buildroot/board/orangepi/orangepi-pc2

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the Orangepi PC2. With the current configuration
it will bring-up the board, and allow access through the serial console.

Orangepi PC2 link:
http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-PC-2.html

Sunxi Wiki link:
https://linux-sunxi.org/Xunlong_Orange_Pi_PC_2

This configuration uses U-Boot mainline and kernel mainline.

How to build
============

$ make orangepi_pc2_defconfig
$ make

Note: you will need access to the internet to download the required
sources.

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sudo sync

Insert the micro SDcard in your Orangepi PC2 and power it up. The console
is on the serial line, 115200 8N1.