Merge tag 'exynos-cpuidle' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

Merge "Samsung exynos-cpuidle updates for v3.16" from Kukjin Kim:

- From Daniel Lezcano:
 This patchset relies on the cpm_pm notifier to initiate the
 powerdown sequence operations from pm.c instead cpuidle.c.
 Thus the cpuidle driver is no longer dependent from arch
 specific code as everything is called from the pm.c file.

* tag 'exynos-cpuidle' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (94 commits)
  ARM: EXYNOS: Fix kernel panic when unplugging CPU1 on exynos
  ARM: EXYNOS: Move the driver to drivers/cpuidle directory
  ARM: EXYNOS: Cleanup all unneeded headers from cpuidle.c
  ARM: EXYNOS: Pass the AFTR callback to the platform_data
  ARM: EXYNOS: Move S5P_CHECK_SLEEP into pm.c
  ARM: EXYNOS: Move the power sequence call in the cpu_pm notifier
  ARM: EXYNOS: Move the AFTR state function into pm.c
  ARM: EXYNOS: Encapsulate the AFTR code into a function
  ARM: EXYNOS: Disable cpuidle for exynos5440
  ARM: EXYNOS: Encapsulate boot vector code into a function for cpuidle
  ARM: EXYNOS: Pass wakeup mask parameter to function for cpuidle
  ARM: EXYNOS: Remove ifdef for scu_enable in pm
  ARM: EXYNOS: Move scu_enable in the cpu_pm notifier
  ARM: EXYNOS: Use the cpu_pm notifier for pm
  ARM: EXYNOS: Fix S5P_WAKEUP_STAT call for cpuidle
  ARM: EXYNOS: Move some code inside the idle_finisher for cpuidle
  ARM: EXYNOS: Encapsulate register access inside a function for pm
  ARM: EXYNOS: Change function name prefix for cpuidle
  ARM: EXYNOS: Use cpuidle_register
  ARM: EXYNOS: Prevent forward declaration for cpuidle
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt

@@ -0,0 +1,38 @@
+Samsung Exynos SYSRAM for SMP bringup:
+------------------------------------
+
+Samsung SMP-capable Exynos SoCs use part of the SYSRAM for the bringup
+of the secondary cores. Once the core gets powered up it executes the
+code that is residing at some specific location of the SYSRAM.
+
+Therefore reserved section sub-nodes have to be added to the mmio-sram
+declaration. These nodes are of two types depending upon secure or
+non-secure execution environment.
+
+Required sub-node properties:
+- compatible : depending upon boot mode, should be
+		"samsung,exynos4210-sysram" : for Secure SYSRAM
+		"samsung,exynos4210-sysram-ns" : for Non-secure SYSRAM
+
+The rest of the properties should follow the generic mmio-sram discription
+found in ../../misc/sysram.txt
+
+Example:
+
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x54000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x54000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@53000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x53000 0x1000>;
+		};
+	};

Documentation/devicetree/bindings/clock/exynos3250-clock.txt

@@ -0,0 +1,41 @@
+* Samsung Exynos3250 Clock Controller
+
+The Exynos3250 clock controller generates and supplies clock to various
+controllers within the Exynos3250 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos3250.h header and can be used in device
+tree sources.
+
+Example 1: An example of a clock controller node is listed below.
+
+	cmu: clock-controller@10030000 {
+		compatible = "samsung,exynos3250-cmu";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the clock
+	   controller. Refer to the standard clock bindings for information
+	   about 'clocks' and 'clock-names' property.
+
+	serial@13800000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13800000 0x100>;
+		interrupts = <0 109 0>;
+		clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
+		clock-names = "uart", "clk_uart_baud0";
+	};

Documentation/devicetree/bindings/clock/exynos5260-clock.txt

@@ -0,0 +1,190 @@
+* Samsung Exynos5260 Clock Controller
+
+Exynos5260 has 13 clock controllers which are instantiated
+independently from the device-tree. These clock controllers
+generate and supply clocks to various hardware blocks within
+the SoC.
+
+Each clock is assigned an identifier and client nodes can use
+this identifier to specify the clock which they consume. All
+available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5260-clk.h header and can be used in
+device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It
+is expected that they are defined using standard clock bindings
+with following clock-output-names:
+
+ - "fin_pll" - PLL input clock from XXTI
+ - "xrtcxti" - input clock from XRTCXTI
+ - "ioclk_pcm_extclk" - pcm external operation clock
+ - "ioclk_spdif_extclk" - spdif external operation clock
+ - "ioclk_i2s_cdclk" - i2s0 codec clock
+
+Phy clocks:
+
+There are several clocks which are generated by specific PHYs.
+These clocks are fed into the clock controller and then routed to
+the hardware blocks. These clocks are defined as fixed clocks in the
+driver with following names:
+
+ - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
+ - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
+ - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
+ - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
+ - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
+ - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
+ - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
+ - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
+ - "phyclk_dptx_phy_clk_div2"
+ - "phyclk_mipi_dphy_4l_m_rxclkesc0"
+ - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
+ - "phyclk_usbhost20_phy_freeclk"
+ - "phyclk_usbhost20_phy_clk48mohci"
+ - "phyclk_usbdrd30_udrd30_pipe_pclk"
+ - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
+
+Required Properties for Clock Controller:
+
+ - compatible: should be one of the following.
+	1) "samsung,exynos5260-clock-top"
+	2) "samsung,exynos5260-clock-peri"
+	3) "samsung,exynos5260-clock-egl"
+	4) "samsung,exynos5260-clock-kfc"
+	5) "samsung,exynos5260-clock-g2d"
+	6) "samsung,exynos5260-clock-mif"
+	7) "samsung,exynos5260-clock-mfc"
+	8) "samsung,exynos5260-clock-g3d"
+	9) "samsung,exynos5260-clock-fsys"
+	10) "samsung,exynos5260-clock-aud"
+	11) "samsung,exynos5260-clock-isp"
+	12) "samsung,exynos5260-clock-gscl"
+	13) "samsung,exynos5260-clock-disp"
+
+ - reg: physical base address of the controller and the length of
+	memory mapped region.
+
+ - #clock-cells: should be 1.
+
+ - clocks: list of clock identifiers which are fed as the input to
+	the given clock controller. Please refer the next section to find
+	the input clocks for a given controller.
+
+ - clock-names: list of names of clocks which are fed as the input
+	to the given clock controller.
+
+Input clocks for top clock controller:
+	- fin_pll
+	- dout_mem_pll
+	- dout_bus_pll
+	- dout_media_pll
+
+Input clocks for peri clock controller:
+	- fin_pll
+	- ioclk_pcm_extclk
+	- ioclk_i2s_cdclk
+	- ioclk_spdif_extclk
+	- phyclk_hdmi_phy_ref_cko
+	- dout_aclk_peri_66
+	- dout_sclk_peri_uart0
+	- dout_sclk_peri_uart1
+	- dout_sclk_peri_uart2
+	- dout_sclk_peri_spi0_b
+	- dout_sclk_peri_spi1_b
+	- dout_sclk_peri_spi2_b
+	- dout_aclk_peri_aud
+	- dout_sclk_peri_spi0_b
+
+Input clocks for egl clock controller:
+	- fin_pll
+	- dout_bus_pll
+
+Input clocks for kfc clock controller:
+	- fin_pll
+	- dout_media_pll
+
+Input clocks for g2d clock controller:
+	- fin_pll
+	- dout_aclk_g2d_333
+
+Input clocks for mif clock controller:
+	- fin_pll
+
+Input clocks for mfc clock controller:
+	- fin_pll
+	- dout_aclk_mfc_333
+
+Input clocks for g3d clock controller:
+	- fin_pll
+
+Input clocks for fsys clock controller:
+	- fin_pll
+	- phyclk_usbhost20_phy_phyclock
+	- phyclk_usbhost20_phy_freeclk
+	- phyclk_usbhost20_phy_clk48mohci
+	- phyclk_usbdrd30_udrd30_pipe_pclk
+	- phyclk_usbdrd30_udrd30_phyclock
+	- dout_aclk_fsys_200
+
+Input clocks for aud clock controller:
+	- fin_pll
+	- fout_aud_pll
+	- ioclk_i2s_cdclk
+	- ioclk_pcm_extclk
+
+Input clocks for isp clock controller:
+	- fin_pll
+	- dout_aclk_isp1_266
+	- dout_aclk_isp1_400
+	- mout_aclk_isp1_266
+
+Input clocks for gscl clock controller:
+	- fin_pll
+	- dout_aclk_gscl_400
+	- dout_aclk_gscl_333
+
+Input clocks for disp clock controller:
+	- fin_pll
+	- phyclk_dptx_phy_ch3_txd_clk
+	- phyclk_dptx_phy_ch2_txd_clk
+	- phyclk_dptx_phy_ch1_txd_clk
+	- phyclk_dptx_phy_ch0_txd_clk
+	- phyclk_hdmi_phy_tmds_clko
+	- phyclk_hdmi_phy_ref_clko
+	- phyclk_hdmi_phy_pixel_clko
+	- phyclk_hdmi_link_o_tmds_clkhi
+	- phyclk_mipi_dphy_4l_m_txbyte_clkhs
+	- phyclk_dptx_phy_o_ref_clk_24m
+	- phyclk_dptx_phy_clk_div2
+	- phyclk_mipi_dphy_4l_m_rxclkesc0
+	- phyclk_hdmi_phy_ref_cko
+	- ioclk_spdif_extclk
+	- dout_aclk_peri_aud
+	- dout_aclk_disp_222
+	- dout_sclk_disp_pixel
+	- dout_aclk_disp_333
+
+Example 1: An example of a clock controller node is listed below.
+
+	clock_mfc: clock-controller@11090000 {
+		compatible = "samsung,exynos5260-clock-mfc";
+		clock = <&fin_pll>, <&clock_top TOP_DOUT_ACLK_MFC_333>;
+		clock-names = "fin_pll", "dout_aclk_mfc_333";
+		reg = <0x11090000 0x10000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the
+		peri clock controller. Refer to the standard clock bindings for
+		information about 'clocks' and 'clock-names' property.
+
+	serial@12C00000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C00000 0x100>;
+		interrupts = <0 146 0>;
+		clocks = <&clock_peri PERI_PCLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+

Documentation/devicetree/bindings/clock/exynos5420-clock.txt

@@ -1,12 +1,13 @@
 * Samsung Exynos5420 Clock Controller
 
 The Exynos5420 clock controller generates and supplies clock to various
-controllers within the Exynos5420 SoC.
+controllers within the Exynos5420 SoC and for the Exynos5800 SoC.
 
 Required Properties:
 
 - compatible: should be one of the following.
   - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
+  - "samsung,exynos5800-clock" - controller compatible with Exynos5800 SoC.
 
 - reg: physical base address of the controller and length of memory mapped
   region.

Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt

@@ -0,0 +1,50 @@
+* Samsung S3C2410 Clock Controller
+
+The S3C2410 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to the s3c2410,
+s3c2440 and s3c2442 SoCs in the s3c24x family.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC.
+  - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC.
+  - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC.
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2410.h header and can be used in device
+tree sources.
+
+External clocks:
+
+The xti clock used as input for the plls is generated outside the SoC. It is
+expected that is are defined using standard clock bindings with a
+clock-output-names value of "xti".
+
+Example: Clock controller node:
+
+	clocks: clock-controller@4c000000 {
+		compatible = "samsung,s3c2410-clock";
+		reg = <0x4c000000 0x20>;
+		#clock-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	serial@50004000 {
+		compatible = "samsung,s3c2440-uart";
+		reg = <0x50004000 0x4000>;
+		interrupts = <1 23 3 4>, <1 23 4 4>;
+		clock-names = "uart", "clk_uart_baud2";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>;
+		status = "disabled";
+	};

Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt

@@ -0,0 +1,50 @@
+* Samsung S3C2412 Clock Controller
+
+The S3C2412 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to the s3c2412
+and s3c2413 SoCs in the s3c24x family.
+
+Required Properties:
+
+- compatible: should be "samsung,s3c2412-clock"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2412.h header and can be used in device
+tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xti" - crystal input - required,
+ - "ext" - external clock source - optional,
+
+Example: Clock controller node:
+
+	clocks: clock-controller@4c000000 {
+		compatible = "samsung,s3c2412-clock";
+		reg = <0x4c000000 0x20>;
+		#clock-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	serial@50004000 {
+		compatible = "samsung,s3c2412-uart";
+		reg = <0x50004000 0x4000>;
+		interrupts = <1 23 3 4>, <1 23 4 4>;
+		clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+			 <&clocks SCLK_UART>;
+		status = "disabled";
+	};

Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt

@@ -0,0 +1,56 @@
+* Samsung S3C2443 Clock Controller
+
+The S3C2443 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to all SoCs in
+the s3c24x family starting with the s3c2443.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC.
+  - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC.
+  - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC.
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2443.h header and can be used in device
+tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xti" - crystal input - required,
+ - "ext" - external clock source - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_uart" - external uart clock - optional,
+
+Example: Clock controller node:
+
+	clocks: clock-controller@4c000000 {
+		compatible = "samsung,s3c2416-clock";
+		reg = <0x4c000000 0x40>;
+		#clock-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	serial@50004000 {
+		compatible = "samsung,s3c2440-uart";
+		reg = <0x50004000 0x4000>;
+		interrupts = <1 23 3 4>, <1 23 4 4>;
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+				<&clocks SCLK_UART>;
+		status = "disabled";
+	};

arch/arm/Kconfig

@@ -755,7 +755,7 @@ config ARCH_S3C64XX
 	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
-	select COMMON_CLK
+	select COMMON_CLK_SAMSUNG
 	select CPU_V6K
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
@@ -836,7 +836,7 @@ config ARCH_EXYNOS
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SPARSEMEM_ENABLE
 	select ARM_GIC
-	select COMMON_CLK
+	select COMMON_CLK_SAMSUNG
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_S3C2410_I2C if I2C
@@ -844,6 +844,7 @@ config ARCH_EXYNOS
 	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
+	select SRAM
 	select USE_OF
 	help
 	  Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)

arch/arm/boot/dts/Makefile

@@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
 	exynos5420-arndale-octa.dtb \
+	exynos5420-peach-pit.dtb \
 	exynos5420-smdk5420.dtb \
 	exynos5440-sd5v1.dtb \
 	exynos5440-ssdk5440.dtb

arch/arm/boot/dts/exynos4.dtsi

@@ -129,12 +129,10 @@
 		status = "disabled";
 		#address-cells = <1>;
 		#size-cells = <1>;
+		#clock-cells = <1>;
+		clock-output-names = "cam_a_clkout", "cam_b_clkout";
 		ranges;
 
-		clock_cam: clock-controller {
-			 #clock-cells = <1>;
-		};
-
 		fimc_0: fimc@11800000 {
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11800000 0x1000>;
@@ -371,6 +369,8 @@
 		interrupts = <0 60 0>;
 		clocks = <&clock CLK_I2C2>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_bus>;
 		status = "disabled";
 	};
 
@@ -382,6 +382,8 @@
 		interrupts = <0 61 0>;
 		clocks = <&clock CLK_I2C3>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_bus>;
 		status = "disabled";
 	};
 
@@ -393,6 +395,8 @@
 		interrupts = <0 62 0>;
 		clocks = <&clock CLK_I2C4>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_bus>;
 		status = "disabled";
 	};
 
@@ -404,6 +408,8 @@
 		interrupts = <0 63 0>;
 		clocks = <&clock CLK_I2C5>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_bus>;
 		status = "disabled";
 	};
 
@@ -415,6 +421,8 @@
 		interrupts = <0 64 0>;
 		clocks = <&clock CLK_I2C6>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_bus>;
 		status = "disabled";
 	};
 
@@ -426,6 +434,8 @@
 		interrupts = <0 65 0>;
 		clocks = <&clock CLK_I2C7>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c7_bus>;
 		status = "disabled";
 	};
 

arch/arm/boot/dts/exynos4210-universal_c210.dts

@@ -28,6 +28,21 @@
 		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
 	};
 
+	sysram@02020000 {
+		smp-sysram@0 {
+			status = "disabled";
+		};
+
+		smp-sysram@5000 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x5000 0x1000>;
+		};
+
+		smp-sysram@1f000 {
+			status = "disabled";
+		};
+	};
+
 	mct@10050000 {
 		compatible = "none";
 	};

arch/arm/boot/dts/exynos4210.dtsi

@@ -31,6 +31,24 @@
 		pinctrl2 = &pinctrl_2;
 	};
 
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x20000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@1f000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x1f000 0x1000>;
+		};
+	};
+
 	pd_lcd1: lcd1-power-domain@10023CA0 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023CA0 0x20>;

arch/arm/boot/dts/exynos4412-trats2.dts

@@ -20,7 +20,7 @@
 	compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
 
 	aliases {
-		i2c8 = &i2c_ak8975;
+		i2c9 = &i2c_ak8975;
 	};
 
 	memory {
@@ -80,7 +80,24 @@
 			enable-active-high;
 		};
 
-		/* More to come */
+		cam_af_reg: voltage-regulator-3 {
+			compatible = "regulator-fixed";
+			regulator-name = "CAM_AF";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpm0 4 0>;
+			enable-active-high;
+		};
+
+		cam_isp_core_reg: voltage-regulator-4 {
+			compatible = "regulator-fixed";
+			regulator-name = "CAM_ISP_CORE_1.2V_EN";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&gpm0 3 0>;
+			enable-active-high;
+			regulator-always-on;
+		};
 	};
 
 	gpio-keys {
@@ -140,6 +157,38 @@
 		};
 	};
 
+	i2c_0: i2c@13860000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <400000>;
+		pinctrl-0 = <&i2c0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		s5c73m3@3c {
+			compatible = "samsung,s5c73m3";
+			reg = <0x3c>;
+			standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
+			xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
+			vdd-int-supply = <&buck9_reg>;
+			vddio-cis-supply = <&ldo9_reg>;
+			vdda-supply = <&ldo17_reg>;
+			vddio-host-supply = <&ldo18_reg>;
+			vdd-af-supply = <&cam_af_reg>;
+			vdd-reg-supply = <&cam_io_reg>;
+			clock-frequency = <24000000>;
+			/* CAM_A_CLKOUT */
+			clocks = <&camera 0>;
+			clock-names = "cis_extclk";
+			port {
+				s5c73m3_ep: endpoint {
+					remote-endpoint = <&csis0_ep>;
+					data-lanes = <1 2 3 4>;
+				};
+			};
+		};
+	};
+
 	i2c@138D0000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-slave-addr = <0x10>;
@@ -586,8 +635,8 @@
 		status = "okay";
 	};
 
-	camera {
-		pinctrl-0 = <&cam_port_b_clk_active>;
+	camera: camera {
+		pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 		pinctrl-names = "default";
 		status = "okay";
 
@@ -607,6 +656,23 @@
 			status = "okay";
 		};
 
+		csis_0: csis@11880000 {
+			status = "okay";
+			vddcore-supply = <&ldo8_reg>;
+			vddio-supply = <&ldo10_reg>;
+			clock-frequency = <176000000>;
+
+			/* Camera C (3) MIPI CSI-2 (CSIS0) */
+			port@3 {
+				reg = <3>;
+				csis0_ep: endpoint {
+					remote-endpoint = <&s5c73m3_ep>;
+					data-lanes = <1 2 3 4>;
+					samsung,csis-hs-settle = <12>;
+				};
+			};
+		};
+
 		csis_1: csis@11890000 {
 			vddcore-supply = <&ldo8_reg>;
 			vddio-supply = <&ldo10_reg>;
@@ -647,10 +713,11 @@
 					reg = <0x10>;
 					svdda-supply = <&cam_io_reg>;
 					svddio-supply = <&ldo19_reg>;
+					afvdd-supply = <&ldo19_reg>;
 					clock-frequency = <24000000>;
 					/* CAM_B_CLKOUT */
-					clocks = <&clock_cam 1>;
-					clock-names = "mclk";
+					clocks = <&camera 1>;
+					clock-names = "extclk";
 					samsung,camclk-out = <1>;
 					gpios = <&gpm1 6 0>;
 

arch/arm/boot/dts/exynos4x12.dtsi

@@ -37,6 +37,24 @@
 		interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
 	};
 
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x40000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@2f000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x2f000 0x1000>;
+		};
+	};
+
 	pd_isp: isp-power-domain@10023CA0 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023CA0 0x20>;

arch/arm/boot/dts/exynos5250.dtsi

@@ -72,6 +72,24 @@
 		};
 	};
 
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x30000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x30000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@2f000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x2f000 0x1000>;
+		};
+	};
+
 	pd_gsc: gsc-power-domain@10044000 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044000 0x20>;

arch/arm/boot/dts/exynos5420-peach-pit.dts

@@ -0,0 +1,147 @@
+/*
+ * Google Peach Pit Rev 6+ board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos5420.dtsi"
+
+/ {
+	model = "Google Peach Pit Rev 6+";
+
+	compatible = "google,pit-rev16",
+		"google,pit-rev15", "google,pit-rev14",
+		"google,pit-rev13", "google,pit-rev12",
+		"google,pit-rev11", "google,pit-rev10",
+		"google,pit-rev9", "google,pit-rev8",
+		"google,pit-rev7", "google,pit-rev6",
+		"google,pit", "google,peach","samsung,exynos5420",
+		"samsung,exynos5";
+
+	memory {
+		reg = <0x20000000 0x80000000>;
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+	};
+};
+
+&pinctrl_0 {
+	tpm_irq: tpm-irq {
+		samsung,pins = "gpx1-0";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&uart_3 {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	caps2-mmc-hs200-1_8v;
+	supports-highspeed;
+	non-removable;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&hsi2c_9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+
+		/* Unused irq; but still need to configure the pins */
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpm_irq>;
+	};
+};
+
+/*
+ * Use longest HW watchdog in SoC (32 seconds) since the hardware
+ * watchdog provides no debugging information (compared to soft/hard
+ * lockup detectors) and so should be last resort.
+ */
+&watchdog {
+	timeout-sec = <32>;
+};

arch/arm/boot/dts/exynos5420-pinctrl.dtsi

@@ -624,6 +624,34 @@
 			samsung,pin-drv = <0>;
 		};
 
+		pwm0_out: pwm0-out {
+			samsung,pins = "gpb2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm1_out: pwm1-out {
+			samsung,pins = "gpb2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm2_out: pwm2-out {
+			samsung,pins = "gpb2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm3_out: pwm3-out {
+			samsung,pins = "gpb2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
 		i2c7_hs_bus: i2c7-hs-bus {
 			samsung,pins = "gpb2-2", "gpb2-3";
 			samsung,pin-function = <3>;

arch/arm/boot/dts/exynos5420.dtsi

@@ -58,6 +58,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
 			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu1: cpu@1 {
@@ -65,6 +66,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
 			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu2: cpu@2 {
@@ -72,6 +74,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <0x2>;
 			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu3: cpu@3 {
@@ -79,6 +82,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <0x3>;
 			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu4: cpu@100 {
@@ -86,6 +90,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x100>;
 			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
 		};
 
 		cpu5: cpu@101 {
@@ -93,6 +98,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x101>;
 			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
 		};
 
 		cpu6: cpu@102 {
@@ -100,6 +106,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
 			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
 		};
 
 		cpu7: cpu@103 {
@@ -107,6 +114,44 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x103>;
 			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+		};
+	};
+
+	cci@10d20000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x10d20000 0x1000>;
+		ranges = <0x0 0x10d20000 0x6000>;
+
+		cci_control0: slave-if@4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+		cci_control1: slave-if@5000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+	};
+
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x54000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x54000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@53000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x53000 0x1000>;
 		};
 	};
 
@@ -125,7 +170,7 @@
 		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
 	};
 
-	codec@11000000 {
+	mfc: codec@11000000 {
 		compatible = "samsung,mfc-v7";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
@@ -169,7 +214,7 @@
 		status = "disabled";
 	};
 
-	mct@101C0000 {
+	mct: mct@101C0000 {
 		compatible = "samsung,exynos4210-mct";
 		reg = <0x101C0000 0x800>;
 		interrupt-controller;
@@ -270,7 +315,7 @@
 		interrupts = <0 47 0>;
 	};
 
-	rtc@101E0000 {
+	rtc: rtc@101E0000 {
 		clocks = <&clock CLK_RTC>;
 		clock-names = "rtc";
 		status = "disabled";
@@ -430,22 +475,22 @@
 		status = "disabled";
 	};
 
-	serial@12C00000 {
+	uart_0: serial@12C00000 {
 		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
-	serial@12C10000 {
+	uart_1: serial@12C10000 {
 		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
-	serial@12C20000 {
+	uart_2: serial@12C20000 {
 		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
-	serial@12C30000 {
+	uart_3: serial@12C30000 {
 		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
@@ -465,14 +510,14 @@
 		#phy-cells = <0>;
 	};
 
-	dp-controller@145B0000 {
+	dp: dp-controller@145B0000 {
 		clocks = <&clock CLK_DP1>;
 		clock-names = "dp";
 		phys = <&dp_phy>;
 		phy-names = "dp";
 	};
 
-	fimd@14400000 {
+	fimd: fimd@14400000 {
 		samsung,power-domain = <&disp_pd>;
 		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 		clock-names = "sclk_fimd", "fimd";
@@ -549,7 +594,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c4_hs_bus>;
-		clocks = <&clock CLK_I2C4>;
+		clocks = <&clock CLK_USI0>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -562,7 +607,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c5_hs_bus>;
-		clocks = <&clock CLK_I2C5>;
+		clocks = <&clock CLK_USI1>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -575,7 +620,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c6_hs_bus>;
-		clocks = <&clock CLK_I2C6>;
+		clocks = <&clock CLK_USI2>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -588,7 +633,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c7_hs_bus>;
-		clocks = <&clock CLK_I2C7>;
+		clocks = <&clock CLK_USI3>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -601,7 +646,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c8_hs_bus>;
-		clocks = <&clock CLK_I2C8>;
+		clocks = <&clock CLK_USI4>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -614,7 +659,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c9_hs_bus>;
-		clocks = <&clock CLK_I2C9>;
+		clocks = <&clock CLK_USI5>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -627,12 +672,12 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c10_hs_bus>;
-		clocks = <&clock CLK_I2C10>;
+		clocks = <&clock CLK_USI6>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
 
-	hdmi@14530000 {
+	hdmi: hdmi@14530000 {
 		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
@@ -644,7 +689,7 @@
 		status = "disabled";
 	};
 
-	mixer@14450000 {
+	mixer: mixer@14450000 {
 		compatible = "samsung,exynos5420-mixer";
 		reg = <0x14450000 0x10000>;
 		interrupts = <0 94 0>;
@@ -715,7 +760,7 @@
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
 	};
 
-        watchdog@101D0000 {
+        watchdog: watchdog@101D0000 {
 		compatible = "samsung,exynos5420-wdt";
 		reg = <0x101D0000 0x100>;
 		interrupts = <0 42 0>;
@@ -724,7 +769,7 @@
 		samsung,syscon-phandle = <&pmu_system_controller>;
         };
 
-	sss@10830000 {
+	sss: sss@10830000 {
 		compatible = "samsung,exynos4210-secss";
 		reg = <0x10830000 0x10000>;
 		interrupts = <0 112 0>;

arch/arm/boot/dts/s3c2416-smdk2416.dts

@@ -19,6 +19,19 @@
 		reg =  <0x30000000 0x4000000>;
 	};
 
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		xti: xti {
+			compatible = "fixed-clock";
+			clock-frequency = <12000000>;
+			clock-output-names = "xti";
+			#clock-cells = <0>;
+		};
+	};
+
 	serial@50000000 {
 		status = "okay";
 		pinctrl-names = "default";

arch/arm/boot/dts/s3c2416.dtsi

@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/clock/s3c2443.h>
 #include "s3c24xx.dtsi"
 #include "s3c2416-pinctrl.dtsi"
 
@@ -28,26 +29,53 @@
 		compatible = "samsung,s3c2416-irq";
 	};
 
+	clocks: clock-controller@0x4c000000 {
+		compatible = "samsung,s3c2416-clock";
+		reg = <0x4c000000 0x40>;
+		#clock-cells = <1>;
+	};
+
 	pinctrl@56000000 {
 		compatible = "samsung,s3c2416-pinctrl";
 	};
 
+	timer@51000000 {
+		clocks = <&clocks PCLK_PWM>;
+		clock-names = "timers";
+	};
+
 	serial@50000000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial@50004000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial@50008000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial@5000C000 {
 		compatible = "samsung,s3c2440-uart";
 		reg = <0x5000C000 0x4000>;
 		interrupts = <1 18 24 4>, <1 18 25 4>;
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
+				<&clocks SCLK_UART>;
 		status = "disabled";
 	};
 
@@ -55,6 +83,10 @@
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4AC00000 0x100>;
 		interrupts = <0 0 21 3>;
+		clock-names = "hsmmc", "mmc_busclk.0",
+				"mmc_busclk.2";
+		clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
+				<&clocks MUX_HSMMC0>;
 		status = "disabled";
 	};
 
@@ -62,18 +94,28 @@
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4A800000 0x100>;
 		interrupts = <0 0 20 3>;
+		clock-names = "hsmmc", "mmc_busclk.0",
+				"mmc_busclk.2";
+		clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
+				<&clocks MUX_HSMMC1>;
 		status = "disabled";
 	};
 
 	watchdog@53000000 {
 		interrupts = <1 9 27 3>;
+		clocks = <&clocks PCLK_WDT>;
+		clock-names = "watchdog";
 	};
 
 	rtc@57000000 {
 		compatible = "samsung,s3c2416-rtc";
+		clocks = <&clocks PCLK_RTC>;
+		clock-names = "rtc";
 	};
 
 	i2c@54000000 {
 		compatible = "samsung,s3c2440-i2c";
+		clocks = <&clocks PCLK_I2C0>;
+		clock-names = "i2c";
 	};
 };

arch/arm/mach-exynos/Kconfig

@@ -110,4 +110,12 @@ config SOC_EXYNOS5440
 
 endmenu
 
+config EXYNOS5420_MCPM
+	bool "Exynos5420 Multi-Cluster PM support"
+	depends on MCPM && SOC_EXYNOS5420
+	select ARM_CCI
+	help
+	  This is needed to provide CPU and cluster power management
+	  on Exynos5420 implementing big.LITTLE.
+
 endif

arch/arm/mach-exynos/Makefile

@@ -16,7 +16,6 @@ obj-$(CONFIG_ARCH_EXYNOS)	+= exynos.o
 
 obj-$(CONFIG_PM_SLEEP)		+= pm.o sleep.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
-obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 obj-$(CONFIG_ARCH_EXYNOS)	+= pmu.o
 
@@ -29,3 +28,5 @@ obj-$(CONFIG_ARCH_EXYNOS)	+= firmware.o
 
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_exynos-smc.o		:=-Wa,-march=armv7-a$(plus_sec)
+
+obj-$(CONFIG_EXYNOS5420_MCPM)	+= mcpm-exynos.o

arch/arm/mach-exynos/common.h

@@ -18,6 +18,8 @@
 void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
 
 struct map_desc;
+extern void __iomem *sysram_ns_base_addr;
+extern void __iomem *sysram_base_addr;
 void exynos_init_io(void);
 void exynos_restart(enum reboot_mode mode, const char *cmd);
 void exynos_cpuidle_init(void);
@@ -62,5 +64,12 @@ struct exynos_pmu_conf {
 };
 
 extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
+extern void exynos_cpu_power_down(int cpu);
+extern void exynos_cpu_power_up(int cpu);
+extern int  exynos_cpu_power_state(int cpu);
+extern void exynos_cluster_power_down(int cluster);
+extern void exynos_cluster_power_up(int cluster);
+extern int  exynos_cluster_power_state(int cluster);
+extern void exynos_enter_aftr(void);
 
 #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */

arch/arm/mach-exynos/cpuidle.c

@@ -1,256 +0,0 @@
-/* linux/arch/arm/mach-exynos4/cpuidle.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/cpuidle.h>
-#include <linux/cpu_pm.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/module.h>
-#include <linux/time.h>
-#include <linux/platform_device.h>
-
-#include <asm/proc-fns.h>
-#include <asm/smp_scu.h>
-#include <asm/suspend.h>
-#include <asm/unified.h>
-#include <asm/cpuidle.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include <mach/map.h>
-
-#include "common.h"
-#include "regs-pmu.h"
-
-#define REG_DIRECTGO_ADDR	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
-			S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
-			(S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
-#define REG_DIRECTGO_FLAG	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
-			S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
-			(S5P_VA_SYSRAM + 0x20) : S5P_INFORM1))
-
-#define S5P_CHECK_AFTR		0xFCBA0D10
-
-#define EXYNOS5_PWR_CTRL1			(S5P_VA_CMU + 0x01020)
-#define EXYNOS5_PWR_CTRL2			(S5P_VA_CMU + 0x01024)
-
-#define PWR_CTRL1_CORE2_DOWN_RATIO		(7 << 28)
-#define PWR_CTRL1_CORE1_DOWN_RATIO		(7 << 16)
-#define PWR_CTRL1_DIV2_DOWN_EN			(1 << 9)
-#define PWR_CTRL1_DIV1_DOWN_EN			(1 << 8)
-#define PWR_CTRL1_USE_CORE1_WFE			(1 << 5)
-#define PWR_CTRL1_USE_CORE0_WFE			(1 << 4)
-#define PWR_CTRL1_USE_CORE1_WFI			(1 << 1)
-#define PWR_CTRL1_USE_CORE0_WFI			(1 << 0)
-
-#define PWR_CTRL2_DIV2_UP_EN			(1 << 25)
-#define PWR_CTRL2_DIV1_UP_EN			(1 << 24)
-#define PWR_CTRL2_DUR_STANDBY2_VAL		(1 << 16)
-#define PWR_CTRL2_DUR_STANDBY1_VAL		(1 << 8)
-#define PWR_CTRL2_CORE2_UP_RATIO		(1 << 4)
-#define PWR_CTRL2_CORE1_UP_RATIO		(1 << 0)
-
-static int exynos4_enter_lowpower(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index);
-
-static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
-
-static struct cpuidle_driver exynos4_idle_driver = {
-	.name			= "exynos4_idle",
-	.owner			= THIS_MODULE,
-	.states = {
-		[0] = ARM_CPUIDLE_WFI_STATE,
-		[1] = {
-			.enter			= exynos4_enter_lowpower,
-			.exit_latency		= 300,
-			.target_residency	= 100000,
-			.flags			= CPUIDLE_FLAG_TIME_VALID,
-			.name			= "C1",
-			.desc			= "ARM power down",
-		},
-	},
-	.state_count = 2,
-	.safe_state_index = 0,
-};
-
-/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
-static void exynos4_set_wakeupmask(void)
-{
-	__raw_writel(0x0000ff3e, S5P_WAKEUP_MASK);
-}
-
-static unsigned int g_pwr_ctrl, g_diag_reg;
-
-static void save_cpu_arch_register(void)
-{
-	/*read power control register*/
-	asm("mrc p15, 0, %0, c15, c0, 0" : "=r"(g_pwr_ctrl) : : "cc");
-	/*read diagnostic register*/
-	asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc");
-	return;
-}
-
-static void restore_cpu_arch_register(void)
-{
-	/*write power control register*/
-	asm("mcr p15, 0, %0, c15, c0, 0" : : "r"(g_pwr_ctrl) : "cc");
-	/*write diagnostic register*/
-	asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc");
-	return;
-}
-
-static int idle_finisher(unsigned long flags)
-{
-	cpu_do_idle();
-	return 1;
-}
-
-static int exynos4_enter_core0_aftr(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index)
-{
-	unsigned long tmp;
-
-	exynos4_set_wakeupmask();
-
-	/* Set value of power down register for aftr mode */
-	exynos_sys_powerdown_conf(SYS_AFTR);
-
-	__raw_writel(virt_to_phys(exynos_cpu_resume), REG_DIRECTGO_ADDR);
-	__raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG);
-
-	save_cpu_arch_register();
-
-	/* Setting Central Sequence Register for power down mode */
-	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
-	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
-	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-
-	cpu_pm_enter();
-	cpu_suspend(0, idle_finisher);
-
-#ifdef CONFIG_SMP
-	if (!soc_is_exynos5250())
-		scu_enable(S5P_VA_SCU);
-#endif
-	cpu_pm_exit();
-
-	restore_cpu_arch_register();
-
-	/*
-	 * If PMU failed while entering sleep mode, WFI will be
-	 * ignored by PMU and then exiting cpu_do_idle().
-	 * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
-	 * in this situation.
-	 */
-	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
-	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
-		tmp |= S5P_CENTRAL_LOWPWR_CFG;
-		__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-	}
-
-	/* Clear wakeup state register */
-	__raw_writel(0x0, S5P_WAKEUP_STAT);
-
-	return index;
-}
-
-static int exynos4_enter_lowpower(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index)
-{
-	int new_index = index;
-
-	/* AFTR can only be entered when cores other than CPU0 are offline */
-	if (num_online_cpus() > 1 || dev->cpu != 0)
-		new_index = drv->safe_state_index;
-
-	if (new_index == 0)
-		return arm_cpuidle_simple_enter(dev, drv, new_index);
-	else
-		return exynos4_enter_core0_aftr(dev, drv, new_index);
-}
-
-static void __init exynos5_core_down_clk(void)
-{
-	unsigned int tmp;
-
-	/*
-	 * Enable arm clock down (in idle) and set arm divider
-	 * ratios in WFI/WFE state.
-	 */
-	tmp = PWR_CTRL1_CORE2_DOWN_RATIO | \
-	      PWR_CTRL1_CORE1_DOWN_RATIO | \
-	      PWR_CTRL1_DIV2_DOWN_EN	 | \
-	      PWR_CTRL1_DIV1_DOWN_EN	 | \
-	      PWR_CTRL1_USE_CORE1_WFE	 | \
-	      PWR_CTRL1_USE_CORE0_WFE	 | \
-	      PWR_CTRL1_USE_CORE1_WFI	 | \
-	      PWR_CTRL1_USE_CORE0_WFI;
-	__raw_writel(tmp, EXYNOS5_PWR_CTRL1);
-
-	/*
-	 * Enable arm clock up (on exiting idle). Set arm divider
-	 * ratios when not in idle along with the standby duration
-	 * ratios.
-	 */
-	tmp = PWR_CTRL2_DIV2_UP_EN	 | \
-	      PWR_CTRL2_DIV1_UP_EN	 | \
-	      PWR_CTRL2_DUR_STANDBY2_VAL | \
-	      PWR_CTRL2_DUR_STANDBY1_VAL | \
-	      PWR_CTRL2_CORE2_UP_RATIO	 | \
-	      PWR_CTRL2_CORE1_UP_RATIO;
-	__raw_writel(tmp, EXYNOS5_PWR_CTRL2);
-}
-
-static int exynos_cpuidle_probe(struct platform_device *pdev)
-{
-	int cpu_id, ret;
-	struct cpuidle_device *device;
-
-	if (soc_is_exynos5250())
-		exynos5_core_down_clk();
-
-	if (soc_is_exynos5440())
-		exynos4_idle_driver.state_count = 1;
-
-	ret = cpuidle_register_driver(&exynos4_idle_driver);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register cpuidle driver\n");
-		return ret;
-	}
-
-	for_each_online_cpu(cpu_id) {
-		device = &per_cpu(exynos4_cpuidle_device, cpu_id);
-		device->cpu = cpu_id;
-
-		ret = cpuidle_register_device(device);
-		if (ret) {
-			dev_err(&pdev->dev, "failed to register cpuidle device\n");
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-static struct platform_driver exynos_cpuidle_driver = {
-	.probe	= exynos_cpuidle_probe,
-	.driver = {
-		.name = "exynos_cpuidle",
-		.owner = THIS_MODULE,
-	},
-};
-
-module_platform_driver(exynos_cpuidle_driver);

arch/arm/mach-exynos/exynos.c

@@ -114,51 +114,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 	},
 };
 
-static struct map_desc exynos4_iodesc0[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4_iodesc1[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4210_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM_NS,
-		.pfn		= __phys_to_pfn(EXYNOS4210_PA_SYSRAM_NS),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4x12_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM_NS,
-		.pfn		= __phys_to_pfn(EXYNOS4x12_PA_SYSRAM_NS),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos5250_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM_NS,
-		.pfn		= __phys_to_pfn(EXYNOS5250_PA_SYSRAM_NS),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
 static struct map_desc exynos5_iodesc[] __initdata = {
 	{
 		.virtual	= (unsigned long)S3C_VA_SYS,
@@ -180,11 +135,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_SROMC),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_SYSRAM),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_CMU,
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_CMU),
@@ -221,12 +171,16 @@ void exynos_restart(enum reboot_mode mode, const char *cmd)
 }
 
 static struct platform_device exynos_cpuidle = {
-	.name		= "exynos_cpuidle",
-	.id		= -1,
+	.name              = "exynos_cpuidle",
+	.dev.platform_data = exynos_enter_aftr,
+	.id                = -1,
 };
 
 void __init exynos_cpuidle_init(void)
 {
+	if (soc_is_exynos5440())
+		return;
+
 	platform_device_register(&exynos_cpuidle);
 }
 
@@ -280,20 +234,6 @@ static void __init exynos_map_io(void)
 
 	if (soc_is_exynos5())
 		iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
-
-	if (soc_is_exynos4210()) {
-		if (samsung_rev() == EXYNOS4210_REV_0)
-			iotable_init(exynos4_iodesc0,
-						ARRAY_SIZE(exynos4_iodesc0));
-		else
-			iotable_init(exynos4_iodesc1,
-						ARRAY_SIZE(exynos4_iodesc1));
-		iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc));
-	}
-	if (soc_is_exynos4212() || soc_is_exynos4412())
-		iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc));
-	if (soc_is_exynos5250())
-		iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
 }
 
 void __init exynos_init_io(void)

arch/arm/mach-exynos/firmware.c

@@ -18,6 +18,7 @@
 
 #include <mach/map.h>
 
+#include "common.h"
 #include "smc.h"
 
 static int exynos_do_idle(void)
@@ -34,7 +35,12 @@ static int exynos_cpu_boot(int cpu)
 
 static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
 {
-	void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu;
+	void __iomem *boot_reg;
+
+	if (!sysram_ns_base_addr)
+		return -ENODEV;
+
+	boot_reg = sysram_ns_base_addr + 0x1c + 4*cpu;
 
 	__raw_writel(boot_addr, boot_reg);
 	return 0;

arch/arm/mach-exynos/hotplug.c

@@ -96,7 +96,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 
 		/* make cpu1 to be turned off at next WFI command */
 		if (cpu == 1)
-			__raw_writel(0, S5P_ARM_CORE1_CONFIGURATION);
+			exynos_cpu_power_down(cpu);
 
 		/*
 		 * here's the WFI

arch/arm/mach-exynos/include/mach/map.h

@@ -23,13 +23,6 @@
 
 #include <plat/map-s5p.h>
 
-#define EXYNOS4_PA_SYSRAM0		0x02025000
-#define EXYNOS4_PA_SYSRAM1		0x02020000
-#define EXYNOS5_PA_SYSRAM		0x02020000
-#define EXYNOS4210_PA_SYSRAM_NS		0x0203F000
-#define EXYNOS4x12_PA_SYSRAM_NS		0x0204F000
-#define EXYNOS5250_PA_SYSRAM_NS		0x0204F000
-
 #define EXYNOS_PA_CHIPID		0x10000000
 
 #define EXYNOS4_PA_SYSCON		0x10010000

arch/arm/mach-exynos/mcpm-exynos.c

@@ -0,0 +1,351 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * arch/arm/mach-exynos/mcpm-exynos.c
+ *
+ * Based on arch/arm/mach-vexpress/dcscb.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/arm-cci.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+
+#include <asm/cputype.h>
+#include <asm/cp15.h>
+#include <asm/mcpm.h>
+
+#include "regs-pmu.h"
+#include "common.h"
+
+#define EXYNOS5420_CPUS_PER_CLUSTER	4
+#define EXYNOS5420_NR_CLUSTERS		2
+#define MCPM_BOOT_ADDR_OFFSET		0x1c
+
+/*
+ * The common v7_exit_coherency_flush API could not be used because of the
+ * Erratum 799270 workaround. This macro is the same as the common one (in
+ * arch/arm/include/asm/cacheflush.h) except for the erratum handling.
+ */
+#define exynos_v7_exit_coherency_flush(level) \
+	asm volatile( \
+	"stmfd	sp!, {fp, ip}\n\t"\
+	"mrc	p15, 0, r0, c1, c0, 0	@ get SCTLR\n\t" \
+	"bic	r0, r0, #"__stringify(CR_C)"\n\t" \
+	"mcr	p15, 0, r0, c1, c0, 0	@ set SCTLR\n\t" \
+	"isb\n\t"\
+	"bl	v7_flush_dcache_"__stringify(level)"\n\t" \
+	"clrex\n\t"\
+	"mrc	p15, 0, r0, c1, c0, 1	@ get ACTLR\n\t" \
+	"bic	r0, r0, #(1 << 6)	@ disable local coherency\n\t" \
+	/* Dummy Load of a device register to avoid Erratum 799270 */ \
+	"ldr	r4, [%0]\n\t" \
+	"and	r4, r4, #0\n\t" \
+	"orr	r0, r0, r4\n\t" \
+	"mcr	p15, 0, r0, c1, c0, 1	@ set ACTLR\n\t" \
+	"isb\n\t" \
+	"dsb\n\t" \
+	"ldmfd	sp!, {fp, ip}" \
+	: \
+	: "Ir" (S5P_INFORM0) \
+	: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
+	  "r9", "r10", "lr", "memory")
+
+/*
+ * We can't use regular spinlocks. In the switcher case, it is possible
+ * for an outbound CPU to call power_down() after its inbound counterpart
+ * is already live using the same logical CPU number which trips lockdep
+ * debugging.
+ */
+static arch_spinlock_t exynos_mcpm_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+static int
+cpu_use_count[EXYNOS5420_CPUS_PER_CLUSTER][EXYNOS5420_NR_CLUSTERS];
+
+#define exynos_cluster_usecnt(cluster) \
+	(cpu_use_count[0][cluster] +   \
+	 cpu_use_count[1][cluster] +   \
+	 cpu_use_count[2][cluster] +   \
+	 cpu_use_count[3][cluster])
+
+#define exynos_cluster_unused(cluster) !exynos_cluster_usecnt(cluster)
+
+static int exynos_cluster_power_control(unsigned int cluster, int enable)
+{
+	unsigned int tries = 100;
+	unsigned int val;
+
+	if (enable) {
+		exynos_cluster_power_up(cluster);
+		val = S5P_CORE_LOCAL_PWR_EN;
+	} else {
+		exynos_cluster_power_down(cluster);
+		val = 0;
+	}
+
+	/* Wait until cluster power control is applied */
+	while (tries--) {
+		if (exynos_cluster_power_state(cluster) == val)
+			return 0;
+
+		cpu_relax();
+	}
+	pr_debug("timed out waiting for cluster %u to power %s\n", cluster,
+		enable ? "on" : "off");
+
+	return -ETIMEDOUT;
+}
+
+static int exynos_power_up(unsigned int cpu, unsigned int cluster)
+{
+	unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+	int err = 0;
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
+		cluster >= EXYNOS5420_NR_CLUSTERS)
+		return -EINVAL;
+
+	/*
+	 * Since this is called with IRQs enabled, and no arch_spin_lock_irq
+	 * variant exists, we need to disable IRQs manually here.
+	 */
+	local_irq_disable();
+	arch_spin_lock(&exynos_mcpm_lock);
+
+	cpu_use_count[cpu][cluster]++;
+	if (cpu_use_count[cpu][cluster] == 1) {
+		bool was_cluster_down =
+			(exynos_cluster_usecnt(cluster) == 1);
+
+		/*
+		 * Turn on the cluster (L2/COMMON) and then power on the
+		 * cores.
+		 */
+		if (was_cluster_down)
+			err = exynos_cluster_power_control(cluster, 1);
+
+		if (!err)
+			exynos_cpu_power_up(cpunr);
+		else
+			exynos_cluster_power_control(cluster, 0);
+	} else if (cpu_use_count[cpu][cluster] != 2) {
+		/*
+		 * The only possible values are:
+		 * 0 = CPU down
+		 * 1 = CPU (still) up
+		 * 2 = CPU requested to be up before it had a chance
+		 *     to actually make itself down.
+		 * Any other value is a bug.
+		 */
+		BUG();
+	}
+
+	arch_spin_unlock(&exynos_mcpm_lock);
+	local_irq_enable();
+
+	return err;
+}
+
+/*
+ * NOTE: This function requires the stack data to be visible through power down
+ * and can only be executed on processors like A15 and A7 that hit the cache
+ * with the C bit clear in the SCTLR register.
+ */
+static void exynos_power_down(void)
+{
+	unsigned int mpidr, cpu, cluster;
+	bool last_man = false, skip_wfi = false;
+	unsigned int cpunr;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	cpunr =  cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
+			cluster >= EXYNOS5420_NR_CLUSTERS);
+
+	__mcpm_cpu_going_down(cpu, cluster);
+
+	arch_spin_lock(&exynos_mcpm_lock);
+	BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
+	cpu_use_count[cpu][cluster]--;
+	if (cpu_use_count[cpu][cluster] == 0) {
+		exynos_cpu_power_down(cpunr);
+
+		if (exynos_cluster_unused(cluster))
+			/* TODO: Turn off the cluster here to save power. */
+			last_man = true;
+	} else if (cpu_use_count[cpu][cluster] == 1) {
+		/*
+		 * A power_up request went ahead of us.
+		 * Even if we do not want to shut this CPU down,
+		 * the caller expects a certain state as if the WFI
+		 * was aborted.  So let's continue with cache cleaning.
+		 */
+		skip_wfi = true;
+	} else {
+		BUG();
+	}
+
+	if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
+		arch_spin_unlock(&exynos_mcpm_lock);
+
+		if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) {
+			/*
+			 * On the Cortex-A15 we need to disable
+			 * L2 prefetching before flushing the cache.
+			 */
+			asm volatile(
+			"mcr	p15, 1, %0, c15, c0, 3\n\t"
+			"isb\n\t"
+			"dsb"
+			: : "r" (0x400));
+		}
+
+		/* Flush all cache levels for this cluster. */
+		exynos_v7_exit_coherency_flush(all);
+
+		/*
+		 * Disable cluster-level coherency by masking
+		 * incoming snoops and DVM messages:
+		 */
+		cci_disable_port_by_cpu(mpidr);
+
+		__mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
+	} else {
+		arch_spin_unlock(&exynos_mcpm_lock);
+
+		/* Disable and flush the local CPU cache. */
+		exynos_v7_exit_coherency_flush(louis);
+	}
+
+	__mcpm_cpu_down(cpu, cluster);
+
+	/* Now we are prepared for power-down, do it: */
+	if (!skip_wfi)
+		wfi();
+
+	/* Not dead at this point?  Let our caller cope. */
+}
+
+static int exynos_power_down_finish(unsigned int cpu, unsigned int cluster)
+{
+	unsigned int tries = 100;
+	unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
+			cluster >= EXYNOS5420_NR_CLUSTERS);
+
+	/* Wait for the core state to be OFF */
+	while (tries--) {
+		if (ACCESS_ONCE(cpu_use_count[cpu][cluster]) == 0) {
+			if ((exynos_cpu_power_state(cpunr) == 0))
+				return 0; /* success: the CPU is halted */
+		}
+
+		/* Otherwise, wait and retry: */
+		msleep(1);
+	}
+
+	return -ETIMEDOUT; /* timeout */
+}
+
+static const struct mcpm_platform_ops exynos_power_ops = {
+	.power_up		= exynos_power_up,
+	.power_down		= exynos_power_down,
+	.power_down_finish	= exynos_power_down_finish,
+};
+
+static void __init exynos_mcpm_usage_count_init(void)
+{
+	unsigned int mpidr, cpu, cluster;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER  ||
+			cluster >= EXYNOS5420_NR_CLUSTERS);
+
+	cpu_use_count[cpu][cluster] = 1;
+}
+
+/*
+ * Enable cluster-level coherency, in preparation for turning on the MMU.
+ */
+static void __naked exynos_pm_power_up_setup(unsigned int affinity_level)
+{
+	asm volatile ("\n"
+	"cmp	r0, #1\n"
+	"bxne	lr\n"
+	"b	cci_enable_port_for_self");
+}
+
+static int __init exynos_mcpm_init(void)
+{
+	struct device_node *node;
+	void __iomem *ns_sram_base_addr;
+	int ret;
+
+	node = of_find_compatible_node(NULL, NULL, "samsung,exynos5420");
+	if (!node)
+		return -ENODEV;
+	of_node_put(node);
+
+	if (!cci_probed())
+		return -ENODEV;
+
+	node = of_find_compatible_node(NULL, NULL,
+			"samsung,exynos4210-sysram-ns");
+	if (!node)
+		return -ENODEV;
+
+	ns_sram_base_addr = of_iomap(node, 0);
+	of_node_put(node);
+	if (!ns_sram_base_addr) {
+		pr_err("failed to map non-secure iRAM base address\n");
+		return -ENOMEM;
+	}
+
+	/*
+	 * To increase the stability of KFC reset we need to program
+	 * the PMU SPARE3 register
+	 */
+	__raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3);
+
+	exynos_mcpm_usage_count_init();
+
+	ret = mcpm_platform_register(&exynos_power_ops);
+	if (!ret)
+		ret = mcpm_sync_init(exynos_pm_power_up_setup);
+	if (ret) {
+		iounmap(ns_sram_base_addr);
+		return ret;
+	}
+
+	mcpm_smp_set_ops();
+
+	pr_info("Exynos MCPM support installed\n");
+
+	/*
+	 * Future entries into the kernel can now go
+	 * through the cluster entry vectors.
+	 */
+	__raw_writel(virt_to_phys(mcpm_entry_point),
+			ns_sram_base_addr + MCPM_BOOT_ADDR_OFFSET);
+
+	iounmap(ns_sram_base_addr);
+
+	return ret;
+}
+
+early_initcall(exynos_mcpm_init);

arch/arm/mach-exynos/platsmp.c

@@ -20,6 +20,7 @@
 #include <linux/jiffies.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/of_address.h>
 
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
@@ -33,11 +34,33 @@
 
 extern void exynos4_secondary_startup(void);
 
+void __iomem *sysram_base_addr;
+void __iomem *sysram_ns_base_addr;
+
+static void __init exynos_smp_prepare_sysram(void)
+{
+	struct device_node *node;
+
+	for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
+		if (!of_device_is_available(node))
+			continue;
+		sysram_base_addr = of_iomap(node, 0);
+		break;
+	}
+
+	for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") {
+		if (!of_device_is_available(node))
+			continue;
+		sysram_ns_base_addr = of_iomap(node, 0);
+		break;
+	}
+}
+
 static inline void __iomem *cpu_boot_reg_base(void)
 {
 	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
 		return S5P_INFORM5;
-	return S5P_VA_SYSRAM;
+	return sysram_base_addr;
 }
 
 static inline void __iomem *cpu_boot_reg(int cpu)
@@ -45,6 +68,8 @@ static inline void __iomem *cpu_boot_reg(int cpu)
 	void __iomem *boot_reg;
 
 	boot_reg = cpu_boot_reg_base();
+	if (!boot_reg)
+		return ERR_PTR(-ENODEV);
 	if (soc_is_exynos4412())
 		boot_reg += 4*cpu;
 	else if (soc_is_exynos5420())
@@ -90,6 +115,7 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 	unsigned long phys_cpu = cpu_logical_map(cpu);
+	int ret = -ENOSYS;
 
 	/*
 	 * Set synchronisation state between this boot processor
@@ -107,15 +133,12 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 */
 	write_pen_release(phys_cpu);
 
-	if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
-		__raw_writel(S5P_CORE_LOCAL_PWR_EN,
-			     S5P_ARM_CORE1_CONFIGURATION);
-
+	if (!exynos_cpu_power_state(cpu)) {
+		exynos_cpu_power_up(cpu);
 		timeout = 10;
 
 		/* wait max 10 ms until cpu1 is on */
-		while ((__raw_readl(S5P_ARM_CORE1_STATUS)
-			& S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
+		while (exynos_cpu_power_state(cpu) != S5P_CORE_LOCAL_PWR_EN) {
 			if (timeout-- == 0)
 				break;
 
@@ -146,8 +169,18 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		 * Try to set boot address using firmware first
 		 * and fall back to boot register if it fails.
 		 */
-		if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr))
+		ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
+		if (ret && ret != -ENOSYS)
+			goto fail;
+		if (ret == -ENOSYS) {
+			void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
+
+			if (IS_ERR(boot_reg)) {
+				ret = PTR_ERR(boot_reg);
+				goto fail;
+			}
 			__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
+		}
 
 		call_firmware_op(cpu_boot, phys_cpu);
 
@@ -163,9 +196,10 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * now the secondary core is starting up let it run its
 	 * calibrations, then wait for it to finish
 	 */
+fail:
 	spin_unlock(&boot_lock);
 
-	return pen_release != -1 ? -ENOSYS : 0;
+	return pen_release != -1 ? ret : 0;
 }
 
 /*
@@ -205,6 +239,8 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 	if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
 		scu_enable(scu_base_addr());
 
+	exynos_smp_prepare_sysram();
+
 	/*
 	 * Write the address of secondary startup into the
 	 * system-wide flags register. The boot monitor waits
@@ -217,12 +253,21 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 1; i < max_cpus; ++i) {
 		unsigned long phys_cpu;
 		unsigned long boot_addr;
+		int ret;
 
 		phys_cpu = cpu_logical_map(i);
 		boot_addr = virt_to_phys(exynos4_secondary_startup);
 
-		if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr))
+		ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
+		if (ret && ret != -ENOSYS)
+			break;
+		if (ret == -ENOSYS) {
+			void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
+
+			if (IS_ERR(boot_reg))
+				break;
 			__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
+		}
 	}
 }
 

arch/arm/mach-exynos/pm.c

@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/suspend.h>
 #include <linux/syscore_ops.h>
+#include <linux/cpu_pm.h>
 #include <linux/io.h>
 #include <linux/irqchip/arm-gic.h>
 #include <linux/err.h>
@@ -100,9 +101,141 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
 	return -ENOENT;
 }
 
+/**
+ * exynos_core_power_down : power down the specified cpu
+ * @cpu : the cpu to power down
+ *
+ * Power down the specified cpu. The sequence must be finished by a
+ * call to cpu_do_idle()
+ *
+ */
+void exynos_cpu_power_down(int cpu)
+{
+	__raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+}
+
+/**
+ * exynos_cpu_power_up : power up the specified cpu
+ * @cpu : the cpu to power up
+ *
+ * Power up the specified cpu
+ */
+void exynos_cpu_power_up(int cpu)
+{
+	__raw_writel(S5P_CORE_LOCAL_PWR_EN,
+		     EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+}
+
+/**
+ * exynos_cpu_power_state : returns the power state of the cpu
+ * @cpu : the cpu to retrieve the power state from
+ *
+ */
+int exynos_cpu_power_state(int cpu)
+{
+	return (__raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) &
+			S5P_CORE_LOCAL_PWR_EN);
+}
+
+/**
+ * exynos_cluster_power_down : power down the specified cluster
+ * @cluster : the cluster to power down
+ */
+void exynos_cluster_power_down(int cluster)
+{
+	__raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster));
+}
+
+/**
+ * exynos_cluster_power_up : power up the specified cluster
+ * @cluster : the cluster to power up
+ */
+void exynos_cluster_power_up(int cluster)
+{
+	__raw_writel(S5P_CORE_LOCAL_PWR_EN,
+		     EXYNOS_COMMON_CONFIGURATION(cluster));
+}
+
+/**
+ * exynos_cluster_power_state : returns the power state of the cluster
+ * @cluster : the cluster to retrieve the power state from
+ *
+ */
+int exynos_cluster_power_state(int cluster)
+{
+	return (__raw_readl(EXYNOS_COMMON_STATUS(cluster)) &
+			S5P_CORE_LOCAL_PWR_EN);
+}
+
+#define EXYNOS_BOOT_VECTOR_ADDR	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
+			S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+			(sysram_base_addr + 0x24) : S5P_INFORM0))
+#define EXYNOS_BOOT_VECTOR_FLAG	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
+			S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+			(sysram_base_addr + 0x20) : S5P_INFORM1))
+
+#define S5P_CHECK_AFTR  0xFCBA0D10
+#define S5P_CHECK_SLEEP 0x00000BAD
+
+/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
+static void exynos_set_wakeupmask(long mask)
+{
+	__raw_writel(mask, S5P_WAKEUP_MASK);
+}
+
+static void exynos_cpu_set_boot_vector(long flags)
+{
+	__raw_writel(virt_to_phys(exynos_cpu_resume), EXYNOS_BOOT_VECTOR_ADDR);
+	__raw_writel(flags, EXYNOS_BOOT_VECTOR_FLAG);
+}
+
+void exynos_enter_aftr(void)
+{
+	exynos_set_wakeupmask(0x0000ff3e);
+	exynos_cpu_set_boot_vector(S5P_CHECK_AFTR);
+	/* Set value of power down register for aftr mode */
+	exynos_sys_powerdown_conf(SYS_AFTR);
+}
+
 /* For Cortex-A9 Diagnostic and Power control register */
 static unsigned int save_arm_register[2];
 
+static void exynos_cpu_save_register(void)
+{
+	unsigned long tmp;
+
+	/* Save Power control register */
+	asm ("mrc p15, 0, %0, c15, c0, 0"
+	     : "=r" (tmp) : : "cc");
+
+	save_arm_register[0] = tmp;
+
+	/* Save Diagnostic register */
+	asm ("mrc p15, 0, %0, c15, c0, 1"
+	     : "=r" (tmp) : : "cc");
+
+	save_arm_register[1] = tmp;
+}
+
+static void exynos_cpu_restore_register(void)
+{
+	unsigned long tmp;
+
+	/* Restore Power control register */
+	tmp = save_arm_register[0];
+
+	asm volatile ("mcr p15, 0, %0, c15, c0, 0"
+		      : : "r" (tmp)
+		      : "cc");
+
+	/* Restore Diagnostic register */
+	tmp = save_arm_register[1];
+
+	asm volatile ("mcr p15, 0, %0, c15, c0, 1"
+		      : : "r" (tmp)
+		      : "cc");
+}
+
 static int exynos_cpu_suspend(unsigned long arg)
 {
 #ifdef CONFIG_CACHE_L2X0
@@ -147,37 +280,34 @@ static void exynos_pm_prepare(void)
 	__raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
 }
 
-static int exynos_pm_suspend(void)
+static void exynos_pm_central_suspend(void)
 {
 	unsigned long tmp;
 
 	/* Setting Central Sequence Register for power down mode */
-
 	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
 	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
 	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+}
+
+static int exynos_pm_suspend(void)
+{
+	unsigned long tmp;
+
+	exynos_pm_central_suspend();
 
 	/* Setting SEQ_OPTION register */
 
 	tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0);
 	__raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
 
-	if (!soc_is_exynos5250()) {
-		/* Save Power control register */
-		asm ("mrc p15, 0, %0, c15, c0, 0"
-		     : "=r" (tmp) : : "cc");
-		save_arm_register[0] = tmp;
-
-		/* Save Diagnostic register */
-		asm ("mrc p15, 0, %0, c15, c0, 1"
-		     : "=r" (tmp) : : "cc");
-		save_arm_register[1] = tmp;
-	}
+	if (!soc_is_exynos5250())
+		exynos_cpu_save_register();
 
 	return 0;
 }
 
-static void exynos_pm_resume(void)
+static int exynos_pm_central_resume(void)
 {
 	unsigned long tmp;
 
@@ -194,22 +324,20 @@ static void exynos_pm_resume(void)
 		/* clear the wakeup state register */
 		__raw_writel(0x0, S5P_WAKEUP_STAT);
 		/* No need to perform below restore code */
-		goto early_wakeup;
-	}
-	if (!soc_is_exynos5250()) {
-		/* Restore Power control register */
-		tmp = save_arm_register[0];
-		asm volatile ("mcr p15, 0, %0, c15, c0, 0"
-			      : : "r" (tmp)
-			      : "cc");
-
-		/* Restore Diagnostic register */
-		tmp = save_arm_register[1];
-		asm volatile ("mcr p15, 0, %0, c15, c0, 1"
-			      : : "r" (tmp)
-			      : "cc");
+		return -1;
 	}
 
+	return 0;
+}
+
+static void exynos_pm_resume(void)
+{
+	if (exynos_pm_central_resume())
+		goto early_wakeup;
+
+	if (!soc_is_exynos5250())
+		exynos_cpu_restore_register();
+
 	/* For release retention */
 
 	__raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION);
@@ -226,7 +354,7 @@ static void exynos_pm_resume(void)
 
 	s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
 
-	if (IS_ENABLED(CONFIG_SMP) && !soc_is_exynos5250())
+	if (!soc_is_exynos5250())
 		scu_enable(S5P_VA_SCU);
 
 early_wakeup:
@@ -304,10 +432,42 @@ static const struct platform_suspend_ops exynos_suspend_ops = {
 	.valid		= suspend_valid_only_mem,
 };
 
+static int exynos_cpu_pm_notifier(struct notifier_block *self,
+				  unsigned long cmd, void *v)
+{
+	int cpu = smp_processor_id();
+
+	switch (cmd) {
+	case CPU_PM_ENTER:
+		if (cpu == 0) {
+			exynos_pm_central_suspend();
+			exynos_cpu_save_register();
+		}
+		break;
+
+	case CPU_PM_EXIT:
+		if (cpu == 0) {
+			if (!soc_is_exynos5250())
+				scu_enable(S5P_VA_SCU);
+			exynos_cpu_restore_register();
+			exynos_pm_central_resume();
+		}
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block exynos_cpu_pm_notifier_block = {
+	.notifier_call = exynos_cpu_pm_notifier,
+};
+
 void __init exynos_pm_init(void)
 {
 	u32 tmp;
 
+	cpu_pm_register_notifier(&exynos_cpu_pm_notifier_block);
+
 	/* Platform-specific GIC callback */
 	gic_arch_extn.irq_set_wake = exynos_irq_set_wake;
 

arch/arm/mach-exynos/regs-pmu.h

@@ -38,6 +38,7 @@
 #define S5P_INFORM5				S5P_PMUREG(0x0814)
 #define S5P_INFORM6				S5P_PMUREG(0x0818)
 #define S5P_INFORM7				S5P_PMUREG(0x081C)
+#define S5P_PMU_SPARE3				S5P_PMUREG(0x090C)
 
 #define S5P_ARM_CORE0_LOWPWR			S5P_PMUREG(0x1000)
 #define S5P_DIS_IRQ_CORE0			S5P_PMUREG(0x1004)
@@ -105,8 +106,17 @@
 #define S5P_GPS_LOWPWR				S5P_PMUREG(0x139C)
 #define S5P_GPS_ALIVE_LOWPWR			S5P_PMUREG(0x13A0)
 
-#define S5P_ARM_CORE1_CONFIGURATION		S5P_PMUREG(0x2080)
-#define S5P_ARM_CORE1_STATUS			S5P_PMUREG(0x2084)
+#define EXYNOS_ARM_CORE0_CONFIGURATION		S5P_PMUREG(0x2000)
+#define EXYNOS_ARM_CORE_CONFIGURATION(_nr)	\
+			(EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr)))
+#define EXYNOS_ARM_CORE_STATUS(_nr)		\
+			(EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4)
+
+#define EXYNOS_ARM_COMMON_CONFIGURATION		S5P_PMUREG(0x2500)
+#define EXYNOS_COMMON_CONFIGURATION(_nr)	\
+			(EXYNOS_ARM_COMMON_CONFIGURATION + (0x80 * (_nr)))
+#define EXYNOS_COMMON_STATUS(_nr)		\
+			(EXYNOS_COMMON_CONFIGURATION(_nr) + 0x4)
 
 #define S5P_PAD_RET_MAUDIO_OPTION		S5P_PMUREG(0x3028)
 #define S5P_PAD_RET_GPIO_OPTION			S5P_PMUREG(0x3108)
@@ -119,8 +129,6 @@
 #define S5P_CORE_LOCAL_PWR_EN			0x3
 #define S5P_INT_LOCAL_PWR_EN			0x7
 
-#define S5P_CHECK_SLEEP				0x00000BAD
-
 /* Only for EXYNOS4210 */
 #define S5P_CMU_CLKSTOP_LCD1_LOWPWR	S5P_PMUREG(0x1154)
 #define S5P_CMU_RESET_LCD1_LOWPWR	S5P_PMUREG(0x1174)
@@ -313,4 +321,6 @@
 
 #define EXYNOS5_OPTION_USE_RETENTION				(1 << 4)
 
+#define EXYNOS5420_SWRESET_KFC_SEL				0x3
+
 #endif /* __ASM_ARCH_REGS_PMU_H */

arch/arm/mach-s3c24xx/Kconfig

@@ -18,6 +18,8 @@ config PLAT_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device
 
+
+
 menu "SAMSUNG S3C24XX SoCs Support"
 
 comment "S3C24XX SoCs"
@@ -27,7 +29,7 @@ config CPU_S3C2410
 	default y
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2410
-	select S3C2410_CLOCK
+	select S3C2410_COMMON_CLK
 	select S3C2410_DMA if S3C24XX_DMA
 	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
 	select S3C2410_PM if PM
@@ -40,6 +42,7 @@ config CPU_S3C2412
 	bool "SAMSUNG S3C2412"
 	select CPU_ARM926T
 	select CPU_LLSERIAL_S3C2440
+	select S3C2412_COMMON_CLK
 	select S3C2412_DMA if S3C24XX_DMA
 	select S3C2412_PM if PM
 	help
@@ -50,9 +53,8 @@ config CPU_S3C2416
 	select CPU_ARM926T
 	select CPU_LLSERIAL_S3C2440
 	select S3C2416_PM if PM
-	select S3C2443_COMMON
+	select S3C2443_COMMON_CLK
 	select S3C2443_DMA if S3C24XX_DMA
-	select SAMSUNG_CLKSRC
 	help
 	  Support for the S3C2416 SoC from the S3C24XX line
 
@@ -60,7 +62,7 @@ config CPU_S3C2440
 	bool "SAMSUNG S3C2440"
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
-	select S3C2410_CLOCK
+	select S3C2410_COMMON_CLK
 	select S3C2410_PM if PM
 	select S3C2440_DMA if S3C24XX_DMA
 	help
@@ -70,7 +72,7 @@ config CPU_S3C2442
 	bool "SAMSUNG S3C2442"
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
-	select S3C2410_CLOCK
+	select S3C2410_COMMON_CLK
 	select S3C2410_DMA if S3C24XX_DMA
 	select S3C2410_PM if PM
 	help
@@ -85,25 +87,13 @@ config CPU_S3C2443
 	bool "SAMSUNG S3C2443"
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
-	select S3C2443_COMMON
+	select S3C2443_COMMON_CLK
 	select S3C2443_DMA if S3C24XX_DMA
-	select SAMSUNG_CLKSRC
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
 # common code
 
-config S3C2410_CLOCK
-	bool
-	help
-	  Clock code for the S3C2410, and similar processors which
-	  is currently includes the S3C2410, S3C2440, S3C2442.
-
-config S3C24XX_DCLK
-	bool
-	help
-	  Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
-
 config S3C24XX_SMDK
 	bool
 	help
@@ -258,8 +248,8 @@ config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select ISA
 	select MACH_BAST_IDE
+	select S3C2410_COMMON_DCLK
 	select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
-	select S3C24XX_DCLK
 	select S3C24XX_SIMTEC_NOR
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C24XX_SIMTEC_USB
@@ -340,7 +330,7 @@ config MACH_TCT_HAMMER
 config MACH_VR1000
 	bool "Thorcom VR1000"
 	select MACH_BAST_IDE
-	select S3C24XX_DCLK
+	select S3C2410_COMMON_DCLK
 	select S3C24XX_SIMTEC_NOR
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C24XX_SIMTEC_USB
@@ -519,8 +509,8 @@ comment "S3C2440 Boards"
 config MACH_ANUBIS
 	bool "Simtec Electronics ANUBIS"
 	select HAVE_PATA_PLATFORM
+	select S3C2410_COMMON_DCLK
 	select S3C2440_XTAL_12000000
-	select S3C24XX_DCLK
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_USB_HOST
 	help
@@ -558,9 +548,9 @@ config MACH_NEXCODER_2440
 
 config MACH_OSIRIS
 	bool "Simtec IM2440D20 (OSIRIS) module"
+	select S3C2410_COMMON_DCLK
 	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_12000000
-	select S3C24XX_DCLK
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
@@ -629,9 +619,9 @@ config MACH_RX1950
 	bool "HP iPAQ rx1950"
 	select I2C
 	select PM_H1940 if PM
+	select S3C2410_COMMON_DCLK
 	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_16934400
-	select S3C24XX_DCLK
 	select S3C24XX_PWM
 	select S3C_DEV_NAND
 	help
@@ -641,12 +631,6 @@ endif	# CPU_S3C2442
 
 if CPU_S3C2443 || CPU_S3C2416
 
-config S3C2443_COMMON
-	bool
-	help
-	  Common code for the S3C2443 and similar processors, which includes
-	  the S3C2416 and S3C2450.
-
 config S3C2443_DMA
 	bool
 	help

arch/arm/mach-s3c24xx/Makefile

@@ -21,22 +21,22 @@ obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
 obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
 
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
 obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
 
-obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o clock-s3c2416.o
+obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o
 obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
 
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
 obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
 obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
 
-obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o clock-s3c2443.o
+obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o
 
 # PM
 
@@ -44,16 +44,13 @@ obj-$(CONFIG_PM)		+= pm.o irq-pm.o sleep.o
 
 # common code
 
-obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 obj-$(CONFIG_S3C24XX_DMA)	+= dma.o
 
-obj-$(CONFIG_S3C2410_CLOCK)	+= clock-s3c2410.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
 
 obj-$(CONFIG_S3C2410_IOTIMING)	+= iotiming-s3c2410.o
 obj-$(CONFIG_S3C2412_IOTIMING)	+= iotiming-s3c2412.o
 
-obj-$(CONFIG_S3C2443_COMMON)	+= common-s3c2443.o
 obj-$(CONFIG_S3C2443_DMA)	+= dma-s3c2443.o
 
 #

arch/arm/mach-s3c24xx/clock-dclk.c

@@ -1,195 +0,0 @@
-/*
- * Copyright (c) 2004-2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24XX - definitions for DCLK and CLKOUT registers
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
-	unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (enable)
-		dclkcon |= clk->ctrlbit;
-	else
-		dclkcon &= ~clk->ctrlbit;
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-	return 0;
-}
-
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long dclkcon;
-	unsigned int uclk;
-
-	if (parent == &clk_upll)
-		uclk = 1;
-	else if (parent == &clk_p)
-		uclk = 0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
-	} else {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
-	}
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-	return 0;
-}
-static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
-{
-	unsigned long div;
-
-	if ((rate == 0) || !clk->parent)
-		return 0;
-
-	div = clk_get_rate(clk->parent) / rate;
-	if (div < 2)
-		div = 2;
-	else if (div > 16)
-		div = 16;
-
-	return div;
-}
-
-static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
-	unsigned long rate)
-{
-	unsigned long div = s3c24xx_calc_div(clk, rate);
-
-	if (div == 0)
-		return 0;
-
-	return clk_get_rate(clk->parent) / div;
-}
-
-static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
-
-	if (div == 0)
-		return -EINVAL;
-
-	if (clk == &s3c24xx_dclk0) {
-		mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
-			S3C2410_DCLKCON_DCLK0_CMP_MASK;
-		data = S3C2410_DCLKCON_DCLK0_DIV(div) |
-			S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
-	} else if (clk == &s3c24xx_dclk1) {
-		mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
-			S3C2410_DCLKCON_DCLK1_CMP_MASK;
-		data = S3C2410_DCLKCON_DCLK1_DIV(div) |
-			S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
-	} else
-		return -EINVAL;
-
-	clk->rate = clk_get_rate(clk->parent) / div;
-	__raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
-		S3C24XX_DCLKCON);
-	return clk->rate;
-}
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long mask;
-	unsigned long source;
-
-	/* calculate the MISCCR setting for the clock */
-
-	if (parent == &clk_mpll)
-		source = S3C2410_MISCCR_CLK0_MPLL;
-	else if (parent == &clk_upll)
-		source = S3C2410_MISCCR_CLK0_UPLL;
-	else if (parent == &clk_f)
-		source = S3C2410_MISCCR_CLK0_FCLK;
-	else if (parent == &clk_h)
-		source = S3C2410_MISCCR_CLK0_HCLK;
-	else if (parent == &clk_p)
-		source = S3C2410_MISCCR_CLK0_PCLK;
-	else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	if (clk == &s3c24xx_clkout0)
-		mask = S3C2410_MISCCR_CLK0_MASK;
-	else {
-		source <<= 4;
-		mask = S3C2410_MISCCR_CLK1_MASK;
-	}
-
-	s3c2410_modify_misccr(mask, source);
-	return 0;
-}
-
-/* external clock definitions */
-
-static struct clk_ops dclk_ops = {
-	.set_parent	= s3c24xx_dclk_setparent,
-	.set_rate	= s3c24xx_set_dclk_rate,
-	.round_rate	= s3c24xx_round_dclk_rate,
-};
-
-struct clk s3c24xx_dclk0 = {
-	.name		= "dclk0",
-	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
-	.enable	        = s3c24xx_dclk_enable,
-	.ops		= &dclk_ops,
-};
-
-struct clk s3c24xx_dclk1 = {
-	.name		= "dclk1",
-	.ctrlbit	= S3C2410_DCLKCON_DCLK1EN,
-	.enable		= s3c24xx_dclk_enable,
-	.ops		= &dclk_ops,
-};
-
-static struct clk_ops clkout_ops = {
-	.set_parent	= s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_clkout0 = {
-	.name		= "clkout0",
-	.ops		= &clkout_ops,
-};
-
-struct clk s3c24xx_clkout1 = {
-	.name		= "clkout1",
-	.ops		= &clkout_ops,
-};

arch/arm/mach-s3c24xx/clock-s3c2410.c

@@ -1,284 +0,0 @@
-/*
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410,S3C2440,S3C2442 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-int s3c2410_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	/* ensure none of the special function bits set */
-	clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2410_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long orig = clkslow;
-
-	if (enable)
-		clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
-	else
-		clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
-
-	__raw_writel(clkslow, S3C2410_CLKSLOW);
-
-	/* if we started the UPLL, then allow to settle */
-
-	if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
-		udelay(200);
-
-	return 0;
-}
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SPI,
-	}
-};
-
-static struct clk clk_lcd = {
-	.name		= "lcd",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_LCDC,
-};
-
-static struct clk clk_gpio = {
-	.name		= "gpio",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_GPIO,
-};
-
-static struct clk clk_usb_host = {
-	.name		= "usb-host",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_USBH,
-};
-
-static struct clk clk_usb_device = {
-	.name		= "usb-device",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_USBD,
-};
-
-static struct clk clk_timers = {
-	.name		= "timers",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_PWMT,
-};
-
-struct clk s3c24xx_clk_uart0 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.0",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART0,
-};
-
-struct clk s3c24xx_clk_uart1 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.1",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART1,
-};
-
-struct clk s3c24xx_clk_uart2 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.2",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART2,
-};
-
-static struct clk clk_rtc = {
-	.name		= "rtc",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_RTC,
-};
-
-static struct clk clk_watchdog = {
-	.name		= "watchdog",
-	.parent		= &clk_p,
-	.ctrlbit	= 0,
-};
-
-static struct clk clk_usb_bus_host = {
-	.name		= "usb-bus-host",
-	.parent		= &clk_usb_bus,
-};
-
-static struct clk clk_usb_bus_gadget = {
-	.name		= "usb-bus-gadget",
-	.parent		= &clk_usb_bus,
-};
-
-static struct clk *init_clocks[] = {
-	&clk_lcd,
-	&clk_gpio,
-	&clk_usb_host,
-	&clk_usb_device,
-	&clk_timers,
-	&s3c24xx_clk_uart0,
-	&s3c24xx_clk_uart1,
-	&s3c24xx_clk_uart2,
-	&clk_rtc,
-	&clk_watchdog,
-	&clk_usb_bus_host,
-	&clk_usb_bus_gadget,
-};
-
-/* s3c2410_baseclk_add()
- *
- * Add all the clocks used by the s3c2410 or compatible CPUs
- * such as the S3C2440 and S3C2442.
- *
- * We cannot use a system device as we are needed before any
- * of the init-calls that initialise the devices are actually
- * done.
-*/
-
-int __init s3c2410_baseclk_add(void)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	struct clk *xtal;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2410_upll_enable;
-
-	if (s3c24xx_register_clock(&clk_usb_bus) < 0)
-		printk(KERN_ERR "failed to register usb bus clock\n");
-
-	/* register clocks from clock array */
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) {
-		struct clk *clkp = init_clocks[ptr];
-
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	/* show the clock-slow value */
-
-	xtal = clk_get(NULL, "xtal");
-
-	printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
-	       print_mhz(clk_get_rate(xtal) /
-			 ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
-	       (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
-	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
-	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
-
-	return 0;
-}

arch/arm/mach-s3c24xx/clock-s3c2412.c

@@ -1,760 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/clock.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412,S3C2413 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* We currently have to assume that the system is running
- * from the XTPll input, and that all ***REFCLKs are being
- * fed from it, as we cannot read the state of OM[4] from
- * software.
- *
- * It would be possible for each board initialisation to
- * set the correct muxing at initialisation
-*/
-
-static int s3c2412_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2412_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
-	unsigned long orig = upllcon;
-
-	if (!enable)
-		upllcon |= S3C2412_PLLCON_OFF;
-	else
-		upllcon &= ~S3C2412_PLLCON_OFF;
-
-	__raw_writel(upllcon, S3C2410_UPLLCON);
-
-	/* allow ~150uS for the PLL to settle and lock */
-
-	if (enable && (orig & S3C2412_PLLCON_OFF))
-		udelay(150);
-
-	return 0;
-}
-
-/* clock selections */
-
-static struct clk clk_erefclk = {
-	.name		= "erefclk",
-};
-
-static struct clk clk_urefclk = {
-	.name		= "urefclk",
-};
-
-static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_urefclk)
-		clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL;
-	else if (parent == &clk_upll)
-		clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static struct clk clk_usysclk = {
-	.name		= "usysclk",
-	.parent		= &clk_xtal,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_usysclk,
-	},
-};
-
-static struct clk clk_mrefclk = {
-	.name		= "mrefclk",
-	.parent		= &clk_xtal,
-};
-
-static struct clk clk_mdivclk = {
-	.name		= "mdivclk",
-	.parent		= &clk_xtal,
-};
-
-static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_usysclk)
-		clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK;
-	else if (parent == &clk_h)
-		clksrc |= S3C2412_CLKSRC_USBCLK_HCLK;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	div = parent_rate / rate;
-	if (div > 2)
-		div = 2;
-
-	return parent_rate / div;
-}
-
-static unsigned long s3c2412_getrate_usbsrc(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1);
-}
-
-static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_usbsrc(clk, rate);
-
-	if ((parent_rate / rate) == 2)
-		clkdivn |= S3C2412_CLKDIVN_USB48DIV;
-	else
-		clkdivn &= ~S3C2412_CLKDIVN_USB48DIV;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_usbsrc = {
-	.name		= "usbsrc",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_usbsrc,
-		.set_rate	= s3c2412_setrate_usbsrc,
-		.round_rate	= s3c2412_roundrate_usbsrc,
-		.set_parent	= s3c2412_setparent_usbsrc,
-	},
-};
-
-static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_mdivclk)
-		clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static struct clk clk_msysclk = {
-	.name		= "msysclk",
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_msysclk,
-	},
-};
-
-static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long flags;
-	unsigned long clkdiv;
-	unsigned long dvs;
-
-	/* Note, we current equate fclk andf msysclk for S3C2412 */
-
-	if (parent == &clk_msysclk || parent == &clk_f)
-		dvs = 0;
-	else if (parent == &clk_h)
-		dvs = S3C2412_CLKDIVN_DVSEN;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	/* update this under irq lockdown, clkdivn is not protected
-	 * by the clock system. */
-
-	local_irq_save(flags);
-
-	clkdiv  = __raw_readl(S3C2410_CLKDIVN);
-	clkdiv &= ~S3C2412_CLKDIVN_DVSEN;
-	clkdiv |= dvs;
-	__raw_writel(clkdiv, S3C2410_CLKDIVN);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk clk_armclk = {
-	.name		= "armclk",
-	.parent		= &clk_msysclk,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_armclk,
-	},
-};
-
-/* these next clocks have an divider immediately after them,
- * so we can register them with their divider and leave out the
- * intermediate clock stage
-*/
-static unsigned long s3c2412_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations as they cancel out */
-
-	div = (rate / parent_rate);
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / div;
-}
-
-static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_erefclk)
-		clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_getrate_uart(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_UARTDIV_MASK;
-	div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_uart = {
-	.name		= "uartclk",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_uart,
-		.set_rate	= s3c2412_setrate_uart,
-		.set_parent	= s3c2412_setparent_uart,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_erefclk)
-		clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_getrate_i2s(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_I2SDIV_MASK;
-	div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_i2s = {
-	.name		= "i2sclk",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_i2s,
-		.set_rate	= s3c2412_setrate_i2s,
-		.set_parent	= s3c2412_setparent_i2s,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_usysclk)
-		clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK;
-	else if (parent == &clk_h)
-		clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-static unsigned long s3c2412_getrate_cam(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_CAMDIV_MASK;
-	div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_cam = {
-	.name		= "camif-upll",	/* same as 2440 name */
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_cam,
-		.set_rate	= s3c2412_setrate_cam,
-		.set_parent	= s3c2412_setparent_cam,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-/* standard clock definitions */
-
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_SPI,
-	}
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "dma.0",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA0,
-	}, {
-		.name		= "dma.1",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA1,
-	}, {
-		.name		= "dma.2",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA2,
-	}, {
-		.name		= "dma.3",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA3,
-	}, {
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_LCDC,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USBD,
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_PWMT,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART2,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= 0,
-	}, {
-		.name		= "usb-bus-gadget",
-		.parent		= &clk_usb_bus,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USB_DEV48,
-	}, {
-		.name		= "usb-bus-host",
-		.parent		= &clk_usb_bus,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USB_HOST48,
-	}
-};
-
-/* clocks to add where we need to check their parentage */
-
-struct clk_init {
-	struct clk	*clk;
-	unsigned int	 bit;
-	struct clk	*src_0;
-	struct clk	*src_1;
-};
-
-static struct clk_init clks_src[] __initdata = {
-	{
-		.clk	= &clk_usysclk,
-		.bit	= S3C2412_CLKSRC_USBCLK_HCLK,
-		.src_0	= &clk_urefclk,
-		.src_1	= &clk_upll,
-	}, {
-		.clk	= &clk_i2s,
-		.bit	= S3C2412_CLKSRC_I2SCLK_MPLL,
-		.src_0	= &clk_erefclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_cam,
-		.bit	= S3C2412_CLKSRC_CAMCLK_HCLK,
-		.src_0	= &clk_usysclk,
-		.src_1	= &clk_h,
-	}, {
-		.clk	= &clk_msysclk,
-		.bit	= S3C2412_CLKSRC_MSYSCLK_MPLL,
-		.src_0	= &clk_mdivclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_uart,
-		.bit	= S3C2412_CLKSRC_UARTCLK_MPLL,
-		.src_0	= &clk_erefclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_usbsrc,
-		.bit	= S3C2412_CLKSRC_USBCLK_HCLK,
-		.src_0	= &clk_usysclk,
-		.src_1	= &clk_h,
-	/* here we assume  OM[4] select xtal */
-	}, {
-		.clk	= &clk_erefclk,
-		.bit	= S3C2412_CLKSRC_EREFCLK_EXTCLK,
-		.src_0	= &clk_xtal,
-		.src_1	= &clk_ext,
-	}, {
-		.clk	= &clk_urefclk,
-		.bit	= S3C2412_CLKSRC_UREFCLK_EXTCLK,
-		.src_0	= &clk_xtal,
-		.src_1	= &clk_ext,
-	},
-};
-
-/* s3c2412_clk_initparents
- *
- * Initialise the parents for the clocks that we get at start-time
-*/
-
-static void __init s3c2412_clk_initparents(void)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-	struct clk_init *cip = clks_src;
-	struct clk *src;
-	int ptr;
-	int ret;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) {
-		ret = s3c24xx_register_clock(cip->clk);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       cip->clk->name, ret);
-		}
-
-		src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0;
-
-		printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name);
-		clk_set_parent(cip->clk, src);
-	}
-}
-
-/* clocks to add straight away */
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_usb_bus,
-	&clk_mrefclk,
-	&clk_armclk,
-};
-
-static struct clk_lookup s3c2412_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk),
-};
-
-int __init s3c2412_baseclk_add(void)
-{
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	unsigned int dvs;
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2412_upll_enable;
-	clk_usb_bus.parent = &clk_usbsrc;
-	clk_usb_bus.rate = 0x0;
-
-	clk_f.parent = &clk_msysclk;
-
-	s3c2412_clk_initparents();
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* set the dvs state according to what we got at boot time */
-
-	dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN;
-
-	if (dvs)
-		clk_armclk.parent = &clk_h;
-
-	printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off");
-
-	/* ensure usb bus clock is within correct rate of 48MHz */
-
-	if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
-		printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n");
-
-		/* for the moment, let's use the UPLL, and see if we can
-		 * get 48MHz */
-
-		clk_set_parent(&clk_usysclk, &clk_upll);
-		clk_set_parent(&clk_usbsrc, &clk_usysclk);
-		clk_set_rate(&clk_usbsrc, 48*1000*1000);
-	}
-
-	printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
-	       (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on",
-	       print_mhz(clk_get_rate(&clk_upll)),
-	       print_mhz(clk_get_rate(&clk_usb_bus)));
-
-	/* register clocks from clock array */
-
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		s3c2412_clkcon_enable(clkp, 0);
-	}
-
-	clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup));
-	return 0;
-}

arch/arm/mach-s3c24xx/clock-s3c2416.c

@@ -1,171 +0,0 @@
-/* linux/arch/arm/mach-s3c2416/clock.c
- *
- * Copyright (c) 2010 Simtec Electronics
- * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * S3C2416 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/pll.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-s3c2443-clock.h>
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
- * The real clock definition is done in s3c2443-clock.c,
- * only the armdiv divisor table must be defined here.
-*/
-
-static unsigned int armdiv[8] = {
-	[0] = 1,
-	[1] = 2,
-	[2] = 3,
-	[3] = 4,
-	[5] = 6,
-	[7] = 8,
-};
-
-static struct clksrc_clk hsspi_eplldiv = {
-	.clk = {
-		.name	= "hsspi-eplldiv",
-		.parent	= &clk_esysclk.clk,
-		.ctrlbit = (1 << 14),
-		.enable = s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 },
-};
-
-static struct clk *hsspi_sources[] = {
-	[0] = &hsspi_eplldiv.clk,
-	[1] = NULL, /* to fix */
-};
-
-static struct clksrc_clk hsspi_mux = {
-	.clk	= {
-		.name	= "hsspi-if",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = hsspi_sources,
-		.nr_sources = ARRAY_SIZE(hsspi_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 },
-};
-
-static struct clksrc_clk hsmmc_div[] = {
-	[0] = {
-		.clk = {
-			.name	= "hsmmc-div",
-			.devname	= "s3c-sdhci.0",
-			.parent	= &clk_esysclk.clk,
-		},
-		.reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 },
-	},
-	[1] = {
-		.clk = {
-			.name	= "hsmmc-div",
-			.devname	= "s3c-sdhci.1",
-			.parent	= &clk_esysclk.clk,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
-	},
-};
-
-static struct clksrc_clk hsmmc_mux0 = {
-	.clk	= {
-		.name		= "hsmmc-if",
-		.devname	= "s3c-sdhci.0",
-		.ctrlbit	= (1 << 6),
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.sources	= &(struct clksrc_sources) {
-		.nr_sources	= 2,
-		.sources	= (struct clk * []) {
-			[0]	= &hsmmc_div[0].clk,
-			[1]	= NULL, /* to fix */
-		},
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 },
-};
-
-static struct clksrc_clk hsmmc_mux1 = {
-	.clk	= {
-		.name		= "hsmmc-if",
-		.devname	= "s3c-sdhci.1",
-		.ctrlbit	= (1 << 12),
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.sources	= &(struct clksrc_sources) {
-		.nr_sources	= 2,
-		.sources	= (struct clk * []) {
-			[0]	= &hsmmc_div[1].clk,
-			[1]	= NULL, /* to fix */
-		},
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 },
-};
-
-static struct clk hsmmc0_clk = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.0",
-	.parent		= &clk_h,
-	.enable		= s3c2443_clkcon_enable_h,
-	.ctrlbit	= S3C2416_HCLKCON_HSMMC0,
-};
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&hsspi_eplldiv,
-	&hsspi_mux,
-	&hsmmc_div[0],
-	&hsmmc_div[1],
-	&hsmmc_mux0,
-	&hsmmc_mux1,
-};
-
-static struct clk_lookup s3c2416_clk_lookup[] = {
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
-	/* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */
-	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk),
-};
-
-void __init s3c2416_init_clocks(int xtal)
-{
-	u32 epllcon = __raw_readl(S3C2443_EPLLCON);
-	u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4);
-	int ptr;
-
-	/* s3c2416 EPLL compatible with s3c64xx */
-	clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1);
-
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c2443_common_init_clocks(xtal, s3c2416_get_pll,
-				   armdiv, ARRAY_SIZE(armdiv),
-				   S3C2416_CLKDIV0_ARMDIV_MASK);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	s3c24xx_register_clock(&hsmmc0_clk);
-	clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup));
-
-}

arch/arm/mach-s3c24xx/clock-s3c2440.c

@@ -1,217 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* S3C2440 extended clock support */
-
-static unsigned long s3c2440_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div = (parent_rate / rate) / 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2440_camif_upll_round(clk, rate);
-
-	camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
-
-	if (rate != parent_rate) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-static unsigned long s3c2440_camif_upll_getrate(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	if (!(camdivn & S3C2440_CAMDIVN_CAMCLK_SEL))
-		return parent_rate;
-
-	camdivn &= S3C2440_CAMDIVN_CAMCLK_MASK;
-
-	return parent_rate / (camdivn + 1) / 2;
-}
-
-/* Extra S3C2440 clocks */
-
-static struct clk s3c2440_clk_cam = {
-	.name		= "camif",
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2440_clk_cam_upll = {
-	.name		= "camif-upll",
-	.ops		= &(struct clk_ops) {
-		.set_rate	= s3c2440_camif_upll_setrate,
-		.get_rate	= s3c2440_camif_upll_getrate,
-		.round_rate	= s3c2440_camif_upll_round,
-	},
-};
-
-static struct clk s3c2440_clk_ac97 = {
-	.name		= "ac97",
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_AC97,
-};
-
-#define S3C24XX_VA_UART0      (S3C_VA_UART)
-#define S3C24XX_VA_UART1      (S3C_VA_UART + 0x4000 )
-#define S3C24XX_VA_UART2      (S3C_VA_UART + 0x8000 )
-#define S3C24XX_VA_UART3      (S3C_VA_UART + 0xC000 )
-
-static unsigned long  s3c2440_fclk_n_getrate(struct clk *clk)
-{
-	unsigned long ucon0, ucon1, ucon2, divisor;
-
-	/* the fun of calculating the uart divisors on the s3c2440 */
-	ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
-	ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
-	ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
-
-	ucon0 &= S3C2440_UCON0_DIVMASK;
-	ucon1 &= S3C2440_UCON1_DIVMASK;
-	ucon2 &= S3C2440_UCON2_DIVMASK;
-
-	if (ucon0 != 0)
-		divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6;
-	else if (ucon1 != 0)
-		divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21;
-	else if (ucon2 != 0)
-		divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36;
-	else
-		/* manual calims 44, seems to be 9 */
-		divisor = 9;
-
-	return clk_get_rate(clk->parent) / divisor;
-}
-
-static struct clk s3c2440_clk_fclk_n = {
-	.name		= "fclk_n",
-	.parent		= &clk_f,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2440_fclk_n_getrate,
-	},
-};
-
-static struct clk_lookup s3c2440_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
-	CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0),
-	CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1),
-	CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2),
-	CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll),
-};
-
-static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *clock_upll;
-	struct clk *clock_h;
-	struct clk *clock_p;
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	s3c2440_clk_cam.parent = clock_h;
-	s3c2440_clk_ac97.parent = clock_p;
-	s3c2440_clk_cam_upll.parent = clock_upll;
-	s3c24xx_register_clock(&s3c2440_clk_fclk_n);
-
-	s3c24xx_register_clock(&s3c2440_clk_ac97);
-	s3c24xx_register_clock(&s3c2440_clk_cam);
-	s3c24xx_register_clock(&s3c2440_clk_cam_upll);
-	clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup));
-
-	clk_disable(&s3c2440_clk_ac97);
-	clk_disable(&s3c2440_clk_cam);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
-	.name		= "s3c2440_clk",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_clk_add,
-};
-
-static __init int s3c24xx_clk_init(void)
-{
-	return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c24xx_clk_init);

arch/arm/mach-s3c24xx/clock-s3c2443.c

@@ -1,212 +0,0 @@
-/* linux/arch/arm/mach-s3c2443/clock.c
- *
- * Copyright (c) 2007, 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2443 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-/* We currently have to assume that the system is running
- * from the XTPll input, and that all ***REFCLKs are being
- * fed from it, as we cannot read the state of OM[4] from
- * software.
- *
- * It would be possible for each board initialisation to
- * set the correct muxing at initialisation
-*/
-
-/* clock selections */
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
- * The real clock definition is done in s3c2443-clock.c,
- * only the armdiv divisor table must be defined here.
-*/
-
-static unsigned int armdiv[16] = {
-	[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 1,
-	[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 2,
-	[S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 3,
-	[S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 4,
-	[S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 6,
-	[S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 8,
-	[S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 12,
-	[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 16,
-};
-
-/* hsspi
- *
- * high-speed spi clock, sourced from esysclk
-*/
-
-static struct clksrc_clk clk_hsspi = {
-	.clk	= {
-		.name		= "hsspi-if",
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
-
-
-/* clk_hsmcc_div
- *
- * this clock is sourced from epll, and is fed through a divider,
- * to a mux controlled by sclkcon where either it or a extclk can
- * be fed to the hsmmc block
-*/
-
-static struct clksrc_clk clk_hsmmc_div = {
-	.clk	= {
-		.name		= "hsmmc-div",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
-};
-
-static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_SCLKCON);
-
-	clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT |
-		    S3C2443_SCLKCON_HSMMCCLK_EPLL);
-
-	if (parent == &clk_epll)
-		clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL;
-	else if (parent == &clk_ext)
-		clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT;
-	else
-		return -EINVAL;
-
-	if (clk->usage > 0) {
-		__raw_writel(clksrc, S3C2443_SCLKCON);
-	}
-
-	clk->parent = parent;
-	return 0;
-}
-
-static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
-{
-	return s3c2443_setparent_hsmmc(clk, clk->parent);
-}
-
-static struct clk clk_hsmmc = {
-	.name		= "hsmmc-if",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_hsmmc_div.clk,
-	.enable		= s3c2443_enable_hsmmc,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2443_setparent_hsmmc,
-	},
-};
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_SDI,
-	}, {
-		.name		= "spi",
-		.devname	= "s3c2410-spi.0",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_SPI1,
-	}
-};
-
-/* clocks to add straight away */
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&clk_hsspi,
-	&clk_hsmmc_div,
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_hsmmc,
-};
-
-static struct clk_lookup s3c2443_clk_lookup[] = {
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
-	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk),
-};
-
-void __init s3c2443_init_clocks(int xtal)
-{
-	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
-	int ptr;
-
-	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c2443_common_init_clocks(xtal, s3c2443_get_mpll,
-				   armdiv, ARRAY_SIZE(armdiv),
-				   S3C2443_CLKDIV0_ARMDIV_MASK);
-
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-}

arch/arm/mach-s3c24xx/clock-s3c244x.c

@@ -1,141 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
- *
- * Copyright (c) 2004-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440/S3C2442 Common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long camdivn;
-	unsigned long dvs;
-
-	if (parent == &clk_f)
-		dvs = 0;
-	else if (parent == &clk_h)
-		dvs = S3C2440_CAMDIVN_DVSEN;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	camdivn  = __raw_readl(S3C2440_CAMDIVN);
-	camdivn &= ~S3C2440_CAMDIVN_DVSEN;
-	camdivn |= dvs;
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2440_setparent_armclk,
-	},
-};
-
-static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-	unsigned long clkdivn;
-	struct clk *clock_upll;
-	int ret;
-
-	printk("S3C244X: Clock Support, DVS %s\n",
-	       (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
-
-	clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
-
-	ret = s3c24xx_register_clock(&clk_arm);
-	if (ret < 0) {
-		printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
-		return ret;
-	}
-
-	clock_upll = clk_get(NULL, "upll");
-	if (IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
-		return -ENOENT;
-	}
-
-	/* check rate of UPLL, and if it is near 96MHz, then change
-	 * to using half the UPLL rate for the system */
-
-	if (clk_get_rate(clock_upll) > (94 * MHZ)) {
-		clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
-		spin_lock(&clocks_lock);
-
-		clkdivn = __raw_readl(S3C2410_CLKDIVN);
-		clkdivn |= S3C2440_CLKDIVN_UCLK;
-		__raw_writel(clkdivn, S3C2410_CLKDIVN);
-
-		spin_unlock(&clocks_lock);
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
-	.name		= "s3c2440_clk",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c244x_clk_add,
-};
-
-static int s3c2440_clk_init(void)
-{
-	return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c2440_clk_init);
-
-static struct subsys_interface s3c2442_clk_interface = {
-	.name		= "s3c2442_clk",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c244x_clk_add,
-};
-
-static int s3c2442_clk_init(void)
-{
-	return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);

arch/arm/mach-s3c24xx/common-s3c2443.c

@@ -1,675 +0,0 @@
-/*
- * Common code for SoCs starting with the S3C2443
- *
- * Copyright (c) 2007, 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-#include <plat/cpu-freq.h>
-
-
-static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
-{
-	u32 ctrlbit = clk->ctrlbit;
-	u32 con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
-}
-
-/* mpllref is a direct descendant of clk_xtal by default, but it is not
- * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
- * such directly equating the two source clocks is impossible.
- */
-static struct clk clk_mpllref = {
-	.name		= "mpllref",
-	.parent		= &clk_xtal,
-};
-
-static struct clk *clk_epllref_sources[] = {
-	[0] = &clk_mpllref,
-	[1] = &clk_mpllref,
-	[2] = &clk_xtal,
-	[3] = &clk_ext,
-};
-
-struct clksrc_clk clk_epllref = {
-	.clk	= {
-		.name		= "epllref",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_epllref_sources,
-		.nr_sources = ARRAY_SIZE(clk_epllref_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
-};
-
-/* esysclk
- *
- * this is sourced from either the EPLL or the EPLLref clock
-*/
-
-static struct clk *clk_sysclk_sources[] = {
-	[0] = &clk_epllref.clk,
-	[1] = &clk_epll,
-};
-
-struct clksrc_clk clk_esysclk = {
-	.clk	= {
-		.name		= "esysclk",
-		.parent		= &clk_epll,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_sysclk_sources,
-		.nr_sources = ARRAY_SIZE(clk_sysclk_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
-};
-
-static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV0);
-
-	div  &= S3C2443_CLKDIV0_EXTDIV_MASK;
-	div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1);	/* x2 */
-
-	return parent_rate / (div + 1);
-}
-
-static struct clk clk_mdivclk = {
-	.name		= "mdivclk",
-	.parent		= &clk_mpllref,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2443_getrate_mdivclk,
-	},
-};
-
-static struct clk *clk_msysclk_sources[] = {
-	[0] = &clk_mpllref,
-	[1] = &clk_mpll,
-	[2] = &clk_mdivclk,
-	[3] = &clk_mpllref,
-};
-
-static struct clksrc_clk clk_msysclk = {
-	.clk	= {
-		.name		= "msysclk",
-		.parent		= &clk_xtal,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_msysclk_sources,
-		.nr_sources = ARRAY_SIZE(clk_msysclk_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
-};
-
-/* prediv
- *
- * this divides the msysclk down to pass to h/p/etc.
- */
-
-static unsigned long s3c2443_prediv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
-	clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk clk_prediv = {
-	.name		= "prediv",
-	.parent		= &clk_msysclk.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2443_prediv_getrate,
-	},
-};
-
-/* hclk divider
- *
- * divides the prediv and provides the hclk.
- */
-
-static unsigned long s3c2443_hclkdiv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk_ops clk_h_ops = {
-	.get_rate	= s3c2443_hclkdiv_getrate,
-};
-
-/* pclk divider
- *
- * divides the hclk and provides the pclk.
- */
-
-static unsigned long s3c2443_pclkdiv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 = ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 1 : 0);
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk_ops clk_p_ops = {
-	.get_rate	= s3c2443_pclkdiv_getrate,
-};
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
-*/
-
-static unsigned int *armdiv;
-static int nr_armdiv;
-static int armdivmask;
-
-static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned best = 256; /* bigger than any value */
-	unsigned div;
-	int ptr;
-
-	if (!nr_armdiv)
-		return -EINVAL;
-
-	for (ptr = 0; ptr < nr_armdiv; ptr++) {
-		div = armdiv[ptr];
-		if (div) {
-			/* cpufreq provides 266mhz as 266666000 not 266666666 */
-			calc = (parent / div / 1000) * 1000;
-			if (calc <= rate && div < best)
-				best = div;
-		}
-	}
-
-	return parent / best;
-}
-
-static unsigned long s3c2443_armclk_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkcon0;
-	int val;
-
-	if (!nr_armdiv || !armdivmask)
-		return -EINVAL;
-
-	clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-	clkcon0 &= armdivmask;
-	val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT;
-
-	return rate / armdiv[val];
-}
-
-static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned div;
-	unsigned best = 256; /* bigger than any value */
-	int ptr;
-	int val = -1;
-
-	if (!nr_armdiv || !armdivmask)
-		return -EINVAL;
-
-	for (ptr = 0; ptr < nr_armdiv; ptr++) {
-		div = armdiv[ptr];
-		if (div) {
-			/* cpufreq provides 266mhz as 266666000 not 266666666 */
-			calc = (parent / div / 1000) * 1000;
-			if (calc <= rate && div < best) {
-				best = div;
-				val = ptr;
-			}
-		}
-	}
-
-	if (val >= 0) {
-		unsigned long clkcon0;
-
-		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-		clkcon0 &= ~armdivmask;
-		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
-		__raw_writel(clkcon0, S3C2443_CLKDIV0);
-	}
-
-	return (val == -1) ? -EINVAL : 0;
-}
-
-static struct clk clk_armdiv = {
-	.name		= "armdiv",
-	.parent		= &clk_msysclk.clk,
-	.ops		= &(struct clk_ops) {
-		.round_rate = s3c2443_armclk_roundrate,
-		.get_rate = s3c2443_armclk_getrate,
-		.set_rate = s3c2443_armclk_setrate,
-	},
-};
-
-/* armclk
- *
- * this is the clock fed into the ARM core itself, from armdiv or from hclk.
- */
-
-static struct clk *clk_arm_sources[] = {
-	[0] = &clk_armdiv,
-	[1] = &clk_h,
-};
-
-static struct clksrc_clk clk_arm = {
-	.clk	= {
-		.name		= "armclk",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_arm_sources,
-		.nr_sources = ARRAY_SIZE(clk_arm_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
-};
-
-/* usbhost
- *
- * usb host bus-clock, usually 48MHz to provide USB bus clock timing
-*/
-
-static struct clksrc_clk clk_usb_bus_host = {
-	.clk	= {
-		.name		= "usb-bus-host-parent",
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_USBHOST,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
-
-/* common clksrc clocks */
-
-static struct clksrc_clk clksrc_clks[] = {
-	{
-		/* camera interface bus-clock, divided down from esysclk */
-		.clk	= {
-			.name		= "camif-upll",	/* same as 2440 name */
-			.parent		= &clk_esysclk.clk,
-			.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
-			.enable		= s3c2443_clkcon_enable_s,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
-	}, {
-		.clk	= {
-			.name		= "display-if",
-			.parent		= &clk_esysclk.clk,
-			.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
-			.enable		= s3c2443_clkcon_enable_s,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
-	},
-};
-
-static struct clksrc_clk clk_esys_uart = {
-	/* ART baud-rate clock sourced from esysclk via a divisor */
-	.clk	= {
-		.name		= "uartclk",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
-};
-
-static struct clk clk_i2s_ext = {
-	.name		= "i2s-ext",
-};
-
-/* i2s_eplldiv
- *
- * This clock is the output from the I2S divisor of ESYSCLK, and is separate
- * from the mux that comes after it (cannot merge into one single clock)
-*/
-
-static struct clksrc_clk clk_i2s_eplldiv = {
-	.clk	= {
-		.name		= "i2s-eplldiv",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
-};
-
-/* i2s-ref
- *
- * i2s bus reference clock, selectable from external, esysclk or epllref
- *
- * Note, this used to be two clocks, but was compressed into one.
-*/
-
-static struct clk *clk_i2s_srclist[] = {
-	[0] = &clk_i2s_eplldiv.clk,
-	[1] = &clk_i2s_ext,
-	[2] = &clk_epllref.clk,
-	[3] = &clk_epllref.clk,
-};
-
-static struct clksrc_clk clk_i2s = {
-	.clk	= {
-		.name		= "i2s-if",
-		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
-		.enable		= s3c2443_clkcon_enable_s,
-
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_i2s_srclist,
-		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
-};
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIS,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIC,
-	}
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "dma.0",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA0,
-	}, {
-		.name		= "dma.1",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA1,
-	}, {
-		.name		= "dma.2",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA2,
-	}, {
-		.name		= "dma.3",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA3,
-	}, {
-		.name		= "dma.4",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA4,
-	}, {
-		.name		= "dma.5",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA5,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBD,
-	}, {
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_LCDC,
-
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_PWMT,
-	}, {
-		.name		= "cfc",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_CFC,
-	}, {
-		.name		= "ssmc",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_SSMC,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART2,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.3",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART3,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_WDT,
-	}, {
-		.name		= "ac97",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_AC97,
-	}, {
-		.name		= "nand",
-		.parent		= &clk_h,
-	}, {
-		.name		= "usb-bus-host",
-		.parent		= &clk_usb_bus_host.clk,
-	}
-};
-
-static struct clk hsmmc1_clk = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_h,
-	.enable		= s3c2443_clkcon_enable_h,
-	.ctrlbit	= S3C2443_HCLKCON_HSMMC,
-};
-
-static struct clk hsspi_clk = {
-	.name		= "spi",
-	.devname	= "s3c2443-spi.0",
-	.parent		= &clk_p,
-	.enable		= s3c2443_clkcon_enable_p,
-	.ctrlbit	= S3C2443_PCLKCON_HSSPI,
-};
-
-/* EPLLCON compatible enough to get on/off information */
-
-void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
-{
-	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
-	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long pll;
-	int ptr;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	pll = get_mpll(mpllcon, xtal);
-	clk_msysclk.clk.rate = pll;
-	clk_mpll.rate = pll;
-
-	printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
-	       (mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
-	       print_mhz(pll), print_mhz(clk_get_rate(&clk_armdiv)),
-	       print_mhz(clk_get_rate(&clk_h)),
-	       print_mhz(clk_get_rate(&clk_p)));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
-		s3c_set_clksrc(&clksrc_clks[ptr], true);
-
-	/* ensure usb bus clock is within correct rate of 48MHz */
-
-	if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
-		printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
-		clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
-	}
-
-	printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
-	       (epllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
-	       print_mhz(clk_get_rate(&clk_epll)),
-	       print_mhz(clk_get_rate(&clk_usb_bus)));
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_prediv,
-	&clk_mpllref,
-	&clk_mdivclk,
-	&clk_ext,
-	&clk_epll,
-	&clk_usb_bus,
-	&clk_armdiv,
-	&hsmmc1_clk,
-	&hsspi_clk,
-};
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&clk_i2s_eplldiv,
-	&clk_i2s,
-	&clk_usb_bus_host,
-	&clk_epllref,
-	&clk_esysclk,
-	&clk_msysclk,
-	&clk_arm,
-};
-
-static struct clk_lookup s3c2443_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
-	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk),
-};
-
-void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
-				       unsigned int *divs, int nr_divs,
-				       int divmask)
-{
-	int ptr;
-
-	armdiv = divs;
-	nr_armdiv = nr_divs;
-	armdivmask = divmask;
-
-	/* s3c2443 parents h clock from prediv */
-	clk_h.parent = &clk_prediv;
-	clk_h.ops = &clk_h_ops;
-
-	/* and p clock from h clock */
-	clk_p.parent = &clk_h;
-	clk_p.ops = &clk_p_ops;
-
-	clk_usb_bus.parent = &clk_usb_bus_host.clk;
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
-	/* See s3c2443/etc notes on disabling clocks at init time */
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-
-	s3c2443_common_setup_clocks(get_mpll);
-}

arch/arm/mach-s3c24xx/common.c

@@ -53,6 +53,7 @@
 #include <plat/cpu-freq.h>
 #include <plat/pll.h>
 #include <plat/pwm-core.h>
+#include <plat/watchdog-reset.h>
 
 #include "common.h"
 
@@ -73,7 +74,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32410000,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2410_map_io,
-		.init_clocks	= s3c2410_init_clocks,
 		.init_uarts	= s3c2410_init_uarts,
 		.init		= s3c2410_init,
 		.name		= name_s3c2410
@@ -82,7 +82,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32410002,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2410_map_io,
-		.init_clocks	= s3c2410_init_clocks,
 		.init_uarts	= s3c2410_init_uarts,
 		.init		= s3c2410a_init,
 		.name		= name_s3c2410a
@@ -91,7 +90,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440000,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2440_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2440_init,
 		.name		= name_s3c2440
@@ -100,7 +98,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440001,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2440_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2440_init,
 		.name		= name_s3c2440a
@@ -109,7 +106,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440aaa,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2442_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2442_init,
 		.name		= name_s3c2442
@@ -118,7 +114,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440aab,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2442_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2442_init,
 		.name		= name_s3c2442b
@@ -127,7 +122,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32412001,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2412_map_io,
-		.init_clocks	= s3c2412_init_clocks,
 		.init_uarts	= s3c2412_init_uarts,
 		.init		= s3c2412_init,
 		.name		= name_s3c2412,
@@ -136,7 +130,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32412003,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2412_map_io,
-		.init_clocks	= s3c2412_init_clocks,
 		.init_uarts	= s3c2412_init_uarts,
 		.init		= s3c2412_init,
 		.name		= name_s3c2412,
@@ -145,7 +138,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32450003,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2416_map_io,
-		.init_clocks	= s3c2416_init_clocks,
 		.init_uarts	= s3c2416_init_uarts,
 		.init		= s3c2416_init,
 		.name		= name_s3c2416,
@@ -154,7 +146,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32443001,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2443_map_io,
-		.init_clocks	= s3c2443_init_clocks,
 		.init_uarts	= s3c2443_init_uarts,
 		.init		= s3c2443_init,
 		.name		= name_s3c2443,
@@ -316,21 +307,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
 	},
 };
 
-/* initialise all the clocks */
-
-void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
-					   unsigned long hclk,
-					   unsigned long pclk)
-{
-	clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
-					clk_xtal.rate);
-
-	clk_mpll.rate = fclk;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
-}
-
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
 	defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 static struct resource s3c2410_dma_resource[] = {
@@ -534,3 +510,62 @@ struct platform_device s3c2443_device_dma = {
 	},
 };
 #endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410)
+void __init s3c2410_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+void __init s3c2412_init_clocks(int xtal)
+{
+	s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2416
+void __init s3c2416_init_clocks(int xtal)
+{
+	s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440)
+void __init s3c2440_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
+	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442)
+void __init s3c2442_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR);
+	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+void __init s3c2443_init_clocks(int xtal)
+{
+	s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \
+	defined(CONFIG_CPU_S3C2442)
+static struct resource s3c2410_dclk_resource[] = {
+	[0] = DEFINE_RES_MEM(0x56000084, 0x4),
+};
+
+struct platform_device s3c2410_device_dclk = {
+	.name		= "s3c2410-dclk",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dclk_resource),
+	.resource	= s3c2410_dclk_resource,
+};
+#endif

arch/arm/mach-s3c24xx/common.h

@@ -67,16 +67,15 @@ extern struct syscore_ops s3c2416_irq_syscore_ops;
 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 extern void s3c244x_map_io(void);
 extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c244x_init_clocks(int xtal);
 extern void s3c244x_restart(enum reboot_mode mode, const char *cmd);
 #else
-#define s3c244x_init_clocks NULL
 #define s3c244x_init_uarts NULL
 #endif
 
 #ifdef CONFIG_CPU_S3C2440
 extern  int s3c2440_init(void);
 extern void s3c2440_map_io(void);
+extern void s3c2440_init_clocks(int xtal);
 extern void s3c2440_init_irq(void);
 #else
 #define s3c2440_init NULL
@@ -86,6 +85,7 @@ extern void s3c2440_init_irq(void);
 #ifdef CONFIG_CPU_S3C2442
 extern  int s3c2442_init(void);
 extern void s3c2442_map_io(void);
+extern void s3c2442_init_clocks(int xtal);
 extern void s3c2442_init_irq(void);
 #else
 #define s3c2442_init NULL
@@ -114,4 +114,21 @@ extern struct platform_device s3c2412_device_dma;
 extern struct platform_device s3c2440_device_dma;
 extern struct platform_device s3c2443_device_dma;
 
+extern struct platform_device s3c2410_device_dclk;
+
+#ifdef CONFIG_S3C2410_COMMON_CLK
+void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    int current_soc,
+				    void __iomem *reg_base);
+#endif
+#ifdef CONFIG_S3C2412_COMMON_CLK
+void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
+				unsigned long ext_f, void __iomem *reg_base);
+#endif
+#ifdef CONFIG_S3C2443_COMMON_CLK
+void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    int current_soc,
+				    void __iomem *reg_base);
+#endif
+
 #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */

arch/arm/mach-s3c24xx/cpufreq-utils.c

@@ -14,6 +14,7 @@
 #include <linux/errno.h>
 #include <linux/cpufreq.h>
 #include <linux/io.h>
+#include <linux/clk.h>
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
@@ -60,5 +61,6 @@ void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
  */
 void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
 {
-	__raw_writel(cfg->pll.driver_data, S3C2410_MPLLCON);
+	if (!IS_ERR(cfg->mpll))
+		clk_set_rate(cfg->mpll, cfg->pll.frequency);
 }

arch/arm/mach-s3c24xx/include/mach/regs-clock.h

@@ -42,24 +42,6 @@
 #define S3C2410_CLKCON_IIS	     (1<<17)
 #define S3C2410_CLKCON_SPI	     (1<<18)
 
-/* DCLKCON register addresses in gpio.h */
-
-#define S3C2410_DCLKCON_DCLK0EN	     (1<<0)
-#define S3C2410_DCLKCON_DCLK0_PCLK   (0<<1)
-#define S3C2410_DCLKCON_DCLK0_UCLK   (1<<1)
-#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
-#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
-
-#define S3C2410_DCLKCON_DCLK1EN	     (1<<16)
-#define S3C2410_DCLKCON_DCLK1_PCLK   (0<<17)
-#define S3C2410_DCLKCON_DCLK1_UCLK   (1<<17)
-#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
-#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
-
 #define S3C2410_CLKDIVN_PDIVN	     (1<<0)
 #define S3C2410_CLKDIVN_HDIVN	     (1<<1)
 

arch/arm/mach-s3c24xx/include/mach/regs-gpio.h

@@ -457,9 +457,6 @@
 
 /* miscellaneous control */
 #define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
-#define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
-
-#define S3C24XX_DCLKCON	   S3C24XX_GPIOREG2(0x84)
 
 /* see clock.h for dclk definitions */
 

arch/arm/mach-s3c24xx/mach-amlm5900.c

@@ -161,11 +161,16 @@ static struct platform_device *amlm5900_devices[] __initdata = {
 static void __init amlm5900_map_io(void)
 {
 	s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init amlm5900_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 #ifdef CONFIG_FB_S3C2410
 static struct s3c2410fb_display __initdata amlm5900_lcd_info = {
 	.width		= 160,
@@ -241,6 +246,6 @@ MACHINE_START(AML_M5900, "AML_M5900")
 	.map_io		= amlm5900_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= amlm5900_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= amlm5900_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-anubis.c

@@ -46,7 +46,6 @@
 
 #include <net/ax88796.h>
 
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
@@ -352,6 +351,7 @@ static struct platform_device anubis_device_sm501 = {
 /* Standard Anubis devices */
 
 static struct platform_device *anubis_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_adc,
@@ -364,14 +364,6 @@ static struct platform_device *anubis_devices[] __initdata = {
 	&anubis_device_sm501,
 };
 
-static struct clk *anubis_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
 /* I2C devices. */
 
 static struct i2c_board_info anubis_i2c_devs[] __initdata = {
@@ -394,23 +386,7 @@ static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
 
 static void __init anubis_map_io(void)
 {
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = &clk_upll;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
-
 	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -428,6 +404,12 @@ static void __init anubis_map_io(void)
 	}
 }
 
+static void __init anubis_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init anubis_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -447,6 +429,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.map_io		= anubis_map_io,
 	.init_machine	= anubis_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= anubis_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-at2440evb.c

@@ -45,7 +45,6 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/mmc-s3cmci.h>
@@ -192,11 +191,16 @@ static struct platform_device *at2440evb_devices[] __initdata = {
 static void __init at2440evb_map_io(void)
 {
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
-	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init at2440evb_init_time(void)
+{
+	s3c2440_init_clocks(16934400);
+	samsung_timer_init();
+}
+
 static void __init at2440evb_init(void)
 {
 	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
@@ -213,6 +217,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.map_io		= at2440evb_map_io,
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= at2440evb_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-bast.c

@@ -51,7 +51,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
 #include <plat/devs.h>
@@ -523,6 +522,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = {
 // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 
 static struct platform_device *bast_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
@@ -537,14 +537,6 @@ static struct platform_device *bast_devices[] __initdata = {
 	&bast_sio,
 };
 
-static struct clk *bast_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
 static struct s3c_cpufreq_board __initdata bast_cpufreq = {
 	.refresh	= 7800, /* 7.8usec */
 	.auto_io	= 1,
@@ -558,29 +550,19 @@ static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
 
 static void __init bast_map_io(void)
 {
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = &clk_upll;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
-
 	s3c_hwmon_set_platdata(&bast_hwmon_info);
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init bast_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init bast_init(void)
 {
 	register_syscore_ops(&bast_pm_syscore_ops);
@@ -608,6 +590,6 @@ MACHINE_START(BAST, "Simtec-BAST")
 	.map_io		= bast_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= bast_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= bast_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-gta02.c

@@ -501,7 +501,6 @@ static struct platform_device gta02_buttons_device = {
 static void __init gta02_map_io(void)
 {
 	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
@@ -585,6 +584,11 @@ static void __init gta02_machine_init(void)
 	regulator_has_full_constraints();
 }
 
+static void __init gta02_init_time(void)
+{
+	s3c2442_init_clocks(12000000);
+	samsung_timer_init();
+}
 
 MACHINE_START(NEO1973_GTA02, "GTA02")
 	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
@@ -592,6 +596,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.map_io		= gta02_map_io,
 	.init_irq	= s3c2442_init_irq,
 	.init_machine	= gta02_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= gta02_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-h1940.c

@@ -57,7 +57,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
@@ -646,7 +645,6 @@ static struct platform_device *h1940_devices[] __initdata = {
 static void __init h1940_map_io(void)
 {
 	s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -662,6 +660,12 @@ static void __init h1940_map_io(void)
 	WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
 }
 
+static void __init h1940_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 /* H1940 and RX3715 need to reserve this for suspend */
 static void __init h1940_reserve(void)
 {
@@ -739,6 +743,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
 	.reserve	= h1940_reserve,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= h1940_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= h1940_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-jive.c

@@ -507,11 +507,16 @@ static struct syscore_ops jive_pm_syscore_ops = {
 static void __init jive_map_io(void)
 {
 	s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init jive_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void jive_power_off(void)
 {
 	printk(KERN_INFO "powering system down...\n");
@@ -665,6 +670,6 @@ MACHINE_START(JIVE, "JIVE")
 	.init_irq	= s3c2412_init_irq,
 	.map_io		= jive_map_io,
 	.init_machine	= jive_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= jive_init_time,
 	.restart	= s3c2412_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-mini2440.c

@@ -54,7 +54,6 @@
 #include <linux/mtd/partitions.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/samsung-time.h>
@@ -525,11 +524,16 @@ static struct platform_device *mini2440_devices[] __initdata = {
 static void __init mini2440_map_io(void)
 {
 	s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init mini2440_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 /*
  * mini2440_features string
  *
@@ -690,6 +694,6 @@ MACHINE_START(MINI2440, "MINI2440")
 	.map_io		= mini2440_map_io,
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= mini2440_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-n30.c

@@ -45,7 +45,6 @@
 
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <linux/platform_data/mmc-s3cmci.h>
@@ -535,11 +534,16 @@ static void __init n30_map_io(void)
 {
 	s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
 	n30_hwinit();
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init n30_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 /* GPB3 is the line that controls the pull-up for the USB D+ line */
 
 static void __init n30_init(void)
@@ -591,7 +595,7 @@ MACHINE_START(N30, "Acer-N30")
 				Ben Dooks <ben-linux@fluff.org>
 	*/
 	.atag_offset	= 0x100,
-	.init_time	= samsung_timer_init,
+	.init_time	= n30_init_time,
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
 	.map_io		= n30_map_io,
@@ -602,7 +606,7 @@ MACHINE_START(N35, "Acer-N35")
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>
 	*/
 	.atag_offset	= 0x100,
-	.init_time	= samsung_timer_init,
+	.init_time	= n30_init_time,
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
 	.map_io		= n30_map_io,

arch/arm/mach-s3c24xx/mach-nexcoder.c

@@ -42,7 +42,6 @@
 #include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/samsung-time.h>
@@ -135,13 +134,18 @@ static void __init nexcoder_sensorboard_init(void)
 static void __init nexcoder_map_io(void)
 {
 	s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
 	nexcoder_sensorboard_init();
 }
 
+static void __init nexcoder_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init nexcoder_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -154,6 +158,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.map_io		= nexcoder_map_io,
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= nexcoder_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-osiris.c

@@ -40,7 +40,6 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
 #include <plat/devs.h>
@@ -344,20 +343,13 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = {
 /* Standard Osiris devices */
 
 static struct platform_device *osiris_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_i2c0,
 	&s3c_device_wdt,
 	&s3c_device_nand,
 	&osiris_pcmcia,
 };
 
-static struct clk *osiris_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
 static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
 	.refresh	= 7800, /* refresh period is 7.8usec */
 	.auto_io	= 1,
@@ -368,23 +360,7 @@ static void __init osiris_map_io(void)
 {
 	unsigned long flags;
 
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = &clk_upll;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
-
 	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -408,6 +384,12 @@ static void __init osiris_map_io(void)
 	local_irq_restore(flags);
 }
 
+static void __init osiris_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init osiris_init(void)
 {
 	register_syscore_ops(&osiris_pm_syscore_ops);
@@ -429,6 +411,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.map_io		= osiris_map_io,
 	.init_irq	= s3c2440_init_irq,
 	.init_machine	= osiris_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= osiris_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-otom.c

@@ -30,7 +30,6 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/samsung-time.h>
@@ -100,11 +99,16 @@ static struct platform_device *otom11_devices[] __initdata = {
 static void __init otom11_map_io(void)
 {
 	s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init otom11_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init otom11_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -117,6 +121,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	.map_io		= otom11_map_io,
 	.init_machine	= otom11_init,
 	.init_irq	= s3c2410_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= otom11_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-qt2410.c

@@ -304,11 +304,16 @@ __setup("tft=", qt2410_tft_setup);
 static void __init qt2410_map_io(void)
 {
 	s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
-	s3c24xx_init_clocks(12*1000*1000);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init qt2410_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init qt2410_machine_init(void)
 {
 	s3c_nand_set_platdata(&qt2410_nand_info);
@@ -346,6 +351,6 @@ MACHINE_START(QT2410, "QT2410")
 	.map_io		= qt2410_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= qt2410_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= qt2410_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -54,7 +54,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
@@ -710,6 +709,7 @@ static struct i2c_board_info rx1950_i2c_devices[] = {
 };
 
 static struct platform_device *rx1950_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
@@ -728,20 +728,9 @@ static struct platform_device *rx1950_devices[] __initdata = {
 	&rx1950_leds,
 };
 
-static struct clk *rx1950_clocks[] __initdata = {
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-};
-
 static void __init rx1950_map_io(void)
 {
-	s3c24xx_clkout0.parent  = &clk_h;
-	s3c24xx_clkout1.parent  = &clk_f;
-
-	s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
-
 	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
-	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -754,6 +743,12 @@ static void __init rx1950_map_io(void)
 	s3c_pm_init();
 }
 
+static void __init rx1950_init_time(void)
+{
+	s3c2442_init_clocks(16934000);
+	samsung_timer_init();
+}
+
 static void __init rx1950_init_machine(void)
 {
 	int i;
@@ -816,6 +811,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
 	.reserve	= rx1950_reserve,
 	.init_irq	= s3c2442_init_irq,
 	.init_machine = rx1950_init_machine,
-	.init_time	= samsung_timer_init,
+	.init_time	= rx1950_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-rx3715.c

@@ -46,7 +46,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
@@ -179,11 +178,16 @@ static struct platform_device *rx3715_devices[] __initdata = {
 static void __init rx3715_map_io(void)
 {
 	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
-	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init rx3715_init_time(void)
+{
+	s3c2440_init_clocks(16934000);
+	samsung_timer_init();
+}
+
 /* H1940 and RX3715 need to reserve this for suspend */
 static void __init rx3715_reserve(void)
 {
@@ -210,6 +214,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.reserve	= rx3715_reserve,
 	.init_irq	= s3c2440_init_irq,
 	.init_machine	= rx3715_init_machine,
-	.init_time	= samsung_timer_init,
+	.init_time	= rx3715_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-s3c2416-dt.c

@@ -18,7 +18,6 @@
 #include <linux/clocksource.h>
 #include <linux/irqchip.h>
 #include <linux/of_platform.h>
-#include <linux/serial_core.h>
 #include <linux/serial_s3c.h>
 
 #include <asm/mach/arch.h>
@@ -29,48 +28,14 @@
 
 #include "common.h"
 
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the S3C2416 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART,
-				"s3c2440-uart.0", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000,
-				"s3c2440-uart.1", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000,
-				"s3c2440-uart.2", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000,
-				"s3c2440-uart.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0,
-				"s3c-sdhci.0", NULL),
-	OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1,
-				"s3c-sdhci.1", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC,
-				"s3c2440-i2c.0", NULL),
-	{},
-};
-
 static void __init s3c2416_dt_map_io(void)
 {
 	s3c24xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
 }
 
 static void __init s3c2416_dt_machine_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table,
-				s3c2416_auxdata_lookup, NULL);
-
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	s3c_pm_init();
 }
 
@@ -86,6 +51,5 @@ DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)")
 	.map_io		= s3c2416_dt_map_io,
 	.init_irq	= irqchip_init,
 	.init_machine	= s3c2416_dt_machine_init,
-	 .init_time	= clocksource_of_init,
 	.restart	= s3c2416_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2410.c

@@ -99,11 +99,16 @@ static struct platform_device *smdk2410_devices[] __initdata = {
 static void __init smdk2410_map_io(void)
 {
 	s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2410_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2410_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -118,6 +123,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
 	.map_io		= smdk2410_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= smdk2410_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2410_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2413.c

@@ -106,11 +106,16 @@ static void __init smdk2413_fixup(struct tag *tags, char **cmdline,
 static void __init smdk2413_map_io(void)
 {
 	s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2413_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2413_machine_init(void)
 {	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
@@ -159,6 +164,6 @@ MACHINE_START(SMDK2413, "SMDK2413")
 	.init_irq	= s3c2412_init_irq,
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2413_init_time,
 	.restart	= s3c2412_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2416.c

@@ -219,10 +219,15 @@ static struct platform_device *smdk2416_devices[] __initdata = {
 	&s3c2443_device_dma,
 };
 
+static void __init smdk2416_init_time(void)
+{
+	s3c2416_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2416_map_io(void)
 {
 	s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
@@ -257,6 +262,6 @@ MACHINE_START(SMDK2416, "SMDK2416")
 	.init_irq	= s3c2416_init_irq,
 	.map_io		= smdk2416_map_io,
 	.init_machine	= smdk2416_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2416_init_time,
 	.restart	= s3c2416_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2440.c

@@ -38,7 +38,6 @@
 #include <mach/fb.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/samsung-time.h>
@@ -159,11 +158,16 @@ static struct platform_device *smdk2440_devices[] __initdata = {
 static void __init smdk2440_map_io(void)
 {
 	s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
-	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2440_init_time(void)
+{
+	s3c2440_init_clocks(16934400);
+	samsung_timer_init();
+}
+
 static void __init smdk2440_machine_init(void)
 {
 	s3c24xx_fb_set_platdata(&smdk2440_fb_info);
@@ -180,6 +184,6 @@ MACHINE_START(S3C2440, "SMDK2440")
 	.init_irq	= s3c2440_init_irq,
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2440_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2443.c

@@ -121,11 +121,16 @@ static struct platform_device *smdk2443_devices[] __initdata = {
 static void __init smdk2443_map_io(void)
 {
 	s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2443_init_time(void)
+{
+	s3c2443_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2443_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -145,6 +150,6 @@ MACHINE_START(SMDK2443, "SMDK2443")
 	.init_irq	= s3c2443_init_irq,
 	.map_io		= smdk2443_map_io,
 	.init_machine	= smdk2443_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2443_init_time,
 	.restart	= s3c2443_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-tct_hammer.c

@@ -135,11 +135,16 @@ static struct platform_device *tct_hammer_devices[] __initdata = {
 static void __init tct_hammer_map_io(void)
 {
 	s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init tct_hammer_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init tct_hammer_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -151,6 +156,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
 	.map_io		= tct_hammer_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= tct_hammer_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= tct_hammer_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-vr1000.c

@@ -43,7 +43,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/samsung-time.h>
@@ -286,6 +285,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
 /* devices for this board */
 
 static struct platform_device *vr1000_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
@@ -299,14 +299,6 @@ static struct platform_device *vr1000_devices[] __initdata = {
 	&vr1000_led3,
 };
 
-static struct clk *vr1000_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
 static void vr1000_power_off(void)
 {
 	gpio_direction_output(S3C2410_GPB(9), 1);
@@ -314,29 +306,19 @@ static void vr1000_power_off(void)
 
 static void __init vr1000_map_io(void)
 {
-	/* initialise clock sources */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = NULL;
-	s3c24xx_dclk1.rate   = 3692307;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks));
-
 	pm_power_off = vr1000_power_off;
 
 	s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init vr1000_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init vr1000_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -357,6 +339,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
 	.map_io		= vr1000_map_io,
 	.init_machine	= vr1000_init,
 	.init_irq	= s3c2410_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= vr1000_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-vstms.c

@@ -142,11 +142,16 @@ static void __init vstms_fixup(struct tag *tags, char **cmdline,
 static void __init vstms_map_io(void)
 {
 	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init vstms_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init vstms_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -162,6 +167,6 @@ MACHINE_START(VSTMS, "VSTMS")
 	.init_irq	= s3c2412_init_irq,
 	.init_machine	= vstms_init,
 	.map_io		= vstms_map_io,
-	.init_time	= samsung_timer_init,
+	.init_time	= vstms_init_time,
 	.restart	= s3c2412_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/pm.c

@@ -51,9 +51,6 @@
 #define PFX "s3c24xx-pm: "
 
 static struct sleep_save core_save[] = {
-	SAVE_ITEM(S3C2410_LOCKTIME),
-	SAVE_ITEM(S3C2410_CLKCON),
-
 	/* we restore the timings here, with the proviso that the board
 	 * brings the system up in an slower, or equal frequency setting
 	 * to the original system.
@@ -69,18 +66,6 @@ static struct sleep_save core_save[] = {
 	SAVE_ITEM(S3C2410_BANKCON3),
 	SAVE_ITEM(S3C2410_BANKCON4),
 	SAVE_ITEM(S3C2410_BANKCON5),
-
-#ifndef CONFIG_CPU_FREQ
-	SAVE_ITEM(S3C2410_CLKDIVN),
-	SAVE_ITEM(S3C2410_MPLLCON),
-	SAVE_ITEM(S3C2410_REFRESH),
-#endif
-	SAVE_ITEM(S3C2410_UPLLCON),
-	SAVE_ITEM(S3C2410_CLKSLOW),
-};
-
-static struct sleep_save misc_save[] = {
-	SAVE_ITEM(S3C2410_DCLKCON),
 };
 
 /* s3c_pm_check_resume_pin
@@ -140,12 +125,10 @@ void s3c_pm_configure_extint(void)
 void s3c_pm_restore_core(void)
 {
 	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
-	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
 }
 
 void s3c_pm_save_core(void)
 {
-	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
 	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
 }
 

arch/arm/mach-s3c24xx/s3c2410.c

@@ -85,62 +85,6 @@ void __init s3c2410_map_io(void)
 
 void __init_or_cpufreq s3c2410_setup_clocks(void)
 {
-	struct clk *xtal_clk;
-	unsigned long tmp;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
-
-	tmp = __raw_readl(S3C2410_CLKDIVN);
-
-	/* work out clock scalings */
-
-	hclk = fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1);
-	pclk = hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brieft summary of clocks, etc */
-
-	printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them
-	 */
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-/* fake ARMCLK for use with cpufreq, etc. */
-
-static struct clk s3c2410_armclk = {
-	.name	= "armclk",
-	.parent	= &clk_f,
-	.id	= -1,
-};
-
-static struct clk_lookup s3c2410_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-};
-
-void __init s3c2410_init_clocks(int xtal)
-{
-	s3c24xx_register_baseclocks(xtal);
-	s3c2410_setup_clocks();
-	s3c2410_baseclk_add();
-	s3c24xx_register_clock(&s3c2410_armclk);
-	clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup));
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
 
 struct bus_type s3c2410_subsys = {

arch/arm/mach-s3c24xx/s3c2412.c

@@ -173,49 +173,6 @@ void __init s3c2412_map_io(void)
 
 void __init_or_cpufreq s3c2412_setup_clocks(void)
 {
-	struct clk *xtal_clk;
-	unsigned long tmp;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
-
-	clk_mpll.rate = fclk;
-
-	tmp = __raw_readl(S3C2410_CLKDIVN);
-
-	/* work out clock scalings */
-
-	hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1);
-	hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1);
-	pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brieft summary of clocks, etc */
-
-	printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c2412_init_clocks(int xtal)
-{
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them
-	 */
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c2412_setup_clocks();
-	s3c2412_baseclk_add();
 }
 
 /* need to register the subsystem before we actually register the device, and

arch/arm/mach-s3c24xx/s3c2442.c

@@ -53,117 +53,6 @@
 
 #include "common.h"
 
-/* S3C2442 extended clock support */
-
-static unsigned long s3c2442_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	div = parent_rate / rate;
-
-	if (div == 3)
-		return parent_rate / 3;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div /= 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2442_camif_upll_round(clk, rate);
-
-	camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
-
-	if (rate == parent_rate) {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
-	} else if ((parent_rate / rate) == 3) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
-	} else {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-/* Extra S3C2442 clocks */
-
-static struct clk s3c2442_clk_cam = {
-	.name		= "camif",
-	.id		= -1,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2442_clk_cam_upll = {
-	.name		= "camif-upll",
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.set_rate	= s3c2442_camif_upll_setrate,
-		.round_rate	= s3c2442_camif_upll_round,
-	},
-};
-
-static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *clock_upll;
-	struct clk *clock_h;
-	struct clk *clock_p;
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	s3c2442_clk_cam.parent = clock_h;
-	s3c2442_clk_cam_upll.parent = clock_upll;
-
-	s3c24xx_register_clock(&s3c2442_clk_cam);
-	s3c24xx_register_clock(&s3c2442_clk_cam_upll);
-
-	clk_disable(&s3c2442_clk_cam);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2442_clk_interface = {
-	.name		= "s3c2442_clk",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2442_clk_add,
-};
-
-static __init int s3c2442_clk_init(void)
-{
-	return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
-
-
 static struct device s3c2442_dev = {
 	.bus		= &s3c2442_subsys,
 };

arch/arm/mach-s3c24xx/s3c244x.c

@@ -46,6 +46,7 @@
 #include <plat/nand-core.h>
 #include <plat/watchdog-reset.h>
 
+#include "common.h"
 #include "regs-dsc.h"
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
@@ -74,67 +75,11 @@ void __init s3c244x_map_io(void)
 	s3c_nand_setname("s3c2440-nand");
 	s3c_device_ts.name = "s3c2440-ts";
 	s3c_device_usbgadget.name = "s3c2440-usbgadget";
+	s3c2410_device_dclk.name = "s3c2440-dclk";
 }
 
 void __init_or_cpufreq s3c244x_setup_clocks(void)
 {
-	struct clk *xtal_clk;
-	unsigned long clkdiv;
-	unsigned long camdiv;
-	unsigned long xtal;
-	unsigned long hclk, fclk, pclk;
-	int hdiv = 1;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
-
-	clkdiv = __raw_readl(S3C2410_CLKDIVN);
-	camdiv = __raw_readl(S3C2440_CAMDIVN);
-
-	/* work out clock scalings */
-
-	switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
-	case S3C2440_CLKDIVN_HDIVN_1:
-		hdiv = 1;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_2:
-		hdiv = 2;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_4_8:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_3_6:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
-		break;
-	}
-
-	hclk = fclk / hdiv;
-	pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brief summary of clocks, etc */
-
-	printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c244x_init_clocks(int xtal)
-{
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them, and to add new ones after the initialisation
-	 */
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c244x_setup_clocks();
-	s3c2410_baseclk_add();
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
 
 /* Since the S3C2442 and S3C2440 share items, put both subsystems here */

arch/arm/plat-samsung/include/plat/cpu-freq-core.h

@@ -119,6 +119,7 @@ struct s3c_plltab {
 struct s3c_cpufreq_config {
 	struct s3c_freq		freq;
 	struct s3c_freq		max;
+	struct clk		*mpll;
 	struct cpufreq_frequency_table pll;
 	struct s3c_clkdivs	divs;
 	struct s3c_cpufreq_info *info;	/* for core, not drivers */

drivers/clk/Kconfig

@@ -115,3 +115,5 @@ endmenu
 
 source "drivers/clk/bcm/Kconfig"
 source "drivers/clk/mvebu/Kconfig"
+
+source "drivers/clk/samsung/Kconfig"

drivers/clk/Makefile

@@ -41,7 +41,7 @@ obj-$(CONFIG_PLAT_ORION)		+= mvebu/
 obj-$(CONFIG_ARCH_MXS)			+= mxs/
 obj-$(CONFIG_COMMON_CLK_QCOM)		+= qcom/
 obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/
-obj-$(CONFIG_PLAT_SAMSUNG)		+= samsung/
+obj-$(CONFIG_COMMON_CLK_SAMSUNG)	+= samsung/
 obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= shmobile/
 obj-$(CONFIG_ARCH_SIRF)			+= sirf/
 obj-$(CONFIG_ARCH_SOCFPGA)		+= socfpga/

drivers/clk/samsung/Kconfig

@@ -0,0 +1,26 @@
+config COMMON_CLK_SAMSUNG
+	bool
+	select COMMON_CLK
+
+config S3C2410_COMMON_CLK
+	bool
+	select COMMON_CLK_SAMSUNG
+	help
+	  Build the s3c2410 clock driver based on the common clock framework.
+
+config S3C2410_COMMON_DCLK
+	bool
+	select COMMON_CLK_SAMSUNG
+	select REGMAP_MMIO
+	help
+	  Temporary symbol to build the dclk driver based on the common clock
+	  framework.
+
+config S3C2412_COMMON_CLK
+	bool
+	select COMMON_CLK_SAMSUNG
+
+config S3C2443_COMMON_CLK
+	bool
+	select COMMON_CLK_SAMSUNG
+

drivers/clk/samsung/Makefile

@@ -3,9 +3,15 @@
 #
 
 obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-pll.o
+obj-$(CONFIG_SOC_EXYNOS3250)	+= clk-exynos3250.o
 obj-$(CONFIG_ARCH_EXYNOS4)	+= clk-exynos4.o
 obj-$(CONFIG_SOC_EXYNOS5250)	+= clk-exynos5250.o
+obj-$(CONFIG_SOC_EXYNOS5260)	+= clk-exynos5260.o
 obj-$(CONFIG_SOC_EXYNOS5420)	+= clk-exynos5420.o
 obj-$(CONFIG_SOC_EXYNOS5440)	+= clk-exynos5440.o
 obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-audss.o
+obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
+obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
+obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
+obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o
 obj-$(CONFIG_ARCH_S3C64XX)	+= clk-s3c64xx.o

drivers/clk/samsung/clk-exynos3250.c

@@ -0,0 +1,780 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos3250 SoC.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/exynos3250.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define SRC_LEFTBUS		0x4200
+#define DIV_LEFTBUS		0x4500
+#define GATE_IP_LEFTBUS		0x4800
+#define SRC_RIGHTBUS		0x8200
+#define DIV_RIGHTBUS		0x8500
+#define GATE_IP_RIGHTBUS	0x8800
+#define GATE_IP_PERIR		0x8960
+#define MPLL_LOCK		0xc010
+#define MPLL_CON0		0xc110
+#define VPLL_LOCK		0xc020
+#define VPLL_CON0		0xc120
+#define UPLL_LOCK		0xc030
+#define UPLL_CON0		0xc130
+#define SRC_TOP0		0xc210
+#define SRC_TOP1		0xc214
+#define SRC_CAM			0xc220
+#define SRC_MFC			0xc228
+#define SRC_G3D			0xc22c
+#define SRC_LCD			0xc234
+#define SRC_ISP			0xc238
+#define SRC_FSYS		0xc240
+#define SRC_PERIL0		0xc250
+#define SRC_PERIL1		0xc254
+#define SRC_MASK_TOP		0xc310
+#define SRC_MASK_CAM		0xc320
+#define SRC_MASK_LCD		0xc334
+#define SRC_MASK_ISP		0xc338
+#define SRC_MASK_FSYS		0xc340
+#define SRC_MASK_PERIL0		0xc350
+#define SRC_MASK_PERIL1		0xc354
+#define DIV_TOP			0xc510
+#define DIV_CAM			0xc520
+#define DIV_MFC			0xc528
+#define DIV_G3D			0xc52c
+#define DIV_LCD			0xc534
+#define DIV_ISP			0xc538
+#define DIV_FSYS0		0xc540
+#define DIV_FSYS1		0xc544
+#define DIV_FSYS2		0xc548
+#define DIV_PERIL0		0xc550
+#define DIV_PERIL1		0xc554
+#define DIV_PERIL3		0xc55c
+#define DIV_PERIL4		0xc560
+#define DIV_PERIL5		0xc564
+#define DIV_CAM1		0xc568
+#define CLKDIV2_RATIO		0xc580
+#define GATE_SCLK_CAM		0xc820
+#define GATE_SCLK_MFC		0xc828
+#define GATE_SCLK_G3D		0xc82c
+#define GATE_SCLK_LCD		0xc834
+#define GATE_SCLK_ISP_TOP	0xc838
+#define GATE_SCLK_FSYS		0xc840
+#define GATE_SCLK_PERIL		0xc850
+#define GATE_IP_CAM		0xc920
+#define GATE_IP_MFC		0xc928
+#define GATE_IP_G3D		0xc92c
+#define GATE_IP_LCD		0xc934
+#define GATE_IP_ISP		0xc938
+#define GATE_IP_FSYS		0xc940
+#define GATE_IP_PERIL		0xc950
+#define GATE_BLOCK		0xc970
+#define APLL_LOCK		0x14000
+#define APLL_CON0		0x14100
+#define SRC_CPU			0x14200
+#define DIV_CPU0		0x14500
+#define DIV_CPU1		0x14504
+
+/* list of PLLs to be registered */
+enum exynos3250_plls {
+	apll, mpll, vpll, upll,
+	nr_plls
+};
+
+static void __iomem *reg_base;
+
+/*
+ * Support for CMU save/restore across system suspends
+ */
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *exynos3250_clk_regs;
+
+static unsigned long exynos3250_cmu_clk_regs[] __initdata = {
+	SRC_LEFTBUS,
+	DIV_LEFTBUS,
+	GATE_IP_LEFTBUS,
+	SRC_RIGHTBUS,
+	DIV_RIGHTBUS,
+	GATE_IP_RIGHTBUS,
+	GATE_IP_PERIR,
+	MPLL_LOCK,
+	MPLL_CON0,
+	VPLL_LOCK,
+	VPLL_CON0,
+	UPLL_LOCK,
+	UPLL_CON0,
+	SRC_TOP0,
+	SRC_TOP1,
+	SRC_CAM,
+	SRC_MFC,
+	SRC_G3D,
+	SRC_LCD,
+	SRC_ISP,
+	SRC_FSYS,
+	SRC_PERIL0,
+	SRC_PERIL1,
+	SRC_MASK_TOP,
+	SRC_MASK_CAM,
+	SRC_MASK_LCD,
+	SRC_MASK_ISP,
+	SRC_MASK_FSYS,
+	SRC_MASK_PERIL0,
+	SRC_MASK_PERIL1,
+	DIV_TOP,
+	DIV_CAM,
+	DIV_MFC,
+	DIV_G3D,
+	DIV_LCD,
+	DIV_ISP,
+	DIV_FSYS0,
+	DIV_FSYS1,
+	DIV_FSYS2,
+	DIV_PERIL0,
+	DIV_PERIL1,
+	DIV_PERIL3,
+	DIV_PERIL4,
+	DIV_PERIL5,
+	DIV_CAM1,
+	CLKDIV2_RATIO,
+	GATE_SCLK_CAM,
+	GATE_SCLK_MFC,
+	GATE_SCLK_G3D,
+	GATE_SCLK_LCD,
+	GATE_SCLK_ISP_TOP,
+	GATE_SCLK_FSYS,
+	GATE_SCLK_PERIL,
+	GATE_IP_CAM,
+	GATE_IP_MFC,
+	GATE_IP_G3D,
+	GATE_IP_LCD,
+	GATE_IP_ISP,
+	GATE_IP_FSYS,
+	GATE_IP_PERIL,
+	GATE_BLOCK,
+	APLL_LOCK,
+	SRC_CPU,
+	DIV_CPU0,
+	DIV_CPU1,
+};
+
+static int exynos3250_clk_suspend(void)
+{
+	samsung_clk_save(reg_base, exynos3250_clk_regs,
+				ARRAY_SIZE(exynos3250_cmu_clk_regs));
+	return 0;
+}
+
+static void exynos3250_clk_resume(void)
+{
+	samsung_clk_restore(reg_base, exynos3250_clk_regs,
+				ARRAY_SIZE(exynos3250_cmu_clk_regs));
+}
+
+static struct syscore_ops exynos3250_clk_syscore_ops = {
+	.suspend = exynos3250_clk_suspend,
+	.resume = exynos3250_clk_resume,
+};
+
+static void exynos3250_clk_sleep_init(void)
+{
+	exynos3250_clk_regs =
+		samsung_clk_alloc_reg_dump(exynos3250_cmu_clk_regs,
+					   ARRAY_SIZE(exynos3250_cmu_clk_regs));
+	if (!exynos3250_clk_regs) {
+		pr_warn("%s: Failed to allocate sleep save data\n", __func__);
+		goto err;
+	}
+
+	register_syscore_ops(&exynos3250_clk_syscore_ops);
+	return;
+err:
+	kfree(exynos3250_clk_regs);
+}
+#else
+static inline void exynos3250_clk_sleep_init(void) { }
+#endif
+
+/* list of all parent clock list */
+PNAME(mout_vpllsrc_p)		= { "fin_pll", };
+
+PNAME(mout_apll_p)		= { "fin_pll", "fout_apll", };
+PNAME(mout_mpll_p)		= { "fin_pll", "fout_mpll", };
+PNAME(mout_vpll_p)		= { "fin_pll", "fout_vpll", };
+PNAME(mout_upll_p)		= { "fin_pll", "fout_upll", };
+
+PNAME(mout_mpll_user_p)		= { "fin_pll", "div_mpll_pre", };
+PNAME(mout_epll_user_p)		= { "fin_pll", "mout_epll", };
+PNAME(mout_core_p)		= { "mout_apll", "mout_mpll_user_c", };
+PNAME(mout_hpm_p)		= { "mout_apll", "mout_mpll_user_c", };
+
+PNAME(mout_ebi_p)		= { "div_aclk_200", "div_aclk_160", };
+PNAME(mout_ebi_1_p)		= { "mout_ebi", "mout_vpll", };
+
+PNAME(mout_gdl_p)		= { "mout_mpll_user_l", };
+PNAME(mout_gdr_p)		= { "mout_mpll_user_r", };
+
+PNAME(mout_aclk_400_mcuisp_sub_p)
+				= { "fin_pll", "div_aclk_400_mcuisp", };
+PNAME(mout_aclk_266_0_p)	= { "div_mpll_pre", "mout_vpll", };
+PNAME(mout_aclk_266_1_p)	= { "mout_epll_user", };
+PNAME(mout_aclk_266_p)		= { "mout_aclk_266_0", "mout_aclk_266_1", };
+PNAME(mout_aclk_266_sub_p)	= { "fin_pll", "div_aclk_266", };
+
+PNAME(group_div_mpll_pre_p)	= { "div_mpll_pre", };
+PNAME(group_epll_vpll_p)	= { "mout_epll_user", "mout_vpll" };
+PNAME(group_sclk_p)		= { "xxti", "xusbxti",
+				    "none", "none",
+				    "none", "none", "div_mpll_pre",
+				    "mout_epll_user", "mout_vpll", };
+PNAME(group_sclk_audio_p)	= { "audiocdclk", "none",
+				    "none", "none",
+				    "xxti", "xusbxti",
+				    "div_mpll_pre", "mout_epll_user",
+				    "mout_vpll", };
+PNAME(group_sclk_cam_blk_p)	= { "xxti", "xusbxti",
+				    "none", "none", "none",
+				    "none", "div_mpll_pre",
+				    "mout_epll_user", "mout_vpll",
+				    "div_cam_blk_320", };
+PNAME(group_sclk_fimd0_p)	= { "xxti", "xusbxti",
+				    "m_bitclkhsdiv4_2l", "none",
+				    "none", "none", "div_mpll_pre",
+				    "mout_epll_user", "mout_vpll",
+				    "none", "none", "none",
+				    "div_lcd_blk_145", };
+
+PNAME(mout_mfc_p)		= { "mout_mfc_0", "mout_mfc_1" };
+PNAME(mout_g3d_p)		= { "mout_g3d_0", "mout_g3d_1" };
+
+static struct samsung_fixed_factor_clock fixed_factor_clks[] __initdata = {
+	FFACTOR(0, "sclk_mpll_1600", "mout_mpll", 1, 1, 0),
+	FFACTOR(0, "sclk_mpll_mif", "mout_mpll", 1, 2, 0),
+	FFACTOR(0, "sclk_bpll", "fout_bpll", 1, 2, 0),
+	FFACTOR(0, "div_cam_blk_320", "sclk_mpll_1600", 1, 5, 0),
+	FFACTOR(0, "div_lcd_blk_145", "sclk_mpll_1600", 1, 11, 0),
+
+	/* HACK: fin_pll hardcoded to xusbxti until detection is implemented. */
+	FFACTOR(CLK_FIN_PLL, "fin_pll", "xusbxti", 1, 1, 0),
+};
+
+static struct samsung_mux_clock mux_clks[] __initdata = {
+	/*
+	 * NOTE: Following table is sorted by register address in ascending
+	 * order and then bitfield shift in descending order, as it is done
+	 * in the User's Manual. When adding new entries, please make sure
+	 * that the order is preserved, to avoid merge conflicts and make
+	 * further work with defined data easier.
+	 */
+
+	/* SRC_LEFTBUS */
+	MUX(CLK_MOUT_MPLL_USER_L, "mout_mpll_user_l", mout_mpll_user_p,
+	    SRC_LEFTBUS, 4, 1),
+	MUX(CLK_MOUT_GDL, "mout_gdl", mout_gdl_p, SRC_LEFTBUS, 0, 1),
+
+	/* SRC_RIGHTBUS */
+	MUX(CLK_MOUT_MPLL_USER_R, "mout_mpll_user_r", mout_mpll_user_p,
+	    SRC_RIGHTBUS, 4, 1),
+	MUX(CLK_MOUT_GDR, "mout_gdr", mout_gdr_p, SRC_RIGHTBUS, 0, 1),
+
+	/* SRC_TOP0 */
+	MUX(CLK_MOUT_EBI, "mout_ebi", mout_ebi_p, SRC_TOP0, 28, 1),
+	MUX(CLK_MOUT_ACLK_200, "mout_aclk_200", group_div_mpll_pre_p,SRC_TOP0, 24, 1),
+	MUX(CLK_MOUT_ACLK_160, "mout_aclk_160", group_div_mpll_pre_p, SRC_TOP0, 20, 1),
+	MUX(CLK_MOUT_ACLK_100, "mout_aclk_100", group_div_mpll_pre_p, SRC_TOP0, 16, 1),
+	MUX(CLK_MOUT_ACLK_266_1, "mout_aclk_266_1", mout_aclk_266_1_p, SRC_TOP0, 14, 1),
+	MUX(CLK_MOUT_ACLK_266_0, "mout_aclk_266_0", mout_aclk_266_0_p, SRC_TOP0, 13, 1),
+	MUX(CLK_MOUT_ACLK_266, "mout_aclk_266", mout_aclk_266_p, SRC_TOP0, 12, 1),
+	MUX(CLK_MOUT_VPLL, "mout_vpll", mout_vpll_p, SRC_TOP0, 8, 1),
+	MUX(CLK_MOUT_EPLL_USER, "mout_epll_user", mout_epll_user_p, SRC_TOP0, 4, 1),
+	MUX(CLK_MOUT_EBI_1, "mout_ebi_1", mout_ebi_1_p, SRC_TOP0, 0, 1),
+
+	/* SRC_TOP1 */
+	MUX(CLK_MOUT_UPLL, "mout_upll", mout_upll_p, SRC_TOP1, 28, 1),
+	MUX(CLK_MOUT_ACLK_400_MCUISP_SUB, "mout_aclk_400_mcuisp_sub", mout_aclk_400_mcuisp_sub_p,
+		SRC_TOP1, 24, 1),
+	MUX(CLK_MOUT_ACLK_266_SUB, "mout_aclk_266_sub", mout_aclk_266_sub_p, SRC_TOP1, 20, 1),
+	MUX(CLK_MOUT_MPLL, "mout_mpll", mout_mpll_p, SRC_TOP1, 12, 1),
+	MUX(CLK_MOUT_ACLK_400_MCUISP, "mout_aclk_400_mcuisp", group_div_mpll_pre_p, SRC_TOP1, 8, 1),
+	MUX(CLK_MOUT_VPLLSRC, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP1, 0, 1),
+
+	/* SRC_CAM */
+	MUX(CLK_MOUT_CAM1, "mout_cam1", group_sclk_p, SRC_CAM, 20, 4),
+	MUX(CLK_MOUT_CAM_BLK, "mout_cam_blk", group_sclk_cam_blk_p, SRC_CAM, 0, 4),
+
+	/* SRC_MFC */
+	MUX(CLK_MOUT_MFC, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1),
+	MUX(CLK_MOUT_MFC_1, "mout_mfc_1", group_epll_vpll_p, SRC_MFC, 4, 1),
+	MUX(CLK_MOUT_MFC_0, "mout_mfc_0", group_div_mpll_pre_p, SRC_MFC, 0, 1),
+
+	/* SRC_G3D */
+	MUX(CLK_MOUT_G3D, "mout_g3d", mout_g3d_p, SRC_G3D, 8, 1),
+	MUX(CLK_MOUT_G3D_1, "mout_g3d_1", group_epll_vpll_p, SRC_G3D, 4, 1),
+	MUX(CLK_MOUT_G3D_0, "mout_g3d_0", group_div_mpll_pre_p, SRC_G3D, 0, 1),
+
+	/* SRC_LCD */
+	MUX(CLK_MOUT_MIPI0, "mout_mipi0", group_sclk_p, SRC_LCD, 12, 4),
+	MUX(CLK_MOUT_FIMD0, "mout_fimd0", group_sclk_fimd0_p, SRC_LCD, 0, 4),
+
+	/* SRC_ISP */
+	MUX(CLK_MOUT_UART_ISP, "mout_uart_isp", group_sclk_p, SRC_ISP, 12, 4),
+	MUX(CLK_MOUT_SPI1_ISP, "mout_spi1_isp", group_sclk_p, SRC_ISP, 8, 4),
+	MUX(CLK_MOUT_SPI0_ISP, "mout_spi0_isp", group_sclk_p, SRC_ISP, 4, 4),
+
+	/* SRC_FSYS */
+	MUX(CLK_MOUT_TSADC, "mout_tsadc", group_sclk_p, SRC_FSYS, 28, 4),
+	MUX(CLK_MOUT_MMC1, "mout_mmc1", group_sclk_p, SRC_FSYS, 4, 3),
+	MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 3),
+
+	/* SRC_PERIL0 */
+	MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4),
+	MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4),
+
+	/* SRC_PERIL1 */
+	MUX(CLK_MOUT_SPI1, "mout_spi1", group_sclk_p, SRC_PERIL1, 20, 4),
+	MUX(CLK_MOUT_SPI0, "mout_spi0", group_sclk_p, SRC_PERIL1, 16, 4),
+	MUX(CLK_MOUT_AUDIO, "mout_audio", group_sclk_audio_p, SRC_PERIL1, 4, 4),
+
+	/* SRC_CPU */
+	MUX(CLK_MOUT_MPLL_USER_C, "mout_mpll_user_c", mout_mpll_user_p,
+	    SRC_CPU, 24, 1),
+	MUX(CLK_MOUT_HPM, "mout_hpm", mout_hpm_p, SRC_CPU, 20, 1),
+	MUX(CLK_MOUT_CORE, "mout_core", mout_core_p, SRC_CPU, 16, 1),
+	MUX(CLK_MOUT_APLL, "mout_apll", mout_apll_p, SRC_CPU, 0, 1),
+};
+
+static struct samsung_div_clock div_clks[] __initdata = {
+	/*
+	 * NOTE: Following table is sorted by register address in ascending
+	 * order and then bitfield shift in descending order, as it is done
+	 * in the User's Manual. When adding new entries, please make sure
+	 * that the order is preserved, to avoid merge conflicts and make
+	 * further work with defined data easier.
+	 */
+
+	/* DIV_LEFTBUS */
+	DIV(CLK_DIV_GPL, "div_gpl", "div_gdl", DIV_LEFTBUS, 4, 3),
+	DIV(CLK_DIV_GDL, "div_gdl", "mout_gdl", DIV_LEFTBUS, 0, 4),
+
+	/* DIV_RIGHTBUS */
+	DIV(CLK_DIV_GPR, "div_gpr", "div_gdr", DIV_RIGHTBUS, 4, 3),
+	DIV(CLK_DIV_GDR, "div_gdr", "mout_gdr", DIV_RIGHTBUS, 0, 4),
+
+	/* DIV_TOP */
+	DIV(CLK_DIV_MPLL_PRE, "div_mpll_pre", "sclk_mpll_mif", DIV_TOP, 28, 2),
+	DIV(CLK_DIV_ACLK_400_MCUISP, "div_aclk_400_mcuisp",
+	    "mout_aclk_400_mcuisp", DIV_TOP, 24, 3),
+	DIV(CLK_DIV_EBI, "div_ebi", "mout_ebi_1", DIV_TOP, 16, 3),
+	DIV(CLK_DIV_ACLK_200, "div_aclk_200", "mout_aclk_200", DIV_TOP, 12, 3),
+	DIV(CLK_DIV_ACLK_160, "div_aclk_160", "mout_aclk_160", DIV_TOP, 8, 3),
+	DIV(CLK_DIV_ACLK_100, "div_aclk_100", "mout_aclk_100", DIV_TOP, 4, 4),
+	DIV(CLK_DIV_ACLK_266, "div_aclk_266", "mout_aclk_266", DIV_TOP, 0, 3),
+
+	/* DIV_CAM */
+	DIV(CLK_DIV_CAM1, "div_cam1", "mout_cam1", DIV_CAM, 20, 4),
+	DIV(CLK_DIV_CAM_BLK, "div_cam_blk", "mout_cam_blk", DIV_CAM, 0, 4),
+
+	/* DIV_MFC */
+	DIV(CLK_DIV_MFC, "div_mfc", "mout_mfc", DIV_MFC, 0, 4),
+
+	/* DIV_G3D */
+	DIV(CLK_DIV_G3D, "div_g3d", "mout_g3d", DIV_G3D, 0, 4),
+
+	/* DIV_LCD */
+	DIV_F(CLK_DIV_MIPI0_PRE, "div_mipi0_pre", "div_mipi0", DIV_LCD, 20, 4,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_MIPI0, "div_mipi0", "mout_mipi0", DIV_LCD, 16, 4),
+	DIV(CLK_DIV_FIMD0, "div_fimd0", "mout_fimd0", DIV_LCD, 0, 4),
+
+	/* DIV_ISP */
+	DIV(CLK_DIV_UART_ISP, "div_uart_isp", "mout_uart_isp", DIV_ISP, 28, 4),
+	DIV_F(CLK_DIV_SPI1_ISP_PRE, "div_spi1_isp_pre", "div_spi1_isp",
+		DIV_ISP, 20, 8, CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_SPI1_ISP, "div_spi1_isp", "mout_spi1_isp", DIV_ISP, 16, 4),
+	DIV_F(CLK_DIV_SPI0_ISP_PRE, "div_spi0_isp_pre", "div_spi0_isp",
+		DIV_ISP, 8, 8, CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_SPI0_ISP, "div_spi0_isp", "mout_spi0_isp", DIV_ISP, 0, 4),
+
+	/* DIV_FSYS0 */
+	DIV_F(CLK_DIV_TSADC_PRE, "div_tsadc_pre", "div_tsadc", DIV_FSYS0, 8, 8,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_TSADC, "div_tsadc", "mout_tsadc", DIV_FSYS0, 0, 4),
+
+	/* DIV_FSYS1 */
+	DIV_F(CLK_DIV_MMC1_PRE, "div_mmc1_pre", "div_mmc1", DIV_FSYS1, 24, 8,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_MMC1, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
+	DIV_F(CLK_DIV_MMC0_PRE, "div_mmc0_pre", "div_mmc0", DIV_FSYS1, 8, 8,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
+
+	/* DIV_PERIL0 */
+	DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
+	DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
+
+	/* DIV_PERIL1 */
+	DIV_F(CLK_DIV_SPI1_PRE, "div_spi1_pre", "div_spi1", DIV_PERIL1, 24, 8,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_SPI1, "div_spi1", "mout_spi1", DIV_PERIL1, 16, 4),
+	DIV_F(CLK_DIV_SPI0_PRE, "div_spi0_pre", "div_spi0", DIV_PERIL1, 8, 8,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_SPI0, "div_spi0", "mout_spi0", DIV_PERIL1, 0, 4),
+
+	/* DIV_PERIL4 */
+	DIV(CLK_DIV_PCM, "div_pcm", "div_audio", DIV_PERIL4, 20, 8),
+	DIV(CLK_DIV_AUDIO, "div_audio", "mout_audio", DIV_PERIL4, 16, 4),
+
+	/* DIV_PERIL5 */
+	DIV(CLK_DIV_I2S, "div_i2s", "div_audio", DIV_PERIL5, 8, 6),
+
+	/* DIV_CPU0 */
+	DIV(CLK_DIV_CORE2, "div_core2", "div_core", DIV_CPU0, 28, 3),
+	DIV(CLK_DIV_APLL, "div_apll", "mout_apll", DIV_CPU0, 24, 3),
+	DIV(CLK_DIV_PCLK_DBG, "div_pclk_dbg", "div_core2", DIV_CPU0, 20, 3),
+	DIV(CLK_DIV_ATB, "div_atb", "div_core2", DIV_CPU0, 16, 3),
+	DIV(CLK_DIV_COREM, "div_corem", "div_core2", DIV_CPU0, 4, 3),
+	DIV(CLK_DIV_CORE, "div_core", "mout_core", DIV_CPU0, 0, 3),
+
+	/* DIV_CPU1 */
+	DIV(CLK_DIV_HPM, "div_hpm", "div_copy", DIV_CPU1, 4, 3),
+	DIV(CLK_DIV_COPY, "div_copy", "mout_hpm", DIV_CPU1, 0, 3),
+};
+
+static struct samsung_gate_clock gate_clks[] __initdata = {
+	/*
+	 * NOTE: Following table is sorted by register address in ascending
+	 * order and then bitfield shift in descending order, as it is done
+	 * in the User's Manual. When adding new entries, please make sure
+	 * that the order is preserved, to avoid merge conflicts and make
+	 * further work with defined data easier.
+	 */
+
+	/* GATE_IP_LEFTBUS */
+	GATE(CLK_ASYNC_G3D, "async_g3d", "div_aclk_100", GATE_IP_LEFTBUS, 6,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_ASYNC_MFCL, "async_mfcl", "div_aclk_100", GATE_IP_LEFTBUS, 4,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMULEFT, "ppmuleft", "div_aclk_100", GATE_IP_LEFTBUS, 1,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_GPIO_LEFT, "gpio_left", "div_aclk_100", GATE_IP_LEFTBUS, 0,
+		CLK_IGNORE_UNUSED, 0),
+
+	/* GATE_IP_RIGHTBUS */
+	GATE(CLK_ASYNC_ISPMX, "async_ispmx", "div_aclk_100",
+		GATE_IP_RIGHTBUS, 9, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_ASYNC_FSYSD, "async_fsysd", "div_aclk_100",
+		GATE_IP_RIGHTBUS, 5, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_ASYNC_LCD0X, "async_lcd0x", "div_aclk_100",
+		GATE_IP_RIGHTBUS, 3, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_ASYNC_CAMX, "async_camx", "div_aclk_100", GATE_IP_RIGHTBUS, 2,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMURIGHT, "ppmuright", "div_aclk_100", GATE_IP_RIGHTBUS, 1,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_GPIO_RIGHT, "gpio_right", "div_aclk_100", GATE_IP_RIGHTBUS, 0,
+		CLK_IGNORE_UNUSED, 0),
+
+	/* GATE_IP_PERIR */
+	GATE(CLK_MONOCNT, "monocnt", "div_aclk_100", GATE_IP_PERIR, 22,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC6, "tzpc6", "div_aclk_100", GATE_IP_PERIR, 21,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PROVISIONKEY1, "provisionkey1", "div_aclk_100",
+		GATE_IP_PERIR, 20, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PROVISIONKEY0, "provisionkey0", "div_aclk_100",
+		GATE_IP_PERIR, 19, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_CMU_ISPPART, "cmu_isppart", "div_aclk_100", GATE_IP_PERIR, 18,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TMU_APBIF, "tmu_apbif", "div_aclk_100",
+		GATE_IP_PERIR, 17, 0, 0),
+	GATE(CLK_KEYIF, "keyif", "div_aclk_100", GATE_IP_PERIR, 16, 0, 0),
+	GATE(CLK_RTC, "rtc", "div_aclk_100", GATE_IP_PERIR, 15, 0, 0),
+	GATE(CLK_WDT, "wdt", "div_aclk_100", GATE_IP_PERIR, 14, 0, 0),
+	GATE(CLK_MCT, "mct", "div_aclk_100", GATE_IP_PERIR, 13, 0, 0),
+	GATE(CLK_SECKEY, "seckey", "div_aclk_100", GATE_IP_PERIR, 12,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC5, "tzpc5", "div_aclk_100", GATE_IP_PERIR, 10,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC4, "tzpc4", "div_aclk_100", GATE_IP_PERIR, 9,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC3, "tzpc3", "div_aclk_100", GATE_IP_PERIR, 8,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC2, "tzpc2", "div_aclk_100", GATE_IP_PERIR, 7,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC1, "tzpc1", "div_aclk_100", GATE_IP_PERIR, 6,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC0, "tzpc0", "div_aclk_100", GATE_IP_PERIR, 5,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_CMU_COREPART, "cmu_corepart", "div_aclk_100", GATE_IP_PERIR, 4,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_CMU_TOPPART, "cmu_toppart", "div_aclk_100", GATE_IP_PERIR, 3,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PMU_APBIF, "pmu_apbif", "div_aclk_100", GATE_IP_PERIR, 2,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_SYSREG, "sysreg", "div_aclk_100", GATE_IP_PERIR, 1,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_CHIP_ID, "chip_id", "div_aclk_100", GATE_IP_PERIR, 0,
+		CLK_IGNORE_UNUSED, 0),
+
+	/* GATE_SCLK_CAM */
+	GATE(CLK_SCLK_JPEG, "sclk_jpeg", "div_cam_blk",
+		GATE_SCLK_CAM, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_M2MSCALER, "sclk_m2mscaler", "div_cam_blk",
+		GATE_SCLK_CAM, 2, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_GSCALER1, "sclk_gscaler1", "div_cam_blk",
+		GATE_SCLK_CAM, 1, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_GSCALER0, "sclk_gscaler0", "div_cam_blk",
+		GATE_SCLK_CAM, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_MFC */
+	GATE(CLK_SCLK_MFC, "sclk_mfc", "div_mfc",
+		GATE_SCLK_MFC, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_G3D */
+	GATE(CLK_SCLK_G3D, "sclk_g3d", "div_g3d",
+		GATE_SCLK_G3D, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_LCD */
+	GATE(CLK_SCLK_MIPIDPHY2L, "sclk_mipidphy2l", "div_mipi0",
+		GATE_SCLK_LCD, 4, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_MIPI0, "sclk_mipi0", "div_mipi0_pre",
+		GATE_SCLK_LCD, 3, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_FIMD0, "sclk_fimd0", "div_fimd0",
+		GATE_SCLK_LCD, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_ISP_TOP */
+	GATE(CLK_SCLK_CAM1, "sclk_cam1", "div_cam1",
+		GATE_SCLK_ISP_TOP, 4, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "div_uart_isp",
+		GATE_SCLK_ISP_TOP, 3, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "div_spi1_isp",
+		GATE_SCLK_ISP_TOP, 2, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "div_spi0_isp",
+		GATE_SCLK_ISP_TOP, 1, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_FSYS */
+	GATE(CLK_SCLK_UPLL, "sclk_upll", "mout_upll", GATE_SCLK_FSYS, 10, 0, 0),
+	GATE(CLK_SCLK_TSADC, "sclk_tsadc", "div_tsadc_pre",
+		GATE_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_EBI, "sclk_ebi", "div_ebi",
+		GATE_SCLK_FSYS, 6, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc1_pre",
+		GATE_SCLK_FSYS, 1, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc0_pre",
+		GATE_SCLK_FSYS, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_PERIL */
+	GATE(CLK_SCLK_I2S, "sclk_i2s", "div_i2s",
+		GATE_SCLK_PERIL, 18, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_PCM, "sclk_pcm", "div_pcm",
+		GATE_SCLK_PERIL, 16, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_SPI1, "sclk_spi1", "div_spi1_pre",
+		GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_SPI0, "sclk_spi0", "div_spi0_pre",
+		GATE_SCLK_PERIL, 6, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
+		GATE_SCLK_PERIL, 1, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
+		GATE_SCLK_PERIL, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_IP_CAM */
+	GATE(CLK_QEJPEG, "qejpeg", "div_cam_blk_320", GATE_IP_CAM, 19,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PIXELASYNCM1, "pixelasyncm1", "div_cam_blk_320",
+		GATE_IP_CAM, 18, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PIXELASYNCM0, "pixelasyncm0", "div_cam_blk_320",
+		GATE_IP_CAM, 17, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMUCAMIF, "ppmucamif", "div_cam_blk_320",
+		GATE_IP_CAM, 16, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_QEM2MSCALER, "qem2mscaler", "div_cam_blk_320",
+		GATE_IP_CAM, 14, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_QEGSCALER1, "qegscaler1", "div_cam_blk_320",
+		GATE_IP_CAM, 13, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_QEGSCALER0, "qegscaler0", "div_cam_blk_320",
+		GATE_IP_CAM, 12, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_SMMUJPEG, "smmujpeg", "div_cam_blk_320",
+		GATE_IP_CAM, 11, 0, 0),
+	GATE(CLK_SMMUM2M2SCALER, "smmum2m2scaler", "div_cam_blk_320",
+		GATE_IP_CAM, 9, 0, 0),
+	GATE(CLK_SMMUGSCALER1, "smmugscaler1", "div_cam_blk_320",
+		GATE_IP_CAM, 8, 0, 0),
+	GATE(CLK_SMMUGSCALER0, "smmugscaler0", "div_cam_blk_320",
+		GATE_IP_CAM, 7, 0, 0),
+	GATE(CLK_JPEG, "jpeg", "div_cam_blk_320", GATE_IP_CAM, 6, 0, 0),
+	GATE(CLK_M2MSCALER, "m2mscaler", "div_cam_blk_320",
+		GATE_IP_CAM, 2, 0, 0),
+	GATE(CLK_GSCALER1, "gscaler1", "div_cam_blk_320", GATE_IP_CAM, 1, 0, 0),
+	GATE(CLK_GSCALER0, "gscaler0", "div_cam_blk_320", GATE_IP_CAM, 0, 0, 0),
+
+	/* GATE_IP_MFC */
+	GATE(CLK_QEMFC, "qemfc", "div_aclk_200", GATE_IP_MFC, 5,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMUMFC_L, "ppmumfc_l", "div_aclk_200", GATE_IP_MFC, 3,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_SMMUMFC_L, "smmumfc_l", "div_aclk_200", GATE_IP_MFC, 1, 0, 0),
+	GATE(CLK_MFC, "mfc", "div_aclk_200", GATE_IP_MFC, 0, 0, 0),
+
+	/* GATE_IP_G3D */
+	GATE(CLK_SMMUG3D, "smmug3d", "div_aclk_200", GATE_IP_G3D, 3, 0, 0),
+	GATE(CLK_QEG3D, "qeg3d", "div_aclk_200", GATE_IP_G3D, 2,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMUG3D, "ppmug3d", "div_aclk_200", GATE_IP_G3D, 1,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_G3D, "g3d", "div_aclk_200", GATE_IP_G3D, 0, 0, 0),
+
+	/* GATE_IP_LCD */
+	GATE(CLK_QE_CH1_LCD, "qe_ch1_lcd", "div_aclk_160", GATE_IP_LCD, 7,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_QE_CH0_LCD, "qe_ch0_lcd", "div_aclk_160", GATE_IP_LCD, 6,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMULCD0, "ppmulcd0", "div_aclk_160", GATE_IP_LCD, 5,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_SMMUFIMD0, "smmufimd0", "div_aclk_160", GATE_IP_LCD, 4, 0, 0),
+	GATE(CLK_DSIM0, "dsim0", "div_aclk_160", GATE_IP_LCD, 3, 0, 0),
+	GATE(CLK_SMIES, "smies", "div_aclk_160", GATE_IP_LCD, 2, 0, 0),
+	GATE(CLK_FIMD0, "fimd0", "div_aclk_160", GATE_IP_LCD, 0, 0, 0),
+
+	/* GATE_IP_ISP */
+	GATE(CLK_CAM1, "cam1", "mout_aclk_266_sub", GATE_IP_ISP, 5, 0, 0),
+	GATE(CLK_UART_ISP_TOP, "uart_isp_top", "mout_aclk_266_sub",
+		GATE_IP_ISP, 3, 0, 0),
+	GATE(CLK_SPI1_ISP_TOP, "spi1_isp_top", "mout_aclk_266_sub",
+		GATE_IP_ISP, 2, 0, 0),
+	GATE(CLK_SPI0_ISP_TOP, "spi0_isp_top", "mout_aclk_266_sub",
+		GATE_IP_ISP, 1, 0, 0),
+
+	/* GATE_IP_FSYS */
+	GATE(CLK_TSADC, "tsadc", "div_aclk_200", GATE_IP_FSYS, 20, 0, 0),
+	GATE(CLK_PPMUFILE, "ppmufile", "div_aclk_200", GATE_IP_FSYS, 17,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_USBOTG, "usbotg", "div_aclk_200", GATE_IP_FSYS, 13, 0, 0),
+	GATE(CLK_USBHOST, "usbhost", "div_aclk_200", GATE_IP_FSYS, 12, 0, 0),
+	GATE(CLK_SROMC, "sromc", "div_aclk_200", GATE_IP_FSYS, 11, 0, 0),
+	GATE(CLK_SDMMC1, "sdmmc1", "div_aclk_200", GATE_IP_FSYS, 6, 0, 0),
+	GATE(CLK_SDMMC0, "sdmmc0", "div_aclk_200", GATE_IP_FSYS, 5, 0, 0),
+	GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0, 0),
+	GATE(CLK_PDMA0, "pdma0", "div_aclk_200", GATE_IP_FSYS, 0, 0, 0),
+
+	/* GATE_IP_PERIL */
+	GATE(CLK_PWM, "pwm", "div_aclk_100", GATE_IP_PERIL, 24, 0, 0),
+	GATE(CLK_PCM, "pcm", "div_aclk_100", GATE_IP_PERIL, 23, 0, 0),
+	GATE(CLK_I2S, "i2s", "div_aclk_100", GATE_IP_PERIL, 21, 0, 0),
+	GATE(CLK_SPI1, "spi1", "div_aclk_100", GATE_IP_PERIL, 17, 0, 0),
+	GATE(CLK_SPI0, "spi0", "div_aclk_100", GATE_IP_PERIL, 16, 0, 0),
+	GATE(CLK_I2C7, "i2c7", "div_aclk_100", GATE_IP_PERIL, 13, 0, 0),
+	GATE(CLK_I2C6, "i2c6", "div_aclk_100", GATE_IP_PERIL, 12, 0, 0),
+	GATE(CLK_I2C5, "i2c5", "div_aclk_100", GATE_IP_PERIL, 11, 0, 0),
+	GATE(CLK_I2C4, "i2c4", "div_aclk_100", GATE_IP_PERIL, 10, 0, 0),
+	GATE(CLK_I2C3, "i2c3", "div_aclk_100", GATE_IP_PERIL, 9, 0, 0),
+	GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0),
+	GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0),
+	GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0),
+	GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0),
+	GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0),
+};
+
+/* APLL & MPLL & BPLL & UPLL */
+static struct samsung_pll_rate_table exynos3250_pll_rates[] = {
+	PLL_35XX_RATE(1200000000, 400, 4, 1),
+	PLL_35XX_RATE(1100000000, 275, 3, 1),
+	PLL_35XX_RATE(1066000000, 533, 6, 1),
+	PLL_35XX_RATE(1000000000, 250, 3, 1),
+	PLL_35XX_RATE( 960000000, 320, 4, 1),
+	PLL_35XX_RATE( 900000000, 300, 4, 1),
+	PLL_35XX_RATE( 850000000, 425, 6, 1),
+	PLL_35XX_RATE( 800000000, 200, 3, 1),
+	PLL_35XX_RATE( 700000000, 175, 3, 1),
+	PLL_35XX_RATE( 667000000, 667, 12, 1),
+	PLL_35XX_RATE( 600000000, 400, 4, 2),
+	PLL_35XX_RATE( 533000000, 533, 6, 2),
+	PLL_35XX_RATE( 520000000, 260, 3, 2),
+	PLL_35XX_RATE( 500000000, 250, 3, 2),
+	PLL_35XX_RATE( 400000000, 200, 3, 2),
+	PLL_35XX_RATE( 200000000, 200, 3, 3),
+	PLL_35XX_RATE( 100000000, 200, 3, 4),
+	{ /* sentinel */ }
+};
+
+/* VPLL */
+static struct samsung_pll_rate_table exynos3250_vpll_rates[] = {
+	PLL_36XX_RATE(600000000, 100, 2, 1,     0),
+	PLL_36XX_RATE(533000000, 266, 3, 2, 32768),
+	PLL_36XX_RATE(519230987, 173, 2, 2,  5046),
+	PLL_36XX_RATE(500000000, 250, 3, 2,     0),
+	PLL_36XX_RATE(445500000, 148, 2, 2, 32768),
+	PLL_36XX_RATE(445055007, 148, 2, 2, 23047),
+	PLL_36XX_RATE(400000000, 200, 3, 2,     0),
+	PLL_36XX_RATE(371250000, 123, 2, 2, 49152),
+	PLL_36XX_RATE(370878997, 185, 3, 2, 28803),
+	PLL_36XX_RATE(340000000, 170, 3, 2,     0),
+	PLL_36XX_RATE(335000015, 111, 2, 2, 43691),
+	PLL_36XX_RATE(333000000, 111, 2, 2,     0),
+	PLL_36XX_RATE(330000000, 110, 2, 2,     0),
+	PLL_36XX_RATE(320000015, 106, 2, 2, 43691),
+	PLL_36XX_RATE(300000000, 100, 2, 2,     0),
+	PLL_36XX_RATE(275000000, 275, 3, 3,     0),
+	PLL_36XX_RATE(222750000, 148, 2, 3, 32768),
+	PLL_36XX_RATE(222528007, 148, 2, 3, 23069),
+	PLL_36XX_RATE(160000000, 160, 3, 3,     0),
+	PLL_36XX_RATE(148500000,  99, 2, 3,     0),
+	PLL_36XX_RATE(148352005,  98, 2, 3, 59070),
+	PLL_36XX_RATE(108000000, 144, 2, 4,     0),
+	PLL_36XX_RATE( 74250000,  99, 2, 4,     0),
+	PLL_36XX_RATE( 74176002,  98, 3, 4, 59070),
+	PLL_36XX_RATE( 54054000, 216, 3, 5, 14156),
+	PLL_36XX_RATE( 54000000, 144, 2, 5,     0),
+	{ /* sentinel */ }
+};
+
+static struct samsung_pll_clock exynos3250_plls[nr_plls] __initdata = {
+	[apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll",
+			APLL_LOCK, APLL_CON0, NULL),
+	[mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll",
+			MPLL_LOCK, MPLL_CON0, NULL),
+	[vpll] = PLL(pll_36xx, CLK_FOUT_VPLL, "fout_vpll", "fin_pll",
+			VPLL_LOCK, VPLL_CON0, NULL),
+	[upll] = PLL(pll_35xx, CLK_FOUT_UPLL, "fout_upll", "fin_pll",
+			UPLL_LOCK, UPLL_CON0, NULL),
+};
+
+static void __init exynos3250_cmu_init(struct device_node *np)
+{
+	struct samsung_clk_provider *ctx;
+
+	reg_base = of_iomap(np, 0);
+	if (!reg_base)
+		panic("%s: failed to map registers\n", __func__);
+
+	ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
+
+	samsung_clk_register_fixed_factor(ctx, fixed_factor_clks,
+					  ARRAY_SIZE(fixed_factor_clks));
+
+	exynos3250_plls[apll].rate_table = exynos3250_pll_rates;
+	exynos3250_plls[mpll].rate_table = exynos3250_pll_rates;
+	exynos3250_plls[vpll].rate_table = exynos3250_vpll_rates;
+	exynos3250_plls[upll].rate_table = exynos3250_pll_rates;
+
+	samsung_clk_register_pll(ctx, exynos3250_plls,
+					ARRAY_SIZE(exynos3250_plls), reg_base);
+
+	samsung_clk_register_mux(ctx, mux_clks, ARRAY_SIZE(mux_clks));
+	samsung_clk_register_div(ctx, div_clks, ARRAY_SIZE(div_clks));
+	samsung_clk_register_gate(ctx, gate_clks, ARRAY_SIZE(gate_clks));
+
+	exynos3250_clk_sleep_init();
+}
+CLK_OF_DECLARE(exynos3250_cmu, "samsung,exynos3250-cmu", exynos3250_cmu_init);

drivers/clk/samsung/clk-exynos4.c

@@ -428,7 +428,7 @@ static struct samsung_fixed_rate_clock exynos4_fixed_rate_ext_clks[] __initdata
 /* fixed rate clocks generated inside the soc */
 static struct samsung_fixed_rate_clock exynos4_fixed_rate_clks[] __initdata = {
 	FRATE(0, "sclk_hdmi24m", NULL, CLK_IS_ROOT, 24000000),
-	FRATE(0, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 27000000),
+	FRATE(CLK_SCLK_HDMIPHY, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 27000000),
 	FRATE(0, "sclk_usbphy0", NULL, CLK_IS_ROOT, 48000000),
 };
 
@@ -903,7 +903,7 @@ static struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = {
 	GATE(CLK_AUDSS, "audss", "sclk_epll", E4X12_GATE_IP_MAUDIO, 0, 0, 0),
 	GATE(CLK_MDNIE0, "mdnie0", "aclk160", GATE_IP_LCD0, 2, 0, 0),
 	GATE(CLK_ROTATOR, "rotator", "aclk200", E4X12_GATE_IP_IMAGE, 1, 0, 0),
-	GATE(CLK_MDMA2, "mdma2", "aclk200", E4X12_GATE_IP_IMAGE, 2, 0, 0),
+	GATE(CLK_MDMA, "mdma", "aclk200", E4X12_GATE_IP_IMAGE, 2, 0, 0),
 	GATE(CLK_SMMU_MDMA, "smmu_mdma", "aclk200", E4X12_GATE_IP_IMAGE, 5, 0,
 		0),
 	GATE(CLK_MIPI_HSI, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0),
@@ -1043,7 +1043,7 @@ static unsigned long exynos4_get_xom(void)
 	return xom;
 }
 
-static void __init exynos4_clk_register_finpll(void)
+static void __init exynos4_clk_register_finpll(struct samsung_clk_provider *ctx)
 {
 	struct samsung_fixed_rate_clock fclk;
 	struct clk *clk;
@@ -1066,7 +1066,7 @@ static void __init exynos4_clk_register_finpll(void)
 	fclk.parent_name = NULL;
 	fclk.flags = CLK_IS_ROOT;
 	fclk.fixed_rate = finpll_f;
-	samsung_clk_register_fixed_rate(&fclk, 1);
+	samsung_clk_register_fixed_rate(ctx, &fclk, 1);
 
 }
 
@@ -1176,22 +1176,25 @@ static struct samsung_pll_clock exynos4x12_plls[nr_plls] __initdata = {
 static void __init exynos4_clk_init(struct device_node *np,
 				    enum exynos4_soc soc)
 {
+	struct samsung_clk_provider *ctx;
 	exynos4_soc = soc;
 
 	reg_base = of_iomap(np, 0);
 	if (!reg_base)
 		panic("%s: failed to map registers\n", __func__);
 
-	samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+	ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
 
-	samsung_clk_of_register_fixed_ext(exynos4_fixed_rate_ext_clks,
+	samsung_clk_of_register_fixed_ext(ctx, exynos4_fixed_rate_ext_clks,
 			ARRAY_SIZE(exynos4_fixed_rate_ext_clks),
 			ext_clk_match);
 
-	exynos4_clk_register_finpll();
+	exynos4_clk_register_finpll(ctx);
 
 	if (exynos4_soc == EXYNOS4210) {
-		samsung_clk_register_mux(exynos4210_mux_early,
+		samsung_clk_register_mux(ctx, exynos4210_mux_early,
 					ARRAY_SIZE(exynos4210_mux_early));
 
 		if (_get_rate("fin_pll") == 24000000) {
@@ -1205,7 +1208,7 @@ static void __init exynos4_clk_init(struct device_node *np,
 			exynos4210_plls[vpll].rate_table =
 							exynos4210_vpll_rates;
 
-		samsung_clk_register_pll(exynos4210_plls,
+		samsung_clk_register_pll(ctx, exynos4210_plls,
 					ARRAY_SIZE(exynos4210_plls), reg_base);
 	} else {
 		if (_get_rate("fin_pll") == 24000000) {
@@ -1217,42 +1220,42 @@ static void __init exynos4_clk_init(struct device_node *np,
 							exynos4x12_vpll_rates;
 		}
 
-		samsung_clk_register_pll(exynos4x12_plls,
+		samsung_clk_register_pll(ctx, exynos4x12_plls,
 					ARRAY_SIZE(exynos4x12_plls), reg_base);
 	}
 
-	samsung_clk_register_fixed_rate(exynos4_fixed_rate_clks,
+	samsung_clk_register_fixed_rate(ctx, exynos4_fixed_rate_clks,
 			ARRAY_SIZE(exynos4_fixed_rate_clks));
-	samsung_clk_register_mux(exynos4_mux_clks,
+	samsung_clk_register_mux(ctx, exynos4_mux_clks,
 			ARRAY_SIZE(exynos4_mux_clks));
-	samsung_clk_register_div(exynos4_div_clks,
+	samsung_clk_register_div(ctx, exynos4_div_clks,
 			ARRAY_SIZE(exynos4_div_clks));
-	samsung_clk_register_gate(exynos4_gate_clks,
+	samsung_clk_register_gate(ctx, exynos4_gate_clks,
 			ARRAY_SIZE(exynos4_gate_clks));
 
 	if (exynos4_soc == EXYNOS4210) {
-		samsung_clk_register_fixed_rate(exynos4210_fixed_rate_clks,
+		samsung_clk_register_fixed_rate(ctx, exynos4210_fixed_rate_clks,
 			ARRAY_SIZE(exynos4210_fixed_rate_clks));
-		samsung_clk_register_mux(exynos4210_mux_clks,
+		samsung_clk_register_mux(ctx, exynos4210_mux_clks,
 			ARRAY_SIZE(exynos4210_mux_clks));
-		samsung_clk_register_div(exynos4210_div_clks,
+		samsung_clk_register_div(ctx, exynos4210_div_clks,
 			ARRAY_SIZE(exynos4210_div_clks));
-		samsung_clk_register_gate(exynos4210_gate_clks,
+		samsung_clk_register_gate(ctx, exynos4210_gate_clks,
 			ARRAY_SIZE(exynos4210_gate_clks));
-		samsung_clk_register_alias(exynos4210_aliases,
+		samsung_clk_register_alias(ctx, exynos4210_aliases,
 			ARRAY_SIZE(exynos4210_aliases));
 	} else {
-		samsung_clk_register_mux(exynos4x12_mux_clks,
+		samsung_clk_register_mux(ctx, exynos4x12_mux_clks,
 			ARRAY_SIZE(exynos4x12_mux_clks));
-		samsung_clk_register_div(exynos4x12_div_clks,
+		samsung_clk_register_div(ctx, exynos4x12_div_clks,
 			ARRAY_SIZE(exynos4x12_div_clks));
-		samsung_clk_register_gate(exynos4x12_gate_clks,
+		samsung_clk_register_gate(ctx, exynos4x12_gate_clks,
 			ARRAY_SIZE(exynos4x12_gate_clks));
-		samsung_clk_register_alias(exynos4x12_aliases,
+		samsung_clk_register_alias(ctx, exynos4x12_aliases,
 			ARRAY_SIZE(exynos4x12_aliases));
 	}
 
-	samsung_clk_register_alias(exynos4_aliases,
+	samsung_clk_register_alias(ctx, exynos4_aliases,
 			ARRAY_SIZE(exynos4_aliases));
 
 	exynos4_clk_sleep_init();

drivers/clk/samsung/clk-exynos5250.c

@@ -24,6 +24,8 @@
 #define APLL_CON0		0x100
 #define SRC_CPU			0x200
 #define DIV_CPU0		0x500
+#define PWR_CTRL1		0x1020
+#define PWR_CTRL2		0x1024
 #define MPLL_LOCK		0x4000
 #define MPLL_CON0		0x4100
 #define SRC_CORE1		0x4204
@@ -37,6 +39,7 @@
 #define VPLL_CON0		0x10140
 #define GPLL_CON0		0x10150
 #define SRC_TOP0		0x10210
+#define SRC_TOP1		0x10214
 #define SRC_TOP2		0x10218
 #define SRC_TOP3		0x1021c
 #define SRC_GSCL		0x10220
@@ -71,6 +74,7 @@
 #define GATE_IP_GSCL		0x10920
 #define GATE_IP_DISP1		0x10928
 #define GATE_IP_MFC		0x1092c
+#define GATE_IP_G3D		0x10930
 #define GATE_IP_GEN		0x10934
 #define GATE_IP_FSYS		0x10944
 #define GATE_IP_PERIC		0x10950
@@ -80,6 +84,23 @@
 #define SRC_CDREX		0x20200
 #define PLL_DIV2_SEL		0x20a24
 
+/*Below definitions are used for PWR_CTRL settings*/
+#define PWR_CTRL1_CORE2_DOWN_RATIO		(7 << 28)
+#define PWR_CTRL1_CORE1_DOWN_RATIO		(7 << 16)
+#define PWR_CTRL1_DIV2_DOWN_EN			(1 << 9)
+#define PWR_CTRL1_DIV1_DOWN_EN			(1 << 8)
+#define PWR_CTRL1_USE_CORE1_WFE			(1 << 5)
+#define PWR_CTRL1_USE_CORE0_WFE			(1 << 4)
+#define PWR_CTRL1_USE_CORE1_WFI			(1 << 1)
+#define PWR_CTRL1_USE_CORE0_WFI			(1 << 0)
+
+#define PWR_CTRL2_DIV2_UP_EN			(1 << 25)
+#define PWR_CTRL2_DIV1_UP_EN			(1 << 24)
+#define PWR_CTRL2_DUR_STANDBY2_VAL		(1 << 16)
+#define PWR_CTRL2_DUR_STANDBY1_VAL		(1 << 8)
+#define PWR_CTRL2_CORE2_UP_RATIO		(1 << 4)
+#define PWR_CTRL2_CORE1_UP_RATIO		(1 << 0)
+
 /* list of PLLs to be registered */
 enum exynos5250_plls {
 	apll, mpll, cpll, epll, vpll, gpll, bpll,
@@ -98,8 +119,11 @@ static struct samsung_clk_reg_dump *exynos5250_save;
 static unsigned long exynos5250_clk_regs[] __initdata = {
 	SRC_CPU,
 	DIV_CPU0,
+	PWR_CTRL1,
+	PWR_CTRL2,
 	SRC_CORE1,
 	SRC_TOP0,
+	SRC_TOP1,
 	SRC_TOP2,
 	SRC_TOP3,
 	SRC_GSCL,
@@ -133,6 +157,7 @@ static unsigned long exynos5250_clk_regs[] __initdata = {
 	DIV_PERIC5,
 	GATE_IP_GSCL,
 	GATE_IP_MFC,
+	GATE_IP_G3D,
 	GATE_IP_GEN,
 	GATE_IP_FSYS,
 	GATE_IP_PERIC,
@@ -189,10 +214,12 @@ PNAME(mout_vpllsrc_p)	= { "fin_pll", "sclk_hdmi27m" };
 PNAME(mout_vpll_p)	= { "mout_vpllsrc", "fout_vpll" };
 PNAME(mout_cpll_p)	= { "fin_pll", "fout_cpll" };
 PNAME(mout_epll_p)	= { "fin_pll", "fout_epll" };
+PNAME(mout_gpll_p)	= { "fin_pll", "fout_gpll" };
 PNAME(mout_mpll_user_p)	= { "fin_pll", "mout_mpll" };
 PNAME(mout_bpll_user_p)	= { "fin_pll", "mout_bpll" };
 PNAME(mout_aclk166_p)	= { "mout_cpll", "mout_mpll_user" };
 PNAME(mout_aclk200_p)	= { "mout_mpll_user", "mout_bpll_user" };
+PNAME(mout_aclk400_p)	= { "mout_aclk400_g3d_mid", "mout_gpll" };
 PNAME(mout_aclk200_sub_p) = { "fin_pll", "div_aclk200" };
 PNAME(mout_aclk266_sub_p) = { "fin_pll", "div_aclk266" };
 PNAME(mout_aclk333_sub_p) = { "fin_pll", "div_aclk333" };
@@ -273,12 +300,16 @@ static struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
 	MUX(0, "mout_aclk166", mout_aclk166_p, SRC_TOP0, 8, 1),
 	MUX(0, "mout_aclk200", mout_aclk200_p, SRC_TOP0, 12, 1),
 	MUX(0, "mout_aclk333", mout_aclk166_p, SRC_TOP0, 16, 1),
+	MUX(0, "mout_aclk400_g3d_mid", mout_aclk200_p, SRC_TOP0, 20, 1),
+
+	MUX(0, "mout_aclk400_g3d", mout_aclk400_p, SRC_TOP1, 28, 1),
 
 	MUX(0, "mout_cpll", mout_cpll_p, SRC_TOP2, 8, 1),
 	MUX(0, "mout_epll", mout_epll_p, SRC_TOP2, 12, 1),
 	MUX(0, "mout_vpll", mout_vpll_p, SRC_TOP2, 16, 1),
 	MUX(0, "mout_mpll_user", mout_mpll_user_p, SRC_TOP2, 20, 1),
 	MUX(0, "mout_bpll_user", mout_bpll_user_p, SRC_TOP2, 24, 1),
+	MUX(CLK_MOUT_GPLL, "mout_gpll", mout_gpll_p, SRC_TOP2, 28, 1),
 
 	MUX(0, "mout_aclk200_disp1_sub", mout_aclk200_sub_p, SRC_TOP3, 4, 1),
 	MUX(0, "mout_aclk266_gscl_sub", mout_aclk266_sub_p, SRC_TOP3, 8, 1),
@@ -351,6 +382,8 @@ static struct samsung_div_clock exynos5250_div_clks[] __initdata = {
 	DIV(0, "div_aclk200", "mout_aclk200", DIV_TOP0, 12, 3),
 	DIV(0, "div_aclk266", "mout_mpll_user", DIV_TOP0, 16, 3),
 	DIV(0, "div_aclk333", "mout_aclk333", DIV_TOP0, 20, 3),
+	DIV(0, "div_aclk400_g3d", "mout_aclk400_g3d", DIV_TOP0,
+							24, 3),
 
 	DIV(0, "div_aclk66_pre", "mout_mpll_user", DIV_TOP1, 24, 3),
 
@@ -428,6 +461,7 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
 	 * CMU_ACP
 	 */
 	GATE(CLK_MDMA0, "mdma0", "div_aclk266", GATE_IP_ACP, 1, 0, 0),
+	GATE(CLK_SSS, "sss", "div_aclk266", GATE_IP_ACP, 2, 0, 0),
 	GATE(CLK_G2D, "g2d", "div_aclk200", GATE_IP_ACP, 3, 0, 0),
 	GATE(CLK_SMMU_MDMA0, "smmu_mdma0", "div_aclk266", GATE_IP_ACP, 5, 0, 0),
 
@@ -533,7 +567,8 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
 		0),
 	GATE(CLK_SMMU_MFCL, "smmu_mfcl", "mout_aclk333_sub", GATE_IP_MFC, 2, 0,
 		0),
-
+	GATE(CLK_G3D, "g3d", "div_aclk400_g3d", GATE_IP_G3D, 0,
+					CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_ROTATOR, "rotator", "div_aclk266", GATE_IP_GEN, 1, 0, 0),
 	GATE(CLK_JPEG, "jpeg", "div_aclk166", GATE_IP_GEN, 2, 0, 0),
 	GATE(CLK_MDMA1, "mdma1", "div_aclk266", GATE_IP_GEN, 4, 0, 0),
@@ -686,6 +721,9 @@ static struct of_device_id ext_clk_match[] __initdata = {
 /* register exynox5250 clocks */
 static void __init exynos5250_clk_init(struct device_node *np)
 {
+	struct samsung_clk_provider *ctx;
+	unsigned int tmp;
+
 	if (np) {
 		reg_base = of_iomap(np, 0);
 		if (!reg_base)
@@ -694,11 +732,13 @@ static void __init exynos5250_clk_init(struct device_node *np)
 		panic("%s: unable to determine soc\n", __func__);
 	}
 
-	samsung_clk_init(np, reg_base, CLK_NR_CLKS);
-	samsung_clk_of_register_fixed_ext(exynos5250_fixed_rate_ext_clks,
+	ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
+	samsung_clk_of_register_fixed_ext(ctx, exynos5250_fixed_rate_ext_clks,
 			ARRAY_SIZE(exynos5250_fixed_rate_ext_clks),
 			ext_clk_match);
-	samsung_clk_register_mux(exynos5250_pll_pmux_clks,
+	samsung_clk_register_mux(ctx, exynos5250_pll_pmux_clks,
 				ARRAY_SIZE(exynos5250_pll_pmux_clks));
 
 	if (_get_rate("fin_pll") == 24 * MHZ) {
@@ -709,19 +749,40 @@ static void __init exynos5250_clk_init(struct device_node *np)
 	if (_get_rate("mout_vpllsrc") == 24 * MHZ)
 		exynos5250_plls[vpll].rate_table =  vpll_24mhz_tbl;
 
-	samsung_clk_register_pll(exynos5250_plls, ARRAY_SIZE(exynos5250_plls),
-					reg_base);
-	samsung_clk_register_fixed_rate(exynos5250_fixed_rate_clks,
+	samsung_clk_register_pll(ctx, exynos5250_plls,
+			ARRAY_SIZE(exynos5250_plls),
+			reg_base);
+	samsung_clk_register_fixed_rate(ctx, exynos5250_fixed_rate_clks,
 			ARRAY_SIZE(exynos5250_fixed_rate_clks));
-	samsung_clk_register_fixed_factor(exynos5250_fixed_factor_clks,
+	samsung_clk_register_fixed_factor(ctx, exynos5250_fixed_factor_clks,
 			ARRAY_SIZE(exynos5250_fixed_factor_clks));
-	samsung_clk_register_mux(exynos5250_mux_clks,
+	samsung_clk_register_mux(ctx, exynos5250_mux_clks,
 			ARRAY_SIZE(exynos5250_mux_clks));
-	samsung_clk_register_div(exynos5250_div_clks,
+	samsung_clk_register_div(ctx, exynos5250_div_clks,
 			ARRAY_SIZE(exynos5250_div_clks));
-	samsung_clk_register_gate(exynos5250_gate_clks,
+	samsung_clk_register_gate(ctx, exynos5250_gate_clks,
 			ARRAY_SIZE(exynos5250_gate_clks));
 
+	/*
+	 * Enable arm clock down (in idle) and set arm divider
+	 * ratios in WFI/WFE state.
+	 */
+	tmp = (PWR_CTRL1_CORE2_DOWN_RATIO | PWR_CTRL1_CORE1_DOWN_RATIO |
+		PWR_CTRL1_DIV2_DOWN_EN | PWR_CTRL1_DIV1_DOWN_EN |
+		PWR_CTRL1_USE_CORE1_WFE | PWR_CTRL1_USE_CORE0_WFE |
+		PWR_CTRL1_USE_CORE1_WFI | PWR_CTRL1_USE_CORE0_WFI);
+	__raw_writel(tmp, reg_base + PWR_CTRL1);
+
+	/*
+	 * Enable arm clock up (on exiting idle). Set arm divider
+	 * ratios when not in idle along with the standby duration
+	 * ratios.
+	 */
+	tmp = (PWR_CTRL2_DIV2_UP_EN | PWR_CTRL2_DIV1_UP_EN |
+		PWR_CTRL2_DUR_STANDBY2_VAL | PWR_CTRL2_DUR_STANDBY1_VAL |
+		PWR_CTRL2_CORE2_UP_RATIO | PWR_CTRL2_CORE1_UP_RATIO);
+	__raw_writel(tmp, reg_base + PWR_CTRL2);
+
 	exynos5250_clk_sleep_init();
 
 	pr_info("Exynos5250: clock setup completed, armclk=%ld\n",

drivers/clk/samsung/clk-exynos5260.c

@@ -0,0 +1,1980 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Rahul Sharma <rahul.sharma@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5260 SoC.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include "clk-exynos5260.h"
+#include "clk.h"
+#include "clk-pll.h"
+
+#include <dt-bindings/clock/exynos5260-clk.h>
+
+static LIST_HEAD(clock_reg_cache_list);
+
+struct exynos5260_clock_reg_cache {
+	struct list_head node;
+	void __iomem *reg_base;
+	struct samsung_clk_reg_dump *rdump;
+	unsigned int rd_num;
+};
+
+struct exynos5260_cmu_info {
+	/* list of pll clocks and respective count */
+	struct samsung_pll_clock *pll_clks;
+	unsigned int nr_pll_clks;
+	/* list of mux clocks and respective count */
+	struct samsung_mux_clock *mux_clks;
+	unsigned int nr_mux_clks;
+	/* list of div clocks and respective count */
+	struct samsung_div_clock *div_clks;
+	unsigned int nr_div_clks;
+	/* list of gate clocks and respective count */
+	struct samsung_gate_clock *gate_clks;
+	unsigned int nr_gate_clks;
+	/* list of fixed clocks and respective count */
+	struct samsung_fixed_rate_clock *fixed_clks;
+	unsigned int nr_fixed_clks;
+	/* total number of clocks with IDs assigned*/
+	unsigned int nr_clk_ids;
+
+	/* list and number of clocks registers */
+	unsigned long *clk_regs;
+	unsigned int nr_clk_regs;
+};
+
+/*
+ * Applicable for all 2550 Type PLLS for Exynos5260, listed below
+ * DISP_PLL, EGL_PLL, KFC_PLL, MEM_PLL, BUS_PLL, MEDIA_PLL, G3D_PLL.
+ */
+static struct samsung_pll_rate_table pll2550_24mhz_tbl[] __initdata = {
+	PLL_35XX_RATE(1700000000, 425, 6, 0),
+	PLL_35XX_RATE(1600000000, 200, 3, 0),
+	PLL_35XX_RATE(1500000000, 250, 4, 0),
+	PLL_35XX_RATE(1400000000, 175, 3, 0),
+	PLL_35XX_RATE(1300000000, 325, 6, 0),
+	PLL_35XX_RATE(1200000000, 400, 4, 1),
+	PLL_35XX_RATE(1100000000, 275, 3, 1),
+	PLL_35XX_RATE(1000000000, 250, 3, 1),
+	PLL_35XX_RATE(933000000, 311, 4, 1),
+	PLL_35XX_RATE(900000000, 300, 4, 1),
+	PLL_35XX_RATE(800000000, 200, 3, 1),
+	PLL_35XX_RATE(733000000, 733, 12, 1),
+	PLL_35XX_RATE(700000000, 175, 3, 1),
+	PLL_35XX_RATE(667000000, 667, 12, 1),
+	PLL_35XX_RATE(633000000, 211, 4, 1),
+	PLL_35XX_RATE(620000000, 310, 3, 2),
+	PLL_35XX_RATE(600000000, 400, 4, 2),
+	PLL_35XX_RATE(543000000, 362, 4, 2),
+	PLL_35XX_RATE(533000000, 533, 6, 2),
+	PLL_35XX_RATE(500000000, 250, 3, 2),
+	PLL_35XX_RATE(450000000, 300, 4, 2),
+	PLL_35XX_RATE(400000000, 200, 3, 2),
+	PLL_35XX_RATE(350000000, 175, 3, 2),
+	PLL_35XX_RATE(300000000, 400, 4, 3),
+	PLL_35XX_RATE(266000000, 266, 3, 3),
+	PLL_35XX_RATE(200000000, 200, 3, 3),
+	PLL_35XX_RATE(160000000, 160, 3, 3),
+};
+
+/*
+ * Applicable for 2650 Type PLL for AUD_PLL.
+ */
+static struct samsung_pll_rate_table pll2650_24mhz_tbl[] __initdata = {
+	PLL_36XX_RATE(1600000000, 200, 3, 0, 0),
+	PLL_36XX_RATE(1200000000, 100, 2, 0, 0),
+	PLL_36XX_RATE(1000000000, 250, 3, 1, 0),
+	PLL_36XX_RATE(800000000, 200, 3, 1, 0),
+	PLL_36XX_RATE(600000000, 100, 2, 1, 0),
+	PLL_36XX_RATE(532000000, 266, 3, 2, 0),
+	PLL_36XX_RATE(480000000, 160, 2, 2, 0),
+	PLL_36XX_RATE(432000000, 144, 2, 2, 0),
+	PLL_36XX_RATE(400000000, 200, 3, 2, 0),
+	PLL_36XX_RATE(394073130, 459, 7, 2, 49282),
+	PLL_36XX_RATE(333000000, 111, 2, 2, 0),
+	PLL_36XX_RATE(300000000, 100, 2, 2, 0),
+	PLL_36XX_RATE(266000000, 266, 3, 3, 0),
+	PLL_36XX_RATE(200000000, 200, 3, 3, 0),
+	PLL_36XX_RATE(166000000, 166, 3, 3, 0),
+	PLL_36XX_RATE(133000000, 266, 3, 4, 0),
+	PLL_36XX_RATE(100000000, 200, 3, 4, 0),
+	PLL_36XX_RATE(66000000, 176, 2, 5, 0),
+};
+
+#ifdef CONFIG_PM_SLEEP
+
+static int exynos5260_clk_suspend(void)
+{
+	struct exynos5260_clock_reg_cache *cache;
+
+	list_for_each_entry(cache, &clock_reg_cache_list, node)
+		samsung_clk_save(cache->reg_base, cache->rdump,
+				cache->rd_num);
+
+	return 0;
+}
+
+static void exynos5260_clk_resume(void)
+{
+	struct exynos5260_clock_reg_cache *cache;
+
+	list_for_each_entry(cache, &clock_reg_cache_list, node)
+		samsung_clk_restore(cache->reg_base, cache->rdump,
+				cache->rd_num);
+}
+
+static struct syscore_ops exynos5260_clk_syscore_ops = {
+	.suspend = exynos5260_clk_suspend,
+	.resume = exynos5260_clk_resume,
+};
+
+static void exynos5260_clk_sleep_init(void __iomem *reg_base,
+			unsigned long *rdump,
+			unsigned long nr_rdump)
+{
+	struct exynos5260_clock_reg_cache *reg_cache;
+
+	reg_cache = kzalloc(sizeof(struct exynos5260_clock_reg_cache),
+			GFP_KERNEL);
+	if (!reg_cache)
+		panic("could not allocate register cache.\n");
+
+	reg_cache->rdump = samsung_clk_alloc_reg_dump(rdump, nr_rdump);
+
+	if (!reg_cache->rdump)
+		panic("could not allocate register dump storage.\n");
+
+	if (list_empty(&clock_reg_cache_list))
+		register_syscore_ops(&exynos5260_clk_syscore_ops);
+
+	reg_cache->rd_num = nr_rdump;
+	reg_cache->reg_base = reg_base;
+	list_add_tail(&reg_cache->node, &clock_reg_cache_list);
+}
+
+#else
+static void exynos5260_clk_sleep_init(void __iomem *reg_base,
+			unsigned long *rdump,
+			unsigned long nr_rdump){}
+#endif
+
+/*
+ * Common function which registers plls, muxes, dividers and gates
+ * for each CMU. It also add CMU register list to register cache.
+ */
+
+void __init exynos5260_cmu_register_one(struct device_node *np,
+			struct exynos5260_cmu_info *cmu)
+{
+	void __iomem *reg_base;
+	struct samsung_clk_provider *ctx;
+
+	reg_base = of_iomap(np, 0);
+	if (!reg_base)
+		panic("%s: failed to map registers\n", __func__);
+
+	ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids);
+	if (!ctx)
+		panic("%s: unable to alllocate ctx\n", __func__);
+
+	if (cmu->pll_clks)
+		samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks,
+			reg_base);
+	if (cmu->mux_clks)
+		samsung_clk_register_mux(ctx,  cmu->mux_clks,
+			cmu->nr_mux_clks);
+	if (cmu->div_clks)
+		samsung_clk_register_div(ctx, cmu->div_clks, cmu->nr_div_clks);
+	if (cmu->gate_clks)
+		samsung_clk_register_gate(ctx, cmu->gate_clks,
+			cmu->nr_gate_clks);
+	if (cmu->fixed_clks)
+		samsung_clk_register_fixed_rate(ctx, cmu->fixed_clks,
+			cmu->nr_fixed_clks);
+	if (cmu->clk_regs)
+		exynos5260_clk_sleep_init(reg_base, cmu->clk_regs,
+			cmu->nr_clk_regs);
+}
+
+
+/* CMU_AUD */
+
+static unsigned long aud_clk_regs[] __initdata = {
+	MUX_SEL_AUD,
+	DIV_AUD0,
+	DIV_AUD1,
+	EN_ACLK_AUD,
+	EN_PCLK_AUD,
+	EN_SCLK_AUD,
+	EN_IP_AUD,
+};
+
+PNAME(mout_aud_pll_user_p) = {"fin_pll", "fout_aud_pll"};
+PNAME(mout_sclk_aud_i2s_p) = {"mout_aud_pll_user", "ioclk_i2s_cdclk"};
+PNAME(mout_sclk_aud_pcm_p) = {"mout_aud_pll_user", "ioclk_pcm_extclk"};
+
+struct samsung_mux_clock aud_mux_clks[] __initdata = {
+	MUX(AUD_MOUT_AUD_PLL_USER, "mout_aud_pll_user", mout_aud_pll_user_p,
+			MUX_SEL_AUD, 0, 1),
+	MUX(AUD_MOUT_SCLK_AUD_I2S, "mout_sclk_aud_i2s", mout_sclk_aud_i2s_p,
+			MUX_SEL_AUD, 4, 1),
+	MUX(AUD_MOUT_SCLK_AUD_PCM, "mout_sclk_aud_pcm", mout_sclk_aud_pcm_p,
+			MUX_SEL_AUD, 8, 1),
+};
+
+struct samsung_div_clock aud_div_clks[] __initdata = {
+	DIV(AUD_DOUT_ACLK_AUD_131, "dout_aclk_aud_131", "mout_aud_pll_user",
+			DIV_AUD0, 0, 4),
+
+	DIV(AUD_DOUT_SCLK_AUD_I2S, "dout_sclk_aud_i2s", "mout_sclk_aud_i2s",
+			DIV_AUD1, 0, 4),
+	DIV(AUD_DOUT_SCLK_AUD_PCM, "dout_sclk_aud_pcm", "mout_sclk_aud_pcm",
+			DIV_AUD1, 4, 8),
+	DIV(AUD_DOUT_SCLK_AUD_UART, "dout_sclk_aud_uart", "mout_aud_pll_user",
+			DIV_AUD1, 12, 4),
+};
+
+struct samsung_gate_clock aud_gate_clks[] __initdata = {
+	GATE(AUD_SCLK_I2S, "sclk_aud_i2s", "dout_sclk_aud_i2s",
+			EN_SCLK_AUD, 0, CLK_SET_RATE_PARENT, 0),
+	GATE(AUD_SCLK_PCM, "sclk_aud_pcm", "dout_sclk_aud_pcm",
+			EN_SCLK_AUD, 1, CLK_SET_RATE_PARENT, 0),
+	GATE(AUD_SCLK_AUD_UART, "sclk_aud_uart", "dout_sclk_aud_uart",
+			EN_SCLK_AUD, 2, CLK_SET_RATE_PARENT, 0),
+
+	GATE(AUD_CLK_SRAMC, "clk_sramc", "dout_aclk_aud_131", EN_IP_AUD,
+			0, 0, 0),
+	GATE(AUD_CLK_DMAC, "clk_dmac", "dout_aclk_aud_131",
+			EN_IP_AUD, 1, 0, 0),
+	GATE(AUD_CLK_I2S, "clk_i2s", "dout_aclk_aud_131", EN_IP_AUD, 2, 0, 0),
+	GATE(AUD_CLK_PCM, "clk_pcm", "dout_aclk_aud_131", EN_IP_AUD, 3, 0, 0),
+	GATE(AUD_CLK_AUD_UART, "clk_aud_uart", "dout_aclk_aud_131",
+			EN_IP_AUD, 4, 0, 0),
+};
+
+static void __init exynos5260_clk_aud_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.mux_clks = aud_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(aud_mux_clks);
+	cmu.div_clks = aud_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(aud_div_clks);
+	cmu.gate_clks = aud_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(aud_gate_clks);
+	cmu.nr_clk_ids = AUD_NR_CLK;
+	cmu.clk_regs = aud_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(aud_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_aud, "samsung,exynos5260-clock-aud",
+		exynos5260_clk_aud_init);
+
+
+/* CMU_DISP */
+
+static unsigned long disp_clk_regs[] __initdata = {
+	MUX_SEL_DISP0,
+	MUX_SEL_DISP1,
+	MUX_SEL_DISP2,
+	MUX_SEL_DISP3,
+	MUX_SEL_DISP4,
+	DIV_DISP,
+	EN_ACLK_DISP,
+	EN_PCLK_DISP,
+	EN_SCLK_DISP0,
+	EN_SCLK_DISP1,
+	EN_IP_DISP,
+	EN_IP_DISP_BUS,
+};
+
+PNAME(mout_phyclk_dptx_phy_ch3_txd_clk_user_p) = {"fin_pll",
+			"phyclk_dptx_phy_ch3_txd_clk"};
+PNAME(mout_phyclk_dptx_phy_ch2_txd_clk_user_p) = {"fin_pll",
+			"phyclk_dptx_phy_ch2_txd_clk"};
+PNAME(mout_phyclk_dptx_phy_ch1_txd_clk_user_p) = {"fin_pll",
+			"phyclk_dptx_phy_ch1_txd_clk"};
+PNAME(mout_phyclk_dptx_phy_ch0_txd_clk_user_p) = {"fin_pll",
+			"phyclk_dptx_phy_ch0_txd_clk"};
+PNAME(mout_aclk_disp_222_user_p) = {"fin_pll", "dout_aclk_disp_222"};
+PNAME(mout_sclk_disp_pixel_user_p) = {"fin_pll", "dout_sclk_disp_pixel"};
+PNAME(mout_aclk_disp_333_user_p) = {"fin_pll", "dout_aclk_disp_333"};
+PNAME(mout_phyclk_hdmi_phy_tmds_clko_user_p) = {"fin_pll",
+			"phyclk_hdmi_phy_tmds_clko"};
+PNAME(mout_phyclk_hdmi_phy_ref_clko_user_p) = {"fin_pll",
+			"phyclk_hdmi_phy_ref_clko"};
+PNAME(mout_phyclk_hdmi_phy_pixel_clko_user_p) = {"fin_pll",
+			"phyclk_hdmi_phy_pixel_clko"};
+PNAME(mout_phyclk_hdmi_link_o_tmds_clkhi_user_p) = {"fin_pll",
+			"phyclk_hdmi_link_o_tmds_clkhi"};
+PNAME(mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs_p) = {"fin_pll",
+			"phyclk_mipi_dphy_4l_m_txbyte_clkhs"};
+PNAME(mout_phyclk_dptx_phy_o_ref_clk_24m_user_p) = {"fin_pll",
+			"phyclk_dptx_phy_o_ref_clk_24m"};
+PNAME(mout_phyclk_dptx_phy_clk_div2_user_p) = {"fin_pll",
+			"phyclk_dptx_phy_clk_div2"};
+PNAME(mout_sclk_hdmi_pixel_p) = {"mout_sclk_disp_pixel_user",
+			"mout_aclk_disp_222_user"};
+PNAME(mout_phyclk_mipi_dphy_4lmrxclk_esc0_user_p) = {"fin_pll",
+			"phyclk_mipi_dphy_4l_m_rxclkesc0"};
+PNAME(mout_sclk_hdmi_spdif_p) = {"fin_pll", "ioclk_spdif_extclk",
+			"dout_aclk_peri_aud", "phyclk_hdmi_phy_ref_cko"};
+
+struct samsung_mux_clock disp_mux_clks[] __initdata = {
+	MUX(DISP_MOUT_ACLK_DISP_333_USER, "mout_aclk_disp_333_user",
+			mout_aclk_disp_333_user_p,
+			MUX_SEL_DISP0, 0, 1),
+	MUX(DISP_MOUT_SCLK_DISP_PIXEL_USER, "mout_sclk_disp_pixel_user",
+			mout_sclk_disp_pixel_user_p,
+			MUX_SEL_DISP0, 4, 1),
+	MUX(DISP_MOUT_ACLK_DISP_222_USER, "mout_aclk_disp_222_user",
+			mout_aclk_disp_222_user_p,
+			MUX_SEL_DISP0, 8, 1),
+	MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH0_TXD_CLK_USER,
+			"mout_phyclk_dptx_phy_ch0_txd_clk_user",
+			mout_phyclk_dptx_phy_ch0_txd_clk_user_p,
+			MUX_SEL_DISP0, 16, 1),
+	MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH1_TXD_CLK_USER,
+			"mout_phyclk_dptx_phy_ch1_txd_clk_user",
+			mout_phyclk_dptx_phy_ch1_txd_clk_user_p,
+			MUX_SEL_DISP0, 20, 1),
+	MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH2_TXD_CLK_USER,
+			"mout_phyclk_dptx_phy_ch2_txd_clk_user",
+			mout_phyclk_dptx_phy_ch2_txd_clk_user_p,
+			MUX_SEL_DISP0, 24, 1),
+	MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH3_TXD_CLK_USER,
+			"mout_phyclk_dptx_phy_ch3_txd_clk_user",
+			mout_phyclk_dptx_phy_ch3_txd_clk_user_p,
+			MUX_SEL_DISP0, 28, 1),
+
+	MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CLK_DIV2_USER,
+			"mout_phyclk_dptx_phy_clk_div2_user",
+			mout_phyclk_dptx_phy_clk_div2_user_p,
+			MUX_SEL_DISP1, 0, 1),
+	MUX(DISP_MOUT_PHYCLK_DPTX_PHY_O_REF_CLK_24M_USER,
+			"mout_phyclk_dptx_phy_o_ref_clk_24m_user",
+			mout_phyclk_dptx_phy_o_ref_clk_24m_user_p,
+			MUX_SEL_DISP1, 4, 1),
+	MUX(DISP_MOUT_PHYCLK_MIPI_DPHY_4L_M_TXBYTE_CLKHS,
+			"mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs",
+			mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs_p,
+			MUX_SEL_DISP1, 8, 1),
+	MUX(DISP_MOUT_PHYCLK_HDMI_LINK_O_TMDS_CLKHI_USER,
+			"mout_phyclk_hdmi_link_o_tmds_clkhi_user",
+			mout_phyclk_hdmi_link_o_tmds_clkhi_user_p,
+			MUX_SEL_DISP1, 16, 1),
+	MUX(DISP_MOUT_HDMI_PHY_PIXEL,
+			"mout_phyclk_hdmi_phy_pixel_clko_user",
+			mout_phyclk_hdmi_phy_pixel_clko_user_p,
+			MUX_SEL_DISP1, 20, 1),
+	MUX(DISP_MOUT_PHYCLK_HDMI_PHY_REF_CLKO_USER,
+			"mout_phyclk_hdmi_phy_ref_clko_user",
+			mout_phyclk_hdmi_phy_ref_clko_user_p,
+			MUX_SEL_DISP1, 24, 1),
+	MUX(DISP_MOUT_PHYCLK_HDMI_PHY_TMDS_CLKO_USER,
+			"mout_phyclk_hdmi_phy_tmds_clko_user",
+			mout_phyclk_hdmi_phy_tmds_clko_user_p,
+			MUX_SEL_DISP1, 28, 1),
+
+	MUX(DISP_MOUT_PHYCLK_MIPI_DPHY_4LMRXCLK_ESC0_USER,
+			"mout_phyclk_mipi_dphy_4lmrxclk_esc0_user",
+			mout_phyclk_mipi_dphy_4lmrxclk_esc0_user_p,
+			MUX_SEL_DISP2, 0, 1),
+	MUX(DISP_MOUT_SCLK_HDMI_PIXEL, "mout_sclk_hdmi_pixel",
+			mout_sclk_hdmi_pixel_p,
+			MUX_SEL_DISP2, 4, 1),
+
+	MUX(DISP_MOUT_SCLK_HDMI_SPDIF, "mout_sclk_hdmi_spdif",
+			mout_sclk_hdmi_spdif_p,
+			MUX_SEL_DISP4, 4, 2),
+};
+
+struct samsung_div_clock disp_div_clks[] __initdata = {
+	DIV(DISP_DOUT_PCLK_DISP_111, "dout_pclk_disp_111",
+			"mout_aclk_disp_222_user",
+			DIV_DISP, 8, 4),
+	DIV(DISP_DOUT_SCLK_FIMD1_EXTCLKPLL, "dout_sclk_fimd1_extclkpll",
+			"mout_sclk_disp_pixel_user",
+			DIV_DISP, 12, 4),
+	DIV(DISP_DOUT_SCLK_HDMI_PHY_PIXEL_CLKI,
+			"dout_sclk_hdmi_phy_pixel_clki",
+			"mout_sclk_hdmi_pixel",
+			DIV_DISP, 16, 4),
+};
+
+struct samsung_gate_clock disp_gate_clks[] __initdata = {
+	GATE(DISP_MOUT_HDMI_PHY_PIXEL_USER, "sclk_hdmi_link_i_pixel",
+			"mout_phyclk_hdmi_phy_pixel_clko_user",
+			EN_SCLK_DISP0, 26, CLK_SET_RATE_PARENT, 0),
+	GATE(DISP_SCLK_PIXEL, "sclk_hdmi_phy_pixel_clki",
+			"dout_sclk_hdmi_phy_pixel_clki",
+			EN_SCLK_DISP0, 29, CLK_SET_RATE_PARENT, 0),
+
+	GATE(DISP_CLK_DP, "clk_dptx_link", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 4, 0, 0),
+	GATE(DISP_CLK_DPPHY, "clk_dptx_phy", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 5, 0, 0),
+	GATE(DISP_CLK_DSIM1, "clk_dsim1", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 6, 0, 0),
+	GATE(DISP_CLK_FIMD1, "clk_fimd1", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 7, 0, 0),
+	GATE(DISP_CLK_HDMI, "clk_hdmi", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 8, 0, 0),
+	GATE(DISP_CLK_HDMIPHY, "clk_hdmiphy", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 9, 0, 0),
+	GATE(DISP_CLK_MIPIPHY, "clk_mipi_dphy", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 10, 0, 0),
+	GATE(DISP_CLK_MIXER, "clk_mixer", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 11, 0, 0),
+	GATE(DISP_CLK_PIXEL_DISP, "clk_pixel_disp", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 12, CLK_IGNORE_UNUSED, 0),
+	GATE(DISP_CLK_PIXEL_MIXER, "clk_pixel_mixer", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 13, CLK_IGNORE_UNUSED, 0),
+	GATE(DISP_CLK_SMMU_FIMD1M0, "clk_smmu3_fimd1m0",
+			"mout_aclk_disp_222_user",
+			EN_IP_DISP, 22, 0, 0),
+	GATE(DISP_CLK_SMMU_FIMD1M1, "clk_smmu3_fimd1m1",
+			"mout_aclk_disp_222_user",
+			EN_IP_DISP, 23, 0, 0),
+	GATE(DISP_CLK_SMMU_TV, "clk_smmu3_tv", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 25, 0, 0),
+};
+
+static void __init exynos5260_clk_disp_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.mux_clks = disp_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(disp_mux_clks);
+	cmu.div_clks = disp_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(disp_div_clks);
+	cmu.gate_clks = disp_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(disp_gate_clks);
+	cmu.nr_clk_ids = DISP_NR_CLK;
+	cmu.clk_regs = disp_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(disp_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_disp, "samsung,exynos5260-clock-disp",
+		exynos5260_clk_disp_init);
+
+
+/* CMU_EGL */
+
+static unsigned long egl_clk_regs[] __initdata = {
+	EGL_PLL_LOCK,
+	EGL_PLL_CON0,
+	EGL_PLL_CON1,
+	EGL_PLL_FREQ_DET,
+	MUX_SEL_EGL,
+	MUX_ENABLE_EGL,
+	DIV_EGL,
+	DIV_EGL_PLL_FDET,
+	EN_ACLK_EGL,
+	EN_PCLK_EGL,
+	EN_SCLK_EGL,
+};
+
+PNAME(mout_egl_b_p) = {"mout_egl_pll", "dout_bus_pll"};
+PNAME(mout_egl_pll_p) = {"fin_pll", "fout_egl_pll"};
+
+struct samsung_mux_clock egl_mux_clks[] __initdata = {
+	MUX(EGL_MOUT_EGL_PLL, "mout_egl_pll", mout_egl_pll_p,
+			MUX_SEL_EGL, 4, 1),
+	MUX(EGL_MOUT_EGL_B, "mout_egl_b", mout_egl_b_p, MUX_SEL_EGL, 16, 1),
+};
+
+struct samsung_div_clock egl_div_clks[] __initdata = {
+	DIV(EGL_DOUT_EGL1, "dout_egl1", "mout_egl_b", DIV_EGL, 0, 3),
+	DIV(EGL_DOUT_EGL2, "dout_egl2", "dout_egl1", DIV_EGL, 4, 3),
+	DIV(EGL_DOUT_ACLK_EGL, "dout_aclk_egl", "dout_egl2", DIV_EGL, 8, 3),
+	DIV(EGL_DOUT_PCLK_EGL, "dout_pclk_egl", "dout_egl_atclk",
+			DIV_EGL, 12, 3),
+	DIV(EGL_DOUT_EGL_ATCLK, "dout_egl_atclk", "dout_egl2", DIV_EGL, 16, 3),
+	DIV(EGL_DOUT_EGL_PCLK_DBG, "dout_egl_pclk_dbg", "dout_egl_atclk",
+			DIV_EGL, 20, 3),
+	DIV(EGL_DOUT_EGL_PLL, "dout_egl_pll", "mout_egl_b", DIV_EGL, 24, 3),
+};
+
+static struct samsung_pll_clock egl_pll_clks[] __initdata = {
+	PLL(pll_2550xx, EGL_FOUT_EGL_PLL, "fout_egl_pll", "fin_pll",
+		EGL_PLL_LOCK, EGL_PLL_CON0,
+		pll2550_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_egl_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.pll_clks = egl_pll_clks;
+	cmu.nr_pll_clks =  ARRAY_SIZE(egl_pll_clks);
+	cmu.mux_clks = egl_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(egl_mux_clks);
+	cmu.div_clks = egl_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(egl_div_clks);
+	cmu.nr_clk_ids = EGL_NR_CLK;
+	cmu.clk_regs = egl_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(egl_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_egl, "samsung,exynos5260-clock-egl",
+		exynos5260_clk_egl_init);
+
+
+/* CMU_FSYS */
+
+static unsigned long fsys_clk_regs[] __initdata = {
+	MUX_SEL_FSYS0,
+	MUX_SEL_FSYS1,
+	EN_ACLK_FSYS,
+	EN_ACLK_FSYS_SECURE_RTIC,
+	EN_ACLK_FSYS_SECURE_SMMU_RTIC,
+	EN_SCLK_FSYS,
+	EN_IP_FSYS,
+	EN_IP_FSYS_SECURE_RTIC,
+	EN_IP_FSYS_SECURE_SMMU_RTIC,
+};
+
+PNAME(mout_phyclk_usbhost20_phyclk_user_p) = {"fin_pll",
+			"phyclk_usbhost20_phy_phyclock"};
+PNAME(mout_phyclk_usbhost20_freeclk_user_p) = {"fin_pll",
+			"phyclk_usbhost20_phy_freeclk"};
+PNAME(mout_phyclk_usbhost20_clk48mohci_user_p) = {"fin_pll",
+			"phyclk_usbhost20_phy_clk48mohci"};
+PNAME(mout_phyclk_usbdrd30_pipe_pclk_user_p) = {"fin_pll",
+			"phyclk_usbdrd30_udrd30_pipe_pclk"};
+PNAME(mout_phyclk_usbdrd30_phyclock_user_p) = {"fin_pll",
+			"phyclk_usbdrd30_udrd30_phyclock"};
+
+struct samsung_mux_clock fsys_mux_clks[] __initdata = {
+	MUX(FSYS_MOUT_PHYCLK_USBDRD30_PHYCLOCK_USER,
+			"mout_phyclk_usbdrd30_phyclock_user",
+			mout_phyclk_usbdrd30_phyclock_user_p,
+			MUX_SEL_FSYS1, 0, 1),
+	MUX(FSYS_MOUT_PHYCLK_USBDRD30_PIPE_PCLK_USER,
+			"mout_phyclk_usbdrd30_pipe_pclk_user",
+			mout_phyclk_usbdrd30_pipe_pclk_user_p,
+			MUX_SEL_FSYS1, 4, 1),
+	MUX(FSYS_MOUT_PHYCLK_USBHOST20_CLK48MOHCI_USER,
+			"mout_phyclk_usbhost20_clk48mohci_user",
+			mout_phyclk_usbhost20_clk48mohci_user_p,
+			MUX_SEL_FSYS1, 8, 1),
+	MUX(FSYS_MOUT_PHYCLK_USBHOST20_FREECLK_USER,
+			"mout_phyclk_usbhost20_freeclk_user",
+			mout_phyclk_usbhost20_freeclk_user_p,
+			MUX_SEL_FSYS1, 12, 1),
+	MUX(FSYS_MOUT_PHYCLK_USBHOST20_PHYCLK_USER,
+			"mout_phyclk_usbhost20_phyclk_user",
+			mout_phyclk_usbhost20_phyclk_user_p,
+			MUX_SEL_FSYS1, 16, 1),
+};
+
+struct samsung_gate_clock fsys_gate_clks[] __initdata = {
+	GATE(FSYS_PHYCLK_USBHOST20, "phyclk_usbhost20_phyclock",
+			"mout_phyclk_usbdrd30_phyclock_user",
+			EN_SCLK_FSYS, 1, 0, 0),
+	GATE(FSYS_PHYCLK_USBDRD30, "phyclk_usbdrd30_udrd30_phyclock_g",
+			"mout_phyclk_usbdrd30_phyclock_user",
+			EN_SCLK_FSYS, 7, 0, 0),
+
+	GATE(FSYS_CLK_MMC0, "clk_mmc0", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 6, 0, 0),
+	GATE(FSYS_CLK_MMC1, "clk_mmc1", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 7, 0, 0),
+	GATE(FSYS_CLK_MMC2, "clk_mmc2", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 8, 0, 0),
+	GATE(FSYS_CLK_PDMA, "clk_pdma", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 9, 0, 0),
+	GATE(FSYS_CLK_SROMC, "clk_sromc", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 13, 0, 0),
+	GATE(FSYS_CLK_USBDRD30, "clk_usbdrd30", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 14, 0, 0),
+	GATE(FSYS_CLK_USBHOST20, "clk_usbhost20", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 15, 0, 0),
+	GATE(FSYS_CLK_USBLINK, "clk_usblink", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 18, 0, 0),
+	GATE(FSYS_CLK_TSI, "clk_tsi", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 20, 0, 0),
+
+	GATE(FSYS_CLK_RTIC, "clk_rtic", "dout_aclk_fsys_200",
+			EN_IP_FSYS_SECURE_RTIC, 11, 0, 0),
+	GATE(FSYS_CLK_SMMU_RTIC, "clk_smmu_rtic", "dout_aclk_fsys_200",
+			EN_IP_FSYS_SECURE_SMMU_RTIC, 12, 0, 0),
+};
+
+static void __init exynos5260_clk_fsys_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.mux_clks = fsys_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(fsys_mux_clks);
+	cmu.gate_clks = fsys_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(fsys_gate_clks);
+	cmu.nr_clk_ids = FSYS_NR_CLK;
+	cmu.clk_regs = fsys_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(fsys_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_fsys, "samsung,exynos5260-clock-fsys",
+		exynos5260_clk_fsys_init);
+
+
+/* CMU_G2D */
+
+static unsigned long g2d_clk_regs[] __initdata = {
+	MUX_SEL_G2D,
+	MUX_STAT_G2D,
+	DIV_G2D,
+	EN_ACLK_G2D,
+	EN_ACLK_G2D_SECURE_SSS,
+	EN_ACLK_G2D_SECURE_SLIM_SSS,
+	EN_ACLK_G2D_SECURE_SMMU_SLIM_SSS,
+	EN_ACLK_G2D_SECURE_SMMU_SSS,
+	EN_ACLK_G2D_SECURE_SMMU_MDMA,
+	EN_ACLK_G2D_SECURE_SMMU_G2D,
+	EN_PCLK_G2D,
+	EN_PCLK_G2D_SECURE_SMMU_SLIM_SSS,
+	EN_PCLK_G2D_SECURE_SMMU_SSS,
+	EN_PCLK_G2D_SECURE_SMMU_MDMA,
+	EN_PCLK_G2D_SECURE_SMMU_G2D,
+	EN_IP_G2D,
+	EN_IP_G2D_SECURE_SSS,
+	EN_IP_G2D_SECURE_SLIM_SSS,
+	EN_IP_G2D_SECURE_SMMU_SLIM_SSS,
+	EN_IP_G2D_SECURE_SMMU_SSS,
+	EN_IP_G2D_SECURE_SMMU_MDMA,
+	EN_IP_G2D_SECURE_SMMU_G2D,
+};
+
+PNAME(mout_aclk_g2d_333_user_p) = {"fin_pll", "dout_aclk_g2d_333"};
+
+struct samsung_mux_clock g2d_mux_clks[] __initdata = {
+	MUX(G2D_MOUT_ACLK_G2D_333_USER, "mout_aclk_g2d_333_user",
+			mout_aclk_g2d_333_user_p,
+			MUX_SEL_G2D, 0, 1),
+};
+
+struct samsung_div_clock g2d_div_clks[] __initdata = {
+	DIV(G2D_DOUT_PCLK_G2D_83, "dout_pclk_g2d_83", "mout_aclk_g2d_333_user",
+			DIV_G2D, 0, 3),
+};
+
+struct samsung_gate_clock g2d_gate_clks[] __initdata = {
+	GATE(G2D_CLK_G2D, "clk_g2d", "mout_aclk_g2d_333_user",
+			EN_IP_G2D, 4, 0, 0),
+	GATE(G2D_CLK_JPEG, "clk_jpeg", "mout_aclk_g2d_333_user",
+			EN_IP_G2D, 5, 0, 0),
+	GATE(G2D_CLK_MDMA, "clk_mdma", "mout_aclk_g2d_333_user",
+			EN_IP_G2D, 6, 0, 0),
+	GATE(G2D_CLK_SMMU3_JPEG, "clk_smmu3_jpeg", "mout_aclk_g2d_333_user",
+			EN_IP_G2D, 16, 0, 0),
+
+	GATE(G2D_CLK_SSS, "clk_sss", "mout_aclk_g2d_333_user",
+			EN_IP_G2D_SECURE_SSS, 17, 0, 0),
+
+	GATE(G2D_CLK_SLIM_SSS, "clk_slim_sss", "mout_aclk_g2d_333_user",
+			EN_IP_G2D_SECURE_SLIM_SSS, 11, 0, 0),
+
+	GATE(G2D_CLK_SMMU_SLIM_SSS, "clk_smmu_slim_sss",
+			"mout_aclk_g2d_333_user",
+			EN_IP_G2D_SECURE_SMMU_SLIM_SSS, 13, 0, 0),
+
+	GATE(G2D_CLK_SMMU_SSS, "clk_smmu_sss", "mout_aclk_g2d_333_user",
+			EN_IP_G2D_SECURE_SMMU_SSS, 14, 0, 0),
+
+	GATE(G2D_CLK_SMMU_MDMA, "clk_smmu_mdma", "mout_aclk_g2d_333_user",
+			EN_IP_G2D_SECURE_SMMU_MDMA, 12, 0, 0),
+
+	GATE(G2D_CLK_SMMU3_G2D, "clk_smmu3_g2d", "mout_aclk_g2d_333_user",
+			EN_IP_G2D_SECURE_SMMU_G2D, 15, 0, 0),
+};
+
+static void __init exynos5260_clk_g2d_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.mux_clks = g2d_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(g2d_mux_clks);
+	cmu.div_clks = g2d_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(g2d_div_clks);
+	cmu.gate_clks = g2d_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(g2d_gate_clks);
+	cmu.nr_clk_ids = G2D_NR_CLK;
+	cmu.clk_regs = g2d_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(g2d_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_g2d, "samsung,exynos5260-clock-g2d",
+		exynos5260_clk_g2d_init);
+
+
+/* CMU_G3D */
+
+static unsigned long g3d_clk_regs[] __initdata = {
+	G3D_PLL_LOCK,
+	G3D_PLL_CON0,
+	G3D_PLL_CON1,
+	G3D_PLL_FDET,
+	MUX_SEL_G3D,
+	DIV_G3D,
+	DIV_G3D_PLL_FDET,
+	EN_ACLK_G3D,
+	EN_PCLK_G3D,
+	EN_SCLK_G3D,
+	EN_IP_G3D,
+};
+
+PNAME(mout_g3d_pll_p) = {"fin_pll", "fout_g3d_pll"};
+
+struct samsung_mux_clock g3d_mux_clks[] __initdata = {
+	MUX(G3D_MOUT_G3D_PLL, "mout_g3d_pll", mout_g3d_pll_p,
+			MUX_SEL_G3D, 0, 1),
+};
+
+struct samsung_div_clock g3d_div_clks[] __initdata = {
+	DIV(G3D_DOUT_PCLK_G3D, "dout_pclk_g3d", "dout_aclk_g3d", DIV_G3D, 0, 3),
+	DIV(G3D_DOUT_ACLK_G3D, "dout_aclk_g3d", "mout_g3d_pll", DIV_G3D, 4, 3),
+};
+
+struct samsung_gate_clock g3d_gate_clks[] __initdata = {
+	GATE(G3D_CLK_G3D, "clk_g3d", "dout_aclk_g3d", EN_IP_G3D, 2, 0, 0),
+	GATE(G3D_CLK_G3D_HPM, "clk_g3d_hpm", "dout_aclk_g3d",
+			EN_IP_G3D, 3, 0, 0),
+};
+
+static struct samsung_pll_clock g3d_pll_clks[] __initdata = {
+	PLL(pll_2550, G3D_FOUT_G3D_PLL, "fout_g3d_pll", "fin_pll",
+		G3D_PLL_LOCK, G3D_PLL_CON0,
+		pll2550_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_g3d_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.pll_clks = g3d_pll_clks;
+	cmu.nr_pll_clks =  ARRAY_SIZE(g3d_pll_clks);
+	cmu.mux_clks = g3d_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(g3d_mux_clks);
+	cmu.div_clks = g3d_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(g3d_div_clks);
+	cmu.gate_clks = g3d_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(g3d_gate_clks);
+	cmu.nr_clk_ids = G3D_NR_CLK;
+	cmu.clk_regs = g3d_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(g3d_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_g3d, "samsung,exynos5260-clock-g3d",
+		exynos5260_clk_g3d_init);
+
+
+/* CMU_GSCL */
+
+static unsigned long gscl_clk_regs[] __initdata = {
+	MUX_SEL_GSCL,
+	DIV_GSCL,
+	EN_ACLK_GSCL,
+	EN_ACLK_GSCL_FIMC,
+	EN_ACLK_GSCL_SECURE_SMMU_GSCL0,
+	EN_ACLK_GSCL_SECURE_SMMU_GSCL1,
+	EN_ACLK_GSCL_SECURE_SMMU_MSCL0,
+	EN_ACLK_GSCL_SECURE_SMMU_MSCL1,
+	EN_PCLK_GSCL,
+	EN_PCLK_GSCL_FIMC,
+	EN_PCLK_GSCL_SECURE_SMMU_GSCL0,
+	EN_PCLK_GSCL_SECURE_SMMU_GSCL1,
+	EN_PCLK_GSCL_SECURE_SMMU_MSCL0,
+	EN_PCLK_GSCL_SECURE_SMMU_MSCL1,
+	EN_SCLK_GSCL,
+	EN_SCLK_GSCL_FIMC,
+	EN_IP_GSCL,
+	EN_IP_GSCL_FIMC,
+	EN_IP_GSCL_SECURE_SMMU_GSCL0,
+	EN_IP_GSCL_SECURE_SMMU_GSCL1,
+	EN_IP_GSCL_SECURE_SMMU_MSCL0,
+	EN_IP_GSCL_SECURE_SMMU_MSCL1,
+};
+
+PNAME(mout_aclk_gscl_333_user_p) = {"fin_pll", "dout_aclk_gscl_333"};
+PNAME(mout_aclk_m2m_400_user_p) = {"fin_pll", "dout_aclk_gscl_400"};
+PNAME(mout_aclk_gscl_fimc_user_p) = {"fin_pll", "dout_aclk_gscl_400"};
+PNAME(mout_aclk_csis_p) = {"dout_aclk_csis_200", "mout_aclk_gscl_fimc_user"};
+
+struct samsung_mux_clock gscl_mux_clks[] __initdata = {
+	MUX(GSCL_MOUT_ACLK_GSCL_333_USER, "mout_aclk_gscl_333_user",
+			mout_aclk_gscl_333_user_p,
+			MUX_SEL_GSCL, 0, 1),
+	MUX(GSCL_MOUT_ACLK_M2M_400_USER, "mout_aclk_m2m_400_user",
+			mout_aclk_m2m_400_user_p,
+			MUX_SEL_GSCL, 4, 1),
+	MUX(GSCL_MOUT_ACLK_GSCL_FIMC_USER, "mout_aclk_gscl_fimc_user",
+			mout_aclk_gscl_fimc_user_p,
+			MUX_SEL_GSCL, 8, 1),
+	MUX(GSCL_MOUT_ACLK_CSIS, "mout_aclk_csis", mout_aclk_csis_p,
+			MUX_SEL_GSCL, 24, 1),
+};
+
+struct samsung_div_clock gscl_div_clks[] __initdata = {
+	DIV(GSCL_DOUT_PCLK_M2M_100, "dout_pclk_m2m_100",
+			"mout_aclk_m2m_400_user",
+			DIV_GSCL, 0, 3),
+	DIV(GSCL_DOUT_ACLK_CSIS_200, "dout_aclk_csis_200",
+			"mout_aclk_m2m_400_user",
+			DIV_GSCL, 4, 3),
+};
+
+struct samsung_gate_clock gscl_gate_clks[] __initdata = {
+	GATE(GSCL_SCLK_CSIS0_WRAP, "sclk_csis0_wrap", "dout_aclk_csis_200",
+			EN_SCLK_GSCL_FIMC, 0, CLK_SET_RATE_PARENT, 0),
+	GATE(GSCL_SCLK_CSIS1_WRAP, "sclk_csis1_wrap", "dout_aclk_csis_200",
+			EN_SCLK_GSCL_FIMC, 1, CLK_SET_RATE_PARENT, 0),
+
+	GATE(GSCL_CLK_GSCL0, "clk_gscl0", "mout_aclk_gscl_333_user",
+			EN_IP_GSCL, 2, 0, 0),
+	GATE(GSCL_CLK_GSCL1, "clk_gscl1", "mout_aclk_gscl_333_user",
+			EN_IP_GSCL, 3, 0, 0),
+	GATE(GSCL_CLK_MSCL0, "clk_mscl0", "mout_aclk_gscl_333_user",
+			EN_IP_GSCL, 4, 0, 0),
+	GATE(GSCL_CLK_MSCL1, "clk_mscl1", "mout_aclk_gscl_333_user",
+			EN_IP_GSCL, 5, 0, 0),
+	GATE(GSCL_CLK_PIXEL_GSCL0, "clk_pixel_gscl0",
+			"mout_aclk_gscl_333_user",
+			EN_IP_GSCL, 8, 0, 0),
+	GATE(GSCL_CLK_PIXEL_GSCL1, "clk_pixel_gscl1",
+			"mout_aclk_gscl_333_user",
+			EN_IP_GSCL, 9, 0, 0),
+
+	GATE(GSCL_CLK_SMMU3_LITE_A, "clk_smmu3_lite_a",
+			"mout_aclk_gscl_fimc_user",
+			EN_IP_GSCL_FIMC, 5, 0, 0),
+	GATE(GSCL_CLK_SMMU3_LITE_B, "clk_smmu3_lite_b",
+			"mout_aclk_gscl_fimc_user",
+			EN_IP_GSCL_FIMC, 6, 0, 0),
+	GATE(GSCL_CLK_SMMU3_LITE_D, "clk_smmu3_lite_d",
+			"mout_aclk_gscl_fimc_user",
+			EN_IP_GSCL_FIMC, 7, 0, 0),
+	GATE(GSCL_CLK_CSIS0, "clk_csis0", "mout_aclk_gscl_fimc_user",
+			EN_IP_GSCL_FIMC, 8, 0, 0),
+	GATE(GSCL_CLK_CSIS1, "clk_csis1", "mout_aclk_gscl_fimc_user",
+			EN_IP_GSCL_FIMC, 9, 0, 0),
+	GATE(GSCL_CLK_FIMC_LITE_A, "clk_fimc_lite_a",
+			"mout_aclk_gscl_fimc_user",
+			EN_IP_GSCL_FIMC, 10, 0, 0),
+	GATE(GSCL_CLK_FIMC_LITE_B, "clk_fimc_lite_b",
+			"mout_aclk_gscl_fimc_user",
+			EN_IP_GSCL_FIMC, 11, 0, 0),
+	GATE(GSCL_CLK_FIMC_LITE_D, "clk_fimc_lite_d",
+			"mout_aclk_gscl_fimc_user",
+			EN_IP_GSCL_FIMC, 12, 0, 0),
+
+	GATE(GSCL_CLK_SMMU3_GSCL0, "clk_smmu3_gscl0",
+			"mout_aclk_gscl_333_user",
+			EN_IP_GSCL_SECURE_SMMU_GSCL0, 17, 0, 0),
+	GATE(GSCL_CLK_SMMU3_GSCL1, "clk_smmu3_gscl1", "mout_aclk_gscl_333_user",
+			EN_IP_GSCL_SECURE_SMMU_GSCL1, 18, 0, 0),
+	GATE(GSCL_CLK_SMMU3_MSCL0, "clk_smmu3_mscl0",
+			"mout_aclk_m2m_400_user",
+			EN_IP_GSCL_SECURE_SMMU_MSCL0, 19, 0, 0),
+	GATE(GSCL_CLK_SMMU3_MSCL1, "clk_smmu3_mscl1",
+			"mout_aclk_m2m_400_user",
+			EN_IP_GSCL_SECURE_SMMU_MSCL1, 20, 0, 0),
+};
+
+static void __init exynos5260_clk_gscl_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.mux_clks = gscl_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(gscl_mux_clks);
+	cmu.div_clks = gscl_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(gscl_div_clks);
+	cmu.gate_clks = gscl_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(gscl_gate_clks);
+	cmu.nr_clk_ids = GSCL_NR_CLK;
+	cmu.clk_regs = gscl_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(gscl_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_gscl, "samsung,exynos5260-clock-gscl",
+		exynos5260_clk_gscl_init);
+
+
+/* CMU_ISP */
+
+static unsigned long isp_clk_regs[] __initdata = {
+	MUX_SEL_ISP0,
+	MUX_SEL_ISP1,
+	DIV_ISP,
+	EN_ACLK_ISP0,
+	EN_ACLK_ISP1,
+	EN_PCLK_ISP0,
+	EN_PCLK_ISP1,
+	EN_SCLK_ISP,
+	EN_IP_ISP0,
+	EN_IP_ISP1,
+};
+
+PNAME(mout_isp_400_user_p) = {"fin_pll", "dout_aclk_isp1_400"};
+PNAME(mout_isp_266_user_p)	 = {"fin_pll", "dout_aclk_isp1_266"};
+
+struct samsung_mux_clock isp_mux_clks[] __initdata = {
+	MUX(ISP_MOUT_ISP_266_USER, "mout_isp_266_user", mout_isp_266_user_p,
+			MUX_SEL_ISP0, 0, 1),
+	MUX(ISP_MOUT_ISP_400_USER, "mout_isp_400_user", mout_isp_400_user_p,
+			MUX_SEL_ISP0, 4, 1),
+};
+
+struct samsung_div_clock isp_div_clks[] __initdata = {
+	DIV(ISP_DOUT_PCLK_ISP_66, "dout_pclk_isp_66", "mout_kfc",
+			DIV_ISP, 0, 3),
+	DIV(ISP_DOUT_PCLK_ISP_133, "dout_pclk_isp_133", "mout_kfc",
+			DIV_ISP, 4, 4),
+	DIV(ISP_DOUT_CA5_ATCLKIN, "dout_ca5_atclkin", "mout_kfc",
+			DIV_ISP, 12, 3),
+	DIV(ISP_DOUT_CA5_PCLKDBG, "dout_ca5_pclkdbg", "mout_kfc",
+			DIV_ISP, 16, 4),
+	DIV(ISP_DOUT_SCLK_MPWM, "dout_sclk_mpwm", "mout_kfc", DIV_ISP, 20, 2),
+};
+
+struct samsung_gate_clock isp_gate_clks[] __initdata = {
+	GATE(ISP_CLK_GIC, "clk_isp_gic", "mout_aclk_isp1_266",
+			EN_IP_ISP0, 15, 0, 0),
+
+	GATE(ISP_CLK_CA5, "clk_isp_ca5", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 1, 0, 0),
+	GATE(ISP_CLK_FIMC_DRC, "clk_isp_fimc_drc", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 2, 0, 0),
+	GATE(ISP_CLK_FIMC_FD, "clk_isp_fimc_fd", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 3, 0, 0),
+	GATE(ISP_CLK_FIMC, "clk_isp_fimc", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 4, 0, 0),
+	GATE(ISP_CLK_FIMC_SCALERC, "clk_isp_fimc_scalerc",
+			"mout_aclk_isp1_266",
+			EN_IP_ISP1, 5, 0, 0),
+	GATE(ISP_CLK_FIMC_SCALERP, "clk_isp_fimc_scalerp",
+			"mout_aclk_isp1_266",
+			EN_IP_ISP1, 6, 0, 0),
+	GATE(ISP_CLK_I2C0, "clk_isp_i2c0", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 7, 0, 0),
+	GATE(ISP_CLK_I2C1, "clk_isp_i2c1", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 8, 0, 0),
+	GATE(ISP_CLK_MCUCTL, "clk_isp_mcuctl", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 9, 0, 0),
+	GATE(ISP_CLK_MPWM, "clk_isp_mpwm", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 10, 0, 0),
+	GATE(ISP_CLK_MTCADC, "clk_isp_mtcadc", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 11, 0, 0),
+	GATE(ISP_CLK_PWM, "clk_isp_pwm", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 14, 0, 0),
+	GATE(ISP_CLK_SMMU_DRC, "clk_smmu_drc", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 21, 0, 0),
+	GATE(ISP_CLK_SMMU_FD, "clk_smmu_fd", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 22, 0, 0),
+	GATE(ISP_CLK_SMMU_ISP, "clk_smmu_isp", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 23, 0, 0),
+	GATE(ISP_CLK_SMMU_ISPCX, "clk_smmu_ispcx", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 24, 0, 0),
+	GATE(ISP_CLK_SMMU_SCALERC, "clk_isp_smmu_scalerc",
+			"mout_aclk_isp1_266",
+			EN_IP_ISP1, 25, 0, 0),
+	GATE(ISP_CLK_SMMU_SCALERP, "clk_isp_smmu_scalerp",
+			"mout_aclk_isp1_266",
+			EN_IP_ISP1, 26, 0, 0),
+	GATE(ISP_CLK_SPI0, "clk_isp_spi0", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 27, 0, 0),
+	GATE(ISP_CLK_SPI1, "clk_isp_spi1", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 28, 0, 0),
+	GATE(ISP_CLK_WDT, "clk_isp_wdt", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 31, 0, 0),
+	GATE(ISP_CLK_UART, "clk_isp_uart", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 30, 0, 0),
+
+	GATE(ISP_SCLK_UART_EXT, "sclk_isp_uart_ext", "fin_pll",
+			EN_SCLK_ISP, 7, CLK_SET_RATE_PARENT, 0),
+	GATE(ISP_SCLK_SPI1_EXT, "sclk_isp_spi1_ext", "fin_pll",
+			EN_SCLK_ISP, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(ISP_SCLK_SPI0_EXT, "sclk_isp_spi0_ext", "fin_pll",
+			EN_SCLK_ISP, 9, CLK_SET_RATE_PARENT, 0),
+};
+
+static void __init exynos5260_clk_isp_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.mux_clks = isp_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(isp_mux_clks);
+	cmu.div_clks = isp_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(isp_div_clks);
+	cmu.gate_clks = isp_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(isp_gate_clks);
+	cmu.nr_clk_ids = ISP_NR_CLK;
+	cmu.clk_regs = isp_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(isp_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_isp, "samsung,exynos5260-clock-isp",
+		exynos5260_clk_isp_init);
+
+
+/* CMU_KFC */
+
+static unsigned long kfc_clk_regs[] __initdata = {
+	KFC_PLL_LOCK,
+	KFC_PLL_CON0,
+	KFC_PLL_CON1,
+	KFC_PLL_FDET,
+	MUX_SEL_KFC0,
+	MUX_SEL_KFC2,
+	DIV_KFC,
+	DIV_KFC_PLL_FDET,
+	EN_ACLK_KFC,
+	EN_PCLK_KFC,
+	EN_SCLK_KFC,
+	EN_IP_KFC,
+};
+
+PNAME(mout_kfc_pll_p) = {"fin_pll", "fout_kfc_pll"};
+PNAME(mout_kfc_p)	 = {"mout_kfc_pll", "dout_media_pll"};
+
+struct samsung_mux_clock kfc_mux_clks[] __initdata = {
+	MUX(KFC_MOUT_KFC_PLL, "mout_kfc_pll", mout_kfc_pll_p,
+			MUX_SEL_KFC0, 0, 1),
+	MUX(KFC_MOUT_KFC, "mout_kfc", mout_kfc_p, MUX_SEL_KFC2, 0, 1),
+};
+
+struct samsung_div_clock kfc_div_clks[] __initdata = {
+	DIV(KFC_DOUT_KFC1, "dout_kfc1", "mout_kfc", DIV_KFC, 0, 3),
+	DIV(KFC_DOUT_KFC2, "dout_kfc2", "dout_kfc1", DIV_KFC, 4, 3),
+	DIV(KFC_DOUT_KFC_ATCLK, "dout_kfc_atclk", "dout_kfc2", DIV_KFC, 8, 3),
+	DIV(KFC_DOUT_KFC_PCLK_DBG, "dout_kfc_pclk_dbg", "dout_kfc2",
+			DIV_KFC, 12, 3),
+	DIV(KFC_DOUT_ACLK_KFC, "dout_aclk_kfc", "dout_kfc2", DIV_KFC, 16, 3),
+	DIV(KFC_DOUT_PCLK_KFC, "dout_pclk_kfc", "dout_kfc2", DIV_KFC, 20, 3),
+	DIV(KFC_DOUT_KFC_PLL, "dout_kfc_pll", "mout_kfc", DIV_KFC, 24, 3),
+};
+
+static struct samsung_pll_clock kfc_pll_clks[] __initdata = {
+	PLL(pll_2550xx, KFC_FOUT_KFC_PLL, "fout_kfc_pll", "fin_pll",
+		KFC_PLL_LOCK, KFC_PLL_CON0,
+		pll2550_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_kfc_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.pll_clks = kfc_pll_clks;
+	cmu.nr_pll_clks =  ARRAY_SIZE(kfc_pll_clks);
+	cmu.mux_clks = kfc_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(kfc_mux_clks);
+	cmu.div_clks = kfc_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(kfc_div_clks);
+	cmu.nr_clk_ids = KFC_NR_CLK;
+	cmu.clk_regs = kfc_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(kfc_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_kfc, "samsung,exynos5260-clock-kfc",
+		exynos5260_clk_kfc_init);
+
+
+/* CMU_MFC */
+
+static unsigned long mfc_clk_regs[] __initdata = {
+	MUX_SEL_MFC,
+	DIV_MFC,
+	EN_ACLK_MFC,
+	EN_ACLK_SECURE_SMMU2_MFC,
+	EN_PCLK_MFC,
+	EN_PCLK_SECURE_SMMU2_MFC,
+	EN_IP_MFC,
+	EN_IP_MFC_SECURE_SMMU2_MFC,
+};
+
+PNAME(mout_aclk_mfc_333_user_p) = {"fin_pll", "dout_aclk_mfc_333"};
+
+struct samsung_mux_clock mfc_mux_clks[] __initdata = {
+	MUX(MFC_MOUT_ACLK_MFC_333_USER, "mout_aclk_mfc_333_user",
+			mout_aclk_mfc_333_user_p,
+			MUX_SEL_MFC, 0, 1),
+};
+
+struct samsung_div_clock mfc_div_clks[] __initdata = {
+	DIV(MFC_DOUT_PCLK_MFC_83, "dout_pclk_mfc_83", "mout_aclk_mfc_333_user",
+			DIV_MFC, 0, 3),
+};
+
+struct samsung_gate_clock mfc_gate_clks[] __initdata = {
+	GATE(MFC_CLK_MFC, "clk_mfc", "mout_aclk_mfc_333_user",
+			EN_IP_MFC, 1, 0, 0),
+	GATE(MFC_CLK_SMMU2_MFCM0, "clk_smmu2_mfcm0", "mout_aclk_mfc_333_user",
+			EN_IP_MFC_SECURE_SMMU2_MFC, 6, 0, 0),
+	GATE(MFC_CLK_SMMU2_MFCM1, "clk_smmu2_mfcm1", "mout_aclk_mfc_333_user",
+			EN_IP_MFC_SECURE_SMMU2_MFC, 7, 0, 0),
+};
+
+static void __init exynos5260_clk_mfc_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.mux_clks = mfc_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(mfc_mux_clks);
+	cmu.div_clks = mfc_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(mfc_div_clks);
+	cmu.gate_clks = mfc_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(mfc_gate_clks);
+	cmu.nr_clk_ids = MFC_NR_CLK;
+	cmu.clk_regs = mfc_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(mfc_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_mfc, "samsung,exynos5260-clock-mfc",
+		exynos5260_clk_mfc_init);
+
+
+/* CMU_MIF */
+
+static unsigned long mif_clk_regs[] __initdata = {
+	MEM_PLL_LOCK,
+	BUS_PLL_LOCK,
+	MEDIA_PLL_LOCK,
+	MEM_PLL_CON0,
+	MEM_PLL_CON1,
+	MEM_PLL_FDET,
+	BUS_PLL_CON0,
+	BUS_PLL_CON1,
+	BUS_PLL_FDET,
+	MEDIA_PLL_CON0,
+	MEDIA_PLL_CON1,
+	MEDIA_PLL_FDET,
+	MUX_SEL_MIF,
+	DIV_MIF,
+	DIV_MIF_PLL_FDET,
+	EN_ACLK_MIF,
+	EN_ACLK_MIF_SECURE_DREX1_TZ,
+	EN_ACLK_MIF_SECURE_DREX0_TZ,
+	EN_ACLK_MIF_SECURE_INTMEM,
+	EN_PCLK_MIF,
+	EN_PCLK_MIF_SECURE_MONOCNT,
+	EN_PCLK_MIF_SECURE_RTC_APBIF,
+	EN_PCLK_MIF_SECURE_DREX1_TZ,
+	EN_PCLK_MIF_SECURE_DREX0_TZ,
+	EN_SCLK_MIF,
+	EN_IP_MIF,
+	EN_IP_MIF_SECURE_MONOCNT,
+	EN_IP_MIF_SECURE_RTC_APBIF,
+	EN_IP_MIF_SECURE_DREX1_TZ,
+	EN_IP_MIF_SECURE_DREX0_TZ,
+	EN_IP_MIF_SECURE_INTEMEM,
+};
+
+PNAME(mout_mem_pll_p) = {"fin_pll", "fout_mem_pll"};
+PNAME(mout_bus_pll_p) = {"fin_pll", "fout_bus_pll"};
+PNAME(mout_media_pll_p) = {"fin_pll", "fout_media_pll"};
+PNAME(mout_mif_drex_p) = {"dout_mem_pll", "dout_bus_pll"};
+PNAME(mout_mif_drex2x_p) = {"dout_mem_pll", "dout_bus_pll"};
+PNAME(mout_clkm_phy_p) = {"mout_mif_drex", "dout_media_pll"};
+PNAME(mout_clk2x_phy_p) = {"mout_mif_drex2x", "dout_media_pll"};
+
+struct samsung_mux_clock mif_mux_clks[] __initdata = {
+	MUX(MIF_MOUT_MEM_PLL, "mout_mem_pll", mout_mem_pll_p,
+			MUX_SEL_MIF, 0, 1),
+	MUX(MIF_MOUT_BUS_PLL, "mout_bus_pll", mout_bus_pll_p,
+			MUX_SEL_MIF, 4, 1),
+	MUX(MIF_MOUT_MEDIA_PLL, "mout_media_pll", mout_media_pll_p,
+			MUX_SEL_MIF, 8, 1),
+	MUX(MIF_MOUT_MIF_DREX, "mout_mif_drex", mout_mif_drex_p,
+			MUX_SEL_MIF, 12, 1),
+	MUX(MIF_MOUT_CLKM_PHY, "mout_clkm_phy", mout_clkm_phy_p,
+			MUX_SEL_MIF, 16, 1),
+	MUX(MIF_MOUT_MIF_DREX2X, "mout_mif_drex2x", mout_mif_drex2x_p,
+			MUX_SEL_MIF, 20, 1),
+	MUX(MIF_MOUT_CLK2X_PHY, "mout_clk2x_phy", mout_clk2x_phy_p,
+			MUX_SEL_MIF, 24, 1),
+};
+
+struct samsung_div_clock mif_div_clks[] __initdata = {
+	DIV(MIF_DOUT_MEDIA_PLL, "dout_media_pll", "mout_media_pll",
+			DIV_MIF, 0, 3),
+	DIV(MIF_DOUT_MEM_PLL, "dout_mem_pll", "mout_mem_pll",
+			DIV_MIF, 4, 3),
+	DIV(MIF_DOUT_BUS_PLL, "dout_bus_pll", "mout_bus_pll",
+			DIV_MIF, 8, 3),
+	DIV(MIF_DOUT_CLKM_PHY, "dout_clkm_phy", "mout_clkm_phy",
+			DIV_MIF, 12, 3),
+	DIV(MIF_DOUT_CLK2X_PHY, "dout_clk2x_phy", "mout_clk2x_phy",
+			DIV_MIF, 16, 4),
+	DIV(MIF_DOUT_ACLK_MIF_466, "dout_aclk_mif_466", "dout_clk2x_phy",
+			DIV_MIF, 20, 3),
+	DIV(MIF_DOUT_ACLK_BUS_200, "dout_aclk_bus_200", "dout_bus_pll",
+			DIV_MIF, 24, 3),
+	DIV(MIF_DOUT_ACLK_BUS_100, "dout_aclk_bus_100", "dout_bus_pll",
+			DIV_MIF, 28, 4),
+};
+
+struct samsung_gate_clock mif_gate_clks[] __initdata = {
+	GATE(MIF_CLK_LPDDR3PHY_WRAP0, "clk_lpddr3phy_wrap0", "dout_clk2x_phy",
+			EN_IP_MIF, 12, CLK_IGNORE_UNUSED, 0),
+	GATE(MIF_CLK_LPDDR3PHY_WRAP1, "clk_lpddr3phy_wrap1", "dout_clk2x_phy",
+			EN_IP_MIF, 13, CLK_IGNORE_UNUSED, 0),
+
+	GATE(MIF_CLK_MONOCNT, "clk_monocnt", "dout_aclk_bus_100",
+			EN_IP_MIF_SECURE_MONOCNT, 22,
+			CLK_IGNORE_UNUSED, 0),
+
+	GATE(MIF_CLK_MIF_RTC, "clk_mif_rtc", "dout_aclk_bus_100",
+			EN_IP_MIF_SECURE_RTC_APBIF, 23,
+			CLK_IGNORE_UNUSED, 0),
+
+	GATE(MIF_CLK_DREX1, "clk_drex1", "dout_aclk_mif_466",
+			EN_IP_MIF_SECURE_DREX1_TZ, 9,
+			CLK_IGNORE_UNUSED, 0),
+
+	GATE(MIF_CLK_DREX0, "clk_drex0", "dout_aclk_mif_466",
+			EN_IP_MIF_SECURE_DREX0_TZ, 9,
+			CLK_IGNORE_UNUSED, 0),
+
+	GATE(MIF_CLK_INTMEM, "clk_intmem", "dout_aclk_bus_200",
+			EN_IP_MIF_SECURE_INTEMEM, 11,
+			CLK_IGNORE_UNUSED, 0),
+
+	GATE(MIF_SCLK_LPDDR3PHY_WRAP_U0, "sclk_lpddr3phy_wrap_u0",
+			"dout_clkm_phy", EN_SCLK_MIF, 0,
+			CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+	GATE(MIF_SCLK_LPDDR3PHY_WRAP_U1, "sclk_lpddr3phy_wrap_u1",
+			"dout_clkm_phy", EN_SCLK_MIF, 1,
+			CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+};
+
+static struct samsung_pll_clock mif_pll_clks[] __initdata = {
+	PLL(pll_2550xx, MIF_FOUT_MEM_PLL, "fout_mem_pll", "fin_pll",
+		MEM_PLL_LOCK, MEM_PLL_CON0,
+		pll2550_24mhz_tbl),
+	PLL(pll_2550xx, MIF_FOUT_BUS_PLL, "fout_bus_pll", "fin_pll",
+		BUS_PLL_LOCK, BUS_PLL_CON0,
+		pll2550_24mhz_tbl),
+	PLL(pll_2550xx, MIF_FOUT_MEDIA_PLL, "fout_media_pll", "fin_pll",
+		MEDIA_PLL_LOCK, MEDIA_PLL_CON0,
+		pll2550_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_mif_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.pll_clks = mif_pll_clks;
+	cmu.nr_pll_clks =  ARRAY_SIZE(mif_pll_clks);
+	cmu.mux_clks = mif_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(mif_mux_clks);
+	cmu.div_clks = mif_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(mif_div_clks);
+	cmu.gate_clks = mif_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(mif_gate_clks);
+	cmu.nr_clk_ids = MIF_NR_CLK;
+	cmu.clk_regs = mif_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(mif_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_mif, "samsung,exynos5260-clock-mif",
+		exynos5260_clk_mif_init);
+
+
+/* CMU_PERI */
+
+static unsigned long peri_clk_regs[] __initdata = {
+	MUX_SEL_PERI,
+	MUX_SEL_PERI1,
+	DIV_PERI,
+	EN_PCLK_PERI0,
+	EN_PCLK_PERI1,
+	EN_PCLK_PERI2,
+	EN_PCLK_PERI3,
+	EN_PCLK_PERI_SECURE_CHIPID,
+	EN_PCLK_PERI_SECURE_PROVKEY0,
+	EN_PCLK_PERI_SECURE_PROVKEY1,
+	EN_PCLK_PERI_SECURE_SECKEY,
+	EN_PCLK_PERI_SECURE_ANTIRBKCNT,
+	EN_PCLK_PERI_SECURE_TOP_RTC,
+	EN_PCLK_PERI_SECURE_TZPC,
+	EN_SCLK_PERI,
+	EN_SCLK_PERI_SECURE_TOP_RTC,
+	EN_IP_PERI0,
+	EN_IP_PERI1,
+	EN_IP_PERI2,
+	EN_IP_PERI_SECURE_CHIPID,
+	EN_IP_PERI_SECURE_PROVKEY0,
+	EN_IP_PERI_SECURE_PROVKEY1,
+	EN_IP_PERI_SECURE_SECKEY,
+	EN_IP_PERI_SECURE_ANTIRBKCNT,
+	EN_IP_PERI_SECURE_TOP_RTC,
+	EN_IP_PERI_SECURE_TZPC,
+};
+
+PNAME(mout_sclk_pcm_p) = {"ioclk_pcm_extclk", "fin_pll", "dout_aclk_peri_aud",
+			"phyclk_hdmi_phy_ref_cko"};
+PNAME(mout_sclk_i2scod_p) = {"ioclk_i2s_cdclk", "fin_pll", "dout_aclk_peri_aud",
+			"phyclk_hdmi_phy_ref_cko"};
+PNAME(mout_sclk_spdif_p) = {"ioclk_spdif_extclk", "fin_pll",
+			"dout_aclk_peri_aud", "phyclk_hdmi_phy_ref_cko"};
+
+struct samsung_mux_clock peri_mux_clks[] __initdata = {
+	MUX(PERI_MOUT_SCLK_PCM, "mout_sclk_pcm", mout_sclk_pcm_p,
+			MUX_SEL_PERI1, 4, 2),
+	MUX(PERI_MOUT_SCLK_I2SCOD, "mout_sclk_i2scod", mout_sclk_i2scod_p,
+			MUX_SEL_PERI1, 12, 2),
+	MUX(PERI_MOUT_SCLK_SPDIF, "mout_sclk_spdif", mout_sclk_spdif_p,
+			MUX_SEL_PERI1, 20, 2),
+};
+
+struct samsung_div_clock peri_div_clks[] __initdata = {
+	DIV(PERI_DOUT_PCM, "dout_pcm", "mout_sclk_pcm", DIV_PERI, 0, 8),
+	DIV(PERI_DOUT_I2S, "dout_i2s", "mout_sclk_i2scod", DIV_PERI, 8, 6),
+};
+
+struct samsung_gate_clock peri_gate_clks[] __initdata = {
+	GATE(PERI_SCLK_PCM1, "sclk_pcm1", "dout_pcm", EN_SCLK_PERI, 0,
+			CLK_SET_RATE_PARENT, 0),
+	GATE(PERI_SCLK_I2S, "sclk_i2s", "dout_i2s", EN_SCLK_PERI, 1,
+			CLK_SET_RATE_PARENT, 0),
+	GATE(PERI_SCLK_SPDIF, "sclk_spdif", "dout_sclk_peri_spi0_b",
+			EN_SCLK_PERI, 2, CLK_SET_RATE_PARENT, 0),
+	GATE(PERI_SCLK_SPI0, "sclk_spi0", "dout_sclk_peri_spi0_b",
+			EN_SCLK_PERI, 7, CLK_SET_RATE_PARENT, 0),
+	GATE(PERI_SCLK_SPI1, "sclk_spi1", "dout_sclk_peri_spi1_b",
+			EN_SCLK_PERI, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(PERI_SCLK_SPI2, "sclk_spi2", "dout_sclk_peri_spi2_b",
+			EN_SCLK_PERI, 9, CLK_SET_RATE_PARENT, 0),
+	GATE(PERI_SCLK_UART0, "sclk_uart0", "dout_sclk_peri_uart0",
+			EN_SCLK_PERI, 10, CLK_SET_RATE_PARENT, 0),
+	GATE(PERI_SCLK_UART1, "sclk_uart1", "dout_sclk_peri_uart1",
+			EN_SCLK_PERI, 11, CLK_SET_RATE_PARENT, 0),
+	GATE(PERI_SCLK_UART2, "sclk_uart2", "dout_sclk_peri_uart2",
+			EN_SCLK_PERI, 12, CLK_SET_RATE_PARENT, 0),
+
+	GATE(PERI_CLK_ABB, "clk_abb", "dout_aclk_peri_66",
+		EN_IP_PERI0, 1, 0, 0),
+	GATE(PERI_CLK_EFUSE_WRITER, "clk_efuse_writer", "dout_aclk_peri_66",
+		EN_IP_PERI0, 5, 0, 0),
+	GATE(PERI_CLK_HDMICEC, "clk_hdmicec", "dout_aclk_peri_66",
+		EN_IP_PERI0, 6, 0, 0),
+	GATE(PERI_CLK_I2C10, "clk_i2c10", "dout_aclk_peri_66",
+		EN_IP_PERI0, 7, 0, 0),
+	GATE(PERI_CLK_I2C11, "clk_i2c11", "dout_aclk_peri_66",
+		EN_IP_PERI0, 8, 0, 0),
+	GATE(PERI_CLK_I2C8, "clk_i2c8", "dout_aclk_peri_66",
+		EN_IP_PERI0, 9, 0, 0),
+	GATE(PERI_CLK_I2C9, "clk_i2c9", "dout_aclk_peri_66",
+		EN_IP_PERI0, 10, 0, 0),
+	GATE(PERI_CLK_I2C4, "clk_i2c4", "dout_aclk_peri_66",
+		EN_IP_PERI0, 11, 0, 0),
+	GATE(PERI_CLK_I2C5, "clk_i2c5", "dout_aclk_peri_66",
+		EN_IP_PERI0, 12, 0, 0),
+	GATE(PERI_CLK_I2C6, "clk_i2c6", "dout_aclk_peri_66",
+		EN_IP_PERI0, 13, 0, 0),
+	GATE(PERI_CLK_I2C7, "clk_i2c7", "dout_aclk_peri_66",
+		EN_IP_PERI0, 14, 0, 0),
+	GATE(PERI_CLK_I2CHDMI, "clk_i2chdmi", "dout_aclk_peri_66",
+		EN_IP_PERI0, 15, 0, 0),
+	GATE(PERI_CLK_I2S, "clk_peri_i2s", "dout_aclk_peri_66",
+		EN_IP_PERI0, 16, 0, 0),
+	GATE(PERI_CLK_MCT, "clk_mct", "dout_aclk_peri_66",
+		EN_IP_PERI0, 17, 0, 0),
+	GATE(PERI_CLK_PCM, "clk_peri_pcm", "dout_aclk_peri_66",
+		EN_IP_PERI0, 18, 0, 0),
+	GATE(PERI_CLK_HSIC0, "clk_hsic0", "dout_aclk_peri_66",
+		EN_IP_PERI0, 20, 0, 0),
+	GATE(PERI_CLK_HSIC1, "clk_hsic1", "dout_aclk_peri_66",
+		EN_IP_PERI0, 21, 0, 0),
+	GATE(PERI_CLK_HSIC2, "clk_hsic2", "dout_aclk_peri_66",
+		EN_IP_PERI0, 22, 0, 0),
+	GATE(PERI_CLK_HSIC3, "clk_hsic3", "dout_aclk_peri_66",
+		EN_IP_PERI0, 23, 0, 0),
+	GATE(PERI_CLK_WDT_EGL, "clk_wdt_egl", "dout_aclk_peri_66",
+		EN_IP_PERI0, 24, 0, 0),
+	GATE(PERI_CLK_WDT_KFC, "clk_wdt_kfc", "dout_aclk_peri_66",
+		EN_IP_PERI0, 25, 0, 0),
+
+	GATE(PERI_CLK_UART4, "clk_uart4", "dout_aclk_peri_66",
+		EN_IP_PERI2, 0, 0, 0),
+	GATE(PERI_CLK_PWM, "clk_pwm", "dout_aclk_peri_66",
+		EN_IP_PERI2, 3, 0, 0),
+	GATE(PERI_CLK_SPDIF, "clk_spdif", "dout_aclk_peri_66",
+		EN_IP_PERI2, 6, 0, 0),
+	GATE(PERI_CLK_SPI0, "clk_spi0", "dout_aclk_peri_66",
+		EN_IP_PERI2, 7, 0, 0),
+	GATE(PERI_CLK_SPI1, "clk_spi1", "dout_aclk_peri_66",
+		EN_IP_PERI2, 8, 0, 0),
+	GATE(PERI_CLK_SPI2, "clk_spi2", "dout_aclk_peri_66",
+		EN_IP_PERI2, 9, 0, 0),
+	GATE(PERI_CLK_TMU0, "clk_tmu0", "dout_aclk_peri_66",
+		EN_IP_PERI2, 10, 0, 0),
+	GATE(PERI_CLK_TMU1, "clk_tmu1", "dout_aclk_peri_66",
+		EN_IP_PERI2, 11, 0, 0),
+	GATE(PERI_CLK_TMU2, "clk_tmu2", "dout_aclk_peri_66",
+		EN_IP_PERI2, 12, 0, 0),
+	GATE(PERI_CLK_TMU3, "clk_tmu3", "dout_aclk_peri_66",
+		EN_IP_PERI2, 13, 0, 0),
+	GATE(PERI_CLK_TMU4, "clk_tmu4", "dout_aclk_peri_66",
+		EN_IP_PERI2, 14, 0, 0),
+	GATE(PERI_CLK_ADC, "clk_adc", "dout_aclk_peri_66",
+		EN_IP_PERI2, 18, 0, 0),
+	GATE(PERI_CLK_UART0, "clk_uart0", "dout_aclk_peri_66",
+		EN_IP_PERI2, 19, 0, 0),
+	GATE(PERI_CLK_UART1, "clk_uart1", "dout_aclk_peri_66",
+		EN_IP_PERI2, 20, 0, 0),
+	GATE(PERI_CLK_UART2, "clk_uart2", "dout_aclk_peri_66",
+		EN_IP_PERI2, 21, 0, 0),
+
+	GATE(PERI_CLK_CHIPID, "clk_chipid", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_CHIPID, 2, 0, 0),
+
+	GATE(PERI_CLK_PROVKEY0, "clk_provkey0", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_PROVKEY0, 1, 0, 0),
+
+	GATE(PERI_CLK_PROVKEY1, "clk_provkey1", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_PROVKEY1, 2, 0, 0),
+
+	GATE(PERI_CLK_SECKEY, "clk_seckey", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_SECKEY, 5, 0, 0),
+
+	GATE(PERI_CLK_TOP_RTC, "clk_top_rtc", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TOP_RTC, 5, 0, 0),
+
+	GATE(PERI_CLK_TZPC0, "clk_tzpc0", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 10, 0, 0),
+	GATE(PERI_CLK_TZPC1, "clk_tzpc1", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 11, 0, 0),
+	GATE(PERI_CLK_TZPC2, "clk_tzpc2", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 12, 0, 0),
+	GATE(PERI_CLK_TZPC3, "clk_tzpc3", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 13, 0, 0),
+	GATE(PERI_CLK_TZPC4, "clk_tzpc4", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 14, 0, 0),
+	GATE(PERI_CLK_TZPC5, "clk_tzpc5", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 15, 0, 0),
+	GATE(PERI_CLK_TZPC6, "clk_tzpc6", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 16, 0, 0),
+	GATE(PERI_CLK_TZPC7, "clk_tzpc7", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 17, 0, 0),
+	GATE(PERI_CLK_TZPC8, "clk_tzpc8", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 18, 0, 0),
+	GATE(PERI_CLK_TZPC9, "clk_tzpc9", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 19, 0, 0),
+	GATE(PERI_CLK_TZPC10, "clk_tzpc10", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 20, 0, 0),
+};
+
+static void __init exynos5260_clk_peri_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.mux_clks = peri_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(peri_mux_clks);
+	cmu.div_clks = peri_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(peri_div_clks);
+	cmu.gate_clks = peri_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(peri_gate_clks);
+	cmu.nr_clk_ids = PERI_NR_CLK;
+	cmu.clk_regs = peri_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(peri_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_peri, "samsung,exynos5260-clock-peri",
+		exynos5260_clk_peri_init);
+
+
+/* CMU_TOP */
+
+static unsigned long top_clk_regs[] __initdata = {
+	DISP_PLL_LOCK,
+	AUD_PLL_LOCK,
+	DISP_PLL_CON0,
+	DISP_PLL_CON1,
+	DISP_PLL_FDET,
+	AUD_PLL_CON0,
+	AUD_PLL_CON1,
+	AUD_PLL_CON2,
+	AUD_PLL_FDET,
+	MUX_SEL_TOP_PLL0,
+	MUX_SEL_TOP_MFC,
+	MUX_SEL_TOP_G2D,
+	MUX_SEL_TOP_GSCL,
+	MUX_SEL_TOP_ISP10,
+	MUX_SEL_TOP_ISP11,
+	MUX_SEL_TOP_DISP0,
+	MUX_SEL_TOP_DISP1,
+	MUX_SEL_TOP_BUS,
+	MUX_SEL_TOP_PERI0,
+	MUX_SEL_TOP_PERI1,
+	MUX_SEL_TOP_FSYS,
+	DIV_TOP_G2D_MFC,
+	DIV_TOP_GSCL_ISP0,
+	DIV_TOP_ISP10,
+	DIV_TOP_ISP11,
+	DIV_TOP_DISP,
+	DIV_TOP_BUS,
+	DIV_TOP_PERI0,
+	DIV_TOP_PERI1,
+	DIV_TOP_PERI2,
+	DIV_TOP_FSYS0,
+	DIV_TOP_FSYS1,
+	DIV_TOP_HPM,
+	DIV_TOP_PLL_FDET,
+	EN_ACLK_TOP,
+	EN_SCLK_TOP,
+	EN_IP_TOP,
+};
+
+/* fixed rate clocks generated inside the soc */
+struct samsung_fixed_rate_clock fixed_rate_clks[] __initdata = {
+	FRATE(PHYCLK_DPTX_PHY_CH3_TXD_CLK, "phyclk_dptx_phy_ch3_txd_clk", NULL,
+			CLK_IS_ROOT, 270000000),
+	FRATE(PHYCLK_DPTX_PHY_CH2_TXD_CLK, "phyclk_dptx_phy_ch2_txd_clk", NULL,
+			CLK_IS_ROOT, 270000000),
+	FRATE(PHYCLK_DPTX_PHY_CH1_TXD_CLK, "phyclk_dptx_phy_ch1_txd_clk", NULL,
+			CLK_IS_ROOT, 270000000),
+	FRATE(PHYCLK_DPTX_PHY_CH0_TXD_CLK, "phyclk_dptx_phy_ch0_txd_clk", NULL,
+			CLK_IS_ROOT, 270000000),
+	FRATE(phyclk_hdmi_phy_tmds_clko, "phyclk_hdmi_phy_tmds_clko", NULL,
+			CLK_IS_ROOT, 250000000),
+	FRATE(PHYCLK_HDMI_PHY_PIXEL_CLKO, "phyclk_hdmi_phy_pixel_clko", NULL,
+			CLK_IS_ROOT, 1660000000),
+	FRATE(PHYCLK_HDMI_LINK_O_TMDS_CLKHI, "phyclk_hdmi_link_o_tmds_clkhi",
+			NULL, CLK_IS_ROOT, 125000000),
+	FRATE(PHYCLK_MIPI_DPHY_4L_M_TXBYTECLKHS,
+			"phyclk_mipi_dphy_4l_m_txbyteclkhs" , NULL,
+			CLK_IS_ROOT, 187500000),
+	FRATE(PHYCLK_DPTX_PHY_O_REF_CLK_24M, "phyclk_dptx_phy_o_ref_clk_24m",
+			NULL, CLK_IS_ROOT, 24000000),
+	FRATE(PHYCLK_DPTX_PHY_CLK_DIV2, "phyclk_dptx_phy_clk_div2", NULL,
+			CLK_IS_ROOT, 135000000),
+	FRATE(PHYCLK_MIPI_DPHY_4L_M_RXCLKESC0,
+			"phyclk_mipi_dphy_4l_m_rxclkesc0", NULL,
+			CLK_IS_ROOT, 20000000),
+	FRATE(PHYCLK_USBHOST20_PHY_PHYCLOCK, "phyclk_usbhost20_phy_phyclock",
+			NULL, CLK_IS_ROOT, 60000000),
+	FRATE(PHYCLK_USBHOST20_PHY_FREECLK, "phyclk_usbhost20_phy_freeclk",
+			NULL, CLK_IS_ROOT, 60000000),
+	FRATE(PHYCLK_USBHOST20_PHY_CLK48MOHCI,
+			"phyclk_usbhost20_phy_clk48mohci",
+			NULL, CLK_IS_ROOT, 48000000),
+	FRATE(PHYCLK_USBDRD30_UDRD30_PIPE_PCLK,
+			"phyclk_usbdrd30_udrd30_pipe_pclk", NULL,
+			CLK_IS_ROOT, 125000000),
+	FRATE(PHYCLK_USBDRD30_UDRD30_PHYCLOCK,
+			"phyclk_usbdrd30_udrd30_phyclock", NULL,
+			CLK_IS_ROOT, 60000000),
+};
+
+PNAME(mout_memtop_pll_user_p) = {"fin_pll", "dout_mem_pll"};
+PNAME(mout_bustop_pll_user_p) = {"fin_pll", "dout_bus_pll"};
+PNAME(mout_mediatop_pll_user_p) = {"fin_pll", "dout_media_pll"};
+PNAME(mout_audtop_pll_user_p) = {"fin_pll", "mout_aud_pll"};
+PNAME(mout_aud_pll_p) = {"fin_pll", "fout_aud_pll"};
+PNAME(mout_disp_pll_p) = {"fin_pll", "fout_disp_pll"};
+PNAME(mout_mfc_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_mfc_333_p) = {"mout_mediatop_pll_user", "mout_mfc_bustop_333"};
+PNAME(mout_g2d_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_g2d_333_p) = {"mout_mediatop_pll_user", "mout_g2d_bustop_333"};
+PNAME(mout_gscl_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_gscl_333_p) = {"mout_mediatop_pll_user",
+			"mout_gscl_bustop_333"};
+PNAME(mout_m2m_mediatop_400_p) = {"mout_mediatop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_gscl_400_p) = {"mout_bustop_pll_user",
+			"mout_m2m_mediatop_400"};
+PNAME(mout_gscl_bustop_fimc_p) = {"mout_bustop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_gscl_fimc_p) = {"mout_mediatop_pll_user",
+			"mout_gscl_bustop_fimc"};
+PNAME(mout_isp1_media_266_p) = {"mout_mediatop_pll_user",
+			"mout_memtop_pll_user"};
+PNAME(mout_aclk_isp1_266_p) = {"mout_bustop_pll_user", "mout_isp1_media_266"};
+PNAME(mout_isp1_media_400_p) = {"mout_mediatop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_isp1_400_p) = {"mout_bustop_pll_user", "mout_isp1_media_400"};
+PNAME(mout_sclk_isp_spi_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_isp_uart_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_isp_sensor_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_disp_disp_333_p) = {"mout_disp_pll", "mout_bustop_pll_user"};
+PNAME(mout_aclk_disp_333_p) = {"mout_mediatop_pll_user", "mout_disp_disp_333"};
+PNAME(mout_disp_disp_222_p) = {"mout_disp_pll", "mout_bustop_pll_user"};
+PNAME(mout_aclk_disp_222_p) = {"mout_mediatop_pll_user", "mout_disp_disp_222"};
+PNAME(mout_disp_media_pixel_p) = {"mout_mediatop_pll_user",
+			"mout_bustop_pll_user"};
+PNAME(mout_sclk_disp_pixel_p) = {"mout_disp_pll", "mout_disp_media_pixel"};
+PNAME(mout_bus_bustop_400_p) = {"mout_bustop_pll_user", "mout_memtop_pll_user"};
+PNAME(mout_bus_bustop_100_p) = {"mout_bustop_pll_user", "mout_memtop_pll_user"};
+PNAME(mout_sclk_peri_spi_clk_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_peri_uart_uclk_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_fsys_usb_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_fsys_mmc_sdclkin_a_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_fsys_mmc0_sdclkin_b_p) = {"mout_sclk_fsys_mmc0_sdclkin_a",
+			"mout_mediatop_pll_user"};
+PNAME(mout_sclk_fsys_mmc1_sdclkin_b_p) = {"mout_sclk_fsys_mmc1_sdclkin_a",
+			"mout_mediatop_pll_user"};
+PNAME(mout_sclk_fsys_mmc2_sdclkin_b_p) = {"mout_sclk_fsys_mmc2_sdclkin_a",
+			"mout_mediatop_pll_user"};
+
+struct samsung_mux_clock top_mux_clks[] __initdata = {
+	MUX(TOP_MOUT_MEDIATOP_PLL_USER, "mout_mediatop_pll_user",
+			mout_mediatop_pll_user_p,
+			MUX_SEL_TOP_PLL0, 0, 1),
+	MUX(TOP_MOUT_MEMTOP_PLL_USER, "mout_memtop_pll_user",
+			mout_memtop_pll_user_p,
+			MUX_SEL_TOP_PLL0, 4, 1),
+	MUX(TOP_MOUT_BUSTOP_PLL_USER, "mout_bustop_pll_user",
+			mout_bustop_pll_user_p,
+			MUX_SEL_TOP_PLL0, 8, 1),
+	MUX(TOP_MOUT_DISP_PLL, "mout_disp_pll", mout_disp_pll_p,
+			MUX_SEL_TOP_PLL0, 12, 1),
+	MUX(TOP_MOUT_AUD_PLL, "mout_aud_pll", mout_aud_pll_p,
+			MUX_SEL_TOP_PLL0, 16, 1),
+	MUX(TOP_MOUT_AUDTOP_PLL_USER, "mout_audtop_pll_user",
+			mout_audtop_pll_user_p,
+			MUX_SEL_TOP_PLL0, 24, 1),
+
+	MUX(TOP_MOUT_DISP_DISP_333, "mout_disp_disp_333", mout_disp_disp_333_p,
+			MUX_SEL_TOP_DISP0, 0, 1),
+	MUX(TOP_MOUT_ACLK_DISP_333, "mout_aclk_disp_333", mout_aclk_disp_333_p,
+			MUX_SEL_TOP_DISP0, 8, 1),
+	MUX(TOP_MOUT_DISP_DISP_222, "mout_disp_disp_222", mout_disp_disp_222_p,
+			MUX_SEL_TOP_DISP0, 12, 1),
+	MUX(TOP_MOUT_ACLK_DISP_222, "mout_aclk_disp_222", mout_aclk_disp_222_p,
+			MUX_SEL_TOP_DISP0, 20, 1),
+
+	MUX(TOP_MOUT_FIMD1, "mout_sclk_disp_pixel", mout_sclk_disp_pixel_p,
+			MUX_SEL_TOP_DISP1, 0, 1),
+	MUX(TOP_MOUT_DISP_MEDIA_PIXEL, "mout_disp_media_pixel",
+			mout_disp_media_pixel_p,
+			MUX_SEL_TOP_DISP1, 8, 1),
+
+	MUX(TOP_MOUT_SCLK_PERI_SPI2_CLK, "mout_sclk_peri_spi2_clk",
+			mout_sclk_peri_spi_clk_p,
+			MUX_SEL_TOP_PERI1, 0, 1),
+	MUX(TOP_MOUT_SCLK_PERI_SPI1_CLK, "mout_sclk_peri_spi1_clk",
+			mout_sclk_peri_spi_clk_p,
+			MUX_SEL_TOP_PERI1, 4, 1),
+	MUX(TOP_MOUT_SCLK_PERI_SPI0_CLK, "mout_sclk_peri_spi0_clk",
+			mout_sclk_peri_spi_clk_p,
+			MUX_SEL_TOP_PERI1, 8, 1),
+	MUX(TOP_MOUT_SCLK_PERI_UART1_UCLK, "mout_sclk_peri_uart1_uclk",
+			mout_sclk_peri_uart_uclk_p,
+			MUX_SEL_TOP_PERI1, 12, 1),
+	MUX(TOP_MOUT_SCLK_PERI_UART2_UCLK, "mout_sclk_peri_uart2_uclk",
+			mout_sclk_peri_uart_uclk_p,
+			MUX_SEL_TOP_PERI1, 16, 1),
+	MUX(TOP_MOUT_SCLK_PERI_UART0_UCLK, "mout_sclk_peri_uart0_uclk",
+			mout_sclk_peri_uart_uclk_p,
+			MUX_SEL_TOP_PERI1, 20, 1),
+
+
+	MUX(TOP_MOUT_BUS1_BUSTOP_400, "mout_bus1_bustop_400",
+			mout_bus_bustop_400_p,
+			MUX_SEL_TOP_BUS, 0, 1),
+	MUX(TOP_MOUT_BUS1_BUSTOP_100, "mout_bus1_bustop_100",
+			mout_bus_bustop_100_p,
+			MUX_SEL_TOP_BUS, 4, 1),
+	MUX(TOP_MOUT_BUS2_BUSTOP_100, "mout_bus2_bustop_100",
+			mout_bus_bustop_100_p,
+			MUX_SEL_TOP_BUS, 8, 1),
+	MUX(TOP_MOUT_BUS2_BUSTOP_400, "mout_bus2_bustop_400",
+			mout_bus_bustop_400_p,
+			MUX_SEL_TOP_BUS, 12, 1),
+	MUX(TOP_MOUT_BUS3_BUSTOP_400, "mout_bus3_bustop_400",
+			mout_bus_bustop_400_p,
+			MUX_SEL_TOP_BUS, 16, 1),
+	MUX(TOP_MOUT_BUS3_BUSTOP_100, "mout_bus3_bustop_100",
+			mout_bus_bustop_100_p,
+			MUX_SEL_TOP_BUS, 20, 1),
+	MUX(TOP_MOUT_BUS4_BUSTOP_400, "mout_bus4_bustop_400",
+			mout_bus_bustop_400_p,
+			MUX_SEL_TOP_BUS, 24, 1),
+	MUX(TOP_MOUT_BUS4_BUSTOP_100, "mout_bus4_bustop_100",
+			mout_bus_bustop_100_p,
+			MUX_SEL_TOP_BUS, 28, 1),
+
+	MUX(TOP_MOUT_SCLK_FSYS_USB, "mout_sclk_fsys_usb",
+			mout_sclk_fsys_usb_p,
+			MUX_SEL_TOP_FSYS, 0, 1),
+	MUX(TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A, "mout_sclk_fsys_mmc2_sdclkin_a",
+			mout_sclk_fsys_mmc_sdclkin_a_p,
+			MUX_SEL_TOP_FSYS, 4, 1),
+	MUX(TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B, "mout_sclk_fsys_mmc2_sdclkin_b",
+			mout_sclk_fsys_mmc2_sdclkin_b_p,
+			MUX_SEL_TOP_FSYS, 8, 1),
+	MUX(TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A, "mout_sclk_fsys_mmc1_sdclkin_a",
+			mout_sclk_fsys_mmc_sdclkin_a_p,
+			MUX_SEL_TOP_FSYS, 12, 1),
+	MUX(TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B, "mout_sclk_fsys_mmc1_sdclkin_b",
+			mout_sclk_fsys_mmc1_sdclkin_b_p,
+			MUX_SEL_TOP_FSYS, 16, 1),
+	MUX(TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A, "mout_sclk_fsys_mmc0_sdclkin_a",
+			mout_sclk_fsys_mmc_sdclkin_a_p,
+			MUX_SEL_TOP_FSYS, 20, 1),
+	MUX(TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B, "mout_sclk_fsys_mmc0_sdclkin_b",
+			mout_sclk_fsys_mmc0_sdclkin_b_p,
+			MUX_SEL_TOP_FSYS, 24, 1),
+
+	MUX(TOP_MOUT_ISP1_MEDIA_400, "mout_isp1_media_400",
+			mout_isp1_media_400_p,
+			MUX_SEL_TOP_ISP10, 4, 1),
+	MUX(TOP_MOUT_ACLK_ISP1_400, "mout_aclk_isp1_400", mout_aclk_isp1_400_p,
+			MUX_SEL_TOP_ISP10, 8 , 1),
+	MUX(TOP_MOUT_ISP1_MEDIA_266, "mout_isp1_media_266",
+			mout_isp1_media_266_p,
+			MUX_SEL_TOP_ISP10, 16, 1),
+	MUX(TOP_MOUT_ACLK_ISP1_266, "mout_aclk_isp1_266", mout_aclk_isp1_266_p,
+			MUX_SEL_TOP_ISP10, 20, 1),
+
+	MUX(TOP_MOUT_SCLK_ISP1_SPI0, "mout_sclk_isp1_spi0", mout_sclk_isp_spi_p,
+			MUX_SEL_TOP_ISP11, 4, 1),
+	MUX(TOP_MOUT_SCLK_ISP1_SPI1, "mout_sclk_isp1_spi1", mout_sclk_isp_spi_p,
+			MUX_SEL_TOP_ISP11, 8, 1),
+	MUX(TOP_MOUT_SCLK_ISP1_UART, "mout_sclk_isp1_uart",
+			mout_sclk_isp_uart_p,
+			MUX_SEL_TOP_ISP11, 12, 1),
+	MUX(TOP_MOUT_SCLK_ISP1_SENSOR0, "mout_sclk_isp1_sensor0",
+			mout_sclk_isp_sensor_p,
+			MUX_SEL_TOP_ISP11, 16, 1),
+	MUX(TOP_MOUT_SCLK_ISP1_SENSOR1, "mout_sclk_isp1_sensor1",
+			mout_sclk_isp_sensor_p,
+			MUX_SEL_TOP_ISP11, 20, 1),
+	MUX(TOP_MOUT_SCLK_ISP1_SENSOR2, "mout_sclk_isp1_sensor2",
+			mout_sclk_isp_sensor_p,
+			MUX_SEL_TOP_ISP11, 24, 1),
+
+	MUX(TOP_MOUT_MFC_BUSTOP_333, "mout_mfc_bustop_333",
+			mout_mfc_bustop_333_p,
+			MUX_SEL_TOP_MFC, 4, 1),
+	MUX(TOP_MOUT_ACLK_MFC_333, "mout_aclk_mfc_333", mout_aclk_mfc_333_p,
+			MUX_SEL_TOP_MFC, 8, 1),
+
+	MUX(TOP_MOUT_G2D_BUSTOP_333, "mout_g2d_bustop_333",
+			mout_g2d_bustop_333_p,
+			MUX_SEL_TOP_G2D, 4, 1),
+	MUX(TOP_MOUT_ACLK_G2D_333, "mout_aclk_g2d_333", mout_aclk_g2d_333_p,
+			MUX_SEL_TOP_G2D, 8, 1),
+
+	MUX(TOP_MOUT_M2M_MEDIATOP_400, "mout_m2m_mediatop_400",
+			mout_m2m_mediatop_400_p,
+			MUX_SEL_TOP_GSCL, 0, 1),
+	MUX(TOP_MOUT_ACLK_GSCL_400, "mout_aclk_gscl_400",
+			mout_aclk_gscl_400_p,
+			MUX_SEL_TOP_GSCL, 4, 1),
+	MUX(TOP_MOUT_GSCL_BUSTOP_333, "mout_gscl_bustop_333",
+			mout_gscl_bustop_333_p,
+			MUX_SEL_TOP_GSCL, 8, 1),
+	MUX(TOP_MOUT_ACLK_GSCL_333, "mout_aclk_gscl_333",
+			mout_aclk_gscl_333_p,
+			MUX_SEL_TOP_GSCL, 12, 1),
+	MUX(TOP_MOUT_GSCL_BUSTOP_FIMC, "mout_gscl_bustop_fimc",
+			mout_gscl_bustop_fimc_p,
+			MUX_SEL_TOP_GSCL, 16, 1),
+	MUX(TOP_MOUT_ACLK_GSCL_FIMC, "mout_aclk_gscl_fimc",
+			mout_aclk_gscl_fimc_p,
+			MUX_SEL_TOP_GSCL, 20, 1),
+};
+
+struct samsung_div_clock top_div_clks[] __initdata = {
+	DIV(TOP_DOUT_ACLK_G2D_333, "dout_aclk_g2d_333", "mout_aclk_g2d_333",
+			DIV_TOP_G2D_MFC, 0, 3),
+	DIV(TOP_DOUT_ACLK_MFC_333, "dout_aclk_mfc_333", "mout_aclk_mfc_333",
+			DIV_TOP_G2D_MFC, 4, 3),
+
+	DIV(TOP_DOUT_ACLK_GSCL_333, "dout_aclk_gscl_333", "mout_aclk_gscl_333",
+			DIV_TOP_GSCL_ISP0, 0, 3),
+	DIV(TOP_DOUT_ACLK_GSCL_400, "dout_aclk_gscl_400", "mout_aclk_gscl_400",
+			DIV_TOP_GSCL_ISP0, 4, 3),
+	DIV(TOP_DOUT_ACLK_GSCL_FIMC, "dout_aclk_gscl_fimc",
+			"mout_aclk_gscl_fimc", DIV_TOP_GSCL_ISP0, 8, 3),
+	DIV(TOP_DOUT_SCLK_ISP1_SENSOR0_A, "dout_sclk_isp1_sensor0_a",
+			"mout_aclk_gscl_fimc", DIV_TOP_GSCL_ISP0, 16, 4),
+	DIV(TOP_DOUT_SCLK_ISP1_SENSOR1_A, "dout_sclk_isp1_sensor1_a",
+			"mout_aclk_gscl_400", DIV_TOP_GSCL_ISP0, 20, 4),
+	DIV(TOP_DOUT_SCLK_ISP1_SENSOR2_A, "dout_sclk_isp1_sensor2_a",
+			"mout_aclk_gscl_fimc", DIV_TOP_GSCL_ISP0, 24, 4),
+
+	DIV(TOP_DOUT_ACLK_ISP1_266, "dout_aclk_isp1_266", "mout_aclk_isp1_266",
+			DIV_TOP_ISP10, 0, 3),
+	DIV(TOP_DOUT_ACLK_ISP1_400, "dout_aclk_isp1_400", "mout_aclk_isp1_400",
+			DIV_TOP_ISP10, 4, 3),
+	DIV(TOP_DOUT_SCLK_ISP1_SPI0_A, "dout_sclk_isp1_spi0_a",
+			"mout_sclk_isp1_spi0", DIV_TOP_ISP10, 12, 4),
+	DIV(TOP_DOUT_SCLK_ISP1_SPI0_B, "dout_sclk_isp1_spi0_b",
+			"dout_sclk_isp1_spi0_a", DIV_TOP_ISP10, 16, 8),
+
+	DIV(TOP_DOUT_SCLK_ISP1_SPI1_A, "dout_sclk_isp1_spi1_a",
+			"mout_sclk_isp1_spi1", DIV_TOP_ISP11, 0, 4),
+	DIV(TOP_DOUT_SCLK_ISP1_SPI1_B, "dout_sclk_isp1_spi1_b",
+			"dout_sclk_isp1_spi1_a", DIV_TOP_ISP11, 4, 8),
+	DIV(TOP_DOUT_SCLK_ISP1_UART, "dout_sclk_isp1_uart",
+			"mout_sclk_isp1_uart", DIV_TOP_ISP11, 12, 4),
+	DIV(TOP_DOUT_SCLK_ISP1_SENSOR0_B, "dout_sclk_isp1_sensor0_b",
+			"dout_sclk_isp1_sensor0_a", DIV_TOP_ISP11, 16, 4),
+	DIV(TOP_DOUT_SCLK_ISP1_SENSOR1_B, "dout_sclk_isp1_sensor1_b",
+			"dout_sclk_isp1_sensor1_a", DIV_TOP_ISP11, 20, 4),
+	DIV(TOP_DOUT_SCLK_ISP1_SENSOR2_B, "dout_sclk_isp1_sensor2_b",
+			"dout_sclk_isp1_sensor2_a", DIV_TOP_ISP11, 24, 4),
+
+	DIV(TOP_DOUTTOP__SCLK_HPM_TARGETCLK, "dout_sclk_hpm_targetclk",
+			"mout_bustop_pll_user", DIV_TOP_HPM, 0, 3),
+
+	DIV(TOP_DOUT_ACLK_DISP_333, "dout_aclk_disp_333", "mout_aclk_disp_333",
+			DIV_TOP_DISP, 0, 3),
+	DIV(TOP_DOUT_ACLK_DISP_222, "dout_aclk_disp_222", "mout_aclk_disp_222",
+			DIV_TOP_DISP, 4, 3),
+	DIV(TOP_DOUT_SCLK_DISP_PIXEL, "dout_sclk_disp_pixel",
+			"mout_sclk_disp_pixel",	DIV_TOP_DISP, 8, 3),
+
+	DIV(TOP_DOUT_ACLK_BUS1_400, "dout_aclk_bus1_400",
+			"mout_bus1_bustop_400",	DIV_TOP_BUS, 0, 3),
+	DIV(TOP_DOUT_ACLK_BUS1_100, "dout_aclk_bus1_100",
+			"mout_bus1_bustop_100",	DIV_TOP_BUS, 4, 4),
+	DIV(TOP_DOUT_ACLK_BUS2_400, "dout_aclk_bus2_400",
+			"mout_bus2_bustop_400",	DIV_TOP_BUS, 8, 3),
+	DIV(TOP_DOUT_ACLK_BUS2_100, "dout_aclk_bus2_100",
+			"mout_bus2_bustop_100",	DIV_TOP_BUS, 12, 4),
+	DIV(TOP_DOUT_ACLK_BUS3_400, "dout_aclk_bus3_400",
+			"mout_bus3_bustop_400", DIV_TOP_BUS, 16, 3),
+	DIV(TOP_DOUT_ACLK_BUS3_100, "dout_aclk_bus3_100",
+			"mout_bus3_bustop_100",	DIV_TOP_BUS, 20, 4),
+	DIV(TOP_DOUT_ACLK_BUS4_400, "dout_aclk_bus4_400",
+			"mout_bus4_bustop_400",	DIV_TOP_BUS, 24, 3),
+	DIV(TOP_DOUT_ACLK_BUS4_100, "dout_aclk_bus4_100",
+			"mout_bus4_bustop_100",	DIV_TOP_BUS, 28, 4),
+
+	DIV(TOP_DOUT_SCLK_PERI_SPI0_A, "dout_sclk_peri_spi0_a",
+			"mout_sclk_peri_spi0_clk", DIV_TOP_PERI0, 4, 4),
+	DIV(TOP_DOUT_SCLK_PERI_SPI0_B, "dout_sclk_peri_spi0_b",
+			"dout_sclk_peri_spi0_a", DIV_TOP_PERI0, 8, 8),
+	DIV(TOP_DOUT_SCLK_PERI_SPI1_A, "dout_sclk_peri_spi1_a",
+			"mout_sclk_peri_spi1_clk", DIV_TOP_PERI0, 16, 4),
+	DIV(TOP_DOUT_SCLK_PERI_SPI1_B, "dout_sclk_peri_spi1_b",
+			"dout_sclk_peri_spi1_a", DIV_TOP_PERI0, 20, 8),
+
+	DIV(TOP_DOUT_SCLK_PERI_SPI2_A, "dout_sclk_peri_spi2_a",
+			"mout_sclk_peri_spi2_clk", DIV_TOP_PERI1, 0, 4),
+	DIV(TOP_DOUT_SCLK_PERI_SPI2_B, "dout_sclk_peri_spi2_b",
+			"dout_sclk_peri_spi2_a", DIV_TOP_PERI1, 4, 8),
+	DIV(TOP_DOUT_SCLK_PERI_UART1, "dout_sclk_peri_uart1",
+			"mout_sclk_peri_uart1_uclk", DIV_TOP_PERI1, 16, 4),
+	DIV(TOP_DOUT_SCLK_PERI_UART2, "dout_sclk_peri_uart2",
+			"mout_sclk_peri_uart2_uclk", DIV_TOP_PERI1, 20, 4),
+	DIV(TOP_DOUT_SCLK_PERI_UART0, "dout_sclk_peri_uart0",
+			"mout_sclk_peri_uart0_uclk", DIV_TOP_PERI1, 24, 4),
+
+	DIV(TOP_DOUT_ACLK_PERI_66, "dout_aclk_peri_66", "mout_bustop_pll_user",
+			DIV_TOP_PERI2, 20, 4),
+	DIV(TOP_DOUT_ACLK_PERI_AUD, "dout_aclk_peri_aud",
+			"mout_audtop_pll_user", DIV_TOP_PERI2, 24, 3),
+
+	DIV(TOP_DOUT_ACLK_FSYS_200, "dout_aclk_fsys_200",
+			"mout_bustop_pll_user", DIV_TOP_FSYS0, 0, 3),
+	DIV(TOP_DOUT_SCLK_FSYS_USBDRD30_SUSPEND_CLK,
+			"dout_sclk_fsys_usbdrd30_suspend_clk",
+			"mout_sclk_fsys_usb", DIV_TOP_FSYS0, 4, 4),
+	DIV(TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_A, "dout_sclk_fsys_mmc0_sdclkin_a",
+			"mout_sclk_fsys_mmc0_sdclkin_b",
+			DIV_TOP_FSYS0, 12, 4),
+	DIV(TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_B, "dout_sclk_fsys_mmc0_sdclkin_b",
+			"dout_sclk_fsys_mmc0_sdclkin_a",
+			DIV_TOP_FSYS0, 16, 8),
+
+
+	DIV(TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_A, "dout_sclk_fsys_mmc1_sdclkin_a",
+			"mout_sclk_fsys_mmc1_sdclkin_b",
+			DIV_TOP_FSYS1, 0, 4),
+	DIV(TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_B, "dout_sclk_fsys_mmc1_sdclkin_b",
+			"dout_sclk_fsys_mmc1_sdclkin_a",
+			DIV_TOP_FSYS1, 4, 8),
+	DIV(TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_A, "dout_sclk_fsys_mmc2_sdclkin_a",
+			"mout_sclk_fsys_mmc2_sdclkin_b",
+			DIV_TOP_FSYS1, 12, 4),
+	DIV(TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_B, "dout_sclk_fsys_mmc2_sdclkin_b",
+			"dout_sclk_fsys_mmc2_sdclkin_a",
+			DIV_TOP_FSYS1, 16, 8),
+
+};
+
+struct samsung_gate_clock top_gate_clks[] __initdata = {
+	GATE(TOP_SCLK_MMC0, "sclk_fsys_mmc0_sdclkin",
+			"dout_sclk_fsys_mmc0_sdclkin_b",
+			EN_SCLK_TOP, 7, CLK_SET_RATE_PARENT, 0),
+	GATE(TOP_SCLK_MMC1, "sclk_fsys_mmc1_sdclkin",
+			"dout_sclk_fsys_mmc1_sdclkin_b",
+			EN_SCLK_TOP, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(TOP_SCLK_MMC2, "sclk_fsys_mmc2_sdclkin",
+			"dout_sclk_fsys_mmc2_sdclkin_b",
+			EN_SCLK_TOP, 9, CLK_SET_RATE_PARENT, 0),
+	GATE(TOP_SCLK_FIMD1, "sclk_disp_pixel", "dout_sclk_disp_pixel",
+			EN_ACLK_TOP, 10, CLK_IGNORE_UNUSED |
+			CLK_SET_RATE_PARENT, 0),
+};
+
+static struct samsung_pll_clock top_pll_clks[] __initdata = {
+	PLL(pll_2550xx, TOP_FOUT_DISP_PLL, "fout_disp_pll", "fin_pll",
+		DISP_PLL_LOCK, DISP_PLL_CON0,
+		pll2550_24mhz_tbl),
+	PLL(pll_2650xx, TOP_FOUT_AUD_PLL, "fout_aud_pll", "fin_pll",
+		AUD_PLL_LOCK, AUD_PLL_CON0,
+		pll2650_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_top_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.pll_clks = top_pll_clks;
+	cmu.nr_pll_clks =  ARRAY_SIZE(top_pll_clks);
+	cmu.mux_clks = top_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(top_mux_clks);
+	cmu.div_clks = top_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(top_div_clks);
+	cmu.gate_clks = top_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(top_gate_clks);
+	cmu.fixed_clks = fixed_rate_clks;
+	cmu.nr_fixed_clks = ARRAY_SIZE(fixed_rate_clks);
+	cmu.nr_clk_ids = TOP_NR_CLK;
+	cmu.clk_regs = top_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top",
+		exynos5260_clk_top_init);

drivers/clk/samsung/clk-exynos5260.h

@@ -0,0 +1,459 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Rahul Sharma <rahul.sharma@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5260 SoC.
+ */
+
+#ifndef __CLK_EXYNOS5260_H
+#define __CLK_EXYNOS5260_H
+
+/*
+*Registers for CMU_AUD
+*/
+#define MUX_SEL_AUD				0x0200
+#define MUX_ENABLE_AUD				0x0300
+#define MUX_STAT_AUD				0x0400
+#define MUX_IGNORE_AUD				0x0500
+#define DIV_AUD0				0x0600
+#define DIV_AUD1				0x0604
+#define DIV_STAT_AUD0				0x0700
+#define DIV_STAT_AUD1				0x0704
+#define EN_ACLK_AUD				0x0800
+#define EN_PCLK_AUD				0x0900
+#define EN_SCLK_AUD				0x0a00
+#define EN_IP_AUD				0x0b00
+
+/*
+*Registers for CMU_DISP
+*/
+#define MUX_SEL_DISP0				0x0200
+#define MUX_SEL_DISP1				0x0204
+#define MUX_SEL_DISP2				0x0208
+#define MUX_SEL_DISP3				0x020C
+#define MUX_SEL_DISP4				0x0210
+#define MUX_ENABLE_DISP0			0x0300
+#define MUX_ENABLE_DISP1			0x0304
+#define MUX_ENABLE_DISP2			0x0308
+#define MUX_ENABLE_DISP3			0x030c
+#define MUX_ENABLE_DISP4			0x0310
+#define MUX_STAT_DISP0				0x0400
+#define MUX_STAT_DISP1				0x0404
+#define MUX_STAT_DISP2				0x0408
+#define MUX_STAT_DISP3				0x040c
+#define MUX_STAT_DISP4				0x0410
+#define MUX_IGNORE_DISP0			0x0500
+#define MUX_IGNORE_DISP1			0x0504
+#define MUX_IGNORE_DISP2			0x0508
+#define MUX_IGNORE_DISP3			0x050c
+#define MUX_IGNORE_DISP4			0x0510
+#define DIV_DISP				0x0600
+#define DIV_STAT_DISP				0x0700
+#define EN_ACLK_DISP				0x0800
+#define EN_PCLK_DISP				0x0900
+#define EN_SCLK_DISP0				0x0a00
+#define EN_SCLK_DISP1				0x0a04
+#define EN_IP_DISP				0x0b00
+#define EN_IP_DISP_BUS				0x0b04
+
+
+/*
+*Registers for CMU_EGL
+*/
+#define EGL_PLL_LOCK				0x0000
+#define EGL_DPLL_LOCK				0x0004
+#define EGL_PLL_CON0				0x0100
+#define EGL_PLL_CON1				0x0104
+#define EGL_PLL_FREQ_DET			0x010c
+#define EGL_DPLL_CON0				0x0110
+#define EGL_DPLL_CON1				0x0114
+#define EGL_DPLL_FREQ_DET			0x011c
+#define MUX_SEL_EGL				0x0200
+#define MUX_ENABLE_EGL				0x0300
+#define MUX_STAT_EGL				0x0400
+#define DIV_EGL					0x0600
+#define DIV_EGL_PLL_FDET			0x0604
+#define DIV_STAT_EGL				0x0700
+#define DIV_STAT_EGL_PLL_FDET			0x0704
+#define EN_ACLK_EGL				0x0800
+#define EN_PCLK_EGL				0x0900
+#define EN_SCLK_EGL				0x0a00
+#define EN_IP_EGL				0x0b00
+#define CLKOUT_CMU_EGL				0x0c00
+#define CLKOUT_CMU_EGL_DIV_STAT			0x0c04
+#define ARMCLK_STOPCTRL				0x1000
+#define EAGLE_EMA_CTRL				0x1008
+#define EAGLE_EMA_STATUS			0x100c
+#define PWR_CTRL				0x1020
+#define PWR_CTRL2				0x1024
+#define CLKSTOP_CTRL				0x1028
+#define INTR_SPREAD_EN				0x1080
+#define INTR_SPREAD_USE_STANDBYWFI		0x1084
+#define INTR_SPREAD_BLOCKING_DURATION		0x1088
+#define CMU_EGL_SPARE0				0x2000
+#define CMU_EGL_SPARE1				0x2004
+#define CMU_EGL_SPARE2				0x2008
+#define CMU_EGL_SPARE3				0x200c
+#define CMU_EGL_SPARE4				0x2010
+
+/*
+*Registers for CMU_FSYS
+*/
+
+#define MUX_SEL_FSYS0				0x0200
+#define MUX_SEL_FSYS1				0x0204
+#define MUX_ENABLE_FSYS0			0x0300
+#define MUX_ENABLE_FSYS1			0x0304
+#define MUX_STAT_FSYS0				0x0400
+#define MUX_STAT_FSYS1				0x0404
+#define MUX_IGNORE_FSYS0			0x0500
+#define MUX_IGNORE_FSYS1			0x0504
+#define EN_ACLK_FSYS				0x0800
+#define EN_ACLK_FSYS_SECURE_RTIC		0x0804
+#define EN_ACLK_FSYS_SECURE_SMMU_RTIC		0x0808
+#define EN_PCLK_FSYS				0x0900
+#define EN_SCLK_FSYS				0x0a00
+#define EN_IP_FSYS				0x0b00
+#define EN_IP_FSYS_SECURE_RTIC			0x0b04
+#define EN_IP_FSYS_SECURE_SMMU_RTIC		0x0b08
+
+/*
+*Registers for CMU_G2D
+*/
+
+#define MUX_SEL_G2D				0x0200
+#define MUX_ENABLE_G2D				0x0300
+#define MUX_STAT_G2D				0x0400
+#define DIV_G2D					0x0600
+#define DIV_STAT_G2D				0x0700
+#define EN_ACLK_G2D				0x0800
+#define EN_ACLK_G2D_SECURE_SSS			0x0804
+#define EN_ACLK_G2D_SECURE_SLIM_SSS		0x0808
+#define EN_ACLK_G2D_SECURE_SMMU_SLIM_SSS	0x080c
+#define EN_ACLK_G2D_SECURE_SMMU_SSS		0x0810
+#define EN_ACLK_G2D_SECURE_SMMU_MDMA		0x0814
+#define EN_ACLK_G2D_SECURE_SMMU_G2D		0x0818
+#define EN_PCLK_G2D				0x0900
+#define EN_PCLK_G2D_SECURE_SMMU_SLIM_SSS	0x0904
+#define EN_PCLK_G2D_SECURE_SMMU_SSS		0x0908
+#define EN_PCLK_G2D_SECURE_SMMU_MDMA		0x090c
+#define EN_PCLK_G2D_SECURE_SMMU_G2D		0x0910
+#define EN_IP_G2D				0x0b00
+#define EN_IP_G2D_SECURE_SSS			0x0b04
+#define EN_IP_G2D_SECURE_SLIM_SSS		0x0b08
+#define EN_IP_G2D_SECURE_SMMU_SLIM_SSS		0x0b0c
+#define EN_IP_G2D_SECURE_SMMU_SSS		0x0b10
+#define EN_IP_G2D_SECURE_SMMU_MDMA		0x0b14
+#define EN_IP_G2D_SECURE_SMMU_G2D		0x0b18
+
+/*
+*Registers for CMU_G3D
+*/
+
+#define G3D_PLL_LOCK				0x0000
+#define G3D_PLL_CON0				0x0100
+#define G3D_PLL_CON1				0x0104
+#define G3D_PLL_FDET				0x010c
+#define MUX_SEL_G3D				0x0200
+#define MUX_EN_G3D				0x0300
+#define MUX_STAT_G3D				0x0400
+#define MUX_IGNORE_G3D				0x0500
+#define DIV_G3D					0x0600
+#define DIV_G3D_PLL_FDET			0x0604
+#define DIV_STAT_G3D				0x0700
+#define DIV_STAT_G3D_PLL_FDET			0x0704
+#define EN_ACLK_G3D				0x0800
+#define EN_PCLK_G3D				0x0900
+#define EN_SCLK_G3D				0x0a00
+#define EN_IP_G3D				0x0b00
+#define CLKOUT_CMU_G3D				0x0c00
+#define CLKOUT_CMU_G3D_DIV_STAT			0x0c04
+#define G3DCLK_STOPCTRL				0x1000
+#define G3D_EMA_CTRL				0x1008
+#define G3D_EMA_STATUS				0x100c
+
+/*
+*Registers for CMU_GSCL
+*/
+
+#define MUX_SEL_GSCL				0x0200
+#define MUX_EN_GSCL				0x0300
+#define MUX_STAT_GSCL				0x0400
+#define MUX_IGNORE_GSCL				0x0500
+#define DIV_GSCL				0x0600
+#define DIV_STAT_GSCL				0x0700
+#define EN_ACLK_GSCL				0x0800
+#define EN_ACLK_GSCL_FIMC			0x0804
+#define EN_ACLK_GSCL_SECURE_SMMU_GSCL0		0x0808
+#define EN_ACLK_GSCL_SECURE_SMMU_GSCL1		0x080c
+#define EN_ACLK_GSCL_SECURE_SMMU_MSCL0		0x0810
+#define EN_ACLK_GSCL_SECURE_SMMU_MSCL1		0x0814
+#define EN_PCLK_GSCL				0x0900
+#define EN_PCLK_GSCL_FIMC			0x0904
+#define EN_PCLK_GSCL_SECURE_SMMU_GSCL0		0x0908
+#define EN_PCLK_GSCL_SECURE_SMMU_GSCL1		0x090c
+#define EN_PCLK_GSCL_SECURE_SMMU_MSCL0		0x0910
+#define EN_PCLK_GSCL_SECURE_SMMU_MSCL1		0x0914
+#define EN_SCLK_GSCL				0x0a00
+#define EN_SCLK_GSCL_FIMC			0x0a04
+#define EN_IP_GSCL				0x0b00
+#define EN_IP_GSCL_FIMC				0x0b04
+#define EN_IP_GSCL_SECURE_SMMU_GSCL0		0x0b08
+#define EN_IP_GSCL_SECURE_SMMU_GSCL1		0x0b0c
+#define EN_IP_GSCL_SECURE_SMMU_MSCL0		0x0b10
+#define EN_IP_GSCL_SECURE_SMMU_MSCL1		0x0b14
+
+/*
+*Registers for CMU_ISP
+*/
+#define MUX_SEL_ISP0				0x0200
+#define MUX_SEL_ISP1				0x0204
+#define MUX_ENABLE_ISP0				0x0300
+#define MUX_ENABLE_ISP1				0x0304
+#define MUX_STAT_ISP0				0x0400
+#define MUX_STAT_ISP1				0x0404
+#define MUX_IGNORE_ISP0				0x0500
+#define MUX_IGNORE_ISP1				0x0504
+#define DIV_ISP					0x0600
+#define DIV_STAT_ISP				0x0700
+#define EN_ACLK_ISP0				0x0800
+#define EN_ACLK_ISP1				0x0804
+#define EN_PCLK_ISP0				0x0900
+#define EN_PCLK_ISP1				0x0904
+#define EN_SCLK_ISP				0x0a00
+#define EN_IP_ISP0				0x0b00
+#define EN_IP_ISP1				0x0b04
+
+/*
+*Registers for CMU_KFC
+*/
+#define KFC_PLL_LOCK				0x0000
+#define KFC_PLL_CON0				0x0100
+#define KFC_PLL_CON1				0x0104
+#define KFC_PLL_FDET				0x010c
+#define MUX_SEL_KFC0				0x0200
+#define MUX_SEL_KFC2				0x0208
+#define MUX_ENABLE_KFC0				0x0300
+#define MUX_ENABLE_KFC2				0x0308
+#define MUX_STAT_KFC0				0x0400
+#define MUX_STAT_KFC2				0x0408
+#define DIV_KFC					0x0600
+#define DIV_KFC_PLL_FDET			0x0604
+#define DIV_STAT_KFC				0x0700
+#define DIV_STAT_KFC_PLL_FDET			0x0704
+#define EN_ACLK_KFC				0x0800
+#define EN_PCLK_KFC				0x0900
+#define EN_SCLK_KFC				0x0a00
+#define EN_IP_KFC				0x0b00
+#define CLKOUT_CMU_KFC				0x0c00
+#define CLKOUT_CMU_KFC_DIV_STAT			0x0c04
+#define ARMCLK_STOPCTRL_KFC			0x1000
+#define ARM_EMA_CTRL				0x1008
+#define ARM_EMA_STATUS				0x100c
+#define PWR_CTRL_KFC				0x1020
+#define PWR_CTRL2_KFC				0x1024
+#define CLKSTOP_CTRL_KFC			0x1028
+#define INTR_SPREAD_ENABLE_KFC			0x1080
+#define INTR_SPREAD_USE_STANDBYWFI_KFC		0x1084
+#define INTR_SPREAD_BLOCKING_DURATION_KFC	0x1088
+#define CMU_KFC_SPARE0				0x2000
+#define CMU_KFC_SPARE1				0x2004
+#define CMU_KFC_SPARE2				0x2008
+#define CMU_KFC_SPARE3				0x200c
+#define CMU_KFC_SPARE4				0x2010
+
+/*
+*Registers for CMU_MFC
+*/
+#define MUX_SEL_MFC				0x0200
+#define MUX_ENABLE_MFC				0x0300
+#define MUX_STAT_MFC				0x0400
+#define DIV_MFC					0x0600
+#define DIV_STAT_MFC				0x0700
+#define EN_ACLK_MFC				0x0800
+#define EN_ACLK_SECURE_SMMU2_MFC		0x0804
+#define EN_PCLK_MFC				0x0900
+#define EN_PCLK_SECURE_SMMU2_MFC		0x0904
+#define EN_IP_MFC				0x0b00
+#define EN_IP_MFC_SECURE_SMMU2_MFC		0x0b04
+
+/*
+*Registers for CMU_MIF
+*/
+#define MEM_PLL_LOCK				0x0000
+#define BUS_PLL_LOCK				0x0004
+#define MEDIA_PLL_LOCK				0x0008
+#define MEM_PLL_CON0				0x0100
+#define MEM_PLL_CON1				0x0104
+#define MEM_PLL_FDET				0x010c
+#define BUS_PLL_CON0				0x0110
+#define BUS_PLL_CON1				0x0114
+#define BUS_PLL_FDET				0x011c
+#define MEDIA_PLL_CON0				0x0120
+#define MEDIA_PLL_CON1				0x0124
+#define MEDIA_PLL_FDET				0x012c
+#define MUX_SEL_MIF				0x0200
+#define MUX_ENABLE_MIF				0x0300
+#define MUX_STAT_MIF				0x0400
+#define MUX_IGNORE_MIF				0x0500
+#define DIV_MIF					0x0600
+#define DIV_MIF_PLL_FDET			0x0604
+#define DIV_STAT_MIF				0x0700
+#define DIV_STAT_MIF_PLL_FDET			0x0704
+#define EN_ACLK_MIF				0x0800
+#define EN_ACLK_MIF_SECURE_DREX1_TZ		0x0804
+#define EN_ACLK_MIF_SECURE_DREX0_TZ		0x0808
+#define EN_ACLK_MIF_SECURE_INTMEM		0x080c
+#define EN_PCLK_MIF				0x0900
+#define EN_PCLK_MIF_SECURE_MONOCNT		0x0904
+#define EN_PCLK_MIF_SECURE_RTC_APBIF		0x0908
+#define EN_PCLK_MIF_SECURE_DREX1_TZ		0x090c
+#define EN_PCLK_MIF_SECURE_DREX0_TZ		0x0910
+#define EN_SCLK_MIF				0x0a00
+#define EN_IP_MIF				0x0b00
+#define EN_IP_MIF_SECURE_MONOCNT		0x0b04
+#define EN_IP_MIF_SECURE_RTC_APBIF		0x0b08
+#define EN_IP_MIF_SECURE_DREX1_TZ		0x0b0c
+#define EN_IP_MIF_SECURE_DREX0_TZ		0x0b10
+#define EN_IP_MIF_SECURE_INTEMEM		0x0b14
+#define CLKOUT_CMU_MIF_DIV_STAT			0x0c04
+#define DREX_FREQ_CTRL				0x1000
+#define PAUSE					0x1004
+#define DDRPHY_LOCK_CTRL			0x1008
+#define CLKOUT_CMU_MIF				0xcb00
+
+/*
+*Registers for CMU_PERI
+*/
+#define MUX_SEL_PERI				0x0200
+#define MUX_SEL_PERI1				0x0204
+#define MUX_ENABLE_PERI				0x0300
+#define MUX_ENABLE_PERI1			0x0304
+#define MUX_STAT_PERI				0x0400
+#define MUX_STAT_PERI1				0x0404
+#define MUX_IGNORE_PERI				0x0500
+#define MUX_IGNORE_PERI1			0x0504
+#define DIV_PERI				0x0600
+#define DIV_STAT_PERI				0x0700
+#define EN_PCLK_PERI0				0x0800
+#define EN_PCLK_PERI1				0x0804
+#define EN_PCLK_PERI2				0x0808
+#define EN_PCLK_PERI3				0x080c
+#define EN_PCLK_PERI_SECURE_CHIPID		0x0810
+#define EN_PCLK_PERI_SECURE_PROVKEY0		0x0814
+#define EN_PCLK_PERI_SECURE_PROVKEY1		0x0818
+#define EN_PCLK_PERI_SECURE_SECKEY		0x081c
+#define EN_PCLK_PERI_SECURE_ANTIRBKCNT		0x0820
+#define EN_PCLK_PERI_SECURE_TOP_RTC		0x0824
+#define EN_PCLK_PERI_SECURE_TZPC		0x0828
+#define EN_SCLK_PERI				0x0a00
+#define EN_SCLK_PERI_SECURE_TOP_RTC		0x0a04
+#define EN_IP_PERI0				0x0b00
+#define EN_IP_PERI1				0x0b04
+#define EN_IP_PERI2				0x0b08
+#define EN_IP_PERI_SECURE_CHIPID		0x0b0c
+#define EN_IP_PERI_SECURE_PROVKEY0		0x0b10
+#define EN_IP_PERI_SECURE_PROVKEY1		0x0b14
+#define EN_IP_PERI_SECURE_SECKEY		0x0b18
+#define EN_IP_PERI_SECURE_ANTIRBKCNT		0x0b1c
+#define EN_IP_PERI_SECURE_TOP_RTC		0x0b20
+#define EN_IP_PERI_SECURE_TZPC			0x0b24
+
+/*
+*Registers for CMU_TOP
+*/
+#define DISP_PLL_LOCK				0x0000
+#define AUD_PLL_LOCK				0x0004
+#define DISP_PLL_CON0				0x0100
+#define DISP_PLL_CON1				0x0104
+#define DISP_PLL_FDET				0x0108
+#define AUD_PLL_CON0				0x0110
+#define AUD_PLL_CON1				0x0114
+#define AUD_PLL_CON2				0x0118
+#define AUD_PLL_FDET				0x011c
+#define MUX_SEL_TOP_PLL0			0x0200
+#define MUX_SEL_TOP_MFC				0x0204
+#define MUX_SEL_TOP_G2D				0x0208
+#define MUX_SEL_TOP_GSCL			0x020c
+#define MUX_SEL_TOP_ISP10			0x0214
+#define MUX_SEL_TOP_ISP11			0x0218
+#define MUX_SEL_TOP_DISP0			0x021c
+#define MUX_SEL_TOP_DISP1			0x0220
+#define MUX_SEL_TOP_BUS				0x0224
+#define MUX_SEL_TOP_PERI0			0x0228
+#define MUX_SEL_TOP_PERI1			0x022c
+#define MUX_SEL_TOP_FSYS			0x0230
+#define MUX_ENABLE_TOP_PLL0			0x0300
+#define MUX_ENABLE_TOP_MFC			0x0304
+#define MUX_ENABLE_TOP_G2D			0x0308
+#define MUX_ENABLE_TOP_GSCL			0x030c
+#define MUX_ENABLE_TOP_ISP10			0x0314
+#define MUX_ENABLE_TOP_ISP11			0x0318
+#define MUX_ENABLE_TOP_DISP0			0x031c
+#define MUX_ENABLE_TOP_DISP1			0x0320
+#define MUX_ENABLE_TOP_BUS			0x0324
+#define MUX_ENABLE_TOP_PERI0			0x0328
+#define MUX_ENABLE_TOP_PERI1			0x032c
+#define MUX_ENABLE_TOP_FSYS			0x0330
+#define MUX_STAT_TOP_PLL0			0x0400
+#define MUX_STAT_TOP_MFC			0x0404
+#define MUX_STAT_TOP_G2D			0x0408
+#define MUX_STAT_TOP_GSCL			0x040c
+#define MUX_STAT_TOP_ISP10			0x0414
+#define MUX_STAT_TOP_ISP11			0x0418
+#define MUX_STAT_TOP_DISP0			0x041c
+#define MUX_STAT_TOP_DISP1			0x0420
+#define MUX_STAT_TOP_BUS			0x0424
+#define MUX_STAT_TOP_PERI0			0x0428
+#define MUX_STAT_TOP_PERI1			0x042c
+#define MUX_STAT_TOP_FSYS			0x0430
+#define MUX_IGNORE_TOP_PLL0			0x0500
+#define MUX_IGNORE_TOP_MFC			0x0504
+#define MUX_IGNORE_TOP_G2D			0x0508
+#define MUX_IGNORE_TOP_GSCL			0x050c
+#define MUX_IGNORE_TOP_ISP10			0x0514
+#define MUX_IGNORE_TOP_ISP11			0x0518
+#define MUX_IGNORE_TOP_DISP0			0x051c
+#define MUX_IGNORE_TOP_DISP1			0x0520
+#define MUX_IGNORE_TOP_BUS			0x0524
+#define MUX_IGNORE_TOP_PERI0			0x0528
+#define MUX_IGNORE_TOP_PERI1			0x052c
+#define MUX_IGNORE_TOP_FSYS			0x0530
+#define DIV_TOP_G2D_MFC				0x0600
+#define DIV_TOP_GSCL_ISP0			0x0604
+#define DIV_TOP_ISP10				0x0608
+#define DIV_TOP_ISP11				0x060c
+#define DIV_TOP_DISP				0x0610
+#define DIV_TOP_BUS				0x0614
+#define DIV_TOP_PERI0				0x0618
+#define DIV_TOP_PERI1				0x061c
+#define DIV_TOP_PERI2				0x0620
+#define DIV_TOP_FSYS0				0x0624
+#define DIV_TOP_FSYS1				0x0628
+#define DIV_TOP_HPM				0x062c
+#define DIV_TOP_PLL_FDET			0x0630
+#define DIV_STAT_TOP_G2D_MFC			0x0700
+#define DIV_STAT_TOP_GSCL_ISP0			0x0704
+#define DIV_STAT_TOP_ISP10			0x0708
+#define DIV_STAT_TOP_ISP11			0x070c
+#define DIV_STAT_TOP_DISP			0x0710
+#define DIV_STAT_TOP_BUS			0x0714
+#define DIV_STAT_TOP_PERI0			0x0718
+#define DIV_STAT_TOP_PERI1			0x071c
+#define DIV_STAT_TOP_PERI2			0x0720
+#define DIV_STAT_TOP_FSYS0			0x0724
+#define DIV_STAT_TOP_FSYS1			0x0728
+#define DIV_STAT_TOP_HPM			0x072c
+#define DIV_STAT_TOP_PLL_FDET			0x0730
+#define EN_ACLK_TOP				0x0800
+#define EN_SCLK_TOP				0x0a00
+#define EN_IP_TOP				0x0b00
+#define CLKOUT_CMU_TOP				0x0c00
+#define CLKOUT_CMU_TOP_DIV_STAT			0x0c04
+
+#endif /*__CLK_EXYNOS5260_H */
+

drivers/clk/samsung/clk-exynos5420.c

@@ -27,18 +27,24 @@
 #define DIV_CPU1		0x504
 #define GATE_BUS_CPU		0x700
 #define GATE_SCLK_CPU		0x800
+#define CLKOUT_CMU_CPU		0xa00
+#define GATE_IP_G2D		0x8800
 #define CPLL_LOCK		0x10020
 #define DPLL_LOCK		0x10030
 #define EPLL_LOCK		0x10040
 #define RPLL_LOCK		0x10050
 #define IPLL_LOCK		0x10060
 #define SPLL_LOCK		0x10070
-#define VPLL_LOCK		0x10070
+#define VPLL_LOCK		0x10080
 #define MPLL_LOCK		0x10090
 #define CPLL_CON0		0x10120
 #define DPLL_CON0		0x10128
 #define EPLL_CON0		0x10130
+#define EPLL_CON1		0x10134
+#define EPLL_CON2		0x10138
 #define RPLL_CON0		0x10140
+#define RPLL_CON1		0x10144
+#define RPLL_CON2		0x10148
 #define IPLL_CON0		0x10150
 #define SPLL_CON0		0x10160
 #define VPLL_CON0		0x10170
@@ -51,21 +57,31 @@
 #define SRC_TOP5		0x10214
 #define SRC_TOP6		0x10218
 #define SRC_TOP7		0x1021c
+#define SRC_TOP8		0x10220 /* 5800 specific */
+#define SRC_TOP9		0x10224 /* 5800 specific */
 #define SRC_DISP10		0x1022c
 #define SRC_MAU			0x10240
 #define SRC_FSYS		0x10244
 #define SRC_PERIC0		0x10250
 #define SRC_PERIC1		0x10254
+#define SRC_ISP			0x10270
+#define SRC_CAM			0x10274 /* 5800 specific */
 #define SRC_TOP10		0x10280
 #define SRC_TOP11		0x10284
 #define SRC_TOP12		0x10288
-#define	SRC_MASK_DISP10		0x1032c
+#define SRC_TOP13		0x1028c /* 5800 specific */
+#define SRC_MASK_TOP2		0x10308
+#define SRC_MASK_TOP7		0x1031c
+#define SRC_MASK_DISP10		0x1032c
+#define SRC_MASK_MAU		0x10334
 #define SRC_MASK_FSYS		0x10340
 #define SRC_MASK_PERIC0		0x10350
 #define SRC_MASK_PERIC1		0x10354
 #define DIV_TOP0		0x10500
 #define DIV_TOP1		0x10504
 #define DIV_TOP2		0x10508
+#define DIV_TOP8		0x10520 /* 5800 specific */
+#define DIV_TOP9		0x10524 /* 5800 specific */
 #define DIV_DISP10		0x1052c
 #define DIV_MAU			0x10544
 #define DIV_FSYS0		0x10548
@@ -76,54 +92,82 @@
 #define DIV_PERIC2		0x10560
 #define DIV_PERIC3		0x10564
 #define DIV_PERIC4		0x10568
+#define DIV_CAM			0x10574 /* 5800 specific */
+#define SCLK_DIV_ISP0		0x10580
+#define SCLK_DIV_ISP1		0x10584
+#define DIV2_RATIO0		0x10590
+#define DIV4_RATIO		0x105a0
 #define GATE_BUS_TOP		0x10700
+#define GATE_BUS_GEN		0x1073c
 #define GATE_BUS_FSYS0		0x10740
+#define GATE_BUS_FSYS2		0x10748
 #define GATE_BUS_PERIC		0x10750
 #define GATE_BUS_PERIC1		0x10754
 #define GATE_BUS_PERIS0		0x10760
 #define GATE_BUS_PERIS1		0x10764
+#define GATE_BUS_NOC		0x10770
+#define GATE_TOP_SCLK_ISP	0x10870
 #define GATE_IP_GSCL0		0x10910
 #define GATE_IP_GSCL1		0x10920
+#define GATE_IP_CAM		0x10924 /* 5800 specific */
 #define GATE_IP_MFC		0x1092c
 #define GATE_IP_DISP1		0x10928
 #define GATE_IP_G3D		0x10930
 #define GATE_IP_GEN		0x10934
+#define GATE_IP_FSYS		0x10944
+#define GATE_IP_PERIC		0x10950
+#define GATE_IP_PERIS		0x10960
 #define GATE_IP_MSCL		0x10970
 #define GATE_TOP_SCLK_GSCL	0x10820
 #define GATE_TOP_SCLK_DISP1	0x10828
 #define GATE_TOP_SCLK_MAU	0x1083c
 #define GATE_TOP_SCLK_FSYS	0x10840
 #define GATE_TOP_SCLK_PERIC	0x10850
+#define TOP_SPARE2		0x10b08
 #define BPLL_LOCK		0x20010
 #define BPLL_CON0		0x20110
-#define SRC_CDREX		0x20200
 #define KPLL_LOCK		0x28000
 #define KPLL_CON0		0x28100
 #define SRC_KFC			0x28200
 #define DIV_KFC0		0x28500
 
+/* Exynos5x SoC type */
+enum exynos5x_soc {
+	EXYNOS5420,
+	EXYNOS5800,
+};
+
 /* list of PLLs */
-enum exynos5420_plls {
+enum exynos5x_plls {
 	apll, cpll, dpll, epll, rpll, ipll, spll, vpll, mpll,
 	bpll, kpll,
 	nr_plls			/* number of PLLs */
 };
 
 static void __iomem *reg_base;
+static enum exynos5x_soc exynos5x_soc;
 
 #ifdef CONFIG_PM_SLEEP
-static struct samsung_clk_reg_dump *exynos5420_save;
+static struct samsung_clk_reg_dump *exynos5x_save;
+static struct samsung_clk_reg_dump *exynos5800_save;
 
 /*
  * list of controller registers to be saved and restored during a
  * suspend/resume cycle.
  */
-static unsigned long exynos5420_clk_regs[] __initdata = {
+static unsigned long exynos5x_clk_regs[] __initdata = {
 	SRC_CPU,
 	DIV_CPU0,
 	DIV_CPU1,
 	GATE_BUS_CPU,
 	GATE_SCLK_CPU,
+	CLKOUT_CMU_CPU,
+	EPLL_CON0,
+	EPLL_CON1,
+	EPLL_CON2,
+	RPLL_CON0,
+	RPLL_CON1,
+	RPLL_CON2,
 	SRC_TOP0,
 	SRC_TOP1,
 	SRC_TOP2,
@@ -140,10 +184,13 @@ static unsigned long exynos5420_clk_regs[] __initdata = {
 	SRC_TOP10,
 	SRC_TOP11,
 	SRC_TOP12,
+	SRC_MASK_TOP2,
+	SRC_MASK_TOP7,
 	SRC_MASK_DISP10,
 	SRC_MASK_FSYS,
 	SRC_MASK_PERIC0,
 	SRC_MASK_PERIC1,
+	SRC_ISP,
 	DIV_TOP0,
 	DIV_TOP1,
 	DIV_TOP2,
@@ -157,41 +204,71 @@ static unsigned long exynos5420_clk_regs[] __initdata = {
 	DIV_PERIC2,
 	DIV_PERIC3,
 	DIV_PERIC4,
+	SCLK_DIV_ISP0,
+	SCLK_DIV_ISP1,
+	DIV2_RATIO0,
+	DIV4_RATIO,
 	GATE_BUS_TOP,
+	GATE_BUS_GEN,
 	GATE_BUS_FSYS0,
+	GATE_BUS_FSYS2,
 	GATE_BUS_PERIC,
 	GATE_BUS_PERIC1,
 	GATE_BUS_PERIS0,
 	GATE_BUS_PERIS1,
+	GATE_BUS_NOC,
+	GATE_TOP_SCLK_ISP,
 	GATE_IP_GSCL0,
 	GATE_IP_GSCL1,
 	GATE_IP_MFC,
 	GATE_IP_DISP1,
 	GATE_IP_G3D,
 	GATE_IP_GEN,
+	GATE_IP_FSYS,
+	GATE_IP_PERIC,
+	GATE_IP_PERIS,
 	GATE_IP_MSCL,
 	GATE_TOP_SCLK_GSCL,
 	GATE_TOP_SCLK_DISP1,
 	GATE_TOP_SCLK_MAU,
 	GATE_TOP_SCLK_FSYS,
 	GATE_TOP_SCLK_PERIC,
-	SRC_CDREX,
+	TOP_SPARE2,
 	SRC_KFC,
 	DIV_KFC0,
 };
 
+static unsigned long exynos5800_clk_regs[] __initdata = {
+	SRC_TOP8,
+	SRC_TOP9,
+	SRC_CAM,
+	SRC_TOP1,
+	DIV_TOP8,
+	DIV_TOP9,
+	DIV_CAM,
+	GATE_IP_CAM,
+};
+
 static int exynos5420_clk_suspend(void)
 {
-	samsung_clk_save(reg_base, exynos5420_save,
-				ARRAY_SIZE(exynos5420_clk_regs));
+	samsung_clk_save(reg_base, exynos5x_save,
+				ARRAY_SIZE(exynos5x_clk_regs));
+
+	if (exynos5x_soc == EXYNOS5800)
+		samsung_clk_save(reg_base, exynos5800_save,
+				ARRAY_SIZE(exynos5800_clk_regs));
 
 	return 0;
 }
 
 static void exynos5420_clk_resume(void)
 {
-	samsung_clk_restore(reg_base, exynos5420_save,
-				ARRAY_SIZE(exynos5420_clk_regs));
+	samsung_clk_restore(reg_base, exynos5x_save,
+				ARRAY_SIZE(exynos5x_clk_regs));
+
+	if (exynos5x_soc == EXYNOS5800)
+		samsung_clk_restore(reg_base, exynos5800_save,
+				ARRAY_SIZE(exynos5800_clk_regs));
 }
 
 static struct syscore_ops exynos5420_clk_syscore_ops = {
@@ -201,108 +278,183 @@ static struct syscore_ops exynos5420_clk_syscore_ops = {
 
 static void exynos5420_clk_sleep_init(void)
 {
-	exynos5420_save = samsung_clk_alloc_reg_dump(exynos5420_clk_regs,
-					ARRAY_SIZE(exynos5420_clk_regs));
-	if (!exynos5420_save) {
+	exynos5x_save = samsung_clk_alloc_reg_dump(exynos5x_clk_regs,
+					ARRAY_SIZE(exynos5x_clk_regs));
+	if (!exynos5x_save) {
 		pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
 			__func__);
 		return;
 	}
 
+	if (exynos5x_soc == EXYNOS5800) {
+		exynos5800_save =
+			samsung_clk_alloc_reg_dump(exynos5800_clk_regs,
+					ARRAY_SIZE(exynos5800_clk_regs));
+		if (!exynos5800_save)
+			goto err_soc;
+	}
+
 	register_syscore_ops(&exynos5420_clk_syscore_ops);
+	return;
+err_soc:
+	kfree(exynos5x_save);
+	pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+		__func__);
+	return;
 }
 #else
 static void exynos5420_clk_sleep_init(void) {}
 #endif
 
 /* list of all parent clocks */
-PNAME(mspll_cpu_p)	= { "sclk_cpll", "sclk_dpll",
-				"sclk_mpll", "sclk_spll" };
-PNAME(cpu_p)		= { "mout_apll" , "mout_mspll_cpu" };
-PNAME(kfc_p)		= { "mout_kpll" , "mout_mspll_kfc" };
-PNAME(apll_p)		= { "fin_pll", "fout_apll", };
-PNAME(bpll_p)		= { "fin_pll", "fout_bpll", };
-PNAME(cpll_p)		= { "fin_pll", "fout_cpll", };
-PNAME(dpll_p)		= { "fin_pll", "fout_dpll", };
-PNAME(epll_p)		= { "fin_pll", "fout_epll", };
-PNAME(ipll_p)		= { "fin_pll", "fout_ipll", };
-PNAME(kpll_p)		= { "fin_pll", "fout_kpll", };
-PNAME(mpll_p)		= { "fin_pll", "fout_mpll", };
-PNAME(rpll_p)		= { "fin_pll", "fout_rpll", };
-PNAME(spll_p)		= { "fin_pll", "fout_spll", };
-PNAME(vpll_p)		= { "fin_pll", "fout_vpll", };
-
-PNAME(group1_p)		= { "sclk_cpll", "sclk_dpll", "sclk_mpll" };
-PNAME(group2_p)		= { "fin_pll", "sclk_cpll", "sclk_dpll", "sclk_mpll",
-			  "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(group3_p)		= { "sclk_rpll", "sclk_spll" };
-PNAME(group4_p)		= { "sclk_ipll", "sclk_dpll", "sclk_mpll" };
-PNAME(group5_p)		= { "sclk_vpll", "sclk_dpll" };
-
-PNAME(sw_aclk66_p)	= { "dout_aclk66", "sclk_spll" };
-PNAME(aclk66_peric_p)	= { "fin_pll", "mout_sw_aclk66" };
-
-PNAME(sw_aclk200_fsys_p) = { "dout_aclk200_fsys", "sclk_spll"};
-PNAME(user_aclk200_fsys_p)	= { "fin_pll", "mout_sw_aclk200_fsys" };
-
-PNAME(sw_aclk200_fsys2_p) = { "dout_aclk200_fsys2", "sclk_spll"};
-PNAME(user_aclk200_fsys2_p)	= { "fin_pll", "mout_sw_aclk200_fsys2" };
-
-PNAME(sw_aclk200_p) = { "dout_aclk200", "sclk_spll"};
-PNAME(aclk200_disp1_p)	= { "fin_pll", "mout_sw_aclk200" };
-
-PNAME(sw_aclk400_mscl_p) = { "dout_aclk400_mscl", "sclk_spll"};
-PNAME(user_aclk400_mscl_p)	= { "fin_pll", "mout_sw_aclk400_mscl" };
-
-PNAME(sw_aclk333_p) = { "dout_aclk333", "sclk_spll"};
-PNAME(user_aclk333_p)	= { "fin_pll", "mout_sw_aclk333" };
-
-PNAME(sw_aclk166_p) = { "dout_aclk166", "sclk_spll"};
-PNAME(user_aclk166_p)	= { "fin_pll", "mout_sw_aclk166" };
-
-PNAME(sw_aclk266_p) = { "dout_aclk266", "sclk_spll"};
-PNAME(user_aclk266_p)	= { "fin_pll", "mout_sw_aclk266" };
-
-PNAME(sw_aclk333_432_gscl_p) = { "dout_aclk333_432_gscl", "sclk_spll"};
-PNAME(user_aclk333_432_gscl_p)	= { "fin_pll", "mout_sw_aclk333_432_gscl" };
-
-PNAME(sw_aclk300_gscl_p) = { "dout_aclk300_gscl", "sclk_spll"};
-PNAME(user_aclk300_gscl_p)	= { "fin_pll", "mout_sw_aclk300_gscl" };
-
-PNAME(sw_aclk300_disp1_p) = { "dout_aclk300_disp1", "sclk_spll"};
-PNAME(user_aclk300_disp1_p)	= { "fin_pll", "mout_sw_aclk300_disp1" };
-
-PNAME(sw_aclk300_jpeg_p) = { "dout_aclk300_jpeg", "sclk_spll"};
-PNAME(user_aclk300_jpeg_p)	= { "fin_pll", "mout_sw_aclk300_jpeg" };
-
-PNAME(sw_aclk_g3d_p) = { "dout_aclk_g3d", "sclk_spll"};
-PNAME(user_aclk_g3d_p)	= { "fin_pll", "mout_sw_aclk_g3d" };
-
-PNAME(sw_aclk266_g2d_p) = { "dout_aclk266_g2d", "sclk_spll"};
-PNAME(user_aclk266_g2d_p)	= { "fin_pll", "mout_sw_aclk266_g2d" };
-
-PNAME(sw_aclk333_g2d_p) = { "dout_aclk333_g2d", "sclk_spll"};
-PNAME(user_aclk333_g2d_p)	= { "fin_pll", "mout_sw_aclk333_g2d" };
-
-PNAME(audio0_p)	= { "fin_pll", "cdclk0", "sclk_dpll", "sclk_mpll",
-		  "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(audio1_p)	= { "fin_pll", "cdclk1", "sclk_dpll", "sclk_mpll",
-		  "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(audio2_p)	= { "fin_pll", "cdclk2", "sclk_dpll", "sclk_mpll",
-		  "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(spdif_p)	= { "fin_pll", "dout_audio0", "dout_audio1", "dout_audio2",
-		  "spdif_extclk", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(hdmi_p)	= { "dout_hdmi_pixel", "sclk_hdmiphy" };
-PNAME(maudio0_p)	= { "fin_pll", "maudio_clk", "sclk_dpll", "sclk_mpll",
-			  "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
+PNAME(mout_mspll_cpu_p) = {"mout_sclk_cpll", "mout_sclk_dpll",
+				"mout_sclk_mpll", "mout_sclk_spll"};
+PNAME(mout_cpu_p) = {"mout_apll" , "mout_mspll_cpu"};
+PNAME(mout_kfc_p) = {"mout_kpll" , "mout_mspll_kfc"};
+PNAME(mout_apll_p) = {"fin_pll", "fout_apll"};
+PNAME(mout_bpll_p) = {"fin_pll", "fout_bpll"};
+PNAME(mout_cpll_p) = {"fin_pll", "fout_cpll"};
+PNAME(mout_dpll_p) = {"fin_pll", "fout_dpll"};
+PNAME(mout_epll_p) = {"fin_pll", "fout_epll"};
+PNAME(mout_ipll_p) = {"fin_pll", "fout_ipll"};
+PNAME(mout_kpll_p) = {"fin_pll", "fout_kpll"};
+PNAME(mout_mpll_p) = {"fin_pll", "fout_mpll"};
+PNAME(mout_rpll_p) = {"fin_pll", "fout_rpll"};
+PNAME(mout_spll_p) = {"fin_pll", "fout_spll"};
+PNAME(mout_vpll_p) = {"fin_pll", "fout_vpll"};
+
+PNAME(mout_group1_p) = {"mout_sclk_cpll", "mout_sclk_dpll",
+					"mout_sclk_mpll"};
+PNAME(mout_group2_p) = {"fin_pll", "mout_sclk_cpll",
+			"mout_sclk_dpll", "mout_sclk_mpll", "mout_sclk_spll",
+			"mout_sclk_ipll", "mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_group3_p) = {"mout_sclk_rpll", "mout_sclk_spll"};
+PNAME(mout_group4_p) = {"mout_sclk_ipll", "mout_sclk_dpll", "mout_sclk_mpll"};
+PNAME(mout_group5_p) = {"mout_sclk_vpll", "mout_sclk_dpll"};
+
+PNAME(mout_fimd1_final_p) = {"mout_fimd1", "mout_fimd1_opt"};
+PNAME(mout_sw_aclk66_p)	= {"dout_aclk66", "mout_sclk_spll"};
+PNAME(mout_user_aclk66_peric_p)	= { "fin_pll", "mout_sw_aclk66"};
+PNAME(mout_user_pclk66_gpio_p) = {"mout_sw_aclk66", "ff_sw_aclk66"};
+
+PNAME(mout_sw_aclk200_fsys_p) = {"dout_aclk200_fsys", "mout_sclk_spll"};
+PNAME(mout_sw_pclk200_fsys_p) = {"dout_pclk200_fsys", "mout_sclk_spll"};
+PNAME(mout_user_pclk200_fsys_p)	= {"fin_pll", "mout_sw_pclk200_fsys"};
+PNAME(mout_user_aclk200_fsys_p)	= {"fin_pll", "mout_sw_aclk200_fsys"};
+
+PNAME(mout_sw_aclk200_fsys2_p) = {"dout_aclk200_fsys2", "mout_sclk_spll"};
+PNAME(mout_user_aclk200_fsys2_p) = {"fin_pll", "mout_sw_aclk200_fsys2"};
+PNAME(mout_sw_aclk100_noc_p) = {"dout_aclk100_noc", "mout_sclk_spll"};
+PNAME(mout_user_aclk100_noc_p) = {"fin_pll", "mout_sw_aclk100_noc"};
+
+PNAME(mout_sw_aclk400_wcore_p) = {"dout_aclk400_wcore", "mout_sclk_spll"};
+PNAME(mout_aclk400_wcore_bpll_p) = {"mout_aclk400_wcore", "sclk_bpll"};
+PNAME(mout_user_aclk400_wcore_p) = {"fin_pll", "mout_sw_aclk400_wcore"};
+
+PNAME(mout_sw_aclk400_isp_p) = {"dout_aclk400_isp", "mout_sclk_spll"};
+PNAME(mout_user_aclk400_isp_p) = {"fin_pll", "mout_sw_aclk400_isp"};
+
+PNAME(mout_sw_aclk333_432_isp0_p) = {"dout_aclk333_432_isp0",
+					"mout_sclk_spll"};
+PNAME(mout_user_aclk333_432_isp0_p) = {"fin_pll", "mout_sw_aclk333_432_isp0"};
+
+PNAME(mout_sw_aclk333_432_isp_p) = {"dout_aclk333_432_isp", "mout_sclk_spll"};
+PNAME(mout_user_aclk333_432_isp_p) = {"fin_pll", "mout_sw_aclk333_432_isp"};
+
+PNAME(mout_sw_aclk200_p) = {"dout_aclk200", "mout_sclk_spll"};
+PNAME(mout_user_aclk200_disp1_p) = {"fin_pll", "mout_sw_aclk200"};
+
+PNAME(mout_sw_aclk400_mscl_p) = {"dout_aclk400_mscl", "mout_sclk_spll"};
+PNAME(mout_user_aclk400_mscl_p)	= {"fin_pll", "mout_sw_aclk400_mscl"};
+
+PNAME(mout_sw_aclk333_p) = {"dout_aclk333", "mout_sclk_spll"};
+PNAME(mout_user_aclk333_p) = {"fin_pll", "mout_sw_aclk333"};
+
+PNAME(mout_sw_aclk166_p) = {"dout_aclk166", "mout_sclk_spll"};
+PNAME(mout_user_aclk166_p) = {"fin_pll", "mout_sw_aclk166"};
+
+PNAME(mout_sw_aclk266_p) = {"dout_aclk266", "mout_sclk_spll"};
+PNAME(mout_user_aclk266_p) = {"fin_pll", "mout_sw_aclk266"};
+PNAME(mout_user_aclk266_isp_p) = {"fin_pll", "mout_sw_aclk266"};
+
+PNAME(mout_sw_aclk333_432_gscl_p) = {"dout_aclk333_432_gscl", "mout_sclk_spll"};
+PNAME(mout_user_aclk333_432_gscl_p) = {"fin_pll", "mout_sw_aclk333_432_gscl"};
+
+PNAME(mout_sw_aclk300_gscl_p) = {"dout_aclk300_gscl", "mout_sclk_spll"};
+PNAME(mout_user_aclk300_gscl_p)	= {"fin_pll", "mout_sw_aclk300_gscl"};
+
+PNAME(mout_sw_aclk300_disp1_p) = {"dout_aclk300_disp1", "mout_sclk_spll"};
+PNAME(mout_sw_aclk400_disp1_p) = {"dout_aclk400_disp1", "mout_sclk_spll"};
+PNAME(mout_user_aclk300_disp1_p) = {"fin_pll", "mout_sw_aclk300_disp1"};
+PNAME(mout_user_aclk400_disp1_p) = {"fin_pll", "mout_sw_aclk400_disp1"};
+
+PNAME(mout_sw_aclk300_jpeg_p) = {"dout_aclk300_jpeg", "mout_sclk_spll"};
+PNAME(mout_user_aclk300_jpeg_p) = {"fin_pll", "mout_sw_aclk300_jpeg"};
+
+PNAME(mout_sw_aclk_g3d_p) = {"dout_aclk_g3d", "mout_sclk_spll"};
+PNAME(mout_user_aclk_g3d_p) = {"fin_pll", "mout_sw_aclk_g3d"};
+
+PNAME(mout_sw_aclk266_g2d_p) = {"dout_aclk266_g2d", "mout_sclk_spll"};
+PNAME(mout_user_aclk266_g2d_p) = {"fin_pll", "mout_sw_aclk266_g2d"};
+
+PNAME(mout_sw_aclk333_g2d_p) = {"dout_aclk333_g2d", "mout_sclk_spll"};
+PNAME(mout_user_aclk333_g2d_p) = {"fin_pll", "mout_sw_aclk333_g2d"};
+
+PNAME(mout_audio0_p) = {"fin_pll", "cdclk0", "mout_sclk_dpll",
+			"mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll",
+			"mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_audio1_p) = {"fin_pll", "cdclk1", "mout_sclk_dpll",
+			"mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll",
+			"mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_audio2_p) = {"fin_pll", "cdclk2", "mout_sclk_dpll",
+			"mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll",
+			"mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_spdif_p) = {"fin_pll", "dout_audio0", "dout_audio1",
+			"dout_audio2", "spdif_extclk", "mout_sclk_ipll",
+			"mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_hdmi_p) = {"dout_hdmi_pixel", "sclk_hdmiphy"};
+PNAME(mout_maudio0_p) = {"fin_pll", "maudio_clk", "mout_sclk_dpll",
+			 "mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll",
+			 "mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_mau_epll_clk_p) = {"mout_sclk_epll", "mout_sclk_dpll",
+				"mout_sclk_mpll", "mout_sclk_spll"};
+/* List of parents specific to exynos5800 */
+PNAME(mout_epll2_5800_p)	= { "mout_sclk_epll", "ff_dout_epll2" };
+PNAME(mout_group1_5800_p)	= { "mout_sclk_cpll", "mout_sclk_dpll",
+				"mout_sclk_mpll", "ff_dout_spll2" };
+PNAME(mout_group2_5800_p)	= { "mout_sclk_cpll", "mout_sclk_dpll",
+					"mout_sclk_mpll", "ff_dout_spll2",
+					"mout_epll2", "mout_sclk_ipll" };
+PNAME(mout_group3_5800_p)	= { "mout_sclk_cpll", "mout_sclk_dpll",
+					"mout_sclk_mpll", "ff_dout_spll2",
+					"mout_epll2" };
+PNAME(mout_group5_5800_p)	= { "mout_sclk_cpll", "mout_sclk_dpll",
+					"mout_sclk_mpll", "mout_sclk_spll" };
+PNAME(mout_group6_5800_p)	= { "mout_sclk_ipll", "mout_sclk_dpll",
+				"mout_sclk_mpll", "ff_dout_spll2" };
+PNAME(mout_group7_5800_p)	= { "mout_sclk_cpll", "mout_sclk_dpll",
+					"mout_sclk_mpll", "mout_sclk_spll",
+					"mout_epll2", "mout_sclk_ipll" };
+PNAME(mout_mau_epll_clk_5800_p)	= { "mout_sclk_epll", "mout_sclk_dpll",
+					"mout_sclk_mpll",
+					"ff_dout_spll2" };
+PNAME(mout_group8_5800_p)	= { "dout_aclk432_scaler", "dout_sclk_sw" };
+PNAME(mout_group9_5800_p)	= { "dout_osc_div", "mout_sw_aclk432_scaler" };
+PNAME(mout_group10_5800_p)	= { "dout_aclk432_cam", "dout_sclk_sw" };
+PNAME(mout_group11_5800_p)	= { "dout_osc_div", "mout_sw_aclk432_cam" };
+PNAME(mout_group12_5800_p)	= { "dout_aclkfl1_550_cam", "dout_sclk_sw" };
+PNAME(mout_group13_5800_p)	= { "dout_osc_div", "mout_sw_aclkfl1_550_cam" };
+PNAME(mout_group14_5800_p)	= { "dout_aclk550_cam", "dout_sclk_sw" };
+PNAME(mout_group15_5800_p)	= { "dout_osc_div", "mout_sw_aclk550_cam" };
 
 /* fixed rate clocks generated outside the soc */
-static struct samsung_fixed_rate_clock exynos5420_fixed_rate_ext_clks[] __initdata = {
+static struct samsung_fixed_rate_clock
+		exynos5x_fixed_rate_ext_clks[] __initdata = {
 	FRATE(CLK_FIN_PLL, "fin_pll", NULL, CLK_IS_ROOT, 0),
 };
 
 /* fixed rate clocks generated inside the soc */
-static struct samsung_fixed_rate_clock exynos5420_fixed_rate_clks[] __initdata = {
+static struct samsung_fixed_rate_clock exynos5x_fixed_rate_clks[] __initdata = {
 	FRATE(CLK_SCLK_HDMIPHY, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 24000000),
 	FRATE(0, "sclk_pwi", NULL, CLK_IS_ROOT, 24000000),
 	FRATE(0, "sclk_usbh20", NULL, CLK_IS_ROOT, 48000000),
@@ -310,146 +462,309 @@ static struct samsung_fixed_rate_clock exynos5420_fixed_rate_clks[] __initdata =
 	FRATE(0, "sclk_usbh20_scan_clk", NULL, CLK_IS_ROOT, 480000000),
 };
 
-static struct samsung_fixed_factor_clock exynos5420_fixed_factor_clks[] __initdata = {
-	FFACTOR(0, "sclk_hsic_12m", "fin_pll", 1, 2, 0),
+static struct samsung_fixed_factor_clock
+		exynos5x_fixed_factor_clks[] __initdata = {
+	FFACTOR(0, "ff_hsic_12m", "fin_pll", 1, 2, 0),
+	FFACTOR(0, "ff_sw_aclk66", "mout_sw_aclk66", 1, 2, 0),
 };
 
-static struct samsung_mux_clock exynos5420_mux_clks[] __initdata = {
-	MUX(0, "mout_mspll_kfc", mspll_cpu_p, SRC_TOP7, 8, 2),
-	MUX(0, "mout_mspll_cpu", mspll_cpu_p, SRC_TOP7, 12, 2),
-	MUX(0, "mout_apll", apll_p, SRC_CPU, 0, 1),
-	MUX(0, "mout_cpu", cpu_p, SRC_CPU, 16, 1),
-	MUX(0, "mout_kpll", kpll_p, SRC_KFC, 0, 1),
-	MUX(0, "mout_cpu_kfc", kfc_p, SRC_KFC, 16, 1),
-
-	MUX(0, "sclk_bpll", bpll_p, SRC_CDREX, 0, 1),
-
-	MUX_A(0, "mout_aclk400_mscl", group1_p,
-			SRC_TOP0, 4, 2, "aclk400_mscl"),
-	MUX(0, "mout_aclk200", group1_p, SRC_TOP0, 8, 2),
-	MUX(0, "mout_aclk200_fsys2", group1_p, SRC_TOP0, 12, 2),
-	MUX(0, "mout_aclk200_fsys", group1_p, SRC_TOP0, 28, 2),
-
-	MUX(0, "mout_aclk333_432_gscl", group4_p, SRC_TOP1, 0, 2),
-	MUX(0, "mout_aclk66", group1_p, SRC_TOP1, 8, 2),
-	MUX(0, "mout_aclk266", group1_p, SRC_TOP1, 20, 2),
-	MUX(0, "mout_aclk166", group1_p, SRC_TOP1, 24, 2),
-	MUX(0, "mout_aclk333", group1_p, SRC_TOP1, 28, 2),
-
-	MUX(0, "mout_aclk333_g2d", group1_p, SRC_TOP2, 8, 2),
-	MUX(0, "mout_aclk266_g2d", group1_p, SRC_TOP2, 12, 2),
-	MUX(0, "mout_aclk_g3d", group5_p, SRC_TOP2, 16, 1),
-	MUX(0, "mout_aclk300_jpeg", group1_p, SRC_TOP2, 20, 2),
-	MUX(0, "mout_aclk300_disp1", group1_p, SRC_TOP2, 24, 2),
-	MUX(0, "mout_aclk300_gscl", group1_p, SRC_TOP2, 28, 2),
-
-	MUX(0, "mout_user_aclk400_mscl", user_aclk400_mscl_p,
+static struct samsung_fixed_factor_clock
+		exynos5800_fixed_factor_clks[] __initdata = {
+	FFACTOR(0, "ff_dout_epll2", "mout_sclk_epll", 1, 2, 0),
+	FFACTOR(0, "ff_dout_spll2", "mout_sclk_spll", 1, 2, 0),
+};
+
+struct samsung_mux_clock exynos5800_mux_clks[] __initdata = {
+	MUX(0, "mout_aclk400_isp", mout_group3_5800_p, SRC_TOP0, 0, 3),
+	MUX(0, "mout_aclk400_mscl", mout_group3_5800_p, SRC_TOP0, 4, 3),
+	MUX(0, "mout_aclk400_wcore", mout_group2_5800_p, SRC_TOP0, 16, 3),
+	MUX(0, "mout_aclk100_noc", mout_group1_5800_p, SRC_TOP0, 20, 2),
+
+	MUX(0, "mout_aclk333_432_gscl", mout_group6_5800_p, SRC_TOP1, 0, 2),
+	MUX(0, "mout_aclk333_432_isp", mout_group6_5800_p, SRC_TOP1, 4, 2),
+	MUX(0, "mout_aclk333_432_isp0", mout_group6_5800_p, SRC_TOP1, 12, 2),
+	MUX(0, "mout_aclk266", mout_group5_5800_p, SRC_TOP1, 20, 2),
+	MUX(0, "mout_aclk333", mout_group1_5800_p, SRC_TOP1, 28, 2),
+
+	MUX(0, "mout_aclk400_disp1", mout_group7_5800_p, SRC_TOP2, 4, 3),
+	MUX(0, "mout_aclk333_g2d", mout_group5_5800_p, SRC_TOP2, 8, 2),
+	MUX(0, "mout_aclk266_g2d", mout_group5_5800_p, SRC_TOP2, 12, 2),
+	MUX(0, "mout_aclk300_jpeg", mout_group5_5800_p, SRC_TOP2, 20, 2),
+	MUX(0, "mout_aclk300_disp1", mout_group5_5800_p, SRC_TOP2, 24, 2),
+	MUX(0, "mout_aclk300_gscl", mout_group5_5800_p, SRC_TOP2, 28, 2),
+
+	MUX(0, "mout_mau_epll_clk", mout_mau_epll_clk_5800_p, SRC_TOP7,
+			20, 2),
+	MUX(0, "sclk_bpll", mout_bpll_p, SRC_TOP7, 24, 1),
+	MUX(0, "mout_epll2", mout_epll2_5800_p, SRC_TOP7, 28, 1),
+
+	MUX(0, "mout_aclk550_cam", mout_group3_5800_p, SRC_TOP8, 16, 3),
+	MUX(0, "mout_aclkfl1_550_cam", mout_group3_5800_p, SRC_TOP8, 20, 3),
+	MUX(0, "mout_aclk432_cam", mout_group6_5800_p, SRC_TOP8, 24, 2),
+	MUX(0, "mout_aclk432_scaler", mout_group6_5800_p, SRC_TOP8, 28, 2),
+
+	MUX(0, "mout_user_aclk550_cam", mout_group15_5800_p,
+							SRC_TOP9, 16, 1),
+	MUX(0, "mout_user_aclkfl1_550_cam", mout_group13_5800_p,
+							SRC_TOP9, 20, 1),
+	MUX(0, "mout_user_aclk432_cam", mout_group11_5800_p,
+							SRC_TOP9, 24, 1),
+	MUX(0, "mout_user_aclk432_scaler", mout_group9_5800_p,
+							SRC_TOP9, 28, 1),
+
+	MUX(0, "mout_sw_aclk550_cam", mout_group14_5800_p, SRC_TOP13, 16, 1),
+	MUX(0, "mout_sw_aclkfl1_550_cam", mout_group12_5800_p,
+							SRC_TOP13, 20, 1),
+	MUX(0, "mout_sw_aclk432_cam", mout_group10_5800_p,
+							SRC_TOP13, 24, 1),
+	MUX(0, "mout_sw_aclk432_scaler", mout_group8_5800_p,
+							SRC_TOP13, 28, 1),
+
+	MUX(0, "mout_fimd1", mout_group2_p, SRC_DISP10, 4, 3),
+};
+
+struct samsung_div_clock exynos5800_div_clks[] __initdata = {
+	DIV(0, "dout_aclk400_wcore", "mout_aclk400_wcore", DIV_TOP0, 16, 3),
+
+	DIV(0, "dout_aclk550_cam", "mout_aclk550_cam",
+				DIV_TOP8, 16, 3),
+	DIV(0, "dout_aclkfl1_550_cam", "mout_aclkfl1_550_cam",
+				DIV_TOP8, 20, 3),
+	DIV(0, "dout_aclk432_cam", "mout_aclk432_cam",
+				DIV_TOP8, 24, 3),
+	DIV(0, "dout_aclk432_scaler", "mout_aclk432_scaler",
+				DIV_TOP8, 28, 3),
+
+	DIV(0, "dout_osc_div", "fin_pll", DIV_TOP9, 20, 3),
+	DIV(0, "dout_sclk_sw", "sclk_spll", DIV_TOP9, 24, 6),
+};
+
+struct samsung_gate_clock exynos5800_gate_clks[] __initdata = {
+	GATE(CLK_ACLK550_CAM, "aclk550_cam", "mout_user_aclk550_cam",
+				GATE_BUS_TOP, 24, 0, 0),
+	GATE(CLK_ACLK432_SCALER, "aclk432_scaler", "mout_user_aclk432_scaler",
+				GATE_BUS_TOP, 27, 0, 0),
+};
+
+struct samsung_mux_clock exynos5420_mux_clks[] __initdata = {
+	MUX(0, "sclk_bpll", mout_bpll_p, TOP_SPARE2, 0, 1),
+	MUX(0, "mout_aclk400_wcore_bpll", mout_aclk400_wcore_bpll_p,
+				TOP_SPARE2, 4, 1),
+
+	MUX(0, "mout_aclk400_isp", mout_group1_p, SRC_TOP0, 0, 2),
+	MUX_A(0, "mout_aclk400_mscl", mout_group1_p,
+				SRC_TOP0, 4, 2, "aclk400_mscl"),
+	MUX(0, "mout_aclk400_wcore", mout_group1_p, SRC_TOP0, 16, 2),
+	MUX(0, "mout_aclk100_noc", mout_group1_p, SRC_TOP0, 20, 2),
+
+	MUX(0, "mout_aclk333_432_gscl", mout_group4_p, SRC_TOP1, 0, 2),
+	MUX(0, "mout_aclk333_432_isp", mout_group4_p,
+				SRC_TOP1, 4, 2),
+	MUX(0, "mout_aclk333_432_isp0", mout_group4_p, SRC_TOP1, 12, 2),
+	MUX(0, "mout_aclk266", mout_group1_p, SRC_TOP1, 20, 2),
+	MUX(0, "mout_aclk333", mout_group1_p, SRC_TOP1, 28, 2),
+
+	MUX(0, "mout_aclk400_disp1", mout_group1_p, SRC_TOP2, 4, 2),
+	MUX(0, "mout_aclk333_g2d", mout_group1_p, SRC_TOP2, 8, 2),
+	MUX(0, "mout_aclk266_g2d", mout_group1_p, SRC_TOP2, 12, 2),
+	MUX(0, "mout_aclk300_jpeg", mout_group1_p, SRC_TOP2, 20, 2),
+	MUX(0, "mout_aclk300_disp1", mout_group1_p, SRC_TOP2, 24, 2),
+	MUX(0, "mout_aclk300_gscl", mout_group1_p, SRC_TOP2, 28, 2),
+
+	MUX(0, "mout_mau_epll_clk", mout_mau_epll_clk_p, SRC_TOP7, 20, 2),
+
+	MUX(0, "mout_fimd1", mout_group3_p, SRC_DISP10, 4, 1),
+};
+
+struct samsung_div_clock exynos5420_div_clks[] __initdata = {
+	DIV(0, "dout_aclk400_wcore", "mout_aclk400_wcore_bpll",
+			DIV_TOP0, 16, 3),
+};
+
+static struct samsung_mux_clock exynos5x_mux_clks[] __initdata = {
+	MUX(0, "mout_user_pclk66_gpio", mout_user_pclk66_gpio_p,
+			SRC_TOP7, 4, 1),
+	MUX(0, "mout_mspll_kfc", mout_mspll_cpu_p, SRC_TOP7, 8, 2),
+	MUX(0, "mout_mspll_cpu", mout_mspll_cpu_p, SRC_TOP7, 12, 2),
+
+	MUX(0, "mout_apll", mout_apll_p, SRC_CPU, 0, 1),
+	MUX(0, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
+	MUX(0, "mout_kpll", mout_kpll_p, SRC_KFC, 0, 1),
+	MUX(0, "mout_kfc", mout_kfc_p, SRC_KFC, 16, 1),
+
+	MUX(0, "mout_aclk200", mout_group1_p, SRC_TOP0, 8, 2),
+	MUX(0, "mout_aclk200_fsys2", mout_group1_p, SRC_TOP0, 12, 2),
+	MUX(0, "mout_pclk200_fsys", mout_group1_p, SRC_TOP0, 24, 2),
+	MUX(0, "mout_aclk200_fsys", mout_group1_p, SRC_TOP0, 28, 2),
+
+	MUX(0, "mout_aclk66", mout_group1_p, SRC_TOP1, 8, 2),
+	MUX(0, "mout_aclk166", mout_group1_p, SRC_TOP1, 24, 2),
+
+	MUX(0, "mout_aclk_g3d", mout_group5_p, SRC_TOP2, 16, 1),
+
+	MUX(0, "mout_user_aclk400_isp", mout_user_aclk400_isp_p,
+			SRC_TOP3, 0, 1),
+	MUX(0, "mout_user_aclk400_mscl", mout_user_aclk400_mscl_p,
 			SRC_TOP3, 4, 1),
-	MUX_A(0, "mout_aclk200_disp1", aclk200_disp1_p,
-			SRC_TOP3, 8, 1, "aclk200_disp1"),
-	MUX(0, "mout_user_aclk200_fsys2", user_aclk200_fsys2_p,
+	MUX(0, "mout_user_aclk200_disp1", mout_user_aclk200_disp1_p,
+			SRC_TOP3, 8, 1),
+	MUX(0, "mout_user_aclk200_fsys2", mout_user_aclk200_fsys2_p,
 			SRC_TOP3, 12, 1),
-	MUX(0, "mout_user_aclk200_fsys", user_aclk200_fsys_p,
+	MUX(0, "mout_user_aclk400_wcore", mout_user_aclk400_wcore_p,
+			SRC_TOP3, 16, 1),
+	MUX(0, "mout_user_aclk100_noc", mout_user_aclk100_noc_p,
+			SRC_TOP3, 20, 1),
+	MUX(0, "mout_user_pclk200_fsys", mout_user_pclk200_fsys_p,
+			SRC_TOP3, 24, 1),
+	MUX(0, "mout_user_aclk200_fsys", mout_user_aclk200_fsys_p,
 			SRC_TOP3, 28, 1),
 
-	MUX(0, "mout_user_aclk333_432_gscl", user_aclk333_432_gscl_p,
+	MUX(0, "mout_user_aclk333_432_gscl", mout_user_aclk333_432_gscl_p,
 			SRC_TOP4, 0, 1),
-	MUX(0, "mout_aclk66_peric", aclk66_peric_p, SRC_TOP4, 8, 1),
-	MUX(0, "mout_user_aclk266", user_aclk266_p, SRC_TOP4, 20, 1),
-	MUX(0, "mout_user_aclk166", user_aclk166_p, SRC_TOP4, 24, 1),
-	MUX(0, "mout_user_aclk333", user_aclk333_p, SRC_TOP4, 28, 1),
-
-	MUX(0, "mout_aclk66_psgen", aclk66_peric_p, SRC_TOP5, 4, 1),
-	MUX(0, "mout_user_aclk333_g2d", user_aclk333_g2d_p, SRC_TOP5, 8, 1),
-	MUX(0, "mout_user_aclk266_g2d", user_aclk266_g2d_p, SRC_TOP5, 12, 1),
-	MUX_A(0, "mout_user_aclk_g3d", user_aclk_g3d_p,
-			SRC_TOP5, 16, 1, "aclkg3d"),
-	MUX(0, "mout_user_aclk300_jpeg", user_aclk300_jpeg_p,
+	MUX(0, "mout_user_aclk333_432_isp", mout_user_aclk333_432_isp_p,
+			SRC_TOP4, 4, 1),
+	MUX(0, "mout_user_aclk66_peric", mout_user_aclk66_peric_p,
+			SRC_TOP4, 8, 1),
+	MUX(0, "mout_user_aclk333_432_isp0", mout_user_aclk333_432_isp0_p,
+			SRC_TOP4, 12, 1),
+	MUX(0, "mout_user_aclk266_isp", mout_user_aclk266_isp_p,
+			SRC_TOP4, 16, 1),
+	MUX(0, "mout_user_aclk266", mout_user_aclk266_p, SRC_TOP4, 20, 1),
+	MUX(0, "mout_user_aclk166", mout_user_aclk166_p, SRC_TOP4, 24, 1),
+	MUX(0, "mout_user_aclk333", mout_user_aclk333_p, SRC_TOP4, 28, 1),
+
+	MUX(0, "mout_user_aclk400_disp1", mout_user_aclk400_disp1_p,
+			SRC_TOP5, 0, 1),
+	MUX(0, "mout_user_aclk66_psgen", mout_user_aclk66_peric_p,
+			SRC_TOP5, 4, 1),
+	MUX(0, "mout_user_aclk333_g2d", mout_user_aclk333_g2d_p,
+			SRC_TOP5, 8, 1),
+	MUX(0, "mout_user_aclk266_g2d", mout_user_aclk266_g2d_p,
+			SRC_TOP5, 12, 1),
+	MUX(CLK_MOUT_G3D, "mout_user_aclk_g3d", mout_user_aclk_g3d_p,
+			SRC_TOP5, 16, 1),
+	MUX(0, "mout_user_aclk300_jpeg", mout_user_aclk300_jpeg_p,
 			SRC_TOP5, 20, 1),
-	MUX(0, "mout_user_aclk300_disp1", user_aclk300_disp1_p,
+	MUX(0, "mout_user_aclk300_disp1", mout_user_aclk300_disp1_p,
 			SRC_TOP5, 24, 1),
-	MUX(0, "mout_user_aclk300_gscl", user_aclk300_gscl_p,
+	MUX(0, "mout_user_aclk300_gscl", mout_user_aclk300_gscl_p,
 			SRC_TOP5, 28, 1),
 
-	MUX(0, "sclk_mpll", mpll_p, SRC_TOP6, 0, 1),
-	MUX(0, "sclk_vpll", vpll_p, SRC_TOP6, 4, 1),
-	MUX(0, "sclk_spll", spll_p, SRC_TOP6, 8, 1),
-	MUX(0, "sclk_ipll", ipll_p, SRC_TOP6, 12, 1),
-	MUX(0, "sclk_rpll", rpll_p, SRC_TOP6, 16, 1),
-	MUX(0, "sclk_epll", epll_p, SRC_TOP6, 20, 1),
-	MUX(0, "sclk_dpll", dpll_p, SRC_TOP6, 24, 1),
-	MUX(0, "sclk_cpll", cpll_p, SRC_TOP6, 28, 1),
-
-	MUX(0, "mout_sw_aclk400_mscl", sw_aclk400_mscl_p, SRC_TOP10, 4, 1),
-	MUX(0, "mout_sw_aclk200", sw_aclk200_p, SRC_TOP10, 8, 1),
-	MUX(0, "mout_sw_aclk200_fsys2", sw_aclk200_fsys2_p,
+	MUX(0, "mout_sclk_mpll", mout_mpll_p, SRC_TOP6, 0, 1),
+	MUX(CLK_MOUT_VPLL, "mout_sclk_vpll", mout_vpll_p, SRC_TOP6, 4, 1),
+	MUX(0, "mout_sclk_spll", mout_spll_p, SRC_TOP6, 8, 1),
+	MUX(0, "mout_sclk_ipll", mout_ipll_p, SRC_TOP6, 12, 1),
+	MUX(0, "mout_sclk_rpll", mout_rpll_p, SRC_TOP6, 16, 1),
+	MUX(0, "mout_sclk_epll", mout_epll_p, SRC_TOP6, 20, 1),
+	MUX(0, "mout_sclk_dpll", mout_dpll_p, SRC_TOP6, 24, 1),
+	MUX(0, "mout_sclk_cpll", mout_cpll_p, SRC_TOP6, 28, 1),
+
+	MUX(0, "mout_sw_aclk400_isp", mout_sw_aclk400_isp_p,
+			SRC_TOP10, 0, 1),
+	MUX(0, "mout_sw_aclk400_mscl", mout_sw_aclk400_mscl_p,
+			SRC_TOP10, 4, 1),
+	MUX(0, "mout_sw_aclk200", mout_sw_aclk200_p, SRC_TOP10, 8, 1),
+	MUX(0, "mout_sw_aclk200_fsys2", mout_sw_aclk200_fsys2_p,
 			SRC_TOP10, 12, 1),
-	MUX(0, "mout_sw_aclk200_fsys", sw_aclk200_fsys_p, SRC_TOP10, 28, 1),
-
-	MUX(0, "mout_sw_aclk333_432_gscl", sw_aclk333_432_gscl_p,
+	MUX(0, "mout_sw_aclk400_wcore", mout_sw_aclk400_wcore_p,
+			SRC_TOP10, 16, 1),
+	MUX(0, "mout_sw_aclk100_noc", mout_sw_aclk100_noc_p,
+			SRC_TOP10, 20, 1),
+	MUX(0, "mout_sw_pclk200_fsys", mout_sw_pclk200_fsys_p,
+			SRC_TOP10, 24, 1),
+	MUX(0, "mout_sw_aclk200_fsys", mout_sw_aclk200_fsys_p,
+			SRC_TOP10, 28, 1),
+
+	MUX(0, "mout_sw_aclk333_432_gscl", mout_sw_aclk333_432_gscl_p,
 			SRC_TOP11, 0, 1),
-	MUX(0, "mout_sw_aclk66", sw_aclk66_p, SRC_TOP11, 8, 1),
-	MUX(0, "mout_sw_aclk266", sw_aclk266_p, SRC_TOP11, 20, 1),
-	MUX(0, "mout_sw_aclk166", sw_aclk166_p, SRC_TOP11, 24, 1),
-	MUX(0, "mout_sw_aclk333", sw_aclk333_p, SRC_TOP11, 28, 1),
-
-	MUX(0, "mout_sw_aclk333_g2d", sw_aclk333_g2d_p, SRC_TOP12, 8, 1),
-	MUX(0, "mout_sw_aclk266_g2d", sw_aclk266_g2d_p, SRC_TOP12, 12, 1),
-	MUX(0, "mout_sw_aclk_g3d", sw_aclk_g3d_p, SRC_TOP12, 16, 1),
-	MUX(0, "mout_sw_aclk300_jpeg", sw_aclk300_jpeg_p, SRC_TOP12, 20, 1),
-	MUX(0, "mout_sw_aclk300_disp1", sw_aclk300_disp1_p,
+	MUX(0, "mout_sw_aclk333_432_isp", mout_sw_aclk333_432_isp_p,
+			SRC_TOP11, 4, 1),
+	MUX(0, "mout_sw_aclk66", mout_sw_aclk66_p, SRC_TOP11, 8, 1),
+	MUX(0, "mout_sw_aclk333_432_isp0", mout_sw_aclk333_432_isp0_p,
+			SRC_TOP11, 12, 1),
+	MUX(0, "mout_sw_aclk266", mout_sw_aclk266_p, SRC_TOP11, 20, 1),
+	MUX(0, "mout_sw_aclk166", mout_sw_aclk166_p, SRC_TOP11, 24, 1),
+	MUX(0, "mout_sw_aclk333", mout_sw_aclk333_p, SRC_TOP11, 28, 1),
+
+	MUX(0, "mout_sw_aclk400_disp1", mout_sw_aclk400_disp1_p,
+			SRC_TOP12, 4, 1),
+	MUX(0, "mout_sw_aclk333_g2d", mout_sw_aclk333_g2d_p,
+			SRC_TOP12, 8, 1),
+	MUX(0, "mout_sw_aclk266_g2d", mout_sw_aclk266_g2d_p,
+			SRC_TOP12, 12, 1),
+	MUX(0, "mout_sw_aclk_g3d", mout_sw_aclk_g3d_p, SRC_TOP12, 16, 1),
+	MUX(0, "mout_sw_aclk300_jpeg", mout_sw_aclk300_jpeg_p,
+			SRC_TOP12, 20, 1),
+	MUX(0, "mout_sw_aclk300_disp1", mout_sw_aclk300_disp1_p,
 			SRC_TOP12, 24, 1),
-	MUX(0, "mout_sw_aclk300_gscl", sw_aclk300_gscl_p, SRC_TOP12, 28, 1),
+	MUX(0, "mout_sw_aclk300_gscl", mout_sw_aclk300_gscl_p,
+			SRC_TOP12, 28, 1),
 
 	/* DISP1 Block */
-	MUX(0, "mout_fimd1", group3_p, SRC_DISP10, 4, 1),
-	MUX(0, "mout_mipi1", group2_p, SRC_DISP10, 16, 3),
-	MUX(0, "mout_dp1", group2_p, SRC_DISP10, 20, 3),
-	MUX(0, "mout_pixel", group2_p, SRC_DISP10, 24, 3),
-	MUX(CLK_MOUT_HDMI, "mout_hdmi", hdmi_p, SRC_DISP10, 28, 1),
+	MUX(0, "mout_mipi1", mout_group2_p, SRC_DISP10, 16, 3),
+	MUX(0, "mout_dp1", mout_group2_p, SRC_DISP10, 20, 3),
+	MUX(0, "mout_pixel", mout_group2_p, SRC_DISP10, 24, 3),
+	MUX(CLK_MOUT_HDMI, "mout_hdmi", mout_hdmi_p, SRC_DISP10, 28, 1),
+	MUX(0, "mout_fimd1_opt", mout_group2_p, SRC_DISP10, 8, 3),
+
+	MUX(0, "mout_fimd1_final", mout_fimd1_final_p, TOP_SPARE2, 8, 1),
 
 	/* MAU Block */
-	MUX(0, "mout_maudio0", maudio0_p, SRC_MAU, 28, 3),
+	MUX(CLK_MOUT_MAUDIO0, "mout_maudio0", mout_maudio0_p, SRC_MAU, 28, 3),
 
 	/* FSYS Block */
-	MUX(0, "mout_usbd301", group2_p, SRC_FSYS, 4, 3),
-	MUX(0, "mout_mmc0", group2_p, SRC_FSYS, 8, 3),
-	MUX(0, "mout_mmc1", group2_p, SRC_FSYS, 12, 3),
-	MUX(0, "mout_mmc2", group2_p, SRC_FSYS, 16, 3),
-	MUX(0, "mout_usbd300", group2_p, SRC_FSYS, 20, 3),
-	MUX(0, "mout_unipro", group2_p, SRC_FSYS, 24, 3),
+	MUX(0, "mout_usbd301", mout_group2_p, SRC_FSYS, 4, 3),
+	MUX(0, "mout_mmc0", mout_group2_p, SRC_FSYS, 8, 3),
+	MUX(0, "mout_mmc1", mout_group2_p, SRC_FSYS, 12, 3),
+	MUX(0, "mout_mmc2", mout_group2_p, SRC_FSYS, 16, 3),
+	MUX(0, "mout_usbd300", mout_group2_p, SRC_FSYS, 20, 3),
+	MUX(0, "mout_unipro", mout_group2_p, SRC_FSYS, 24, 3),
+	MUX(0, "mout_mphy_refclk", mout_group2_p, SRC_FSYS, 28, 3),
 
 	/* PERIC Block */
-	MUX(0, "mout_uart0", group2_p, SRC_PERIC0, 4, 3),
-	MUX(0, "mout_uart1", group2_p, SRC_PERIC0, 8, 3),
-	MUX(0, "mout_uart2", group2_p, SRC_PERIC0, 12, 3),
-	MUX(0, "mout_uart3", group2_p, SRC_PERIC0, 16, 3),
-	MUX(0, "mout_pwm", group2_p, SRC_PERIC0, 24, 3),
-	MUX(0, "mout_spdif", spdif_p, SRC_PERIC0, 28, 3),
-	MUX(0, "mout_audio0", audio0_p, SRC_PERIC1, 8, 3),
-	MUX(0, "mout_audio1", audio1_p, SRC_PERIC1, 12, 3),
-	MUX(0, "mout_audio2", audio2_p, SRC_PERIC1, 16, 3),
-	MUX(0, "mout_spi0", group2_p, SRC_PERIC1, 20, 3),
-	MUX(0, "mout_spi1", group2_p, SRC_PERIC1, 24, 3),
-	MUX(0, "mout_spi2", group2_p, SRC_PERIC1, 28, 3),
+	MUX(0, "mout_uart0", mout_group2_p, SRC_PERIC0, 4, 3),
+	MUX(0, "mout_uart1", mout_group2_p, SRC_PERIC0, 8, 3),
+	MUX(0, "mout_uart2", mout_group2_p, SRC_PERIC0, 12, 3),
+	MUX(0, "mout_uart3", mout_group2_p, SRC_PERIC0, 16, 3),
+	MUX(0, "mout_pwm", mout_group2_p, SRC_PERIC0, 24, 3),
+	MUX(0, "mout_spdif", mout_spdif_p, SRC_PERIC0, 28, 3),
+	MUX(0, "mout_audio0", mout_audio0_p, SRC_PERIC1, 8, 3),
+	MUX(0, "mout_audio1", mout_audio1_p, SRC_PERIC1, 12, 3),
+	MUX(0, "mout_audio2", mout_audio2_p, SRC_PERIC1, 16, 3),
+	MUX(0, "mout_spi0", mout_group2_p, SRC_PERIC1, 20, 3),
+	MUX(0, "mout_spi1", mout_group2_p, SRC_PERIC1, 24, 3),
+	MUX(0, "mout_spi2", mout_group2_p, SRC_PERIC1, 28, 3),
+
+	/* ISP Block */
+	MUX(0, "mout_pwm_isp", mout_group2_p, SRC_ISP, 24, 3),
+	MUX(0, "mout_uart_isp", mout_group2_p, SRC_ISP, 20, 3),
+	MUX(0, "mout_spi0_isp", mout_group2_p, SRC_ISP, 12, 3),
+	MUX(0, "mout_spi1_isp", mout_group2_p, SRC_ISP, 16, 3),
+	MUX(0, "mout_isp_sensor", mout_group2_p, SRC_ISP, 28, 3),
 };
 
-static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
+static struct samsung_div_clock exynos5x_div_clks[] __initdata = {
 	DIV(0, "div_arm", "mout_cpu", DIV_CPU0, 0, 3),
 	DIV(0, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3),
 	DIV(0, "armclk2", "div_arm", DIV_CPU0, 28, 3),
-	DIV(0, "div_kfc", "mout_cpu_kfc", DIV_KFC0, 0, 3),
+	DIV(0, "div_kfc", "mout_kfc", DIV_KFC0, 0, 3),
 	DIV(0, "sclk_kpll", "mout_kpll", DIV_KFC0, 24, 3),
 
+	DIV(0, "dout_aclk400_isp", "mout_aclk400_isp", DIV_TOP0, 0, 3),
 	DIV(0, "dout_aclk400_mscl", "mout_aclk400_mscl", DIV_TOP0, 4, 3),
 	DIV(0, "dout_aclk200", "mout_aclk200", DIV_TOP0, 8, 3),
 	DIV(0, "dout_aclk200_fsys2", "mout_aclk200_fsys2", DIV_TOP0, 12, 3),
+	DIV(0, "dout_aclk100_noc", "mout_aclk100_noc", DIV_TOP0, 20, 3),
 	DIV(0, "dout_pclk200_fsys", "mout_pclk200_fsys", DIV_TOP0, 24, 3),
 	DIV(0, "dout_aclk200_fsys", "mout_aclk200_fsys", DIV_TOP0, 28, 3),
 
 	DIV(0, "dout_aclk333_432_gscl", "mout_aclk333_432_gscl",
 			DIV_TOP1, 0, 3),
+	DIV(0, "dout_aclk333_432_isp", "mout_aclk333_432_isp",
+			DIV_TOP1, 4, 3),
 	DIV(0, "dout_aclk66", "mout_aclk66", DIV_TOP1, 8, 6),
+	DIV(0, "dout_aclk333_432_isp0", "mout_aclk333_432_isp0",
+			DIV_TOP1, 16, 3),
 	DIV(0, "dout_aclk266", "mout_aclk266", DIV_TOP1, 20, 3),
 	DIV(0, "dout_aclk166", "mout_aclk166", DIV_TOP1, 24, 3),
 	DIV(0, "dout_aclk333", "mout_aclk333", DIV_TOP1, 28, 3),
@@ -458,15 +773,16 @@ static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
 	DIV(0, "dout_aclk266_g2d", "mout_aclk266_g2d", DIV_TOP2, 12, 3),
 	DIV(0, "dout_aclk_g3d", "mout_aclk_g3d", DIV_TOP2, 16, 3),
 	DIV(0, "dout_aclk300_jpeg", "mout_aclk300_jpeg", DIV_TOP2, 20, 3),
-	DIV_A(0, "dout_aclk300_disp1", "mout_aclk300_disp1",
-			DIV_TOP2, 24, 3, "aclk300_disp1"),
+	DIV(0, "dout_aclk300_disp1", "mout_aclk300_disp1", DIV_TOP2, 24, 3),
 	DIV(0, "dout_aclk300_gscl", "mout_aclk300_gscl", DIV_TOP2, 28, 3),
 
 	/* DISP1 Block */
-	DIV(0, "dout_fimd1", "mout_fimd1", DIV_DISP10, 0, 4),
+	DIV(0, "dout_fimd1", "mout_fimd1_final", DIV_DISP10, 0, 4),
 	DIV(0, "dout_mipi1", "mout_mipi1", DIV_DISP10, 16, 8),
 	DIV(0, "dout_dp1", "mout_dp1", DIV_DISP10, 24, 4),
 	DIV(CLK_DOUT_PIXEL, "dout_hdmi_pixel", "mout_pixel", DIV_DISP10, 28, 4),
+	DIV(0, "dout_disp1_blk", "aclk200_disp1", DIV2_RATIO0, 16, 2),
+	DIV(0, "dout_aclk400_disp1", "mout_aclk400_disp1", DIV_TOP2, 4, 3),
 
 	/* Audio Block */
 	DIV(0, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4),
@@ -484,6 +800,7 @@ static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
 	DIV(0, "dout_mmc2", "mout_mmc2", DIV_FSYS1, 20, 10),
 
 	DIV(0, "dout_unipro", "mout_unipro", DIV_FSYS2, 24, 8),
+	DIV(0, "dout_mphy_refclk", "mout_mphy_refclk", DIV_FSYS2, 16, 8),
 
 	/* UART and PWM */
 	DIV(0, "dout_uart0", "mout_uart0", DIV_PERIC0, 8, 4),
@@ -497,6 +814,9 @@ static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
 	DIV(0, "dout_spi1", "mout_spi1", DIV_PERIC1, 24, 4),
 	DIV(0, "dout_spi2", "mout_spi2", DIV_PERIC1, 28, 4),
 
+	/* Mfc Block */
+	DIV(0, "dout_mfc_blk", "mout_user_aclk333", DIV4_RATIO, 0, 2),
+
 	/* PCM */
 	DIV(0, "dout_pcm1", "dout_audio1", DIV_PERIC2, 16, 8),
 	DIV(0, "dout_pcm2", "dout_audio2", DIV_PERIC2, 24, 8),
@@ -509,15 +829,43 @@ static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
 	DIV(0, "dout_audio2", "mout_audio2", DIV_PERIC3, 28, 4),
 
 	/* SPI Pre-Ratio */
-	DIV(0, "dout_pre_spi0", "dout_spi0", DIV_PERIC4, 8, 8),
-	DIV(0, "dout_pre_spi1", "dout_spi1", DIV_PERIC4, 16, 8),
-	DIV(0, "dout_pre_spi2", "dout_spi2", DIV_PERIC4, 24, 8),
+	DIV(0, "dout_spi0_pre", "dout_spi0", DIV_PERIC4, 8, 8),
+	DIV(0, "dout_spi1_pre", "dout_spi1", DIV_PERIC4, 16, 8),
+	DIV(0, "dout_spi2_pre", "dout_spi2", DIV_PERIC4, 24, 8),
+
+	/* GSCL Block */
+	DIV(0, "dout_gscl_blk_300", "mout_user_aclk300_gscl",
+			DIV2_RATIO0, 4, 2),
+	DIV(0, "dout_gscl_blk_333", "aclk333_432_gscl", DIV2_RATIO0, 6, 2),
+
+	/* MSCL Block */
+	DIV(0, "dout_mscl_blk", "aclk400_mscl", DIV2_RATIO0, 28, 2),
+
+	/* PSGEN */
+	DIV(0, "dout_gen_blk", "mout_user_aclk266", DIV2_RATIO0, 8, 1),
+	DIV(0, "dout_jpg_blk", "aclk166", DIV2_RATIO0, 20, 1),
+
+	/* ISP Block */
+	DIV(0, "dout_isp_sensor0", "mout_isp_sensor", SCLK_DIV_ISP0, 8, 8),
+	DIV(0, "dout_isp_sensor1", "mout_isp_sensor", SCLK_DIV_ISP0, 16, 8),
+	DIV(0, "dout_isp_sensor2", "mout_isp_sensor", SCLK_DIV_ISP0, 24, 8),
+	DIV(0, "dout_pwm_isp", "mout_pwm_isp", SCLK_DIV_ISP1, 28, 4),
+	DIV(0, "dout_uart_isp", "mout_uart_isp", SCLK_DIV_ISP1, 24, 4),
+	DIV(0, "dout_spi0_isp", "mout_spi0_isp", SCLK_DIV_ISP1, 16, 4),
+	DIV(0, "dout_spi1_isp", "mout_spi1_isp", SCLK_DIV_ISP1, 20, 4),
+	DIV_F(0, "dout_spi0_isp_pre", "dout_spi0_isp", SCLK_DIV_ISP1, 0, 8,
+			CLK_SET_RATE_PARENT, 0),
+	DIV_F(0, "dout_spi1_isp_pre", "dout_spi1_isp", SCLK_DIV_ISP1, 8, 8,
+			CLK_SET_RATE_PARENT, 0),
 };
 
-static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
-	/* TODO: Re-verify the CG bits for all the gate clocks */
-	GATE_A(CLK_MCT, "pclk_st", "aclk66_psgen", GATE_BUS_PERIS1, 2, 0, 0,
-		"mct"),
+static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = {
+	/* G2D */
+	GATE(CLK_MDMA0, "mdma0", "aclk266_g2d", GATE_IP_G2D, 1, 0, 0),
+	GATE(CLK_SSS, "sss", "aclk266_g2d", GATE_IP_G2D, 2, 0, 0),
+	GATE(CLK_G2D, "g2d", "aclk333_g2d", GATE_IP_G2D, 3, 0, 0),
+	GATE(CLK_SMMU_MDMA0, "smmu_mdma0", "aclk266_g2d", GATE_IP_G2D, 5, 0, 0),
+	GATE(CLK_SMMU_G2D, "smmu_g2d", "aclk333_g2d", GATE_IP_G2D, 7, 0, 0),
 
 	GATE(0, "aclk200_fsys", "mout_user_aclk200_fsys",
 			GATE_BUS_FSYS0, 9, CLK_IGNORE_UNUSED, 0),
@@ -530,20 +878,42 @@ static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
 			GATE_BUS_TOP, 1, CLK_IGNORE_UNUSED, 0),
 	GATE(0, "aclk300_jpeg", "mout_user_aclk300_jpeg",
 			GATE_BUS_TOP, 4, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "aclk333_432_isp0", "mout_user_aclk333_432_isp0",
+			GATE_BUS_TOP, 5, 0, 0),
 	GATE(0, "aclk300_gscl", "mout_user_aclk300_gscl",
 			GATE_BUS_TOP, 6, CLK_IGNORE_UNUSED, 0),
 	GATE(0, "aclk333_432_gscl", "mout_user_aclk333_432_gscl",
 			GATE_BUS_TOP, 7, CLK_IGNORE_UNUSED, 0),
-	GATE(0, "pclk66_gpio", "mout_sw_aclk66",
+	GATE(0, "aclk333_432_isp", "mout_user_aclk333_432_isp",
+			GATE_BUS_TOP, 8, 0, 0),
+	GATE(CLK_PCLK66_GPIO, "pclk66_gpio", "mout_user_pclk66_gpio",
 			GATE_BUS_TOP, 9, CLK_IGNORE_UNUSED, 0),
-	GATE(0, "aclk66_psgen", "mout_aclk66_psgen",
+	GATE(0, "aclk66_psgen", "mout_user_aclk66_psgen",
 			GATE_BUS_TOP, 10, CLK_IGNORE_UNUSED, 0),
-	GATE(0, "aclk66_peric", "mout_aclk66_peric",
-			GATE_BUS_TOP, 11, 0, 0),
+	GATE(CLK_ACLK66_PERIC, "aclk66_peric", "mout_user_aclk66_peric",
+			GATE_BUS_TOP, 11, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "aclk266_isp", "mout_user_aclk266_isp",
+			GATE_BUS_TOP, 13, 0, 0),
 	GATE(0, "aclk166", "mout_user_aclk166",
 			GATE_BUS_TOP, 14, CLK_IGNORE_UNUSED, 0),
 	GATE(0, "aclk333", "mout_aclk333",
 			GATE_BUS_TOP, 15, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "aclk400_isp", "mout_user_aclk400_isp",
+			GATE_BUS_TOP, 16, 0, 0),
+	GATE(0, "aclk400_mscl", "mout_user_aclk400_mscl",
+			GATE_BUS_TOP, 17, 0, 0),
+	GATE(0, "aclk200_disp1", "mout_user_aclk200_disp1",
+			GATE_BUS_TOP, 18, 0, 0),
+	GATE(CLK_SCLK_MPHY_IXTAL24, "sclk_mphy_ixtal24", "mphy_refclk_ixtal24",
+			GATE_BUS_TOP, 28, 0, 0),
+	GATE(CLK_SCLK_HSIC_12M, "sclk_hsic_12m", "ff_hsic_12m",
+			GATE_BUS_TOP, 29, 0, 0),
+
+	GATE(0, "aclk300_disp1", "mout_user_aclk300_disp1",
+			SRC_MASK_TOP2, 24, 0, 0),
+
+	GATE(CLK_MAU_EPLL, "mau_epll", "mout_mau_epll_clk",
+			SRC_MASK_TOP7, 20, 0, 0),
 
 	/* sclk */
 	GATE(CLK_SCLK_UART0, "sclk_uart0", "dout_uart0",
@@ -554,11 +924,11 @@ static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
 		GATE_TOP_SCLK_PERIC, 2, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_UART3, "sclk_uart3", "dout_uart3",
 		GATE_TOP_SCLK_PERIC, 3, CLK_SET_RATE_PARENT, 0),
-	GATE(CLK_SCLK_SPI0, "sclk_spi0", "dout_pre_spi0",
+	GATE(CLK_SCLK_SPI0, "sclk_spi0", "dout_spi0_pre",
 		GATE_TOP_SCLK_PERIC, 6, CLK_SET_RATE_PARENT, 0),
-	GATE(CLK_SCLK_SPI1, "sclk_spi1", "dout_pre_spi1",
+	GATE(CLK_SCLK_SPI1, "sclk_spi1", "dout_spi1_pre",
 		GATE_TOP_SCLK_PERIC, 7, CLK_SET_RATE_PARENT, 0),
-	GATE(CLK_SCLK_SPI2, "sclk_spi2", "dout_pre_spi2",
+	GATE(CLK_SCLK_SPI2, "sclk_spi2", "dout_spi2_pre",
 		GATE_TOP_SCLK_PERIC, 8, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_SPDIF, "sclk_spdif", "mout_spdif",
 		GATE_TOP_SCLK_PERIC, 9, CLK_SET_RATE_PARENT, 0),
@@ -588,164 +958,191 @@ static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
 	GATE(CLK_SCLK_USBD301, "sclk_usbd301", "dout_usbd301",
 		GATE_TOP_SCLK_FSYS, 10, CLK_SET_RATE_PARENT, 0),
 
-	GATE(CLK_SCLK_USBD301, "sclk_unipro", "dout_unipro",
-		SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
-
-	GATE(CLK_SCLK_GSCL_WA, "sclk_gscl_wa", "aclK333_432_gscl",
-		GATE_TOP_SCLK_GSCL, 6, CLK_SET_RATE_PARENT, 0),
-	GATE(CLK_SCLK_GSCL_WB, "sclk_gscl_wb", "aclk333_432_gscl",
-		GATE_TOP_SCLK_GSCL, 7, CLK_SET_RATE_PARENT, 0),
-
 	/* Display */
 	GATE(CLK_SCLK_FIMD1, "sclk_fimd1", "dout_fimd1",
-		GATE_TOP_SCLK_DISP1, 0, CLK_SET_RATE_PARENT, 0),
+			GATE_TOP_SCLK_DISP1, 0, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_MIPI1, "sclk_mipi1", "dout_mipi1",
-		GATE_TOP_SCLK_DISP1, 3, CLK_SET_RATE_PARENT, 0),
+			GATE_TOP_SCLK_DISP1, 3, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_HDMI, "sclk_hdmi", "mout_hdmi",
-		GATE_TOP_SCLK_DISP1, 9, CLK_SET_RATE_PARENT, 0),
+			GATE_TOP_SCLK_DISP1, 9, 0, 0),
 	GATE(CLK_SCLK_PIXEL, "sclk_pixel", "dout_hdmi_pixel",
-		GATE_TOP_SCLK_DISP1, 10, CLK_SET_RATE_PARENT, 0),
+			GATE_TOP_SCLK_DISP1, 10, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_DP1, "sclk_dp1", "dout_dp1",
-		GATE_TOP_SCLK_DISP1, 20, CLK_SET_RATE_PARENT, 0),
+			GATE_TOP_SCLK_DISP1, 20, CLK_SET_RATE_PARENT, 0),
 
 	/* Maudio Block */
 	GATE(CLK_SCLK_MAUDIO0, "sclk_maudio0", "dout_maudio0",
 		GATE_TOP_SCLK_MAU, 0, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_MAUPCM0, "sclk_maupcm0", "dout_maupcm0",
 		GATE_TOP_SCLK_MAU, 1, CLK_SET_RATE_PARENT, 0),
-	/* FSYS */
+
+	/* FSYS Block */
 	GATE(CLK_TSI, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0),
 	GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0),
 	GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0),
 	GATE(CLK_UFS, "ufs", "aclk200_fsys2", GATE_BUS_FSYS0, 3, 0, 0),
-	GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_BUS_FSYS0, 5, 0, 0),
-	GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_BUS_FSYS0, 12, 0, 0),
-	GATE(CLK_MMC1, "mmc1", "aclk200_fsys2", GATE_BUS_FSYS0, 13, 0, 0),
-	GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_BUS_FSYS0, 14, 0, 0),
+	GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_IP_FSYS, 9, 0, 0),
+	GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_IP_FSYS, 12, 0, 0),
+	GATE(CLK_MMC1, "mmc1", "aclk200_fsys2", GATE_IP_FSYS, 13, 0, 0),
+	GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_IP_FSYS, 14, 0, 0),
 	GATE(CLK_SROMC, "sromc", "aclk200_fsys2",
-			GATE_BUS_FSYS0, 19, CLK_IGNORE_UNUSED, 0),
-	GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_BUS_FSYS0, 20, 0, 0),
-	GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_BUS_FSYS0, 21, 0, 0),
-	GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_BUS_FSYS0, 28, 0, 0),
-
-	/* UART */
-	GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_BUS_PERIC, 4, 0, 0),
-	GATE(CLK_UART1, "uart1", "aclk66_peric", GATE_BUS_PERIC, 5, 0, 0),
-	GATE_A(CLK_UART2, "uart2", "aclk66_peric",
-		GATE_BUS_PERIC, 6, CLK_IGNORE_UNUSED, 0, "uart2"),
-	GATE(CLK_UART3, "uart3", "aclk66_peric", GATE_BUS_PERIC, 7, 0, 0),
-	/* I2C */
-	GATE(CLK_I2C0, "i2c0", "aclk66_peric", GATE_BUS_PERIC, 9, 0, 0),
-	GATE(CLK_I2C1, "i2c1", "aclk66_peric", GATE_BUS_PERIC, 10, 0, 0),
-	GATE(CLK_I2C2, "i2c2", "aclk66_peric", GATE_BUS_PERIC, 11, 0, 0),
-	GATE(CLK_I2C3, "i2c3", "aclk66_peric", GATE_BUS_PERIC, 12, 0, 0),
-	GATE(CLK_I2C4, "i2c4", "aclk66_peric", GATE_BUS_PERIC, 13, 0, 0),
-	GATE(CLK_I2C5, "i2c5", "aclk66_peric", GATE_BUS_PERIC, 14, 0, 0),
-	GATE(CLK_I2C6, "i2c6", "aclk66_peric", GATE_BUS_PERIC, 15, 0, 0),
-	GATE(CLK_I2C7, "i2c7", "aclk66_peric", GATE_BUS_PERIC, 16, 0, 0),
-	GATE(CLK_I2C_HDMI, "i2c_hdmi", "aclk66_peric", GATE_BUS_PERIC, 17, 0,
-		0),
-	GATE(CLK_TSADC, "tsadc", "aclk66_peric", GATE_BUS_PERIC, 18, 0, 0),
-	/* SPI */
-	GATE(CLK_SPI0, "spi0", "aclk66_peric", GATE_BUS_PERIC, 19, 0, 0),
-	GATE(CLK_SPI1, "spi1", "aclk66_peric", GATE_BUS_PERIC, 20, 0, 0),
-	GATE(CLK_SPI2, "spi2", "aclk66_peric", GATE_BUS_PERIC, 21, 0, 0),
-	GATE(CLK_KEYIF, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0),
-	/* I2S */
-	GATE(CLK_I2S1, "i2s1", "aclk66_peric", GATE_BUS_PERIC, 23, 0, 0),
-	GATE(CLK_I2S2, "i2s2", "aclk66_peric", GATE_BUS_PERIC, 24, 0, 0),
-	/* PCM */
-	GATE(CLK_PCM1, "pcm1", "aclk66_peric", GATE_BUS_PERIC, 25, 0, 0),
-	GATE(CLK_PCM2, "pcm2", "aclk66_peric", GATE_BUS_PERIC, 26, 0, 0),
-	/* PWM */
-	GATE(CLK_PWM, "pwm", "aclk66_peric", GATE_BUS_PERIC, 27, 0, 0),
-	/* SPDIF */
-	GATE(CLK_SPDIF, "spdif", "aclk66_peric", GATE_BUS_PERIC, 29, 0, 0),
+			GATE_IP_FSYS, 17, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0),
+	GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0),
+	GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0),
+	GATE(CLK_SCLK_UNIPRO, "sclk_unipro", "dout_unipro",
+			SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
 
-	GATE(CLK_I2C8, "i2c8", "aclk66_peric", GATE_BUS_PERIC1, 0, 0, 0),
-	GATE(CLK_I2C9, "i2c9", "aclk66_peric", GATE_BUS_PERIC1, 1, 0, 0),
-	GATE(CLK_I2C10, "i2c10", "aclk66_peric", GATE_BUS_PERIC1, 2, 0, 0),
+	/* PERIC Block */
+	GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_IP_PERIC, 0, 0, 0),
+	GATE(CLK_UART1, "uart1", "aclk66_peric", GATE_IP_PERIC, 1, 0, 0),
+	GATE(CLK_UART2, "uart2", "aclk66_peric", GATE_IP_PERIC, 2, 0, 0),
+	GATE(CLK_UART3, "uart3", "aclk66_peric", GATE_IP_PERIC, 3, 0, 0),
+	GATE(CLK_I2C0, "i2c0", "aclk66_peric", GATE_IP_PERIC, 6, 0, 0),
+	GATE(CLK_I2C1, "i2c1", "aclk66_peric", GATE_IP_PERIC, 7, 0, 0),
+	GATE(CLK_I2C2, "i2c2", "aclk66_peric", GATE_IP_PERIC, 8, 0, 0),
+	GATE(CLK_I2C3, "i2c3", "aclk66_peric", GATE_IP_PERIC, 9, 0, 0),
+	GATE(CLK_USI0, "usi0", "aclk66_peric", GATE_IP_PERIC, 10, 0, 0),
+	GATE(CLK_USI1, "usi1", "aclk66_peric", GATE_IP_PERIC, 11, 0, 0),
+	GATE(CLK_USI2, "usi2", "aclk66_peric", GATE_IP_PERIC, 12, 0, 0),
+	GATE(CLK_USI3, "usi3", "aclk66_peric", GATE_IP_PERIC, 13, 0, 0),
+	GATE(CLK_I2C_HDMI, "i2c_hdmi", "aclk66_peric", GATE_IP_PERIC, 14, 0, 0),
+	GATE(CLK_TSADC, "tsadc", "aclk66_peric", GATE_IP_PERIC, 15, 0, 0),
+	GATE(CLK_SPI0, "spi0", "aclk66_peric", GATE_IP_PERIC, 16, 0, 0),
+	GATE(CLK_SPI1, "spi1", "aclk66_peric", GATE_IP_PERIC, 17, 0, 0),
+	GATE(CLK_SPI2, "spi2", "aclk66_peric", GATE_IP_PERIC, 18, 0, 0),
+	GATE(CLK_I2S1, "i2s1", "aclk66_peric", GATE_IP_PERIC, 20, 0, 0),
+	GATE(CLK_I2S2, "i2s2", "aclk66_peric", GATE_IP_PERIC, 21, 0, 0),
+	GATE(CLK_PCM1, "pcm1", "aclk66_peric", GATE_IP_PERIC, 22, 0, 0),
+	GATE(CLK_PCM2, "pcm2", "aclk66_peric", GATE_IP_PERIC, 23, 0, 0),
+	GATE(CLK_PWM, "pwm", "aclk66_peric", GATE_IP_PERIC, 24, 0, 0),
+	GATE(CLK_SPDIF, "spdif", "aclk66_peric", GATE_IP_PERIC, 26, 0, 0),
+	GATE(CLK_USI4, "usi4", "aclk66_peric", GATE_IP_PERIC, 28, 0, 0),
+	GATE(CLK_USI5, "usi5", "aclk66_peric", GATE_IP_PERIC, 30, 0, 0),
+	GATE(CLK_USI6, "usi6", "aclk66_peric", GATE_IP_PERIC, 31, 0, 0),
 
+	GATE(CLK_KEYIF, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0),
+
+	/* PERIS Block */
 	GATE(CLK_CHIPID, "chipid", "aclk66_psgen",
-			GATE_BUS_PERIS0, 12, CLK_IGNORE_UNUSED, 0),
+			GATE_IP_PERIS, 0, CLK_IGNORE_UNUSED, 0),
 	GATE(CLK_SYSREG, "sysreg", "aclk66_psgen",
-			GATE_BUS_PERIS0, 13, CLK_IGNORE_UNUSED, 0),
-	GATE(CLK_TZPC0, "tzpc0", "aclk66_psgen", GATE_BUS_PERIS0, 18, 0, 0),
-	GATE(CLK_TZPC1, "tzpc1", "aclk66_psgen", GATE_BUS_PERIS0, 19, 0, 0),
-	GATE(CLK_TZPC2, "tzpc2", "aclk66_psgen", GATE_BUS_PERIS0, 20, 0, 0),
-	GATE(CLK_TZPC3, "tzpc3", "aclk66_psgen", GATE_BUS_PERIS0, 21, 0, 0),
-	GATE(CLK_TZPC4, "tzpc4", "aclk66_psgen", GATE_BUS_PERIS0, 22, 0, 0),
-	GATE(CLK_TZPC5, "tzpc5", "aclk66_psgen", GATE_BUS_PERIS0, 23, 0, 0),
-	GATE(CLK_TZPC6, "tzpc6", "aclk66_psgen", GATE_BUS_PERIS0, 24, 0, 0),
-	GATE(CLK_TZPC7, "tzpc7", "aclk66_psgen", GATE_BUS_PERIS0, 25, 0, 0),
-	GATE(CLK_TZPC8, "tzpc8", "aclk66_psgen", GATE_BUS_PERIS0, 26, 0, 0),
-	GATE(CLK_TZPC9, "tzpc9", "aclk66_psgen", GATE_BUS_PERIS0, 27, 0, 0),
-
-	GATE(CLK_HDMI_CEC, "hdmi_cec", "aclk66_psgen", GATE_BUS_PERIS1, 0, 0,
-		0),
+			GATE_IP_PERIS, 1, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC0, "tzpc0", "aclk66_psgen", GATE_IP_PERIS, 6, 0, 0),
+	GATE(CLK_TZPC1, "tzpc1", "aclk66_psgen", GATE_IP_PERIS, 7, 0, 0),
+	GATE(CLK_TZPC2, "tzpc2", "aclk66_psgen", GATE_IP_PERIS, 8, 0, 0),
+	GATE(CLK_TZPC3, "tzpc3", "aclk66_psgen", GATE_IP_PERIS, 9, 0, 0),
+	GATE(CLK_TZPC4, "tzpc4", "aclk66_psgen", GATE_IP_PERIS, 10, 0, 0),
+	GATE(CLK_TZPC5, "tzpc5", "aclk66_psgen", GATE_IP_PERIS, 11, 0, 0),
+	GATE(CLK_TZPC6, "tzpc6", "aclk66_psgen", GATE_IP_PERIS, 12, 0, 0),
+	GATE(CLK_TZPC7, "tzpc7", "aclk66_psgen", GATE_IP_PERIS, 13, 0, 0),
+	GATE(CLK_TZPC8, "tzpc8", "aclk66_psgen", GATE_IP_PERIS, 14, 0, 0),
+	GATE(CLK_TZPC9, "tzpc9", "aclk66_psgen", GATE_IP_PERIS, 15, 0, 0),
+	GATE(CLK_HDMI_CEC, "hdmi_cec", "aclk66_psgen", GATE_IP_PERIS, 16, 0, 0),
+	GATE(CLK_MCT, "mct", "aclk66_psgen", GATE_IP_PERIS, 18, 0, 0),
+	GATE(CLK_WDT, "wdt", "aclk66_psgen", GATE_IP_PERIS, 19, 0, 0),
+	GATE(CLK_RTC, "rtc", "aclk66_psgen", GATE_IP_PERIS, 20, 0, 0),
+	GATE(CLK_TMU, "tmu", "aclk66_psgen", GATE_IP_PERIS, 21, 0, 0),
+	GATE(CLK_TMU_GPU, "tmu_gpu", "aclk66_psgen", GATE_IP_PERIS, 22, 0, 0),
+
 	GATE(CLK_SECKEY, "seckey", "aclk66_psgen", GATE_BUS_PERIS1, 1, 0, 0),
-	GATE(CLK_WDT, "wdt", "aclk66_psgen", GATE_BUS_PERIS1, 3, 0, 0),
-	GATE(CLK_RTC, "rtc", "aclk66_psgen", GATE_BUS_PERIS1, 4, 0, 0),
-	GATE(CLK_TMU, "tmu", "aclk66_psgen", GATE_BUS_PERIS1, 5, 0, 0),
-	GATE(CLK_TMU_GPU, "tmu_gpu", "aclk66_psgen", GATE_BUS_PERIS1, 6, 0, 0),
+
+	/* GEN Block */
+	GATE(CLK_ROTATOR, "rotator", "mout_user_aclk266", GATE_IP_GEN, 1, 0, 0),
+	GATE(CLK_JPEG, "jpeg", "aclk300_jpeg", GATE_IP_GEN, 2, 0, 0),
+	GATE(CLK_JPEG2, "jpeg2", "aclk300_jpeg", GATE_IP_GEN, 3, 0, 0),
+	GATE(CLK_MDMA1, "mdma1", "mout_user_aclk266", GATE_IP_GEN, 4, 0, 0),
+	GATE(CLK_TOP_RTC, "top_rtc", "aclk66_psgen", GATE_IP_GEN, 5, 0, 0),
+	GATE(CLK_SMMU_ROTATOR, "smmu_rotator", "dout_gen_blk",
+			GATE_IP_GEN, 6, 0, 0),
+	GATE(CLK_SMMU_JPEG, "smmu_jpeg", "dout_jpg_blk", GATE_IP_GEN, 7, 0, 0),
+	GATE(CLK_SMMU_MDMA1, "smmu_mdma1", "dout_gen_blk",
+			GATE_IP_GEN, 9, 0, 0),
+
+	/* GATE_IP_GEN doesn't list gates for smmu_jpeg2 and mc */
+	GATE(CLK_SMMU_JPEG2, "smmu_jpeg2", "dout_jpg_blk",
+			GATE_BUS_GEN, 28, 0, 0),
+	GATE(CLK_MC, "mc", "aclk66_psgen", GATE_BUS_GEN, 12, 0, 0),
+
+	/* GSCL Block */
+	GATE(CLK_SCLK_GSCL_WA, "sclk_gscl_wa", "mout_user_aclk333_432_gscl",
+			GATE_TOP_SCLK_GSCL, 6, 0, 0),
+	GATE(CLK_SCLK_GSCL_WB, "sclk_gscl_wb", "mout_user_aclk333_432_gscl",
+			GATE_TOP_SCLK_GSCL, 7, 0, 0),
 
 	GATE(CLK_GSCL0, "gscl0", "aclk300_gscl", GATE_IP_GSCL0, 0, 0, 0),
 	GATE(CLK_GSCL1, "gscl1", "aclk300_gscl", GATE_IP_GSCL0, 1, 0, 0),
-	GATE(CLK_CLK_3AA, "clk_3aa", "aclk300_gscl", GATE_IP_GSCL0, 4, 0, 0),
-
-	GATE(CLK_SMMU_3AA, "smmu_3aa", "aclk333_432_gscl", GATE_IP_GSCL1, 2, 0,
-		0),
-	GATE(CLK_SMMU_FIMCL0, "smmu_fimcl0", "aclk333_432_gscl",
+	GATE(CLK_FIMC_3AA, "fimc_3aa", "aclk333_432_gscl",
+			GATE_IP_GSCL0, 4, 0, 0),
+	GATE(CLK_FIMC_LITE0, "fimc_lite0", "aclk333_432_gscl",
+			GATE_IP_GSCL0, 5, 0, 0),
+	GATE(CLK_FIMC_LITE1, "fimc_lite1", "aclk333_432_gscl",
+			GATE_IP_GSCL0, 6, 0, 0),
+
+	GATE(CLK_SMMU_3AA, "smmu_3aa", "dout_gscl_blk_333",
+			GATE_IP_GSCL1, 2, 0, 0),
+	GATE(CLK_SMMU_FIMCL0, "smmu_fimcl0", "dout_gscl_blk_333",
 			GATE_IP_GSCL1, 3, 0, 0),
-	GATE(CLK_SMMU_FIMCL1, "smmu_fimcl1", "aclk333_432_gscl",
+	GATE(CLK_SMMU_FIMCL1, "smmu_fimcl1", "dout_gscl_blk_333",
 			GATE_IP_GSCL1, 4, 0, 0),
-	GATE(CLK_SMMU_GSCL0, "smmu_gscl0", "aclk300_gscl", GATE_IP_GSCL1, 6, 0,
-		0),
-	GATE(CLK_SMMU_GSCL1, "smmu_gscl1", "aclk300_gscl", GATE_IP_GSCL1, 7, 0,
-		0),
-	GATE(CLK_GSCL_WA, "gscl_wa", "aclk300_gscl", GATE_IP_GSCL1, 12, 0, 0),
-	GATE(CLK_GSCL_WB, "gscl_wb", "aclk300_gscl", GATE_IP_GSCL1, 13, 0, 0),
-	GATE(CLK_SMMU_FIMCL3, "smmu_fimcl3,", "aclk333_432_gscl",
+	GATE(CLK_SMMU_GSCL0, "smmu_gscl0", "dout_gscl_blk_300",
+			GATE_IP_GSCL1, 6, 0, 0),
+	GATE(CLK_SMMU_GSCL1, "smmu_gscl1", "dout_gscl_blk_300",
+			GATE_IP_GSCL1, 7, 0, 0),
+	GATE(CLK_GSCL_WA, "gscl_wa", "sclk_gscl_wa", GATE_IP_GSCL1, 12, 0, 0),
+	GATE(CLK_GSCL_WB, "gscl_wb", "sclk_gscl_wb", GATE_IP_GSCL1, 13, 0, 0),
+	GATE(CLK_SMMU_FIMCL3, "smmu_fimcl3,", "dout_gscl_blk_333",
 			GATE_IP_GSCL1, 16, 0, 0),
 	GATE(CLK_FIMC_LITE3, "fimc_lite3", "aclk333_432_gscl",
 			GATE_IP_GSCL1, 17, 0, 0),
 
+	/* MSCL Block */
+	GATE(CLK_MSCL0, "mscl0", "aclk400_mscl", GATE_IP_MSCL, 0, 0, 0),
+	GATE(CLK_MSCL1, "mscl1", "aclk400_mscl", GATE_IP_MSCL, 1, 0, 0),
+	GATE(CLK_MSCL2, "mscl2", "aclk400_mscl", GATE_IP_MSCL, 2, 0, 0),
+	GATE(CLK_SMMU_MSCL0, "smmu_mscl0", "dout_mscl_blk",
+			GATE_IP_MSCL, 8, 0, 0),
+	GATE(CLK_SMMU_MSCL1, "smmu_mscl1", "dout_mscl_blk",
+			GATE_IP_MSCL, 9, 0, 0),
+	GATE(CLK_SMMU_MSCL2, "smmu_mscl2", "dout_mscl_blk",
+			GATE_IP_MSCL, 10, 0, 0),
+
 	GATE(CLK_FIMD1, "fimd1", "aclk300_disp1", GATE_IP_DISP1, 0, 0, 0),
 	GATE(CLK_DSIM1, "dsim1", "aclk200_disp1", GATE_IP_DISP1, 3, 0, 0),
 	GATE(CLK_DP1, "dp1", "aclk200_disp1", GATE_IP_DISP1, 4, 0, 0),
-	GATE(CLK_MIXER, "mixer", "aclk166", GATE_IP_DISP1, 5, 0, 0),
+	GATE(CLK_MIXER, "mixer", "aclk200_disp1", GATE_IP_DISP1, 5, 0, 0),
 	GATE(CLK_HDMI, "hdmi", "aclk200_disp1", GATE_IP_DISP1, 6, 0, 0),
-	GATE(CLK_SMMU_FIMD1, "smmu_fimd1", "aclk300_disp1", GATE_IP_DISP1, 8, 0,
-		0),
+	GATE(CLK_SMMU_FIMD1M0, "smmu_fimd1m0", "dout_disp1_blk",
+			GATE_IP_DISP1, 7, 0, 0),
+	GATE(CLK_SMMU_FIMD1M1, "smmu_fimd1m1", "dout_disp1_blk",
+			GATE_IP_DISP1, 8, 0, 0),
+	GATE(CLK_SMMU_MIXER, "smmu_mixer", "aclk200_disp1",
+			GATE_IP_DISP1, 9, 0, 0),
+
+	/* ISP */
+	GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "dout_uart_isp",
+			GATE_TOP_SCLK_ISP, 0, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "dout_spi0_isp_pre",
+			GATE_TOP_SCLK_ISP, 1, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "dout_spi1_isp_pre",
+			GATE_TOP_SCLK_ISP, 2, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_PWM_ISP, "sclk_pwm_isp", "dout_pwm_isp",
+			GATE_TOP_SCLK_ISP, 3, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_ISP_SENSOR0, "sclk_isp_sensor0", "dout_isp_sensor0",
+			GATE_TOP_SCLK_ISP, 4, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_ISP_SENSOR1, "sclk_isp_sensor1", "dout_isp_sensor1",
+			GATE_TOP_SCLK_ISP, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_ISP_SENSOR2, "sclk_isp_sensor2", "dout_isp_sensor2",
+			GATE_TOP_SCLK_ISP, 12, CLK_SET_RATE_PARENT, 0),
 
 	GATE(CLK_MFC, "mfc", "aclk333", GATE_IP_MFC, 0, 0, 0),
-	GATE(CLK_SMMU_MFCL, "smmu_mfcl", "aclk333", GATE_IP_MFC, 1, 0, 0),
-	GATE(CLK_SMMU_MFCR, "smmu_mfcr", "aclk333", GATE_IP_MFC, 2, 0, 0),
-
-	GATE(CLK_G3D, "g3d", "aclkg3d", GATE_IP_G3D, 9, 0, 0),
+	GATE(CLK_SMMU_MFCL, "smmu_mfcl", "dout_mfc_blk", GATE_IP_MFC, 1, 0, 0),
+	GATE(CLK_SMMU_MFCR, "smmu_mfcr", "dout_mfc_blk", GATE_IP_MFC, 2, 0, 0),
 
-	GATE(CLK_ROTATOR, "rotator", "aclk266", GATE_IP_GEN, 1, 0, 0),
-	GATE(CLK_JPEG, "jpeg", "aclk300_jpeg", GATE_IP_GEN, 2, 0, 0),
-	GATE(CLK_JPEG2, "jpeg2", "aclk300_jpeg", GATE_IP_GEN, 3, 0, 0),
-	GATE(CLK_MDMA1, "mdma1", "aclk266", GATE_IP_GEN, 4, 0, 0),
-	GATE(CLK_SMMU_ROTATOR, "smmu_rotator", "aclk266", GATE_IP_GEN, 6, 0, 0),
-	GATE(CLK_SMMU_JPEG, "smmu_jpeg", "aclk300_jpeg", GATE_IP_GEN, 7, 0, 0),
-	GATE(CLK_SMMU_MDMA1, "smmu_mdma1", "aclk266", GATE_IP_GEN, 9, 0, 0),
-
-	GATE(CLK_MSCL0, "mscl0", "aclk400_mscl", GATE_IP_MSCL, 0, 0, 0),
-	GATE(CLK_MSCL1, "mscl1", "aclk400_mscl", GATE_IP_MSCL, 1, 0, 0),
-	GATE(CLK_MSCL2, "mscl2", "aclk400_mscl", GATE_IP_MSCL, 2, 0, 0),
-	GATE(CLK_SMMU_MSCL0, "smmu_mscl0", "aclk400_mscl", GATE_IP_MSCL, 8, 0,
-		0),
-	GATE(CLK_SMMU_MSCL1, "smmu_mscl1", "aclk400_mscl", GATE_IP_MSCL, 9, 0,
-		0),
-	GATE(CLK_SMMU_MSCL2, "smmu_mscl2", "aclk400_mscl", GATE_IP_MSCL, 10, 0,
-		0),
-	GATE(CLK_SMMU_MIXER, "smmu_mixer", "aclk200_disp1", GATE_IP_DISP1, 9, 0,
-		0),
+	GATE(CLK_G3D, "g3d", "mout_user_aclk_g3d", GATE_IP_G3D, 9, 0, 0),
 };
 
-static struct samsung_pll_clock exynos5420_plls[nr_plls] __initdata = {
+static struct samsung_pll_clock exynos5x_plls[nr_plls] __initdata = {
 	[apll] = PLL(pll_2550, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK,
 		APLL_CON0, NULL),
 	[cpll] = PLL(pll_2550, CLK_FOUT_CPLL, "fout_cpll", "fin_pll", CPLL_LOCK,
@@ -776,8 +1173,11 @@ static struct of_device_id ext_clk_match[] __initdata = {
 };
 
 /* register exynos5420 clocks */
-static void __init exynos5420_clk_init(struct device_node *np)
+static void __init exynos5x_clk_init(struct device_node *np,
+		enum exynos5x_soc soc)
 {
+	struct samsung_clk_provider *ctx;
+
 	if (np) {
 		reg_base = of_iomap(np, 0);
 		if (!reg_base)
@@ -786,23 +1186,56 @@ static void __init exynos5420_clk_init(struct device_node *np)
 		panic("%s: unable to determine soc\n", __func__);
 	}
 
-	samsung_clk_init(np, reg_base, CLK_NR_CLKS);
-	samsung_clk_of_register_fixed_ext(exynos5420_fixed_rate_ext_clks,
-			ARRAY_SIZE(exynos5420_fixed_rate_ext_clks),
+	exynos5x_soc = soc;
+
+	ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
+
+	samsung_clk_of_register_fixed_ext(ctx, exynos5x_fixed_rate_ext_clks,
+			ARRAY_SIZE(exynos5x_fixed_rate_ext_clks),
 			ext_clk_match);
-	samsung_clk_register_pll(exynos5420_plls, ARRAY_SIZE(exynos5420_plls),
+	samsung_clk_register_pll(ctx, exynos5x_plls, ARRAY_SIZE(exynos5x_plls),
 					reg_base);
-	samsung_clk_register_fixed_rate(exynos5420_fixed_rate_clks,
-			ARRAY_SIZE(exynos5420_fixed_rate_clks));
-	samsung_clk_register_fixed_factor(exynos5420_fixed_factor_clks,
-			ARRAY_SIZE(exynos5420_fixed_factor_clks));
-	samsung_clk_register_mux(exynos5420_mux_clks,
-			ARRAY_SIZE(exynos5420_mux_clks));
-	samsung_clk_register_div(exynos5420_div_clks,
-			ARRAY_SIZE(exynos5420_div_clks));
-	samsung_clk_register_gate(exynos5420_gate_clks,
-			ARRAY_SIZE(exynos5420_gate_clks));
+	samsung_clk_register_fixed_rate(ctx, exynos5x_fixed_rate_clks,
+			ARRAY_SIZE(exynos5x_fixed_rate_clks));
+	samsung_clk_register_fixed_factor(ctx, exynos5x_fixed_factor_clks,
+			ARRAY_SIZE(exynos5x_fixed_factor_clks));
+	samsung_clk_register_mux(ctx, exynos5x_mux_clks,
+			ARRAY_SIZE(exynos5x_mux_clks));
+	samsung_clk_register_div(ctx, exynos5x_div_clks,
+			ARRAY_SIZE(exynos5x_div_clks));
+	samsung_clk_register_gate(ctx, exynos5x_gate_clks,
+			ARRAY_SIZE(exynos5x_gate_clks));
+
+	if (soc == EXYNOS5420) {
+		samsung_clk_register_mux(ctx, exynos5420_mux_clks,
+				ARRAY_SIZE(exynos5420_mux_clks));
+		samsung_clk_register_div(ctx, exynos5420_div_clks,
+				ARRAY_SIZE(exynos5420_div_clks));
+	} else {
+		samsung_clk_register_fixed_factor(
+				ctx, exynos5800_fixed_factor_clks,
+				ARRAY_SIZE(exynos5800_fixed_factor_clks));
+		samsung_clk_register_mux(ctx, exynos5800_mux_clks,
+				ARRAY_SIZE(exynos5800_mux_clks));
+		samsung_clk_register_div(ctx, exynos5800_div_clks,
+				ARRAY_SIZE(exynos5800_div_clks));
+		samsung_clk_register_gate(ctx, exynos5800_gate_clks,
+				ARRAY_SIZE(exynos5800_gate_clks));
+	}
 
 	exynos5420_clk_sleep_init();
 }
+
+static void __init exynos5420_clk_init(struct device_node *np)
+{
+	exynos5x_clk_init(np, EXYNOS5420);
+}
 CLK_OF_DECLARE(exynos5420_clk, "samsung,exynos5420-clock", exynos5420_clk_init);
+
+static void __init exynos5800_clk_init(struct device_node *np)
+{
+	exynos5x_clk_init(np, EXYNOS5800);
+}
+CLK_OF_DECLARE(exynos5800_clk, "samsung,exynos5800-clock", exynos5800_clk_init);

drivers/clk/samsung/clk-exynos5440.c

@@ -93,6 +93,7 @@ static struct of_device_id ext_clk_match[] __initdata = {
 static void __init exynos5440_clk_init(struct device_node *np)
 {
 	void __iomem *reg_base;
+	struct samsung_clk_provider *ctx;
 
 	reg_base = of_iomap(np, 0);
 	if (!reg_base) {
@@ -101,22 +102,25 @@ static void __init exynos5440_clk_init(struct device_node *np)
 		return;
 	}
 
-	samsung_clk_init(np, reg_base, CLK_NR_CLKS);
-	samsung_clk_of_register_fixed_ext(exynos5440_fixed_rate_ext_clks,
+	ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
+
+	samsung_clk_of_register_fixed_ext(ctx, exynos5440_fixed_rate_ext_clks,
 		ARRAY_SIZE(exynos5440_fixed_rate_ext_clks), ext_clk_match);
 
 	samsung_clk_register_pll2550x("cplla", "xtal", reg_base + 0x1c, 0x10);
 	samsung_clk_register_pll2550x("cpllb", "xtal", reg_base + 0x20, 0x10);
 
-	samsung_clk_register_fixed_rate(exynos5440_fixed_rate_clks,
+	samsung_clk_register_fixed_rate(ctx, exynos5440_fixed_rate_clks,
 			ARRAY_SIZE(exynos5440_fixed_rate_clks));
-	samsung_clk_register_fixed_factor(exynos5440_fixed_factor_clks,
+	samsung_clk_register_fixed_factor(ctx, exynos5440_fixed_factor_clks,
 			ARRAY_SIZE(exynos5440_fixed_factor_clks));
-	samsung_clk_register_mux(exynos5440_mux_clks,
+	samsung_clk_register_mux(ctx, exynos5440_mux_clks,
 			ARRAY_SIZE(exynos5440_mux_clks));
-	samsung_clk_register_div(exynos5440_div_clks,
+	samsung_clk_register_div(ctx, exynos5440_div_clks,
 			ARRAY_SIZE(exynos5440_div_clks));
-	samsung_clk_register_gate(exynos5440_gate_clks,
+	samsung_clk_register_gate(ctx, exynos5440_gate_clks,
 			ARRAY_SIZE(exynos5440_gate_clks));
 
 	pr_info("Exynos5440: arm_clk = %ldHz\n", _get_rate("arm_clk"));

drivers/clk/samsung/clk-pll.c

@@ -11,6 +11,7 @@
 
 #include <linux/errno.h>
 #include <linux/hrtimer.h>
+#include <linux/delay.h>
 #include "clk.h"
 #include "clk-pll.h"
 
@@ -58,6 +59,72 @@ static long samsung_pll_round_rate(struct clk_hw *hw,
 	return rate_table[i - 1].rate;
 }
 
+/*
+ * PLL2126 Clock Type
+ */
+
+#define PLL2126_MDIV_MASK	(0xff)
+#define PLL2126_PDIV_MASK	(0x3f)
+#define PLL2126_SDIV_MASK	(0x3)
+#define PLL2126_MDIV_SHIFT	(16)
+#define PLL2126_PDIV_SHIFT	(8)
+#define PLL2126_SDIV_SHIFT	(0)
+
+static unsigned long samsung_pll2126_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 pll_con, mdiv, pdiv, sdiv;
+	u64 fvco = parent_rate;
+
+	pll_con = __raw_readl(pll->con_reg);
+	mdiv = (pll_con >> PLL2126_MDIV_SHIFT) & PLL2126_MDIV_MASK;
+	pdiv = (pll_con >> PLL2126_PDIV_SHIFT) & PLL2126_PDIV_MASK;
+	sdiv = (pll_con >> PLL2126_SDIV_SHIFT) & PLL2126_SDIV_MASK;
+
+	fvco *= (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll2126_clk_ops = {
+	.recalc_rate = samsung_pll2126_recalc_rate,
+};
+
+/*
+ * PLL3000 Clock Type
+ */
+
+#define PLL3000_MDIV_MASK	(0xff)
+#define PLL3000_PDIV_MASK	(0x3)
+#define PLL3000_SDIV_MASK	(0x3)
+#define PLL3000_MDIV_SHIFT	(16)
+#define PLL3000_PDIV_SHIFT	(8)
+#define PLL3000_SDIV_SHIFT	(0)
+
+static unsigned long samsung_pll3000_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 pll_con, mdiv, pdiv, sdiv;
+	u64 fvco = parent_rate;
+
+	pll_con = __raw_readl(pll->con_reg);
+	mdiv = (pll_con >> PLL3000_MDIV_SHIFT) & PLL3000_MDIV_MASK;
+	pdiv = (pll_con >> PLL3000_PDIV_SHIFT) & PLL3000_PDIV_MASK;
+	sdiv = (pll_con >> PLL3000_SDIV_SHIFT) & PLL3000_SDIV_MASK;
+
+	fvco *= (2 * (mdiv + 8));
+	do_div(fvco, pdiv << sdiv);
+
+	return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll3000_clk_ops = {
+	.recalc_rate = samsung_pll3000_recalc_rate,
+};
+
 /*
  * PLL35xx Clock Type
  */
@@ -564,7 +631,9 @@ static const struct clk_ops samsung_pll46xx_clk_min_ops = {
 #define PLL6552_PDIV_MASK	0x3f
 #define PLL6552_SDIV_MASK	0x7
 #define PLL6552_MDIV_SHIFT	16
+#define PLL6552_MDIV_SHIFT_2416	14
 #define PLL6552_PDIV_SHIFT	8
+#define PLL6552_PDIV_SHIFT_2416	5
 #define PLL6552_SDIV_SHIFT	0
 
 static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw,
@@ -575,8 +644,13 @@ static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw,
 	u64 fvco = parent_rate;
 
 	pll_con = __raw_readl(pll->con_reg);
-	mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK;
-	pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK;
+	if (pll->type == pll_6552_s3c2416) {
+		mdiv = (pll_con >> PLL6552_MDIV_SHIFT_2416) & PLL6552_MDIV_MASK;
+		pdiv = (pll_con >> PLL6552_PDIV_SHIFT_2416) & PLL6552_PDIV_MASK;
+	} else {
+		mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK;
+		pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK;
+	}
 	sdiv = (pll_con >> PLL6552_SDIV_SHIFT) & PLL6552_SDIV_MASK;
 
 	fvco *= mdiv;
@@ -627,6 +701,169 @@ static const struct clk_ops samsung_pll6553_clk_ops = {
 	.recalc_rate = samsung_pll6553_recalc_rate,
 };
 
+/*
+ * PLL Clock Type of S3C24XX before S3C2443
+ */
+
+#define PLLS3C2410_MDIV_MASK		(0xff)
+#define PLLS3C2410_PDIV_MASK		(0x1f)
+#define PLLS3C2410_SDIV_MASK		(0x3)
+#define PLLS3C2410_MDIV_SHIFT		(12)
+#define PLLS3C2410_PDIV_SHIFT		(4)
+#define PLLS3C2410_SDIV_SHIFT		(0)
+
+#define PLLS3C2410_ENABLE_REG_OFFSET	0x10
+
+static unsigned long samsung_s3c2410_pll_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 pll_con, mdiv, pdiv, sdiv;
+	u64 fvco = parent_rate;
+
+	pll_con = __raw_readl(pll->con_reg);
+	mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK;
+	pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK;
+	sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK;
+
+	fvco *= (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+static unsigned long samsung_s3c2440_mpll_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 pll_con, mdiv, pdiv, sdiv;
+	u64 fvco = parent_rate;
+
+	pll_con = __raw_readl(pll->con_reg);
+	mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK;
+	pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK;
+	sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK;
+
+	fvco *= (2 * (mdiv + 8));
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+static int samsung_s3c2410_pll_set_rate(struct clk_hw *hw, unsigned long drate,
+					unsigned long prate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	const struct samsung_pll_rate_table *rate;
+	u32 tmp;
+
+	/* Get required rate settings from table */
+	rate = samsung_get_pll_settings(pll, drate);
+	if (!rate) {
+		pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+			drate, __clk_get_name(hw->clk));
+		return -EINVAL;
+	}
+
+	tmp = __raw_readl(pll->con_reg);
+
+	/* Change PLL PMS values */
+	tmp &= ~((PLLS3C2410_MDIV_MASK << PLLS3C2410_MDIV_SHIFT) |
+			(PLLS3C2410_PDIV_MASK << PLLS3C2410_PDIV_SHIFT) |
+			(PLLS3C2410_SDIV_MASK << PLLS3C2410_SDIV_SHIFT));
+	tmp |= (rate->mdiv << PLLS3C2410_MDIV_SHIFT) |
+			(rate->pdiv << PLLS3C2410_PDIV_SHIFT) |
+			(rate->sdiv << PLLS3C2410_SDIV_SHIFT);
+	__raw_writel(tmp, pll->con_reg);
+
+	/* Time to settle according to the manual */
+	udelay(300);
+
+	return 0;
+}
+
+static int samsung_s3c2410_pll_enable(struct clk_hw *hw, int bit, bool enable)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 pll_en = __raw_readl(pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET);
+	u32 pll_en_orig = pll_en;
+
+	if (enable)
+		pll_en &= ~BIT(bit);
+	else
+		pll_en |= BIT(bit);
+
+	__raw_writel(pll_en, pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET);
+
+	/* if we started the UPLL, then allow to settle */
+	if (enable && (pll_en_orig & BIT(bit)))
+		udelay(300);
+
+	return 0;
+}
+
+static int samsung_s3c2410_mpll_enable(struct clk_hw *hw)
+{
+	return samsung_s3c2410_pll_enable(hw, 5, true);
+}
+
+static void samsung_s3c2410_mpll_disable(struct clk_hw *hw)
+{
+	samsung_s3c2410_pll_enable(hw, 5, false);
+}
+
+static int samsung_s3c2410_upll_enable(struct clk_hw *hw)
+{
+	return samsung_s3c2410_pll_enable(hw, 7, true);
+}
+
+static void samsung_s3c2410_upll_disable(struct clk_hw *hw)
+{
+	samsung_s3c2410_pll_enable(hw, 7, false);
+}
+
+static const struct clk_ops samsung_s3c2410_mpll_clk_min_ops = {
+	.recalc_rate = samsung_s3c2410_pll_recalc_rate,
+	.enable = samsung_s3c2410_mpll_enable,
+	.disable = samsung_s3c2410_mpll_disable,
+};
+
+static const struct clk_ops samsung_s3c2410_upll_clk_min_ops = {
+	.recalc_rate = samsung_s3c2410_pll_recalc_rate,
+	.enable = samsung_s3c2410_upll_enable,
+	.disable = samsung_s3c2410_upll_disable,
+};
+
+static const struct clk_ops samsung_s3c2440_mpll_clk_min_ops = {
+	.recalc_rate = samsung_s3c2440_mpll_recalc_rate,
+	.enable = samsung_s3c2410_mpll_enable,
+	.disable = samsung_s3c2410_mpll_disable,
+};
+
+static const struct clk_ops samsung_s3c2410_mpll_clk_ops = {
+	.recalc_rate = samsung_s3c2410_pll_recalc_rate,
+	.enable = samsung_s3c2410_mpll_enable,
+	.disable = samsung_s3c2410_mpll_disable,
+	.round_rate = samsung_pll_round_rate,
+	.set_rate = samsung_s3c2410_pll_set_rate,
+};
+
+static const struct clk_ops samsung_s3c2410_upll_clk_ops = {
+	.recalc_rate = samsung_s3c2410_pll_recalc_rate,
+	.enable = samsung_s3c2410_upll_enable,
+	.disable = samsung_s3c2410_upll_disable,
+	.round_rate = samsung_pll_round_rate,
+	.set_rate = samsung_s3c2410_pll_set_rate,
+};
+
+static const struct clk_ops samsung_s3c2440_mpll_clk_ops = {
+	.recalc_rate = samsung_s3c2440_mpll_recalc_rate,
+	.enable = samsung_s3c2410_mpll_enable,
+	.disable = samsung_s3c2410_mpll_disable,
+	.round_rate = samsung_pll_round_rate,
+	.set_rate = samsung_s3c2410_pll_set_rate,
+};
+
 /*
  * PLL2550x Clock Type
  */
@@ -710,8 +947,206 @@ struct clk * __init samsung_clk_register_pll2550x(const char *name,
 	return clk;
 }
 
-static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
-						void __iomem *base)
+/*
+ * PLL2550xx Clock Type
+ */
+
+/* Maximum lock time can be 270 * PDIV cycles */
+#define PLL2550XX_LOCK_FACTOR 270
+
+#define PLL2550XX_M_MASK		0x3FF
+#define PLL2550XX_P_MASK		0x3F
+#define PLL2550XX_S_MASK		0x7
+#define PLL2550XX_LOCK_STAT_MASK	0x1
+#define PLL2550XX_M_SHIFT		9
+#define PLL2550XX_P_SHIFT		3
+#define PLL2550XX_S_SHIFT		0
+#define PLL2550XX_LOCK_STAT_SHIFT	21
+
+static unsigned long samsung_pll2550xx_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 mdiv, pdiv, sdiv, pll_con;
+	u64 fvco = parent_rate;
+
+	pll_con = __raw_readl(pll->con_reg);
+	mdiv = (pll_con >> PLL2550XX_M_SHIFT) & PLL2550XX_M_MASK;
+	pdiv = (pll_con >> PLL2550XX_P_SHIFT) & PLL2550XX_P_MASK;
+	sdiv = (pll_con >> PLL2550XX_S_SHIFT) & PLL2550XX_S_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+static inline bool samsung_pll2550xx_mp_change(u32 mdiv, u32 pdiv, u32 pll_con)
+{
+	u32 old_mdiv, old_pdiv;
+
+	old_mdiv = (pll_con >> PLL2550XX_M_SHIFT) & PLL2550XX_M_MASK;
+	old_pdiv = (pll_con >> PLL2550XX_P_SHIFT) & PLL2550XX_P_MASK;
+
+	return mdiv != old_mdiv || pdiv != old_pdiv;
+}
+
+static int samsung_pll2550xx_set_rate(struct clk_hw *hw, unsigned long drate,
+					unsigned long prate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	const struct samsung_pll_rate_table *rate;
+	u32 tmp;
+
+	/* Get required rate settings from table */
+	rate = samsung_get_pll_settings(pll, drate);
+	if (!rate) {
+		pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+			drate, __clk_get_name(hw->clk));
+		return -EINVAL;
+	}
+
+	tmp = __raw_readl(pll->con_reg);
+
+	if (!(samsung_pll2550xx_mp_change(rate->mdiv, rate->pdiv, tmp))) {
+		/* If only s change, change just s value only*/
+		tmp &= ~(PLL2550XX_S_MASK << PLL2550XX_S_SHIFT);
+		tmp |= rate->sdiv << PLL2550XX_S_SHIFT;
+		__raw_writel(tmp, pll->con_reg);
+
+		return 0;
+	}
+
+	/* Set PLL lock time. */
+	__raw_writel(rate->pdiv * PLL2550XX_LOCK_FACTOR, pll->lock_reg);
+
+	/* Change PLL PMS values */
+	tmp &= ~((PLL2550XX_M_MASK << PLL2550XX_M_SHIFT) |
+			(PLL2550XX_P_MASK << PLL2550XX_P_SHIFT) |
+			(PLL2550XX_S_MASK << PLL2550XX_S_SHIFT));
+	tmp |= (rate->mdiv << PLL2550XX_M_SHIFT) |
+			(rate->pdiv << PLL2550XX_P_SHIFT) |
+			(rate->sdiv << PLL2550XX_S_SHIFT);
+	__raw_writel(tmp, pll->con_reg);
+
+	/* wait_lock_time */
+	do {
+		cpu_relax();
+		tmp = __raw_readl(pll->con_reg);
+	} while (!(tmp & (PLL2550XX_LOCK_STAT_MASK
+			<< PLL2550XX_LOCK_STAT_SHIFT)));
+
+	return 0;
+}
+
+static const struct clk_ops samsung_pll2550xx_clk_ops = {
+	.recalc_rate = samsung_pll2550xx_recalc_rate,
+	.round_rate = samsung_pll_round_rate,
+	.set_rate = samsung_pll2550xx_set_rate,
+};
+
+static const struct clk_ops samsung_pll2550xx_clk_min_ops = {
+	.recalc_rate = samsung_pll2550xx_recalc_rate,
+};
+
+/*
+ * PLL2650XX Clock Type
+ */
+
+/* Maximum lock time can be 3000 * PDIV cycles */
+#define PLL2650XX_LOCK_FACTOR 3000
+
+#define PLL2650XX_MDIV_SHIFT		9
+#define PLL2650XX_PDIV_SHIFT		3
+#define PLL2650XX_SDIV_SHIFT		0
+#define PLL2650XX_KDIV_SHIFT		0
+#define PLL2650XX_MDIV_MASK		0x1ff
+#define PLL2650XX_PDIV_MASK		0x3f
+#define PLL2650XX_SDIV_MASK		0x7
+#define PLL2650XX_KDIV_MASK		0xffff
+#define PLL2650XX_PLL_ENABLE_SHIFT	23
+#define PLL2650XX_PLL_LOCKTIME_SHIFT	21
+#define PLL2650XX_PLL_FOUTMASK_SHIFT	31
+
+static unsigned long samsung_pll2650xx_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 mdiv, pdiv, sdiv, pll_con0, pll_con2;
+	s16 kdiv;
+	u64 fvco = parent_rate;
+
+	pll_con0 = __raw_readl(pll->con_reg);
+	pll_con2 = __raw_readl(pll->con_reg + 8);
+	mdiv = (pll_con0 >> PLL2650XX_MDIV_SHIFT) & PLL2650XX_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL2650XX_PDIV_SHIFT) & PLL2650XX_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL2650XX_SDIV_SHIFT) & PLL2650XX_SDIV_MASK;
+	kdiv = (s16)(pll_con2 & PLL2650XX_KDIV_MASK);
+
+	fvco *= (mdiv << 16) + kdiv;
+	do_div(fvco, (pdiv << sdiv));
+	fvco >>= 16;
+
+	return (unsigned long)fvco;
+}
+
+static int samsung_pll2650xx_set_rate(struct clk_hw *hw, unsigned long drate,
+					unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 tmp, pll_con0, pll_con2;
+	const struct samsung_pll_rate_table *rate;
+
+	rate = samsung_get_pll_settings(pll, drate);
+	if (!rate) {
+		pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+			drate, __clk_get_name(hw->clk));
+		return -EINVAL;
+	}
+
+	pll_con0 = __raw_readl(pll->con_reg);
+	pll_con2 = __raw_readl(pll->con_reg + 8);
+
+	 /* Change PLL PMS values */
+	pll_con0 &= ~(PLL2650XX_MDIV_MASK << PLL2650XX_MDIV_SHIFT |
+			PLL2650XX_PDIV_MASK << PLL2650XX_PDIV_SHIFT |
+			PLL2650XX_SDIV_MASK << PLL2650XX_SDIV_SHIFT);
+	pll_con0 |= rate->mdiv << PLL2650XX_MDIV_SHIFT;
+	pll_con0 |= rate->pdiv << PLL2650XX_PDIV_SHIFT;
+	pll_con0 |= rate->sdiv << PLL2650XX_SDIV_SHIFT;
+	pll_con0 |= 1 << PLL2650XX_PLL_ENABLE_SHIFT;
+	pll_con0 |= 1 << PLL2650XX_PLL_FOUTMASK_SHIFT;
+
+	pll_con2 &= ~(PLL2650XX_KDIV_MASK << PLL2650XX_KDIV_SHIFT);
+	pll_con2 |= ((~(rate->kdiv) + 1) & PLL2650XX_KDIV_MASK)
+			<< PLL2650XX_KDIV_SHIFT;
+
+	/* Set PLL lock time. */
+	__raw_writel(PLL2650XX_LOCK_FACTOR * rate->pdiv, pll->lock_reg);
+
+	__raw_writel(pll_con0, pll->con_reg);
+	__raw_writel(pll_con2, pll->con_reg + 8);
+
+	do {
+		tmp = __raw_readl(pll->con_reg);
+	} while (!(tmp & (0x1 << PLL2650XX_PLL_LOCKTIME_SHIFT)));
+
+	return 0;
+}
+
+static const struct clk_ops samsung_pll2650xx_clk_ops = {
+	.recalc_rate = samsung_pll2650xx_recalc_rate,
+	.set_rate = samsung_pll2650xx_set_rate,
+	.round_rate = samsung_pll_round_rate,
+};
+
+static const struct clk_ops samsung_pll2650xx_clk_min_ops = {
+	.recalc_rate = samsung_pll2650xx_recalc_rate,
+};
+
+static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
+				struct samsung_pll_clock *pll_clk,
+				void __iomem *base)
 {
 	struct samsung_clk_pll *pll;
 	struct clk *clk;
@@ -746,6 +1181,12 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
 	}
 
 	switch (pll_clk->type) {
+	case pll_2126:
+		init.ops = &samsung_pll2126_clk_ops;
+		break;
+	case pll_3000:
+		init.ops = &samsung_pll3000_clk_ops;
+		break;
 	/* clk_ops for 35xx and 2550 are similar */
 	case pll_35xx:
 	case pll_2550:
@@ -773,6 +1214,7 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
 			init.ops = &samsung_pll36xx_clk_ops;
 		break;
 	case pll_6552:
+	case pll_6552_s3c2416:
 		init.ops = &samsung_pll6552_clk_ops;
 		break;
 	case pll_6553:
@@ -786,6 +1228,36 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
 		else
 			init.ops = &samsung_pll46xx_clk_ops;
 		break;
+	case pll_s3c2410_mpll:
+		if (!pll->rate_table)
+			init.ops = &samsung_s3c2410_mpll_clk_min_ops;
+		else
+			init.ops = &samsung_s3c2410_mpll_clk_ops;
+		break;
+	case pll_s3c2410_upll:
+		if (!pll->rate_table)
+			init.ops = &samsung_s3c2410_upll_clk_min_ops;
+		else
+			init.ops = &samsung_s3c2410_upll_clk_ops;
+		break;
+	case pll_s3c2440_mpll:
+		if (!pll->rate_table)
+			init.ops = &samsung_s3c2440_mpll_clk_min_ops;
+		else
+			init.ops = &samsung_s3c2440_mpll_clk_ops;
+		break;
+	case pll_2550xx:
+		if (!pll->rate_table)
+			init.ops = &samsung_pll2550xx_clk_min_ops;
+		else
+			init.ops = &samsung_pll2550xx_clk_ops;
+		break;
+	case pll_2650xx:
+		if (!pll->rate_table)
+			init.ops = &samsung_pll2650xx_clk_min_ops;
+		else
+			init.ops = &samsung_pll2650xx_clk_ops;
+		break;
 	default:
 		pr_warn("%s: Unknown pll type for pll clk %s\n",
 			__func__, pll_clk->name);
@@ -804,7 +1276,7 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
 		return;
 	}
 
-	samsung_clk_add_lookup(clk, pll_clk->id);
+	samsung_clk_add_lookup(ctx, clk, pll_clk->id);
 
 	if (!pll_clk->alias)
 		return;
@@ -815,11 +1287,12 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
 			__func__, pll_clk->name, ret);
 }
 
-void __init samsung_clk_register_pll(struct samsung_pll_clock *pll_list,
-				unsigned int nr_pll, void __iomem *base)
+void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx,
+			struct samsung_pll_clock *pll_list,
+			unsigned int nr_pll, void __iomem *base)
 {
 	int cnt;
 
 	for (cnt = 0; cnt < nr_pll; cnt++)
-		_samsung_clk_register_pll(&pll_list[cnt], base);
+		_samsung_clk_register_pll(ctx, &pll_list[cnt], base);
 }

drivers/clk/samsung/clk-pll.h

@@ -13,6 +13,8 @@
 #define __SAMSUNG_CLK_PLL_H
 
 enum samsung_pll_type {
+	pll_2126,
+	pll_3000,
 	pll_35xx,
 	pll_36xx,
 	pll_2550,
@@ -24,7 +26,13 @@ enum samsung_pll_type {
 	pll_4650,
 	pll_4650c,
 	pll_6552,
+	pll_6552_s3c2416,
 	pll_6553,
+	pll_s3c2410_mpll,
+	pll_s3c2410_upll,
+	pll_s3c2440_mpll,
+	pll_2550xx,
+	pll_2650xx,
 };
 
 #define PLL_35XX_RATE(_rate, _m, _p, _s)			\

drivers/clk/samsung/clk-s3c2410-dclk.c

@@ -0,0 +1,440 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for s3c24xx external clock output.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include "clk.h"
+
+/* legacy access to misccr, until dt conversion is finished */
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#define MUX_DCLK0	0
+#define MUX_DCLK1	1
+#define DIV_DCLK0	2
+#define DIV_DCLK1	3
+#define GATE_DCLK0	4
+#define GATE_DCLK1	5
+#define MUX_CLKOUT0	6
+#define MUX_CLKOUT1	7
+#define DCLK_MAX_CLKS	(MUX_CLKOUT1 + 1)
+
+enum supported_socs {
+	S3C2410,
+	S3C2412,
+	S3C2440,
+	S3C2443,
+};
+
+struct s3c24xx_dclk_drv_data {
+	const char **clkout0_parent_names;
+	int clkout0_num_parents;
+	const char **clkout1_parent_names;
+	int clkout1_num_parents;
+	const char **mux_parent_names;
+	int mux_num_parents;
+};
+
+/*
+ * Clock for output-parent selection in misccr
+ */
+
+struct s3c24xx_clkout {
+	struct clk_hw		hw;
+	u32			mask;
+	u8			shift;
+};
+
+#define to_s3c24xx_clkout(_hw) container_of(_hw, struct s3c24xx_clkout, hw)
+
+static u8 s3c24xx_clkout_get_parent(struct clk_hw *hw)
+{
+	struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw);
+	int num_parents = __clk_get_num_parents(hw->clk);
+	u32 val;
+
+	val = readl_relaxed(S3C24XX_MISCCR) >> clkout->shift;
+	val >>= clkout->shift;
+	val &= clkout->mask;
+
+	if (val >= num_parents)
+		return -EINVAL;
+
+	return val;
+}
+
+static int s3c24xx_clkout_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw);
+	int ret = 0;
+
+	s3c2410_modify_misccr((clkout->mask << clkout->shift),
+			      (index << clkout->shift));
+
+	return ret;
+}
+
+const struct clk_ops s3c24xx_clkout_ops = {
+	.get_parent = s3c24xx_clkout_get_parent,
+	.set_parent = s3c24xx_clkout_set_parent,
+	.determine_rate = __clk_mux_determine_rate,
+};
+
+struct clk *s3c24xx_register_clkout(struct device *dev, const char *name,
+		const char **parent_names, u8 num_parents,
+		u8 shift, u32 mask)
+{
+	struct s3c24xx_clkout *clkout;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	/* allocate the clkout */
+	clkout = kzalloc(sizeof(*clkout), GFP_KERNEL);
+	if (!clkout)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &s3c24xx_clkout_ops;
+	init.flags = CLK_IS_BASIC;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
+	clkout->shift = shift;
+	clkout->mask = mask;
+	clkout->hw.init = &init;
+
+	clk = clk_register(dev, &clkout->hw);
+
+	return clk;
+}
+
+/*
+ * dclk and clkout init
+ */
+
+struct s3c24xx_dclk {
+	struct device *dev;
+	void __iomem *base;
+	struct clk_onecell_data clk_data;
+	struct notifier_block dclk0_div_change_nb;
+	struct notifier_block dclk1_div_change_nb;
+	spinlock_t dclk_lock;
+	unsigned long reg_save;
+};
+
+#define to_s3c24xx_dclk0(x) \
+		container_of(x, struct s3c24xx_dclk, dclk0_div_change_nb)
+
+#define to_s3c24xx_dclk1(x) \
+		container_of(x, struct s3c24xx_dclk, dclk1_div_change_nb)
+
+PNAME(dclk_s3c2410_p) = { "pclk", "uclk" };
+PNAME(clkout0_s3c2410_p) = { "mpll", "upll", "fclk", "hclk", "pclk",
+			     "gate_dclk0" };
+PNAME(clkout1_s3c2410_p) = { "mpll", "upll", "fclk", "hclk", "pclk",
+			     "gate_dclk1" };
+
+PNAME(clkout0_s3c2412_p) = { "mpll", "upll", "rtc_clkout",
+			     "hclk", "pclk", "gate_dclk0" };
+PNAME(clkout1_s3c2412_p) = { "xti", "upll", "fclk", "hclk", "pclk",
+			     "gate_dclk1" };
+
+PNAME(clkout0_s3c2440_p) = { "xti", "upll", "fclk", "hclk", "pclk",
+			     "gate_dclk0" };
+PNAME(clkout1_s3c2440_p) = { "mpll", "upll", "rtc_clkout",
+			     "hclk", "pclk", "gate_dclk1" };
+
+PNAME(dclk_s3c2443_p) = { "pclk", "epll" };
+PNAME(clkout0_s3c2443_p) = { "xti", "epll", "armclk", "hclk", "pclk",
+			     "gate_dclk0" };
+PNAME(clkout1_s3c2443_p) = { "dummy", "epll", "rtc_clkout",
+			     "hclk", "pclk", "gate_dclk1" };
+
+#define DCLKCON_DCLK_DIV_MASK		0xf
+#define DCLKCON_DCLK0_DIV_SHIFT		4
+#define DCLKCON_DCLK0_CMP_SHIFT		8
+#define DCLKCON_DCLK1_DIV_SHIFT		20
+#define DCLKCON_DCLK1_CMP_SHIFT		24
+
+static void s3c24xx_dclk_update_cmp(struct s3c24xx_dclk *s3c24xx_dclk,
+				    int div_shift, int cmp_shift)
+{
+	unsigned long flags = 0;
+	u32 dclk_con, div, cmp;
+
+	spin_lock_irqsave(&s3c24xx_dclk->dclk_lock, flags);
+
+	dclk_con = readl_relaxed(s3c24xx_dclk->base);
+
+	div = ((dclk_con >> div_shift) & DCLKCON_DCLK_DIV_MASK) + 1;
+	cmp = ((div + 1) / 2) - 1;
+
+	dclk_con &= ~(DCLKCON_DCLK_DIV_MASK << cmp_shift);
+	dclk_con |= (cmp << cmp_shift);
+
+	writel_relaxed(dclk_con, s3c24xx_dclk->base);
+
+	spin_unlock_irqrestore(&s3c24xx_dclk->dclk_lock, flags);
+}
+
+static int s3c24xx_dclk0_div_notify(struct notifier_block *nb,
+			       unsigned long event, void *data)
+{
+	struct s3c24xx_dclk *s3c24xx_dclk = to_s3c24xx_dclk0(nb);
+
+	if (event == POST_RATE_CHANGE) {
+		s3c24xx_dclk_update_cmp(s3c24xx_dclk,
+			DCLKCON_DCLK0_DIV_SHIFT, DCLKCON_DCLK0_CMP_SHIFT);
+	}
+
+	return NOTIFY_DONE;
+}
+
+static int s3c24xx_dclk1_div_notify(struct notifier_block *nb,
+			       unsigned long event, void *data)
+{
+	struct s3c24xx_dclk *s3c24xx_dclk = to_s3c24xx_dclk1(nb);
+
+	if (event == POST_RATE_CHANGE) {
+		s3c24xx_dclk_update_cmp(s3c24xx_dclk,
+			DCLKCON_DCLK1_DIV_SHIFT, DCLKCON_DCLK1_CMP_SHIFT);
+	}
+
+	return NOTIFY_DONE;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int s3c24xx_dclk_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev);
+
+	s3c24xx_dclk->reg_save = readl_relaxed(s3c24xx_dclk->base);
+	return 0;
+}
+
+static int s3c24xx_dclk_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev);
+
+	writel_relaxed(s3c24xx_dclk->reg_save, s3c24xx_dclk->base);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(s3c24xx_dclk_pm_ops,
+			 s3c24xx_dclk_suspend, s3c24xx_dclk_resume);
+
+static int s3c24xx_dclk_probe(struct platform_device *pdev)
+{
+	struct s3c24xx_dclk *s3c24xx_dclk;
+	struct resource *mem;
+	struct clk **clk_table;
+	struct s3c24xx_dclk_drv_data *dclk_variant;
+	int ret, i;
+
+	s3c24xx_dclk = devm_kzalloc(&pdev->dev, sizeof(*s3c24xx_dclk),
+				    GFP_KERNEL);
+	if (!s3c24xx_dclk)
+		return -ENOMEM;
+
+	s3c24xx_dclk->dev = &pdev->dev;
+	platform_set_drvdata(pdev, s3c24xx_dclk);
+	spin_lock_init(&s3c24xx_dclk->dclk_lock);
+
+	clk_table = devm_kzalloc(&pdev->dev,
+				 sizeof(struct clk *) * DCLK_MAX_CLKS,
+				 GFP_KERNEL);
+	if (!clk_table)
+		return -ENOMEM;
+
+	s3c24xx_dclk->clk_data.clks = clk_table;
+	s3c24xx_dclk->clk_data.clk_num = DCLK_MAX_CLKS;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	s3c24xx_dclk->base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(s3c24xx_dclk->base))
+		return PTR_ERR(s3c24xx_dclk->base);
+
+	dclk_variant = (struct s3c24xx_dclk_drv_data *)
+				platform_get_device_id(pdev)->driver_data;
+
+
+	clk_table[MUX_DCLK0] = clk_register_mux(&pdev->dev, "mux_dclk0",
+				dclk_variant->mux_parent_names,
+				dclk_variant->mux_num_parents, 0,
+				s3c24xx_dclk->base, 1, 1, 0,
+				&s3c24xx_dclk->dclk_lock);
+	clk_table[MUX_DCLK1] = clk_register_mux(&pdev->dev, "mux_dclk1",
+				dclk_variant->mux_parent_names,
+				dclk_variant->mux_num_parents, 0,
+				s3c24xx_dclk->base, 17, 1, 0,
+				&s3c24xx_dclk->dclk_lock);
+
+	clk_table[DIV_DCLK0] = clk_register_divider(&pdev->dev, "div_dclk0",
+				"mux_dclk0", 0, s3c24xx_dclk->base,
+				4, 4, 0, &s3c24xx_dclk->dclk_lock);
+	clk_table[DIV_DCLK1] = clk_register_divider(&pdev->dev, "div_dclk1",
+				"mux_dclk1", 0, s3c24xx_dclk->base,
+				20, 4, 0, &s3c24xx_dclk->dclk_lock);
+
+	clk_table[GATE_DCLK0] = clk_register_gate(&pdev->dev, "gate_dclk0",
+				"div_dclk0", CLK_SET_RATE_PARENT,
+				s3c24xx_dclk->base, 0, 0,
+				&s3c24xx_dclk->dclk_lock);
+	clk_table[GATE_DCLK1] = clk_register_gate(&pdev->dev, "gate_dclk1",
+				"div_dclk1", CLK_SET_RATE_PARENT,
+				s3c24xx_dclk->base, 16, 0,
+				&s3c24xx_dclk->dclk_lock);
+
+	clk_table[MUX_CLKOUT0] = s3c24xx_register_clkout(&pdev->dev,
+				"clkout0", dclk_variant->clkout0_parent_names,
+				dclk_variant->clkout0_num_parents, 4, 7);
+	clk_table[MUX_CLKOUT1] = s3c24xx_register_clkout(&pdev->dev,
+				"clkout1", dclk_variant->clkout1_parent_names,
+				dclk_variant->clkout1_num_parents, 8, 7);
+
+	for (i = 0; i < DCLK_MAX_CLKS; i++)
+		if (IS_ERR(clk_table[i])) {
+			dev_err(&pdev->dev, "clock %d failed to register\n", i);
+			ret = PTR_ERR(clk_table[i]);
+			goto err_clk_register;
+		}
+
+	ret = clk_register_clkdev(clk_table[MUX_DCLK0], "dclk0", NULL);
+	if (!ret)
+		ret = clk_register_clkdev(clk_table[MUX_DCLK1], "dclk1", NULL);
+	if (!ret)
+		ret = clk_register_clkdev(clk_table[MUX_CLKOUT0],
+					  "clkout0", NULL);
+	if (!ret)
+		ret = clk_register_clkdev(clk_table[MUX_CLKOUT1],
+					  "clkout1", NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register aliases, %d\n", ret);
+		goto err_clk_register;
+	}
+
+	s3c24xx_dclk->dclk0_div_change_nb.notifier_call =
+						s3c24xx_dclk0_div_notify;
+
+	s3c24xx_dclk->dclk1_div_change_nb.notifier_call =
+						s3c24xx_dclk1_div_notify;
+
+	ret = clk_notifier_register(clk_table[DIV_DCLK0],
+				    &s3c24xx_dclk->dclk0_div_change_nb);
+	if (ret)
+		goto err_clk_register;
+
+	ret = clk_notifier_register(clk_table[DIV_DCLK1],
+				    &s3c24xx_dclk->dclk1_div_change_nb);
+	if (ret)
+		goto err_dclk_notify;
+
+	return 0;
+
+err_dclk_notify:
+	clk_notifier_unregister(clk_table[DIV_DCLK0],
+				&s3c24xx_dclk->dclk0_div_change_nb);
+err_clk_register:
+	for (i = 0; i < DCLK_MAX_CLKS; i++)
+		if (clk_table[i] && !IS_ERR(clk_table[i]))
+			clk_unregister(clk_table[i]);
+
+	return ret;
+}
+
+static int s3c24xx_dclk_remove(struct platform_device *pdev)
+{
+	struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev);
+	struct clk **clk_table = s3c24xx_dclk->clk_data.clks;
+	int i;
+
+	clk_notifier_unregister(clk_table[DIV_DCLK1],
+				&s3c24xx_dclk->dclk1_div_change_nb);
+	clk_notifier_unregister(clk_table[DIV_DCLK0],
+				&s3c24xx_dclk->dclk0_div_change_nb);
+
+	for (i = 0; i < DCLK_MAX_CLKS; i++)
+		clk_unregister(clk_table[i]);
+
+	return 0;
+}
+
+static struct s3c24xx_dclk_drv_data dclk_variants[] = {
+	[S3C2410] = {
+		.clkout0_parent_names = clkout0_s3c2410_p,
+		.clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2410_p),
+		.clkout1_parent_names = clkout1_s3c2410_p,
+		.clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2410_p),
+		.mux_parent_names = dclk_s3c2410_p,
+		.mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p),
+	},
+	[S3C2412] = {
+		.clkout0_parent_names = clkout0_s3c2412_p,
+		.clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2412_p),
+		.clkout1_parent_names = clkout1_s3c2412_p,
+		.clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2412_p),
+		.mux_parent_names = dclk_s3c2410_p,
+		.mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p),
+	},
+	[S3C2440] = {
+		.clkout0_parent_names = clkout0_s3c2440_p,
+		.clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2440_p),
+		.clkout1_parent_names = clkout1_s3c2440_p,
+		.clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2440_p),
+		.mux_parent_names = dclk_s3c2410_p,
+		.mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p),
+	},
+	[S3C2443] = {
+		.clkout0_parent_names = clkout0_s3c2443_p,
+		.clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2443_p),
+		.clkout1_parent_names = clkout1_s3c2443_p,
+		.clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2443_p),
+		.mux_parent_names = dclk_s3c2443_p,
+		.mux_num_parents = ARRAY_SIZE(dclk_s3c2443_p),
+	},
+};
+
+static struct platform_device_id s3c24xx_dclk_driver_ids[] = {
+	{
+		.name		= "s3c2410-dclk",
+		.driver_data	= (kernel_ulong_t)&dclk_variants[S3C2410],
+	}, {
+		.name		= "s3c2412-dclk",
+		.driver_data	= (kernel_ulong_t)&dclk_variants[S3C2412],
+	}, {
+		.name		= "s3c2440-dclk",
+		.driver_data	= (kernel_ulong_t)&dclk_variants[S3C2440],
+	}, {
+		.name		= "s3c2443-dclk",
+		.driver_data	= (kernel_ulong_t)&dclk_variants[S3C2443],
+	},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(platform, s3c24xx_dclk_driver_ids);
+
+static struct platform_driver s3c24xx_dclk_driver = {
+	.driver = {
+		.name		= "s3c24xx-dclk",
+		.owner		= THIS_MODULE,
+		.pm		= &s3c24xx_dclk_pm_ops,
+	},
+	.probe = s3c24xx_dclk_probe,
+	.remove = s3c24xx_dclk_remove,
+	.id_table = s3c24xx_dclk_driver_ids,
+};
+module_platform_driver(s3c24xx_dclk_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_DESCRIPTION("Driver for the S3C24XX external clock outputs");

drivers/clk/samsung/clk-s3c2410.c

@@ -0,0 +1,482 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for S3C2410 and following SoCs.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/s3c2410.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define LOCKTIME	0x00
+#define MPLLCON		0x04
+#define UPLLCON		0x08
+#define CLKCON		0x0c
+#define CLKSLOW		0x10
+#define CLKDIVN		0x14
+#define CAMDIVN		0x18
+
+/* the soc types */
+enum supported_socs {
+	S3C2410,
+	S3C2440,
+	S3C2442,
+};
+
+/* list of PLLs to be registered */
+enum s3c2410_plls {
+	mpll, upll,
+};
+
+static void __iomem *reg_base;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *s3c2410_save;
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static unsigned long s3c2410_clk_regs[] __initdata = {
+	LOCKTIME,
+	MPLLCON,
+	UPLLCON,
+	CLKCON,
+	CLKSLOW,
+	CLKDIVN,
+	CAMDIVN,
+};
+
+static int s3c2410_clk_suspend(void)
+{
+	samsung_clk_save(reg_base, s3c2410_save,
+				ARRAY_SIZE(s3c2410_clk_regs));
+
+	return 0;
+}
+
+static void s3c2410_clk_resume(void)
+{
+	samsung_clk_restore(reg_base, s3c2410_save,
+				ARRAY_SIZE(s3c2410_clk_regs));
+}
+
+static struct syscore_ops s3c2410_clk_syscore_ops = {
+	.suspend = s3c2410_clk_suspend,
+	.resume = s3c2410_clk_resume,
+};
+
+static void s3c2410_clk_sleep_init(void)
+{
+	s3c2410_save = samsung_clk_alloc_reg_dump(s3c2410_clk_regs,
+						ARRAY_SIZE(s3c2410_clk_regs));
+	if (!s3c2410_save) {
+		pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+			__func__);
+		return;
+	}
+
+	register_syscore_ops(&s3c2410_clk_syscore_ops);
+	return;
+}
+#else
+static void s3c2410_clk_sleep_init(void) {}
+#endif
+
+PNAME(fclk_p) = { "mpll", "div_slow" };
+
+struct samsung_mux_clock s3c2410_common_muxes[] __initdata = {
+	MUX(FCLK, "fclk", fclk_p, CLKSLOW, 4, 1),
+};
+
+static struct clk_div_table divslow_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 6 },
+	{ .val = 4, .div = 8 },
+	{ .val = 5, .div = 10 },
+	{ .val = 6, .div = 12 },
+	{ .val = 7, .div = 14 },
+	{ /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2410_common_dividers[] __initdata = {
+	DIV_T(0, "div_slow", "xti", CLKSLOW, 0, 3, divslow_d),
+	DIV(PCLK, "pclk", "hclk", CLKDIVN, 0, 1),
+};
+
+struct samsung_gate_clock s3c2410_common_gates[] __initdata = {
+	GATE(PCLK_SPI, "spi", "pclk", CLKCON, 18, 0, 0),
+	GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 17, 0, 0),
+	GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 16, 0, 0),
+	GATE(PCLK_ADC, "adc", "pclk", CLKCON, 15, 0, 0),
+	GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 14, 0, 0),
+	GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 13, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 12, 0, 0),
+	GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 11, 0, 0),
+	GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 10, 0, 0),
+	GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 9, 0, 0),
+	GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 8, 0, 0),
+	GATE(HCLK_USBD, "usb-device", "hclk", CLKCON, 7, 0, 0),
+	GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0),
+	GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0),
+	GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0),
+};
+
+/* should be added _after_ the soc-specific clocks are created */
+struct samsung_clock_alias s3c2410_common_aliases[] __initdata = {
+	ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"),
+	ALIAS(PCLK_ADC, NULL, "adc"),
+	ALIAS(PCLK_RTC, NULL, "rtc"),
+	ALIAS(PCLK_PWM, NULL, "timers"),
+	ALIAS(HCLK_LCD, NULL, "lcd"),
+	ALIAS(HCLK_USBD, NULL, "usb-device"),
+	ALIAS(HCLK_USBH, NULL, "usb-host"),
+	ALIAS(UCLK, NULL, "usb-bus-host"),
+	ALIAS(UCLK, NULL, "usb-bus-gadget"),
+	ALIAS(ARMCLK, NULL, "armclk"),
+	ALIAS(UCLK, NULL, "uclk"),
+	ALIAS(HCLK, NULL, "hclk"),
+	ALIAS(MPLL, NULL, "mpll"),
+	ALIAS(FCLK, NULL, "fclk"),
+};
+
+/* S3C2410 specific clocks */
+
+static struct samsung_pll_rate_table pll_s3c2410_12mhz_tbl[] __initdata = {
+	/* sorted in descending order */
+	/* 2410A extras */
+	PLL_35XX_RATE(270000000, 127, 1, 1),
+	PLL_35XX_RATE(268000000, 126, 1, 1),
+	PLL_35XX_RATE(266000000, 125, 1, 1),
+	PLL_35XX_RATE(226000000, 105, 1, 1),
+	PLL_35XX_RATE(210000000, 132, 2, 1),
+	/* 2410 common */
+	PLL_35XX_RATE(203000000, 161, 3, 1),
+	PLL_35XX_RATE(192000000, 88, 1, 1),
+	PLL_35XX_RATE(186000000, 85, 1, 1),
+	PLL_35XX_RATE(180000000, 82, 1, 1),
+	PLL_35XX_RATE(170000000, 77, 1, 1),
+	PLL_35XX_RATE(158000000, 71, 1, 1),
+	PLL_35XX_RATE(152000000, 68, 1, 1),
+	PLL_35XX_RATE(147000000, 90, 2, 1),
+	PLL_35XX_RATE(135000000, 82, 2, 1),
+	PLL_35XX_RATE(124000000, 116, 1, 2),
+	PLL_35XX_RATE(118000000, 150, 2, 2),
+	PLL_35XX_RATE(113000000, 105, 1, 2),
+	PLL_35XX_RATE(101000000, 127, 2, 2),
+	PLL_35XX_RATE(90000000, 112, 2, 2),
+	PLL_35XX_RATE(85000000, 105, 2, 2),
+	PLL_35XX_RATE(79000000, 71, 1, 2),
+	PLL_35XX_RATE(68000000, 82, 2, 2),
+	PLL_35XX_RATE(56000000, 142, 2, 3),
+	PLL_35XX_RATE(48000000, 120, 2, 3),
+	PLL_35XX_RATE(51000000, 161, 3, 3),
+	PLL_35XX_RATE(45000000, 82, 1, 3),
+	PLL_35XX_RATE(34000000, 82, 2, 3),
+	{ /* sentinel */ },
+};
+
+static struct samsung_pll_clock s3c2410_plls[] __initdata = {
+	[mpll] = PLL(pll_s3c2410_mpll, MPLL, "mpll", "xti",
+						LOCKTIME, MPLLCON, NULL),
+	[upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti",
+						LOCKTIME, UPLLCON, NULL),
+};
+
+struct samsung_div_clock s3c2410_dividers[] __initdata = {
+	DIV(HCLK, "hclk", "mpll", CLKDIVN, 1, 1),
+};
+
+struct samsung_fixed_factor_clock s3c2410_ffactor[] __initdata = {
+	/*
+	 * armclk is directly supplied by the fclk, without
+	 * switching possibility like on the s3c244x below.
+	 */
+	FFACTOR(ARMCLK, "armclk", "fclk", 1, 1, 0),
+
+	/* uclk is fed from the unmodified upll */
+	FFACTOR(UCLK, "uclk", "upll", 1, 1, 0),
+};
+
+struct samsung_clock_alias s3c2410_aliases[] __initdata = {
+	ALIAS(PCLK_UART0, "s3c2410-uart.0", "uart"),
+	ALIAS(PCLK_UART1, "s3c2410-uart.1", "uart"),
+	ALIAS(PCLK_UART2, "s3c2410-uart.2", "uart"),
+	ALIAS(PCLK_UART0, "s3c2410-uart.0", "clk_uart_baud0"),
+	ALIAS(PCLK_UART1, "s3c2410-uart.1", "clk_uart_baud0"),
+	ALIAS(PCLK_UART2, "s3c2410-uart.2", "clk_uart_baud0"),
+	ALIAS(UCLK, NULL, "clk_uart_baud1"),
+};
+
+/* S3C244x specific clocks */
+
+static struct samsung_pll_rate_table pll_s3c244x_12mhz_tbl[] __initdata = {
+	/* sorted in descending order */
+	PLL_35XX_RATE(400000000, 0x5c, 1, 1),
+	PLL_35XX_RATE(390000000, 0x7a, 2, 1),
+	PLL_35XX_RATE(380000000, 0x57, 1, 1),
+	PLL_35XX_RATE(370000000, 0xb1, 4, 1),
+	PLL_35XX_RATE(360000000, 0x70, 2, 1),
+	PLL_35XX_RATE(350000000, 0xa7, 4, 1),
+	PLL_35XX_RATE(340000000, 0x4d, 1, 1),
+	PLL_35XX_RATE(330000000, 0x66, 2, 1),
+	PLL_35XX_RATE(320000000, 0x98, 4, 1),
+	PLL_35XX_RATE(310000000, 0x93, 4, 1),
+	PLL_35XX_RATE(300000000, 0x75, 3, 1),
+	PLL_35XX_RATE(240000000, 0x70, 1, 2),
+	PLL_35XX_RATE(230000000, 0x6b, 1, 2),
+	PLL_35XX_RATE(220000000, 0x66, 1, 2),
+	PLL_35XX_RATE(210000000, 0x84, 2, 2),
+	PLL_35XX_RATE(200000000, 0x5c, 1, 2),
+	PLL_35XX_RATE(190000000, 0x57, 1, 2),
+	PLL_35XX_RATE(180000000, 0x70, 2, 2),
+	PLL_35XX_RATE(170000000, 0x4d, 1, 2),
+	PLL_35XX_RATE(160000000, 0x98, 4, 2),
+	PLL_35XX_RATE(150000000, 0x75, 3, 2),
+	PLL_35XX_RATE(120000000, 0x70, 1, 3),
+	PLL_35XX_RATE(110000000, 0x66, 1, 3),
+	PLL_35XX_RATE(100000000, 0x5c, 1, 3),
+	PLL_35XX_RATE(90000000, 0x70, 2, 3),
+	PLL_35XX_RATE(80000000, 0x98, 4, 3),
+	PLL_35XX_RATE(75000000, 0x75, 3, 3),
+	{ /* sentinel */ },
+};
+
+static struct samsung_pll_clock s3c244x_common_plls[] __initdata = {
+	[mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti",
+						LOCKTIME, MPLLCON, NULL),
+	[upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti",
+						LOCKTIME, UPLLCON, NULL),
+};
+
+PNAME(hclk_p) = { "fclk", "div_hclk_2", "div_hclk_4", "div_hclk_3" };
+PNAME(armclk_p) = { "fclk", "hclk" };
+
+struct samsung_mux_clock s3c244x_common_muxes[] __initdata = {
+	MUX(HCLK, "hclk", hclk_p, CLKDIVN, 1, 2),
+	MUX(ARMCLK, "armclk", armclk_p, CAMDIVN, 12, 1),
+};
+
+struct samsung_fixed_factor_clock s3c244x_common_ffactor[] __initdata = {
+	FFACTOR(0, "div_hclk_2", "fclk", 1, 2, 0),
+	FFACTOR(0, "ff_cam", "div_cam", 2, 1, CLK_SET_RATE_PARENT),
+};
+
+static struct clk_div_table div_hclk_4_d[] = {
+	{ .val = 0, .div = 4 },
+	{ .val = 1, .div = 8 },
+	{ /* sentinel */ },
+};
+
+static struct clk_div_table div_hclk_3_d[] = {
+	{ .val = 0, .div = 3 },
+	{ .val = 1, .div = 6 },
+	{ /* sentinel */ },
+};
+
+struct samsung_div_clock s3c244x_common_dividers[] __initdata = {
+	DIV(UCLK, "uclk", "upll", CLKDIVN, 3, 1),
+	DIV(0, "div_hclk", "fclk", CLKDIVN, 1, 1),
+	DIV_T(0, "div_hclk_4", "fclk", CAMDIVN, 9, 1, div_hclk_4_d),
+	DIV_T(0, "div_hclk_3", "fclk", CAMDIVN, 8, 1, div_hclk_3_d),
+	DIV(0, "div_cam", "upll", CAMDIVN, 0, 3),
+};
+
+struct samsung_gate_clock s3c244x_common_gates[] __initdata = {
+	GATE(HCLK_CAM, "cam", "hclk", CLKCON, 19, 0, 0),
+};
+
+struct samsung_clock_alias s3c244x_common_aliases[] __initdata = {
+	ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"),
+	ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"),
+	ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"),
+	ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"),
+	ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"),
+	ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"),
+	ALIAS(HCLK_CAM, NULL, "camif"),
+	ALIAS(CAMIF, NULL, "camif-upll"),
+};
+
+/* S3C2440 specific clocks */
+
+PNAME(s3c2440_camif_p) = { "upll", "ff_cam" };
+
+struct samsung_mux_clock s3c2440_muxes[] __initdata = {
+	MUX(CAMIF, "camif", s3c2440_camif_p, CAMDIVN, 4, 1),
+};
+
+struct samsung_gate_clock s3c2440_gates[] __initdata = {
+	GATE(PCLK_AC97, "ac97", "pclk", CLKCON, 20, 0, 0),
+};
+
+/* S3C2442 specific clocks */
+
+struct samsung_fixed_factor_clock s3c2442_ffactor[] __initdata = {
+	FFACTOR(0, "upll_3", "upll", 1, 3, 0),
+};
+
+PNAME(s3c2442_camif_p) = { "upll", "ff_cam", "upll", "upll_3" };
+
+struct samsung_mux_clock s3c2442_muxes[] __initdata = {
+	MUX(CAMIF, "camif", s3c2442_camif_p, CAMDIVN, 4, 2),
+};
+
+/*
+ * fixed rate clocks generated outside the soc
+ * Only necessary until the devicetree-move is complete
+ */
+#define XTI	1
+struct samsung_fixed_rate_clock s3c2410_common_frate_clks[] __initdata = {
+	FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0),
+};
+
+static void __init s3c2410_common_clk_register_fixed_ext(
+		struct samsung_clk_provider *ctx,
+		unsigned long xti_f)
+{
+	struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal");
+
+	s3c2410_common_frate_clks[0].fixed_rate = xti_f;
+	samsung_clk_register_fixed_rate(ctx, s3c2410_common_frate_clks,
+				ARRAY_SIZE(s3c2410_common_frate_clks));
+
+	samsung_clk_register_alias(ctx, &xti_alias, 1);
+}
+
+void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    int current_soc,
+				    void __iomem *base)
+{
+	struct samsung_clk_provider *ctx;
+	reg_base = base;
+
+	if (np) {
+		reg_base = of_iomap(np, 0);
+		if (!reg_base)
+			panic("%s: failed to map registers\n", __func__);
+	}
+
+	ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
+
+	/* Register external clocks only in non-dt cases */
+	if (!np)
+		s3c2410_common_clk_register_fixed_ext(ctx, xti_f);
+
+	if (current_soc == 2410) {
+		if (_get_rate("xti") == 12 * MHZ) {
+			s3c2410_plls[mpll].rate_table = pll_s3c2410_12mhz_tbl;
+			s3c2410_plls[upll].rate_table = pll_s3c2410_12mhz_tbl;
+		}
+
+		/* Register PLLs. */
+		samsung_clk_register_pll(ctx, s3c2410_plls,
+				ARRAY_SIZE(s3c2410_plls), reg_base);
+
+	} else { /* S3C2440, S3C2442 */
+		if (_get_rate("xti") == 12 * MHZ) {
+			/*
+			 * plls follow different calculation schemes, with the
+			 * upll following the same scheme as the s3c2410 plls
+			 */
+			s3c244x_common_plls[mpll].rate_table =
+							pll_s3c244x_12mhz_tbl;
+			s3c244x_common_plls[upll].rate_table =
+							pll_s3c2410_12mhz_tbl;
+		}
+
+		/* Register PLLs. */
+		samsung_clk_register_pll(ctx, s3c244x_common_plls,
+				ARRAY_SIZE(s3c244x_common_plls), reg_base);
+	}
+
+	/* Register common internal clocks. */
+	samsung_clk_register_mux(ctx, s3c2410_common_muxes,
+			ARRAY_SIZE(s3c2410_common_muxes));
+	samsung_clk_register_div(ctx, s3c2410_common_dividers,
+			ARRAY_SIZE(s3c2410_common_dividers));
+	samsung_clk_register_gate(ctx, s3c2410_common_gates,
+		ARRAY_SIZE(s3c2410_common_gates));
+
+	if (current_soc == S3C2440 || current_soc == S3C2442) {
+		samsung_clk_register_div(ctx, s3c244x_common_dividers,
+				ARRAY_SIZE(s3c244x_common_dividers));
+		samsung_clk_register_gate(ctx, s3c244x_common_gates,
+				ARRAY_SIZE(s3c244x_common_gates));
+		samsung_clk_register_mux(ctx, s3c244x_common_muxes,
+				ARRAY_SIZE(s3c244x_common_muxes));
+		samsung_clk_register_fixed_factor(ctx, s3c244x_common_ffactor,
+				ARRAY_SIZE(s3c244x_common_ffactor));
+	}
+
+	/* Register SoC-specific clocks. */
+	switch (current_soc) {
+	case S3C2410:
+		samsung_clk_register_div(ctx, s3c2410_dividers,
+				ARRAY_SIZE(s3c2410_dividers));
+		samsung_clk_register_fixed_factor(ctx, s3c2410_ffactor,
+				ARRAY_SIZE(s3c2410_ffactor));
+		samsung_clk_register_alias(ctx, s3c2410_aliases,
+			ARRAY_SIZE(s3c2410_common_aliases));
+		break;
+	case S3C2440:
+		samsung_clk_register_mux(ctx, s3c2440_muxes,
+				ARRAY_SIZE(s3c2440_muxes));
+		samsung_clk_register_gate(ctx, s3c2440_gates,
+				ARRAY_SIZE(s3c2440_gates));
+		break;
+	case S3C2442:
+		samsung_clk_register_mux(ctx, s3c2442_muxes,
+				ARRAY_SIZE(s3c2442_muxes));
+		samsung_clk_register_fixed_factor(ctx, s3c2442_ffactor,
+				ARRAY_SIZE(s3c2442_ffactor));
+		break;
+	}
+
+	/*
+	 * Register common aliases at the end, as some of the aliased clocks
+	 * are SoC specific.
+	 */
+	samsung_clk_register_alias(ctx, s3c2410_common_aliases,
+		ARRAY_SIZE(s3c2410_common_aliases));
+
+	if (current_soc == S3C2440 || current_soc == S3C2442) {
+		samsung_clk_register_alias(ctx, s3c244x_common_aliases,
+			ARRAY_SIZE(s3c244x_common_aliases));
+	}
+
+	s3c2410_clk_sleep_init();
+}
+
+static void __init s3c2410_clk_init(struct device_node *np)
+{
+	s3c2410_common_clk_init(np, 0, S3C2410, 0);
+}
+CLK_OF_DECLARE(s3c2410_clk, "samsung,s3c2410-clock", s3c2410_clk_init);
+
+static void __init s3c2440_clk_init(struct device_node *np)
+{
+	s3c2410_common_clk_init(np, 0, S3C2440, 0);
+}
+CLK_OF_DECLARE(s3c2440_clk, "samsung,s3c2440-clock", s3c2440_clk_init);
+
+static void __init s3c2442_clk_init(struct device_node *np)
+{
+	s3c2410_common_clk_init(np, 0, S3C2442, 0);
+}
+CLK_OF_DECLARE(s3c2442_clk, "samsung,s3c2442-clock", s3c2442_clk_init);

drivers/clk/samsung/clk-s3c2412.c

@@ -0,0 +1,274 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for S3C2412 and S3C2413.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/s3c2412.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define LOCKTIME	0x00
+#define MPLLCON		0x04
+#define UPLLCON		0x08
+#define CLKCON		0x0c
+#define CLKDIVN		0x14
+#define CLKSRC		0x1c
+
+/* list of PLLs to be registered */
+enum s3c2412_plls {
+	mpll, upll,
+};
+
+static void __iomem *reg_base;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *s3c2412_save;
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static unsigned long s3c2412_clk_regs[] __initdata = {
+	LOCKTIME,
+	MPLLCON,
+	UPLLCON,
+	CLKCON,
+	CLKDIVN,
+	CLKSRC,
+};
+
+static int s3c2412_clk_suspend(void)
+{
+	samsung_clk_save(reg_base, s3c2412_save,
+				ARRAY_SIZE(s3c2412_clk_regs));
+
+	return 0;
+}
+
+static void s3c2412_clk_resume(void)
+{
+	samsung_clk_restore(reg_base, s3c2412_save,
+				ARRAY_SIZE(s3c2412_clk_regs));
+}
+
+static struct syscore_ops s3c2412_clk_syscore_ops = {
+	.suspend = s3c2412_clk_suspend,
+	.resume = s3c2412_clk_resume,
+};
+
+static void s3c2412_clk_sleep_init(void)
+{
+	s3c2412_save = samsung_clk_alloc_reg_dump(s3c2412_clk_regs,
+						ARRAY_SIZE(s3c2412_clk_regs));
+	if (!s3c2412_save) {
+		pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+			__func__);
+		return;
+	}
+
+	register_syscore_ops(&s3c2412_clk_syscore_ops);
+	return;
+}
+#else
+static void s3c2412_clk_sleep_init(void) {}
+#endif
+
+static struct clk_div_table divxti_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 6 },
+	{ .val = 4, .div = 8 },
+	{ .val = 5, .div = 10 },
+	{ .val = 6, .div = 12 },
+	{ .val = 7, .div = 14 },
+	{ /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2412_dividers[] __initdata = {
+	DIV_T(0, "div_xti", "xti", CLKSRC, 0, 3, divxti_d),
+	DIV(0, "div_cam", "mux_cam", CLKDIVN, 16, 4),
+	DIV(0, "div_i2s", "mux_i2s", CLKDIVN, 12, 4),
+	DIV(0, "div_uart", "mux_uart", CLKDIVN, 8, 4),
+	DIV(0, "div_usb", "mux_usb", CLKDIVN, 6, 1),
+	DIV(0, "div_hclk_half", "hclk", CLKDIVN, 5, 1),
+	DIV(ARMDIV, "armdiv", "msysclk", CLKDIVN, 3, 1),
+	DIV(PCLK, "pclk", "hclk", CLKDIVN, 2, 1),
+	DIV(HCLK, "hclk", "armdiv", CLKDIVN, 0, 2),
+};
+
+struct samsung_fixed_factor_clock s3c2412_ffactor[] __initdata = {
+	FFACTOR(0, "ff_hclk", "hclk", 2, 1, CLK_SET_RATE_PARENT),
+};
+
+/*
+ * The first two use the OM[4] setting, which is not readable from
+ * software, so assume it is set to xti.
+ */
+PNAME(erefclk_p) = { "xti", "xti", "xti", "ext" };
+PNAME(urefclk_p) = { "xti", "xti", "xti", "ext" };
+
+PNAME(camclk_p) = { "usysclk", "hclk" };
+PNAME(usbclk_p) = { "usysclk", "hclk" };
+PNAME(i2sclk_p) = { "erefclk", "mpll" };
+PNAME(uartclk_p) = { "erefclk", "mpll" };
+PNAME(usysclk_p) = { "urefclk", "upll" };
+PNAME(msysclk_p) = { "mdivclk", "mpll" };
+PNAME(mdivclk_p) = { "xti", "div_xti" };
+PNAME(armclk_p) = { "armdiv", "hclk" };
+
+struct samsung_mux_clock s3c2412_muxes[] __initdata = {
+	MUX(0, "erefclk", erefclk_p, CLKSRC, 14, 2),
+	MUX(0, "urefclk", urefclk_p, CLKSRC, 12, 2),
+	MUX(0, "mux_cam", camclk_p, CLKSRC, 11, 1),
+	MUX(0, "mux_usb", usbclk_p, CLKSRC, 10, 1),
+	MUX(0, "mux_i2s", i2sclk_p, CLKSRC, 9, 1),
+	MUX(0, "mux_uart", uartclk_p, CLKSRC, 8, 1),
+	MUX(USYSCLK, "usysclk", usysclk_p, CLKSRC, 5, 1),
+	MUX(MSYSCLK, "msysclk", msysclk_p, CLKSRC, 4, 1),
+	MUX(MDIVCLK, "mdivclk", mdivclk_p, CLKSRC, 3, 1),
+	MUX(ARMCLK, "armclk", armclk_p, CLKDIVN, 4, 1),
+};
+
+static struct samsung_pll_clock s3c2412_plls[] __initdata = {
+	[mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti",
+						LOCKTIME, MPLLCON, NULL),
+	[upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "urefclk",
+						LOCKTIME, UPLLCON, NULL),
+};
+
+struct samsung_gate_clock s3c2412_gates[] __initdata = {
+	GATE(PCLK_WDT, "wdt", "pclk", CLKCON, 28, 0, 0),
+	GATE(PCLK_SPI, "spi", "pclk", CLKCON, 27, 0, 0),
+	GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 26, 0, 0),
+	GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 25, 0, 0),
+	GATE(PCLK_ADC, "adc", "pclk", CLKCON, 24, 0, 0),
+	GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 23, 0, 0),
+	GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 22, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 21, 0, 0),
+	GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 20, 0, 0),
+	GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 19, 0, 0),
+	GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 18, 0, 0),
+	GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 17, 0, 0),
+	GATE(PCLK_USBD, "usb-device", "pclk", CLKCON, 16, 0, 0),
+	GATE(SCLK_CAM, "sclk_cam", "div_cam", CLKCON, 15, 0, 0),
+	GATE(SCLK_UART, "sclk_uart", "div_uart", CLKCON, 14, 0, 0),
+	GATE(SCLK_I2S, "sclk_i2s", "div_i2s", CLKCON, 13, 0, 0),
+	GATE(SCLK_USBH, "sclk_usbh", "div_usb", CLKCON, 12, 0, 0),
+	GATE(SCLK_USBD, "sclk_usbd", "div_usb", CLKCON, 11, 0, 0),
+	GATE(HCLK_HALF, "hclk_half", "div_hclk_half", CLKCON, 10, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_X2, "hclkx2", "ff_hclk", CLKCON, 9, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_SDRAM, "sdram", "hclk", CLKCON, 8, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0),
+	GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0),
+	GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0),
+	GATE(HCLK_DMA3, "dma3", "hclk", CLKCON, 3, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA2, "dma2", "hclk", CLKCON, 2, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA1, "dma1", "hclk", CLKCON, 1, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA0, "dma0", "hclk", CLKCON, 0, CLK_IGNORE_UNUSED, 0),
+};
+
+struct samsung_clock_alias s3c2412_aliases[] __initdata = {
+	ALIAS(PCLK_UART0, "s3c2412-uart.0", "uart"),
+	ALIAS(PCLK_UART1, "s3c2412-uart.1", "uart"),
+	ALIAS(PCLK_UART2, "s3c2412-uart.2", "uart"),
+	ALIAS(PCLK_UART0, "s3c2412-uart.0", "clk_uart_baud2"),
+	ALIAS(PCLK_UART1, "s3c2412-uart.1", "clk_uart_baud2"),
+	ALIAS(PCLK_UART2, "s3c2412-uart.2", "clk_uart_baud2"),
+	ALIAS(SCLK_UART, NULL, "clk_uart_baud3"),
+	ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"),
+	ALIAS(PCLK_ADC, NULL, "adc"),
+	ALIAS(PCLK_RTC, NULL, "rtc"),
+	ALIAS(PCLK_PWM, NULL, "timers"),
+	ALIAS(HCLK_LCD, NULL, "lcd"),
+	ALIAS(PCLK_USBD, NULL, "usb-device"),
+	ALIAS(SCLK_USBD, NULL, "usb-bus-gadget"),
+	ALIAS(HCLK_USBH, NULL, "usb-host"),
+	ALIAS(SCLK_USBH, NULL, "usb-bus-host"),
+	ALIAS(ARMCLK, NULL, "armclk"),
+	ALIAS(HCLK, NULL, "hclk"),
+	ALIAS(MPLL, NULL, "mpll"),
+	ALIAS(MSYSCLK, NULL, "fclk"),
+};
+
+/*
+ * fixed rate clocks generated outside the soc
+ * Only necessary until the devicetree-move is complete
+ */
+#define XTI	1
+struct samsung_fixed_rate_clock s3c2412_common_frate_clks[] __initdata = {
+	FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0),
+	FRATE(0, "ext", NULL, CLK_IS_ROOT, 0),
+};
+
+static void __init s3c2412_common_clk_register_fixed_ext(
+		struct samsung_clk_provider *ctx,
+		unsigned long xti_f, unsigned long ext_f)
+{
+	/* xtal alias is necessary for the current cpufreq driver */
+	struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal");
+
+	s3c2412_common_frate_clks[0].fixed_rate = xti_f;
+	s3c2412_common_frate_clks[1].fixed_rate = ext_f;
+	samsung_clk_register_fixed_rate(ctx, s3c2412_common_frate_clks,
+				ARRAY_SIZE(s3c2412_common_frate_clks));
+
+	samsung_clk_register_alias(ctx, &xti_alias, 1);
+}
+
+void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    unsigned long ext_f, void __iomem *base)
+{
+	struct samsung_clk_provider *ctx;
+	reg_base = base;
+
+	if (np) {
+		reg_base = of_iomap(np, 0);
+		if (!reg_base)
+			panic("%s: failed to map registers\n", __func__);
+	}
+
+	ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
+
+	/* Register external clocks only in non-dt cases */
+	if (!np)
+		s3c2412_common_clk_register_fixed_ext(ctx, xti_f, ext_f);
+
+	/* Register PLLs. */
+	samsung_clk_register_pll(ctx, s3c2412_plls, ARRAY_SIZE(s3c2412_plls),
+				 reg_base);
+
+	/* Register common internal clocks. */
+	samsung_clk_register_mux(ctx, s3c2412_muxes, ARRAY_SIZE(s3c2412_muxes));
+	samsung_clk_register_div(ctx, s3c2412_dividers,
+					  ARRAY_SIZE(s3c2412_dividers));
+	samsung_clk_register_gate(ctx, s3c2412_gates,
+					ARRAY_SIZE(s3c2412_gates));
+	samsung_clk_register_fixed_factor(ctx, s3c2412_ffactor,
+					  ARRAY_SIZE(s3c2412_ffactor));
+	samsung_clk_register_alias(ctx, s3c2412_aliases,
+				   ARRAY_SIZE(s3c2412_aliases));
+
+	s3c2412_clk_sleep_init();
+}
+
+static void __init s3c2412_clk_init(struct device_node *np)
+{
+	s3c2412_common_clk_init(np, 0, 0, 0);
+}
+CLK_OF_DECLARE(s3c2412_clk, "samsung,s3c2412-clock", s3c2412_clk_init);

drivers/clk/samsung/clk-s3c2443.c

@@ -0,0 +1,466 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for S3C2443 and following SoCs.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/s3c2443.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+/* S3C2416 clock controller register offsets */
+#define LOCKCON0	0x00
+#define LOCKCON1	0x04
+#define MPLLCON		0x10
+#define EPLLCON		0x18
+#define EPLLCON_K	0x1C
+#define CLKSRC		0x20
+#define CLKDIV0		0x24
+#define CLKDIV1		0x28
+#define CLKDIV2		0x2C
+#define HCLKCON		0x30
+#define PCLKCON		0x34
+#define SCLKCON		0x38
+
+/* the soc types */
+enum supported_socs {
+	S3C2416,
+	S3C2443,
+	S3C2450,
+};
+
+/* list of PLLs to be registered */
+enum s3c2443_plls {
+	mpll, epll,
+};
+
+static void __iomem *reg_base;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *s3c2443_save;
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static unsigned long s3c2443_clk_regs[] __initdata = {
+	LOCKCON0,
+	LOCKCON1,
+	MPLLCON,
+	EPLLCON,
+	EPLLCON_K,
+	CLKSRC,
+	CLKDIV0,
+	CLKDIV1,
+	CLKDIV2,
+	PCLKCON,
+	HCLKCON,
+	SCLKCON,
+};
+
+static int s3c2443_clk_suspend(void)
+{
+	samsung_clk_save(reg_base, s3c2443_save,
+				ARRAY_SIZE(s3c2443_clk_regs));
+
+	return 0;
+}
+
+static void s3c2443_clk_resume(void)
+{
+	samsung_clk_restore(reg_base, s3c2443_save,
+				ARRAY_SIZE(s3c2443_clk_regs));
+}
+
+static struct syscore_ops s3c2443_clk_syscore_ops = {
+	.suspend = s3c2443_clk_suspend,
+	.resume = s3c2443_clk_resume,
+};
+
+static void s3c2443_clk_sleep_init(void)
+{
+	s3c2443_save = samsung_clk_alloc_reg_dump(s3c2443_clk_regs,
+						ARRAY_SIZE(s3c2443_clk_regs));
+	if (!s3c2443_save) {
+		pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+			__func__);
+		return;
+	}
+
+	register_syscore_ops(&s3c2443_clk_syscore_ops);
+	return;
+}
+#else
+static void s3c2443_clk_sleep_init(void) {}
+#endif
+
+PNAME(epllref_p) = { "mpllref", "mpllref", "xti", "ext" };
+PNAME(esysclk_p) = { "epllref", "epll" };
+PNAME(mpllref_p) = { "xti", "mdivclk" };
+PNAME(msysclk_p) = { "mpllref", "mpll" };
+PNAME(armclk_p) = { "armdiv" , "hclk" };
+PNAME(i2s0_p) = { "div_i2s0", "ext_i2s", "epllref", "epllref" };
+
+struct samsung_mux_clock s3c2443_common_muxes[] __initdata = {
+	MUX(0, "epllref", epllref_p, CLKSRC, 7, 2),
+	MUX(ESYSCLK, "esysclk", esysclk_p, CLKSRC, 6, 1),
+	MUX(0, "mpllref", mpllref_p, CLKSRC, 3, 1),
+	MUX_A(MSYSCLK, "msysclk", msysclk_p, CLKSRC, 4, 1, "msysclk"),
+	MUX_A(ARMCLK, "armclk", armclk_p, CLKDIV0, 13, 1, "armclk"),
+	MUX(0, "mux_i2s0", i2s0_p, CLKSRC, 14, 2),
+};
+
+static struct clk_div_table hclk_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 3, .div = 4 },
+	{ /* sentinel */ },
+};
+
+static struct clk_div_table mdivclk_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 3 },
+	{ .val = 2, .div = 5 },
+	{ .val = 3, .div = 7 },
+	{ .val = 4, .div = 9 },
+	{ .val = 5, .div = 11 },
+	{ .val = 6, .div = 13 },
+	{ .val = 7, .div = 15 },
+	{ /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2443_common_dividers[] __initdata = {
+	DIV_T(0, "mdivclk", "xti", CLKDIV0, 6, 3, mdivclk_d),
+	DIV(0, "prediv", "msysclk", CLKDIV0, 4, 2),
+	DIV_T(HCLK, "hclk", "prediv", CLKDIV0, 0, 2, hclk_d),
+	DIV(PCLK, "pclk", "hclk", CLKDIV0, 2, 1),
+	DIV(0, "div_hsspi0_epll", "esysclk", CLKDIV1, 24, 2),
+	DIV(0, "div_fimd", "esysclk", CLKDIV1, 16, 8),
+	DIV(0, "div_i2s0", "esysclk", CLKDIV1, 12, 4),
+	DIV(0, "div_uart", "esysclk", CLKDIV1, 8, 4),
+	DIV(0, "div_hsmmc1", "esysclk", CLKDIV1, 6, 2),
+	DIV(0, "div_usbhost", "esysclk", CLKDIV1, 4, 2),
+};
+
+struct samsung_gate_clock s3c2443_common_gates[] __initdata = {
+	GATE(SCLK_HSMMC_EXT, "sclk_hsmmcext", "ext", SCLKCON, 13, 0, 0),
+	GATE(SCLK_HSMMC1, "sclk_hsmmc1", "div_hsmmc1", SCLKCON, 12, 0, 0),
+	GATE(SCLK_FIMD, "sclk_fimd", "div_fimd", SCLKCON, 10, 0, 0),
+	GATE(SCLK_I2S0, "sclk_i2s0", "mux_i2s0", SCLKCON, 9, 0, 0),
+	GATE(SCLK_UART, "sclk_uart", "div_uart", SCLKCON, 8, 0, 0),
+	GATE(SCLK_USBH, "sclk_usbhost", "div_usbhost", SCLKCON, 1, 0, 0),
+	GATE(HCLK_DRAM, "dram", "hclk", HCLKCON, 19, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_SSMC, "ssmc", "hclk", HCLKCON, 18, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_HSMMC1, "hsmmc1", "hclk", HCLKCON, 16, 0, 0),
+	GATE(HCLK_USBD, "usb-device", "hclk", HCLKCON, 12, 0, 0),
+	GATE(HCLK_USBH, "usb-host", "hclk", HCLKCON, 11, 0, 0),
+	GATE(HCLK_LCD, "lcd", "hclk", HCLKCON, 9, 0, 0),
+	GATE(HCLK_DMA5, "dma5", "hclk", HCLKCON, 5, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA4, "dma4", "hclk", HCLKCON, 4, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA3, "dma3", "hclk", HCLKCON, 3, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA2, "dma2", "hclk", HCLKCON, 2, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA1, "dma1", "hclk", HCLKCON, 1, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA0, "dma0", "hclk", HCLKCON, 0, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_GPIO, "gpio", "pclk", PCLKCON, 13, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_RTC, "rtc", "pclk", PCLKCON, 12, 0, 0),
+	GATE(PCLK_WDT, "wdt", "pclk", PCLKCON, 11, 0, 0),
+	GATE(PCLK_PWM, "pwm", "pclk", PCLKCON, 10, 0, 0),
+	GATE(PCLK_I2S0, "i2s0", "pclk", PCLKCON, 9, 0, 0),
+	GATE(PCLK_AC97, "ac97", "pclk", PCLKCON, 8, 0, 0),
+	GATE(PCLK_ADC, "adc", "pclk", PCLKCON, 7, 0, 0),
+	GATE(PCLK_SPI0, "spi0", "pclk", PCLKCON, 6, 0, 0),
+	GATE(PCLK_I2C0, "i2c0", "pclk", PCLKCON, 4, 0, 0),
+	GATE(PCLK_UART3, "uart3", "pclk", PCLKCON, 3, 0, 0),
+	GATE(PCLK_UART2, "uart2", "pclk", PCLKCON, 2, 0, 0),
+	GATE(PCLK_UART1, "uart1", "pclk", PCLKCON, 1, 0, 0),
+	GATE(PCLK_UART0, "uart0", "pclk", PCLKCON, 0, 0, 0),
+};
+
+struct samsung_clock_alias s3c2443_common_aliases[] __initdata = {
+	ALIAS(HCLK, NULL, "hclk"),
+	ALIAS(HCLK_SSMC, NULL, "nand"),
+	ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"),
+	ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"),
+	ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"),
+	ALIAS(PCLK_UART3, "s3c2440-uart.3", "uart"),
+	ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"),
+	ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"),
+	ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"),
+	ALIAS(PCLK_UART3, "s3c2440-uart.3", "clk_uart_baud2"),
+	ALIAS(SCLK_UART, NULL, "clk_uart_baud3"),
+	ALIAS(PCLK_PWM, NULL, "timers"),
+	ALIAS(PCLK_RTC, NULL, "rtc"),
+	ALIAS(PCLK_WDT, NULL, "watchdog"),
+	ALIAS(PCLK_ADC, NULL, "adc"),
+	ALIAS(PCLK_I2C0, "s3c2410-i2c.0", "i2c"),
+	ALIAS(HCLK_USBD, NULL, "usb-device"),
+	ALIAS(HCLK_USBH, NULL, "usb-host"),
+	ALIAS(SCLK_USBH, NULL, "usb-bus-host"),
+	ALIAS(PCLK_SPI0, "s3c2443-spi.0", "spi"),
+	ALIAS(PCLK_SPI0, "s3c2443-spi.0", "spi_busclk0"),
+	ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "hsmmc"),
+	ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.0"),
+	ALIAS(PCLK_I2S0, "samsung-i2s.0", "iis"),
+	ALIAS(SCLK_I2S0, NULL, "i2s-if"),
+	ALIAS(HCLK_LCD, NULL, "lcd"),
+	ALIAS(SCLK_FIMD, NULL, "sclk_fimd"),
+};
+
+/* S3C2416 specific clocks */
+
+static struct samsung_pll_clock s3c2416_pll_clks[] __initdata = {
+	[mpll] = PLL(pll_6552_s3c2416, 0, "mpll", "mpllref",
+						LOCKCON0, MPLLCON, NULL),
+	[epll] = PLL(pll_6553, 0, "epll", "epllref",
+						LOCKCON1, EPLLCON, NULL),
+};
+
+PNAME(s3c2416_hsmmc0_p) = { "sclk_hsmmc0", "sclk_hsmmcext" };
+PNAME(s3c2416_hsmmc1_p) = { "sclk_hsmmc1", "sclk_hsmmcext" };
+PNAME(s3c2416_hsspi0_p) = { "hsspi0_epll", "hsspi0_mpll" };
+
+static struct clk_div_table armdiv_s3c2416_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 3 },
+	{ .val = 3, .div = 4 },
+	{ .val = 5, .div = 6 },
+	{ .val = 7, .div = 8 },
+	{ /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2416_dividers[] __initdata = {
+	DIV_T(ARMDIV, "armdiv", "msysclk", CLKDIV0, 9, 3, armdiv_s3c2416_d),
+	DIV(0, "div_hsspi0_mpll", "msysclk", CLKDIV2, 0, 4),
+	DIV(0, "div_hsmmc0", "esysclk", CLKDIV2, 6, 2),
+};
+
+struct samsung_mux_clock s3c2416_muxes[] __initdata = {
+	MUX(MUX_HSMMC0, "mux_hsmmc0", s3c2416_hsmmc0_p, CLKSRC, 16, 1),
+	MUX(MUX_HSMMC1, "mux_hsmmc1", s3c2416_hsmmc1_p, CLKSRC, 17, 1),
+	MUX(MUX_HSSPI0, "mux_hsspi0", s3c2416_hsspi0_p, CLKSRC, 18, 1),
+};
+
+struct samsung_gate_clock s3c2416_gates[] __initdata = {
+	GATE(0, "hsspi0_mpll", "div_hsspi0_mpll", SCLKCON, 19, 0, 0),
+	GATE(0, "hsspi0_epll", "div_hsspi0_epll", SCLKCON, 14, 0, 0),
+	GATE(0, "sclk_hsmmc0", "div_hsmmc0", SCLKCON, 6, 0, 0),
+	GATE(HCLK_2D, "2d", "hclk", HCLKCON, 20, 0, 0),
+	GATE(HCLK_HSMMC0, "hsmmc0", "hclk", HCLKCON, 15, 0, 0),
+	GATE(HCLK_IROM, "irom", "hclk", HCLKCON, 13, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_PCM, "pcm", "pclk", PCLKCON, 19, 0, 0),
+};
+
+struct samsung_clock_alias s3c2416_aliases[] __initdata = {
+	ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "hsmmc"),
+	ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "mmc_busclk.0"),
+	ALIAS(MUX_HSMMC0, "s3c-sdhci.0", "mmc_busclk.2"),
+	ALIAS(MUX_HSMMC1, "s3c-sdhci.1", "mmc_busclk.2"),
+	ALIAS(MUX_HSSPI0, "s3c2443-spi.0", "spi_busclk2"),
+	ALIAS(ARMDIV, NULL, "armdiv"),
+};
+
+/* S3C2443 specific clocks */
+
+static struct samsung_pll_clock s3c2443_pll_clks[] __initdata = {
+	[mpll] = PLL(pll_3000, 0, "mpll", "mpllref",
+						LOCKCON0, MPLLCON, NULL),
+	[epll] = PLL(pll_2126, 0, "epll", "epllref",
+						LOCKCON1, EPLLCON, NULL),
+};
+
+static struct clk_div_table armdiv_s3c2443_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 8, .div = 2 },
+	{ .val = 2, .div = 3 },
+	{ .val = 9, .div = 4 },
+	{ .val = 10, .div = 6 },
+	{ .val = 11, .div = 8 },
+	{ .val = 13, .div = 12 },
+	{ .val = 15, .div = 16 },
+	{ /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2443_dividers[] __initdata = {
+	DIV_T(ARMDIV, "armdiv", "msysclk", CLKDIV0, 9, 4, armdiv_s3c2443_d),
+	DIV(0, "div_cam", "esysclk", CLKDIV1, 26, 4),
+};
+
+struct samsung_gate_clock s3c2443_gates[] __initdata = {
+	GATE(SCLK_HSSPI0, "sclk_hsspi0", "div_hsspi0_epll", SCLKCON, 14, 0, 0),
+	GATE(SCLK_CAM, "sclk_cam", "div_cam", SCLKCON, 11, 0, 0),
+	GATE(HCLK_CFC, "cfc", "hclk", HCLKCON, 17, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_CAM, "cam", "hclk", HCLKCON, 8, 0, 0),
+	GATE(PCLK_SPI1, "spi1", "pclk", PCLKCON, 15, 0, 0),
+	GATE(PCLK_SDI, "sdi", "pclk", PCLKCON, 5, 0, 0),
+};
+
+struct samsung_clock_alias s3c2443_aliases[] __initdata = {
+	ALIAS(SCLK_HSSPI0, "s3c2443-spi.0", "spi_busclk2"),
+	ALIAS(SCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.2"),
+	ALIAS(SCLK_CAM, NULL, "camif-upll"),
+	ALIAS(PCLK_SPI1, "s3c2410-spi.0", "spi"),
+	ALIAS(PCLK_SDI, NULL, "sdi"),
+	ALIAS(HCLK_CFC, NULL, "cfc"),
+	ALIAS(ARMDIV, NULL, "armdiv"),
+};
+
+/* S3C2450 specific clocks */
+
+PNAME(s3c2450_cam_p) = { "div_cam", "hclk" };
+PNAME(s3c2450_hsspi1_p) = { "hsspi1_epll", "hsspi1_mpll" };
+PNAME(i2s1_p) = { "div_i2s1", "ext_i2s", "epllref", "epllref" };
+
+struct samsung_div_clock s3c2450_dividers[] __initdata = {
+	DIV(0, "div_cam", "esysclk", CLKDIV1, 26, 4),
+	DIV(0, "div_hsspi1_epll", "esysclk", CLKDIV2, 24, 2),
+	DIV(0, "div_hsspi1_mpll", "msysclk", CLKDIV2, 16, 4),
+	DIV(0, "div_i2s1", "esysclk", CLKDIV2, 12, 4),
+};
+
+struct samsung_mux_clock s3c2450_muxes[] __initdata = {
+	MUX(0, "mux_cam", s3c2450_cam_p, CLKSRC, 20, 1),
+	MUX(MUX_HSSPI1, "mux_hsspi1", s3c2450_hsspi1_p, CLKSRC, 19, 1),
+	MUX(0, "mux_i2s1", i2s1_p, CLKSRC, 12, 2),
+};
+
+struct samsung_gate_clock s3c2450_gates[] __initdata = {
+	GATE(SCLK_I2S1, "sclk_i2s1", "div_i2s1", SCLKCON, 5, 0, 0),
+	GATE(HCLK_CFC, "cfc", "hclk", HCLKCON, 17, 0, 0),
+	GATE(HCLK_CAM, "cam", "hclk", HCLKCON, 8, 0, 0),
+	GATE(HCLK_DMA7, "dma7", "hclk", HCLKCON, 7, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA6, "dma6", "hclk", HCLKCON, 6, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_I2S1, "i2s1", "pclk", PCLKCON, 17, 0, 0),
+	GATE(PCLK_I2C1, "i2c1", "pclk", PCLKCON, 16, 0, 0),
+	GATE(PCLK_SPI1, "spi1", "pclk", PCLKCON, 14, 0, 0),
+};
+
+struct samsung_clock_alias s3c2450_aliases[] __initdata = {
+	ALIAS(PCLK_SPI1, "s3c2443-spi.1", "spi"),
+	ALIAS(PCLK_SPI1, "s3c2443-spi.1", "spi_busclk0"),
+	ALIAS(MUX_HSSPI1, "s3c2443-spi.1", "spi_busclk2"),
+	ALIAS(PCLK_I2C1, "s3c2410-i2c.1", "i2c"),
+};
+
+/*
+ * fixed rate clocks generated outside the soc
+ * Only necessary until the devicetree-move is complete
+ */
+struct samsung_fixed_rate_clock s3c2443_common_frate_clks[] __initdata = {
+	FRATE(0, "xti", NULL, CLK_IS_ROOT, 0),
+	FRATE(0, "ext", NULL, CLK_IS_ROOT, 0),
+	FRATE(0, "ext_i2s", NULL, CLK_IS_ROOT, 0),
+	FRATE(0, "ext_uart", NULL, CLK_IS_ROOT, 0),
+};
+
+static void __init s3c2443_common_clk_register_fixed_ext(
+		struct samsung_clk_provider *ctx, unsigned long xti_f)
+{
+	s3c2443_common_frate_clks[0].fixed_rate = xti_f;
+	samsung_clk_register_fixed_rate(ctx, s3c2443_common_frate_clks,
+				ARRAY_SIZE(s3c2443_common_frate_clks));
+}
+
+void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    int current_soc,
+				    void __iomem *base)
+{
+	struct samsung_clk_provider *ctx;
+	reg_base = base;
+
+	if (np) {
+		reg_base = of_iomap(np, 0);
+		if (!reg_base)
+			panic("%s: failed to map registers\n", __func__);
+	}
+
+	ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
+
+	/* Register external clocks only in non-dt cases */
+	if (!np)
+		s3c2443_common_clk_register_fixed_ext(ctx, xti_f);
+
+	/* Register PLLs. */
+	if (current_soc == S3C2416 || current_soc == S3C2450)
+		samsung_clk_register_pll(ctx, s3c2416_pll_clks,
+				ARRAY_SIZE(s3c2416_pll_clks), reg_base);
+	else
+		samsung_clk_register_pll(ctx, s3c2443_pll_clks,
+				ARRAY_SIZE(s3c2443_pll_clks), reg_base);
+
+	/* Register common internal clocks. */
+	samsung_clk_register_mux(ctx, s3c2443_common_muxes,
+			ARRAY_SIZE(s3c2443_common_muxes));
+	samsung_clk_register_div(ctx, s3c2443_common_dividers,
+			ARRAY_SIZE(s3c2443_common_dividers));
+	samsung_clk_register_gate(ctx, s3c2443_common_gates,
+		ARRAY_SIZE(s3c2443_common_gates));
+	samsung_clk_register_alias(ctx, s3c2443_common_aliases,
+		ARRAY_SIZE(s3c2443_common_aliases));
+
+	/* Register SoC-specific clocks. */
+	switch (current_soc) {
+	case S3C2450:
+		samsung_clk_register_div(ctx, s3c2450_dividers,
+				ARRAY_SIZE(s3c2450_dividers));
+		samsung_clk_register_mux(ctx, s3c2450_muxes,
+				ARRAY_SIZE(s3c2450_muxes));
+		samsung_clk_register_gate(ctx, s3c2450_gates,
+				ARRAY_SIZE(s3c2450_gates));
+		samsung_clk_register_alias(ctx, s3c2450_aliases,
+				ARRAY_SIZE(s3c2450_aliases));
+		/* fall through, as s3c2450 extends the s3c2416 clocks */
+	case S3C2416:
+		samsung_clk_register_div(ctx, s3c2416_dividers,
+				ARRAY_SIZE(s3c2416_dividers));
+		samsung_clk_register_mux(ctx, s3c2416_muxes,
+				ARRAY_SIZE(s3c2416_muxes));
+		samsung_clk_register_gate(ctx, s3c2416_gates,
+				ARRAY_SIZE(s3c2416_gates));
+		samsung_clk_register_alias(ctx, s3c2416_aliases,
+				ARRAY_SIZE(s3c2416_aliases));
+		break;
+	case S3C2443:
+		samsung_clk_register_div(ctx, s3c2443_dividers,
+				ARRAY_SIZE(s3c2443_dividers));
+		samsung_clk_register_gate(ctx, s3c2443_gates,
+				ARRAY_SIZE(s3c2443_gates));
+		samsung_clk_register_alias(ctx, s3c2443_aliases,
+				ARRAY_SIZE(s3c2443_aliases));
+		break;
+	}
+
+	s3c2443_clk_sleep_init();
+}
+
+static void __init s3c2416_clk_init(struct device_node *np)
+{
+	s3c2443_common_clk_init(np, 0, S3C2416, 0);
+}
+CLK_OF_DECLARE(s3c2416_clk, "samsung,s3c2416-clock", s3c2416_clk_init);
+
+static void __init s3c2443_clk_init(struct device_node *np)
+{
+	s3c2443_common_clk_init(np, 0, S3C2443, 0);
+}
+CLK_OF_DECLARE(s3c2443_clk, "samsung,s3c2443-clock", s3c2443_clk_init);
+
+static void __init s3c2450_clk_init(struct device_node *np)
+{
+	s3c2443_common_clk_init(np, 0, S3C2450, 0);
+}
+CLK_OF_DECLARE(s3c2450_clk, "samsung,s3c2450-clock", s3c2450_clk_init);

drivers/clk/samsung/clk-s3c64xx.c

@@ -442,12 +442,14 @@ static struct samsung_clock_alias s3c6410_clock_aliases[] = {
 	ALIAS(MEM0_SROM, NULL, "srom"),
 };
 
-static void __init s3c64xx_clk_register_fixed_ext(unsigned long fin_pll_f,
-							unsigned long xusbxti_f)
+static void __init s3c64xx_clk_register_fixed_ext(
+				struct samsung_clk_provider *ctx,
+				unsigned long fin_pll_f,
+				unsigned long xusbxti_f)
 {
 	s3c64xx_fixed_rate_ext_clks[0].fixed_rate = fin_pll_f;
 	s3c64xx_fixed_rate_ext_clks[1].fixed_rate = xusbxti_f;
-	samsung_clk_register_fixed_rate(s3c64xx_fixed_rate_ext_clks,
+	samsung_clk_register_fixed_rate(ctx, s3c64xx_fixed_rate_ext_clks,
 				ARRAY_SIZE(s3c64xx_fixed_rate_ext_clks));
 }
 
@@ -456,6 +458,8 @@ void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
 			     unsigned long xusbxti_f, bool s3c6400,
 			     void __iomem *base)
 {
+	struct samsung_clk_provider *ctx;
+
 	reg_base = base;
 	is_s3c6400 = s3c6400;
 
@@ -465,48 +469,50 @@ void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
 			panic("%s: failed to map registers\n", __func__);
 	}
 
-	samsung_clk_init(np, reg_base, NR_CLKS);
+	ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
 
 	/* Register external clocks. */
 	if (!np)
-		s3c64xx_clk_register_fixed_ext(xtal_f, xusbxti_f);
+		s3c64xx_clk_register_fixed_ext(ctx, xtal_f, xusbxti_f);
 
 	/* Register PLLs. */
-	samsung_clk_register_pll(s3c64xx_pll_clks,
+	samsung_clk_register_pll(ctx, s3c64xx_pll_clks,
 				ARRAY_SIZE(s3c64xx_pll_clks), reg_base);
 
 	/* Register common internal clocks. */
-	samsung_clk_register_fixed_rate(s3c64xx_fixed_rate_clks,
+	samsung_clk_register_fixed_rate(ctx, s3c64xx_fixed_rate_clks,
 					ARRAY_SIZE(s3c64xx_fixed_rate_clks));
-	samsung_clk_register_mux(s3c64xx_mux_clks,
+	samsung_clk_register_mux(ctx, s3c64xx_mux_clks,
 					ARRAY_SIZE(s3c64xx_mux_clks));
-	samsung_clk_register_div(s3c64xx_div_clks,
+	samsung_clk_register_div(ctx, s3c64xx_div_clks,
 					ARRAY_SIZE(s3c64xx_div_clks));
-	samsung_clk_register_gate(s3c64xx_gate_clks,
+	samsung_clk_register_gate(ctx, s3c64xx_gate_clks,
 					ARRAY_SIZE(s3c64xx_gate_clks));
 
 	/* Register SoC-specific clocks. */
 	if (is_s3c6400) {
-		samsung_clk_register_mux(s3c6400_mux_clks,
+		samsung_clk_register_mux(ctx, s3c6400_mux_clks,
 					ARRAY_SIZE(s3c6400_mux_clks));
-		samsung_clk_register_div(s3c6400_div_clks,
+		samsung_clk_register_div(ctx, s3c6400_div_clks,
 					ARRAY_SIZE(s3c6400_div_clks));
-		samsung_clk_register_gate(s3c6400_gate_clks,
+		samsung_clk_register_gate(ctx, s3c6400_gate_clks,
 					ARRAY_SIZE(s3c6400_gate_clks));
-		samsung_clk_register_alias(s3c6400_clock_aliases,
+		samsung_clk_register_alias(ctx, s3c6400_clock_aliases,
 					ARRAY_SIZE(s3c6400_clock_aliases));
 	} else {
-		samsung_clk_register_mux(s3c6410_mux_clks,
+		samsung_clk_register_mux(ctx, s3c6410_mux_clks,
 					ARRAY_SIZE(s3c6410_mux_clks));
-		samsung_clk_register_div(s3c6410_div_clks,
+		samsung_clk_register_div(ctx, s3c6410_div_clks,
 					ARRAY_SIZE(s3c6410_div_clks));
-		samsung_clk_register_gate(s3c6410_gate_clks,
+		samsung_clk_register_gate(ctx, s3c6410_gate_clks,
 					ARRAY_SIZE(s3c6410_gate_clks));
-		samsung_clk_register_alias(s3c6410_clock_aliases,
+		samsung_clk_register_alias(ctx, s3c6410_clock_aliases,
 					ARRAY_SIZE(s3c6410_clock_aliases));
 	}
 
-	samsung_clk_register_alias(s3c64xx_clock_aliases,
+	samsung_clk_register_alias(ctx, s3c64xx_clock_aliases,
 					ARRAY_SIZE(s3c64xx_clock_aliases));
 	s3c64xx_clk_sleep_init();
 

drivers/clk/samsung/clk.c

@@ -14,13 +14,6 @@
 #include <linux/syscore_ops.h>
 #include "clk.h"
 
-static DEFINE_SPINLOCK(lock);
-static struct clk **clk_table;
-static void __iomem *reg_base;
-#ifdef CONFIG_OF
-static struct clk_onecell_data clk_data;
-#endif
-
 void samsung_clk_save(void __iomem *base,
 				    struct samsung_clk_reg_dump *rd,
 				    unsigned int num_regs)
@@ -55,40 +48,58 @@ struct samsung_clk_reg_dump *samsung_clk_alloc_reg_dump(
 }
 
 /* setup the essentials required to support clock lookup using ccf */
-void __init samsung_clk_init(struct device_node *np, void __iomem *base,
-			     unsigned long nr_clks)
+struct samsung_clk_provider *__init samsung_clk_init(struct device_node *np,
+			void __iomem *base, unsigned long nr_clks)
 {
-	reg_base = base;
+	struct samsung_clk_provider *ctx;
+	struct clk **clk_table;
+	int ret;
+	int i;
 
-	clk_table = kzalloc(sizeof(struct clk *) * nr_clks, GFP_KERNEL);
+	ctx = kzalloc(sizeof(struct samsung_clk_provider), GFP_KERNEL);
+	if (!ctx)
+		panic("could not allocate clock provider context.\n");
+
+	clk_table = kcalloc(nr_clks, sizeof(struct clk *), GFP_KERNEL);
 	if (!clk_table)
 		panic("could not allocate clock lookup table\n");
 
+	for (i = 0; i < nr_clks; ++i)
+		clk_table[i] = ERR_PTR(-ENOENT);
+
+	ctx->reg_base = base;
+	ctx->clk_data.clks = clk_table;
+	ctx->clk_data.clk_num = nr_clks;
+	spin_lock_init(&ctx->lock);
+
 	if (!np)
-		return;
+		return ctx;
 
-#ifdef CONFIG_OF
-	clk_data.clks = clk_table;
-	clk_data.clk_num = nr_clks;
-	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-#endif
+	ret = of_clk_add_provider(np, of_clk_src_onecell_get,
+			&ctx->clk_data);
+	if (ret)
+		panic("could not register clock provide\n");
+
+	return ctx;
 }
 
 /* add a clock instance to the clock lookup table used for dt based lookup */
-void samsung_clk_add_lookup(struct clk *clk, unsigned int id)
+void samsung_clk_add_lookup(struct samsung_clk_provider *ctx, struct clk *clk,
+				unsigned int id)
 {
-	if (clk_table && id)
-		clk_table[id] = clk;
+	if (ctx->clk_data.clks && id)
+		ctx->clk_data.clks[id] = clk;
 }
 
 /* register a list of aliases */
-void __init samsung_clk_register_alias(struct samsung_clock_alias *list,
-					unsigned int nr_clk)
+void __init samsung_clk_register_alias(struct samsung_clk_provider *ctx,
+				struct samsung_clock_alias *list,
+				unsigned int nr_clk)
 {
 	struct clk *clk;
 	unsigned int idx, ret;
 
-	if (!clk_table) {
+	if (!ctx->clk_data.clks) {
 		pr_err("%s: clock table missing\n", __func__);
 		return;
 	}
@@ -100,7 +111,7 @@ void __init samsung_clk_register_alias(struct samsung_clock_alias *list,
 			continue;
 		}
 
-		clk = clk_table[list->id];
+		clk = ctx->clk_data.clks[list->id];
 		if (!clk) {
 			pr_err("%s: failed to find clock %d\n", __func__,
 				list->id);
@@ -115,7 +126,7 @@ void __init samsung_clk_register_alias(struct samsung_clock_alias *list,
 }
 
 /* register a list of fixed clocks */
-void __init samsung_clk_register_fixed_rate(
+void __init samsung_clk_register_fixed_rate(struct samsung_clk_provider *ctx,
 		struct samsung_fixed_rate_clock *list, unsigned int nr_clk)
 {
 	struct clk *clk;
@@ -130,7 +141,7 @@ void __init samsung_clk_register_fixed_rate(
 			continue;
 		}
 
-		samsung_clk_add_lookup(clk, list->id);
+		samsung_clk_add_lookup(ctx, clk, list->id);
 
 		/*
 		 * Unconditionally add a clock lookup for the fixed rate clocks.
@@ -144,7 +155,7 @@ void __init samsung_clk_register_fixed_rate(
 }
 
 /* register a list of fixed factor clocks */
-void __init samsung_clk_register_fixed_factor(
+void __init samsung_clk_register_fixed_factor(struct samsung_clk_provider *ctx,
 		struct samsung_fixed_factor_clock *list, unsigned int nr_clk)
 {
 	struct clk *clk;
@@ -159,28 +170,30 @@ void __init samsung_clk_register_fixed_factor(
 			continue;
 		}
 
-		samsung_clk_add_lookup(clk, list->id);
+		samsung_clk_add_lookup(ctx, clk, list->id);
 	}
 }
 
 /* register a list of mux clocks */
-void __init samsung_clk_register_mux(struct samsung_mux_clock *list,
-					unsigned int nr_clk)
+void __init samsung_clk_register_mux(struct samsung_clk_provider *ctx,
+				struct samsung_mux_clock *list,
+				unsigned int nr_clk)
 {
 	struct clk *clk;
 	unsigned int idx, ret;
 
 	for (idx = 0; idx < nr_clk; idx++, list++) {
 		clk = clk_register_mux(NULL, list->name, list->parent_names,
-			list->num_parents, list->flags, reg_base + list->offset,
-			list->shift, list->width, list->mux_flags, &lock);
+			list->num_parents, list->flags,
+			ctx->reg_base + list->offset,
+			list->shift, list->width, list->mux_flags, &ctx->lock);
 		if (IS_ERR(clk)) {
 			pr_err("%s: failed to register clock %s\n", __func__,
 				list->name);
 			continue;
 		}
 
-		samsung_clk_add_lookup(clk, list->id);
+		samsung_clk_add_lookup(ctx, clk, list->id);
 
 		/* register a clock lookup only if a clock alias is specified */
 		if (list->alias) {
@@ -194,8 +207,9 @@ void __init samsung_clk_register_mux(struct samsung_mux_clock *list,
 }
 
 /* register a list of div clocks */
-void __init samsung_clk_register_div(struct samsung_div_clock *list,
-					unsigned int nr_clk)
+void __init samsung_clk_register_div(struct samsung_clk_provider *ctx,
+				struct samsung_div_clock *list,
+				unsigned int nr_clk)
 {
 	struct clk *clk;
 	unsigned int idx, ret;
@@ -203,22 +217,22 @@ void __init samsung_clk_register_div(struct samsung_div_clock *list,
 	for (idx = 0; idx < nr_clk; idx++, list++) {
 		if (list->table)
 			clk = clk_register_divider_table(NULL, list->name,
-					list->parent_name, list->flags,
-					reg_base + list->offset, list->shift,
-					list->width, list->div_flags,
-					list->table, &lock);
+				list->parent_name, list->flags,
+				ctx->reg_base + list->offset,
+				list->shift, list->width, list->div_flags,
+				list->table, &ctx->lock);
 		else
 			clk = clk_register_divider(NULL, list->name,
-					list->parent_name, list->flags,
-					reg_base + list->offset, list->shift,
-					list->width, list->div_flags, &lock);
+				list->parent_name, list->flags,
+				ctx->reg_base + list->offset, list->shift,
+				list->width, list->div_flags, &ctx->lock);
 		if (IS_ERR(clk)) {
 			pr_err("%s: failed to register clock %s\n", __func__,
 				list->name);
 			continue;
 		}
 
-		samsung_clk_add_lookup(clk, list->id);
+		samsung_clk_add_lookup(ctx, clk, list->id);
 
 		/* register a clock lookup only if a clock alias is specified */
 		if (list->alias) {
@@ -232,16 +246,17 @@ void __init samsung_clk_register_div(struct samsung_div_clock *list,
 }
 
 /* register a list of gate clocks */
-void __init samsung_clk_register_gate(struct samsung_gate_clock *list,
-						unsigned int nr_clk)
+void __init samsung_clk_register_gate(struct samsung_clk_provider *ctx,
+				struct samsung_gate_clock *list,
+				unsigned int nr_clk)
 {
 	struct clk *clk;
 	unsigned int idx, ret;
 
 	for (idx = 0; idx < nr_clk; idx++, list++) {
 		clk = clk_register_gate(NULL, list->name, list->parent_name,
-				list->flags, reg_base + list->offset,
-				list->bit_idx, list->gate_flags, &lock);
+				list->flags, ctx->reg_base + list->offset,
+				list->bit_idx, list->gate_flags, &ctx->lock);
 		if (IS_ERR(clk)) {
 			pr_err("%s: failed to register clock %s\n", __func__,
 				list->name);
@@ -257,7 +272,7 @@ void __init samsung_clk_register_gate(struct samsung_gate_clock *list,
 					__func__, list->alias);
 		}
 
-		samsung_clk_add_lookup(clk, list->id);
+		samsung_clk_add_lookup(ctx, clk, list->id);
 	}
 }
 
@@ -266,21 +281,21 @@ void __init samsung_clk_register_gate(struct samsung_gate_clock *list,
  * tree and register it
  */
 #ifdef CONFIG_OF
-void __init samsung_clk_of_register_fixed_ext(
+void __init samsung_clk_of_register_fixed_ext(struct samsung_clk_provider *ctx,
 			struct samsung_fixed_rate_clock *fixed_rate_clk,
 			unsigned int nr_fixed_rate_clk,
 			struct of_device_id *clk_matches)
 {
 	const struct of_device_id *match;
-	struct device_node *np;
+	struct device_node *clk_np;
 	u32 freq;
 
-	for_each_matching_node_and_match(np, clk_matches, &match) {
-		if (of_property_read_u32(np, "clock-frequency", &freq))
+	for_each_matching_node_and_match(clk_np, clk_matches, &match) {
+		if (of_property_read_u32(clk_np, "clock-frequency", &freq))
 			continue;
-		fixed_rate_clk[(u32)match->data].fixed_rate = freq;
+		fixed_rate_clk[(unsigned long)match->data].fixed_rate = freq;
 	}
-	samsung_clk_register_fixed_rate(fixed_rate_clk, nr_fixed_rate_clk);
+	samsung_clk_register_fixed_rate(ctx, fixed_rate_clk, nr_fixed_rate_clk);
 }
 #endif
 

drivers/clk/samsung/clk.h

@@ -21,6 +21,18 @@
 #include <linux/of_address.h>
 #include "clk-pll.h"
 
+/**
+ * struct samsung_clk_provider: information about clock provider
+ * @reg_base: virtual address for the register base.
+ * @clk_data: holds clock related data like clk* and number of clocks.
+ * @lock: maintains exclusion bwtween callbacks for a given clock-provider.
+ */
+struct samsung_clk_provider {
+	void __iomem *reg_base;
+	struct clk_onecell_data clk_data;
+	spinlock_t lock;
+};
+
 /**
  * struct samsung_clock_alias: information about mux clock
  * @id: platform specific id of the clock.
@@ -312,40 +324,52 @@ struct samsung_pll_clock {
 	__PLL(_typ, _id, NULL, _name, _pname, CLK_GET_RATE_NOCACHE,	\
 		_lock, _con, _rtable, _alias)
 
-extern void __init samsung_clk_init(struct device_node *np, void __iomem *base,
-				    unsigned long nr_clks);
+extern struct samsung_clk_provider *__init samsung_clk_init(
+			struct device_node *np, void __iomem *base,
+			unsigned long nr_clks);
 extern void __init samsung_clk_of_register_fixed_ext(
-		struct samsung_fixed_rate_clock *fixed_rate_clk,
-		unsigned int nr_fixed_rate_clk,
-		struct of_device_id *clk_matches);
+			struct samsung_clk_provider *ctx,
+			struct samsung_fixed_rate_clock *fixed_rate_clk,
+			unsigned int nr_fixed_rate_clk,
+			struct of_device_id *clk_matches);
 
-extern void samsung_clk_add_lookup(struct clk *clk, unsigned int id);
+extern void samsung_clk_add_lookup(struct samsung_clk_provider *ctx,
+			struct clk *clk, unsigned int id);
 
-extern void samsung_clk_register_alias(struct samsung_clock_alias *list,
-		unsigned int nr_clk);
+extern void samsung_clk_register_alias(struct samsung_clk_provider *ctx,
+			struct samsung_clock_alias *list,
+			unsigned int nr_clk);
 extern void __init samsung_clk_register_fixed_rate(
-		struct samsung_fixed_rate_clock *clk_list, unsigned int nr_clk);
+			struct samsung_clk_provider *ctx,
+			struct samsung_fixed_rate_clock *clk_list,
+			unsigned int nr_clk);
 extern void __init samsung_clk_register_fixed_factor(
-		struct samsung_fixed_factor_clock *list, unsigned int nr_clk);
-extern void __init samsung_clk_register_mux(struct samsung_mux_clock *clk_list,
-		unsigned int nr_clk);
-extern void __init samsung_clk_register_div(struct samsung_div_clock *clk_list,
-		unsigned int nr_clk);
-extern void __init samsung_clk_register_gate(
-		struct samsung_gate_clock *clk_list, unsigned int nr_clk);
-extern void __init samsung_clk_register_pll(struct samsung_pll_clock *pll_list,
-		unsigned int nr_clk, void __iomem *base);
+			struct samsung_clk_provider *ctx,
+			struct samsung_fixed_factor_clock *list,
+			unsigned int nr_clk);
+extern void __init samsung_clk_register_mux(struct samsung_clk_provider *ctx,
+			struct samsung_mux_clock *clk_list,
+			unsigned int nr_clk);
+extern void __init samsung_clk_register_div(struct samsung_clk_provider *ctx,
+			struct samsung_div_clock *clk_list,
+			unsigned int nr_clk);
+extern void __init samsung_clk_register_gate(struct samsung_clk_provider *ctx,
+			struct samsung_gate_clock *clk_list,
+			unsigned int nr_clk);
+extern void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx,
+			struct samsung_pll_clock *pll_list,
+			unsigned int nr_clk, void __iomem *base);
 
 extern unsigned long _get_rate(const char *clk_name);
 
 extern void samsung_clk_save(void __iomem *base,
-			     struct samsung_clk_reg_dump *rd,
-			     unsigned int num_regs);
+			struct samsung_clk_reg_dump *rd,
+			unsigned int num_regs);
 extern void samsung_clk_restore(void __iomem *base,
-				const struct samsung_clk_reg_dump *rd,
-				unsigned int num_regs);
+			const struct samsung_clk_reg_dump *rd,
+			unsigned int num_regs);
 extern struct samsung_clk_reg_dump *samsung_clk_alloc_reg_dump(
-						const unsigned long *rdump,
-						unsigned long nr_rdump);
+			const unsigned long *rdump,
+			unsigned long nr_rdump);
 
 #endif /* __SAMSUNG_CLK_H */

drivers/cpufreq/s3c24xx-cpufreq.c

@@ -141,6 +141,7 @@ static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
 
 static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
 {
+	cfg->mpll = _clk_mpll;
 	(cfg->info->set_fvco)(cfg);
 }
 

drivers/cpuidle/Kconfig.arm

@@ -44,3 +44,9 @@ config ARM_AT91_CPUIDLE
 	depends on ARCH_AT91
 	help
 	  Select this to enable cpuidle for AT91 processors
+
+config ARM_EXYNOS_CPUIDLE
+	bool "Cpu Idle Driver for the Exynos processors"
+	depends on ARCH_EXYNOS
+	help
+	  Select this to enable cpuidle for Exynos processors

drivers/cpuidle/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_ARM_KIRKWOOD_CPUIDLE)	+= cpuidle-kirkwood.o
 obj-$(CONFIG_ARM_ZYNQ_CPUIDLE)		+= cpuidle-zynq.o
 obj-$(CONFIG_ARM_U8500_CPUIDLE)         += cpuidle-ux500.o
 obj-$(CONFIG_ARM_AT91_CPUIDLE)          += cpuidle-at91.o
+obj-$(CONFIG_ARM_EXYNOS_CPUIDLE)        += cpuidle-exynos.o
 
 ###############################################################################
 # POWERPC drivers