Merge branch 'bonding_netlink'

Scott Feldman says:

====================
bonding: add more netlink attributes

v2:

Addressed v1 review comments.  In particular, Jay's concern about
current sysfs ordering limitations carrying over to iproute.  Netlink
attributes are processed in a priority order in
bond_netlink.c:bond_changelink().  Lower priority attributes can't undo
higher priority attributes when attempting to set both with iproute
command.  For example, this command will fail:

  ip link add bond1 type bond mode active-backup miimon 10 arp_interval 10

Because we're trying to create a new bond to use incompatible miimon
and ARP interval attributes.  However, if attributes are applied
one-at-a-time, previously applied attributes can be overridden:

  ip link add bond1 type bond mode active-backup miimon 10
  ip link set dev bond1 type bond arp_interval 10

These two commands succeed.  The bond is first created to use miimon.
Next, the bond is converted to use ARP interval, which undoes miimon.

v1:

Following Jiri Pirko's lead, add more bonding netlink attributes.  Sending
matching iproute2 patch separately.  sysfs access to attributes is
retained.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/bonding/bond_netlink.c

@@ -1,6 +1,7 @@
 /*
  * drivers/net/bond/bond_netlink.c - Netlink interface for bonding
  * Copyright (c) 2013 Jiri Pirko <jiri@resnulli.us>
+ * Copyright (c) 2013 Scott Feldman <sfeldma@cumulusnetworks.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -23,6 +24,14 @@
 static const struct nla_policy bond_policy[IFLA_BOND_MAX + 1] = {
 	[IFLA_BOND_MODE]		= { .type = NLA_U8 },
 	[IFLA_BOND_ACTIVE_SLAVE]	= { .type = NLA_U32 },
+	[IFLA_BOND_MIIMON]		= { .type = NLA_U32 },
+	[IFLA_BOND_UPDELAY]		= { .type = NLA_U32 },
+	[IFLA_BOND_DOWNDELAY]		= { .type = NLA_U32 },
+	[IFLA_BOND_USE_CARRIER]		= { .type = NLA_U8 },
+	[IFLA_BOND_ARP_INTERVAL]	= { .type = NLA_U32 },
+	[IFLA_BOND_ARP_IP_TARGET]	= { .type = NLA_NESTED },
+	[IFLA_BOND_ARP_VALIDATE]	= { .type = NLA_U32 },
+	[IFLA_BOND_ARP_ALL_TARGETS]	= { .type = NLA_U32 },
 };
 
 static int bond_validate(struct nlattr *tb[], struct nlattr *data[])
@@ -40,16 +49,20 @@ static int bond_changelink(struct net_device *bond_dev,
 			   struct nlattr *tb[], struct nlattr *data[])
 {
 	struct bonding *bond = netdev_priv(bond_dev);
+	int miimon = 0;
 	int err;
 
-	if (data && data[IFLA_BOND_MODE]) {
+	if (!data)
+		return 0;
+
+	if (data[IFLA_BOND_MODE]) {
 		int mode = nla_get_u8(data[IFLA_BOND_MODE]);
 
 		err = bond_option_mode_set(bond, mode);
 		if (err)
 			return err;
 	}
-	if (data && data[IFLA_BOND_ACTIVE_SLAVE]) {
+	if (data[IFLA_BOND_ACTIVE_SLAVE]) {
 		int ifindex = nla_get_u32(data[IFLA_BOND_ACTIVE_SLAVE]);
 		struct net_device *slave_dev;
 
@@ -65,6 +78,82 @@ static int bond_changelink(struct net_device *bond_dev,
 		if (err)
 			return err;
 	}
+	if (data[IFLA_BOND_MIIMON]) {
+		miimon = nla_get_u32(data[IFLA_BOND_MIIMON]);
+
+		err = bond_option_miimon_set(bond, miimon);
+		if (err)
+			return err;
+	}
+	if (data[IFLA_BOND_UPDELAY]) {
+		int updelay = nla_get_u32(data[IFLA_BOND_UPDELAY]);
+
+		err = bond_option_updelay_set(bond, updelay);
+		if (err)
+			return err;
+	}
+	if (data[IFLA_BOND_DOWNDELAY]) {
+		int downdelay = nla_get_u32(data[IFLA_BOND_DOWNDELAY]);
+
+		err = bond_option_downdelay_set(bond, downdelay);
+		if (err)
+			return err;
+	}
+	if (data[IFLA_BOND_USE_CARRIER]) {
+		int use_carrier = nla_get_u8(data[IFLA_BOND_USE_CARRIER]);
+
+		err = bond_option_use_carrier_set(bond, use_carrier);
+		if (err)
+			return err;
+	}
+	if (data[IFLA_BOND_ARP_INTERVAL]) {
+		int arp_interval = nla_get_u32(data[IFLA_BOND_ARP_INTERVAL]);
+
+		if (arp_interval && miimon) {
+			pr_err("%s: ARP monitoring cannot be used with MII monitoring.\n",
+			       bond->dev->name);
+			return -EINVAL;
+		}
+
+		err = bond_option_arp_interval_set(bond, arp_interval);
+		if (err)
+			return err;
+	}
+	if (data[IFLA_BOND_ARP_IP_TARGET]) {
+		__be32 targets[BOND_MAX_ARP_TARGETS] = { 0, };
+		struct nlattr *attr;
+		int i = 0, rem;
+
+		nla_for_each_nested(attr, data[IFLA_BOND_ARP_IP_TARGET], rem) {
+			__be32 target = nla_get_u32(attr);
+			targets[i++] = target;
+		}
+
+		err = bond_option_arp_ip_targets_set(bond, targets, i);
+		if (err)
+			return err;
+	}
+	if (data[IFLA_BOND_ARP_VALIDATE]) {
+		int arp_validate = nla_get_u32(data[IFLA_BOND_ARP_VALIDATE]);
+
+		if (arp_validate && miimon) {
+			pr_err("%s: ARP validating cannot be used with MII monitoring.\n",
+			       bond->dev->name);
+			return -EINVAL;
+		}
+
+		err = bond_option_arp_validate_set(bond, arp_validate);
+		if (err)
+			return err;
+	}
+	if (data[IFLA_BOND_ARP_ALL_TARGETS]) {
+		int arp_all_targets =
+			nla_get_u32(data[IFLA_BOND_ARP_ALL_TARGETS]);
+
+		err = bond_option_arp_all_targets_set(bond, arp_all_targets);
+		if (err)
+			return err;
+	}
 	return 0;
 }
 
@@ -83,7 +172,17 @@ static int bond_newlink(struct net *src_net, struct net_device *bond_dev,
 static size_t bond_get_size(const struct net_device *bond_dev)
 {
 	return nla_total_size(sizeof(u8)) +	/* IFLA_BOND_MODE */
-		nla_total_size(sizeof(u32));	/* IFLA_BOND_ACTIVE_SLAVE */
+		nla_total_size(sizeof(u32)) +	/* IFLA_BOND_ACTIVE_SLAVE */
+		nla_total_size(sizeof(u32)) +	/* IFLA_BOND_MIIMON */
+		nla_total_size(sizeof(u32)) +	/* IFLA_BOND_UPDELAY */
+		nla_total_size(sizeof(u32)) +	/* IFLA_BOND_DOWNDELAY */
+		nla_total_size(sizeof(u8)) +	/* IFLA_BOND_USE_CARRIER */
+		nla_total_size(sizeof(u32)) +	/* IFLA_BOND_ARP_INTERVAL */
+						/* IFLA_BOND_ARP_IP_TARGET */
+		nla_total_size(sizeof(u32)) * BOND_MAX_ARP_TARGETS +
+		nla_total_size(sizeof(u32)) +	/* IFLA_BOND_ARP_VALIDATE */
+		nla_total_size(sizeof(u32)) +	/* IFLA_BOND_ARP_ALL_TARGETS */
+		0;
 }
 
 static int bond_fill_info(struct sk_buff *skb,
@@ -91,11 +190,57 @@ static int bond_fill_info(struct sk_buff *skb,
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 	struct net_device *slave_dev = bond_option_active_slave_get(bond);
+	struct nlattr *targets;
+	int i, targets_added;
+
+	if (nla_put_u8(skb, IFLA_BOND_MODE, bond->params.mode))
+		goto nla_put_failure;
+
+	if (slave_dev &&
+	    nla_put_u32(skb, IFLA_BOND_ACTIVE_SLAVE, slave_dev->ifindex))
+		goto nla_put_failure;
+
+	if (nla_put_u32(skb, IFLA_BOND_MIIMON, bond->params.miimon))
+		goto nla_put_failure;
+
+	if (nla_put_u32(skb, IFLA_BOND_UPDELAY,
+			bond->params.updelay * bond->params.miimon))
+		goto nla_put_failure;
+
+	if (nla_put_u32(skb, IFLA_BOND_DOWNDELAY,
+			bond->params.downdelay * bond->params.miimon))
+		goto nla_put_failure;
+
+	if (nla_put_u8(skb, IFLA_BOND_USE_CARRIER, bond->params.use_carrier))
+		goto nla_put_failure;
+
+	if (nla_put_u32(skb, IFLA_BOND_ARP_INTERVAL, bond->params.arp_interval))
+		goto nla_put_failure;
+
+	targets = nla_nest_start(skb, IFLA_BOND_ARP_IP_TARGET);
+	if (!targets)
+		goto nla_put_failure;
+
+	targets_added = 0;
+	for (i = 0; i < BOND_MAX_ARP_TARGETS; i++) {
+		if (bond->params.arp_targets[i]) {
+			nla_put_u32(skb, i, bond->params.arp_targets[i]);
+			targets_added = 1;
+		}
+	}
 
-	if (nla_put_u8(skb, IFLA_BOND_MODE, bond->params.mode) ||
-	    (slave_dev &&
-	     nla_put_u32(skb, IFLA_BOND_ACTIVE_SLAVE, slave_dev->ifindex)))
+	if (targets_added)
+		nla_nest_end(skb, targets);
+	else
+		nla_nest_cancel(skb, targets);
+
+	if (nla_put_u32(skb, IFLA_BOND_ARP_VALIDATE, bond->params.arp_validate))
+		goto nla_put_failure;
+
+	if (nla_put_u32(skb, IFLA_BOND_ARP_ALL_TARGETS,
+			bond->params.arp_all_targets))
 		goto nla_put_failure;
+
 	return 0;
 
 nla_put_failure:

drivers/net/bonding/bond_options.c

@@ -1,6 +1,7 @@
 /*
  * drivers/net/bond/bond_options.c - bonding options
  * Copyright (c) 2013 Jiri Pirko <jiri@resnulli.us>
+ * Copyright (c) 2013 Scott Feldman <sfeldma@cumulusnetworks.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -145,3 +146,326 @@ int bond_option_active_slave_set(struct bonding *bond,
 	unblock_netpoll_tx();
 	return ret;
 }
+
+int bond_option_miimon_set(struct bonding *bond, int miimon)
+{
+	if (miimon < 0) {
+		pr_err("%s: Invalid miimon value %d not in range %d-%d; rejected.\n",
+		       bond->dev->name, miimon, 0, INT_MAX);
+		return -EINVAL;
+	}
+	pr_info("%s: Setting MII monitoring interval to %d.\n",
+		bond->dev->name, miimon);
+	bond->params.miimon = miimon;
+	if (bond->params.updelay)
+		pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
+			bond->dev->name,
+			bond->params.updelay * bond->params.miimon);
+	if (bond->params.downdelay)
+		pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
+			bond->dev->name,
+			bond->params.downdelay * bond->params.miimon);
+	if (miimon && bond->params.arp_interval) {
+		pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
+			bond->dev->name);
+		bond->params.arp_interval = 0;
+		if (bond->params.arp_validate)
+			bond->params.arp_validate = BOND_ARP_VALIDATE_NONE;
+	}
+	if (bond->dev->flags & IFF_UP) {
+		/* If the interface is up, we may need to fire off
+		 * the MII timer. If the interface is down, the
+		 * timer will get fired off when the open function
+		 * is called.
+		 */
+		if (!miimon) {
+			cancel_delayed_work_sync(&bond->mii_work);
+		} else {
+			cancel_delayed_work_sync(&bond->arp_work);
+			queue_delayed_work(bond->wq, &bond->mii_work, 0);
+		}
+	}
+	return 0;
+}
+
+int bond_option_updelay_set(struct bonding *bond, int updelay)
+{
+	if (!(bond->params.miimon)) {
+		pr_err("%s: Unable to set up delay as MII monitoring is disabled\n",
+		       bond->dev->name);
+		return -EPERM;
+	}
+
+	if (updelay < 0) {
+		pr_err("%s: Invalid up delay value %d not in range %d-%d; rejected.\n",
+		       bond->dev->name, updelay, 0, INT_MAX);
+		return -EINVAL;
+	} else {
+		if ((updelay % bond->params.miimon) != 0) {
+			pr_warn("%s: Warning: up delay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
+				bond->dev->name, updelay,
+				bond->params.miimon,
+				(updelay / bond->params.miimon) *
+				bond->params.miimon);
+		}
+		bond->params.updelay = updelay / bond->params.miimon;
+		pr_info("%s: Setting up delay to %d.\n",
+			bond->dev->name,
+			bond->params.updelay * bond->params.miimon);
+	}
+
+	return 0;
+}
+
+int bond_option_downdelay_set(struct bonding *bond, int downdelay)
+{
+	if (!(bond->params.miimon)) {
+		pr_err("%s: Unable to set down delay as MII monitoring is disabled\n",
+		       bond->dev->name);
+		return -EPERM;
+	}
+
+	if (downdelay < 0) {
+		pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
+		       bond->dev->name, downdelay, 0, INT_MAX);
+		return -EINVAL;
+	} else {
+		if ((downdelay % bond->params.miimon) != 0) {
+			pr_warn("%s: Warning: down delay (%d) is not a multiple of miimon (%d), delay rounded to %d ms\n",
+				bond->dev->name, downdelay,
+				bond->params.miimon,
+				(downdelay / bond->params.miimon) *
+				bond->params.miimon);
+		}
+		bond->params.downdelay = downdelay / bond->params.miimon;
+		pr_info("%s: Setting down delay to %d.\n",
+			bond->dev->name,
+			bond->params.downdelay * bond->params.miimon);
+	}
+
+	return 0;
+}
+
+int bond_option_use_carrier_set(struct bonding *bond, int use_carrier)
+{
+	if ((use_carrier == 0) || (use_carrier == 1)) {
+		bond->params.use_carrier = use_carrier;
+		pr_info("%s: Setting use_carrier to %d.\n",
+			bond->dev->name, use_carrier);
+	} else {
+		pr_info("%s: Ignoring invalid use_carrier value %d.\n",
+			bond->dev->name, use_carrier);
+	}
+
+	return 0;
+}
+
+int bond_option_arp_interval_set(struct bonding *bond, int arp_interval)
+{
+	if (arp_interval < 0) {
+		pr_err("%s: Invalid arp_interval value %d not in range 0-%d; rejected.\n",
+		       bond->dev->name, arp_interval, INT_MAX);
+		return -EINVAL;
+	}
+	if (BOND_NO_USES_ARP(bond->params.mode)) {
+		pr_info("%s: ARP monitoring cannot be used with ALB/TLB/802.3ad. Only MII monitoring is supported on %s.\n",
+			bond->dev->name, bond->dev->name);
+		return -EINVAL;
+	}
+	pr_info("%s: Setting ARP monitoring interval to %d.\n",
+		bond->dev->name, arp_interval);
+	bond->params.arp_interval = arp_interval;
+	if (arp_interval) {
+		if (bond->params.miimon) {
+			pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
+				bond->dev->name, bond->dev->name);
+			bond->params.miimon = 0;
+		}
+		if (!bond->params.arp_targets[0])
+			pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
+				bond->dev->name);
+	}
+	if (bond->dev->flags & IFF_UP) {
+		/* If the interface is up, we may need to fire off
+		 * the ARP timer.  If the interface is down, the
+		 * timer will get fired off when the open function
+		 * is called.
+		 */
+		if (!arp_interval) {
+			if (bond->params.arp_validate)
+				bond->recv_probe = NULL;
+			cancel_delayed_work_sync(&bond->arp_work);
+		} else {
+			/* arp_validate can be set only in active-backup mode */
+			if (bond->params.arp_validate)
+				bond->recv_probe = bond_arp_rcv;
+			cancel_delayed_work_sync(&bond->mii_work);
+			queue_delayed_work(bond->wq, &bond->arp_work, 0);
+		}
+	}
+
+	return 0;
+}
+
+static void _bond_options_arp_ip_target_set(struct bonding *bond, int slot,
+					    __be32 target,
+					    unsigned long last_rx)
+{
+	__be32 *targets = bond->params.arp_targets;
+	struct list_head *iter;
+	struct slave *slave;
+
+	if (slot >= 0 && slot < BOND_MAX_ARP_TARGETS) {
+		bond_for_each_slave(bond, slave, iter)
+			slave->target_last_arp_rx[slot] = last_rx;
+		targets[slot] = target;
+	}
+}
+
+static int _bond_option_arp_ip_target_add(struct bonding *bond, __be32 target)
+{
+	__be32 *targets = bond->params.arp_targets;
+	int ind;
+
+	if (IS_IP_TARGET_UNUSABLE_ADDRESS(target)) {
+		pr_err("%s: invalid ARP target %pI4 specified for addition\n",
+		       bond->dev->name, &target);
+		return -EINVAL;
+	}
+
+	if (bond_get_targets_ip(targets, target) != -1) { /* dup */
+		pr_err("%s: ARP target %pI4 is already present\n",
+		       bond->dev->name, &target);
+		return -EINVAL;
+	}
+
+	ind = bond_get_targets_ip(targets, 0); /* first free slot */
+	if (ind == -1) {
+		pr_err("%s: ARP target table is full!\n",
+		       bond->dev->name);
+		return -EINVAL;
+	}
+
+	pr_info("%s: adding ARP target %pI4.\n", bond->dev->name, &target);
+
+	_bond_options_arp_ip_target_set(bond, ind, target, jiffies);
+
+	return 0;
+}
+
+int bond_option_arp_ip_target_add(struct bonding *bond, __be32 target)
+{
+	int ret;
+
+	/* not to race with bond_arp_rcv */
+	write_lock_bh(&bond->lock);
+	ret = _bond_option_arp_ip_target_add(bond, target);
+	write_unlock_bh(&bond->lock);
+
+	return ret;
+}
+
+int bond_option_arp_ip_target_rem(struct bonding *bond, __be32 target)
+{
+	__be32 *targets = bond->params.arp_targets;
+	struct list_head *iter;
+	struct slave *slave;
+	unsigned long *targets_rx;
+	int ind, i;
+
+	if (IS_IP_TARGET_UNUSABLE_ADDRESS(target)) {
+		pr_err("%s: invalid ARP target %pI4 specified for removal\n",
+		       bond->dev->name, &target);
+		return -EINVAL;
+	}
+
+	ind = bond_get_targets_ip(targets, target);
+	if (ind == -1) {
+		pr_err("%s: unable to remove nonexistent ARP target %pI4.\n",
+		       bond->dev->name, &target);
+		return -EINVAL;
+	}
+
+	if (ind == 0 && !targets[1] && bond->params.arp_interval)
+		pr_warn("%s: removing last arp target with arp_interval on\n",
+			bond->dev->name);
+
+	pr_info("%s: removing ARP target %pI4.\n", bond->dev->name,
+		&target);
+
+	/* not to race with bond_arp_rcv */
+	write_lock_bh(&bond->lock);
+
+	bond_for_each_slave(bond, slave, iter) {
+		targets_rx = slave->target_last_arp_rx;
+		for (i = ind; (i < BOND_MAX_ARP_TARGETS-1) && targets[i+1]; i++)
+			targets_rx[i] = targets_rx[i+1];
+		targets_rx[i] = 0;
+	}
+	for (i = ind; (i < BOND_MAX_ARP_TARGETS-1) && targets[i+1]; i++)
+		targets[i] = targets[i+1];
+	targets[i] = 0;
+
+	write_unlock_bh(&bond->lock);
+
+	return 0;
+}
+
+int bond_option_arp_ip_targets_set(struct bonding *bond, __be32 *targets,
+				   int count)
+{
+	int i, ret = 0;
+
+	/* not to race with bond_arp_rcv */
+	write_lock_bh(&bond->lock);
+
+	/* clear table */
+	for (i = 0; i < BOND_MAX_ARP_TARGETS; i++)
+		_bond_options_arp_ip_target_set(bond, i, 0, 0);
+
+	if (count == 0 && bond->params.arp_interval)
+		pr_warn("%s: removing last arp target with arp_interval on\n",
+			bond->dev->name);
+
+	for (i = 0; i < count; i++) {
+		ret = _bond_option_arp_ip_target_add(bond, targets[i]);
+		if (ret)
+			break;
+	}
+
+	write_unlock_bh(&bond->lock);
+	return ret;
+}
+
+int bond_option_arp_validate_set(struct bonding *bond, int arp_validate)
+{
+	if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
+		pr_err("%s: arp_validate only supported in active-backup mode.\n",
+		       bond->dev->name);
+		return -EINVAL;
+	}
+	pr_info("%s: setting arp_validate to %s (%d).\n",
+		bond->dev->name, arp_validate_tbl[arp_validate].modename,
+		arp_validate);
+
+	if (bond->dev->flags & IFF_UP) {
+		if (!arp_validate)
+			bond->recv_probe = NULL;
+		else if (bond->params.arp_interval)
+			bond->recv_probe = bond_arp_rcv;
+	}
+	bond->params.arp_validate = arp_validate;
+
+	return 0;
+}
+
+int bond_option_arp_all_targets_set(struct bonding *bond, int arp_all_targets)
+{
+	pr_info("%s: setting arp_all_targets to %s (%d).\n",
+		bond->dev->name, arp_all_targets_tbl[arp_all_targets].modename,
+		arp_all_targets);
+
+	bond->params.arp_all_targets = arp_all_targets;
+
+	return 0;
+}

drivers/net/bonding/bond_sysfs.c

@@ -358,35 +358,21 @@ static ssize_t bonding_store_arp_validate(struct device *d,
 					  const char *buf, size_t count)
 {
 	struct bonding *bond = to_bond(d);
-	int new_value, ret = count;
+	int new_value, ret;
 
-	if (!rtnl_trylock())
-		return restart_syscall();
 	new_value = bond_parse_parm(buf, arp_validate_tbl);
 	if (new_value < 0) {
 		pr_err("%s: Ignoring invalid arp_validate value %s\n",
 		       bond->dev->name, buf);
-		ret = -EINVAL;
-		goto out;
-	}
-	if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
-		pr_err("%s: arp_validate only supported in active-backup mode.\n",
-		       bond->dev->name);
-		ret = -EINVAL;
-		goto out;
+		return -EINVAL;
 	}
-	pr_info("%s: setting arp_validate to %s (%d).\n",
-		bond->dev->name, arp_validate_tbl[new_value].modename,
-		new_value);
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	ret = bond_option_arp_validate_set(bond, new_value);
+	if (!ret)
+		ret = count;
 
-	if (bond->dev->flags & IFF_UP) {
-		if (!new_value)
-			bond->recv_probe = NULL;
-		else if (bond->params.arp_interval)
-			bond->recv_probe = bond_arp_rcv;
-	}
-	bond->params.arp_validate = new_value;
-out:
 	rtnl_unlock();
 
 	return ret;
@@ -413,7 +399,7 @@ static ssize_t bonding_store_arp_all_targets(struct device *d,
 					  const char *buf, size_t count)
 {
 	struct bonding *bond = to_bond(d);
-	int new_value;
+	int new_value, ret;
 
 	new_value = bond_parse_parm(buf, arp_all_targets_tbl);
 	if (new_value < 0) {
@@ -421,13 +407,17 @@ static ssize_t bonding_store_arp_all_targets(struct device *d,
 		       bond->dev->name, buf);
 		return -EINVAL;
 	}
-	pr_info("%s: setting arp_all_targets to %s (%d).\n",
-		bond->dev->name, arp_all_targets_tbl[new_value].modename,
-		new_value);
 
-	bond->params.arp_all_targets = new_value;
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	ret = bond_option_arp_all_targets_set(bond, new_value);
+	if (!ret)
+		ret = count;
+
+	rtnl_unlock();
 
-	return count;
+	return ret;
 }
 
 static DEVICE_ATTR(arp_all_targets, S_IRUGO | S_IWUSR,
@@ -506,60 +496,21 @@ static ssize_t bonding_store_arp_interval(struct device *d,
 					  const char *buf, size_t count)
 {
 	struct bonding *bond = to_bond(d);
-	int new_value, ret = count;
+	int new_value, ret;
 
-	if (!rtnl_trylock())
-		return restart_syscall();
 	if (sscanf(buf, "%d", &new_value) != 1) {
 		pr_err("%s: no arp_interval value specified.\n",
-		       bond->dev->name);
-		ret = -EINVAL;
-		goto out;
-	}
-	if (new_value < 0) {
-		pr_err("%s: Invalid arp_interval value %d not in range 0-%d; rejected.\n",
-		       bond->dev->name, new_value, INT_MAX);
-		ret = -EINVAL;
-		goto out;
-	}
-	if (BOND_NO_USES_ARP(bond->params.mode)) {
-		pr_info("%s: ARP monitoring cannot be used with ALB/TLB/802.3ad. Only MII monitoring is supported on %s.\n",
-			bond->dev->name, bond->dev->name);
-		ret = -EINVAL;
-		goto out;
-	}
-	pr_info("%s: Setting ARP monitoring interval to %d.\n",
-		bond->dev->name, new_value);
-	bond->params.arp_interval = new_value;
-	if (new_value) {
-		if (bond->params.miimon) {
-			pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
-				bond->dev->name, bond->dev->name);
-			bond->params.miimon = 0;
-		}
-		if (!bond->params.arp_targets[0])
-			pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
-				bond->dev->name);
-	}
-	if (bond->dev->flags & IFF_UP) {
-		/* If the interface is up, we may need to fire off
-		 * the ARP timer.  If the interface is down, the
-		 * timer will get fired off when the open function
-		 * is called.
-		 */
-		if (!new_value) {
-			if (bond->params.arp_validate)
-				bond->recv_probe = NULL;
-			cancel_delayed_work_sync(&bond->arp_work);
-		} else {
-			/* arp_validate can be set only in active-backup mode */
-			if (bond->params.arp_validate)
-				bond->recv_probe = bond_arp_rcv;
-			cancel_delayed_work_sync(&bond->mii_work);
-			queue_delayed_work(bond->wq, &bond->arp_work, 0);
-		}
+		bond->dev->name);
+		return -EINVAL;
 	}
-out:
+
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	ret = bond_option_arp_interval_set(bond, new_value);
+	if (!ret)
+		ret = count;
+
 	rtnl_unlock();
 	return ret;
 }
@@ -591,81 +542,29 @@ static ssize_t bonding_store_arp_targets(struct device *d,
 					 const char *buf, size_t count)
 {
 	struct bonding *bond = to_bond(d);
-	struct list_head *iter;
-	struct slave *slave;
-	__be32 newtarget, *targets;
-	unsigned long *targets_rx;
-	int ind, i, j, ret = -EINVAL;
-
-	if (!rtnl_trylock())
-		return restart_syscall();
+	__be32 target;
+	int ret = -EPERM;
 
-	targets = bond->params.arp_targets;
-	if (!in4_pton(buf + 1, -1, (u8 *)&newtarget, -1, NULL) ||
-	    IS_IP_TARGET_UNUSABLE_ADDRESS(newtarget)) {
-		pr_err("%s: invalid ARP target %pI4 specified for addition\n",
-		       bond->dev->name, &newtarget);
-		goto out;
+	if (!in4_pton(buf + 1, -1, (u8 *)&target, -1, NULL)) {
+		pr_err("%s: invalid ARP target %pI4 specified\n",
+		       bond->dev->name, &target);
+		return -EPERM;
 	}
-	/* look for adds */
-	if (buf[0] == '+') {
-		if (bond_get_targets_ip(targets, newtarget) != -1) { /* dup */
-			pr_err("%s: ARP target %pI4 is already present\n",
-			       bond->dev->name, &newtarget);
-			goto out;
-		}
 
-		ind = bond_get_targets_ip(targets, 0); /* first free slot */
-		if (ind == -1) {
-			pr_err("%s: ARP target table is full!\n",
-			       bond->dev->name);
-			goto out;
-		}
-
-		pr_info("%s: adding ARP target %pI4.\n", bond->dev->name,
-			 &newtarget);
-		/* not to race with bond_arp_rcv */
-		write_lock_bh(&bond->lock);
-		bond_for_each_slave(bond, slave, iter)
-			slave->target_last_arp_rx[ind] = jiffies;
-		targets[ind] = newtarget;
-		write_unlock_bh(&bond->lock);
-	} else if (buf[0] == '-')	{
-		ind = bond_get_targets_ip(targets, newtarget);
-		if (ind == -1) {
-			pr_err("%s: unable to remove nonexistent ARP target %pI4.\n",
-				bond->dev->name, &newtarget);
-			goto out;
-		}
-
-		if (ind == 0 && !targets[1] && bond->params.arp_interval)
-			pr_warn("%s: removing last arp target with arp_interval on\n",
-				bond->dev->name);
-
-		pr_info("%s: removing ARP target %pI4.\n", bond->dev->name,
-			&newtarget);
+	if (!rtnl_trylock())
+		return restart_syscall();
 
-		write_lock_bh(&bond->lock);
-		bond_for_each_slave(bond, slave, iter) {
-			targets_rx = slave->target_last_arp_rx;
-			j = ind;
-			for (; (j < BOND_MAX_ARP_TARGETS-1) && targets[j+1]; j++)
-				targets_rx[j] = targets_rx[j+1];
-			targets_rx[j] = 0;
-		}
-		for (i = ind; (i < BOND_MAX_ARP_TARGETS-1) && targets[i+1]; i++)
-			targets[i] = targets[i+1];
-		targets[i] = 0;
-		write_unlock_bh(&bond->lock);
-	} else {
+	if (buf[0] == '+')
+		ret = bond_option_arp_ip_target_add(bond, target);
+	else if (buf[0] == '-')
+		ret = bond_option_arp_ip_target_rem(bond, target);
+	else
 		pr_err("no command found in arp_ip_targets file for bond %s. Use +<addr> or -<addr>.\n",
 		       bond->dev->name);
-		ret = -EPERM;
-		goto out;
-	}
 
-	ret = count;
-out:
+	if (!ret)
+		ret = count;
+
 	rtnl_unlock();
 	return ret;
 }
@@ -689,44 +588,21 @@ static ssize_t bonding_store_downdelay(struct device *d,
 				       struct device_attribute *attr,
 				       const char *buf, size_t count)
 {
-	int new_value, ret = count;
+	int new_value, ret;
 	struct bonding *bond = to_bond(d);
 
-	if (!rtnl_trylock())
-		return restart_syscall();
-	if (!(bond->params.miimon)) {
-		pr_err("%s: Unable to set down delay as MII monitoring is disabled\n",
-		       bond->dev->name);
-		ret = -EPERM;
-		goto out;
-	}
-
 	if (sscanf(buf, "%d", &new_value) != 1) {
 		pr_err("%s: no down delay value specified.\n", bond->dev->name);
-		ret = -EINVAL;
-		goto out;
+		return -EINVAL;
 	}
-	if (new_value < 0) {
-		pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
-		       bond->dev->name, new_value, 0, INT_MAX);
-		ret = -EINVAL;
-		goto out;
-	} else {
-		if ((new_value % bond->params.miimon) != 0) {
-			pr_warning("%s: Warning: down delay (%d) is not a multiple of miimon (%d), delay rounded to %d ms\n",
-				   bond->dev->name, new_value,
-				   bond->params.miimon,
-				   (new_value / bond->params.miimon) *
-				   bond->params.miimon);
-		}
-		bond->params.downdelay = new_value / bond->params.miimon;
-		pr_info("%s: Setting down delay to %d.\n",
-			bond->dev->name,
-			bond->params.downdelay * bond->params.miimon);
 
-	}
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	ret = bond_option_downdelay_set(bond, new_value);
+	if (!ret)
+		ret = count;
 
-out:
 	rtnl_unlock();
 	return ret;
 }
@@ -747,44 +623,22 @@ static ssize_t bonding_store_updelay(struct device *d,
 				     struct device_attribute *attr,
 				     const char *buf, size_t count)
 {
-	int new_value, ret = count;
+	int new_value, ret;
 	struct bonding *bond = to_bond(d);
 
-	if (!rtnl_trylock())
-		return restart_syscall();
-	if (!(bond->params.miimon)) {
-		pr_err("%s: Unable to set up delay as MII monitoring is disabled\n",
-		       bond->dev->name);
-		ret = -EPERM;
-		goto out;
-	}
-
 	if (sscanf(buf, "%d", &new_value) != 1) {
 		pr_err("%s: no up delay value specified.\n",
-		       bond->dev->name);
-		ret = -EINVAL;
-		goto out;
-	}
-	if (new_value < 0) {
-		pr_err("%s: Invalid up delay value %d not in range %d-%d; rejected.\n",
-		       bond->dev->name, new_value, 0, INT_MAX);
-		ret = -EINVAL;
-		goto out;
-	} else {
-		if ((new_value % bond->params.miimon) != 0) {
-			pr_warning("%s: Warning: up delay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
-				   bond->dev->name, new_value,
-				   bond->params.miimon,
-				   (new_value / bond->params.miimon) *
-				   bond->params.miimon);
-		}
-		bond->params.updelay = new_value / bond->params.miimon;
-		pr_info("%s: Setting up delay to %d.\n",
-			bond->dev->name,
-			bond->params.updelay * bond->params.miimon);
+		bond->dev->name);
+		return -EINVAL;
 	}
 
-out:
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	ret = bond_option_updelay_set(bond, new_value);
+	if (!ret)
+		ret = count;
+
 	rtnl_unlock();
 	return ret;
 }
@@ -970,55 +824,22 @@ static ssize_t bonding_store_miimon(struct device *d,
 				    struct device_attribute *attr,
 				    const char *buf, size_t count)
 {
-	int new_value, ret = count;
+	int new_value, ret;
 	struct bonding *bond = to_bond(d);
 
-	if (!rtnl_trylock())
-		return restart_syscall();
 	if (sscanf(buf, "%d", &new_value) != 1) {
 		pr_err("%s: no miimon value specified.\n",
 		       bond->dev->name);
-		ret = -EINVAL;
-		goto out;
-	}
-	if (new_value < 0) {
-		pr_err("%s: Invalid miimon value %d not in range %d-%d; rejected.\n",
-		       bond->dev->name, new_value, 0, INT_MAX);
-		ret = -EINVAL;
-		goto out;
-	}
-	pr_info("%s: Setting MII monitoring interval to %d.\n",
-		bond->dev->name, new_value);
-	bond->params.miimon = new_value;
-	if (bond->params.updelay)
-		pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
-			bond->dev->name,
-			bond->params.updelay * bond->params.miimon);
-	if (bond->params.downdelay)
-		pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
-			bond->dev->name,
-			bond->params.downdelay * bond->params.miimon);
-	if (new_value && bond->params.arp_interval) {
-		pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
-			bond->dev->name);
-		bond->params.arp_interval = 0;
-		if (bond->params.arp_validate)
-			bond->params.arp_validate = BOND_ARP_VALIDATE_NONE;
-	}
-	if (bond->dev->flags & IFF_UP) {
-		/* If the interface is up, we may need to fire off
-		 * the MII timer. If the interface is down, the
-		 * timer will get fired off when the open function
-		 * is called.
-		 */
-		if (!new_value) {
-			cancel_delayed_work_sync(&bond->mii_work);
-		} else {
-			cancel_delayed_work_sync(&bond->arp_work);
-			queue_delayed_work(bond->wq, &bond->mii_work, 0);
-		}
+		return -EINVAL;
 	}
-out:
+
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	ret = bond_option_miimon_set(bond, new_value);
+	if (!ret)
+		ret = count;
+
 	rtnl_unlock();
 	return ret;
 }
@@ -1175,25 +996,23 @@ static ssize_t bonding_store_carrier(struct device *d,
 				     struct device_attribute *attr,
 				     const char *buf, size_t count)
 {
-	int new_value, ret = count;
+	int new_value, ret;
 	struct bonding *bond = to_bond(d);
 
-
 	if (sscanf(buf, "%d", &new_value) != 1) {
 		pr_err("%s: no use_carrier value specified.\n",
 		       bond->dev->name);
-		ret = -EINVAL;
-		goto out;
-	}
-	if ((new_value == 0) || (new_value == 1)) {
-		bond->params.use_carrier = new_value;
-		pr_info("%s: Setting use_carrier to %d.\n",
-			bond->dev->name, new_value);
-	} else {
-		pr_info("%s: Ignoring invalid use_carrier value %d.\n",
-			bond->dev->name, new_value);
+		return -EINVAL;
 	}
-out:
+
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	ret = bond_option_use_carrier_set(bond, new_value);
+	if (!ret)
+		ret = count;
+
+	rtnl_unlock();
 	return ret;
 }
 static DEVICE_ATTR(use_carrier, S_IRUGO | S_IWUSR,

drivers/net/bonding/bonding.h

@@ -439,6 +439,17 @@ int bond_netlink_init(void);
 void bond_netlink_fini(void);
 int bond_option_mode_set(struct bonding *bond, int mode);
 int bond_option_active_slave_set(struct bonding *bond, struct net_device *slave_dev);
+int bond_option_miimon_set(struct bonding *bond, int miimon);
+int bond_option_updelay_set(struct bonding *bond, int updelay);
+int bond_option_downdelay_set(struct bonding *bond, int downdelay);
+int bond_option_use_carrier_set(struct bonding *bond, int use_carrier);
+int bond_option_arp_interval_set(struct bonding *bond, int arp_interval);
+int bond_option_arp_ip_targets_set(struct bonding *bond, __be32 *targets,
+				   int count);
+int bond_option_arp_ip_target_add(struct bonding *bond, __be32 target);
+int bond_option_arp_ip_target_rem(struct bonding *bond, __be32 target);
+int bond_option_arp_validate_set(struct bonding *bond, int arp_validate);
+int bond_option_arp_all_targets_set(struct bonding *bond, int arp_all_targets);
 struct net_device *bond_option_active_slave_get_rcu(struct bonding *bond);
 struct net_device *bond_option_active_slave_get(struct bonding *bond);
 

include/uapi/linux/if_link.h

@@ -331,6 +331,14 @@ enum {
 	IFLA_BOND_UNSPEC,
 	IFLA_BOND_MODE,
 	IFLA_BOND_ACTIVE_SLAVE,
+	IFLA_BOND_MIIMON,
+	IFLA_BOND_UPDELAY,
+	IFLA_BOND_DOWNDELAY,
+	IFLA_BOND_USE_CARRIER,
+	IFLA_BOND_ARP_INTERVAL,
+	IFLA_BOND_ARP_IP_TARGET,
+	IFLA_BOND_ARP_VALIDATE,
+	IFLA_BOND_ARP_ALL_TARGETS,
 	__IFLA_BOND_MAX,
 };