		new_div = 7; /* 128 == BIT(7) */
 		dev_warn(dev,
 			 "fan%u low limit %lu below minimum %u, set to minimum\n",
 			 nr + 1, val, data->fan_from_reg_min(254, 7));
@@ -1921,7 +1998,7 @@ store_fan_min(struct device *dev, struct device_attribute *attr,
 		 * even with the lowest divider (1)
 		 */
 		data->fan_min[nr] = 1;
-		new_div = 0; /* 1 == (1 << 0) */
+		new_div = 0; /* 1 == BIT(0) */
 		dev_warn(dev,
 			 "fan%u low limit %lu above maximum %u, set to maximum\n",
 			 nr + 1, val, data->fan_from_reg_min(1, 0));
@@ -2008,14 +2085,14 @@ static umode_t nct6775_fan_is_visible(struct kobject *kobj,
 	int fan = index / 6;	/* fan index */
 	int nr = index % 6;	/* attribute index */
 
-	if (!(data->has_fan & (1 << fan)))
+	if (!(data->has_fan & BIT(fan)))
 		return 0;
 
 	if (nr == 1 && data->ALARM_BITS[FAN_ALARM_BASE + fan] == -1)
 		return 0;
 	if (nr == 2 && data->BEEP_BITS[FAN_ALARM_BASE + fan] == -1)
 		return 0;
-	if (nr == 4 && !(data->has_fan_min & (1 << fan)))
+	if (nr == 4 && !(data->has_fan_min & BIT(fan)))
 		return 0;
 	if (nr == 5 && data->kind != nct6775)
 		return 0;
@@ -2193,7 +2270,10 @@ static umode_t nct6775_temp_is_visible(struct kobject *kobj,
 	int temp = index / 10;	/* temp index */
 	int nr = index % 10;	/* attribute index */
 
-	if (!(data->have_temp & (1 << temp)))
+	if (!(data->have_temp & BIT(temp)))
+		return 0;
+
+	if (nr == 1 && !data->temp_label)
 		return 0;
 
 	if (nr == 2 && find_temp_source(data, temp, data->num_temp_alarms) < 0)
@@ -2215,7 +2295,7 @@ static umode_t nct6775_temp_is_visible(struct kobject *kobj,
 		return 0;
 
 	/* offset and type only apply to fixed sensors */
-	if (nr > 7 && !(data->have_temp_fixed & (1 << temp)))
+	if (nr > 7 && !(data->have_temp_fixed & BIT(temp)))
 		return 0;
 
 	return attr->mode;
@@ -2484,7 +2564,7 @@ show_pwm_temp_sel_common(struct nct6775_data *data, char *buf, int src)
 	int i, sel = 0;
 
 	for (i = 0; i < NUM_TEMP; i++) {
-		if (!(data->have_temp & (1 << i)))
+		if (!(data->have_temp & BIT(i)))
 			continue;
 		if (src == data->temp_src[i]) {
 			sel = i + 1;
@@ -2520,7 +2600,7 @@ store_pwm_temp_sel(struct device *dev, struct device_attribute *attr,
 		return err;
 	if (val == 0 || val > NUM_TEMP)
 		return -EINVAL;
-	if (!(data->have_temp & (1 << (val - 1))) || !data->temp_src[val - 1])
+	if (!(data->have_temp & BIT(val - 1)) || !data->temp_src[val - 1])
 		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
@@ -2562,7 +2642,7 @@ store_pwm_weight_temp_sel(struct device *dev, struct device_attribute *attr,
 		return err;
 	if (val > NUM_TEMP)
 		return -EINVAL;
-	if (val && (!(data->have_temp & (1 << (val - 1))) ||
+	if (val && (!(data->have_temp & BIT(val - 1)) ||
 		    !data->temp_src[val - 1]))
 		return -EINVAL;
 
@@ -2923,6 +3003,7 @@ store_auto_pwm(struct device *dev, struct device_attribute *attr,
 		case nct6791:
 		case nct6792:
 		case nct6793:
+		case nct6795:
 			nct6775_write_value(data, data->REG_CRITICAL_PWM[nr],
 					    val);
 			reg = nct6775_read_value(data,
@@ -2995,7 +3076,7 @@ static umode_t nct6775_pwm_is_visible(struct kobject *kobj,
 	int pwm = index / 36;	/* pwm index */
 	int nr = index % 36;	/* attribute index */
 
-	if (!(data->has_pwm & (1 << pwm)))
+	if (!(data->has_pwm & BIT(pwm)))
 		return 0;
 
 	if ((nr >= 14 && nr <= 18) || nr == 21)   /* weight */
@@ -3246,7 +3327,7 @@ static inline void nct6775_init_device(struct nct6775_data *data)
 
 	/* Enable temperature sensors if needed */
 	for (i = 0; i < NUM_TEMP; i++) {
-		if (!(data->have_temp & (1 << i)))
+		if (!(data->have_temp & BIT(i)))
 			continue;
 		if (!data->reg_temp_config[i])
 			continue;
@@ -3264,7 +3345,7 @@ static inline void nct6775_init_device(struct nct6775_data *data)
 	diode = nct6775_read_value(data, data->REG_DIODE);
 
 	for (i = 0; i < data->temp_fixed_num; i++) {
-		if (!(data->have_temp_fixed & (1 << i)))
+		if (!(data->have_temp_fixed & BIT(i)))
 			continue;
 		if ((tmp & (data->DIODE_MASK << i)))	/* diode */
 			data->temp_type[i]
@@ -3290,8 +3371,8 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 	if (data->kind == nct6775) {
 		regval = superio_inb(sioreg, 0x2c);
 
-		fan3pin = regval & (1 << 6);
-		pwm3pin = regval & (1 << 7);
+		fan3pin = regval & BIT(6);
+		pwm3pin = regval & BIT(7);
 
 		/* On NCT6775, fan4 shares pins with the fdc interface */
 		fan4pin = !(superio_inb(sioreg, 0x2A) & 0x80);
@@ -3357,28 +3438,57 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 		pwm4pin = false;
 		pwm5pin = false;
 		pwm6pin = false;
-	} else {	/* NCT6779D, NCT6791D, NCT6792D, or NCT6793D */
-		regval = superio_inb(sioreg, 0x1c);
+	} else { /* NCT6779D, NCT6791D, NCT6792D, NCT6793D, or NCT6795D */
+		int regval_1b, regval_2a, regval_eb;
 
-		fan3pin = !(regval & (1 << 5));
-		fan4pin = !(regval & (1 << 6));
-		fan5pin = !(regval & (1 << 7));
+		regval = superio_inb(sioreg, 0x1c);
 
-		pwm3pin = !(regval & (1 << 0));
-		pwm4pin = !(regval & (1 << 1));
-		pwm5pin = !(regval & (1 << 2));
+		fan3pin = !(regval & BIT(5));
+		fan4pin = !(regval & BIT(6));
+		fan5pin = !(regval & BIT(7));
 
-		fan4min = fan4pin;
+		pwm3pin = !(regval & BIT(0));
+		pwm4pin = !(regval & BIT(1));
+		pwm5pin = !(regval & BIT(2));
 
-		if (data->kind == nct6791 || data->kind == nct6792 ||
-		    data->kind == nct6793) {
-			regval = superio_inb(sioreg, 0x2d);
-			fan6pin = (regval & (1 << 1));
-			pwm6pin = (regval & (1 << 0));
-		} else {	/* NCT6779D */
+		regval = superio_inb(sioreg, 0x2d);
+		switch (data->kind) {
+		case nct6791:
+		case nct6792:
+			fan6pin = regval & BIT(1);
+			pwm6pin = regval & BIT(0);
+			break;
+		case nct6793:
+		case nct6795:
+			regval_1b = superio_inb(sioreg, 0x1b);
+			regval_2a = superio_inb(sioreg, 0x2a);
+
+			if (!pwm5pin)
+				pwm5pin = regval & BIT(7);
+			fan6pin = regval & BIT(1);
+			pwm6pin = regval & BIT(0);
+			if (!fan5pin)
+				fan5pin = regval_1b & BIT(5);
+
+			superio_select(sioreg, NCT6775_LD_12);
+			regval_eb = superio_inb(sioreg, 0xeb);
+			if (!fan5pin)
+				fan5pin = regval_eb & BIT(5);
+			if (!pwm5pin)
+				pwm5pin = (regval_eb & BIT(4)) &&
+					   !(regval_2a & BIT(0));
+			if (!fan6pin)
+				fan6pin = regval_eb & BIT(3);
+			if (!pwm6pin)
+				pwm6pin = regval_eb & BIT(2);
+			break;
+		default:	/* NCT6779D */
 			fan6pin = false;
 			pwm6pin = false;
+			break;
 		}
+
+		fan4min = fan4pin;
 	}
 
 	/* fan 1 and 2 (0x03) are always present */
@@ -3403,16 +3513,15 @@ static void add_temp_sensors(struct nct6775_data *data, const u16 *regp,
 			continue;
 		src = nct6775_read_value(data, regp[i]);
 		src &= 0x1f;
-		if (!src || (*mask & (1 << src)))
+		if (!src || (*mask & BIT(src)))
 			continue;
-		if (src >= data->temp_label_num ||
-		    !strlen(data->temp_label[src]))
+		if (!(data->temp_mask & BIT(src)))
 			continue;
 
 		index = __ffs(*available);
 		nct6775_write_value(data, data->REG_TEMP_SOURCE[index], src);
-		*available &= ~(1 << index);
-		*mask |= 1 << src;
+		*available &= ~BIT(index);
+		*mask |= BIT(src);
 	}
 }
 
@@ -3464,7 +3573,7 @@ static int nct6775_probe(struct platform_device *pdev)
 		data->fan_from_reg_min = fan_from_reg13;
 
 		data->temp_label = nct6776_temp_label;
-		data->temp_label_num = ARRAY_SIZE(nct6776_temp_label);
+		data->temp_mask = NCT6776_TEMP_MASK;
 
 		data->REG_VBAT = NCT6106_REG_VBAT;
 		data->REG_DIODE = NCT6106_REG_DIODE;
@@ -3542,7 +3651,7 @@ static int nct6775_probe(struct platform_device *pdev)
 		data->speed_tolerance_limit = 15;
 
 		data->temp_label = nct6775_temp_label;
-		data->temp_label_num = ARRAY_SIZE(nct6775_temp_label);
+		data->temp_mask = NCT6775_TEMP_MASK;
 
 		data->REG_CONFIG = NCT6775_REG_CONFIG;
 		data->REG_VBAT = NCT6775_REG_VBAT;
@@ -3614,7 +3723,7 @@ static int nct6775_probe(struct platform_device *pdev)
 		data->speed_tolerance_limit = 63;
 
 		data->temp_label = nct6776_temp_label;
-		data->temp_label_num = ARRAY_SIZE(nct6776_temp_label);
+		data->temp_mask = NCT6776_TEMP_MASK;
 
 		data->REG_CONFIG = NCT6775_REG_CONFIG;
 		data->REG_VBAT = NCT6775_REG_VBAT;
@@ -3686,7 +3795,7 @@ static int nct6775_probe(struct platform_device *pdev)
 		data->speed_tolerance_limit = 63;
 
 		data->temp_label = nct6779_temp_label;
-		data->temp_label_num = NCT6779_NUM_LABELS;
+		data->temp_mask = NCT6779_TEMP_MASK;
 
 		data->REG_CONFIG = NCT6775_REG_CONFIG;
 		data->REG_VBAT = NCT6775_REG_VBAT;
@@ -3746,6 +3855,7 @@ static int nct6775_probe(struct platform_device *pdev)
 	case nct6791:
 	case nct6792:
 	case nct6793:
+	case nct6795:
 		data->in_num = 15;
 		data->pwm_num = 6;
 		data->auto_pwm_num = 4;
@@ -3767,15 +3877,21 @@ static int nct6775_probe(struct platform_device *pdev)
 		default:
 		case nct6791:
 			data->temp_label = nct6779_temp_label;
+			data->temp_mask = NCT6791_TEMP_MASK;
 			break;
 		case nct6792:
 			data->temp_label = nct6792_temp_label;
+			data->temp_mask = NCT6792_TEMP_MASK;
 			break;
 		case nct6793:
 			data->temp_label = nct6793_temp_label;
+			data->temp_mask = NCT6793_TEMP_MASK;
+			break;
+		case nct6795:
+			data->temp_label = nct6795_temp_label;
+			data->temp_mask = NCT6795_TEMP_MASK;
 			break;
 		}
-		data->temp_label_num = NCT6791_NUM_LABELS;
 
 		data->REG_CONFIG = NCT6775_REG_CONFIG;
 		data->REG_VBAT = NCT6775_REG_VBAT;
@@ -3843,7 +3959,7 @@ static int nct6775_probe(struct platform_device *pdev)
 	default:
 		return -ENODEV;
 	}
-	data->have_in = (1 << data->in_num) - 1;
+	data->have_in = BIT(data->in_num) - 1;
 	data->have_temp = 0;
 
 	/*
@@ -3861,10 +3977,10 @@ static int nct6775_probe(struct platform_device *pdev)
 			continue;
 
 		src = nct6775_read_value(data, data->REG_TEMP_SOURCE[i]) & 0x1f;
-		if (!src || (mask & (1 << src)))
-			available |= 1 << i;
+		if (!src || (mask & BIT(src)))
+			available |= BIT(i);
 
-		mask |= 1 << src;
+		mask |= BIT(src);
 	}
 
 	/*
@@ -3881,23 +3997,22 @@ static int nct6775_probe(struct platform_device *pdev)
 			continue;
 
 		src = nct6775_read_value(data, data->REG_TEMP_SOURCE[i]) & 0x1f;
-		if (!src || (mask & (1 << src)))
+		if (!src || (mask & BIT(src)))
 			continue;
 
-		if (src >= data->temp_label_num ||
-		    !strlen(data->temp_label[src])) {
+		if (!(data->temp_mask & BIT(src))) {
 			dev_info(dev,
 				 "Invalid temperature source %d at index %d, source register 0x%x, temp register 0x%x\n",
 				 src, i, data->REG_TEMP_SOURCE[i], reg_temp[i]);
 			continue;
 		}
 
-		mask |= 1 << src;
+		mask |= BIT(src);
 
 		/* Use fixed index for SYSTIN(1), CPUTIN(2), AUXTIN(3) */
 		if (src <= data->temp_fixed_num) {
-			data->have_temp |= 1 << (src - 1);
-			data->have_temp_fixed |= 1 << (src - 1);
+			data->have_temp |= BIT(src - 1);
+			data->have_temp_fixed |= BIT(src - 1);
 			data->reg_temp[0][src - 1] = reg_temp[i];
 			data->reg_temp[1][src - 1] = reg_temp_over[i];
 			data->reg_temp[2][src - 1] = reg_temp_hyst[i];
@@ -3917,7 +4032,7 @@ static int nct6775_probe(struct platform_device *pdev)
 			continue;
 
 		/* Use dynamic index for other sources */
-		data->have_temp |= 1 << s;
+		data->have_temp |= BIT(s);
 		data->reg_temp[0][s] = reg_temp[i];
 		data->reg_temp[1][s] = reg_temp_over[i];
 		data->reg_temp[2][s] = reg_temp_hyst[i];
@@ -3945,8 +4060,7 @@ static int nct6775_probe(struct platform_device *pdev)
 		if (!src)
 			continue;
 
-		if (src >= data->temp_label_num ||
-		    !strlen(data->temp_label[src])) {
+		if (!(data->temp_mask & BIT(src))) {
 			dev_info(dev,
 				 "Invalid temperature source %d at index %d, source register 0x%x, temp register 0x%x\n",
 				 src, i, data->REG_TEMP_SEL[i],
@@ -3960,17 +4074,17 @@ static int nct6775_probe(struct platform_device *pdev)
 		 * are no duplicates.
 		 */
 		if (src != TEMP_SOURCE_VIRTUAL) {
-			if (mask & (1 << src))
+			if (mask & BIT(src))
 				continue;
-			mask |= 1 << src;
+			mask |= BIT(src);
 		}
 
 		/* Use fixed index for SYSTIN(1), CPUTIN(2), AUXTIN(3) */
 		if (src <= data->temp_fixed_num) {
-			if (data->have_temp & (1 << (src - 1)))
+			if (data->have_temp & BIT(src - 1))
 				continue;
-			data->have_temp |= 1 << (src - 1);
-			data->have_temp_fixed |= 1 << (src - 1);
+			data->have_temp |= BIT(src - 1);
+			data->have_temp_fixed |= BIT(src - 1);
 			data->reg_temp[0][src - 1] = reg_temp_mon[i];
 			data->temp_src[src - 1] = src;
 			continue;
@@ -3980,7 +4094,7 @@ static int nct6775_probe(struct platform_device *pdev)
 			continue;
 
 		/* Use dynamic index for other sources */
-		data->have_temp |= 1 << s;
+		data->have_temp |= BIT(s);
 		data->reg_temp[0][s] = reg_temp_mon[i];
 		data->temp_src[s] = src;
 		s++;
@@ -3993,16 +4107,18 @@ static int nct6775_probe(struct platform_device *pdev)
 	 * The temperature is already monitored if the respective bit in <mask>
 	 * is set.
 	 */
-	for (i = 0; i < data->temp_label_num - 1; i++) {
+	for (i = 0; i < 32; i++) {
+		if (!(data->temp_mask & BIT(i + 1)))
+			continue;
 		if (!reg_temp_alternate[i])
 			continue;
-		if (mask & (1 << (i + 1)))
+		if (mask & BIT(i + 1))
 			continue;
 		if (i < data->temp_fixed_num) {
-			if (data->have_temp & (1 << i))
+			if (data->have_temp & BIT(i))
 				continue;
-			data->have_temp |= 1 << i;
-			data->have_temp_fixed |= 1 << i;
+			data->have_temp |= BIT(i);
+			data->have_temp_fixed |= BIT(i);
 			data->reg_temp[0][i] = reg_temp_alternate[i];
 			if (i < num_reg_temp) {
 				data->reg_temp[1][i] = reg_temp_over[i];
@@ -4015,7 +4131,7 @@ static int nct6775_probe(struct platform_device *pdev)
 		if (s >= NUM_TEMP)	/* Abort if no more space */
 			break;
 
-		data->have_temp |= 1 << s;
+		data->have_temp |= BIT(s);
 		data->reg_temp[0][s] = reg_temp_alternate[i];
 		data->temp_src[s] = i + 1;
 		s++;
@@ -4042,6 +4158,7 @@ static int nct6775_probe(struct platform_device *pdev)
 	case nct6791:
 	case nct6792:
 	case nct6793:
+	case nct6795:
 		break;
 	}
 
@@ -4075,6 +4192,7 @@ static int nct6775_probe(struct platform_device *pdev)
 		case nct6791:
 		case nct6792:
 		case nct6793:
+		case nct6795:
 			tmp |= 0x7e;
 			break;
 		}
@@ -4173,14 +4291,14 @@ static int __maybe_unused nct6775_resume(struct device *dev)
 		superio_outb(sioreg, SIO_REG_ENABLE, data->sio_reg_enable);
 
 	if (data->kind == nct6791 || data->kind == nct6792 ||
-	    data->kind == nct6793)
+	    data->kind == nct6793 || data->kind == nct6795)
 		nct6791_enable_io_mapping(sioreg);
 
 	superio_exit(sioreg);
 
 	/* Restore limits */
 	for (i = 0; i < data->in_num; i++) {
-		if (!(data->have_in & (1 << i)))
+		if (!(data->have_in & BIT(i)))
 			continue;
 
 		nct6775_write_value(data, data->REG_IN_MINMAX[0][i],
@@ -4190,7 +4308,7 @@ static int __maybe_unused nct6775_resume(struct device *dev)
 	}
 
 	for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) {
-		if (!(data->has_fan_min & (1 << i)))
+		if (!(data->has_fan_min & BIT(i)))
 			continue;
 
 		nct6775_write_value(data, data->REG_FAN_MIN[i],
@@ -4198,7 +4316,7 @@ static int __maybe_unused nct6775_resume(struct device *dev)
 	}
 
 	for (i = 0; i < NUM_TEMP; i++) {
-		if (!(data->have_temp & (1 << i)))
+		if (!(data->have_temp & BIT(i)))
 			continue;
 
 		for (j = 1; j < ARRAY_SIZE(data->reg_temp); j++)
@@ -4270,6 +4388,9 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
 	case SIO_NCT6793_ID:
 		sio_data->kind = nct6793;
 		break;
+	case SIO_NCT6795_ID:
+		sio_data->kind = nct6795;
+		break;
 	default:
 		if (val != 0xffff)
 			pr_debug("unsupported chip ID: 0x%04x\n", val);
@@ -4296,7 +4417,7 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
 	}
 
 	if (sio_data->kind == nct6791 || sio_data->kind == nct6792 ||
-	    sio_data->kind == nct6793)
+	    sio_data->kind == nct6793 || sio_data->kind == nct6795)
 		nct6791_enable_io_mapping(sioaddr);
 
 	superio_exit(sioaddr);

drivers/hwmon/pmbus/Kconfig

@@ -37,6 +37,16 @@ config SENSORS_ADM1275
 	  This driver can also be built as a module. If so, the module will
 	  be called adm1275.
 
+config SENSORS_IR35221
+	tristate "Infineon IR35221"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for the
+	  Infineon IR35221 controller.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ir35521.
+
 config SENSORS_LM25066
 	tristate "National Semiconductor LM25066 and compatibles"
 	default n

drivers/hwmon/pmbus/Makefile

@@ -5,6 +5,7 @@
 obj-$(CONFIG_PMBUS)		+= pmbus_core.o
 obj-$(CONFIG_SENSORS_PMBUS)	+= pmbus.o
 obj-$(CONFIG_SENSORS_ADM1275)	+= adm1275.o
+obj-$(CONFIG_SENSORS_IR35221)	+= ir35221.o
 obj-$(CONFIG_SENSORS_LM25066)	+= lm25066.o
 obj-$(CONFIG_SENSORS_LTC2978)	+= ltc2978.o
 obj-$(CONFIG_SENSORS_LTC3815)	+= ltc3815.o

drivers/hwmon/pmbus/ir35221.c

@@ -0,0 +1,337 @@
+/*
+ * Hardware monitoring driver for IR35221
+ *
+ * Copyright (C) IBM Corporation 2017.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define IR35221_MFR_VIN_PEAK		0xc5
+#define IR35221_MFR_VOUT_PEAK		0xc6
+#define IR35221_MFR_IOUT_PEAK		0xc7
+#define IR35221_MFR_TEMP_PEAK		0xc8
+#define IR35221_MFR_VIN_VALLEY		0xc9
+#define IR35221_MFR_VOUT_VALLEY		0xca
+#define IR35221_MFR_IOUT_VALLEY		0xcb
+#define IR35221_MFR_TEMP_VALLEY		0xcc
+
+static long ir35221_reg2data(int data, enum pmbus_sensor_classes class)
+{
+	s16 exponent;
+	s32 mantissa;
+	long val;
+
+	/* We only modify LINEAR11 formats */
+	exponent = ((s16)data) >> 11;
+	mantissa = ((s16)((data & 0x7ff) << 5)) >> 5;
+
+	val = mantissa * 1000L;
+
+	/* scale result to micro-units for power sensors */
+	if (class == PSC_POWER)
+		val = val * 1000L;
+
+	if (exponent >= 0)
+		val <<= exponent;
+	else
+		val >>= -exponent;
+
+	return val;
+}
+
+#define MAX_MANTISSA	(1023 * 1000)
+#define MIN_MANTISSA	(511 * 1000)
+
+static u16 ir35221_data2reg(long val, enum pmbus_sensor_classes class)
+{
+	s16 exponent = 0, mantissa;
+	bool negative = false;
+
+	if (val == 0)
+		return 0;
+
+	if (val < 0) {
+		negative = true;
+		val = -val;
+	}
+
+	/* Power is in uW. Convert to mW before converting. */
+	if (class == PSC_POWER)
+		val = DIV_ROUND_CLOSEST(val, 1000L);
+
+	/* Reduce large mantissa until it fits into 10 bit */
+	while (val >= MAX_MANTISSA && exponent < 15) {
+		exponent++;
+		val >>= 1;
+	}
+	/* Increase small mantissa to improve precision */
+	while (val < MIN_MANTISSA && exponent > -15) {
+		exponent--;
+		val <<= 1;
+	}
+
+	/* Convert mantissa from milli-units to units */
+	mantissa = DIV_ROUND_CLOSEST(val, 1000);
+
+	/* Ensure that resulting number is within range */
+	if (mantissa > 0x3ff)
+		mantissa = 0x3ff;
+
+	/* restore sign */
+	if (negative)
+		mantissa = -mantissa;
+
+	/* Convert to 5 bit exponent, 11 bit mantissa */
+	return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800);
+}
+
+static u16 ir35221_scale_result(s16 data, int shift,
+				enum pmbus_sensor_classes class)
+{
+	long val;
+
+	val = ir35221_reg2data(data, class);
+
+	if (shift < 0)
+		val >>= -shift;
+	else
+		val <<= shift;
+
+	return ir35221_data2reg(val, class);
+}
+
+static int ir35221_read_word_data(struct i2c_client *client, int page, int reg)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_IOUT_OC_FAULT_LIMIT:
+	case PMBUS_IOUT_OC_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, page, reg);
+		if (ret < 0)
+			break;
+		ret = ir35221_scale_result(ret, 1, PSC_CURRENT_OUT);
+		break;
+	case PMBUS_VIN_OV_FAULT_LIMIT:
+	case PMBUS_VIN_OV_WARN_LIMIT:
+	case PMBUS_VIN_UV_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, page, reg);
+		ret = ir35221_scale_result(ret, -4, PSC_VOLTAGE_IN);
+		break;
+	case PMBUS_IIN_OC_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, page, reg);
+		if (ret < 0)
+			break;
+		ret = ir35221_scale_result(ret, -1, PSC_CURRENT_IN);
+		break;
+	case PMBUS_READ_VIN:
+		ret = pmbus_read_word_data(client, page, PMBUS_READ_VIN);
+		if (ret < 0)
+			break;
+		ret = ir35221_scale_result(ret, -5, PSC_VOLTAGE_IN);
+		break;
+	case PMBUS_READ_IIN:
+		ret = pmbus_read_word_data(client, page, PMBUS_READ_IIN);
+		if (ret < 0)
+			break;
+		if (page == 0)
+			ret = ir35221_scale_result(ret, -4, PSC_CURRENT_IN);
+		else
+			ret = ir35221_scale_result(ret, -5, PSC_CURRENT_IN);
+		break;
+	case PMBUS_READ_POUT:
+		ret = pmbus_read_word_data(client, page, PMBUS_READ_POUT);
+		if (ret < 0)
+			break;
+		ret = ir35221_scale_result(ret, -1, PSC_POWER);
+		break;
+	case PMBUS_READ_PIN:
+		ret = pmbus_read_word_data(client, page, PMBUS_READ_PIN);
+		if (ret < 0)
+			break;
+		ret = ir35221_scale_result(ret, -1, PSC_POWER);
+		break;
+	case PMBUS_READ_IOUT:
+		ret = pmbus_read_word_data(client, page, PMBUS_READ_IOUT);
+		if (ret < 0)
+			break;
+		if (page == 0)
+			ret = ir35221_scale_result(ret, -1, PSC_CURRENT_OUT);
+		else
+			ret = ir35221_scale_result(ret, -2, PSC_CURRENT_OUT);
+		break;
+	case PMBUS_VIRT_READ_VIN_MAX:
+		ret = pmbus_read_word_data(client, page, IR35221_MFR_VIN_PEAK);
+		if (ret < 0)
+			break;
+		ret = ir35221_scale_result(ret, -5, PSC_VOLTAGE_IN);
+		break;
+	case PMBUS_VIRT_READ_VOUT_MAX:
+		ret = pmbus_read_word_data(client, page, IR35221_MFR_VOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MAX:
+		ret = pmbus_read_word_data(client, page, IR35221_MFR_IOUT_PEAK);
+		if (ret < 0)
+			break;
+		if (page == 0)
+			ret = ir35221_scale_result(ret, -1, PSC_CURRENT_IN);
+		else
+			ret = ir35221_scale_result(ret, -2, PSC_CURRENT_IN);
+		break;
+	case PMBUS_VIRT_READ_TEMP_MAX:
+		ret = pmbus_read_word_data(client, page, IR35221_MFR_TEMP_PEAK);
+		break;
+	case PMBUS_VIRT_READ_VIN_MIN:
+		ret = pmbus_read_word_data(client, page,
+					   IR35221_MFR_VIN_VALLEY);
+		if (ret < 0)
+			break;
+		ret = ir35221_scale_result(ret, -5, PSC_VOLTAGE_IN);
+		break;
+	case PMBUS_VIRT_READ_VOUT_MIN:
+		ret = pmbus_read_word_data(client, page,
+					   IR35221_MFR_VOUT_VALLEY);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MIN:
+		ret = pmbus_read_word_data(client, page,
+					   IR35221_MFR_IOUT_VALLEY);
+		if (ret < 0)
+			break;
+		if (page == 0)
+			ret = ir35221_scale_result(ret, -1, PSC_CURRENT_IN);
+		else
+			ret = ir35221_scale_result(ret, -2, PSC_CURRENT_IN);
+		break;
+	case PMBUS_VIRT_READ_TEMP_MIN:
+		ret = pmbus_read_word_data(client, page,
+					   IR35221_MFR_TEMP_VALLEY);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+
+	return ret;
+}
+
+static int ir35221_write_word_data(struct i2c_client *client, int page, int reg,
+				   u16 word)
+{
+	int ret;
+	u16 val;
+
+	switch (reg) {
+	case PMBUS_IOUT_OC_FAULT_LIMIT:
+	case PMBUS_IOUT_OC_WARN_LIMIT:
+		val = ir35221_scale_result(word, -1, PSC_CURRENT_OUT);
+		ret = pmbus_write_word_data(client, page, reg, val);
+		break;
+	case PMBUS_VIN_OV_FAULT_LIMIT:
+	case PMBUS_VIN_OV_WARN_LIMIT:
+	case PMBUS_VIN_UV_WARN_LIMIT:
+		val = ir35221_scale_result(word, 4, PSC_VOLTAGE_IN);
+		ret = pmbus_write_word_data(client, page, reg, val);
+		break;
+	case PMBUS_IIN_OC_WARN_LIMIT:
+		val = ir35221_scale_result(word, 1, PSC_CURRENT_IN);
+		ret = pmbus_write_word_data(client, page, reg, val);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+
+	return ret;
+}
+
+static int ir35221_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct pmbus_driver_info *info;
+	u8 buf[I2C_SMBUS_BLOCK_MAX];
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE_DATA
+				| I2C_FUNC_SMBUS_READ_WORD_DATA
+				| I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+		return -ENODEV;
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read PMBUS_MFR_ID\n");
+		return ret;
+	}
+	if (ret != 2 || strncmp(buf, "RI", strlen("RI"))) {
+		dev_err(&client->dev, "MFR_ID unrecognised\n");
+		return -ENODEV;
+	}
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read PMBUS_MFR_MODEL\n");
+		return ret;
+	}
+	if (ret != 2 || !(buf[0] == 0x6c && buf[1] == 0x00)) {
+		dev_err(&client->dev, "MFR_MODEL unrecognised\n");
+		return -ENODEV;
+	}
+
+	info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info),
+			    GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->write_word_data = ir35221_write_word_data;
+	info->read_word_data = ir35221_read_word_data;
+
+	info->pages = 2;
+	info->format[PSC_VOLTAGE_IN] = linear;
+	info->format[PSC_VOLTAGE_OUT] = linear;
+	info->format[PSC_CURRENT_IN] = linear;
+	info->format[PSC_CURRENT_OUT] = linear;
+	info->format[PSC_POWER] = linear;
+	info->format[PSC_TEMPERATURE] = linear;
+
+	info->func[0] = PMBUS_HAVE_VIN
+		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
+		| PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
+		| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+		| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP;
+	info->func[1] = info->func[0];
+
+	return pmbus_do_probe(client, id, info);
+}
+
+static const struct i2c_device_id ir35221_id[] = {
+	{"ir35221", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, ir35221_id);
+
+static struct i2c_driver ir35221_driver = {
+	.driver = {
+		.name	= "ir35221",
+	},
+	.probe		= ir35221_probe,
+	.remove		= pmbus_do_remove,
+	.id_table	= ir35221_id,
+};
+
+module_i2c_driver(ir35221_driver);
+
+MODULE_AUTHOR("Samuel Mendoza-Jonas <sam@mendozajonas.com");
+MODULE_DESCRIPTION("PMBus driver for IR35221");
+MODULE_LICENSE("GPL");

drivers/hwmon/pmbus/pmbus.c

@@ -25,7 +25,7 @@
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/i2c.h>
-#include <linux/i2c/pmbus.h>
+#include <linux/pmbus.h>
 #include "pmbus.h"
 
 /*

drivers/hwmon/pmbus/pmbus_core.c

@@ -28,7 +28,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/jiffies.h>
-#include <linux/i2c/pmbus.h>
+#include <linux/pmbus.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include "pmbus.h"

drivers/hwmon/pmbus/ucd9000.c

@@ -26,7 +26,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
-#include <linux/i2c/pmbus.h>
+#include <linux/pmbus.h>
 #include "pmbus.h"
 
 enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd9090, ucd90910 };

drivers/hwmon/pmbus/ucd9200.c

@@ -25,7 +25,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
-#include <linux/i2c/pmbus.h>
+#include <linux/pmbus.h>
 #include "pmbus.h"
 
 #define UCD9200_PHASE_INFO	0xd2

drivers/hwmon/pwm-fan.c

@@ -40,31 +40,22 @@ struct pwm_fan_ctx {
 
 static int  __set_pwm(struct pwm_fan_ctx *ctx, unsigned long pwm)
 {
-	struct pwm_args pargs;
-	unsigned long duty;
+	unsigned long period;
 	int ret = 0;
-
-	pwm_get_args(ctx->pwm, &pargs);
+	struct pwm_state state = { };
 
 	mutex_lock(&ctx->lock);
 	if (ctx->pwm_value == pwm)
 		goto exit_set_pwm_err;
 
-	duty = DIV_ROUND_UP(pwm * (pargs.period - 1), MAX_PWM);
-	ret = pwm_config(ctx->pwm, duty, pargs.period);
-	if (ret)
-		goto exit_set_pwm_err;
-
-	if (pwm == 0)
-		pwm_disable(ctx->pwm);
-
-	if (ctx->pwm_value == 0) {
-		ret = pwm_enable(ctx->pwm);
-		if (ret)
-			goto exit_set_pwm_err;
-	}
+	pwm_init_state(ctx->pwm, &state);
+	period = ctx->pwm->args.period;
+	state.duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM);
+	state.enabled = pwm ? true : false;
 
-	ctx->pwm_value = pwm;
+	ret = pwm_apply_state(ctx->pwm, &state);
+	if (!ret)
+		ctx->pwm_value = pwm;
 exit_set_pwm_err:
 	mutex_unlock(&ctx->lock);
 	return ret;
@@ -218,10 +209,9 @@ static int pwm_fan_probe(struct platform_device *pdev)
 {
 	struct thermal_cooling_device *cdev;
 	struct pwm_fan_ctx *ctx;
-	struct pwm_args pargs;
 	struct device *hwmon;
-	int duty_cycle;
 	int ret;
+	struct pwm_state state = { };
 
 	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
 	if (!ctx)
@@ -237,28 +227,16 @@ static int pwm_fan_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ctx);
 
-	/*
-	 * FIXME: pwm_apply_args() should be removed when switching to the
-	 * atomic PWM API.
-	 */
-	pwm_apply_args(ctx->pwm);
-
-	/* Set duty cycle to maximum allowed */
-	pwm_get_args(ctx->pwm, &pargs);
-
-	duty_cycle = pargs.period - 1;
 	ctx->pwm_value = MAX_PWM;
 
-	ret = pwm_config(ctx->pwm, duty_cycle, pargs.period);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to configure PWM\n");
-		return ret;
-	}
+	/* Set duty cycle to maximum allowed and enable PWM output */
+	pwm_init_state(ctx->pwm, &state);
+	state.duty_cycle = ctx->pwm->args.period - 1;
+	state.enabled = true;
 
-	/* Enbale PWM output */
-	ret = pwm_enable(ctx->pwm);
+	ret = pwm_apply_state(ctx->pwm, &state);
 	if (ret) {
-		dev_err(&pdev->dev, "Failed to enable PWM\n");
+		dev_err(&pdev->dev, "Failed to configure PWM\n");
 		return ret;
 	}
 
@@ -266,8 +244,8 @@ static int pwm_fan_probe(struct platform_device *pdev)
 						       ctx, pwm_fan_groups);
 	if (IS_ERR(hwmon)) {
 		dev_err(&pdev->dev, "Failed to register hwmon device\n");
-		pwm_disable(ctx->pwm);
-		return PTR_ERR(hwmon);
+		ret = PTR_ERR(hwmon);
+		goto err_pwm_disable;
 	}
 
 	ret = pwm_fan_of_get_cooling_data(&pdev->dev, ctx);
@@ -282,14 +260,20 @@ static int pwm_fan_probe(struct platform_device *pdev)
 		if (IS_ERR(cdev)) {
 			dev_err(&pdev->dev,
 				"Failed to register pwm-fan as cooling device");
-			pwm_disable(ctx->pwm);
-			return PTR_ERR(cdev);
+			ret = PTR_ERR(cdev);
+			goto err_pwm_disable;
 		}
 		ctx->cdev = cdev;
 		thermal_cdev_update(cdev);
 	}
 
 	return 0;
+
+err_pwm_disable:
+	state.enabled = false;
+	pwm_apply_state(ctx->pwm, &state);
+
+	return ret;
 }
 
 static int pwm_fan_remove(struct platform_device *pdev)

drivers/hwmon/scpi-hwmon.c

@@ -16,6 +16,7 @@
 
 #include <linux/hwmon.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/scpi_protocol.h>
 #include <linux/slab.h>
@@ -23,6 +24,7 @@
 #include <linux/thermal.h>
 
 struct sensor_data {
+	unsigned int scale;
 	struct scpi_sensor_info info;
 	struct device_attribute dev_attr_input;
 	struct device_attribute dev_attr_label;
@@ -44,6 +46,30 @@ struct scpi_sensors {
 	const struct attribute_group *groups[2];
 };
 
+static const u32 gxbb_scpi_scale[] = {
+	[TEMPERATURE]	= 1,		/* (celsius)		*/
+	[VOLTAGE]	= 1000,		/* (millivolts)		*/
+	[CURRENT]	= 1000,		/* (milliamperes)	*/
+	[POWER]		= 1000000,	/* (microwatts)		*/
+	[ENERGY]	= 1000000,	/* (microjoules)	*/
+};
+
+static const u32 scpi_scale[] = {
+	[TEMPERATURE]	= 1000,		/* (millicelsius)	*/
+	[VOLTAGE]	= 1000,		/* (millivolts)		*/
+	[CURRENT]	= 1000,		/* (milliamperes)	*/
+	[POWER]		= 1000000,	/* (microwatts)		*/
+	[ENERGY]	= 1000000,	/* (microjoules)	*/
+};
+
+static void scpi_scale_reading(u64 *value, struct sensor_data *sensor)
+{
+	if (scpi_scale[sensor->info.class] != sensor->scale) {
+		*value *= scpi_scale[sensor->info.class];
+		do_div(*value, sensor->scale);
+	}
+}
+
 static int scpi_read_temp(void *dev, int *temp)
 {
 	struct scpi_thermal_zone *zone = dev;
@@ -57,6 +83,8 @@ static int scpi_read_temp(void *dev, int *temp)
 	if (ret)
 		return ret;
 
+	scpi_scale_reading(&value, sensor);
+
 	*temp = value;
 	return 0;
 }
@@ -77,6 +105,8 @@ scpi_show_sensor(struct device *dev, struct device_attribute *attr, char *buf)
 	if (ret)
 		return ret;
 
+	scpi_scale_reading(&value, sensor);
+
 	return sprintf(buf, "%llu\n", value);
 }
 
@@ -94,14 +124,23 @@ static struct thermal_zone_of_device_ops scpi_sensor_ops = {
 	.get_temp = scpi_read_temp,
 };
 
+static const struct of_device_id scpi_of_match[] = {
+	{.compatible = "arm,scpi-sensors", .data = &scpi_scale},
+	{.compatible = "amlogic,meson-gxbb-scpi-sensors", .data = &gxbb_scpi_scale},
+	{},
+};
+MODULE_DEVICE_TABLE(of, scpi_of_match);
+
 static int scpi_hwmon_probe(struct platform_device *pdev)
 {
 	u16 nr_sensors, i;
+	const u32 *scale;
 	int num_temp = 0, num_volt = 0, num_current = 0, num_power = 0;
 	int num_energy = 0;
 	struct scpi_ops *scpi_ops;
 	struct device *hwdev, *dev = &pdev->dev;
 	struct scpi_sensors *scpi_sensors;
+	const struct of_device_id *of_id;
 	int idx, ret;
 
 	scpi_ops = get_scpi_ops();
@@ -131,6 +170,13 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
 
 	scpi_sensors->scpi_ops = scpi_ops;
 
+	of_id = of_match_device(scpi_of_match, &pdev->dev);
+	if (!of_id) {
+		dev_err(&pdev->dev, "Unable to initialize scpi-hwmon data\n");
+		return -ENODEV;
+	}
+	scale = of_id->data;
+
 	for (i = 0, idx = 0; i < nr_sensors; i++) {
 		struct sensor_data *sensor = &scpi_sensors->data[idx];
 
@@ -178,6 +224,8 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
 			continue;
 		}
 
+		sensor->scale = scale[sensor->info.class];
+
 		sensor->dev_attr_input.attr.mode = S_IRUGO;
 		sensor->dev_attr_input.show = scpi_show_sensor;
 		sensor->dev_attr_input.attr.name = sensor->input;
@@ -247,12 +295,6 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id scpi_of_match[] = {
-	{.compatible = "arm,scpi-sensors"},
-	{},
-};
-MODULE_DEVICE_TABLE(of, scpi_of_match);
-
 static struct platform_driver scpi_hwmon_platdrv = {
 	.driver = {
 		.name	= "scpi-hwmon",

drivers/iio/adc/ti-ads1015.c

@@ -23,7 +23,7 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 
-#include <linux/i2c/ads1015.h>
+#include <linux/platform_data/ads1015.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/types.h>