PUBLIC_REPOS/buildroot: Buildroot is a simple, efficient and easy-to-use tool to generate embedded Linux systems through cross-compilation. The documentation can be found in docs/manual. You can generate a text document with 'make manual-text' and read output/docs/manual/manual.text. Online documentation can be found at http://buildroot.org/docs.html @ 2017.02.x

Peter Korsgaard d87992892f minnowboard_max: defconfigs: bump linux kernel to 4.8.1		8 rokov pred
..
fs-overlay-graphical	36e83efc66 minnowboard-max: Start X on boot and run a few demos	9 rokov pred
genimage.cfg	54ec0e2a74 board/minnowboard: Rework to generate SD card image	9 rokov pred
grub-minnowboard-max.cfg	7bdbee2311 configs/minnowboard_max: bump kernel to 4.6.1	9 rokov pred
grub-minnowboard.cfg	5c084e9519 board/minnowboard: Unify Minnowboard and Minnowboard MAX boards	9 rokov pred
linux-3.8.config	6104cc4f10 board: add support for the MinnowBoard	11 rokov pred
linux-4.8.config	d87992892f minnowboard_max: defconfigs: bump linux kernel to 4.8.1	8 rokov pred
post-build.sh	707465da72 board/minnowboard/post-build.sh: only tweak /etc/inittab if available	9 rokov pred
post-image.sh	54ec0e2a74 board/minnowboard: Rework to generate SD card image	9 rokov pred
readme.txt	244ffaafd1 minnowboard-max: Enable serial and HDMI consoles	9 rokov pred

		
				readme.txt
			
				How to get started with the MinnowBoard (MAX)
=============================================

1. Build

  Apply the defconfig:

  $ make minnowboard_defconfig

  Or, for the Minnowboard MAX board:

  $ make minnowboard_max_defconfig

  Add any additional packages required and build:

  $ make

2. Write the SD card

  The build process will create a SD card image in output/images.
  Write the image to an mSD card, insert into the MinnowBoard
  and power the board on.

  $ dd if=output/images/sdcard.img of=/dev/mmcblk0; sync

  The system starts two consoles: one on the serial port
  and one on HDMI.

3. Enjoy

Additional information about this board can be found at
http://www.minnowboard.org/.