net: bgmac: support Ethernet core on BCM53573 SoCs

BCM53573 is a new series of Broadcom's SoCs. It's based on ARM and can
be found in two packages (versions): BCM53573 and BCM47189. It shares
some code with the Northstar family, but also requires some new quirks.

First of all there can be up to 2 Ethernet cores on this SoC. If that is
the case, they are connected to two different switch ports allowing some
more complex/optimized setups. It seems the second unit doesn't come
fully configured and requires some IRQ quirk.

Other than that only the first core is connected to the PHY. For the
second one we have to register fixed PHY (similarly to the Northstar),
otherwise generic PHY driver would get some invalid info.

This has been successfully tested on Tenda AC9 (BCM47189B0).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bgmac-bcma.c

@@ -92,6 +92,7 @@ MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl);
 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */
 static int bgmac_probe(struct bcma_device *core)
 {
+	struct bcma_chipinfo *ci = &core->bus->chipinfo;
 	struct ssb_sprom *sprom = &core->bus->sprom;
 	struct mii_bus *mii_bus;
 	struct bgmac *bgmac;
@@ -157,7 +158,8 @@ static int bgmac_probe(struct bcma_device *core)
 	dev_info(bgmac->dev, "Found PHY addr: %d%s\n", bgmac->phyaddr,
 		 bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : "");
 
-	if (!bgmac_is_bcm4707_family(core)) {
+	if (!bgmac_is_bcm4707_family(core) &&
+	    !(ci->id == BCMA_CHIP_ID_BCM53573 && core->core_unit == 1)) {
 		mii_bus = bcma_mdio_mii_register(core, bgmac->phyaddr);
 		if (!IS_ERR(mii_bus)) {
 			err = PTR_ERR(mii_bus);
@@ -230,6 +232,21 @@ static int bgmac_probe(struct bcma_device *core)
 		bgmac->feature_flags |= BGMAC_FEAT_NO_RESET;
 		bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500;
 		break;
+	case BCMA_CHIP_ID_BCM53573:
+		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
+		bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
+		if (ci->pkg == BCMA_PKG_ID_BCM47189)
+			bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED;
+		if (core->core_unit == 0) {
+			bgmac->feature_flags |= BGMAC_FEAT_CC4_IF_SW_TYPE;
+			if (ci->pkg == BCMA_PKG_ID_BCM47189)
+				bgmac->feature_flags |=
+					BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII;
+		} else if (core->core_unit == 1) {
+			bgmac->feature_flags |= BGMAC_FEAT_IRQ_ID_OOB_6;
+			bgmac->feature_flags |= BGMAC_FEAT_CC7_IF_TYPE_RGMII;
+		}
+		break;
 	default:
 		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
 		bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;

drivers/net/ethernet/broadcom/bgmac.c

@@ -940,6 +940,27 @@ static void bgmac_chip_reset(struct bgmac *bgmac)
 		bgmac_cco_ctl_maskset(bgmac, 1, ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK |
 						  BGMAC_CHIPCTL_1_SW_TYPE_MASK),
 				      sw_type);
+	} else if (bgmac->feature_flags & BGMAC_FEAT_CC4_IF_SW_TYPE) {
+		u32 sw_type = BGMAC_CHIPCTL_4_IF_TYPE_MII |
+			      BGMAC_CHIPCTL_4_SW_TYPE_EPHY;
+		u8 et_swtype = 0;
+		char buf[4];
+
+		if (bcm47xx_nvram_getenv("et_swtype", buf, sizeof(buf)) > 0) {
+			if (kstrtou8(buf, 0, &et_swtype))
+				dev_err(bgmac->dev, "Failed to parse et_swtype (%s)\n",
+					buf);
+			sw_type = (et_swtype & 0x0f) << 12;
+		} else if (bgmac->feature_flags & BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII) {
+			sw_type = BGMAC_CHIPCTL_4_IF_TYPE_RGMII |
+				  BGMAC_CHIPCTL_4_SW_TYPE_RGMII;
+		}
+		bgmac_cco_ctl_maskset(bgmac, 4, ~(BGMAC_CHIPCTL_4_IF_TYPE_MASK |
+						  BGMAC_CHIPCTL_4_SW_TYPE_MASK),
+				      sw_type);
+	} else if (bgmac->feature_flags & BGMAC_FEAT_CC7_IF_TYPE_RGMII) {
+		bgmac_cco_ctl_maskset(bgmac, 7, ~BGMAC_CHIPCTL_7_IF_TYPE_MASK,
+				      BGMAC_CHIPCTL_7_IF_TYPE_RGMII);
 	}
 
 	if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw)
@@ -1467,6 +1488,10 @@ int bgmac_enet_probe(struct bgmac *info)
 	 */
 	bgmac_clk_enable(bgmac, 0);
 
+	/* This seems to be fixing IRQ by assigning OOB #6 to the core */
+	if (bgmac->feature_flags & BGMAC_FEAT_IRQ_ID_OOB_6)
+		bgmac_idm_write(bgmac, BCMA_OOB_SEL_OUT_A30, 0x86);
+
 	bgmac_chip_reset(bgmac);
 
 	err = bgmac_dma_alloc(bgmac);

drivers/net/ethernet/broadcom/bgmac.h

@@ -369,6 +369,21 @@
 #define BGMAC_CHIPCTL_1_SW_TYPE_RGMII		0x000000C0
 #define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS		0x00010000
 
+#define BGMAC_CHIPCTL_4_IF_TYPE_MASK		0x00003000
+#define BGMAC_CHIPCTL_4_IF_TYPE_RMII		0x00000000
+#define BGMAC_CHIPCTL_4_IF_TYPE_MII		0x00001000
+#define BGMAC_CHIPCTL_4_IF_TYPE_RGMII		0x00002000
+#define BGMAC_CHIPCTL_4_SW_TYPE_MASK		0x0000C000
+#define BGMAC_CHIPCTL_4_SW_TYPE_EPHY		0x00000000
+#define BGMAC_CHIPCTL_4_SW_TYPE_EPHYMII		0x00004000
+#define BGMAC_CHIPCTL_4_SW_TYPE_EPHYRMII	0x00008000
+#define BGMAC_CHIPCTL_4_SW_TYPE_RGMII		0x0000C000
+
+#define BGMAC_CHIPCTL_7_IF_TYPE_MASK		0x000000C0
+#define BGMAC_CHIPCTL_7_IF_TYPE_RMII		0x00000000
+#define BGMAC_CHIPCTL_7_IF_TYPE_MII		0x00000040
+#define BGMAC_CHIPCTL_7_IF_TYPE_RGMII		0x00000080
+
 #define BGMAC_WEIGHT	64
 
 #define ETHER_MAX_LEN   1518
@@ -390,6 +405,10 @@
 #define BGMAC_FEAT_NO_CLR_MIB		BIT(13)
 #define BGMAC_FEAT_FORCE_SPEED_2500	BIT(14)
 #define BGMAC_FEAT_CMDCFG_SR_REV4	BIT(15)
+#define BGMAC_FEAT_IRQ_ID_OOB_6		BIT(16)
+#define BGMAC_FEAT_CC4_IF_SW_TYPE	BIT(17)
+#define BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII	BIT(18)
+#define BGMAC_FEAT_CC7_IF_TYPE_RGMII	BIT(19)
 
 struct bgmac_slot_info {
 	union {

include/linux/bcma/bcma.h

@@ -205,6 +205,9 @@ struct bcma_host_ops {
 #define  BCMA_PKG_ID_BCM4709	0
 #define BCMA_CHIP_ID_BCM47094	53030
 #define BCMA_CHIP_ID_BCM53018	53018
+#define BCMA_CHIP_ID_BCM53573	53573
+#define  BCMA_PKG_ID_BCM53573	0
+#define  BCMA_PKG_ID_BCM47189	1
 
 /* Board types (on PCI usually equals to the subsystem dev id) */
 /* BCM4313 */

include/linux/bcma/bcma_regs.h

@@ -23,6 +23,7 @@
 #define  BCMA_CLKCTLST_4328A0_HAVEALP	0x00020000 /* 4328a0 has reversed bits */
 
 /* Agent registers (common for every core) */
+#define BCMA_OOB_SEL_OUT_A30		0x0100
 #define BCMA_IOCTL			0x0408 /* IO control */
 #define  BCMA_IOCTL_CLK			0x0001
 #define  BCMA_IOCTL_FGC			0x0002