Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits)
  powerpc/p3060qds: Add support for P3060QDS board
  powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX
  powerpc/85xx: Make kexec to interate over online cpus
  powerpc/fsl_booke: Fix comment in head_fsl_booke.S
  powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices
  powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver
  powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver
  powerpc/86xx: Correct Gianfar support for GE boards
  powerpc/cpm: Clear muram before it is in use.
  drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager
  powerpc/fsl_msi: add support for "msi-address-64" property
  powerpc/85xx: Setup secondary cores PIR with hard SMP id
  powerpc/fsl-booke: Fix settlbcam for 64-bit
  powerpc/85xx: Adding DCSR node to dtsi device trees
  powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards
  powerpc/85xx: fix PHYS_64BIT selection for P1022DS
  powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map
  powerpc: respect mem= setting for early memory limit setup
  powerpc: Update corenet64_smp_defconfig
  powerpc: Update mpc85xx/corenet 32-bit defconfigs
  ...

Fix up trivial conflicts in:
 - arch/powerpc/configs/40x/hcu4_defconfig
	removed stale file, edited elsewhere
 - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c:
	added opal and gelic drivers vs added ePAPR driver
 - drivers/tty/serial/8250.c
	moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support

Documentation/devicetree/bindings/powerpc/fsl/board.txt

@@ -1,3 +1,8 @@
+Freescale Reference Board Bindings
+
+This document describes device tree bindings for various devices that
+exist on some Freescale reference boards.
+
 * Board Control and Status (BCSR)
 
 Required properties:
@@ -12,25 +17,26 @@ Example:
 		reg = <f8000000 8000>;
 	};
 
-* Freescale on board FPGA
+* Freescale on-board FPGA
 
 This is the memory-mapped registers for on board FPGA.
 
 Required properities:
-- compatible : should be "fsl,fpga-pixis".
-- reg : should contain the address and the length of the FPPGA register
-  set.
+- compatible: should be a board-specific string followed by a string
+  indicating the type of FPGA.  Example:
+	"fsl,<board>-fpga", "fsl,fpga-pixis"
+- reg: should contain the address and the length of the FPGA register set.
 - interrupt-parent: should specify phandle for the interrupt controller.
-- interrupts : should specify event (wakeup) IRQ.
+- interrupts: should specify event (wakeup) IRQ.
 
-Example (MPC8610HPCD):
+Example (P1022DS):
 
-	board-control@e8000000 {
-		compatible = "fsl,fpga-pixis";
-		reg = <0xe8000000 32>;
-		interrupt-parent = <&mpic>;
-		interrupts = <8 8>;
-	};
+	 board-control@3,0 {
+		 compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
+		 reg = <3 0 0x30>;
+		 interrupt-parent = <&mpic>;
+		 interrupts = <8 8 0 0>;
+	 };
 
 * Freescale BCSR GPIO banks
 

Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt

@@ -0,0 +1,395 @@
+===================================================================
+Debug Control and Status Register (DCSR) Binding
+Copyright 2011 Freescale Semiconductor Inc.
+
+NOTE: The bindings described in this document are preliminary and subject
+to change.  Some of the compatible strings that contain only generic names
+may turn out to be inappropriate, or need additional properties to describe
+the integration of the block with the rest of the chip.
+
+=====================================================================
+Debug Control and Status Register Memory Map
+
+Description
+
+This node defines the base address and range for the
+defined DCSR Memory Map. Child nodes will describe the individual
+debug blocks defined within this memory space.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr" and "simple-bus".
+	The DCSR space exists in the memory-mapped bus.
+
+	- #address-cells
+	Usage: required
+	Value type: <u32>
+	Definition: A standard property.  Defines the number of cells
+	or representing physical addresses in child nodes.
+
+	- #size-cells
+	Usage: required
+	Value type: <u32>
+	Definition: A standard property.  Defines the number of cells
+	or representing the size of physical addresses in
+	child nodes.
+
+	- ranges
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property. Specifies the physical address
+	range of the DCSR space.
+
+EXAMPLE
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+=====================================================================
+Event Processing Unit
+
+This node represents the region of DCSR space allocated to the EPU
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-epu"
+
+	- interrupts
+	Usage: required
+	Value type: <prop_encoded-array>
+	Definition:  Specifies the interrupts generated by the EPU.
+	The value of the interrupts property consists of three
+	interrupt specifiers. The format of the specifier is defined
+	by the binding document describing the node's interrupt parent.
+
+	The EPU counters can be configured to assert the performance
+	monitor interrupt signal based on either counter overflow or value
+	match. Which counter asserted the interrupt is captured in an EPU
+	Counter Interrupt Status Register (EPCPUISR).
+
+	The EPU unit can also be configured to assert either or both of
+	two interrupt signals based on debug event sources within the SoC.
+	The interrupt signals are epu_xt_int0 and epu_xt_int1.
+	Which event source asserted the interrupt is captured in an EPU
+	Interrupt Status Register (EPISR0,EPISR1).
+
+	Interrupt numbers are lised in order (perfmon, event0, event1).
+
+	- interrupt-parent
+	Usage: required
+	Value type: <phandle>
+	Definition: A single <phandle> value that points
+	to the interrupt parent to which the child domain
+	is being mapped. Value must be "&mpic"
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+	dcsr-epu@0 {
+		compatible = "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		interrupt-parent = <&mpic>;
+		reg = <0x0 0x1000>;
+	};
+
+=======================================================================
+Nexus Port Controller
+
+This node represents the region of DCSR space allocated to the NPC
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-npc"
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+	The Nexus Port controller occupies two regions in the DCSR space
+	with distinct functionality.
+
+	The first register range describes the Nexus Port Controller
+	control and status registers.
+
+	The second register range describes the Nexus Port Controller
+	internal trace buffer. The NPC trace buffer is a small memory buffer
+	which stages the nexus trace data for transmission via the Aurora port
+	or to a DDR based trace buffer. In some configurations the NPC trace
+	buffer can be the only trace buffer used.
+
+
+EXAMPLE
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+
+=======================================================================
+Nexus Concentrator
+
+This node represents the region of DCSR space allocated to the NXC
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-nxc"
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+=======================================================================
+CoreNet Debug Controller
+
+This node represents the region of DCSR space allocated to
+the CoreNet Debug controller.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-corenet"
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+	The CoreNet Debug controller occupies two regions in the DCSR space
+	with distinct functionality.
+
+	The first register range describes the CoreNet Debug Controller
+	functionalty to perform transaction and transaction attribute matches.
+
+	The second register range describes the CoreNet Debug Controller
+	functionalty to trigger event notifications and debug traces.
+
+EXAMPLE
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+
+=======================================================================
+Data Path Debug controller
+
+This node represents the region of DCSR space allocated to
+the DPAA Debug Controller. This controller controls debug configuration
+for the QMAN and FMAN blocks.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the SoC
+	or Debug IP of the form "fsl,<soc>-dcsr-dpaa" in addition to the
+	generic compatible string "fsl,dcsr-dpaa".
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+
+=======================================================================
+OCeaN Debug controller
+
+This node represents the region of DCSR space allocated to
+the OCN Debug Controller.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the SoC
+	or Debug IP of the form "fsl,<soc>-dcsr-ocn" in addition to the
+	generic compatible string "fsl,dcsr-ocn".
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-ocn@11000 {
+			compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+
+=======================================================================
+DDR Controller Debug controller
+
+This node represents the region of DCSR space allocated to
+the OCN Debug Controller.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-ddr"
+
+	- dev-handle
+	Usage: required
+	Definition: A phandle to associate this debug node with its
+	component controller.
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr1>;
+			reg = <0x12000 0x1000>;
+		};
+
+=======================================================================
+Nexus Aurora Link Controller
+
+This node represents the region of DCSR space allocated to
+the NAL Controller.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the SoC
+	or Debug IP of the form "fsl,<soc>-dcsr-nal" in addition to the
+	generic compatible string "fsl,dcsr-nal".
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-nal@18000 {
+			compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+
+
+=======================================================================
+Run Control and Power Management
+
+This node represents the region of DCSR space allocated to
+the RCPM Debug Controller. This functionlity is limited to the
+control the debug operations of the SoC and cores.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the SoC
+	or Debug IP of the form "fsl,<soc>-dcsr-rcpm" in addition to the
+	generic compatible string "fsl,dcsr-rcpm".
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+
+=======================================================================
+Core Service Bridge Proxy
+
+This node represents the region of DCSR space allocated to
+the Core Service Bridge Proxies.
+There is one Core Service Bridge Proxy device for each CPU in the system.
+This functionlity provides access to the debug operations of the CPU.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the cpu
+	of the form "fsl,dcsr-<cpu>-sb-proxy" in addition to the
+	generic compatible string "fsl,dcsr-cpu-sb-proxy".
+
+	- cpu-handle
+	Usage: required
+	Definition: A phandle to associate this debug node with its cpu.
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy",
+				     "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy",
+				     "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+
+=======================================================================

Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt

@@ -25,6 +25,16 @@ Required properties:
   are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed
   to MPIC.
 
+Optional properties:
+- msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register
+  is used for MSI messaging.  The address of MSIIR in PCI address space is
+  the MSI message address.
+
+  This property may be used in virtualized environments where the hypervisor
+  has created an alternate mapping for the MSIR block.  See below for an
+  explanation.
+
+
 Example:
 	msi@41600 {
 		compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
@@ -41,3 +51,35 @@ Example:
 			0xe7 0>;
 		interrupt-parent = <&mpic>;
 	};
+
+The Freescale hypervisor and msi-address-64
+-------------------------------------------
+Normally, PCI devices have access to all of CCSR via an ATMU mapping.  The
+Freescale MSI driver calculates the address of MSIIR (in the MSI register
+block) and sets that address as the MSI message address.
+
+In a virtualized environment, the hypervisor may need to create an IOMMU
+mapping for MSIIR.  The Freescale ePAPR hypervisor has this requirement
+because of hardware limitations of the Peripheral Access Management Unit
+(PAMU), which is currently the only IOMMU that the hypervisor supports.
+The ATMU is programmed with the guest physical address, and the PAMU
+intercepts transactions and reroutes them to the true physical address.
+
+In the PAMU, each PCI controller is given only one primary window.  The
+PAMU restricts DMA operations so that they can only occur within a window.
+Because PCI devices must be able to DMA to memory, the primary window must
+be used to cover all of the guest's memory space.
+
+PAMU primary windows can be divided into 256 subwindows, and each
+subwindow can have its own address mapping ("guest physical" to "true
+physical").  However, each subwindow has to have the same alignment, which
+means they cannot be located at just any address.  Because of these
+restrictions, it is usually impossible to create a 4KB subwindow that
+covers MSIIR where it's normally located.
+
+Therefore, the hypervisor has to create a subwindow inside the same
+primary window used for memory, but mapped to the MSIR block (where MSIIR
+lives).  The first subwindow after the end of guest memory is used for
+this.  The address specified in the msi-address-64 property is the PCI
+address of MSIIR.  The hypervisor configures the PAMU to map that address to
+the true physical address of MSIIR.

arch/powerpc/Kconfig

@@ -323,7 +323,7 @@ config SWIOTLB
 
 config HOTPLUG_CPU
 	bool "Support for enabling/disabling CPUs"
-	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
+	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC || PPC_POWERNV)
 	---help---
 	  Say Y here to be able to disable and re-enable individual
 	  CPUs at runtime on SMP machines.
@@ -345,7 +345,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
 
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
-	depends on (PPC_BOOK3S || FSL_BOOKE) && EXPERIMENTAL
+	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !47x)) && EXPERIMENTAL
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -429,8 +429,7 @@ config ARCH_POPULATES_NODE_MAP
 	def_bool y
 
 config SYS_SUPPORTS_HUGETLBFS
-       def_bool y
-       depends on PPC_BOOK3S_64
+	bool
 
 source "mm/Kconfig"
 

arch/powerpc/Kconfig.debug

@@ -141,9 +141,6 @@ config BOOTX_TEXT
 
 config PPC_EARLY_DEBUG
 	bool "Early debugging (dangerous)"
-	# PPC_EARLY_DEBUG on 440 leaves AS=1 mappings above the TLB high water
-	# mark, which doesn't work with current 440 KVM.
-	depends on !KVM
 	help
 	  Say Y to enable some early debugging facilities that may be available
 	  for your processor/board combination. Those facilities are hacks
@@ -222,7 +219,9 @@ config PPC_EARLY_DEBUG_BEAT
 
 config PPC_EARLY_DEBUG_44x
 	bool "Early serial debugging for IBM/AMCC 44x CPUs"
-	depends on 44x
+	# PPC_EARLY_DEBUG on 440 leaves AS=1 mappings above the TLB high water
+	# mark, which doesn't work with current 440 KVM.
+	depends on 44x && !KVM
 	help
 	  Select this to enable early debugging for IBM 44x chips via the
 	  inbuilt serial port.  If you enable this, ensure you set
@@ -258,8 +257,35 @@ config PPC_EARLY_DEBUG_WSP
 	depends on PPC_WSP
 	select PPC_UDBG_16550
 
+config PPC_EARLY_DEBUG_PS3GELIC
+	bool "Early debugging through the PS3 Ethernet port"
+	depends on PPC_PS3
+	select PS3GELIC_UDBG
+	help
+	  Select this to enable early debugging for the PlayStation3 via
+	  UDP broadcasts sent out through the Ethernet port.
+
+config PPC_EARLY_DEBUG_OPAL_RAW
+	bool "OPAL raw console"
+	depends on HVC_OPAL
+	help
+	  Select this to enable early debugging for the PowerNV platform
+	  using a "raw" console
+
+config PPC_EARLY_DEBUG_OPAL_HVSI
+	bool "OPAL hvsi console"
+	depends on HVC_OPAL
+	help
+	  Select this to enable early debugging for the PowerNV platform
+	  using an "hvsi" console
+
 endchoice
 
+config PPC_EARLY_DEBUG_OPAL
+	def_bool y
+	depends on PPC_EARLY_DEBUG_OPAL_RAW || PPC_EARLY_DEBUG_OPAL_HVSI
+
+
 config PPC_EARLY_DEBUG_HVSI_VTERMNO
 	hex "vterm number to use with early debug HVSI"
 	depends on PPC_EARLY_DEBUG_LPAR_HVSI
@@ -268,6 +294,18 @@ config PPC_EARLY_DEBUG_HVSI_VTERMNO
 	  You probably want 0x30000000 for your first serial port and
 	  0x30000001 for your second one
 
+config PPC_EARLY_DEBUG_OPAL_VTERMNO
+	hex "vterm number to use with OPAL early debug"
+	depends on PPC_EARLY_DEBUG_OPAL
+	default "0"
+	help
+	  This correspond to which /dev/hvcN you want to use for early
+	  debug.
+
+	  On OPAL v1 (takeover) this should always be 0
+	  On OPAL v2, this will be 0 for network console and 1 or 2 for
+	  the machine built-in serial ports.
+
 config PPC_EARLY_DEBUG_44x_PHYSLOW
 	hex "Low 32 bits of early debug UART physical address"
 	depends on PPC_EARLY_DEBUG_44x

arch/powerpc/boot/Makefile

@@ -58,7 +58,7 @@ $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
 libfdt       := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
 libfdtheader := fdt.h libfdt.h libfdt_internal.h
 
-$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \
+$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o): \
 	$(addprefix $(obj)/,$(libfdtheader))
 
 src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
@@ -171,6 +171,7 @@ quiet_cmd_wrap	= WRAP    $@
 		$(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux
 
 image-$(CONFIG_PPC_PSERIES)		+= zImage.pseries
+image-$(CONFIG_PPC_POWERNV)		+= zImage.pseries
 image-$(CONFIG_PPC_MAPLE)		+= zImage.maple
 image-$(CONFIG_PPC_IBM_CELL_BLADE)	+= zImage.pseries
 image-$(CONFIG_PPC_PS3)			+= dtbImage.ps3

arch/powerpc/boot/dts/digsy_mtc.dts

@@ -23,19 +23,26 @@
 
 	soc5200@f0000000 {
 		timer@600 {	// General Purpose Timer
+			#gpio-cells = <2>;
 			fsl,has-wdt;
+			gpio-controller;
 		};
 
-		rtc@800 {
-			status = "disabled";
+		timer@610 {
+			#gpio-cells = <2>;
+			gpio-controller;
 		};
 
-		can@900 {
+		rtc@800 {
 			status = "disabled";
 		};
 
-		can@980 {
-			status = "disabled";
+		spi@f00 {
+			msp430@0 {
+				compatible = "spidev";
+				spi-max-frequency = <32000>;
+				reg = <0>;
+			};
 		};
 
 		psc@2000 {		// PSC1
@@ -73,11 +80,16 @@
 		};
 
 		i2c@3d00 {
-			rtc@50 {
+			eeprom@50 {
 				compatible = "at,24c08";
 				reg = <0x50>;
 			};
 
+			rtc@56 {
+				compatible = "mc,rv3029c2";
+				reg = <0x56>;
+			};
+
 			rtc@68 {
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
@@ -90,11 +102,22 @@
 	};
 
 	pci@f0000d00 {
-		status = "disabled";
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+				 0xc000 0 0 2 &mpc5200_pic 0 0 3
+				 0xc000 0 0 3 &mpc5200_pic 0 0 3
+				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 	};
 
 	localbus {
-		ranges = <0 0 0xff000000 0x1000000>;
+		ranges = <0 0 0xff000000 0x1000000
+			  4 0 0x60000000 0x0001000>;
 
 		// 16-bit flash device at LocalPlus Bus CS0
 		flash@0,0 {
@@ -122,5 +145,25 @@
 				reg = <0x00f00000 0x100000>;
 			};
 		};
+
+		can@4,0 {
+			compatible = "nxp,sja1000";
+			reg = <4 0x000 0x80>;
+			nxp,external-clock-frequency = <24000000>;
+			interrupts = <1 2 3>; // Level-low
+		};
+
+		can@4,100 {
+			compatible = "nxp,sja1000";
+			reg = <4 0x100 0x80>;
+			nxp,external-clock-frequency = <24000000>;
+			interrupts = <1 2 3>;  // Level-low
+		};
+
+		serial@4,200 {
+			compatible = "nxp,sc28l92";
+			reg = <4 0x200 0x10>;
+			interrupts = <1 3 3>;
+		};
 	};
 };

arch/powerpc/boot/dts/gef_ppc9a.dts

@@ -269,14 +269,16 @@
 		enet0: ethernet@24000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
+			cell-index = <0>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
 			ranges = <0x0 0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+			interrupts = <29 2 30  2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "gmii";
 
@@ -290,25 +292,48 @@
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x9 0x4>;
 					reg = <1>;
+					device_type = "ethernet-phy";
 				};
 				phy2: ethernet-phy@2 {
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x8 0x4>;
 					reg = <3>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
 				};
 			};
 		};
 
 		enet1: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "gmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
 		};
 
 		serial0: serial@4500 {

arch/powerpc/boot/dts/gef_sbc310.dts

@@ -267,14 +267,16 @@
 		enet0: ethernet@24000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
+			cell-index = <0>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
 			ranges = <0x0 0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+			interrupts = <29 2 30  2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "gmii";
 
@@ -288,25 +290,48 @@
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x9 0x4>;
 					reg = <1>;
+					device_type = "ethernet-phy";
 				};
 				phy2: ethernet-phy@2 {
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x8 0x4>;
 					reg = <3>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
 				};
 			};
 		};
 
 		enet1: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "gmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
 		};
 
 		serial0: serial@4500 {

arch/powerpc/boot/dts/gef_sbc610.dts

@@ -267,14 +267,16 @@
 		enet0: ethernet@24000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
+			cell-index = <0>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
 			ranges = <0x0 0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+			interrupts = <29 2 30  2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "gmii";
 
@@ -288,25 +290,48 @@
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x9 0x4>;
 					reg = <1>;
+					device_type = "ethernet-phy";
 				};
 				phy2: ethernet-phy@2 {
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x8 0x4>;
 					reg = <3>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
 				};
 			};
 		};
 
 		enet1: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "gmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
 		};
 
 		serial0: serial@4500 {

arch/powerpc/boot/dts/hcu4.dts

@@ -1,168 +0,0 @@
-/*
-* Device Tree Source for Netstal Maschinen HCU4
-* based on the IBM Walnut
-*
-* Copyright 2008
-* Niklaus Giger <niklaus.giger@member.fsf.org>
-*
-* Copyright 2007 IBM Corp.
-* Josh Boyer <jwboyer@linux.vnet.ibm.com>
-*
-* This file is licensed under the terms of the GNU General Public
-* License version 2.  This program is licensed "as is" without
-* any warranty of any kind, whether express or implied.
-*/
-
-/dts-v1/;
-
-/ {
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-	model = "netstal,hcu4";
-	compatible = "netstal,hcu4";
-	dcr-parent = <0x1>;
-
-	aliases {
-		ethernet0 = "/plb/opb/ethernet@ef600800";
-		serial0 = "/plb/opb/serial@ef600300";
-	};
-
-	cpus {
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405GPr";
-			reg = <0x0>;
-			clock-frequency = <0>;		/* Filled in by U-Boot */
-			timebase-frequency = <0x0>;	/* Filled in by U-Boot */
-			i-cache-line-size = <0x20>;
-			d-cache-line-size = <0x20>;
-			i-cache-size = <0x4000>;
-			d-cache-size = <0x4000>;
-			dcr-controller;
-			dcr-access-method = "native";
-			linux,phandle = <0x1>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;	/* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <0x0>;
-		dcr-reg = <0xc0 0x9>;
-		#address-cells = <0x0>;
-		#size-cells = <0x0>;
-		#interrupt-cells = <0x2>;
-		linux,phandle = <0x2>;
-	};
-
-	plb {
-		compatible = "ibm,plb3";
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		ranges;
-		clock-frequency = <0x0>;	/* Filled in by U-Boot */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405gp";
-			dcr-reg = <0x10 0x2>;
-		};
-
-		MAL: mcmal {
-			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
-			dcr-reg = <0x180 0x62>;
-			num-tx-chans = <0x1>;
-			num-rx-chans = <0x1>;
-			interrupt-parent = <0x2>;
-			interrupts = <0xb 0x4 0xc 0x4 0xa 0x4 0xd 0x4 0xe 0x4>;
-			linux,phandle = <0x3>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405gp", "ibm,opb";
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			ranges = <0xef600000 0xef600000 0xa00000>;
-			dcr-reg = <0xa0 0x5>;
-			clock-frequency = <0x0>;	/* Filled in by U-Boot */
-
-			UART0: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x8>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0x0>;/* Filled in by U-Boot */
-				current-speed = <0>;	/* Filled in by U-Boot */
-				interrupt-parent = <0x2>;
-				interrupts = <0x0 0x4>;
-			};
-
-			IIC: i2c@ef600500 {
-				compatible = "ibm,iic-405gp", "ibm,iic";
-				reg = <0xef600500 0x11>;
-				interrupt-parent = <0x2>;
-				interrupts = <0x2 0x4>;
-			};
-
-			GPIO: gpio@ef600700 {
-				compatible = "ibm,gpio-405gp";
-				reg = <0xef600700 0x20>;
-			};
-
-			EMAC: ethernet@ef600800 {
-				device_type = "network";
-				compatible = "ibm,emac-405gp", "ibm,emac";
-				interrupt-parent = <0x2>;
-				interrupts = <0xf 0x4 0x9 0x4>;
-				local-mac-address = [00 00 00 00 00 00];
-				reg = <0xef600800 0x70>;
-				mal-device = <0x3>;
-				mal-tx-channel = <0x0>;
-				mal-rx-channel = <0x0>;
-				cell-index = <0x0>;
-				max-frame-size = <0x5dc>;
-				rx-fifo-size = <0x1000>;
-				tx-fifo-size = <0x800>;
-				phy-mode = "rmii";
-				phy-map = <0x1>;
-			};
-		};
-
-		EBC0: ebc {
-			compatible = "ibm,ebc-405gp", "ibm,ebc";
-			dcr-reg = <0x12 0x2>;
-			#address-cells = <0x2>;
-			#size-cells = <0x1>;
-			clock-frequency = <0x0>;	/* Filled in by U-Boot */
-
-			sram@0,0 {
-				reg = <0x0 0x0 0x80000>;
-			};
-
-			flash@0,80000 {
-				compatible = "jedec-flash";
-				bank-width = <0x1>;
-				reg = <0x0 0x80000 0x80000>;
-				#address-cells = <0x1>;
-				#size-cells = <0x1>;
-
-				partition@0 {
-					label = "OpenBIOS";
-					reg = <0x0 0x80000>;
-					read-only;
-				};
-			};
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@ef600300";
-	};
-};

arch/powerpc/boot/dts/ksi8560.dts

@@ -306,7 +306,7 @@
 	localbus@fdf05000 {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		compatible = "fsl,mpc8560-localbus";
+		compatible = "fsl,mpc8560-localbus", "simple-bus";
 		reg = <0xfdf05000 0x68>;
 
 		ranges = <0x0 0x0 0xe0000000 0x00800000

arch/powerpc/boot/dts/mgcoge.dts

@@ -213,6 +213,15 @@
 				linux,network-index = <2>;
 				fsl,cpm-command = <0x16200300>;
 			};
+
+			usb@11b60 {
+				compatible = "fsl,mpc8272-cpm-usb";
+				mode = "peripheral";
+				reg = <0x11b60 0x40 0x8b00 0x100>;
+				interrupts = <11 8>;
+				interrupt-parent = <&PIC>;
+				usb-clock = <5>;
+			};
 		};
 
 		cpm2_pio_c: gpio-controller@10d40 {

arch/powerpc/boot/dts/mpc5200b.dtsi

@@ -147,6 +147,8 @@
 		};
 
 		spi@f00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
 			reg = <0xf00 0x20>;
 			interrupts = <2 13 0 2 14 0>;

arch/powerpc/boot/dts/mpc8349emitx.dts

@@ -390,7 +390,8 @@
 		#address-cells = <2>;
 		#size-cells = <1>;
 		compatible = "fsl,mpc8349e-localbus",
-			     "fsl,pq2pro-localbus";
+			     "fsl,pq2pro-localbus",
+			     "simple-bus";
 		reg = <0xe0005000 0xd8>;
 		ranges = <0x0 0x0 0xfe000000 0x1000000	/* flash */
 			  0x1 0x0 0xf8000000 0x20000	/* VSC 7385 */

arch/powerpc/boot/dts/p1022ds.dts

@@ -150,7 +150,7 @@
 		};
 
 		board-control@3,0 {
-			compatible = "fsl,p1022ds-pixis";
+			compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
 			reg = <3 0 0x30>;
 			interrupt-parent = <&mpic>;
 			/*

arch/powerpc/boot/dts/p2020ds.dts

@@ -118,6 +118,11 @@
 			};
 		};
 
+		board-control@3,0 {
+			compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
+			reg = <0x3 0x0 0x30>;
+		};
+
 		nand@4,0 {
 			compatible = "fsl,elbc-fcm-nand";
 			reg = <0x4 0x0 0x40000>;

arch/powerpc/boot/dts/p2040rdb.dts → arch/powerpc/boot/dts/p2041rdb.dts

@@ -1,5 +1,5 @@
 /*
- * P2040RDB Device Tree Source
+ * P2041RDB Device Tree Source
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
@@ -32,11 +32,11 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "p2040si.dtsi"
+/include/ "p2041si.dtsi"
 
 / {
-	model = "fsl,P2040RDB";
-	compatible = "fsl,P2040RDB";
+	model = "fsl,P2041RDB";
+	compatible = "fsl,P2041RDB";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
@@ -45,6 +45,10 @@
 		device_type = "memory";
 	};
 
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
 	soc: soc@ffe000000 {
 		spi@110000 {
 			flash@0 {
@@ -97,13 +101,8 @@
 			};
 		};
 
-		usb0: usb@210000 {
-			phy_type = "utmi";
-		};
-
 		usb1: usb@211000 {
 			dr_mode = "host";
-			phy_type = "utmi";
 		};
 	};
 

arch/powerpc/boot/dts/p2040si.dtsi → arch/powerpc/boot/dts/p2041si.dtsi

@@ -1,5 +1,5 @@
 /*
- * P2040 Silicon Device Tree Source
+ * P2041 Silicon Device Tree Source
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
@@ -35,13 +35,14 @@
 /dts-v1/;
 
 / {
-	compatible = "fsl,P2040";
+	compatible = "fsl,P2041";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
 	aliases {
 		ccsr = &soc;
+		dcsr = &dcsr;
 
 		serial0 = &serial0;
 		serial1 = &serial1;
@@ -109,6 +110,74 @@
 		};
 	};
 
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+
+		dcsr-epu@0 {
+			compatible = "fsl,dcsr-epu";
+			interrupts = <52 2 0 0
+				      84 2 0 0
+				      85 2 0 0>;
+			interrupt-parent = <&mpic>;
+			reg = <0x0 0x1000>;
+		};
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+		dcsr-ocn@11000 {
+			compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr>;
+			reg = <0x12000 0x1000>;
+		};
+		dcsr-nal@18000 {
+			compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@42000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu2>;
+			reg = <0x42000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@43000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu3>;
+			reg = <0x43000 0x1000>;
+		};
+	};
+
 	soc: soc@ffe000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -128,14 +197,14 @@
 			fsl,num-laws = <32>;
 		};
 
-		memory-controller@8000 {
+		ddr: memory-controller@8000 {
 			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
 			reg = <0x8000 0x1000>;
 			interrupts = <16 2 1 23>;
 		};
 
 		cpc: l3-cache-controller@10000 {
-			compatible = "fsl,p2040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+			compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
 			reg = <0x10000 0x1000>;
 			interrupts = <16 2 1 27>;
 		};
@@ -226,7 +295,7 @@
 		};
 
 		clockgen: global-utilities@e1000 {
-			compatible = "fsl,p2040-clockgen", "fsl,qoriq-clockgen-1.0";
+			compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
 			reg = <0xe1000 0x1000>;
 			clock-frequency = <0>;
 		};
@@ -238,45 +307,45 @@
 		};
 
 		sfp: sfp@e8000 {
-			compatible = "fsl,p2040-sfp", "fsl,qoriq-sfp-1.0";
+			compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
 			reg	   = <0xe8000 0x1000>;
 		};
 
 		serdes: serdes@ea000 {
-			compatible = "fsl,p2040-serdes";
+			compatible = "fsl,p2041-serdes";
 			reg	   = <0xea000 0x1000>;
 		};
 
 		dma0: dma@100300 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "fsl,p2040-dma", "fsl,eloplus-dma";
+			compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
 			reg = <0x100300 0x4>;
 			ranges = <0x0 0x100100 0x200>;
 			cell-index = <0>;
 			dma-channel@0 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
 				interrupts = <28 2 0 0>;
 			};
 			dma-channel@80 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
 				interrupts = <29 2 0 0>;
 			};
 			dma-channel@100 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x100 0x80>;
 				cell-index = <2>;
 				interrupts = <30 2 0 0>;
 			};
 			dma-channel@180 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x180 0x80>;
 				cell-index = <3>;
@@ -287,33 +356,33 @@
 		dma1: dma@101300 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "fsl,p2040-dma", "fsl,eloplus-dma";
+			compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
 			reg = <0x101300 0x4>;
 			ranges = <0x0 0x101100 0x200>;
 			cell-index = <1>;
 			dma-channel@0 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
 				interrupts = <32 2 0 0>;
 			};
 			dma-channel@80 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
 				interrupts = <33 2 0 0>;
 			};
 			dma-channel@100 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x100 0x80>;
 				cell-index = <2>;
 				interrupts = <34 2 0 0>;
 			};
 			dma-channel@180 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x180 0x80>;
 				cell-index = <3>;
@@ -324,22 +393,20 @@
 		spi@110000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "fsl,p2040-espi", "fsl,mpc8536-espi";
+			compatible = "fsl,p2041-espi", "fsl,mpc8536-espi";
 			reg = <0x110000 0x1000>;
 			interrupts = <53 0x2 0 0>;
 			fsl,espi-num-chipselects = <4>;
-
 		};
 
 		sdhc: sdhc@114000 {
-			compatible = "fsl,p2040-esdhc", "fsl,esdhc";
+			compatible = "fsl,p2041-esdhc", "fsl,esdhc";
 			reg = <0x114000 0x1000>;
 			interrupts = <48 2 0 0>;
 			sdhci,auto-cmd12;
 			clock-frequency = <0>;
 		};
 
-
 		i2c@118000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -417,7 +484,7 @@
 		};
 
 		gpio0: gpio@130000 {
-			compatible = "fsl,p2040-gpio", "fsl,qoriq-gpio";
+			compatible = "fsl,p2041-gpio", "fsl,qoriq-gpio";
 			reg = <0x130000 0x1000>;
 			interrupts = <55 2 0 0>;
 			#gpio-cells = <2>;
@@ -425,32 +492,34 @@
 		};
 
 		usb0: usb@210000 {
-			compatible = "fsl,p2040-usb2-mph",
+			compatible = "fsl,p2041-usb2-mph",
 					"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
 			reg = <0x210000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <44 0x2 0 0>;
+			phy_type = "utmi";
 			port0;
 		};
 
 		usb1: usb@211000 {
-			compatible = "fsl,p2040-usb2-dr",
+			compatible = "fsl,p2041-usb2-dr",
 					"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
 			reg = <0x211000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <45 0x2 0 0>;
+			phy_type = "utmi";
 		};
 
 		sata@220000 {
-			compatible = "fsl,p2040-sata", "fsl,pq-sata-v2";
+			compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
 			reg = <0x220000 0x1000>;
 			interrupts = <68 0x2 0 0>;
 		};
 
 		sata@221000 {
-			compatible = "fsl,p2040-sata", "fsl,pq-sata-v2";
+			compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
 			reg = <0x221000 0x1000>;
 			interrupts = <69 0x2 0 0>;
 		};
@@ -534,19 +603,19 @@
 	};
 
 	localbus@ffe124000 {
-		compatible = "fsl,p2040-elbc", "fsl,elbc", "simple-bus";
+		compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
 		interrupts = <25 2 0 0>;
 		#address-cells = <2>;
 		#size-cells = <1>;
 	};
 
 	pci0: pcie@ffe200000 {
-		compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
+		compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
 		device_type = "pci";
 		#size-cells = <2>;
 		#address-cells = <3>;
 		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
+		clock-frequency = <33333333>;
 		fsl,msi = <&msi0>;
 		interrupts = <16 2 1 15>;
 		pcie@0 {
@@ -568,12 +637,12 @@
 	};
 
 	pci1: pcie@ffe201000 {
-		compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
+		compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
 		device_type = "pci";
 		#size-cells = <2>;
 		#address-cells = <3>;
 		bus-range = <0 0xff>;
-		clock-frequency = <0x1fca055>;
+		clock-frequency = <33333333>;
 		fsl,msi = <&msi1>;
 		interrupts = <16 2 1 14>;
 		pcie@0 {
@@ -595,12 +664,12 @@
 	};
 
 	pci2: pcie@ffe202000 {
-		compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
+		compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
 		device_type = "pci";
 		#size-cells = <2>;
 		#address-cells = <3>;
 		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
+		clock-frequency = <33333333>;
 		fsl,msi = <&msi2>;
 		interrupts = <16 2 1 13>;
 		pcie@0 {

arch/powerpc/boot/dts/p3041ds.dts

@@ -45,6 +45,10 @@
 		device_type = "memory";
 	};
 
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
 	soc: soc@ffe000000 {
 		spi@110000 {
 			flash@0 {
@@ -147,8 +151,8 @@
 		};
 
 		board-control@3,0 {
-			compatible = "fsl,p3041ds-pixis";
-			reg = <3 0 0x20>;
+			compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x30>;
 		};
 	};
 

arch/powerpc/boot/dts/p3041si.dtsi

@@ -42,6 +42,7 @@
 
 	aliases {
 		ccsr = &soc;
+		dcsr = &dcsr;
 
 		serial0 = &serial0;
 		serial1 = &serial1;
@@ -114,6 +115,74 @@
 		};
 	};
 
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+
+		dcsr-epu@0 {
+			compatible = "fsl,dcsr-epu";
+			interrupts = <52 2 0 0
+				      84 2 0 0
+				      85 2 0 0>;
+			interrupt-parent = <&mpic>;
+			reg = <0x0 0x1000>;
+		};
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p43041-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+		dcsr-ocn@11000 {
+			compatible = "fsl,p43041-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr>;
+			reg = <0x12000 0x1000>;
+		};
+		dcsr-nal@18000 {
+			compatible = "fsl,p43041-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p43041-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@42000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu2>;
+			reg = <0x42000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@43000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu3>;
+			reg = <0x43000 0x1000>;
+		};
+	};
+
 	soc: soc@ffe000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -133,7 +202,7 @@
 			fsl,num-laws = <32>;
 		};
 
-		memory-controller@8000 {
+		ddr: memory-controller@8000 {
 			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
 			reg = <0x8000 0x1000>;
 			interrupts = <16 2 1 23>;

arch/powerpc/boot/dts/p3060qds.dts

@@ -0,0 +1,238 @@
+/*
+ * P3060QDS Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p3060si.dtsi"
+
+/ {
+	model = "fsl,P3060QDS";
+	compatible = "fsl,P3060QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	soc: soc@ffe000000 {
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+			flash@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,en25q32b";
+				reg = <1>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@spi1 {
+					label = "spi1";
+					reg = <0x00000000 0x00400000>;
+				};
+			};
+			flash@2 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at45db081d";
+				reg = <2>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@spi1 {
+					label = "spi2";
+					reg = <0x00000000 0x00100000>;
+				};
+			};
+			flash@3 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,sst25wf040";
+				reg = <3>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@spi3 {
+					label = "spi3";
+					reg = <0x00000000 0x00080000>;
+				};
+			};
+		};
+
+		i2c@118000 {
+			eeprom@51 {
+				compatible = "at24,24c256";
+				reg = <0x51>;
+			};
+			eeprom@53 {
+				compatible = "at24,24c256";
+				reg = <0x53>;
+			};
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+		};
+
+		usb0: usb@210000 {
+			phy_type = "ulpi";
+		};
+
+		usb1: usb@211000 {
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+	};
+
+	rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+	localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xffa00000 0x00040000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x08000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x2 0x0 0x40000>;
+
+			partition@0 {
+				label = "NAND U-Boot Image";
+				reg = <0x0 0x02000000>;
+				read-only;
+			};
+
+			partition@2000000 {
+				label = "NAND Root File System";
+				reg = <0x02000000 0x10000000>;
+			};
+
+			partition@12000000 {
+				label = "NAND Compressed RFS Image";
+				reg = <0x12000000 0x08000000>;
+			};
+
+			partition@1a000000 {
+				label = "NAND Linux Kernel Image";
+				reg = <0x1a000000 0x04000000>;
+			};
+
+			partition@1e000000 {
+				label = "NAND DTB Image";
+				reg = <0x1e000000 0x01000000>;
+			};
+
+			partition@1f000000 {
+				label = "NAND Writable User area";
+				reg = <0x1f000000 0x21000000>;
+			};
+		};
+
+		board-control@3,0 {
+			compatible = "fsl,p3060qds-fpga", "fsl,fpga-qixis";
+			reg = <3 0 0x100>;
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};

arch/powerpc/boot/dts/p3060si.dtsi

@@ -0,0 +1,719 @@
+/*
+ * P3060 Silicon Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,P3060";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e500mc@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e500mc@1 {
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu4: PowerPC,e500mc@4 {
+			device_type = "cpu";
+			reg = <4>;
+			next-level-cache = <&L2_4>;
+			L2_4: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu5: PowerPC,e500mc@5 {
+			device_type = "cpu";
+			reg = <5>;
+			next-level-cache = <&L2_5>;
+			L2_5: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu6: PowerPC,e500mc@6 {
+			device_type = "cpu";
+			reg = <6>;
+			next-level-cache = <&L2_6>;
+			L2_6: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu7: PowerPC,e500mc@7 {
+			device_type = "cpu";
+			reg = <7>;
+			next-level-cache = <&L2_7>;
+			L2_7: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+
+		dcsr-epu@0 {
+			compatible = "fsl,dcsr-epu";
+			interrupts = <52 2 0 0
+				      84 2 0 0
+				      85 2 0 0>;
+			interrupt-parent = <&mpic>;
+			reg = <0x0 0x1000>;
+		};
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+		dcsr-ocn@11000 {
+			compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr>;
+			reg = <0x12000 0x1000>;
+		};
+		dcsr-nal@18000 {
+			compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@44000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu4>;
+			reg = <0x44000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@45000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu5>;
+			reg = <0x45000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@46000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu6>;
+			reg = <0x46000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@47000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu7>;
+			reg = <0x47000 0x1000>;
+		};
+	};
+
+	soc: soc@ffe000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		soc-sram-error {
+			compatible = "fsl,soc-sram-error";
+			interrupts = <16 2 1 29>;
+		};
+
+		corenet-law@0 {
+			compatible = "fsl,corenet-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <32>;
+		};
+
+		ddr: memory-controller@8000 {
+			compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+			reg = <0x8000 0x1000>;
+			interrupts = <16 2 1 23>;
+		};
+
+		cpc: l3-cache-controller@10000 {
+			compatible = "fsl,p3060-l3-cache-controller", "cache";
+			reg = <0x10000 0x1000
+			       0x11000 0x1000>;
+			interrupts = <16 2 1 27>;
+		};
+
+		corenet-cf@18000 {
+			compatible = "fsl,corenet-cf";
+			reg = <0x18000 0x1000>;
+			interrupts = <16 2 1 31>;
+			fsl,ccf-num-csdids = <32>;
+			fsl,ccf-num-snoopids = <32>;
+		};
+
+		iommu@20000 {
+			compatible = "fsl,pamu-v1.0", "fsl,pamu";
+			reg = <0x20000 0x5000>;
+			interrupts = <
+				24 2 0 0
+				16 2 1 30>;
+		};
+
+		mpic: pic@40000 {
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <4>;
+			reg = <0x40000 0x40000>;
+			compatible = "fsl,mpic", "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi0: msi@41600 {
+			compatible = "fsl,mpic-msi";
+			reg = <0x41600 0x200>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0 0 0
+				0xe1 0 0 0
+				0xe2 0 0 0
+				0xe3 0 0 0
+				0xe4 0 0 0
+				0xe5 0 0 0
+				0xe6 0 0 0
+				0xe7 0 0 0>;
+		};
+
+		msi1: msi@41800 {
+			compatible = "fsl,mpic-msi";
+			reg = <0x41800 0x200>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe8 0 0 0
+				0xe9 0 0 0
+				0xea 0 0 0
+				0xeb 0 0 0
+				0xec 0 0 0
+				0xed 0 0 0
+				0xee 0 0 0
+				0xef 0 0 0>;
+		};
+
+		msi2: msi@41a00 {
+			compatible = "fsl,mpic-msi";
+			reg = <0x41a00 0x200>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xf0 0 0 0
+				0xf1 0 0 0
+				0xf2 0 0 0
+				0xf3 0 0 0
+				0xf4 0 0 0
+				0xf5 0 0 0
+				0xf6 0 0 0
+				0xf7 0 0 0>;
+		};
+
+		rmu: rmu@d3000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,srio-rmu";
+			reg = <0xd3000 0x500>;
+			ranges = <0x0 0xd3000 0x500>;
+
+			message-unit@0 {
+				compatible = "fsl,srio-msg-unit";
+				reg = <0x0 0x100>;
+				interrupts = <
+					60 2 0 0  /* msg1_tx_irq */
+					61 2 0 0>;/* msg1_rx_irq */
+			};
+			message-unit@100 {
+				compatible = "fsl,srio-msg-unit";
+				reg = <0x100 0x100>;
+				interrupts = <
+					62 2 0 0  /* msg2_tx_irq */
+					63 2 0 0>;/* msg2_rx_irq */
+			};
+			doorbell-unit@400 {
+				compatible = "fsl,srio-dbell-unit";
+				reg = <0x400 0x80>;
+				interrupts = <
+					56 2 0 0  /* bell_outb_irq */
+					57 2 0 0>;/* bell_inb_irq */
+			};
+			port-write-unit@4e0 {
+				compatible = "fsl,srio-port-write-unit";
+				reg = <0x4e0 0x20>;
+				interrupts = <16 2 1 11>;
+			};
+		};
+
+		guts: global-utilities@e0000 {
+			compatible = "fsl,qoriq-device-config-1.0";
+			reg = <0xe0000 0xe00>;
+			fsl,has-rstcr;
+			#sleep-cells = <1>;
+			fsl,liodn-bits = <12>;
+		};
+
+		pins: global-utilities@e0e00 {
+			compatible = "fsl,qoriq-pin-control-1.0";
+			reg = <0xe0e00 0x200>;
+			#sleep-cells = <2>;
+		};
+
+		clockgen: global-utilities@e1000 {
+			compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
+			reg = <0xe1000 0x1000>;
+			clock-frequency = <0>;
+		};
+
+		rcpm: global-utilities@e2000 {
+			compatible = "fsl,qoriq-rcpm-1.0";
+			reg = <0xe2000 0x1000>;
+			#sleep-cells = <1>;
+		};
+
+		sfp: sfp@e8000 {
+			compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
+			reg	   = <0xe8000 0x1000>;
+		};
+
+		serdes: serdes@ea000 {
+			compatible = "fsl,p3060-serdes";
+			reg	   = <0xea000 0x1000>;
+		};
+
+		dma0: dma@100300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
+			reg = <0x100300 0x4>;
+			ranges = <0x0 0x100100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,p3060-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupts = <28 2 0 0>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,p3060-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupts = <29 2 0 0>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,p3060-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupts = <30 2 0 0>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,p3060-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupts = <31 2 0 0>;
+			};
+		};
+
+		dma1: dma@101300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
+			reg = <0x101300 0x4>;
+			ranges = <0x0 0x101100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,p3060-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupts = <32 2 0 0>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,p3060-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupts = <33 2 0 0>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,p3060-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupts = <34 2 0 0>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,p3060-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupts = <35 2 0 0>;
+			};
+		};
+
+		spi@110000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,p3060-espi", "fsl,mpc8536-espi";
+			reg = <0x110000 0x1000>;
+			interrupts = <53 0x2 0 0>;
+			fsl,espi-num-chipselects = <4>;
+		};
+
+		i2c@118000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x118000 0x100>;
+			interrupts = <38 2 0 0>;
+			dfsrr;
+		};
+
+		i2c@118100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x118100 0x100>;
+			interrupts = <38 2 0 0>;
+			dfsrr;
+		};
+
+		i2c@119000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <2>;
+			compatible = "fsl-i2c";
+			reg = <0x119000 0x100>;
+			interrupts = <39 2 0 0>;
+			dfsrr;
+		};
+
+		i2c@119100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <3>;
+			compatible = "fsl-i2c";
+			reg = <0x119100 0x100>;
+			interrupts = <39 2 0 0>;
+			dfsrr;
+		};
+
+		serial0: serial@11c500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x11c500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <36 2 0 0>;
+		};
+
+		serial1: serial@11c600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x11c600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <36 2 0 0>;
+		};
+
+		serial2: serial@11d500 {
+			cell-index = <2>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x11d500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <37 2 0 0>;
+		};
+
+		serial3: serial@11d600 {
+			cell-index = <3>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x11d600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <37 2 0 0>;
+		};
+
+		gpio0: gpio@130000 {
+			compatible = "fsl,p3060-gpio", "fsl,qoriq-gpio";
+			reg = <0x130000 0x1000>;
+			interrupts = <55 2 0 0>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		usb0: usb@210000 {
+			compatible = "fsl,p3060-usb2-mph",
+					"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+			reg = <0x210000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <44 0x2 0 0>;
+		};
+
+		usb1: usb@211000 {
+			compatible = "fsl,p3060-usb2-dr",
+					"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+			reg = <0x211000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <45 0x2 0 0>;
+		};
+
+		crypto: crypto@300000 {
+			compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x300000 0x10000>;
+			ranges = <0 0x300000 0x10000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <92 2 0 0>;
+
+			sec_jr0: jr@1000 {
+				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
+				reg = <0x1000 0x1000>;
+				interrupt-parent = <&mpic>;
+				interrupts = <88 2 0 0>;
+			};
+
+			sec_jr1: jr@2000 {
+				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
+				reg = <0x2000 0x1000>;
+				interrupt-parent = <&mpic>;
+				interrupts = <89 2 0 0>;
+			};
+
+			sec_jr2: jr@3000 {
+				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
+				reg = <0x3000 0x1000>;
+				interrupt-parent = <&mpic>;
+				interrupts = <90 2 0 0>;
+			};
+
+			sec_jr3: jr@4000 {
+				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
+				reg = <0x4000 0x1000>;
+				interrupt-parent = <&mpic>;
+				interrupts = <91 2 0 0>;
+			};
+
+			rtic@6000 {
+				compatible = "fsl,sec-v4.1-rtic", "fsl,sec-v4.0-rtic";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x6000 0x100>;
+				ranges = <0x0 0x6100 0xe00>;
+
+				rtic_a: rtic-a@0 {
+					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
+					reg = <0x00 0x20 0x100 0x80>;
+				};
+
+				rtic_b: rtic-b@20 {
+					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
+					reg = <0x20 0x20 0x200 0x80>;
+				};
+
+				rtic_c: rtic-c@40 {
+					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
+					reg = <0x40 0x20 0x300 0x80>;
+				};
+
+				rtic_d: rtic-d@60 {
+					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
+					reg = <0x60 0x20 0x500 0x80>;
+				};
+			};
+		};
+
+		sec_mon: sec_mon@314000 {
+			compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
+			reg = <0x314000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <93 2 0 0>;
+		};
+	};
+
+	rapidio@ffe0c0000 {
+		compatible = "fsl,srio";
+		interrupts = <16 2 1 11>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		fsl,srio-rmu-handle = <&rmu>;
+		ranges;
+
+		port1 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			cell-index = <1>;
+		};
+
+		port2 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			cell-index = <2>;
+		};
+	};
+
+	localbus@ffe124000 {
+		compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
+		interrupts = <25 2 0 0>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+	};
+
+	pci0: pcie@ffe200000 {
+		compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+		device_type = "pci";
+		#size-cells = <2>;
+		#address-cells = <3>;
+		bus-range = <0x0 0xff>;
+		clock-frequency = <33333333>;
+		fsl,msi = <&msi0>;
+		interrupts = <16 2 1 15>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			interrupts = <16 2 1 15>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 40 1 0 0
+				0000 0 0 2 &mpic 1 1 0 0
+				0000 0 0 3 &mpic 2 1 0 0
+				0000 0 0 4 &mpic 3 1 0 0
+				>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+		device_type = "pci";
+		#size-cells = <2>;
+		#address-cells = <3>;
+		bus-range = <0 0xff>;
+		clock-frequency = <33333333>;
+		fsl,msi = <&msi1>;
+		interrupts = <16 2 1 14>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			interrupts = <16 2 1 14>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 41 1 0 0
+				0000 0 0 2 &mpic 5 1 0 0
+				0000 0 0 3 &mpic 6 1 0 0
+				0000 0 0 4 &mpic 7 1 0 0
+				>;
+		};
+	};
+};

arch/powerpc/boot/dts/p4080ds.dts

@@ -45,6 +45,10 @@
 		device_type = "memory";
 	};
 
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
 	soc: soc@ffe000000 {
 		spi@110000 {
 			flash@0 {
@@ -108,7 +112,8 @@
 
 	localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x1000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  3 0 0xf 0xffdf0000 0x00008000>;
 
 		flash@0,0 {
 			compatible = "cfi-flash";
@@ -116,6 +121,11 @@
 			bank-width = <2>;
 			device-width = <2>;
 		};
+
+		board-control@3,0 {
+			compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x30>;
+		};
 	};
 
 	pci0: pcie@ffe200000 {

arch/powerpc/boot/dts/p4080si.dtsi

@@ -42,6 +42,7 @@
 
 	aliases {
 		ccsr = &soc;
+		dcsr = &dcsr;
 
 		serial0 = &serial0;
 		serial1 = &serial1;
@@ -77,7 +78,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu0: PowerPC,4080@0 {
+		cpu0: PowerPC,e500mc@0 {
 			device_type = "cpu";
 			reg = <0>;
 			next-level-cache = <&L2_0>;
@@ -85,7 +86,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu1: PowerPC,4080@1 {
+		cpu1: PowerPC,e500mc@1 {
 			device_type = "cpu";
 			reg = <1>;
 			next-level-cache = <&L2_1>;
@@ -93,7 +94,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu2: PowerPC,4080@2 {
+		cpu2: PowerPC,e500mc@2 {
 			device_type = "cpu";
 			reg = <2>;
 			next-level-cache = <&L2_2>;
@@ -101,7 +102,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu3: PowerPC,4080@3 {
+		cpu3: PowerPC,e500mc@3 {
 			device_type = "cpu";
 			reg = <3>;
 			next-level-cache = <&L2_3>;
@@ -109,7 +110,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu4: PowerPC,4080@4 {
+		cpu4: PowerPC,e500mc@4 {
 			device_type = "cpu";
 			reg = <4>;
 			next-level-cache = <&L2_4>;
@@ -117,7 +118,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu5: PowerPC,4080@5 {
+		cpu5: PowerPC,e500mc@5 {
 			device_type = "cpu";
 			reg = <5>;
 			next-level-cache = <&L2_5>;
@@ -125,7 +126,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu6: PowerPC,4080@6 {
+		cpu6: PowerPC,e500mc@6 {
 			device_type = "cpu";
 			reg = <6>;
 			next-level-cache = <&L2_6>;
@@ -133,7 +134,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu7: PowerPC,4080@7 {
+		cpu7: PowerPC,e500mc@7 {
 			device_type = "cpu";
 			reg = <7>;
 			next-level-cache = <&L2_7>;
@@ -143,6 +144,99 @@
 		};
 	};
 
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+
+		dcsr-epu@0 {
+			compatible = "fsl,dcsr-epu";
+			interrupts = <52 2 0 0
+				      84 2 0 0
+				      85 2 0 0>;
+			interrupt-parent = <&mpic>;
+			reg = <0x0 0x1000>;
+		};
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+		dcsr-ocn@11000 {
+			compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr1>;
+			reg = <0x12000 0x1000>;
+		};
+		dcsr-ddr@13000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr2>;
+			reg = <0x13000 0x1000>;
+		};
+		dcsr-nal@18000 {
+			compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@42000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu2>;
+			reg = <0x42000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@43000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu3>;
+			reg = <0x43000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@44000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu4>;
+			reg = <0x44000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@45000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu5>;
+			reg = <0x45000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@46000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu6>;
+			reg = <0x46000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@47000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu7>;
+			reg = <0x47000 0x1000>;
+		};
+	};
+
 	soc: soc@ffe000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -162,13 +256,13 @@
 			fsl,num-laws = <32>;
 		};
 
-		memory-controller@8000 {
+		ddr1: memory-controller@8000 {
 			compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
 			reg = <0x8000 0x1000>;
 			interrupts = <16 2 1 23>;
 		};
 
-		memory-controller@9000 {
+		ddr2: memory-controller@9000 {
 			compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
 			reg = <0x9000 0x1000>;
 			interrupts = <16 2 1 22>;

arch/powerpc/boot/dts/p5020ds.dts

@@ -45,6 +45,10 @@
 		device_type = "memory";
 	};
 
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
 	soc: soc@ffe000000 {
 		spi@110000 {
 			flash@0 {
@@ -147,8 +151,8 @@
 		};
 
 		board-control@3,0 {
-			compatible = "fsl,p5020ds-pixis";
-			reg = <3 0 0x20>;
+			compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x30>;
 		};
 	};
 

arch/powerpc/boot/dts/p5020si.dtsi

@@ -42,6 +42,7 @@
 
 	aliases {
 		ccsr = &soc;
+		dcsr = &dcsr;
 
 		serial0 = &serial0;
 		serial1 = &serial1;
@@ -98,6 +99,69 @@
 		};
 	};
 
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+
+		dcsr-epu@0 {
+			compatible = "fsl,dcsr-epu";
+			interrupts = <52 2 0 0
+				      84 2 0 0
+				      85 2 0 0>;
+			interrupt-parent = <&mpic>;
+			reg = <0x0 0x1000>;
+		};
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+		dcsr-ocn@11000 {
+			compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr1>;
+			reg = <0x12000 0x1000>;
+		};
+		dcsr-ddr@13000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr2>;
+			reg = <0x13000 0x1000>;
+		};
+		dcsr-nal@18000 {
+			compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+	};
+
 	soc: soc@ffe000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -117,13 +181,13 @@
 			fsl,num-laws = <32>;
 		};
 
-		memory-controller@8000 {
+		ddr1: memory-controller@8000 {
 			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
 			reg = <0x8000 0x1000>;
 			interrupts = <16 2 1 23>;
 		};
 
-		memory-controller@9000 {
+		ddr2: memory-controller@9000 {
 			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
 			reg = <0x9000 0x1000>;
 			interrupts = <16 2 1 22>;

arch/powerpc/boot/dts/sbc8560.dts

@@ -331,7 +331,7 @@
 	};
 
 	localbus@ff705000 {
-		compatible = "fsl,mpc8560-localbus";
+		compatible = "fsl,mpc8560-localbus", "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		reg = <0xff705000 0x100>;	// BRx, ORx, etc.

arch/powerpc/boot/dts/yosemite.dts

@@ -138,6 +138,42 @@
 				clock-frequency = <0>; /* Filled in by zImage */
 				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl256n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02540000>;
+					};
+					partition@3f40000 {
+						label = "env";
+						reg = <0x03f40000 0x00040000>;
+					};
+					partition@3f80000 {
+						label = "u-boot";
+						reg = <0x03f80000 0x00080000>;
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {

arch/powerpc/configs/40x/hcu4_defconfig

@@ -1,81 +0,0 @@
-CONFIG_40x=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_HCU4=y
-# CONFIG_WALNUT is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=35000
-CONFIG_NETDEVICES=y
-CONFIG_ETHERNET=y
-CONFIG_NET_VENDOR_IBM=y
-CONFIG_IBM_EMAC=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/powerpc/configs/85xx/p1023rds_defconfig

@@ -24,7 +24,7 @@ CONFIG_P1023_RDS=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_CPM2=y
-CONFIG_MPC8xxx_GPIO=y
+CONFIG_GPIO_MPC8XXX=y
 CONFIG_HIGHMEM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y

arch/powerpc/configs/85xx/xes_mpc85xx_defconfig

@@ -20,7 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_XES_MPC85xx=y
-CONFIG_MPC8xxx_GPIO=y
+CONFIG_GPIO_MPC8XXX=y
 CONFIG_HIGHMEM=y
 CONFIG_MATH_EMULATION=y
 CONFIG_SPARSE_IRQ=y

arch/powerpc/configs/corenet32_smp_defconfig

@@ -12,9 +12,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
@@ -23,8 +21,9 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_P2040_RDB=y
+CONFIG_P2041_RDB=y
 CONFIG_P3041_DS=y
+CONFIG_P3060_QDS=y
 CONFIG_P4080_DS=y
 CONFIG_P5020_DS=y
 CONFIG_HIGHMEM=y
@@ -69,7 +68,6 @@ CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -107,7 +105,6 @@ CONFIG_FSL_PQ_MDIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_PPC_EPAPR_HV_BYTECHAN=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -136,8 +133,6 @@ CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_OF=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
@@ -146,7 +141,6 @@ CONFIG_RTC_DRV_DS3232=y
 CONFIG_RTC_DRV_CMOS=y
 CONFIG_UIO=y
 CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
 CONFIG_VIRT_DRIVERS=y
 CONFIG_FSL_HV_MANAGER=y
 CONFIG_EXT2_FS=y
@@ -173,7 +167,6 @@ CONFIG_MAC_PARTITION=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=m
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y

arch/powerpc/configs/corenet64_smp_defconfig

@@ -11,10 +11,8 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
@@ -25,7 +23,6 @@ CONFIG_P5020_DS=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BINFMT_MISC=m
-# CONFIG_PCI is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -93,10 +90,8 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_VIRQ_DEBUG=y
 CONFIG_CRYPTO_PCBC=m

arch/powerpc/configs/mgcoge_defconfig

@@ -1,15 +1,22 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
 CONFIG_SPARSE_IRQ=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
+# CONFIG_RD_GZIP is not set
 CONFIG_KALLSYMS_ALL=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
 # CONFIG_IOSCHED_CFQ is not set
+# CONFIG_PPC_PMAC is not set
 CONFIG_PPC_82xx=y
 CONFIG_MGCOGE=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BINFMT_MISC=y
 # CONFIG_SECCOMP is not set
 CONFIG_NET=y
@@ -24,11 +31,10 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
+CONFIG_TIPC=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLKDEVS=y
@@ -42,7 +48,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_FIXED_PHY=y
 CONFIG_NET_ETHERNET=y
@@ -50,6 +55,7 @@ CONFIG_FS_ENET=y
 CONFIG_FS_ENET_MDIO_FCC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
@@ -57,24 +63,24 @@ CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_POWERMAC is not set
 CONFIG_I2C_CPM=y
 # CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_FSL_USB2=y
+CONFIG_USB_G_SERIAL=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
 CONFIG_AUTOFS4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MAC_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
@@ -82,7 +88,6 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_DEBUG_INFO=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y

arch/powerpc/configs/mpc512x_defconfig

@@ -1,9 +1,9 @@
 CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -13,10 +13,11 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_PPC_CHRP is not set
 CONFIG_PPC_MPC512x=y
 CONFIG_MPC5121_ADS=y
+CONFIG_MPC5121_GENERIC=y
+CONFIG_PDM360NG=y
 # CONFIG_PPC_PMAC is not set
 CONFIG_NO_HZ=y
 CONFIG_HZ_1000=y
-CONFIG_SPARSE_IRQ=y
 # CONFIG_MIGRATION is not set
 # CONFIG_SECCOMP is not set
 # CONFIG_PCI is not set
@@ -35,18 +36,16 @@ CONFIG_CAN=y
 CONFIG_CAN_RAW=y
 CONFIG_CAN_BCM=y
 CONFIG_CAN_VCAN=y
-CONFIG_CAN_DEV=y
 CONFIG_CAN_MSCAN=y
 CONFIG_CAN_DEBUG_DEVICES=y
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
@@ -63,6 +62,7 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_XIP=y
 CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
@@ -99,10 +99,14 @@ CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_MPC512x_PSC=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MPC8XXX=y
 # CONFIG_HWMON is not set
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
 CONFIG_VIDEO_ADV_DEBUG=y
 # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
 CONFIG_VIDEO_SAA711X=y
@@ -132,6 +136,5 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set

arch/powerpc/configs/mpc5200_defconfig

@@ -88,6 +88,18 @@ CONFIG_FB_RADEON=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
+# CONFIG_SND_PPC is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_MPC5200_I2S=y
+CONFIG_SND_MPC52xx_SOC_PCM030=y
+CONFIG_SND_MPC52xx_SOC_EFIKA=y
 CONFIG_HID_DRAGONRISE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y

arch/powerpc/configs/mpc85xx_defconfig

@@ -10,10 +10,8 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
@@ -41,7 +39,6 @@ CONFIG_TQM8560=y
 CONFIG_SBC8548=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
-CONFIG_MPC8xxx_GPIO=y
 CONFIG_HIGHMEM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -123,6 +120,7 @@ CONFIG_NVRAM=y
 CONFIG_I2C=y
 CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
+CONFIG_GPIO_MPC8XXX=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
@@ -206,7 +204,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
 CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y

arch/powerpc/configs/mpc85xx_smp_defconfig

@@ -12,10 +12,8 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
@@ -42,7 +40,6 @@ CONFIG_TQM8560=y
 CONFIG_SBC8548=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
-CONFIG_MPC8xxx_GPIO=y
 CONFIG_HIGHMEM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -124,6 +121,7 @@ CONFIG_NVRAM=y
 CONFIG_I2C=y
 CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
+CONFIG_GPIO_MPC8XXX=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
@@ -207,10 +205,8 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
 CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_VIRQ_DEBUG=y
 CONFIG_CRYPTO_PCBC=m

arch/powerpc/configs/ppc40x_defconfig

@@ -14,7 +14,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_PPC4xx_GPIO=y
 CONFIG_ACADIA=y
 CONFIG_EP405=y
-CONFIG_HCU4=y
 CONFIG_HOTFOOT=y
 CONFIG_KILAUEA=y
 CONFIG_MAKALU=y

arch/powerpc/configs/ppc6xx_defconfig

@@ -70,7 +70,7 @@ CONFIG_TAU_AVERAGE=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_PPC_BESTCOMM=y
-CONFIG_MPC8xxx_GPIO=y
+CONFIG_GPIO_MPC8XXX=y
 CONFIG_MCU_MPC8349EMITX=m
 CONFIG_HIGHMEM=y
 CONFIG_NO_HZ=y

arch/powerpc/include/asm/device.h

@@ -37,4 +37,6 @@ struct pdev_archdata {
 	u64 dma_mask;
 };
 
+#define ARCH_HAS_DMA_GET_REQUIRED_MASK
+
 #endif /* _ASM_POWERPC_DEVICE_H */

arch/powerpc/include/asm/firmware.h

@@ -48,6 +48,8 @@
 #define FW_FEATURE_CMO		ASM_CONST(0x0000000002000000)
 #define FW_FEATURE_VPHN		ASM_CONST(0x0000000004000000)
 #define FW_FEATURE_XCMO		ASM_CONST(0x0000000008000000)
+#define FW_FEATURE_OPAL		ASM_CONST(0x0000000010000000)
+#define FW_FEATURE_OPALv2	ASM_CONST(0x0000000020000000)
 
 #ifndef __ASSEMBLY__
 
@@ -65,6 +67,8 @@ enum {
 	FW_FEATURE_PSERIES_ALWAYS = 0,
 	FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
 	FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
+	FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2,
+	FW_FEATURE_POWERNV_ALWAYS = 0,
 	FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
 	FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
 	FW_FEATURE_CELLEB_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_BEAT,
@@ -78,6 +82,9 @@ enum {
 #ifdef CONFIG_PPC_ISERIES
 		FW_FEATURE_ISERIES_POSSIBLE |
 #endif
+#ifdef CONFIG_PPC_POWERNV
+		FW_FEATURE_POWERNV_POSSIBLE |
+#endif
 #ifdef CONFIG_PPC_PS3
 		FW_FEATURE_PS3_POSSIBLE |
 #endif
@@ -95,6 +102,9 @@ enum {
 #ifdef CONFIG_PPC_ISERIES
 		FW_FEATURE_ISERIES_ALWAYS &
 #endif
+#ifdef CONFIG_PPC_POWERNV
+		FW_FEATURE_POWERNV_ALWAYS &
+#endif
 #ifdef CONFIG_PPC_PS3
 		FW_FEATURE_PS3_ALWAYS &
 #endif

arch/powerpc/include/asm/hugetlb.h

@@ -1,15 +1,60 @@
 #ifndef _ASM_POWERPC_HUGETLB_H
 #define _ASM_POWERPC_HUGETLB_H
 
+#ifdef CONFIG_HUGETLB_PAGE
 #include <asm/page.h>
 
+extern struct kmem_cache *hugepte_cache;
+extern void __init reserve_hugetlb_gpages(void);
+
+static inline pte_t *hugepd_page(hugepd_t hpd)
+{
+	BUG_ON(!hugepd_ok(hpd));
+	return (pte_t *)((hpd.pd & ~HUGEPD_SHIFT_MASK) | PD_HUGE);
+}
+
+static inline unsigned int hugepd_shift(hugepd_t hpd)
+{
+	return hpd.pd & HUGEPD_SHIFT_MASK;
+}
+
+static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr,
+				    unsigned pdshift)
+{
+	/*
+	 * On 32-bit, we have multiple higher-level table entries that point to
+	 * the same hugepte.  Just use the first one since they're all
+	 * identical.  So for that case, idx=0.
+	 */
+	unsigned long idx = 0;
+
+	pte_t *dir = hugepd_page(*hpdp);
+#ifdef CONFIG_PPC64
+	idx = (addr & ((1UL << pdshift) - 1)) >> hugepd_shift(*hpdp);
+#endif
+
+	return dir + idx;
+}
+
 pte_t *huge_pte_offset_and_shift(struct mm_struct *mm,
 				 unsigned long addr, unsigned *shift);
 
 void flush_dcache_icache_hugepage(struct page *page);
 
+#if defined(CONFIG_PPC_MM_SLICES) || defined(CONFIG_PPC_SUBPAGE_PROT)
 int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
 			   unsigned long len);
+#else
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+					 unsigned long addr,
+					 unsigned long len)
+{
+	return 0;
+}
+#endif
+
+void book3e_hugetlb_preload(struct mm_struct *mm, unsigned long ea, pte_t pte);
+void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
 
 void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
 			    unsigned long end, unsigned long floor,
@@ -50,8 +95,11 @@ static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
 					    unsigned long addr, pte_t *ptep)
 {
-	unsigned long old = pte_update(mm, addr, ptep, ~0UL, 1);
-	return __pte(old);
+#ifdef CONFIG_PPC64
+	return __pte(pte_update(mm, addr, ptep, ~0UL, 1));
+#else
+	return __pte(pte_update(ptep, ~0UL, 0));
+#endif
 }
 
 static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
@@ -93,4 +141,15 @@ static inline void arch_release_hugepage(struct page *page)
 {
 }
 
+#else /* ! CONFIG_HUGETLB_PAGE */
+static inline void reserve_hugetlb_gpages(void)
+{
+	pr_err("Cannot reserve gpages without hugetlb enabled\n");
+}
+static inline void flush_hugetlb_page(struct vm_area_struct *vma,
+				      unsigned long vmaddr)
+{
+}
+#endif
+
 #endif /* _ASM_POWERPC_HUGETLB_H */

arch/powerpc/include/asm/kexec.h

@@ -2,7 +2,7 @@
 #define _ASM_POWERPC_KEXEC_H
 #ifdef __KERNEL__
 
-#ifdef CONFIG_FSL_BOOKE
+#if defined(CONFIG_FSL_BOOKE) || defined(CONFIG_44x)
 
 /*
  * On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory

arch/powerpc/include/asm/machdep.h

@@ -85,8 +85,9 @@ struct machdep_calls {
 	void		(*pci_dma_dev_setup)(struct pci_dev *dev);
 	void		(*pci_dma_bus_setup)(struct pci_bus *bus);
 
-	/* Platform set_dma_mask override */
+	/* Platform set_dma_mask and dma_get_required_mask overrides */
 	int		(*dma_set_mask)(struct device *dev, u64 dma_mask);
+	u64		(*dma_get_required_mask)(struct device *dev);
 
 	int		(*probe)(void);
 	void		(*setup_arch)(void); /* Optional, may be NULL */

arch/powerpc/include/asm/mmu-book3e.h

@@ -66,6 +66,7 @@
 #define MAS2_M			0x00000004
 #define MAS2_G			0x00000002
 #define MAS2_E			0x00000001
+#define MAS2_WIMGE_MASK		0x0000001f
 #define MAS2_EPN_MASK(size)		(~0 << (size + 10))
 #define MAS2_VAL(addr, size, flags)	((addr) & MAS2_EPN_MASK(size) | (flags))
 
@@ -80,6 +81,7 @@
 #define MAS3_SW			0x00000004
 #define MAS3_UR			0x00000002
 #define MAS3_SR			0x00000001
+#define MAS3_BAP_MASK		0x0000003f
 #define MAS3_SPSIZE		0x0000003e
 #define MAS3_SPSIZE_SHIFT	1
 
@@ -212,6 +214,11 @@ typedef struct {
 	unsigned int	id;
 	unsigned int	active;
 	unsigned long	vdso_base;
+#ifdef CONFIG_PPC_MM_SLICES
+	u64 low_slices_psize;   /* SLB page size encodings */
+	u64 high_slices_psize;  /* 4 bits per slice for now */
+	u16 user_psize;         /* page size index */
+#endif
 } mm_context_t;
 
 /* Page size definitions, common between 32 and 64-bit

arch/powerpc/include/asm/mmu-hash64.h

@@ -262,8 +262,7 @@ extern void hash_failure_debug(unsigned long ea, unsigned long access,
 extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 			     unsigned long pstart, unsigned long prot,
 			     int psize, int ssize);
-extern void add_gpage(unsigned long addr, unsigned long page_size,
-			  unsigned long number_of_pages);
+extern void add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages);
 extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
 
 extern void hpte_init_native(void);

arch/powerpc/include/asm/mmu.h

@@ -175,14 +175,16 @@ extern u64 ppc64_rma_size;
 #define MMU_PAGE_64K_AP	3	/* "Admixed pages" (hash64 only) */
 #define MMU_PAGE_256K	4
 #define MMU_PAGE_1M	5
-#define MMU_PAGE_8M	6
-#define MMU_PAGE_16M	7
-#define MMU_PAGE_256M	8
-#define MMU_PAGE_1G	9
-#define MMU_PAGE_16G	10
-#define MMU_PAGE_64G	11
-#define MMU_PAGE_COUNT	12
-
+#define MMU_PAGE_4M	6
+#define MMU_PAGE_8M	7
+#define MMU_PAGE_16M	8
+#define MMU_PAGE_64M	9
+#define MMU_PAGE_256M	10
+#define MMU_PAGE_1G	11
+#define MMU_PAGE_16G	12
+#define MMU_PAGE_64G	13
+
+#define MMU_PAGE_COUNT	14
 
 #if defined(CONFIG_PPC_STD_MMU_64)
 /* 64-bit classic hash table MMU */

arch/powerpc/include/asm/mpic.h

@@ -273,8 +273,6 @@ struct mpic
 	unsigned int		irq_count;
 	/* Number of sources */
 	unsigned int		num_sources;
-	/* Number of CPUs */
-	unsigned int		num_cpus;
 	/* default senses array */
 	unsigned char		*senses;
 	unsigned int		senses_count;

arch/powerpc/include/asm/opal.h

@@ -0,0 +1,443 @@
+/*
+ * PowerNV OPAL definitions.
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __OPAL_H
+#define __OPAL_H
+
+/****** Takeover interface ********/
+
+/* PAPR H-Call used to querty the HAL existence and/or instanciate
+ * it from within pHyp (tech preview only).
+ *
+ * This is exclusively used in prom_init.c
+ */
+
+#ifndef __ASSEMBLY__
+
+struct opal_takeover_args {
+	u64	k_image;		/* r4 */
+	u64	k_size;			/* r5 */
+	u64	k_entry;		/* r6 */
+	u64	k_entry2;		/* r7 */
+	u64	hal_addr;		/* r8 */
+	u64	rd_image;		/* r9 */
+	u64	rd_size;		/* r10 */
+	u64	rd_loc;			/* r11 */
+};
+
+extern long opal_query_takeover(u64 *hal_size, u64 *hal_align);
+
+extern long opal_do_takeover(struct opal_takeover_args *args);
+
+struct rtas_args;
+extern int opal_enter_rtas(struct rtas_args *args,
+			   unsigned long data,
+			   unsigned long entry);
+
+#endif /* __ASSEMBLY__ */
+
+/****** OPAL APIs ******/
+
+/* Return codes */
+#define OPAL_SUCCESS 		0
+#define OPAL_PARAMETER		-1
+#define OPAL_BUSY		-2
+#define OPAL_PARTIAL		-3
+#define OPAL_CONSTRAINED	-4
+#define OPAL_CLOSED		-5
+#define OPAL_HARDWARE		-6
+#define OPAL_UNSUPPORTED	-7
+#define OPAL_PERMISSION		-8
+#define OPAL_NO_MEM		-9
+#define OPAL_RESOURCE		-10
+#define OPAL_INTERNAL_ERROR	-11
+#define OPAL_BUSY_EVENT		-12
+#define OPAL_HARDWARE_FROZEN	-13
+
+/* API Tokens (in r0) */
+#define OPAL_CONSOLE_WRITE			1
+#define OPAL_CONSOLE_READ			2
+#define OPAL_RTC_READ				3
+#define OPAL_RTC_WRITE				4
+#define OPAL_CEC_POWER_DOWN			5
+#define OPAL_CEC_REBOOT				6
+#define OPAL_READ_NVRAM				7
+#define OPAL_WRITE_NVRAM			8
+#define OPAL_HANDLE_INTERRUPT			9
+#define OPAL_POLL_EVENTS			10
+#define OPAL_PCI_SET_HUB_TCE_MEMORY		11
+#define OPAL_PCI_SET_PHB_TCE_MEMORY		12
+#define OPAL_PCI_CONFIG_READ_BYTE		13
+#define OPAL_PCI_CONFIG_READ_HALF_WORD  	14
+#define OPAL_PCI_CONFIG_READ_WORD		15
+#define OPAL_PCI_CONFIG_WRITE_BYTE		16
+#define OPAL_PCI_CONFIG_WRITE_HALF_WORD		17
+#define OPAL_PCI_CONFIG_WRITE_WORD		18
+#define OPAL_SET_XIVE				19
+#define OPAL_GET_XIVE				20
+#define OPAL_GET_COMPLETION_TOKEN_STATUS	21 /* obsolete */
+#define OPAL_REGISTER_OPAL_EXCEPTION_HANDLER	22
+#define OPAL_PCI_EEH_FREEZE_STATUS		23
+#define OPAL_PCI_SHPC				24
+#define OPAL_CONSOLE_WRITE_BUFFER_SPACE		25
+#define OPAL_PCI_EEH_FREEZE_CLEAR		26
+#define OPAL_PCI_PHB_MMIO_ENABLE		27
+#define OPAL_PCI_SET_PHB_MEM_WINDOW		28
+#define OPAL_PCI_MAP_PE_MMIO_WINDOW		29
+#define OPAL_PCI_SET_PHB_TABLE_MEMORY		30
+#define OPAL_PCI_SET_PE				31
+#define OPAL_PCI_SET_PELTV			32
+#define OPAL_PCI_SET_MVE			33
+#define OPAL_PCI_SET_MVE_ENABLE			34
+#define OPAL_PCI_GET_XIVE_REISSUE		35
+#define OPAL_PCI_SET_XIVE_REISSUE		36
+#define OPAL_PCI_SET_XIVE_PE			37
+#define OPAL_GET_XIVE_SOURCE			38
+#define OPAL_GET_MSI_32				39
+#define OPAL_GET_MSI_64				40
+#define OPAL_START_CPU				41
+#define OPAL_QUERY_CPU_STATUS			42
+#define OPAL_WRITE_OPPANEL			43
+#define OPAL_PCI_MAP_PE_DMA_WINDOW		44
+#define OPAL_PCI_MAP_PE_DMA_WINDOW_REAL		45
+#define OPAL_PCI_RESET				49
+
+#ifndef __ASSEMBLY__
+
+/* Other enums */
+enum OpalVendorApiTokens {
+	OPAL_START_VENDOR_API_RANGE = 1000, OPAL_END_VENDOR_API_RANGE = 1999
+};
+enum OpalFreezeState {
+	OPAL_EEH_STOPPED_NOT_FROZEN = 0,
+	OPAL_EEH_STOPPED_MMIO_FREEZE = 1,
+	OPAL_EEH_STOPPED_DMA_FREEZE = 2,
+	OPAL_EEH_STOPPED_MMIO_DMA_FREEZE = 3,
+	OPAL_EEH_STOPPED_RESET = 4,
+	OPAL_EEH_STOPPED_TEMP_UNAVAIL = 5,
+	OPAL_EEH_STOPPED_PERM_UNAVAIL = 6
+};
+enum OpalEehFreezeActionToken {
+	OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO = 1,
+	OPAL_EEH_ACTION_CLEAR_FREEZE_DMA = 2,
+	OPAL_EEH_ACTION_CLEAR_FREEZE_ALL = 3
+};
+enum OpalPciStatusToken {
+	OPAL_EEH_PHB_NO_ERROR = 0,
+	OPAL_EEH_PHB_FATAL = 1,
+	OPAL_EEH_PHB_RECOVERABLE = 2,
+	OPAL_EEH_PHB_BUS_ERROR = 3,
+	OPAL_EEH_PCI_NO_DEVSEL = 4,
+	OPAL_EEH_PCI_TA = 5,
+	OPAL_EEH_PCIEX_UR = 6,
+	OPAL_EEH_PCIEX_CA = 7,
+	OPAL_EEH_PCI_MMIO_ERROR = 8,
+	OPAL_EEH_PCI_DMA_ERROR = 9
+};
+enum OpalShpcAction {
+	OPAL_SHPC_GET_LINK_STATE = 0,
+	OPAL_SHPC_GET_SLOT_STATE = 1
+};
+enum OpalShpcLinkState {
+	OPAL_SHPC_LINK_DOWN = 0,
+	OPAL_SHPC_LINK_UP = 1
+};
+enum OpalMmioWindowType {
+	OPAL_M32_WINDOW_TYPE = 1,
+	OPAL_M64_WINDOW_TYPE = 2,
+	OPAL_IO_WINDOW_TYPE = 3
+};
+enum OpalShpcSlotState {
+	OPAL_SHPC_DEV_NOT_PRESENT = 0,
+	OPAL_SHPC_DEV_PRESENT = 1
+};
+enum OpalExceptionHandler {
+	OPAL_MACHINE_CHECK_HANDLER = 1,
+	OPAL_HYPERVISOR_MAINTENANCE_HANDLER = 2,
+	OPAL_SOFTPATCH_HANDLER = 3
+};
+enum OpalPendingState {
+	OPAL_EVENT_OPAL_INTERNAL = 0x1,
+	OPAL_EVENT_NVRAM = 0x2,
+	OPAL_EVENT_RTC = 0x4,
+	OPAL_EVENT_CONSOLE_OUTPUT = 0x8,
+	OPAL_EVENT_CONSOLE_INPUT = 0x10
+};
+
+/* Machine check related definitions */
+enum OpalMCE_Version {
+	OpalMCE_V1 = 1,
+};
+
+enum OpalMCE_Severity {
+	OpalMCE_SEV_NO_ERROR = 0,
+	OpalMCE_SEV_WARNING = 1,
+	OpalMCE_SEV_ERROR_SYNC = 2,
+	OpalMCE_SEV_FATAL = 3,
+};
+
+enum OpalMCE_Disposition {
+	OpalMCE_DISPOSITION_RECOVERED = 0,
+	OpalMCE_DISPOSITION_NOT_RECOVERED = 1,
+};
+
+enum OpalMCE_Initiator {
+	OpalMCE_INITIATOR_UNKNOWN = 0,
+	OpalMCE_INITIATOR_CPU = 1,
+};
+
+enum OpalMCE_ErrorType {
+	OpalMCE_ERROR_TYPE_UNKNOWN = 0,
+	OpalMCE_ERROR_TYPE_UE = 1,
+	OpalMCE_ERROR_TYPE_SLB = 2,
+	OpalMCE_ERROR_TYPE_ERAT = 3,
+	OpalMCE_ERROR_TYPE_TLB = 4,
+};
+
+enum OpalMCE_UeErrorType {
+	OpalMCE_UE_ERROR_INDETERMINATE = 0,
+	OpalMCE_UE_ERROR_IFETCH = 1,
+	OpalMCE_UE_ERROR_PAGE_TABLE_WALK_IFETCH = 2,
+	OpalMCE_UE_ERROR_LOAD_STORE = 3,
+	OpalMCE_UE_ERROR_PAGE_TABLE_WALK_LOAD_STORE = 4,
+};
+
+enum OpalMCE_SlbErrorType {
+	OpalMCE_SLB_ERROR_INDETERMINATE = 0,
+	OpalMCE_SLB_ERROR_PARITY = 1,
+	OpalMCE_SLB_ERROR_MULTIHIT = 2,
+};
+
+enum OpalMCE_EratErrorType {
+	OpalMCE_ERAT_ERROR_INDETERMINATE = 0,
+	OpalMCE_ERAT_ERROR_PARITY = 1,
+	OpalMCE_ERAT_ERROR_MULTIHIT = 2,
+};
+
+enum OpalMCE_TlbErrorType {
+	OpalMCE_TLB_ERROR_INDETERMINATE = 0,
+	OpalMCE_TLB_ERROR_PARITY = 1,
+	OpalMCE_TLB_ERROR_MULTIHIT = 2,
+};
+
+enum OpalThreadStatus {
+	OPAL_THREAD_INACTIVE = 0x0,
+	OPAL_THREAD_STARTED = 0x1
+};
+
+enum OpalPciBusCompare {
+	OpalPciBusAny	= 0,	/* Any bus number match */
+	OpalPciBus3Bits	= 2,	/* Match top 3 bits of bus number */
+	OpalPciBus4Bits	= 3,	/* Match top 4 bits of bus number */
+	OpalPciBus5Bits	= 4,	/* Match top 5 bits of bus number */
+	OpalPciBus6Bits	= 5,	/* Match top 6 bits of bus number */
+	OpalPciBus7Bits	= 6,	/* Match top 7 bits of bus number */
+	OpalPciBusAll	= 7,	/* Match bus number exactly */
+};
+
+enum OpalDeviceCompare {
+	OPAL_IGNORE_RID_DEVICE_NUMBER = 0,
+	OPAL_COMPARE_RID_DEVICE_NUMBER = 1
+};
+
+enum OpalFuncCompare {
+	OPAL_IGNORE_RID_FUNCTION_NUMBER = 0,
+	OPAL_COMPARE_RID_FUNCTION_NUMBER = 1
+};
+
+enum OpalPeAction {
+	OPAL_UNMAP_PE = 0,
+	OPAL_MAP_PE = 1
+};
+
+enum OpalPciResetAndReinitScope {
+	OPAL_PHB_COMPLETE = 1, OPAL_PCI_LINK = 2, OPAL_PHB_ERROR = 3,
+	OPAL_PCI_HOT_RESET = 4, OPAL_PCI_FUNDAMENTAL_RESET = 5,
+	OPAL_PCI_IODA_RESET = 6,
+};
+
+enum OpalPciResetState { OPAL_DEASSERT_RESET = 0, OPAL_ASSERT_RESET = 1 };
+
+struct opal_machine_check_event {
+	enum OpalMCE_Version	version:8;	/* 0x00 */
+	uint8_t			in_use;		/* 0x01 */
+	enum OpalMCE_Severity	severity:8;	/* 0x02 */
+	enum OpalMCE_Initiator	initiator:8;	/* 0x03 */
+	enum OpalMCE_ErrorType	error_type:8;	/* 0x04 */
+	enum OpalMCE_Disposition disposition:8; /* 0x05 */
+	uint8_t			reserved_1[2];	/* 0x06 */
+	uint64_t		gpr3;		/* 0x08 */
+	uint64_t		srr0;		/* 0x10 */
+	uint64_t		srr1;		/* 0x18 */
+	union {					/* 0x20 */
+		struct {
+			enum OpalMCE_UeErrorType ue_error_type:8;
+			uint8_t		effective_address_provided;
+			uint8_t		physical_address_provided;
+			uint8_t		reserved_1[5];
+			uint64_t	effective_address;
+			uint64_t	physical_address;
+			uint8_t		reserved_2[8];
+		} ue_error;
+
+		struct {
+			enum OpalMCE_SlbErrorType slb_error_type:8;
+			uint8_t		effective_address_provided;
+			uint8_t		reserved_1[6];
+			uint64_t	effective_address;
+			uint8_t		reserved_2[16];
+		} slb_error;
+
+		struct {
+			enum OpalMCE_EratErrorType erat_error_type:8;
+			uint8_t		effective_address_provided;
+			uint8_t		reserved_1[6];
+			uint64_t	effective_address;
+			uint8_t		reserved_2[16];
+		} erat_error;
+
+		struct {
+			enum OpalMCE_TlbErrorType tlb_error_type:8;
+			uint8_t		effective_address_provided;
+			uint8_t		reserved_1[6];
+			uint64_t	effective_address;
+			uint8_t		reserved_2[16];
+		} tlb_error;
+	} u;
+};
+
+typedef struct oppanel_line {
+	/* XXX */
+} oppanel_line_t;
+
+/* API functions */
+int64_t opal_console_write(int64_t term_number, int64_t *length,
+			   const uint8_t *buffer);
+int64_t opal_console_read(int64_t term_number, int64_t *length,
+			  uint8_t *buffer);
+int64_t opal_console_write_buffer_space(int64_t term_number,
+					int64_t *length);
+int64_t opal_rtc_read(uint32_t *year_month_day,
+		      uint64_t *hour_minute_second_millisecond);
+int64_t opal_rtc_write(uint32_t year_month_day,
+		       uint64_t hour_minute_second_millisecond);
+int64_t opal_cec_power_down(uint64_t request);
+int64_t opal_cec_reboot(void);
+int64_t opal_read_nvram(uint64_t buffer, uint64_t size, uint64_t offset);
+int64_t opal_write_nvram(uint64_t buffer, uint64_t size, uint64_t offset);
+int64_t opal_handle_interrupt(uint64_t isn, uint64_t *outstanding_event_mask);
+int64_t opal_poll_events(uint64_t *outstanding_event_mask);
+int64_t opal_pci_set_hub_tce_memory(uint64_t hub_id, uint64_t tce_mem_addr,
+				    uint64_t tce_mem_size);
+int64_t opal_pci_set_phb_tce_memory(uint64_t phb_id, uint64_t tce_mem_addr,
+				    uint64_t tce_mem_size);
+int64_t opal_pci_config_read_byte(uint64_t phb_id, uint64_t bus_dev_func,
+				  uint64_t offset, uint8_t *data);
+int64_t opal_pci_config_read_half_word(uint64_t phb_id, uint64_t bus_dev_func,
+				       uint64_t offset, uint16_t *data);
+int64_t opal_pci_config_read_word(uint64_t phb_id, uint64_t bus_dev_func,
+				  uint64_t offset, uint32_t *data);
+int64_t opal_pci_config_write_byte(uint64_t phb_id, uint64_t bus_dev_func,
+				   uint64_t offset, uint8_t data);
+int64_t opal_pci_config_write_half_word(uint64_t phb_id, uint64_t bus_dev_func,
+					uint64_t offset, uint16_t data);
+int64_t opal_pci_config_write_word(uint64_t phb_id, uint64_t bus_dev_func,
+				   uint64_t offset, uint32_t data);
+int64_t opal_set_xive(uint32_t isn, uint16_t server, uint8_t priority);
+int64_t opal_get_xive(uint32_t isn, uint16_t *server, uint8_t *priority);
+int64_t opal_register_exception_handler(uint64_t opal_exception,
+					uint64_t handler_address,
+					uint64_t glue_cache_line);
+int64_t opal_pci_eeh_freeze_status(uint64_t phb_id, uint64_t pe_number,
+				   uint8_t *freeze_state,
+				   uint16_t *pci_error_type,
+				   uint64_t *phb_status);
+int64_t opal_pci_eeh_freeze_clear(uint64_t phb_id, uint64_t pe_number,
+				  uint64_t eeh_action_token);
+int64_t opal_pci_shpc(uint64_t phb_id, uint64_t shpc_action, uint8_t *state);
+
+
+
+int64_t opal_pci_phb_mmio_enable(uint64_t phb_id, uint16_t window_type,
+				 uint16_t window_num, uint16_t enable);
+int64_t opal_pci_set_phb_mem_window(uint64_t phb_id, uint16_t window_type,
+				    uint16_t window_num,
+				    uint64_t starting_real_address,
+				    uint64_t starting_pci_address,
+				    uint16_t segment_size);
+int64_t opal_pci_map_pe_mmio_window(uint64_t phb_id, uint16_t pe_number,
+				    uint16_t window_type, uint16_t window_num,
+				    uint16_t segment_num);
+int64_t opal_pci_set_phb_table_memory(uint64_t phb_id, uint64_t rtt_addr,
+				      uint64_t ivt_addr, uint64_t ivt_len,
+				      uint64_t reject_array_addr,
+				      uint64_t peltv_addr);
+int64_t opal_pci_set_pe(uint64_t phb_id, uint64_t pe_number, uint64_t bus_dev_func,
+			uint8_t bus_compare, uint8_t dev_compare, uint8_t func_compare,
+			uint8_t pe_action);
+int64_t opal_pci_set_peltv(uint64_t phb_id, uint32_t parent_pe, uint32_t child_pe,
+			   uint8_t state);
+int64_t opal_pci_set_mve(uint64_t phb_id, uint32_t mve_number, uint32_t pe_number);
+int64_t opal_pci_set_mve_enable(uint64_t phb_id, uint32_t mve_number,
+				uint32_t state);
+int64_t opal_pci_get_xive_reissue(uint64_t phb_id, uint32_t xive_number,
+				  uint8_t *p_bit, uint8_t *q_bit);
+int64_t opal_pci_set_xive_reissue(uint64_t phb_id, uint32_t xive_number,
+				  uint8_t p_bit, uint8_t q_bit);
+int64_t opal_pci_set_xive_pe(uint64_t phb_id, uint32_t pe_number,
+			     uint32_t xive_num);
+int64_t opal_get_xive_source(uint64_t phb_id, uint32_t xive_num,
+			     int32_t *interrupt_source_number);
+int64_t opal_get_msi_32(uint64_t phb_id, uint32_t mve_number, uint32_t xive_num,
+			uint8_t msi_range, uint32_t *msi_address,
+			uint32_t *message_data);
+int64_t opal_get_msi_64(uint64_t phb_id, uint32_t mve_number,
+			uint32_t xive_num, uint8_t msi_range,
+			uint64_t *msi_address, uint32_t *message_data);
+int64_t opal_start_cpu(uint64_t thread_number, uint64_t start_address);
+int64_t opal_query_cpu_status(uint64_t thread_number, uint8_t *thread_status);
+int64_t opal_write_oppanel(oppanel_line_t *lines, uint64_t num_lines);
+int64_t opal_pci_map_pe_dma_window(uint64_t phb_id, uint16_t pe_number, uint16_t window_id,
+				   uint16_t tce_levels, uint64_t tce_table_addr,
+				   uint64_t tce_table_size, uint64_t tce_page_size);
+int64_t opal_pci_map_pe_dma_window_real(uint64_t phb_id, uint16_t pe_number,
+					uint16_t dma_window_number, uint64_t pci_start_addr,
+					uint64_t pci_mem_size);
+int64_t opal_pci_reset(uint64_t phb_id, uint8_t reset_scope, uint8_t assert_state);
+
+/* Internal functions */
+extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data);
+
+extern int opal_get_chars(uint32_t vtermno, char *buf, int count);
+extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len);
+
+extern void hvc_opal_init_early(void);
+
+/* Internal functions */
+extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
+				   int depth, void *data);
+
+extern int opal_get_chars(uint32_t vtermno, char *buf, int count);
+extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len);
+
+extern void hvc_opal_init_early(void);
+
+struct rtc_time;
+extern int opal_set_rtc_time(struct rtc_time *tm);
+extern void opal_get_rtc_time(struct rtc_time *tm);
+extern unsigned long opal_get_boot_time(void);
+extern void opal_nvram_init(void);
+
+extern int opal_machine_check(struct pt_regs *regs);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __OPAL_H */

arch/powerpc/include/asm/paca.h

@@ -43,6 +43,7 @@ extern unsigned int debug_smp_processor_id(void); /* from linux/smp.h */
 #define get_slb_shadow()	(get_paca()->slb_shadow_ptr)
 
 struct task_struct;
+struct opal_machine_check_event;
 
 /*
  * Defines the layout of the paca.
@@ -135,6 +136,13 @@ struct paca_struct {
 	u8 io_sync;			/* writel() needs spin_unlock sync */
 	u8 irq_work_pending;		/* IRQ_WORK interrupt while soft-disable */
 
+#ifdef CONFIG_PPC_POWERNV
+	/* Pointer to OPAL machine check event structure set by the
+	 * early exception handler for use by high level C handler
+	 */
+	struct opal_machine_check_event *opal_mc_evt;
+#endif
+
 	/* Stuff for accurate time accounting */
 	u64 user_time;			/* accumulated usermode TB ticks */
 	u64 system_time;		/* accumulated system TB ticks */

arch/powerpc/include/asm/page.h

@@ -36,6 +36,18 @@
 
 #define PAGE_SIZE		(ASM_CONST(1) << PAGE_SHIFT)
 
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_HUGETLB_PAGE
+extern unsigned int HPAGE_SHIFT;
+#else
+#define HPAGE_SHIFT PAGE_SHIFT
+#endif
+#define HPAGE_SIZE		((1UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+#define HUGE_MAX_HSTATE		(MMU_PAGE_COUNT-1)
+#endif
+
 /* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */
 #define __HAVE_ARCH_GATE_AREA		1
 
@@ -158,6 +170,24 @@ extern phys_addr_t kernstart_addr;
 #define is_kernel_addr(x)	((x) >= PAGE_OFFSET)
 #endif
 
+/*
+ * Use the top bit of the higher-level page table entries to indicate whether
+ * the entries we point to contain hugepages.  This works because we know that
+ * the page tables live in kernel space.  If we ever decide to support having
+ * page tables at arbitrary addresses, this breaks and will have to change.
+ */
+#ifdef CONFIG_PPC64
+#define PD_HUGE 0x8000000000000000
+#else
+#define PD_HUGE 0x80000000
+#endif
+
+/*
+ * Some number of bits at the level of the page table that points to
+ * a hugepte are used to encode the size.  This masks those bits.
+ */
+#define HUGEPD_SHIFT_MASK     0x3f
+
 #ifndef __ASSEMBLY__
 
 #undef STRICT_MM_TYPECHECKS
@@ -243,7 +273,6 @@ typedef unsigned long pgprot_t;
 #endif
 
 typedef struct { signed long pd; } hugepd_t;
-#define HUGEPD_SHIFT_MASK     0x3f
 
 #ifdef CONFIG_HUGETLB_PAGE
 static inline int hugepd_ok(hugepd_t hpd)

arch/powerpc/include/asm/page_64.h

@@ -64,17 +64,6 @@ extern void copy_page(void *to, void *from);
 /* Log 2 of page table size */
 extern u64 ppc64_pft_size;
 
-/* Large pages size */
-#ifdef CONFIG_HUGETLB_PAGE
-extern unsigned int HPAGE_SHIFT;
-#else
-#define HPAGE_SHIFT PAGE_SHIFT
-#endif
-#define HPAGE_SIZE		((1UL) << HPAGE_SHIFT)
-#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
-#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
-#define HUGE_MAX_HSTATE		(MMU_PAGE_COUNT-1)
-
 #endif /* __ASSEMBLY__ */
 
 #ifdef CONFIG_PPC_MM_SLICES

arch/powerpc/include/asm/pte-book3e.h

@@ -72,6 +72,9 @@
 #define	PTE_RPN_SHIFT	(24)
 #endif
 
+#define PTE_WIMGE_SHIFT (19)
+#define PTE_BAP_SHIFT	(2)
+
 /* On 32-bit, we never clear the top part of the PTE */
 #ifdef CONFIG_PPC32
 #define _PTE_NONE_MASK	0xffffffff00000000ULL

arch/powerpc/include/asm/reg_booke.h

@@ -548,6 +548,9 @@
 #define L1CSR1_ICFI	0x00000002	/* Instr Cache Flash Invalidate */
 #define L1CSR1_ICE	0x00000001	/* Instr Cache Enable */
 
+/* Bit definitions for L1CSR2. */
+#define L1CSR2_DCWS	0x40000000	/* Data Cache write shadow */
+
 /* Bit definitions for L2CSR0. */
 #define L2CSR0_L2E	0x80000000	/* L2 Cache Enable */
 #define L2CSR0_L2PE	0x40000000	/* L2 Cache Parity/ECC Enable */

arch/powerpc/include/asm/rtas.h

@@ -249,10 +249,12 @@ extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
 #define ERR_FLAG_ALREADY_LOGGED	0x0
 #define ERR_FLAG_BOOT		0x1 	/* log was pulled from NVRAM on boot */
 #define ERR_TYPE_RTAS_LOG	0x2	/* from rtas event-scan */
-#define ERR_TYPE_KERNEL_PANIC	0x4	/* from panic() */
+#define ERR_TYPE_KERNEL_PANIC	0x4	/* from die()/panic() */
+#define ERR_TYPE_KERNEL_PANIC_GZ 0x8	/* ditto, compressed */
 
 /* All the types and not flags */
-#define ERR_TYPE_MASK	(ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC)
+#define ERR_TYPE_MASK \
+	(ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC | ERR_TYPE_KERNEL_PANIC_GZ)
 
 #define RTAS_DEBUG KERN_DEBUG "RTAS: "
  

arch/powerpc/include/asm/smp.h

@@ -65,6 +65,7 @@ int generic_cpu_disable(void);
 void generic_cpu_die(unsigned int cpu);
 void generic_mach_cpu_die(void);
 void generic_set_cpu_dead(unsigned int cpu);
+int generic_check_cpu_restart(unsigned int cpu);
 #endif
 
 #ifdef CONFIG_PPC64

arch/powerpc/include/asm/sparsemem.h

@@ -16,7 +16,7 @@
 #endif /* CONFIG_SPARSEMEM */
 
 #ifdef CONFIG_MEMORY_HOTPLUG
-extern void create_section_mapping(unsigned long start, unsigned long end);
+extern int create_section_mapping(unsigned long start, unsigned long end);
 extern int remove_section_mapping(unsigned long start, unsigned long end);
 #ifdef CONFIG_NUMA
 extern int hot_add_scn_to_nid(unsigned long scn_addr);

arch/powerpc/include/asm/topology.h

@@ -19,14 +19,10 @@ struct device_node;
 #define RECLAIM_DISTANCE 10
 
 /*
- * Before going off node we want the VM to try and reclaim from the local
- * node. It does this if the remote distance is larger than RECLAIM_DISTANCE.
- * With the default REMOTE_DISTANCE of 20 and the default RECLAIM_DISTANCE of
- * 20, we never reclaim and go off node straight away.
- *
- * To fix this we choose a smaller value of RECLAIM_DISTANCE.
+ * Avoid creating an extra level of balancing (SD_ALLNODES) on the largest
+ * POWER7 boxes which have a maximum of 32 nodes.
  */
-#define RECLAIM_DISTANCE 10
+#define SD_NODES_PER_DOMAIN 32
 
 #include <asm/mmzone.h>
 
@@ -69,11 +65,11 @@ static inline int pcibus_to_node(struct pci_bus *bus)
 	.forkexec_idx		= 0,					\
 									\
 	.flags			= 1*SD_LOAD_BALANCE			\
-				| 1*SD_BALANCE_NEWIDLE			\
+				| 0*SD_BALANCE_NEWIDLE			\
 				| 1*SD_BALANCE_EXEC			\
 				| 1*SD_BALANCE_FORK			\
 				| 0*SD_BALANCE_WAKE			\
-				| 0*SD_WAKE_AFFINE			\
+				| 1*SD_WAKE_AFFINE			\
 				| 0*SD_PREFER_LOCAL			\
 				| 0*SD_SHARE_CPUPOWER			\
 				| 0*SD_POWERSAVINGS_BALANCE		\

arch/powerpc/include/asm/udbg.h

@@ -55,6 +55,9 @@ extern void __init udbg_init_cpm(void);
 extern void __init udbg_init_usbgecko(void);
 extern void __init udbg_init_wsp(void);
 extern void __init udbg_init_ehv_bc(void);
+extern void __init udbg_init_ps3gelic(void);
+extern void __init udbg_init_debug_opal_raw(void);
+extern void __init udbg_init_debug_opal_hvsi(void);
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_UDBG_H */

arch/powerpc/include/asm/xics.h

@@ -27,10 +27,18 @@
 #define MAX_NUM_PRIORITIES	3
 
 /* Native ICP */
+#ifdef CONFIG_PPC_ICP_NATIVE
 extern int icp_native_init(void);
+#else
+static inline int icp_native_init(void) { return -ENODEV; }
+#endif
 
 /* PAPR ICP */
+#ifdef CONFIG_PPC_ICP_HV
 extern int icp_hv_init(void);
+#else
+static inline int icp_hv_init(void) { return -ENODEV; }
+#endif
 
 /* ICP ops */
 struct icp_ops {
@@ -51,7 +59,18 @@ extern const struct icp_ops *icp_ops;
 extern int ics_native_init(void);
 
 /* RTAS ICS */
+#ifdef CONFIG_PPC_ICS_RTAS
 extern int ics_rtas_init(void);
+#else
+static inline int ics_rtas_init(void) { return -ENODEV; }
+#endif
+
+/* HAL ICS */
+#ifdef CONFIG_PPC_POWERNV
+extern int ics_opal_init(void);
+#else
+static inline int ics_opal_init(void) { return -ENODEV; }
+#endif
 
 /* ICS instance, hooked up to chip_data of an irq */
 struct ics {

arch/powerpc/kernel/asm-offsets.c

@@ -49,6 +49,9 @@
 #ifdef CONFIG_PPC_ISERIES
 #include <asm/iseries/alpaca.h>
 #endif
+#ifdef CONFIG_PPC_POWERNV
+#include <asm/opal.h>
+#endif
 #if defined(CONFIG_KVM) || defined(CONFIG_KVM_GUEST)
 #include <linux/kvm_host.h>
 #endif
@@ -610,5 +613,12 @@ int main(void)
 					arch.timing_last_enter.tv32.tbl));
 #endif
 
+#ifdef CONFIG_PPC_POWERNV
+	DEFINE(OPAL_MC_GPR3, offsetof(struct opal_machine_check_event, gpr3));
+	DEFINE(OPAL_MC_SRR0, offsetof(struct opal_machine_check_event, srr0));
+	DEFINE(OPAL_MC_SRR1, offsetof(struct opal_machine_check_event, srr1));
+	DEFINE(PACA_OPAL_MC_EVT, offsetof(struct paca_struct, opal_mc_evt));
+#endif
+
 	return 0;
 }

arch/powerpc/kernel/dma-iommu.c

@@ -90,13 +90,27 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask)
 		return 1;
 }
 
+static u64 dma_iommu_get_required_mask(struct device *dev)
+{
+	struct iommu_table *tbl = get_iommu_table_base(dev);
+	u64 mask;
+	if (!tbl)
+		return 0;
+
+	mask = 1ULL < (fls_long(tbl->it_offset + tbl->it_size) - 1);
+	mask += mask - 1;
+
+	return mask;
+}
+
 struct dma_map_ops dma_iommu_ops = {
-	.alloc_coherent	= dma_iommu_alloc_coherent,
-	.free_coherent	= dma_iommu_free_coherent,
-	.map_sg		= dma_iommu_map_sg,
-	.unmap_sg	= dma_iommu_unmap_sg,
-	.dma_supported	= dma_iommu_dma_supported,
-	.map_page	= dma_iommu_map_page,
-	.unmap_page	= dma_iommu_unmap_page,
+	.alloc_coherent		= dma_iommu_alloc_coherent,
+	.free_coherent		= dma_iommu_free_coherent,
+	.map_sg			= dma_iommu_map_sg,
+	.unmap_sg		= dma_iommu_unmap_sg,
+	.dma_supported		= dma_iommu_dma_supported,
+	.map_page		= dma_iommu_map_page,
+	.unmap_page		= dma_iommu_unmap_page,
+	.get_required_mask	= dma_iommu_get_required_mask,
 };
 EXPORT_SYMBOL(dma_iommu_ops);

arch/powerpc/kernel/dma-swiotlb.c

@@ -24,6 +24,21 @@
 
 unsigned int ppc_swiotlb_enable;
 
+static u64 swiotlb_powerpc_get_required(struct device *dev)
+{
+	u64 end, mask, max_direct_dma_addr = dev->archdata.max_direct_dma_addr;
+
+	end = memblock_end_of_DRAM();
+	if (max_direct_dma_addr && end > max_direct_dma_addr)
+		end = max_direct_dma_addr;
+	end += get_dma_offset(dev);
+
+	mask = 1ULL << (fls64(end) - 1);
+	mask += mask - 1;
+
+	return mask;
+}
+
 /*
  * At the moment, all platforms that use this code only require
  * swiotlb to be used if we're operating on HIGHMEM.  Since
@@ -44,6 +59,7 @@ struct dma_map_ops swiotlb_dma_ops = {
 	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
 	.sync_sg_for_device = swiotlb_sync_sg_for_device,
 	.mapping_error = swiotlb_dma_mapping_error,
+	.get_required_mask = swiotlb_powerpc_get_required,
 };
 
 void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)

arch/powerpc/kernel/dma.c

@@ -96,6 +96,18 @@ static int dma_direct_dma_supported(struct device *dev, u64 mask)
 #endif
 }
 
+static u64 dma_direct_get_required_mask(struct device *dev)
+{
+	u64 end, mask;
+
+	end = memblock_end_of_DRAM() + get_dma_offset(dev);
+
+	mask = 1ULL << (fls64(end) - 1);
+	mask += mask - 1;
+
+	return mask;
+}
+
 static inline dma_addr_t dma_direct_map_page(struct device *dev,
 					     struct page *page,
 					     unsigned long offset,
@@ -137,13 +149,14 @@ static inline void dma_direct_sync_single(struct device *dev,
 #endif
 
 struct dma_map_ops dma_direct_ops = {
-	.alloc_coherent	= dma_direct_alloc_coherent,
-	.free_coherent	= dma_direct_free_coherent,
-	.map_sg		= dma_direct_map_sg,
-	.unmap_sg	= dma_direct_unmap_sg,
-	.dma_supported	= dma_direct_dma_supported,
-	.map_page	= dma_direct_map_page,
-	.unmap_page	= dma_direct_unmap_page,
+	.alloc_coherent			= dma_direct_alloc_coherent,
+	.free_coherent			= dma_direct_free_coherent,
+	.map_sg				= dma_direct_map_sg,
+	.unmap_sg			= dma_direct_unmap_sg,
+	.dma_supported			= dma_direct_dma_supported,
+	.map_page			= dma_direct_map_page,
+	.unmap_page			= dma_direct_unmap_page,
+	.get_required_mask		= dma_direct_get_required_mask,
 #ifdef CONFIG_NOT_COHERENT_CACHE
 	.sync_single_for_cpu 		= dma_direct_sync_single,
 	.sync_single_for_device 	= dma_direct_sync_single,
@@ -170,6 +183,23 @@ int dma_set_mask(struct device *dev, u64 dma_mask)
 }
 EXPORT_SYMBOL(dma_set_mask);
 
+u64 dma_get_required_mask(struct device *dev)
+{
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+	if (ppc_md.dma_get_required_mask)
+		return ppc_md.dma_get_required_mask(dev);
+
+	if (unlikely(dma_ops == NULL))
+		return 0;
+
+	if (dma_ops->get_required_mask)
+		return dma_ops->get_required_mask(dev);
+
+	return DMA_BIT_MASK(8 * sizeof(dma_addr_t));
+}
+EXPORT_SYMBOL_GPL(dma_get_required_mask);
+
 static int __init dma_init(void)
 {
        dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);

arch/powerpc/kernel/exceptions-64s.S

@@ -1133,7 +1133,7 @@ _GLOBAL(do_stab_bolted)
 	rfid
 	b	.	/* prevent speculative execution */
 
-#ifdef CONFIG_PPC_PSERIES
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
 /*
  * Data area reserved for FWNMI option.
  * This address (0x7000) is fixed by the RPA.
@@ -1141,7 +1141,7 @@ _GLOBAL(do_stab_bolted)
 	.= 0x7000
 	.globl fwnmi_data_area
 fwnmi_data_area:
-#endif /* CONFIG_PPC_PSERIES */
+#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
 
 	/* iSeries does not use the FWNMI stuff, so it is safe to put
 	 * this here, even if we later allow kernels that will boot on
@@ -1166,9 +1166,12 @@ xLparMap:
 
 #endif /* CONFIG_PPC_ISERIES */
 
-#ifdef CONFIG_PPC_PSERIES
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
+	/* pseries and powernv need to keep the whole page from
+	 * 0x7000 to 0x8000 free for use by the firmware
+	 */
         . = 0x8000
-#endif /* CONFIG_PPC_PSERIES */
+#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
 
 /*
  * Space for CPU0's segment table.
@@ -1183,3 +1186,19 @@ xLparMap:
 	.globl initial_stab
 initial_stab:
 	.space	4096
+#ifdef CONFIG_PPC_POWERNV
+_GLOBAL(opal_mc_secondary_handler)
+	HMT_MEDIUM
+	SET_SCRATCH0(r13)
+	GET_PACA(r13)
+	clrldi	r3,r3,2
+	tovirt(r3,r3)
+	std	r3,PACA_OPAL_MC_EVT(r13)
+	ld	r13,OPAL_MC_SRR0(r3)
+	mtspr	SPRN_SRR0,r13
+	ld	r13,OPAL_MC_SRR1(r3)
+	mtspr	SPRN_SRR1,r13
+	ld	r3,OPAL_MC_GPR3(r3)
+	GET_SCRATCH0(r13)
+	b	machine_check_pSeries
+#endif /* CONFIG_PPC_POWERNV */

arch/powerpc/kernel/head_32.S

@@ -139,8 +139,7 @@ __start:
 	trap
 #endif /* CONFIG_PPC_PMAC */
 
-1:	mr	r31,r3			/* save parameters */
-	mr	r30,r4
+1:	mr	r31,r3			/* save device tree ptr */
 	li	r24,0			/* cpu # */
 
 /*
@@ -964,8 +963,8 @@ start_here:
  * Do early platform-specific initialization,
  * and set up the MMU.
  */
-	mr	r3,r31
-	mr	r4,r30
+	li	r3,0
+	mr	r4,r31
 	bl	machine_init
 	bl	__save_cpu_setup
 	bl	MMU_init

arch/powerpc/kernel/head_40x.S

@@ -58,13 +58,7 @@
 _ENTRY(_stext);
 _ENTRY(_start);
 
-	/* Save parameters we are passed.
-	*/
-	mr	r31,r3
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
+	mr	r31,r3			/* save device tree ptr */
 
 	/* We have to turn on the MMU right away so we get cache modes
 	 * set correctly.
@@ -849,11 +843,8 @@ start_here:
 /*
  * Decide what sort of machine this is and initialize the MMU.
  */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
+	li	r3,0
+	mr	r4,r31
 	bl	machine_init
 	bl	MMU_init
 

arch/powerpc/kernel/head_44x.S

@@ -61,14 +61,7 @@ _ENTRY(_start);
 	 * of abatron_pteptrs
 	 */
 	nop
-/*
- * Save parameters we are passed
- */
-	mr	r31,r3
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
+	mr	r31,r3		/* save device tree ptr */
 	li	r24,0		/* CPU number */
 
 	bl	init_cpu_state
@@ -120,11 +113,8 @@ _ENTRY(_start);
 /*
  * Decide what sort of machine this is and initialize the MMU.
  */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
+	li	r3,0
+	mr	r4,r31
 	bl	machine_init
 	bl	MMU_init
 

arch/powerpc/kernel/head_64.S

@@ -51,6 +51,11 @@
  *  For pSeries or server processors:
  *   1. The MMU is off & open firmware is running in real mode.
  *   2. The kernel is entered at __start
+ * -or- For OPAL entry:
+ *   1. The MMU is off, processor in HV mode, primary CPU enters at 0
+ *      with device-tree in gpr3. We also get OPAL base in r8 and
+ *	entry in r9 for debugging purposes
+ *   2. Secondary processors enter at 0x60 with PIR in gpr3
  *
  *  For iSeries:
  *   1. The MMU is on (as it always is for iSeries)
@@ -331,6 +336,11 @@ _GLOBAL(__start_initialization_multiplatform)
 	/* Save parameters */
 	mr	r31,r3
 	mr	r30,r4
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
+	/* Save OPAL entry */
+	mr	r28,r8
+	mr	r29,r9
+#endif
 
 #ifdef CONFIG_PPC_BOOK3E
 	bl	.start_initialization_book3e
@@ -674,9 +684,9 @@ _GLOBAL(enable_64b_mode)
 _GLOBAL(relative_toc)
 	mflr	r0
 	bcl	20,31,$+4
-0:	mflr	r9
-	ld	r2,(p_toc - 0b)(r9)
-	add	r2,r2,r9
+0:	mflr	r11
+	ld	r2,(p_toc - 0b)(r11)
+	add	r2,r2,r11
 	mtlr	r0
 	blr
 
@@ -707,6 +717,12 @@ _INIT_STATIC(start_here_multiplatform)
 	bdnz	3b
 4:
 
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
+	/* Setup OPAL entry */
+	std	r28,0(r11);
+	std	r29,8(r11);
+#endif
+
 #ifndef CONFIG_PPC_BOOK3E
 	mfmsr	r6
 	ori	r6,r6,MSR_RI

arch/powerpc/kernel/head_8xx.S

@@ -76,11 +76,7 @@ _ENTRY(_start);
  */
 	.globl	__start
 __start:
-	mr	r31,r3			/* save parameters */
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
+	mr	r31,r3			/* save device tree ptr */
 
 	/* We have to turn on the MMU right away so we get cache modes
 	 * set correctly.
@@ -723,11 +719,8 @@ start_here:
 /*
  * Decide what sort of machine this is and initialize the MMU.
  */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
+	li	r3,0
+	mr	r4,r31
 	bl	machine_init
 	bl	MMU_init
 

arch/powerpc/kernel/head_fsl_booke.S

@@ -63,17 +63,30 @@ _ENTRY(_start);
 	 * of abatron_pteptrs
 	 */
 	nop
-/*
- * Save parameters we are passed
- */
-	mr	r31,r3
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
-	li	r25,0		/* phys kernel start (low) */
-	li	r24,0		/* CPU number */
-	li	r23,0		/* phys kernel start (high) */
+
+	/* Translate device tree address to physical, save in r30/r31 */
+	mfmsr	r16
+	mfspr	r17,SPRN_PID
+	rlwinm	r17,r17,16,0x3fff0000	/* turn PID into MAS6[SPID] */
+	rlwimi	r17,r16,28,0x00000001	/* turn MSR[DS] into MAS6[SAS] */
+	mtspr	SPRN_MAS6,r17
+
+	tlbsx	0,r3			/* must succeed */
+
+	mfspr	r16,SPRN_MAS1
+	mfspr	r20,SPRN_MAS3
+	rlwinm	r17,r16,25,0x1f		/* r17 = log2(page size) */
+	li	r18,1024
+	slw	r18,r18,r17		/* r18 = page size */
+	addi	r18,r18,-1
+	and	r19,r3,r18		/* r19 = page offset */
+	andc	r31,r20,r18		/* r31 = page base */
+	or	r31,r31,r19		/* r31 = devtree phys addr */
+	mfspr	r30,SPRN_MAS7
+
+	li	r25,0			/* phys kernel start (low) */
+	li	r24,0			/* CPU number */
+	li	r23,0			/* phys kernel start (high) */
 
 /* We try to not make any assumptions about how the boot loader
  * setup or used the TLBs.  We invalidate all mappings from the
@@ -198,11 +211,8 @@ _ENTRY(__early_start)
 /*
  * Decide what sort of machine this is and initialize the MMU.
  */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
+	mr	r3,r30
+	mr	r4,r31
 	bl	machine_init
 	bl	MMU_init
 
@@ -236,8 +246,24 @@ _ENTRY(__early_start)
  * if we find the pte (fall through):
  *   r11 is low pte word
  *   r12 is pointer to the pte
+ *   r10 is the pshift from the PGD, if we're a hugepage
  */
 #ifdef CONFIG_PTE_64BIT
+#ifdef CONFIG_HUGETLB_PAGE
+#define FIND_PTE	\
+	rlwinm	r12, r10, 13, 19, 29;	/* Compute pgdir/pmd offset */	\
+	lwzx	r11, r12, r11;		/* Get pgd/pmd entry */		\
+	rlwinm.	r12, r11, 0, 0, 20;	/* Extract pt base address */	\
+	blt	1000f;			/* Normal non-huge page */	\
+	beq	2f;			/* Bail if no table */		\
+	oris	r11, r11, PD_HUGE@h;	/* Put back address bit */	\
+	andi.	r10, r11, HUGEPD_SHIFT_MASK@l; /* extract size field */	\
+	xor	r12, r10, r11;		/* drop size bits from pointer */ \
+	b	1001f;							\
+1000:	rlwimi	r12, r10, 23, 20, 28;	/* Compute pte address */	\
+	li	r10, 0;			/* clear r10 */			\
+1001:	lwz	r11, 4(r12);		/* Get pte entry */
+#else
 #define FIND_PTE	\
 	rlwinm	r12, r10, 13, 19, 29;	/* Compute pgdir/pmd offset */	\
 	lwzx	r11, r12, r11;		/* Get pgd/pmd entry */		\
@@ -245,7 +271,8 @@ _ENTRY(__early_start)
 	beq	2f;			/* Bail if no table */		\
 	rlwimi	r12, r10, 23, 20, 28;	/* Compute pte address */	\
 	lwz	r11, 4(r12);		/* Get pte entry */
-#else
+#endif /* HUGEPAGE */
+#else /* !PTE_64BIT */
 #define FIND_PTE	\
 	rlwimi	r11, r10, 12, 20, 29;	/* Create L1 (pgdir/pmd) address */	\
 	lwz	r11, 0(r11);		/* Get L1 entry */			\
@@ -402,8 +429,8 @@ interrupt_base:
 
 #ifdef CONFIG_PTE_64BIT
 #ifdef CONFIG_SMP
-	subf	r10,r11,r12		/* create false data dep */
-	lwzx	r13,r11,r10		/* Get upper pte bits */
+	subf	r13,r11,r12		/* create false data dep */
+	lwzx	r13,r11,r13		/* Get upper pte bits */
 #else
 	lwz	r13,0(r12)		/* Get upper pte bits */
 #endif
@@ -483,8 +510,8 @@ interrupt_base:
 
 #ifdef CONFIG_PTE_64BIT
 #ifdef CONFIG_SMP
-	subf	r10,r11,r12		/* create false data dep */
-	lwzx	r13,r11,r10		/* Get upper pte bits */
+	subf	r13,r11,r12		/* create false data dep */
+	lwzx	r13,r11,r13		/* Get upper pte bits */
 #else
 	lwz	r13,0(r12)		/* Get upper pte bits */
 #endif
@@ -548,7 +575,7 @@ interrupt_base:
 /*
  * Both the instruction and data TLB miss get to this
  * point to load the TLB.
- *	r10 - available to use
+ *	r10 - tsize encoding (if HUGETLB_PAGE) or available to use
  *	r11 - TLB (info from Linux PTE)
  *	r12 - available to use
  *	r13 - upper bits of PTE (if PTE_64BIT) or available to use
@@ -558,21 +585,73 @@ interrupt_base:
  *	Upon exit, we reload everything and RFI.
  */
 finish_tlb_load:
+#ifdef CONFIG_HUGETLB_PAGE
+	cmpwi	6, r10, 0			/* check for huge page */
+	beq	6, finish_tlb_load_cont    	/* !huge */
+
+	/* Alas, we need more scratch registers for hugepages */
+	mfspr	r12, SPRN_SPRG_THREAD
+	stw	r14, THREAD_NORMSAVE(4)(r12)
+	stw	r15, THREAD_NORMSAVE(5)(r12)
+	stw	r16, THREAD_NORMSAVE(6)(r12)
+	stw	r17, THREAD_NORMSAVE(7)(r12)
+
+	/* Get the next_tlbcam_idx percpu var */
+#ifdef CONFIG_SMP
+	lwz	r12, THREAD_INFO-THREAD(r12)
+	lwz	r15, TI_CPU(r12)
+	lis     r14, __per_cpu_offset@h
+	ori     r14, r14, __per_cpu_offset@l
+	rlwinm  r15, r15, 2, 0, 29
+	lwzx    r16, r14, r15
+#else
+	li	r16, 0
+#endif
+	lis     r17, next_tlbcam_idx@h
+	ori	r17, r17, next_tlbcam_idx@l
+	add	r17, r17, r16			/* r17 = *next_tlbcam_idx */
+	lwz     r15, 0(r17)			/* r15 = next_tlbcam_idx */
+
+	lis	r14, MAS0_TLBSEL(1)@h		/* select TLB1 (TLBCAM) */
+	rlwimi	r14, r15, 16, 4, 15		/* next_tlbcam_idx entry */
+	mtspr	SPRN_MAS0, r14
+
+	/* Extract TLB1CFG(NENTRY) */
+	mfspr	r16, SPRN_TLB1CFG
+	andi.	r16, r16, 0xfff
+
+	/* Update next_tlbcam_idx, wrapping when necessary */
+	addi	r15, r15, 1
+	cmpw	r15, r16
+	blt 	100f
+	lis	r14, tlbcam_index@h
+	ori	r14, r14, tlbcam_index@l
+	lwz	r15, 0(r14)
+100:	stw	r15, 0(r17)
+
+	/*
+	 * Calc MAS1_TSIZE from r10 (which has pshift encoded)
+	 * tlb_enc = (pshift - 10).
+	 */
+	subi	r15, r10, 10
+	mfspr	r16, SPRN_MAS1
+	rlwimi	r16, r15, 7, 20, 24
+	mtspr	SPRN_MAS1, r16
+
+	/* copy the pshift for use later */
+	mr	r14, r10
+
+	/* fall through */
+
+#endif /* CONFIG_HUGETLB_PAGE */
+
 	/*
 	 * We set execute, because we don't have the granularity to
 	 * properly set this at the page level (Linux problem).
 	 * Many of these bits are software only.  Bits we don't set
 	 * here we (properly should) assume have the appropriate value.
 	 */
-
-	mfspr	r12, SPRN_MAS2
-#ifdef CONFIG_PTE_64BIT
-	rlwimi	r12, r11, 32-19, 27, 31	/* extract WIMGE from pte */
-#else
-	rlwimi	r12, r11, 26, 27, 31	/* extract WIMGE from pte */
-#endif
-	mtspr	SPRN_MAS2, r12
-
+finish_tlb_load_cont:
 #ifdef CONFIG_PTE_64BIT
 	rlwinm	r12, r11, 32-2, 26, 31	/* Move in perm bits */
 	andi.	r10, r11, _PAGE_DIRTY
@@ -581,22 +660,40 @@ finish_tlb_load:
 	andc	r12, r12, r10
 1:	rlwimi	r12, r13, 20, 0, 11	/* grab RPN[32:43] */
 	rlwimi	r12, r11, 20, 12, 19	/* grab RPN[44:51] */
-	mtspr	SPRN_MAS3, r12
+2:	mtspr	SPRN_MAS3, r12
 BEGIN_MMU_FTR_SECTION
 	srwi	r10, r13, 12		/* grab RPN[12:31] */
 	mtspr	SPRN_MAS7, r10
 END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
 #else
 	li	r10, (_PAGE_EXEC | _PAGE_PRESENT)
+	mr	r13, r11
 	rlwimi	r10, r11, 31, 29, 29	/* extract _PAGE_DIRTY into SW */
 	and	r12, r11, r10
 	andi.	r10, r11, _PAGE_USER	/* Test for _PAGE_USER */
 	slwi	r10, r12, 1
 	or	r10, r10, r12
 	iseleq	r12, r12, r10
-	rlwimi	r11, r12, 0, 20, 31	/* Extract RPN from PTE and merge with perms */
-	mtspr	SPRN_MAS3, r11
+	rlwimi	r13, r12, 0, 20, 31	/* Get RPN from PTE, merge w/ perms */
+	mtspr	SPRN_MAS3, r13
 #endif
+
+	mfspr	r12, SPRN_MAS2
+#ifdef CONFIG_PTE_64BIT
+	rlwimi	r12, r11, 32-19, 27, 31	/* extract WIMGE from pte */
+#else
+	rlwimi	r12, r11, 26, 27, 31	/* extract WIMGE from pte */
+#endif
+#ifdef CONFIG_HUGETLB_PAGE
+	beq	6, 3f			/* don't mask if page isn't huge */
+	li	r13, 1
+	slw	r13, r13, r14
+	subi	r13, r13, 1
+	rlwinm	r13, r13, 0, 0, 19	/* bottom bits used for WIMGE/etc */
+	andc	r12, r12, r13		/* mask off ea bits within the page */
+#endif
+3:	mtspr	SPRN_MAS2, r12
+
 #ifdef CONFIG_E200
 	/* Round robin TLB1 entries assignment */
 	mfspr	r12, SPRN_MAS0
@@ -622,11 +719,19 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
 	mtspr	SPRN_MAS0,r12
 #endif /* CONFIG_E200 */
 
+tlb_write_entry:
 	tlbwe
 
 	/* Done...restore registers and get out of here.  */
 	mfspr	r10, SPRN_SPRG_THREAD
-	lwz	r11, THREAD_NORMSAVE(3)(r10)
+#ifdef CONFIG_HUGETLB_PAGE
+	beq	6, 8f /* skip restore for 4k page faults */
+	lwz	r14, THREAD_NORMSAVE(4)(r10)
+	lwz	r15, THREAD_NORMSAVE(5)(r10)
+	lwz	r16, THREAD_NORMSAVE(6)(r10)
+	lwz	r17, THREAD_NORMSAVE(7)(r10)
+#endif
+8:	lwz	r11, THREAD_NORMSAVE(3)(r10)
 	mtcr	r11
 	lwz	r13, THREAD_NORMSAVE(2)(r10)
 	lwz	r12, THREAD_NORMSAVE(1)(r10)

arch/powerpc/kernel/ibmebus.c

@@ -125,17 +125,23 @@ static void ibmebus_unmap_sg(struct device *dev,
 
 static int ibmebus_dma_supported(struct device *dev, u64 mask)
 {
-	return 1;
+	return mask == DMA_BIT_MASK(64);
+}
+
+static u64 ibmebus_dma_get_required_mask(struct device *dev)
+{
+	return DMA_BIT_MASK(64);
 }
 
 static struct dma_map_ops ibmebus_dma_ops = {
-	.alloc_coherent = ibmebus_alloc_coherent,
-	.free_coherent  = ibmebus_free_coherent,
-	.map_sg         = ibmebus_map_sg,
-	.unmap_sg       = ibmebus_unmap_sg,
-	.dma_supported  = ibmebus_dma_supported,
-	.map_page       = ibmebus_map_page,
-	.unmap_page     = ibmebus_unmap_page,
+	.alloc_coherent     = ibmebus_alloc_coherent,
+	.free_coherent      = ibmebus_free_coherent,
+	.map_sg             = ibmebus_map_sg,
+	.unmap_sg           = ibmebus_unmap_sg,
+	.dma_supported      = ibmebus_dma_supported,
+	.get_required_mask  = ibmebus_dma_get_required_mask,
+	.map_page           = ibmebus_map_page,
+	.unmap_page         = ibmebus_unmap_page,
 };
 
 static int ibmebus_match_path(struct device *dev, void *data)

arch/powerpc/kernel/idle_e500.S

@@ -26,7 +26,7 @@ _GLOBAL(e500_idle)
 	ori	r4,r4,_TLF_NAPPING	/* so when we take an exception */
 	stw	r4,TI_LOCAL_FLAGS(r3)	/* it will return to our caller */
 
-#ifdef CONFIG_E500MC
+#ifdef CONFIG_PPC_E500MC
 	wrteei	1
 1:	wait
 

arch/powerpc/kernel/iommu.c

@@ -501,6 +501,14 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
 	tbl->it_map = page_address(page);
 	memset(tbl->it_map, 0, sz);
 
+	/*
+	 * Reserve page 0 so it will not be used for any mappings.
+	 * This avoids buggy drivers that consider page 0 to be invalid
+	 * to crash the machine or even lose data.
+	 */
+	if (tbl->it_offset == 0)
+		set_bit(0, tbl->it_map);
+
 	tbl->it_hint = 0;
 	tbl->it_largehint = tbl->it_halfpoint;
 	spin_lock_init(&tbl->it_lock);

arch/powerpc/kernel/legacy_serial.c

@@ -6,6 +6,7 @@
 #include <linux/pci.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/serial_reg.h>
 #include <asm/io.h>
 #include <asm/mmu.h>
 #include <asm/prom.h>
@@ -47,6 +48,24 @@ static struct __initdata of_device_id legacy_serial_parents[] = {
 static unsigned int legacy_serial_count;
 static int legacy_serial_console = -1;
 
+static unsigned int tsi_serial_in(struct uart_port *p, int offset)
+{
+	unsigned int tmp;
+	offset = offset << p->regshift;
+	if (offset == UART_IIR) {
+		tmp = readl(p->membase + (UART_IIR & ~3));
+		return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
+	} else
+		return readb(p->membase + offset);
+}
+
+static void tsi_serial_out(struct uart_port *p, int offset, int value)
+{
+	offset = offset << p->regshift;
+	if (!((offset == UART_IER) && (value & UART_IER_UUE)))
+		writeb(value, p->membase + offset);
+}
+
 static int __init add_legacy_port(struct device_node *np, int want_index,
 				  int iotype, phys_addr_t base,
 				  phys_addr_t taddr, unsigned long irq,
@@ -102,6 +121,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
 		legacy_serial_ports[index].iobase = base;
 	else
 		legacy_serial_ports[index].mapbase = base;
+
 	legacy_serial_ports[index].iotype = iotype;
 	legacy_serial_ports[index].uartclk = clock;
 	legacy_serial_ports[index].irq = irq;
@@ -112,6 +132,11 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
 	legacy_serial_infos[index].speed = spd ? be32_to_cpup(spd) : 0;
 	legacy_serial_infos[index].irq_check_parent = irq_check_parent;
 
+	if (iotype == UPIO_TSI) {
+		legacy_serial_ports[index].serial_in = tsi_serial_in;
+		legacy_serial_ports[index].serial_out = tsi_serial_out;
+	}
+
 	printk(KERN_DEBUG "Found legacy serial port %d for %s\n",
 	       index, np->full_name);
 	printk(KERN_DEBUG "  %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",

arch/powerpc/kernel/machine_kexec_64.c

@@ -74,8 +74,7 @@ int default_machine_kexec_prepare(struct kimage *image)
 	}
 
 	/* We also should not overwrite the tce tables */
-	for (node = of_find_node_by_type(NULL, "pci"); node != NULL;
-			node = of_find_node_by_type(node, "pci")) {
+	for_each_node_by_type(node, "pci") {
 		basep = of_get_property(node, "linux,tce-base", NULL);
 		sizep = of_get_property(node, "linux,tce-size", NULL);
 		if (basep == NULL || sizep == NULL)

arch/powerpc/kernel/misc_32.S

@@ -8,6 +8,8 @@
  * kexec bits:
  * Copyright (C) 2002-2003 Eric Biederman  <ebiederm@xmission.com>
  * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
+ * PPC44x port. Copyright (C) 2011,  IBM Corporation
+ * 		Author: Suzuki Poulose <suzuki@in.ibm.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -735,6 +737,175 @@ relocate_new_kernel:
 	mr      r4, r30
 	mr      r5, r31
 
+	li	r0, 0
+#elif defined(CONFIG_44x)  && !defined(CONFIG_47x)
+
+/*
+ * Code for setting up 1:1 mapping for PPC440x for KEXEC
+ *
+ * We cannot switch off the MMU on PPC44x.
+ * So we:
+ * 1) Invalidate all the mappings except the one we are running from.
+ * 2) Create a tmp mapping for our code in the other address space(TS) and
+ *    jump to it. Invalidate the entry we started in.
+ * 3) Create a 1:1 mapping for 0-2GiB in chunks of 256M in original TS.
+ * 4) Jump to the 1:1 mapping in original TS.
+ * 5) Invalidate the tmp mapping.
+ *
+ * - Based on the kexec support code for FSL BookE
+ * - Doesn't support 47x yet.
+ *
+ */
+	/* Save our parameters */
+	mr	r29, r3
+	mr	r30, r4
+	mr	r31, r5
+
+	/* Load our MSR_IS and TID to MMUCR for TLB search */
+	mfspr	r3,SPRN_PID
+	mfmsr	r4
+	andi.	r4,r4,MSR_IS@l
+	beq	wmmucr
+	oris	r3,r3,PPC44x_MMUCR_STS@h
+wmmucr:
+	mtspr	SPRN_MMUCR,r3
+	sync
+
+	/*
+	 * Invalidate all the TLB entries except the current entry
+	 * where we are running from
+	 */
+	bl	0f				/* Find our address */
+0:	mflr	r5				/* Make it accessible */
+	tlbsx	r23,0,r5			/* Find entry we are in */
+	li	r4,0				/* Start at TLB entry 0 */
+	li	r3,0				/* Set PAGEID inval value */
+1:	cmpw	r23,r4				/* Is this our entry? */
+	beq	skip				/* If so, skip the inval */
+	tlbwe	r3,r4,PPC44x_TLB_PAGEID		/* If not, inval the entry */
+skip:
+	addi	r4,r4,1				/* Increment */
+	cmpwi	r4,64				/* Are we done?	*/
+	bne	1b				/* If not, repeat */
+	isync
+
+	/* Create a temp mapping and jump to it */
+	andi.	r6, r23, 1		/* Find the index to use */
+	addi	r24, r6, 1		/* r24 will contain 1 or 2 */
+
+	mfmsr	r9			/* get the MSR */
+	rlwinm	r5, r9, 27, 31, 31	/* Extract the MSR[IS] */
+	xori	r7, r5, 1		/* Use the other address space */
+
+	/* Read the current mapping entries */
+	tlbre	r3, r23, PPC44x_TLB_PAGEID
+	tlbre	r4, r23, PPC44x_TLB_XLAT
+	tlbre	r5, r23, PPC44x_TLB_ATTRIB
+
+	/* Save our current XLAT entry */
+	mr	r25, r4
+
+	/* Extract the TLB PageSize */
+	li	r10, 1 			/* r10 will hold PageSize */
+	rlwinm	r11, r3, 0, 24, 27	/* bits 24-27 */
+
+	/* XXX: As of now we use 256M, 4K pages */
+	cmpwi	r11, PPC44x_TLB_256M
+	bne	tlb_4k
+	rotlwi	r10, r10, 28		/* r10 = 256M */
+	b	write_out
+tlb_4k:
+	cmpwi	r11, PPC44x_TLB_4K
+	bne	default
+	rotlwi	r10, r10, 12		/* r10 = 4K */
+	b	write_out
+default:
+	rotlwi	r10, r10, 10		/* r10 = 1K */
+
+write_out:
+	/*
+	 * Write out the tmp 1:1 mapping for this code in other address space
+	 * Fixup  EPN = RPN , TS=other address space
+	 */
+	insrwi	r3, r7, 1, 23		/* Bit 23 is TS for PAGEID field */
+
+	/* Write out the tmp mapping entries */
+	tlbwe	r3, r24, PPC44x_TLB_PAGEID
+	tlbwe	r4, r24, PPC44x_TLB_XLAT
+	tlbwe	r5, r24, PPC44x_TLB_ATTRIB
+
+	subi	r11, r10, 1		/* PageOffset Mask = PageSize - 1 */
+	not	r10, r11		/* Mask for PageNum */
+
+	/* Switch to other address space in MSR */
+	insrwi	r9, r7, 1, 26		/* Set MSR[IS] = r7 */
+
+	bl	1f
+1:	mflr	r8
+	addi	r8, r8, (2f-1b)		/* Find the target offset */
+
+	/* Jump to the tmp mapping */
+	mtspr	SPRN_SRR0, r8
+	mtspr	SPRN_SRR1, r9
+	rfi
+
+2:
+	/* Invalidate the entry we were executing from */
+	li	r3, 0
+	tlbwe	r3, r23, PPC44x_TLB_PAGEID
+
+	/* attribute fields. rwx for SUPERVISOR mode */
+	li	r5, 0
+	ori	r5, r5, (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
+
+	/* Create 1:1 mapping in 256M pages */
+	xori	r7, r7, 1			/* Revert back to Original TS */
+
+	li	r8, 0				/* PageNumber */
+	li	r6, 3				/* TLB Index, start at 3  */
+
+next_tlb:
+	rotlwi	r3, r8, 28			/* Create EPN (bits 0-3) */
+	mr	r4, r3				/* RPN = EPN  */
+	ori	r3, r3, (PPC44x_TLB_VALID | PPC44x_TLB_256M) /* SIZE = 256M, Valid */
+	insrwi	r3, r7, 1, 23			/* Set TS from r7 */
+
+	tlbwe	r3, r6, PPC44x_TLB_PAGEID	/* PageID field : EPN, V, SIZE */
+	tlbwe	r4, r6, PPC44x_TLB_XLAT		/* Address translation : RPN   */
+	tlbwe	r5, r6, PPC44x_TLB_ATTRIB	/* Attributes */
+
+	addi	r8, r8, 1			/* Increment PN */
+	addi	r6, r6, 1			/* Increment TLB Index */
+	cmpwi	r8, 8				/* Are we done ? */
+	bne	next_tlb
+	isync
+
+	/* Jump to the new mapping 1:1 */
+	li	r9,0
+	insrwi	r9, r7, 1, 26			/* Set MSR[IS] = r7 */
+
+	bl	1f
+1:	mflr	r8
+	and	r8, r8, r11			/* Get our offset within page */
+	addi	r8, r8, (2f-1b)
+
+	and	r5, r25, r10			/* Get our target PageNum */
+	or	r8, r8, r5			/* Target jump address */
+
+	mtspr	SPRN_SRR0, r8
+	mtspr	SPRN_SRR1, r9
+	rfi
+2:
+	/* Invalidate the tmp entry we used */
+	li	r3, 0
+	tlbwe	r3, r24, PPC44x_TLB_PAGEID
+	sync
+
+	/* Restore the parameters */
+	mr	r3, r29
+	mr	r4, r30
+	mr	r5, r31
+
 	li	r0, 0
 #else
 	li	r0, 0

arch/powerpc/kernel/pci-common.c

@@ -1730,6 +1730,17 @@ void __devinit pcibios_scan_phb(struct pci_controller *hose)
 
 	if (mode == PCI_PROBE_NORMAL)
 		hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
+
+	/* Configure PCI Express settings */
+	if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
+		struct pci_bus *child;
+		list_for_each_entry(child, &bus->children, node) {
+			struct pci_dev *self = child->self;
+			if (!self)
+				continue;
+			pcie_bus_configure_settings(child, self->pcie_mpss);
+		}
+	}
 }
 
 static void fixup_hide_host_resource_fsl(struct pci_dev *dev)

arch/powerpc/kernel/power6-pmu.c

@@ -487,8 +487,8 @@ static int power6_generic_events[] = {
  */
 static int power6_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
-		[C(OP_READ)] = {	0x80082,	0x80080		},
-		[C(OP_WRITE)] = {	0x80086,	0x80088		},
+		[C(OP_READ)] = {	0x280030,	0x80080		},
+		[C(OP_WRITE)] = {	0x180032,	0x80088		},
 		[C(OP_PREFETCH)] = {	0x810a4,	0		},
 	},
 	[C(L1I)] = {		/* 	RESULT_ACCESS	RESULT_MISS */

arch/powerpc/kernel/power7-pmu.c

@@ -297,6 +297,8 @@ static void power7_disable_pmc(unsigned int pmc, unsigned long mmcr[])
 
 static int power7_generic_events[] = {
 	[PERF_COUNT_HW_CPU_CYCLES] = 0x1e,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x100f8, /* GCT_NOSLOT_CYC */
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x4000a,  /* CMPLU_STALL */
 	[PERF_COUNT_HW_INSTRUCTIONS] = 2,
 	[PERF_COUNT_HW_CACHE_REFERENCES] = 0xc880,	/* LD_REF_L1_LSU*/
 	[PERF_COUNT_HW_CACHE_MISSES] = 0x400f0,		/* LD_MISS_L1	*/

arch/powerpc/kernel/prom.c

@@ -54,6 +54,8 @@
 #include <asm/pci-bridge.h>
 #include <asm/phyp_dump.h>
 #include <asm/kexec.h>
+#include <asm/opal.h>
+
 #include <mm/mmu_decl.h>
 
 #ifdef DEBUG
@@ -707,11 +709,23 @@ void __init early_init_devtree(void *params)
 	of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
 #endif
 
+#ifdef CONFIG_PPC_POWERNV
+	/* Some machines might need OPAL info for debugging, grab it now. */
+	of_scan_flat_dt(early_init_dt_scan_opal, NULL);
+#endif
+
 #ifdef CONFIG_PHYP_DUMP
 	/* scan tree to see if dump occurred during last boot */
 	of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
 #endif
 
+	/* Pre-initialize the cmd_line with the content of boot_commmand_line,
+	 * which will be empty except when the content of the variable has
+	 * been overriden by a bootloading mechanism. This happens typically
+	 * with HAL takeover
+	 */
+	strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
+
 	/* Retrieve various informations from the /chosen node of the
 	 * device-tree, including the platform type, initrd location and
 	 * size, TCE reserve, and more ...
@@ -723,12 +737,15 @@ void __init early_init_devtree(void *params)
 
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
 	of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
-	setup_initial_memory_limit(memstart_addr, first_memblock_size);
 
 	/* Save command line for /proc/cmdline and then parse parameters */
 	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 
+	/* make sure we've parsed cmdline for mem= before this */
+	if (memory_limit)
+		first_memblock_size = min(first_memblock_size, memory_limit);
+	setup_initial_memory_limit(memstart_addr, first_memblock_size);
 	/* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
 	memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
 	/* If relocatable, reserve first 32k for interrupt vectors etc. */

arch/powerpc/kernel/prom_init.c

@@ -43,6 +43,7 @@
 #include <asm/btext.h>
 #include <asm/sections.h>
 #include <asm/machdep.h>
+#include <asm/opal.h>
 
 #include <linux/linux_logo.h>
 
@@ -139,7 +140,9 @@ struct mem_map_entry {
 
 typedef u32 cell_t;
 
-extern void __start(unsigned long r3, unsigned long r4, unsigned long r5);
+extern void __start(unsigned long r3, unsigned long r4, unsigned long r5,
+		    unsigned long r6, unsigned long r7, unsigned long r8,
+		    unsigned long r9);
 
 #ifdef CONFIG_PPC64
 extern int enter_prom(struct prom_args *args, unsigned long entry);
@@ -185,6 +188,7 @@ static unsigned long __initdata prom_tce_alloc_end;
 #define PLATFORM_LPAR		0x0001
 #define PLATFORM_POWERMAC	0x0400
 #define PLATFORM_GENERIC	0x0500
+#define PLATFORM_OPAL		0x0600
 
 static int __initdata of_platform;
 
@@ -644,7 +648,7 @@ static void __init early_cmdline_parse(void)
 	}
 }
 
-#ifdef CONFIG_PPC_PSERIES
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
 /*
  * There are two methods for telling firmware what our capabilities are.
  * Newer machines have an "ibm,client-architecture-support" method on the
@@ -1274,6 +1278,284 @@ static void __init prom_init_mem(void)
 	prom_printf("  ram_top      : %x\n", RELOC(ram_top));
 }
 
+static void __init prom_close_stdin(void)
+{
+	struct prom_t *_prom = &RELOC(prom);
+	ihandle val;
+
+	if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0)
+		call_prom("close", 1, 0, val);
+}
+
+#ifdef CONFIG_PPC_POWERNV
+
+static u64 __initdata prom_opal_size;
+static u64 __initdata prom_opal_align;
+static int __initdata prom_rtas_start_cpu;
+static u64 __initdata prom_rtas_data;
+static u64 __initdata prom_rtas_entry;
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
+static u64 __initdata prom_opal_base;
+static u64 __initdata prom_opal_entry;
+#endif
+
+/* XXX Don't change this structure without updating opal-takeover.S */
+static struct opal_secondary_data {
+	s64				ack;	/*  0 */
+	u64				go;	/*  8 */
+	struct opal_takeover_args	args;	/* 16 */
+} opal_secondary_data;
+
+extern char opal_secondary_entry;
+
+static void prom_query_opal(void)
+{
+	long rc;
+
+	/* We must not query for OPAL presence on a machine that
+	 * supports TNK takeover (970 blades), as this uses the same
+	 * h-call with different arguments and will crash
+	 */
+	if (PHANDLE_VALID(call_prom("finddevice", 1, 1,
+				    ADDR("/tnk-memory-map")))) {
+		prom_printf("TNK takeover detected, skipping OPAL check\n");
+		return;
+	}
+
+	prom_printf("Querying for OPAL presence... ");
+	rc = opal_query_takeover(&RELOC(prom_opal_size),
+				 &RELOC(prom_opal_align));
+	prom_debug("(rc = %ld) ", rc);
+	if (rc != 0) {
+		prom_printf("not there.\n");
+		return;
+	}
+	RELOC(of_platform) = PLATFORM_OPAL;
+	prom_printf(" there !\n");
+	prom_debug("  opal_size  = 0x%lx\n", RELOC(prom_opal_size));
+	prom_debug("  opal_align = 0x%lx\n", RELOC(prom_opal_align));
+	if (RELOC(prom_opal_align) < 0x10000)
+		RELOC(prom_opal_align) = 0x10000;
+}
+
+static int prom_rtas_call(int token, int nargs, int nret, int *outputs, ...)
+{
+	struct rtas_args rtas_args;
+	va_list list;
+	int i;
+
+	rtas_args.token = token;
+	rtas_args.nargs = nargs;
+	rtas_args.nret  = nret;
+	rtas_args.rets  = (rtas_arg_t *)&(rtas_args.args[nargs]);
+	va_start(list, outputs);
+	for (i = 0; i < nargs; ++i)
+		rtas_args.args[i] = va_arg(list, rtas_arg_t);
+	va_end(list);
+
+	for (i = 0; i < nret; ++i)
+		rtas_args.rets[i] = 0;
+
+	opal_enter_rtas(&rtas_args, RELOC(prom_rtas_data),
+			RELOC(prom_rtas_entry));
+
+	if (nret > 1 && outputs != NULL)
+		for (i = 0; i < nret-1; ++i)
+			outputs[i] = rtas_args.rets[i+1];
+	return (nret > 0)? rtas_args.rets[0]: 0;
+}
+
+static void __init prom_opal_hold_cpus(void)
+{
+	int i, cnt, cpu, rc;
+	long j;
+	phandle node;
+	char type[64];
+	u32 servers[8];
+	struct prom_t *_prom = &RELOC(prom);
+	void *entry = (unsigned long *)&RELOC(opal_secondary_entry);
+	struct opal_secondary_data *data = &RELOC(opal_secondary_data);
+
+	prom_debug("prom_opal_hold_cpus: start...\n");
+	prom_debug("    - entry       = 0x%x\n", entry);
+	prom_debug("    - data        = 0x%x\n", data);
+
+	data->ack = -1;
+	data->go = 0;
+
+	/* look for cpus */
+	for (node = 0; prom_next_node(&node); ) {
+		type[0] = 0;
+		prom_getprop(node, "device_type", type, sizeof(type));
+		if (strcmp(type, RELOC("cpu")) != 0)
+			continue;
+
+		/* Skip non-configured cpus. */
+		if (prom_getprop(node, "status", type, sizeof(type)) > 0)
+			if (strcmp(type, RELOC("okay")) != 0)
+				continue;
+
+		cnt = prom_getprop(node, "ibm,ppc-interrupt-server#s", servers,
+			     sizeof(servers));
+		if (cnt == PROM_ERROR)
+			break;
+		cnt >>= 2;
+		for (i = 0; i < cnt; i++) {
+			cpu = servers[i];
+			prom_debug("CPU %d ... ", cpu);
+			if (cpu == _prom->cpu) {
+				prom_debug("booted !\n");
+				continue;
+			}
+			prom_debug("starting ... ");
+
+			/* Init the acknowledge var which will be reset by
+			 * the secondary cpu when it awakens from its OF
+			 * spinloop.
+			 */
+			data->ack = -1;
+			rc = prom_rtas_call(RELOC(prom_rtas_start_cpu), 3, 1,
+					    NULL, cpu, entry, data);
+			prom_debug("rtas rc=%d ...", rc);
+
+			for (j = 0; j < 100000000 && data->ack == -1; j++) {
+				HMT_low();
+				mb();
+			}
+			HMT_medium();
+			if (data->ack != -1)
+				prom_debug("done, PIR=0x%x\n", data->ack);
+			else
+				prom_debug("timeout !\n");
+		}
+	}
+	prom_debug("prom_opal_hold_cpus: end...\n");
+}
+
+static void prom_opal_takeover(void)
+{
+	struct opal_secondary_data *data = &RELOC(opal_secondary_data);
+	struct opal_takeover_args *args = &data->args;
+	u64 align = RELOC(prom_opal_align);
+	u64 top_addr, opal_addr;
+
+	args->k_image	= (u64)RELOC(_stext);
+	args->k_size	= _end - _stext;
+	args->k_entry	= 0;
+	args->k_entry2	= 0x60;
+
+	top_addr = _ALIGN_UP(args->k_size, align);
+
+	if (RELOC(prom_initrd_start) != 0) {
+		args->rd_image = RELOC(prom_initrd_start);
+		args->rd_size = RELOC(prom_initrd_end) - args->rd_image;
+		args->rd_loc = top_addr;
+		top_addr = _ALIGN_UP(args->rd_loc + args->rd_size, align);
+	}
+
+	/* Pickup an address for the HAL. We want to go really high
+	 * up to avoid problem with future kexecs. On the other hand
+	 * we don't want to be all over the TCEs on P5IOC2 machines
+	 * which are going to be up there too. We assume the machine
+	 * has plenty of memory, and we ask for the HAL for now to
+	 * be just below the 1G point, or above the initrd
+	 */
+	opal_addr = _ALIGN_DOWN(0x40000000 - RELOC(prom_opal_size), align);
+	if (opal_addr < top_addr)
+		opal_addr = top_addr;
+	args->hal_addr = opal_addr;
+
+	/* Copy the command line to the kernel image */
+	strlcpy(RELOC(boot_command_line), RELOC(prom_cmd_line),
+		COMMAND_LINE_SIZE);
+
+	prom_debug("  k_image    = 0x%lx\n", args->k_image);
+	prom_debug("  k_size     = 0x%lx\n", args->k_size);
+	prom_debug("  k_entry    = 0x%lx\n", args->k_entry);
+	prom_debug("  k_entry2   = 0x%lx\n", args->k_entry2);
+	prom_debug("  hal_addr   = 0x%lx\n", args->hal_addr);
+	prom_debug("  rd_image   = 0x%lx\n", args->rd_image);
+	prom_debug("  rd_size    = 0x%lx\n", args->rd_size);
+	prom_debug("  rd_loc     = 0x%lx\n", args->rd_loc);
+	prom_printf("Performing OPAL takeover,this can take a few minutes..\n");
+	prom_close_stdin();
+	mb();
+	data->go = 1;
+	for (;;)
+		opal_do_takeover(args);
+}
+
+/*
+ * Allocate room for and instantiate OPAL
+ */
+static void __init prom_instantiate_opal(void)
+{
+	phandle opal_node;
+	ihandle opal_inst;
+	u64 base, entry;
+	u64 size = 0, align = 0x10000;
+	u32 rets[2];
+
+	prom_debug("prom_instantiate_opal: start...\n");
+
+	opal_node = call_prom("finddevice", 1, 1, ADDR("/ibm,opal"));
+	prom_debug("opal_node: %x\n", opal_node);
+	if (!PHANDLE_VALID(opal_node))
+		return;
+
+	prom_getprop(opal_node, "opal-runtime-size", &size, sizeof(size));
+	if (size == 0)
+		return;
+	prom_getprop(opal_node, "opal-runtime-alignment", &align,
+		     sizeof(align));
+
+	base = alloc_down(size, align, 0);
+	if (base == 0) {
+		prom_printf("OPAL allocation failed !\n");
+		return;
+	}
+
+	opal_inst = call_prom("open", 1, 1, ADDR("/ibm,opal"));
+	if (!IHANDLE_VALID(opal_inst)) {
+		prom_printf("opening opal package failed (%x)\n", opal_inst);
+		return;
+	}
+
+	prom_printf("instantiating opal at 0x%x...", base);
+
+	if (call_prom_ret("call-method", 4, 3, rets,
+			  ADDR("load-opal-runtime"),
+			  opal_inst,
+			  base >> 32, base & 0xffffffff) != 0
+	    || (rets[0] == 0 && rets[1] == 0)) {
+		prom_printf(" failed\n");
+		return;
+	}
+	entry = (((u64)rets[0]) << 32) | rets[1];
+
+	prom_printf(" done\n");
+
+	reserve_mem(base, size);
+
+	prom_debug("opal base     = 0x%x\n", base);
+	prom_debug("opal align    = 0x%x\n", align);
+	prom_debug("opal entry    = 0x%x\n", entry);
+	prom_debug("opal size     = 0x%x\n", (long)size);
+
+	prom_setprop(opal_node, "/ibm,opal", "opal-base-address",
+		     &base, sizeof(base));
+	prom_setprop(opal_node, "/ibm,opal", "opal-entry-address",
+		     &entry, sizeof(entry));
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
+	RELOC(prom_opal_base) = base;
+	RELOC(prom_opal_entry) = entry;
+#endif
+	prom_debug("prom_instantiate_opal: end...\n");
+}
+
+#endif /* CONFIG_PPC_POWERNV */
 
 /*
  * Allocate room for and instantiate RTAS
@@ -1326,6 +1608,12 @@ static void __init prom_instantiate_rtas(void)
 	prom_setprop(rtas_node, "/rtas", "linux,rtas-entry",
 		     &entry, sizeof(entry));
 
+#ifdef CONFIG_PPC_POWERNV
+	/* PowerVN takeover hack */
+	RELOC(prom_rtas_data) = base;
+	RELOC(prom_rtas_entry) = entry;
+	prom_getprop(rtas_node, "start-cpu", &RELOC(prom_rtas_start_cpu), 4);
+#endif
 	prom_debug("rtas base     = 0x%x\n", base);
 	prom_debug("rtas entry    = 0x%x\n", entry);
 	prom_debug("rtas size     = 0x%x\n", (long)size);
@@ -1543,7 +1831,7 @@ static void __init prom_hold_cpus(void)
 		*acknowledge = (unsigned long)-1;
 
 		if (reg != _prom->cpu) {
-			/* Primary Thread of non-boot cpu */
+			/* Primary Thread of non-boot cpu or any thread */
 			prom_printf("starting cpu hw idx %lu... ", reg);
 			call_prom("start-cpu", 3, 0, node,
 				  secondary_hold, reg);
@@ -1652,15 +1940,6 @@ static void __init prom_init_stdout(void)
 		prom_setprop(val, path, "linux,boot-display", NULL, 0);
 }
 
-static void __init prom_close_stdin(void)
-{
-	struct prom_t *_prom = &RELOC(prom);
-	ihandle val;
-
-	if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0)
-		call_prom("close", 1, 0, val);
-}
-
 static int __init prom_find_machine_type(void)
 {
 	struct prom_t *_prom = &RELOC(prom);
@@ -1671,7 +1950,7 @@ static int __init prom_find_machine_type(void)
 	int x;
 #endif
 
-	/* Look for a PowerMac */
+	/* Look for a PowerMac or a Cell */
 	len = prom_getprop(_prom->root, "compatible",
 			   compat, sizeof(compat)-1);
 	if (len > 0) {
@@ -1697,7 +1976,11 @@ static int __init prom_find_machine_type(void)
 		}
 	}
 #ifdef CONFIG_PPC64
-	/* If not a mac, try to figure out if it's an IBM pSeries or any other
+	/* Try to detect OPAL */
+	if (PHANDLE_VALID(call_prom("finddevice", 1, 1, ADDR("/ibm,opal"))))
+		return PLATFORM_OPAL;
+
+	/* Try to figure out if it's an IBM pSeries or any other
 	 * PAPR compliant platform. We assume it is if :
 	 *  - /device_type is "chrp" (please, do NOT use that for future
 	 *    non-IBM designs !
@@ -1924,7 +2207,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
 	unsigned long soff;
 	unsigned char *valp;
 	static char pname[MAX_PROPERTY_NAME];
-	int l, room;
+	int l, room, has_phandle = 0;
 
 	dt_push_token(OF_DT_BEGIN_NODE, mem_start, mem_end);
 
@@ -2008,19 +2291,26 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
 		valp = make_room(mem_start, mem_end, l, 4);
 		call_prom("getprop", 4, 1, node, RELOC(pname), valp, l);
 		*mem_start = _ALIGN(*mem_start, 4);
+
+		if (!strcmp(RELOC(pname), RELOC("phandle")))
+			has_phandle = 1;
 	}
 
-	/* Add a "linux,phandle" property. */
-	soff = dt_find_string(RELOC("linux,phandle"));
-	if (soff == 0)
-		prom_printf("WARNING: Can't find string index for"
-			    " <linux-phandle> node %s\n", path);
-	else {
-		dt_push_token(OF_DT_PROP, mem_start, mem_end);
-		dt_push_token(4, mem_start, mem_end);
-		dt_push_token(soff, mem_start, mem_end);
-		valp = make_room(mem_start, mem_end, 4, 4);
-		*(u32 *)valp = node;
+	/* Add a "linux,phandle" property if no "phandle" property already
+	 * existed (can happen with OPAL)
+	 */
+	if (!has_phandle) {
+		soff = dt_find_string(RELOC("linux,phandle"));
+		if (soff == 0)
+			prom_printf("WARNING: Can't find string index for"
+				    " <linux-phandle> node %s\n", path);
+		else {
+			dt_push_token(OF_DT_PROP, mem_start, mem_end);
+			dt_push_token(4, mem_start, mem_end);
+			dt_push_token(soff, mem_start, mem_end);
+			valp = make_room(mem_start, mem_end, 4, 4);
+			*(u32 *)valp = node;
+		}
 	}
 
 	/* do all our children */
@@ -2504,6 +2794,7 @@ static void __init prom_check_initrd(unsigned long r3, unsigned long r4)
 #endif /* CONFIG_BLK_DEV_INITRD */
 }
 
+
 /*
  * We enter here early on, when the Open Firmware prom is still
  * handling exceptions and the MMU hash table for us.
@@ -2553,6 +2844,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	 * between pSeries SMP and pSeries LPAR
 	 */
 	RELOC(of_platform) = prom_find_machine_type();
+	prom_printf("Detected machine type: %x\n", RELOC(of_platform));
 
 #ifndef CONFIG_RELOCATABLE
 	/* Bail if this is a kdump kernel. */
@@ -2565,7 +2857,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	 */
 	prom_check_initrd(r3, r4);
 
-#ifdef CONFIG_PPC_PSERIES
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
 	/*
 	 * On pSeries, inform the firmware about our capabilities
 	 */
@@ -2611,14 +2903,33 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 #endif
 
 	/*
-	 * On non-powermacs, try to instantiate RTAS and puts all CPUs
-	 * in spin-loops. PowerMacs don't have a working RTAS and use
-	 * a different way to spin CPUs
+	 * On non-powermacs, try to instantiate RTAS. PowerMacs don't
+	 * have a usable RTAS implementation.
 	 */
-	if (RELOC(of_platform) != PLATFORM_POWERMAC) {
+	if (RELOC(of_platform) != PLATFORM_POWERMAC &&
+	    RELOC(of_platform) != PLATFORM_OPAL)
 		prom_instantiate_rtas();
+
+#ifdef CONFIG_PPC_POWERNV
+	/* Detect HAL and try instanciating it & doing takeover */
+	if (RELOC(of_platform) == PLATFORM_PSERIES_LPAR) {
+		prom_query_opal();
+		if (RELOC(of_platform) == PLATFORM_OPAL) {
+			prom_opal_hold_cpus();
+			prom_opal_takeover();
+		}
+	} else if (RELOC(of_platform) == PLATFORM_OPAL)
+		prom_instantiate_opal();
+#endif
+
+	/*
+	 * On non-powermacs, put all CPUs in spin-loops.
+	 *
+	 * PowerMacs use a different mechanism to spin CPUs
+	 */
+	if (RELOC(of_platform) != PLATFORM_POWERMAC &&
+	    RELOC(of_platform) != PLATFORM_OPAL)
 		prom_hold_cpus();
-	}
 
 	/*
 	 * Fill in some infos for use by the kernel later on
@@ -2685,7 +2996,13 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	reloc_got2(-offset);
 #endif
 
-	__start(hdr, kbase, 0);
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
+	/* OPAL early debug gets the OPAL base & entry in r8 and r9 */
+	__start(hdr, kbase, 0, 0, 0,
+		RELOC(prom_opal_base), RELOC(prom_opal_entry));
+#else
+	__start(hdr, kbase, 0, 0, 0, 0, 0);
+#endif
 
 	return 0;
 }

arch/powerpc/kernel/prom_init_check.sh

@@ -20,7 +20,9 @@ WHITELIST="add_reloc_offset __bss_start __bss_stop copy_and_flush
 _end enter_prom memcpy memset reloc_offset __secondary_hold
 __secondary_hold_acknowledge __secondary_hold_spinloop __start
 strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
-reloc_got2 kernstart_addr memstart_addr linux_banner"
+reloc_got2 kernstart_addr memstart_addr linux_banner _stext
+opal_query_takeover opal_do_takeover opal_enter_rtas opal_secondary_entry
+boot_command_line"
 
 NM="$1"
 OBJ="$2"

arch/powerpc/kernel/ptrace.c

@@ -1497,9 +1497,14 @@ long arch_ptrace(struct task_struct *child, long request,
 		if (index < PT_FPR0) {
 			tmp = ptrace_get_reg(child, (int) index);
 		} else {
+			unsigned int fpidx = index - PT_FPR0;
+
 			flush_fp_to_thread(child);
-			tmp = ((unsigned long *)child->thread.fpr)
-				[TS_FPRWIDTH * (index - PT_FPR0)];
+			if (fpidx < (PT_FPSCR - PT_FPR0))
+				tmp = ((unsigned long *)child->thread.fpr)
+					[fpidx * TS_FPRWIDTH];
+			else
+				tmp = child->thread.fpscr.val;
 		}
 		ret = put_user(tmp, datalp);
 		break;
@@ -1525,9 +1530,14 @@ long arch_ptrace(struct task_struct *child, long request,
 		if (index < PT_FPR0) {
 			ret = ptrace_put_reg(child, index, data);
 		} else {
+			unsigned int fpidx = index - PT_FPR0;
+
 			flush_fp_to_thread(child);
-			((unsigned long *)child->thread.fpr)
-				[TS_FPRWIDTH * (index - PT_FPR0)] = data;
+			if (fpidx < (PT_FPSCR - PT_FPR0))
+				((unsigned long *)child->thread.fpr)
+					[fpidx * TS_FPRWIDTH] = data;
+			else
+				child->thread.fpscr.val = data;
 			ret = 0;
 		}
 		break;

arch/powerpc/kernel/setup_32.c

@@ -117,7 +117,7 @@ notrace unsigned long __init early_init(unsigned long dt_ptr)
  * This is called very early on the boot process, after a minimal
  * MMU environment has been set up but before MMU_init is called.
  */
-notrace void __init machine_init(unsigned long dt_ptr)
+notrace void __init machine_init(u64 dt_ptr)
 {
 	lockdep_init();
 

arch/powerpc/kernel/setup_64.c

@@ -278,14 +278,14 @@ static void __init initialize_cache_info(void)
 
 	DBG(" -> initialize_cache_info()\n");
 
-	for (np = NULL; (np = of_find_node_by_type(np, "cpu"));) {
+	for_each_node_by_type(np, "cpu") {
 		num_cpus += 1;
 
-		/* We're assuming *all* of the CPUs have the same
+		/*
+		 * We're assuming *all* of the CPUs have the same
 		 * d-cache and i-cache sizes... -Peter
 		 */
-
-		if ( num_cpus == 1 ) {
+		if (num_cpus == 1) {
 			const u32 *sizep, *lsizep;
 			u32 size, lsize;
 
@@ -294,10 +294,13 @@ static void __init initialize_cache_info(void)
 			sizep = of_get_property(np, "d-cache-size", NULL);
 			if (sizep != NULL)
 				size = *sizep;
-			lsizep = of_get_property(np, "d-cache-block-size", NULL);
+			lsizep = of_get_property(np, "d-cache-block-size",
+						 NULL);
 			/* fallback if block size missing */
 			if (lsizep == NULL)
-				lsizep = of_get_property(np, "d-cache-line-size", NULL);
+				lsizep = of_get_property(np,
+							 "d-cache-line-size",
+							 NULL);
 			if (lsizep != NULL)
 				lsize = *lsizep;
 			if (sizep == 0 || lsizep == 0)
@@ -314,9 +317,12 @@ static void __init initialize_cache_info(void)
 			sizep = of_get_property(np, "i-cache-size", NULL);
 			if (sizep != NULL)
 				size = *sizep;
-			lsizep = of_get_property(np, "i-cache-block-size", NULL);
+			lsizep = of_get_property(np, "i-cache-block-size",
+						 NULL);
 			if (lsizep == NULL)
-				lsizep = of_get_property(np, "i-cache-line-size", NULL);
+				lsizep = of_get_property(np,
+							 "i-cache-line-size",
+							 NULL);
 			if (lsizep != NULL)
 				lsize = *lsizep;
 			if (sizep == 0 || lsizep == 0)

arch/powerpc/kernel/smp.c

@@ -70,6 +70,10 @@
 static DEFINE_PER_CPU(struct task_struct *, idle_thread_array);
 #define get_idle_for_cpu(x)      (per_cpu(idle_thread_array, x))
 #define set_idle_for_cpu(x, p)   (per_cpu(idle_thread_array, x) = (p))
+
+/* State of each CPU during hotplug phases */
+static DEFINE_PER_CPU(int, cpu_state) = { 0 };
+
 #else
 static struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
 #define get_idle_for_cpu(x)      (idle_thread_array[(x)])
@@ -104,12 +108,25 @@ int __devinit smp_generic_kick_cpu(int nr)
 	 * cpu_start field to become non-zero After we set cpu_start,
 	 * the processor will continue on to secondary_start
 	 */
-	paca[nr].cpu_start = 1;
-	smp_mb();
+	if (!paca[nr].cpu_start) {
+		paca[nr].cpu_start = 1;
+		smp_mb();
+		return 0;
+	}
+
+#ifdef CONFIG_HOTPLUG_CPU
+	/*
+	 * Ok it's not there, so it might be soft-unplugged, let's
+	 * try to bring it back
+	 */
+	per_cpu(cpu_state, nr) = CPU_UP_PREPARE;
+	smp_wmb();
+	smp_send_reschedule(nr);
+#endif /* CONFIG_HOTPLUG_CPU */
 
 	return 0;
 }
-#endif
+#endif /* CONFIG_PPC64 */
 
 static irqreturn_t call_function_action(int irq, void *data)
 {
@@ -357,8 +374,6 @@ void __devinit smp_prepare_boot_cpu(void)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-/* State of each CPU during hotplug phases */
-static DEFINE_PER_CPU(int, cpu_state) = { 0 };
 
 int generic_cpu_disable(void)
 {
@@ -406,6 +421,11 @@ void generic_set_cpu_dead(unsigned int cpu)
 {
 	per_cpu(cpu_state, cpu) = CPU_DEAD;
 }
+
+int generic_check_cpu_restart(unsigned int cpu)
+{
+	return per_cpu(cpu_state, cpu) == CPU_UP_PREPARE;
+}
 #endif
 
 struct create_idle {

arch/powerpc/kernel/swsusp.c

@@ -33,6 +33,6 @@ void save_processor_state(void)
 void restore_processor_state(void)
 {
 #ifdef CONFIG_PPC32
-	switch_mmu_context(NULL, current->active_mm);
+	switch_mmu_context(current->active_mm, current->active_mm);
 #endif
 }

arch/powerpc/kernel/traps.c

@@ -457,7 +457,14 @@ int machine_check_e500mc(struct pt_regs *regs)
 
 	if (reason & MCSR_DCPERR_MC) {
 		printk("Data Cache Parity Error\n");
-		recoverable = 0;
+
+		/*
+		 * In write shadow mode we auto-recover from the error, but it
+		 * may still get logged and cause a machine check.  We should
+		 * only treat the non-write shadow case as non-recoverable.
+		 */
+		if (!(mfspr(SPRN_L1CSR2) & L1CSR2_DCWS))
+			recoverable = 0;
 	}
 
 	if (reason & MCSR_L2MMU_MHIT) {

arch/powerpc/kernel/udbg.c

@@ -69,6 +69,12 @@ void __init udbg_early_init(void)
 	udbg_init_wsp();
 #elif defined(CONFIG_PPC_EARLY_DEBUG_EHV_BC)
 	udbg_init_ehv_bc();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_PS3GELIC)
+	udbg_init_ps3gelic();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_OPAL_RAW)
+	udbg_init_debug_opal_raw();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_OPAL_HVSI)
+	udbg_init_debug_opal_hvsi();
 #endif
 
 #ifdef CONFIG_PPC_EARLY_DEBUG

arch/powerpc/kernel/vio.c

@@ -605,15 +605,20 @@ static int vio_dma_iommu_dma_supported(struct device *dev, u64 mask)
         return dma_iommu_ops.dma_supported(dev, mask);
 }
 
-struct dma_map_ops vio_dma_mapping_ops = {
-	.alloc_coherent = vio_dma_iommu_alloc_coherent,
-	.free_coherent  = vio_dma_iommu_free_coherent,
-	.map_sg         = vio_dma_iommu_map_sg,
-	.unmap_sg       = vio_dma_iommu_unmap_sg,
-	.map_page       = vio_dma_iommu_map_page,
-	.unmap_page     = vio_dma_iommu_unmap_page,
-	.dma_supported  = vio_dma_iommu_dma_supported,
+static u64 vio_dma_get_required_mask(struct device *dev)
+{
+        return dma_iommu_ops.get_required_mask(dev);
+}
 
+struct dma_map_ops vio_dma_mapping_ops = {
+	.alloc_coherent    = vio_dma_iommu_alloc_coherent,
+	.free_coherent     = vio_dma_iommu_free_coherent,
+	.map_sg            = vio_dma_iommu_map_sg,
+	.unmap_sg          = vio_dma_iommu_unmap_sg,
+	.map_page          = vio_dma_iommu_map_page,
+	.unmap_page        = vio_dma_iommu_unmap_page,
+	.dma_supported     = vio_dma_iommu_dma_supported,
+	.get_required_mask = vio_dma_get_required_mask,
 };
 
 /**

arch/powerpc/math-emu/math_efp.c

@@ -171,10 +171,6 @@ static unsigned long insn_type(unsigned long speinsn)
 	case EFDNABS:	ret = XA;	break;
 	case EFDNEG:	ret = XA;	break;
 	case EFDSUB:	ret = AB;	break;
-
-	default:
-		printk(KERN_ERR "\nOoops! SPE instruction no type found.");
-		printk(KERN_ERR "\ninst code: %08lx\n", speinsn);
 	}
 
 	return ret;
@@ -195,7 +191,7 @@ int do_spe_mathemu(struct pt_regs *regs)
 
 	type = insn_type(speinsn);
 	if (type == NOTYPE)
-		return -ENOSYS;
+		goto illegal;
 
 	func = speinsn & 0x7ff;
 	fc = (speinsn >> 21) & 0x1f;
@@ -212,12 +208,10 @@ int do_spe_mathemu(struct pt_regs *regs)
 
 	__FPU_FPSCR = mfspr(SPRN_SPEFSCR);
 
-#ifdef DEBUG
-	printk("speinsn:%08lx spefscr:%08lx\n", speinsn, __FPU_FPSCR);
-	printk("vc: %08x  %08x\n", vc.wp[0], vc.wp[1]);
-	printk("va: %08x  %08x\n", va.wp[0], va.wp[1]);
-	printk("vb: %08x  %08x\n", vb.wp[0], vb.wp[1]);
-#endif
+	pr_debug("speinsn:%08lx spefscr:%08lx\n", speinsn, __FPU_FPSCR);
+	pr_debug("vc: %08x  %08x\n", vc.wp[0], vc.wp[1]);
+	pr_debug("va: %08x  %08x\n", va.wp[0], va.wp[1]);
+	pr_debug("vb: %08x  %08x\n", vb.wp[0], vb.wp[1]);
 
 	switch (src) {
 	case SPFP: {
@@ -235,10 +229,8 @@ int do_spe_mathemu(struct pt_regs *regs)
 			break;
 		}
 
-#ifdef DEBUG
-		printk("SA: %ld %08lx %ld (%ld)\n", SA_s, SA_f, SA_e, SA_c);
-		printk("SB: %ld %08lx %ld (%ld)\n", SB_s, SB_f, SB_e, SB_c);
-#endif
+		pr_debug("SA: %ld %08lx %ld (%ld)\n", SA_s, SA_f, SA_e, SA_c);
+		pr_debug("SB: %ld %08lx %ld (%ld)\n", SB_s, SB_f, SB_e, SB_c);
 
 		switch (func) {
 		case EFSABS:
@@ -305,10 +297,10 @@ int do_spe_mathemu(struct pt_regs *regs)
 			FP_DECL_D(DB);
 			FP_CLEAR_EXCEPTIONS;
 			FP_UNPACK_DP(DB, vb.dp);
-#ifdef DEBUG
-			printk("DB: %ld %08lx %08lx %ld (%ld)\n",
+
+			pr_debug("DB: %ld %08lx %08lx %ld (%ld)\n",
 					DB_s, DB_f1, DB_f0, DB_e, DB_c);
-#endif
+
 			FP_CONV(S, D, 1, 2, SR, DB);
 			goto pack_s;
 		}
@@ -332,9 +324,8 @@ int do_spe_mathemu(struct pt_regs *regs)
 		break;
 
 pack_s:
-#ifdef DEBUG
-		printk("SR: %ld %08lx %ld (%ld)\n", SR_s, SR_f, SR_e, SR_c);
-#endif
+		pr_debug("SR: %ld %08lx %ld (%ld)\n", SR_s, SR_f, SR_e, SR_c);
+
 		FP_PACK_SP(vc.wp + 1, SR);
 		goto update_regs;
 
@@ -365,12 +356,10 @@ cmp_s:
 			break;
 		}
 
-#ifdef DEBUG
-		printk("DA: %ld %08lx %08lx %ld (%ld)\n",
+		pr_debug("DA: %ld %08lx %08lx %ld (%ld)\n",
 				DA_s, DA_f1, DA_f0, DA_e, DA_c);
-		printk("DB: %ld %08lx %08lx %ld (%ld)\n",
+		pr_debug("DB: %ld %08lx %08lx %ld (%ld)\n",
 				DB_s, DB_f1, DB_f0, DB_e, DB_c);
-#endif
 
 		switch (func) {
 		case EFDABS:
@@ -438,10 +427,10 @@ cmp_s:
 			FP_DECL_S(SB);
 			FP_CLEAR_EXCEPTIONS;
 			FP_UNPACK_SP(SB, vb.wp + 1);
-#ifdef DEBUG
-			printk("SB: %ld %08lx %ld (%ld)\n",
+
+			pr_debug("SB: %ld %08lx %ld (%ld)\n",
 					SB_s, SB_f, SB_e, SB_c);
-#endif
+
 			FP_CONV(D, S, 2, 1, DR, SB);
 			goto pack_d;
 		}
@@ -471,10 +460,9 @@ cmp_s:
 		break;
 
 pack_d:
-#ifdef DEBUG
-		printk("DR: %ld %08lx %08lx %ld (%ld)\n",
+		pr_debug("DR: %ld %08lx %08lx %ld (%ld)\n",
 				DR_s, DR_f1, DR_f0, DR_e, DR_c);
-#endif
+
 		FP_PACK_DP(vc.dp, DR);
 		goto update_regs;
 
@@ -511,12 +499,14 @@ cmp_d:
 			break;
 		}
 
-#ifdef DEBUG
-		printk("SA0: %ld %08lx %ld (%ld)\n", SA0_s, SA0_f, SA0_e, SA0_c);
-		printk("SA1: %ld %08lx %ld (%ld)\n", SA1_s, SA1_f, SA1_e, SA1_c);
-		printk("SB0: %ld %08lx %ld (%ld)\n", SB0_s, SB0_f, SB0_e, SB0_c);
-		printk("SB1: %ld %08lx %ld (%ld)\n", SB1_s, SB1_f, SB1_e, SB1_c);
-#endif
+		pr_debug("SA0: %ld %08lx %ld (%ld)\n",
+				SA0_s, SA0_f, SA0_e, SA0_c);
+		pr_debug("SA1: %ld %08lx %ld (%ld)\n",
+				SA1_s, SA1_f, SA1_e, SA1_c);
+		pr_debug("SB0: %ld %08lx %ld (%ld)\n",
+				SB0_s, SB0_f, SB0_e, SB0_c);
+		pr_debug("SB1: %ld %08lx %ld (%ld)\n",
+				SB1_s, SB1_f, SB1_e, SB1_c);
 
 		switch (func) {
 		case EVFSABS:
@@ -605,10 +595,11 @@ cmp_d:
 		break;
 
 pack_vs:
-#ifdef DEBUG
-		printk("SR0: %ld %08lx %ld (%ld)\n", SR0_s, SR0_f, SR0_e, SR0_c);
-		printk("SR1: %ld %08lx %ld (%ld)\n", SR1_s, SR1_f, SR1_e, SR1_c);
-#endif
+		pr_debug("SR0: %ld %08lx %ld (%ld)\n",
+				SR0_s, SR0_f, SR0_e, SR0_c);
+		pr_debug("SR1: %ld %08lx %ld (%ld)\n",
+				SR1_s, SR1_f, SR1_e, SR1_c);
+
 		FP_PACK_SP(vc.wp, SR0);
 		FP_PACK_SP(vc.wp + 1, SR1);
 		goto update_regs;
@@ -646,14 +637,12 @@ update_regs:
 	current->thread.evr[fc] = vc.wp[0];
 	regs->gpr[fc] = vc.wp[1];
 
-#ifdef DEBUG
-	printk("ccr = %08lx\n", regs->ccr);
-	printk("cur exceptions = %08x spefscr = %08lx\n",
+	pr_debug("ccr = %08lx\n", regs->ccr);
+	pr_debug("cur exceptions = %08x spefscr = %08lx\n",
 			FP_CUR_EXCEPTIONS, __FPU_FPSCR);
-	printk("vc: %08x  %08x\n", vc.wp[0], vc.wp[1]);
-	printk("va: %08x  %08x\n", va.wp[0], va.wp[1]);
-	printk("vb: %08x  %08x\n", vb.wp[0], vb.wp[1]);
-#endif
+	pr_debug("vc: %08x  %08x\n", vc.wp[0], vc.wp[1]);
+	pr_debug("va: %08x  %08x\n", va.wp[0], va.wp[1]);
+	pr_debug("vb: %08x  %08x\n", vb.wp[0], vb.wp[1]);
 
 	return 0;
 
@@ -661,9 +650,7 @@ illegal:
 	if (have_e500_cpu_a005_erratum) {
 		/* according to e500 cpu a005 erratum, reissue efp inst */
 		regs->nip -= 4;
-#ifdef DEBUG
-		printk(KERN_DEBUG "re-issue efp inst: %08lx\n", speinsn);
-#endif
+		pr_debug("re-issue efp inst: %08lx\n", speinsn);
 		return 0;
 	}
 
@@ -685,13 +672,20 @@ int speround_handler(struct pt_regs *regs)
 	type = insn_type(speinsn & 0x7ff);
 	if (type == XCR) return -ENOSYS;
 
+	__FPU_FPSCR = mfspr(SPRN_SPEFSCR);
+	pr_debug("speinsn:%08lx spefscr:%08lx\n", speinsn, __FPU_FPSCR);
+
+	/* No need to round if the result is exact */
+	if (!(__FPU_FPSCR & FP_EX_INEXACT))
+		return 0;
+
 	fc = (speinsn >> 21) & 0x1f;
 	s_lo = regs->gpr[fc] & SIGN_BIT_S;
 	s_hi = current->thread.evr[fc] & SIGN_BIT_S;
 	fgpr.wp[0] = current->thread.evr[fc];
 	fgpr.wp[1] = regs->gpr[fc];
 
-	__FPU_FPSCR = mfspr(SPRN_SPEFSCR);
+	pr_debug("round fgpr: %08x  %08x\n", fgpr.wp[0], fgpr.wp[1]);
 
 	switch ((speinsn >> 5) & 0x7) {
 	/* Since SPE instructions on E500 core can handle round to nearest
@@ -731,6 +725,8 @@ int speround_handler(struct pt_regs *regs)
 	current->thread.evr[fc] = fgpr.wp[0];
 	regs->gpr[fc] = fgpr.wp[1];
 
+	pr_debug("  to fgpr: %08x  %08x\n", fgpr.wp[0], fgpr.wp[1]);
+
 	return 0;
 }
 

arch/powerpc/mm/Makefile

@@ -29,6 +29,7 @@ obj-$(CONFIG_PPC_MM_SLICES)	+= slice.o
 ifeq ($(CONFIG_HUGETLB_PAGE),y)
 obj-y				+= hugetlbpage.o
 obj-$(CONFIG_PPC_STD_MMU_64)	+= hugetlbpage-hash64.o
+obj-$(CONFIG_PPC_BOOK3E_MMU)	+= hugetlbpage-book3e.o
 endif
 obj-$(CONFIG_PPC_SUBPAGE_PROT)	+= subpage-prot.o
 obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o

arch/powerpc/mm/fsl_booke_mmu.c

@@ -101,17 +101,17 @@ unsigned long p_mapped_by_tlbcam(phys_addr_t pa)
 
 /*
  * Set up a variable-size TLB entry (tlbcam). The parameters are not checked;
- * in particular size must be a power of 4 between 4k and 256M (or 1G, for cpus
- * that support extended page sizes).  Note that while some cpus support a
- * page size of 4G, we don't allow its use here.
+ * in particular size must be a power of 4 between 4k and the max supported by
+ * an implementation; max may further be limited by what can be represented in
+ * an unsigned long (for example, 32-bit implementations cannot support a 4GB
+ * size).
  */
 static void settlbcam(int index, unsigned long virt, phys_addr_t phys,
 		unsigned long size, unsigned long flags, unsigned int pid)
 {
-	unsigned int tsize, lz;
+	unsigned int tsize;
 
-	asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (size));
-	tsize = 21 - lz;
+	tsize = __ilog2(size) - 10;
 
 #ifdef CONFIG_SMP
 	if ((flags & _PAGE_NO_CACHE) == 0)
@@ -146,29 +146,36 @@ static void settlbcam(int index, unsigned long virt, phys_addr_t phys,
 	loadcam_entry(index);
 }
 
+unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
+			  phys_addr_t phys)
+{
+	unsigned int camsize = __ilog2(ram) & ~1U;
+	unsigned int align = __ffs(virt | phys) & ~1U;
+	unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
+
+	/* Convert (4^max) kB to (2^max) bytes */
+	max_cam = max_cam * 2 + 10;
+
+	if (camsize > align)
+		camsize = align;
+	if (camsize > max_cam)
+		camsize = max_cam;
+
+	return 1UL << camsize;
+}
+
 unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
 {
 	int i;
 	unsigned long virt = PAGE_OFFSET;
 	phys_addr_t phys = memstart_addr;
 	unsigned long amount_mapped = 0;
-	unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
-
-	/* Convert (4^max) kB to (2^max) bytes */
-	max_cam = max_cam * 2 + 10;
 
 	/* Calculate CAM values */
 	for (i = 0; ram && i < max_cam_idx; i++) {
-		unsigned int camsize = __ilog2(ram) & ~1U;
-		unsigned int align = __ffs(virt | phys) & ~1U;
 		unsigned long cam_sz;
 
-		if (camsize > align)
-			camsize = align;
-		if (camsize > max_cam)
-			camsize = max_cam;
-
-		cam_sz = 1UL << camsize;
+		cam_sz = calc_cam_sz(ram, virt, phys);
 		settlbcam(i, virt, phys, cam_sz, PAGE_KERNEL_X, 0);
 
 		ram -= cam_sz;

arch/powerpc/mm/hash_utils_64.c

@@ -105,9 +105,6 @@ int mmu_kernel_ssize = MMU_SEGSIZE_256M;
 int mmu_highuser_ssize = MMU_SEGSIZE_256M;
 u16 mmu_slb_size = 64;
 EXPORT_SYMBOL_GPL(mmu_slb_size);
-#ifdef CONFIG_HUGETLB_PAGE
-unsigned int HPAGE_SHIFT;
-#endif
 #ifdef CONFIG_PPC_64K_PAGES
 int mmu_ci_restrictions;
 #endif
@@ -534,11 +531,11 @@ static unsigned long __init htab_get_table_size(void)
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG
-void create_section_mapping(unsigned long start, unsigned long end)
+int create_section_mapping(unsigned long start, unsigned long end)
 {
-	BUG_ON(htab_bolt_mapping(start, end, __pa(start),
+	return htab_bolt_mapping(start, end, __pa(start),
 				 pgprot_val(PAGE_KERNEL), mmu_linear_psize,
-				 mmu_kernel_ssize));
+				 mmu_kernel_ssize);
 }
 
 int remove_section_mapping(unsigned long start, unsigned long end)

arch/powerpc/mm/hugetlbpage-book3e.c

@@ -0,0 +1,121 @@
+/*
+ * PPC Huge TLB Page Support for Book3E MMU
+ *
+ * Copyright (C) 2009 David Gibson, IBM Corporation.
+ * Copyright (C) 2011 Becky Bruce, Freescale Semiconductor
+ *
+ */
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+
+static inline int mmu_get_tsize(int psize)
+{
+	return mmu_psize_defs[psize].enc;
+}
+
+static inline int book3e_tlb_exists(unsigned long ea, unsigned long pid)
+{
+	int found = 0;
+
+	mtspr(SPRN_MAS6, pid << 16);
+	if (mmu_has_feature(MMU_FTR_USE_TLBRSRV)) {
+		asm volatile(
+			"li	%0,0\n"
+			"tlbsx.	0,%1\n"
+			"bne	1f\n"
+			"li	%0,1\n"
+			"1:\n"
+			: "=&r"(found) : "r"(ea));
+	} else {
+		asm volatile(
+			"tlbsx	0,%1\n"
+			"mfspr	%0,0x271\n"
+			"srwi	%0,%0,31\n"
+			: "=&r"(found) : "r"(ea));
+	}
+
+	return found;
+}
+
+void book3e_hugetlb_preload(struct mm_struct *mm, unsigned long ea, pte_t pte)
+{
+	unsigned long mas1, mas2;
+	u64 mas7_3;
+	unsigned long psize, tsize, shift;
+	unsigned long flags;
+
+#ifdef CONFIG_PPC_FSL_BOOK3E
+	int index, lz, ncams;
+	struct vm_area_struct *vma;
+#endif
+
+	if (unlikely(is_kernel_addr(ea)))
+		return;
+
+#ifdef CONFIG_PPC_MM_SLICES
+	psize = mmu_get_tsize(get_slice_psize(mm, ea));
+	tsize = mmu_get_psize(psize);
+	shift = mmu_psize_defs[psize].shift;
+#else
+	vma = find_vma(mm, ea);
+	psize = vma_mmu_pagesize(vma);	/* returns actual size in bytes */
+	asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (psize));
+	shift = 31 - lz;
+	tsize = 21 - lz;
+#endif
+
+	/*
+	 * We can't be interrupted while we're setting up the MAS
+	 * regusters or after we've confirmed that no tlb exists.
+	 */
+	local_irq_save(flags);
+
+	if (unlikely(book3e_tlb_exists(ea, mm->context.id))) {
+		local_irq_restore(flags);
+		return;
+	}
+
+#ifdef CONFIG_PPC_FSL_BOOK3E
+	ncams = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY;
+
+	/* We have to use the CAM(TLB1) on FSL parts for hugepages */
+	index = __get_cpu_var(next_tlbcam_idx);
+	mtspr(SPRN_MAS0, MAS0_ESEL(index) | MAS0_TLBSEL(1));
+
+	/* Just round-robin the entries and wrap when we hit the end */
+	if (unlikely(index == ncams - 1))
+		__get_cpu_var(next_tlbcam_idx) = tlbcam_index;
+	else
+		__get_cpu_var(next_tlbcam_idx)++;
+#endif
+	mas1 = MAS1_VALID | MAS1_TID(mm->context.id) | MAS1_TSIZE(tsize);
+	mas2 = ea & ~((1UL << shift) - 1);
+	mas2 |= (pte_val(pte) >> PTE_WIMGE_SHIFT) & MAS2_WIMGE_MASK;
+	mas7_3 = (u64)pte_pfn(pte) << PAGE_SHIFT;
+	mas7_3 |= (pte_val(pte) >> PTE_BAP_SHIFT) & MAS3_BAP_MASK;
+	if (!pte_dirty(pte))
+		mas7_3 &= ~(MAS3_SW|MAS3_UW);
+
+	mtspr(SPRN_MAS1, mas1);
+	mtspr(SPRN_MAS2, mas2);
+
+	if (mmu_has_feature(MMU_FTR_USE_PAIRED_MAS)) {
+		mtspr(SPRN_MAS7_MAS3, mas7_3);
+	} else {
+		mtspr(SPRN_MAS7, upper_32_bits(mas7_3));
+		mtspr(SPRN_MAS3, lower_32_bits(mas7_3));
+	}
+
+	asm volatile ("tlbwe");
+
+	local_irq_restore(flags);
+}
+
+void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+	struct hstate *hstate = hstate_file(vma->vm_file);
+	unsigned long tsize = huge_page_shift(hstate) - 10;
+
+	__flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, tsize, 0);
+
+}

arch/powerpc/mm/hugetlbpage.c

@@ -1,7 +1,8 @@
 /*
- * PPC64 (POWER4) Huge TLB Page Support for Kernel.
+ * PPC Huge TLB Page Support for Kernel.
  *
  * Copyright (C) 2003 David Gibson, IBM Corporation.
+ * Copyright (C) 2011 Becky Bruce, Freescale Semiconductor
  *
  * Based on the IA-32 version:
  * Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com>
@@ -11,24 +12,39 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/hugetlb.h>
+#include <linux/of_fdt.h>
+#include <linux/memblock.h>
+#include <linux/bootmem.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/tlb.h>
+#include <asm/setup.h>
 
 #define PAGE_SHIFT_64K	16
 #define PAGE_SHIFT_16M	24
 #define PAGE_SHIFT_16G	34
 
-#define MAX_NUMBER_GPAGES	1024
+unsigned int HPAGE_SHIFT;
 
-/* Tracks the 16G pages after the device tree is scanned and before the
- * huge_boot_pages list is ready.  */
-static unsigned long gpage_freearray[MAX_NUMBER_GPAGES];
+/*
+ * Tracks gpages after the device tree is scanned and before the
+ * huge_boot_pages list is ready.  On 64-bit implementations, this is
+ * just used to track 16G pages and so is a single array.  32-bit
+ * implementations may have more than one gpage size due to limitations
+ * of the memory allocators, so we need multiple arrays
+ */
+#ifdef CONFIG_PPC64
+#define MAX_NUMBER_GPAGES	1024
+static u64 gpage_freearray[MAX_NUMBER_GPAGES];
 static unsigned nr_gpages;
-
-/* Flag to mark huge PD pointers.  This means pmd_bad() and pud_bad()
- * will choke on pointers to hugepte tables, which is handy for
- * catching screwups early. */
+#else
+#define MAX_NUMBER_GPAGES	128
+struct psize_gpages {
+	u64 gpage_list[MAX_NUMBER_GPAGES];
+	unsigned int nr_gpages;
+};
+static struct psize_gpages gpage_freearray[MMU_PAGE_COUNT];
+#endif
 
 static inline int shift_to_mmu_psize(unsigned int shift)
 {
@@ -49,25 +65,6 @@ static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize)
 
 #define hugepd_none(hpd)	((hpd).pd == 0)
 
-static inline pte_t *hugepd_page(hugepd_t hpd)
-{
-	BUG_ON(!hugepd_ok(hpd));
-	return (pte_t *)((hpd.pd & ~HUGEPD_SHIFT_MASK) | 0xc000000000000000);
-}
-
-static inline unsigned int hugepd_shift(hugepd_t hpd)
-{
-	return hpd.pd & HUGEPD_SHIFT_MASK;
-}
-
-static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr, unsigned pdshift)
-{
-	unsigned long idx = (addr & ((1UL << pdshift) - 1)) >> hugepd_shift(*hpdp);
-	pte_t *dir = hugepd_page(*hpdp);
-
-	return dir + idx;
-}
-
 pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
 {
 	pgd_t *pg;
@@ -93,7 +90,7 @@ pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift
 			if (is_hugepd(pm))
 				hpdp = (hugepd_t *)pm;
 			else if (!pmd_none(*pm)) {
-				return pte_offset_map(pm, ea);
+				return pte_offset_kernel(pm, ea);
 			}
 		}
 	}
@@ -114,8 +111,18 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 			   unsigned long address, unsigned pdshift, unsigned pshift)
 {
-	pte_t *new = kmem_cache_zalloc(PGT_CACHE(pdshift - pshift),
-				       GFP_KERNEL|__GFP_REPEAT);
+	struct kmem_cache *cachep;
+	pte_t *new;
+
+#ifdef CONFIG_PPC64
+	cachep = PGT_CACHE(pdshift - pshift);
+#else
+	int i;
+	int num_hugepd = 1 << (pshift - pdshift);
+	cachep = hugepte_cache;
+#endif
+
+	new = kmem_cache_zalloc(cachep, GFP_KERNEL|__GFP_REPEAT);
 
 	BUG_ON(pshift > HUGEPD_SHIFT_MASK);
 	BUG_ON((unsigned long)new & HUGEPD_SHIFT_MASK);
@@ -124,10 +131,31 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 		return -ENOMEM;
 
 	spin_lock(&mm->page_table_lock);
+#ifdef CONFIG_PPC64
 	if (!hugepd_none(*hpdp))
-		kmem_cache_free(PGT_CACHE(pdshift - pshift), new);
+		kmem_cache_free(cachep, new);
 	else
-		hpdp->pd = ((unsigned long)new & ~0x8000000000000000) | pshift;
+		hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift;
+#else
+	/*
+	 * We have multiple higher-level entries that point to the same
+	 * actual pte location.  Fill in each as we go and backtrack on error.
+	 * We need all of these so the DTLB pgtable walk code can find the
+	 * right higher-level entry without knowing if it's a hugepage or not.
+	 */
+	for (i = 0; i < num_hugepd; i++, hpdp++) {
+		if (unlikely(!hugepd_none(*hpdp)))
+			break;
+		else
+			hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift;
+	}
+	/* If we bailed from the for loop early, an error occurred, clean up */
+	if (i < num_hugepd) {
+		for (i = i - 1 ; i >= 0; i--, hpdp--)
+			hpdp->pd = 0;
+		kmem_cache_free(cachep, new);
+	}
+#endif
 	spin_unlock(&mm->page_table_lock);
 	return 0;
 }
@@ -169,11 +197,132 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz
 	return hugepte_offset(hpdp, addr, pdshift);
 }
 
+#ifdef CONFIG_PPC32
 /* Build list of addresses of gigantic pages.  This function is used in early
  * boot before the buddy or bootmem allocator is setup.
  */
-void add_gpage(unsigned long addr, unsigned long page_size,
-	unsigned long number_of_pages)
+void add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages)
+{
+	unsigned int idx = shift_to_mmu_psize(__ffs(page_size));
+	int i;
+
+	if (addr == 0)
+		return;
+
+	gpage_freearray[idx].nr_gpages = number_of_pages;
+
+	for (i = 0; i < number_of_pages; i++) {
+		gpage_freearray[idx].gpage_list[i] = addr;
+		addr += page_size;
+	}
+}
+
+/*
+ * Moves the gigantic page addresses from the temporary list to the
+ * huge_boot_pages list.
+ */
+int alloc_bootmem_huge_page(struct hstate *hstate)
+{
+	struct huge_bootmem_page *m;
+	int idx = shift_to_mmu_psize(hstate->order + PAGE_SHIFT);
+	int nr_gpages = gpage_freearray[idx].nr_gpages;
+
+	if (nr_gpages == 0)
+		return 0;
+
+#ifdef CONFIG_HIGHMEM
+	/*
+	 * If gpages can be in highmem we can't use the trick of storing the
+	 * data structure in the page; allocate space for this
+	 */
+	m = alloc_bootmem(sizeof(struct huge_bootmem_page));
+	m->phys = gpage_freearray[idx].gpage_list[--nr_gpages];
+#else
+	m = phys_to_virt(gpage_freearray[idx].gpage_list[--nr_gpages]);
+#endif
+
+	list_add(&m->list, &huge_boot_pages);
+	gpage_freearray[idx].nr_gpages = nr_gpages;
+	gpage_freearray[idx].gpage_list[nr_gpages] = 0;
+	m->hstate = hstate;
+
+	return 1;
+}
+/*
+ * Scan the command line hugepagesz= options for gigantic pages; store those in
+ * a list that we use to allocate the memory once all options are parsed.
+ */
+
+unsigned long gpage_npages[MMU_PAGE_COUNT];
+
+static int __init do_gpage_early_setup(char *param, char *val)
+{
+	static phys_addr_t size;
+	unsigned long npages;
+
+	/*
+	 * The hugepagesz and hugepages cmdline options are interleaved.  We
+	 * use the size variable to keep track of whether or not this was done
+	 * properly and skip over instances where it is incorrect.  Other
+	 * command-line parsing code will issue warnings, so we don't need to.
+	 *
+	 */
+	if ((strcmp(param, "default_hugepagesz") == 0) ||
+	    (strcmp(param, "hugepagesz") == 0)) {
+		size = memparse(val, NULL);
+	} else if (strcmp(param, "hugepages") == 0) {
+		if (size != 0) {
+			if (sscanf(val, "%lu", &npages) <= 0)
+				npages = 0;
+			gpage_npages[shift_to_mmu_psize(__ffs(size))] = npages;
+			size = 0;
+		}
+	}
+	return 0;
+}
+
+
+/*
+ * This function allocates physical space for pages that are larger than the
+ * buddy allocator can handle.  We want to allocate these in highmem because
+ * the amount of lowmem is limited.  This means that this function MUST be
+ * called before lowmem_end_addr is set up in MMU_init() in order for the lmb
+ * allocate to grab highmem.
+ */
+void __init reserve_hugetlb_gpages(void)
+{
+	static __initdata char cmdline[COMMAND_LINE_SIZE];
+	phys_addr_t size, base;
+	int i;
+
+	strlcpy(cmdline, boot_command_line, COMMAND_LINE_SIZE);
+	parse_args("hugetlb gpages", cmdline, NULL, 0, &do_gpage_early_setup);
+
+	/*
+	 * Walk gpage list in reverse, allocating larger page sizes first.
+	 * Skip over unsupported sizes, or sizes that have 0 gpages allocated.
+	 * When we reach the point in the list where pages are no longer
+	 * considered gpages, we're done.
+	 */
+	for (i = MMU_PAGE_COUNT-1; i >= 0; i--) {
+		if (mmu_psize_defs[i].shift == 0 || gpage_npages[i] == 0)
+			continue;
+		else if (mmu_psize_to_shift(i) < (MAX_ORDER + PAGE_SHIFT))
+			break;
+
+		size = (phys_addr_t)(1ULL << mmu_psize_to_shift(i));
+		base = memblock_alloc_base(size * gpage_npages[i], size,
+					   MEMBLOCK_ALLOC_ANYWHERE);
+		add_gpage(base, size, gpage_npages[i]);
+	}
+}
+
+#else /* PPC64 */
+
+/* Build list of addresses of gigantic pages.  This function is used in early
+ * boot before the buddy or bootmem allocator is setup.
+ */
+void add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages)
 {
 	if (!addr)
 		return;
@@ -199,19 +348,79 @@ int alloc_bootmem_huge_page(struct hstate *hstate)
 	m->hstate = hstate;
 	return 1;
 }
+#endif
 
 int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
 {
 	return 0;
 }
 
+#ifdef CONFIG_PPC32
+#define HUGEPD_FREELIST_SIZE \
+	((PAGE_SIZE - sizeof(struct hugepd_freelist)) / sizeof(pte_t))
+
+struct hugepd_freelist {
+	struct rcu_head	rcu;
+	unsigned int index;
+	void *ptes[0];
+};
+
+static DEFINE_PER_CPU(struct hugepd_freelist *, hugepd_freelist_cur);
+
+static void hugepd_free_rcu_callback(struct rcu_head *head)
+{
+	struct hugepd_freelist *batch =
+		container_of(head, struct hugepd_freelist, rcu);
+	unsigned int i;
+
+	for (i = 0; i < batch->index; i++)
+		kmem_cache_free(hugepte_cache, batch->ptes[i]);
+
+	free_page((unsigned long)batch);
+}
+
+static void hugepd_free(struct mmu_gather *tlb, void *hugepte)
+{
+	struct hugepd_freelist **batchp;
+
+	batchp = &__get_cpu_var(hugepd_freelist_cur);
+
+	if (atomic_read(&tlb->mm->mm_users) < 2 ||
+	    cpumask_equal(mm_cpumask(tlb->mm),
+			  cpumask_of(smp_processor_id()))) {
+		kmem_cache_free(hugepte_cache, hugepte);
+		return;
+	}
+
+	if (*batchp == NULL) {
+		*batchp = (struct hugepd_freelist *)__get_free_page(GFP_ATOMIC);
+		(*batchp)->index = 0;
+	}
+
+	(*batchp)->ptes[(*batchp)->index++] = hugepte;
+	if ((*batchp)->index == HUGEPD_FREELIST_SIZE) {
+		call_rcu_sched(&(*batchp)->rcu, hugepd_free_rcu_callback);
+		*batchp = NULL;
+	}
+}
+#endif
+
 static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshift,
 			      unsigned long start, unsigned long end,
 			      unsigned long floor, unsigned long ceiling)
 {
 	pte_t *hugepte = hugepd_page(*hpdp);
-	unsigned shift = hugepd_shift(*hpdp);
+	int i;
+
 	unsigned long pdmask = ~((1UL << pdshift) - 1);
+	unsigned int num_hugepd = 1;
+
+#ifdef CONFIG_PPC64
+	unsigned int shift = hugepd_shift(*hpdp);
+#else
+	/* Note: On 32-bit the hpdp may be the first of several */
+	num_hugepd = (1 << (hugepd_shift(*hpdp) - pdshift));
+#endif
 
 	start &= pdmask;
 	if (start < floor)
@@ -224,9 +433,15 @@ static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshif
 	if (end - 1 > ceiling - 1)
 		return;
 
-	hpdp->pd = 0;
+	for (i = 0; i < num_hugepd; i++, hpdp++)
+		hpdp->pd = 0;
+
 	tlb->need_flush = 1;
+#ifdef CONFIG_PPC64
 	pgtable_free_tlb(tlb, hugepte, pdshift - shift);
+#else
+	hugepd_free(tlb, hugepte);
+#endif
 }
 
 static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
@@ -331,18 +546,27 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 	 * too.
 	 */
 
-	pgd = pgd_offset(tlb->mm, addr);
 	do {
 		next = pgd_addr_end(addr, end);
+		pgd = pgd_offset(tlb->mm, addr);
 		if (!is_hugepd(pgd)) {
 			if (pgd_none_or_clear_bad(pgd))
 				continue;
 			hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
 		} else {
+#ifdef CONFIG_PPC32
+			/*
+			 * Increment next by the size of the huge mapping since
+			 * on 32-bit there may be more than one entry at the pgd
+			 * level for a single hugepage, but all of them point to
+			 * the same kmem cache that holds the hugepte.
+			 */
+			next = addr + (1 << hugepd_shift(*(hugepd_t *)pgd));
+#endif
 			free_hugepd_range(tlb, (hugepd_t *)pgd, PGDIR_SHIFT,
 					  addr, next, floor, ceiling);
 		}
-	} while (pgd++, addr = next, addr != end);
+	} while (addr = next, addr != end);
 }
 
 struct page *
@@ -477,17 +701,35 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 					unsigned long len, unsigned long pgoff,
 					unsigned long flags)
 {
+#ifdef CONFIG_PPC_MM_SLICES
 	struct hstate *hstate = hstate_file(file);
 	int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
 
 	return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
+#else
+	return get_unmapped_area(file, addr, len, pgoff, flags);
+#endif
 }
 
 unsigned long vma_mmu_pagesize(struct vm_area_struct *vma)
 {
+#ifdef CONFIG_PPC_MM_SLICES
 	unsigned int psize = get_slice_psize(vma->vm_mm, vma->vm_start);
 
 	return 1UL << mmu_psize_to_shift(psize);
+#else
+	if (!is_vm_hugetlb_page(vma))
+		return PAGE_SIZE;
+
+	return huge_page_size(hstate_vma(vma));
+#endif
+}
+
+static inline bool is_power_of_4(unsigned long x)
+{
+	if (is_power_of_2(x))
+		return (__ilog2(x) % 2) ? false : true;
+	return false;
 }
 
 static int __init add_huge_page_size(unsigned long long size)
@@ -497,9 +739,14 @@ static int __init add_huge_page_size(unsigned long long size)
 
 	/* Check that it is a page size supported by the hardware and
 	 * that it fits within pagetable and slice limits. */
+#ifdef CONFIG_PPC_FSL_BOOK3E
+	if ((size < PAGE_SIZE) || !is_power_of_4(size))
+		return -EINVAL;
+#else
 	if (!is_power_of_2(size)
 	    || (shift > SLICE_HIGH_SHIFT) || (shift <= PAGE_SHIFT))
 		return -EINVAL;
+#endif
 
 	if ((mmu_psize = shift_to_mmu_psize(shift)) < 0)
 		return -EINVAL;
@@ -536,6 +783,46 @@ static int __init hugepage_setup_sz(char *str)
 }
 __setup("hugepagesz=", hugepage_setup_sz);
 
+#ifdef CONFIG_FSL_BOOKE
+struct kmem_cache *hugepte_cache;
+static int __init hugetlbpage_init(void)
+{
+	int psize;
+
+	for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+		unsigned shift;
+
+		if (!mmu_psize_defs[psize].shift)
+			continue;
+
+		shift = mmu_psize_to_shift(psize);
+
+		/* Don't treat normal page sizes as huge... */
+		if (shift != PAGE_SHIFT)
+			if (add_huge_page_size(1ULL << shift) < 0)
+				continue;
+	}
+
+	/*
+	 * Create a kmem cache for hugeptes.  The bottom bits in the pte have
+	 * size information encoded in them, so align them to allow this
+	 */
+	hugepte_cache =  kmem_cache_create("hugepte-cache", sizeof(pte_t),
+					   HUGEPD_SHIFT_MASK + 1, 0, NULL);
+	if (hugepte_cache == NULL)
+		panic("%s: Unable to create kmem cache for hugeptes\n",
+		      __func__);
+
+	/* Default hpage size = 4M */
+	if (mmu_psize_defs[MMU_PAGE_4M].shift)
+		HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_4M].shift;
+	else
+		panic("%s: Unable to set default huge page size\n", __func__);
+
+
+	return 0;
+}
+#else
 static int __init hugetlbpage_init(void)
 {
 	int psize;
@@ -578,15 +865,23 @@ static int __init hugetlbpage_init(void)
 
 	return 0;
 }
-
+#endif
 module_init(hugetlbpage_init);
 
 void flush_dcache_icache_hugepage(struct page *page)
 {
 	int i;
+	void *start;
 
 	BUG_ON(!PageCompound(page));
 
-	for (i = 0; i < (1UL << compound_order(page)); i++)
-		__flush_dcache_icache(page_address(page+i));
+	for (i = 0; i < (1UL << compound_order(page)); i++) {
+		if (!PageHighMem(page)) {
+			__flush_dcache_icache(page_address(page+i));
+		} else {
+			start = kmap_atomic(page+i, KM_PPC_SYNC_ICACHE);
+			__flush_dcache_icache(start);
+			kunmap_atomic(start, KM_PPC_SYNC_ICACHE);
+		}
+	}
 }

arch/powerpc/mm/init_32.c

@@ -32,6 +32,8 @@
 #include <linux/pagemap.h>
 #include <linux/memblock.h>
 #include <linux/gfp.h>
+#include <linux/slab.h>
+#include <linux/hugetlb.h>
 
 #include <asm/pgalloc.h>
 #include <asm/prom.h>
@@ -44,6 +46,7 @@
 #include <asm/tlb.h>
 #include <asm/sections.h>
 #include <asm/system.h>
+#include <asm/hugetlb.h>
 
 #include "mmu_decl.h"
 
@@ -123,6 +126,12 @@ void __init MMU_init(void)
 	/* parse args from command line */
 	MMU_setup();
 
+	/*
+	 * Reserve gigantic pages for hugetlb.  This MUST occur before
+	 * lowmem_end_addr is initialized below.
+	 */
+	reserve_hugetlb_gpages();
+
 	if (memblock.memory.cnt > 1) {
 #ifndef CONFIG_WII
 		memblock.memory.cnt = 1;