configs/orangepi: Changing Linux kernel to v4.5-rc1

[Peter: use tarball for Linux kernel, use 4.4 kernel headers]
Signed-off-by: Eelco Chaudron <echaudron@xiot.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/orangepi/orangepipc/post-image.sh

@@ -6,7 +6,13 @@ GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
 
 rm -rf "${GENIMAGE_TMP}"
 
-genimage                           \
+# As we now use the Linux v4.5-RC1 kernel no orangepi-pc dtb exists yet.
+# However the orangepi-plus dtb has not much content, only mmc0 and uart
+# which are equal to the pc version of the board, so we use it here.
+mv ${BINARIES_DIR}/sun8i-h3-orangepi-plus.dtb ${BINARIES_DIR}/sun8i-h3-orangepi-pc.dtb
+
+
+genimage                               \
 	--rootpath "${TARGET_DIR}"     \
 	--tmppath "${GENIMAGE_TMP}"    \
 	--inputpath "${BINARIES_DIR}"  \

board/orangepi/orangepipc/readme.txt

@@ -7,10 +7,6 @@ This default configuration will allow you to start experimenting with the
 buildroot environment for the OrangePi PC. With the current configuration
 it will bring-up the board, and allow access through the serial console.
 
-Unfortunately this boards processor is not yet supported by the
-mainline kernel, and therefore this default configuration is using a
-private Linux kernel repository based on 4.4-rc.
-
 How to build it
 ===============
 

configs/orangepipc_defconfig

@@ -2,28 +2,27 @@ BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_FPU_VFPV4=y
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.3.3"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
+BR2_DEFAULT_KERNEL_VERSION="4.4"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
 BR2_TARGET_GENERIC_HOSTNAME="OrangePi_PC"
 BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the Orange Pi PC"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/orangepipc/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/orangepi/orangepipc/post-image.sh"
 BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/jwrdegoede/linux-sunxi.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a516ac6dda21e6f5edceecd08b475b16e360656b"
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5-rc1"
 BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
 BR2_LINUX_KERNEL_ZIMAGE=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-orangepi-pc"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-orangepi-plus"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_pc"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_pc"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"