Merge branch 'next'

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/via/imx6_vab820/patches/uboot/default-to-boot-from-the-SD-card.patch

@@ -0,0 +1,25 @@
+From 6e72bef18c928753c9861c1f6fc8c2c4dd5d1e97 Mon Sep 17 00:00:00 2001
+From: Gergely Imreh <imrehg@gmail.com>
+Date: Thu, 30 Apr 2015 16:24:38 +0800
+Subject: [PATCH] default to boot from the SD card
+
+---
+ include/configs/mx6qvab820_common.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/include/configs/mx6qvab820_common.h b/include/configs/mx6qvab820_common.h
+index 99bc8a9..2e70c94 100644
+--- a/include/configs/mx6qvab820_common.h
++++ b/include/configs/mx6qvab820_common.h
+@@ -216,7 +216,7 @@
+ 	"bootcmd_mmc=setenv mmcdev 1; setenv rootdev 0; setenv mmcname mmc; run bootcmd_main;\0"
+ 
+ #define CONFIG_BOOTCOMMAND \
+-	"run bootcmd_mmc"
++	"run bootcmd_sd"
+ 
+ #define CONFIG_ARP_TIMEOUT     200UL
+ 
+-- 
+2.3.7
+

board/via/imx6_vab820/readme.txt

@@ -0,0 +1,107 @@
+VIA VAB-820/AMOS-820
+====================
+
+This file documents the Buildroot support for the VIA VAB-820 board and
+VIA AMOS-820 system, which are built around a Freescale i.MX6 Quad/Dual SoC.
+The kernel and u-boot is based on the official VIA BSP, which is in turn
+based on the Freescale Linux 3.10.17_1.0.0_ga BSP.
+
+
+Configuring and building Buildroot
+----------------------------------
+
+Start from the defconfig:
+
+  $ make via_imx6_vab820_defconfig
+
+You can edit build options the usual way:
+
+  $ make menuconfig
+
+When you are happy with the setup, run:
+
+  $ make
+
+The result of the build with the default settings should be these files:
+
+  output/images
+  ├── imx6q-vab820.dtb
+  ├── rootfs.tar
+  ├── u-boot.imx
+  └── uImage
+
+
+Set up your SD card
+-------------------
+
+*Important*: pay attention which partition you are modifying so you don't
+accidentally erase the wrong file system, e.g your host computer or your
+external storage!
+
+In the default setup you need to create 2 partitions on your SD card:
+a boot partition and a root partition. In this guide and in the default u-boot
+settings the boot partition is vfat, while the root partition is ext4.
+
+You also need to leave space for u-boot at the beginning of the card, before
+all the partitions.
+
+For example, if your SD card is at /dev/sdX, using fdisk, and starting from
+an empty card, the steps are along these lines:
+
+  # fdisk /dev/sdX
+  n         (new partition)
+  p         (primary partition)
+  1	    (first partition)
+  <return>  (default first sector, should be at least 1MB from the beginning
+             which is 2048 sectors if the sector size is 512KB)
+  +50M      (50MB size, as an example)
+  t         (switch partition type)
+  b         (select "W95 FAT32" type)
+  n         (the second partition)
+  p         (primary partition)
+  2	    (second partition)
+  <return>  (default first sector)
+  <return>  (use all remaining space)
+  p         (print so the partition looks something like this below)
+    Device     Boot  Start      End  Sectors  Size Id Type
+    /dev/sdX1         2048   104447   102400   50M  b W95 FAT32
+    /dev/sdX2       104448 15564799 15460352  7.4G 83 Linux
+  w         (save changes)
+
+After this you need to format the newly created file system:
+
+  # mkfs.vfat -L boot /dev/sdX1
+  # mkfs.ext4 -L rootfs /dev/sdX2
+
+Now the system can be copied onto the card. First copy the u-boot onto
+the region of the card before the first partition (starting from the
+root directory of buildroot):
+
+  # dd if=output/images/u-boot.imx of=/dev/sdX bs=512 seek=2
+
+Mount the first partition /dev/sdX1, and copy the kernel and the
+compiled device tree:
+
+  # cp output/images/uImage /mnt/<BOOT-PARTITION>
+  # cp output/images/imx6q-vab820.dtb /mnt/<BOOT-PARTITION>
+
+Finally, copy the root file system onto the mounted (empty) /dev/sdX2
+rootfs partition:
+
+  # tar xf output/images/rootfs.tar -C /mnt/<ROOTFS-PARTITION>
+
+
+Booting
+-------
+
+To use the on-card u-boot, you need adjust jumper J11 located just next to
+the SD card slot on the VAB-820 board. The correct position for SD card
+boot is jumping the two pins towards the inside of the board.
+
+To modify the default boot parameters compiled into u-boot, you can create
+a boot script with the file name `boot.scr` and place it onto the boot
+partition (same directory as `uImage`).
+
+If you want to have the login prompt on the serial debug line instead of
+the console, adjust the buildroot settings as:
+"System Configuration > getty options > TTY port > ttymxc1"

boot/barebox/Config.in

@@ -91,6 +91,12 @@ config BR2_TARGET_BAREBOX_CUSTOM_CONFIG_FILE
 	help
 	  Path to the barebox configuration file
 
+config BR2_TARGET_BAREBOX_CONFIG_FRAGMENT_FILES
+	string "Additional configuration fragment files"
+	help
+	  A space-separated list of configuration fragment files,
+	  that will be merged to the main Barebox configuration file.
+
 config BR2_TARGET_BAREBOX_BAREBOXENV
 	bool "bareboxenv tool in target"
 	help

boot/barebox/barebox.mk

@@ -64,6 +64,7 @@ BAREBOX_SOURCE_CONFIG = $(call qstrip,$(BR2_TARGET_BAREBOX_CUSTOM_CONFIG_FILE))
 endif
 
 BAREBOX_KCONFIG_FILE = $(BAREBOX_SOURCE_CONFIG)
+BAREBOX_KCONFIG_FRAGMENT_FILES = $(call qstrip,$(BR2_TARGET_BAREBOX_CONFIG_FRAGMENT_FILES))
 BAREBOX_KCONFIG_EDITORS = menuconfig xconfig gconfig nconfig
 BAREBOX_KCONFIG_OPTS = $(BAREBOX_MAKE_FLAGS)
 

configs/riotboard_defconfig

@@ -14,19 +14,19 @@ BR2_ROOTFS_OVERLAY="board/embest/riotboard/rootfs_overlay"
 
 # bootloader
 BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_VERSION="2015.01"
+BR2_TARGET_UBOOT_VERSION="2015.04"
 BR2_TARGET_UBOOT_BOARDNAME="riotboard"
 BR2_TARGET_UBOOT_FORMAT_IMX=y
 
 # kernel headers
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.19.3"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_19=y
+BR2_DEFAULT_KERNEL_VERSION="4.0"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_0=y
 
 # kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.19.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.0"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y

configs/via_imx6_vab820_defconfig

@@ -0,0 +1,31 @@
+# Architecture
+BR2_arm=y
+BR2_cortex_a9=y
+BR2_ARM_EABIHF=y
+BR2_ARM_FPU_VFPV3=y
+
+# Toolchain
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="3.10.17"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y
+BR2_GLOBAL_PATCH_DIR="board/via/imx6_vab820/patches"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://github.com/viaembedded/vab820-kernel-bsp.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="via_3.10.17_2.0.1"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
+BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
+BR2_LINUX_KERNEL_UIMAGE=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_USE_INTREE_DTS=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-vab820"
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mx6qvab820"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://github.com/viaembedded/vab820-uboot-bsp.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="via_3.10.17_2.0.1"
+BR2_TARGET_UBOOT_FORMAT_IMX=y

docs/manual/adding-packages-kconfig.txt

@@ -34,8 +34,14 @@ This snippet creates the following make targets:
 
 * +foo-menuconfig+, which calls the package's +menuconfig+ target
 
-* +foo-update-config+, which copies the configuration back to the source
-  configuration file.
+* +foo-update-config+, which copies the configuration back to the
+  source configuration file. It is not possible to use this target
+  when fragment files are set.
+
+* +foo-update-defconfig+, which copies the configuration back to the
+  source configuration file. The configuration file will only list the
+  options that differ from the default values. It is not possible to
+  use this target when fragment files are set.
 
 and ensures that the source configuration file is copied to the build
 directory at the right moment.
@@ -46,6 +52,11 @@ be set to suit the needs of the package under consideration:
 * +FOO_KCONFIG_EDITORS+: a space-separated list of kconfig editors to
   support, for example 'menuconfig xconfig'. By default, 'menuconfig'.
 
+* +FOO_KCONFIG_FRAGMENT_FILES+: a space-separated list of configuration
+  fragment files that are merged to the main configuration file.
+  Fragment files are typically used when there is a desire to stay in sync
+  with an upstream (def)config file, with some minor modifications.
+
 * +FOO_KCONFIG_OPTS+: extra options to pass when calling the kconfig
   editors. This may need to include '$(FOO_MAKE_OPTS)', for example. By
   default, empty.

linux/Config.in

@@ -164,6 +164,12 @@ config BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE
 	  Note: this can be a defconfig file or a complete .config file,
 	  which can later be saved back with make linux-update-(def)config.
 
+config BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES
+	string "Additional configuration fragment files"
+	help
+	  A space-separated list of kernel configuration fragment files,
+	  that will be merged to the main kernel configuration file.
+
 #
 # Binary format
 #

linux/linux.mk

@@ -182,6 +182,7 @@ KERNEL_SOURCE_CONFIG = $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE))
 endif
 
 LINUX_KCONFIG_FILE = $(KERNEL_SOURCE_CONFIG)
+LINUX_KCONFIG_FRAGMENT_FILES = $(call qstrip,$(BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES))
 LINUX_KCONFIG_EDITORS = menuconfig xconfig gconfig nconfig
 LINUX_KCONFIG_OPTS = $(LINUX_MAKE_FLAGS)
 

package/Config.in.host

@@ -7,6 +7,7 @@ menu "Host utilities"
 	source "package/dosfstools/Config.in.host"
 	source "package/e2fsprogs/Config.in.host"
 	source "package/e2tools/Config.in.host"
+	source "package/faketime/Config.in.host"
 	source "package/genext2fs/Config.in.host"
 	source "package/genimage/Config.in.host"
 	source "package/genpart/Config.in.host"

package/boost/0002-gcc.jam-compiler-options-fix.patch

@@ -0,0 +1,37 @@
+From a891e48ed0b647b7bf550ad1d179398b23d0726e Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?J=C3=B6rg=20Krause?= <joerg.krause@embedded.rocks>
+Date: Sat, 2 May 2015 13:47:54 +0200
+Subject: [PATCH] gcc.jam compiler options fix
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Only PowerPC, SPARC, and x86 do support the -m32 and -m64 compiler options [1].
+
+Rather then excluding all architectures not supporting these options as it is
+done in commit c0634341d9ee2c02d3a55c91dafb988afc066c49 [2], include all
+architectures that do support them.
+
+[1] https://gcc.gnu.org/onlinedocs/gcc/Option-Summary.html
+[2] https://github.com/boostorg/build/commit/c0634341d9ee2c02d3a55c91dafb988afc066c49
+
+Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
+---
+ src/tools/gcc.jam | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/tools/build/src/tools/gcc.jam b/tools/build/src/tools/gcc.jam
+index db04534..fbe8ab0 100644
+--- a/tools/build/src/tools/gcc.jam
++++ b/tools/build/src/tools/gcc.jam
+@@ -451,7 +451,7 @@ rule setup-address-model ( targets * : sources * : properties * )
+         else
+         {
+             local arch = [ feature.get-values architecture : $(properties) ] ;
+-            if $(arch) != arm
++            if $(arch) = power || $(arch) = sparc || $(arch) = x86
+             {
+                 if $(model) = 32
+                 {
+--
+2.3.7

package/boost/boost.hash

@@ -1,3 +1,3 @@
-# From http://sourceforge.net/projects/boost/files/boost/1.57.0/
-md5	1be49befbdd9a5ce9def2983ba3e7b76	boost_1_57_0.tar.bz2
-sha1	e151557ae47afd1b43dc3fac46f8b04a8fe51c12	boost_1_57_0.tar.bz2
+# From http://sourceforge.net/projects/boost/files/boost/1.58.0/
+md5	b8839650e61e9c1c0a89f371dd475546	boost_1_58_0.tar.bz2
+sha1	2fc96c1651ac6fe9859b678b165bd78dc211e881	boost_1_58_0.tar.bz2

package/boost/boost.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-BOOST_VERSION = 1.57.0
+BOOST_VERSION = 1.58.0
 BOOST_SOURCE = boost_$(subst .,_,$(BOOST_VERSION)).tar.bz2
 BOOST_SITE = http://downloads.sourceforge.net/project/boost/boost/$(BOOST_VERSION)
 BOOST_INSTALL_STAGING = YES

package/busybox/Config.in

@@ -20,6 +20,12 @@ config BR2_PACKAGE_BUSYBOX_CONFIG
 
 	  Most people will just use the default BusyBox configuration file.
 
+config BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES
+	string "Additional BusyBox configuration fragment files"
+	help
+	  A space-separated list of configuration fragment files,
+	  that will be merged to the main BusyBox configuration file.
+
 config BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
 	bool "Show packages that are also provided by busybox"
 	help

package/busybox/busybox.mk

@@ -46,6 +46,7 @@ ifndef BUSYBOX_CONFIG_FILE
 endif
 
 BUSYBOX_KCONFIG_FILE = $(BUSYBOX_CONFIG_FILE)
+BUSYBOX_KCONFIG_FRAGMENT_FILES = $(call qstrip,$(BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES))
 BUSYBOX_KCONFIG_EDITORS = menuconfig xconfig gconfig
 BUSYBOX_KCONFIG_OPTS = $(BUSYBOX_MAKE_OPTS)
 

package/e2fsprogs/0001-libext2fs-fix-potential-buffer-overflow-in-closefs.patch

@@ -1,59 +0,0 @@
-From 49d0fe2a14f2a23da2fe299643379b8c1d37df73 Mon Sep 17 00:00:00 2001
-From: Theodore Ts'o <tytso@mit.edu>
-Date: Fri, 6 Feb 2015 12:46:39 -0500
-Subject: [PATCH] libext2fs: fix potential buffer overflow in closefs()
-
-Upstream commit 49d0fe2a14f2.
-
-The bug fix in f66e6ce4446: "libext2fs: avoid buffer overflow if
-s_first_meta_bg is too big" had a typo in the fix for
-ext2fs_closefs().  In practice most of the security exposure was from
-the openfs path, since this meant if there was a carefully crafted
-file system, buffer overrun would be triggered when the file system was
-opened.
-
-However, if corrupted file system didn't trip over some corruption
-check, and then the file system was modified via tune2fs or debugfs,
-such that the superblock was marked dirty and then written out via the
-closefs() path, it's possible that the buffer overrun could be
-triggered when the file system is closed.
-
-Also clear up a signed vs unsigned warning while we're at it.
-
-Thanks to Nick Kralevich <nnk@google.com> for asking me to look at
-compiler warning in the code in question, which led me to notice the
-bug in f66e6ce4446.
-
-Addresses: CVE-2015-1572
-
-Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-Signed-off-by: Baruch Siach <baruch@tkos.co.il>
----
- lib/ext2fs/closefs.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/lib/ext2fs/closefs.c b/lib/ext2fs/closefs.c
-index 1f9911311a1a..ab5b2fb2365e 100644
---- a/lib/ext2fs/closefs.c
-+++ b/lib/ext2fs/closefs.c
-@@ -287,7 +287,7 @@ errcode_t ext2fs_flush2(ext2_filsys fs, int flags)
- 	dgrp_t		j;
- #endif
- 	char	*group_ptr;
--	int	old_desc_blocks;
-+	blk64_t	old_desc_blocks;
- 	struct ext2fs_numeric_progress_struct progress;
- 
- 	EXT2_CHECK_MAGIC(fs, EXT2_ET_MAGIC_EXT2FS_FILSYS);
-@@ -346,7 +346,7 @@ errcode_t ext2fs_flush2(ext2_filsys fs, int flags)
- 	group_ptr = (char *) group_shadow;
- 	if (fs->super->s_feature_incompat & EXT2_FEATURE_INCOMPAT_META_BG) {
- 		old_desc_blocks = fs->super->s_first_meta_bg;
--		if (old_desc_blocks > fs->super->s_first_meta_bg)
-+		if (old_desc_blocks > fs->desc_blocks)
- 			old_desc_blocks = fs->desc_blocks;
- 	} else
- 		old_desc_blocks = fs->desc_blocks;
--- 
-2.1.4
-

package/e2fsprogs/e2fsprogs.hash

@@ -1,2 +1,2 @@
-# From https://www.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/v1.42.12/sha256sums.asc
-sha256 6dadcd3b759195150d20154ab9d6516e3b3cbb35d66d461f55ae94a2854e7de8 e2fsprogs-1.42.12.tar.xz
+# From https://www.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/v1.42.13/sha256sums.asc
+sha256 e16474b5a3a30f9197160c4b91bd48d5a463583049c0fcc405b6f0f7075aa0c7 e2fsprogs-1.42.13.tar.xz

package/e2fsprogs/e2fsprogs.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-E2FSPROGS_VERSION = 1.42.12
+E2FSPROGS_VERSION = 1.42.13
 E2FSPROGS_SOURCE = e2fsprogs-$(E2FSPROGS_VERSION).tar.xz
 E2FSPROGS_SITE = $(BR2_KERNEL_MIRROR)/linux/kernel/people/tytso/e2fsprogs/v$(E2FSPROGS_VERSION)
 E2FSPROGS_LICENSE = GPLv2, libuuid BSD-3c, libss and libet MIT-like with advertising clause

package/faketime/Config.in.host

@@ -0,0 +1,7 @@
+config BR2_PACKAGE_HOST_FAKETIME
+	bool "host faketime"
+	help
+	  Faketime reports faked system time to programs without
+	  having to change the system-wide time.
+
+	  https://github.com/wolfcw/libfaketime

package/faketime/faketime.mk

@@ -0,0 +1,20 @@
+################################################################################
+#
+# libfaketime
+#
+################################################################################
+
+FAKETIME_VERSION = v0.9.6
+FAKETIME_SITE = $(call github,wolfcw,libfaketime,$(FAKETIME_VERSION))
+FAKETIME_LICENSE = GPLv2
+FAKETIME_LICENSE_FILES = COPYING
+
+define HOST_FAKETIME_BUILD_CMDS
+	$(HOST_CONFIGURE_OPTS) $(MAKE) -C $(@D) PREFIX=$(HOST_DIR)/usr
+endef
+
+define HOST_FAKETIME_INSTALL_CMDS
+	$(HOST_CONFIGURE_OPTS) $(MAKE) -C $(@D) PREFIX=$(HOST_DIR)/usr install
+endef
+
+$(eval $(host-generic-package))

package/flashrom/Config.in

@@ -1,11 +1,24 @@
 config BR2_PACKAGE_FLASHROM
 	bool "flashrom"
 	select BR2_PACKAGE_PCIUTILS
+	select BR2_PACKAGE_LIBUSB
+	select BR2_PACKAGE_LIBUSB_COMPAT
+	select BR2_PACKAGE_LIBFTDI
 	# dmidecode is only a runtime dependency
 	select BR2_PACKAGE_DMIDECODE
 	depends on BR2_i386 || BR2_x86_64
+	depends on BR2_TOOLCHAIN_HAS_THREADS 	# libusb
+	depends on BR2_ARCH_HAS_ATOMICS 	# libftdi
 	help
-	  BIOS-updating utility.
-	  Requires PCIUtils libraries.
+	  flashrom is a utility for identifying, reading, writing,
+	  verifying and erasing flash chips. It is designed to flash
+	  BIOS/EFI/coreboot/firmware/optionROM images on mainboards,
+	  network/graphics/storage controller cards, and various other
+	  programmer devices.
 
 	  http://flashrom.org/
+
+comment "flashrom needs a toolchain w/ threads"
+	depends on BR2_i386 || BR2_x86_64
+	depends on BR2_ARCH_HAS_ATOMICS
+	depends on !BR2_TOOLCHAIN_HAS_THREADS

package/flashrom/flashrom.hash

@@ -0,0 +1,2 @@
+# Locally computed
+sha256 13dc7c895e583111ecca370363a3527d237d178a134a94b20db7df177c05f934 flashrom-0.9.8.tar.bz2

package/flashrom/flashrom.mk

@@ -4,10 +4,10 @@
 #
 ################################################################################
 
-FLASHROM_VERSION = 0.9.7
+FLASHROM_VERSION = 0.9.8
 FLASHROM_SOURCE = flashrom-$(FLASHROM_VERSION).tar.bz2
 FLASHROM_SITE = http://download.flashrom.org/releases
-FLASHROM_DEPENDENCIES = pciutils
+FLASHROM_DEPENDENCIES = pciutils libusb libusb-compat libftdi
 FLASHROM_LICENSE = GPLv2+
 FLASHROM_LICENSE_FILES = COPYING
 

package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk

@@ -544,13 +544,6 @@ else
 GST1_PLUGINS_BAD_CONF_OPTS += --disable-bz2
 endif
 
-ifeq ($(BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_CDAUDIO),y)
-GST1_PLUGINS_BAD_CONF_OPTS += --enable-cdaudio
-GST1_PLUGINS_BAD_DEPENDENCIES += libcdaudio
-else
-GST1_PLUGINS_BAD_CONF_OPTS += --disable-cdaudio
-endif
-
 ifeq ($(BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_CURL),y)
 GST1_PLUGINS_BAD_CONF_OPTS += --enable-curl
 GST1_PLUGINS_BAD_DEPENDENCIES += libcurl
@@ -663,23 +656,6 @@ else
 GST1_PLUGINS_BAD_CONF_OPTS += --disable-rsvg
 endif
 
-ifeq ($(BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_EGLGLES),y)
-GST1_PLUGINS_BAD_CONF_OPTS += --enable-eglgles
-GST1_PLUGINS_BAD_DEPENDENCIES += libegl libgles
-
-ifeq ($(BR2_PACKAGE_RPI_USERLAND),y)
-# RPI has odd locations for several required headers.
-GST1_PLUGINS_BAD_CONF_OPTS += --with-egl-window-system=rpi
-GST1_PLUGINS_BAD_CONF_ENV += \
-	CFLAGS="$(TARGET_CFLAGS) \
-	-I$(STAGING_DIR)/usr/include/IL \
-	-I$(STAGING_DIR)/usr/include/interface/vcos/pthreads \
-	-I$(STAGING_DIR)/usr/include/interface/vmcs_host/linux"
-endif
-else
-GST1_PLUGINS_BAD_CONF_OPTS += --disable-eglgles
-endif
-
 ifeq ($(BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_SDL),y)
 GST1_PLUGINS_BAD_CONF_ENV += ac_cv_path_SDL_CONFIG=$(STAGING_DIR)/usr/bin/sdl-config
 GST1_PLUGINS_BAD_CONF_OPTS += --enable-sdl

package/libuv/libuv.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LIBUV_VERSION = v1.4.2
+LIBUV_VERSION = v1.5.0
 LIBUV_SITE = $(call github,libuv,libuv,$(LIBUV_VERSION))
 LIBUV_DEPENDENCIES = host-pkgconf
 LIBUV_INSTALL_STAGING = YES

package/luajit/0004-no-bin-symlink.patch → package/luajit/0001-no-bin-symlink.patch

@@ -1,4 +1,4 @@
-Do not use a symlink for the binary, simply name if luajit
+Do not use a symlink for the binary, simply name it luajit
 
 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 

package/luajit/luajit.hash

@@ -1,2 +1,2 @@
 # Hashes from: http://luajit.org/download.html
-md5 f14e9104be513913810cd59c8c658dc0    LuaJIT-2.0.3.tar.gz
+md5 dd9c38307f2223a504cbfb96e477eca0    LuaJIT-2.0.4.tar.gz

package/luajit/luajit.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LUAJIT_VERSION = 2.0.3
+LUAJIT_VERSION = 2.0.4
 LUAJIT_SOURCE = LuaJIT-$(LUAJIT_VERSION).tar.gz
 LUAJIT_SITE = http://luajit.org/download
 LUAJIT_LICENSE = MIT

package/mmc-utils/mmc-utils.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-MMC_UTILS_VERSION = 11f2ceabc4ad3f0dd568e0ce68166e4803e0615b
+MMC_UTILS_VERSION = d0b46442b50794217e53b2455c1344c548d9d088
 MMC_UTILS_SITE = git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git
 MMC_UTILS_LICENSE = GPLv2
 

package/mosquitto/mosquitto.hash

@@ -1,2 +1,2 @@
 # Locally calculated after checking pgp signature
-sha256	75a8b051c7859a2426ffc15bf45b44f79c8288395a325d791ba54e5df9af58a8  mosquitto-1.4.1.tar.gz
+sha256	5ebc3800a0018bfbec62dcc3748fb29f628df068acd39c62c4ef651d9276647e  mosquitto-1.4.2.tar.gz

package/mosquitto/mosquitto.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-MOSQUITTO_VERSION = 1.4.1
+MOSQUITTO_VERSION = 1.4.2
 MOSQUITTO_SITE = http://mosquitto.org/files/source
 MOSQUITTO_LICENSE = EPLv1.0 or EDLv1.0
 MOSQUITTO_LICENSE_FILES = LICENSE.txt epl-v10 edl-v10

package/pkg-kconfig.mk

@@ -35,18 +35,20 @@ $(call inner-generic-package,$(1),$(2),$(3),$(4))
 $(2)_KCONFIG_EDITORS ?= menuconfig
 $(2)_KCONFIG_OPTS ?=
 $(2)_KCONFIG_FIXUP_CMDS ?=
+$(2)_KCONFIG_FRAGMENT_FILES ?=
 
 # The config file could be in-tree, so before depending on it the package should
 # be extracted (and patched) first
 $$($(2)_KCONFIG_FILE): | $(1)-patch
 
-# The .config file is obtained by copying it from the specified source
-# configuration file, after the package has been patched.
+# The specified source configuration file and any additional configuration file
+# fragments are merged together to .config, after the package has been patched.
 # Since the file could be a defconfig file it needs to be expanded to a
 # full .config first. We use 'make oldconfig' because this can be safely
 # done even when the package does not support defconfigs.
-$$($(2)_DIR)/.config: $$($(2)_KCONFIG_FILE)
-	$$(INSTALL) -m 0644 $$($(2)_KCONFIG_FILE) $$($(2)_DIR)/.config
+$$($(2)_DIR)/.config: $$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES)
+	support/kconfig/merge_config.sh -m -O $$(@D) \
+		$$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES)
 	@yes "" | $$($(2)_MAKE_ENV) $$(MAKE) -C $$($(2)_DIR) \
 		$$($(2)_KCONFIG_OPTS) oldconfig
 
@@ -87,6 +89,8 @@ $(1)-savedefconfig: $$($(2)_DIR)/.stamp_kconfig_fixup_done
 # Even though we could use 'cp --preserve-timestamps' here, the separate
 # cp and 'touch --reference' is used for symmetry with $(1)-update-defconfig.
 $(1)-update-config: $$($(2)_DIR)/.stamp_kconfig_fixup_done
+	@$$(if $$($(2)_KCONFIG_FRAGMENT_FILES), \
+		echo "Unable to perform $(1)-update-config when fragment files are set"; exit 1)
 	cp -f $$($(2)_DIR)/.config $$($(2)_KCONFIG_FILE)
 	touch --reference $$($(2)_DIR)/.config $$($(2)_KCONFIG_FILE)
 
@@ -95,6 +99,8 @@ $(1)-update-config: $$($(2)_DIR)/.stamp_kconfig_fixup_done
 # $(1)-update-config, the reference for 'touch' is _not_ the file from which
 # we copy.
 $(1)-update-defconfig: $(1)-savedefconfig
+	@$$(if $$($(2)_KCONFIG_FRAGMENT_FILES), \
+		echo "Unable to perform $(1)-update-defconfig when fragment files are set"; exit 1)
 	cp -f $$($(2)_DIR)/defconfig $$($(2)_KCONFIG_FILE)
 	touch --reference $$($(2)_DIR)/.config $$($(2)_KCONFIG_FILE)
 

package/sepolgen/sepolgen.hash

@@ -0,0 +1,2 @@
+# https://github.com/SELinuxProject/selinux/wiki/Releases
+sha256 8a1c6d3a78c9b6ad3555c74def555f65a62950bf21c111c585bfc382fec3a645  sepolgen-1.1.9.tar.gz

package/sepolgen/sepolgen.mk

@@ -0,0 +1,30 @@
+################################################################################
+#
+# sepolgen
+#
+################################################################################
+
+SEPOLGEN_VERSION = 1.1.9
+SEPOLGEN_SITE = https://raw.githubusercontent.com/wiki/SELinuxProject/selinux/files/releases/20130423
+SEPOLGEN_LICENSE = GPLv2
+SEPOLGEN_LICENSE_FILES = COPYING
+
+ifeq ($(BR2_PACKAGE_PYTHON3),y)
+HOST_SEPOLGEN_DEPENDENCIES = host-python3
+HOST_SEPOLGEN_MAKE_CMDS = $(HOST_CONFIGURE_OPTS) \
+	PYTHONLIBDIR=/usr/lib/python$(PYTHON3_VERSION_MAJOR)/site-packages
+else
+HOST_SEPOLGEN_DEPENDENCIES = host-python
+HOST_SEPOLGEN_MAKE_CMDS = $(HOST_CONFIGURE_OPTS) \
+	PYTHONLIBDIR=/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages
+endif
+
+define HOST_SEPOLGEN_BUILD_CMDS
+	$(MAKE) -C $(@D) $(HOST_SEPOLGEN_MAKE_CMDS) DESTDIR=$(HOST_DIR)
+endef
+
+define HOST_SEPOLGEN_INSTALL_CMDS
+	$(MAKE) -C $(@D) $(HOST_SEPOLGEN_MAKE_CMDS) DESTDIR=$(HOST_DIR) install
+endef
+
+$(eval $(host-generic-package))

package/uclibc/Config.in

@@ -86,6 +86,12 @@ config BR2_UCLIBC_CONFIG
 	  See also docs/README in this package.
 	  If unsure, use the default.
 
+config BR2_UCLIBC_CONFIG_FRAGMENT_FILES
+	string "Additional uClibc configuration fragment files"
+	help
+	  A space-separated list of configuration fragment files,
+	  that will be merged to the main uClibc configuration file.
+
 config BR2_TOOLCHAIN_BUILDROOT_INET_RPC
 	bool "Enable RPC support"
 	select BR2_TOOLCHAIN_HAS_NATIVE_RPC

package/uclibc/uclibc.mk

@@ -42,6 +42,7 @@ UCLIBC_CONFIG_FILE = $(call qstrip,$(BR2_UCLIBC_CONFIG))
 endif
 
 UCLIBC_KCONFIG_FILE = $(UCLIBC_CONFIG_FILE)
+UCLIBC_KCONFIG_FRAGMENT_FILES = $(call qstrip,$(BR2_UCLIBC_CONFIG_FRAGMENT_FILES))
 
 UCLIBC_KCONFIG_OPTS = \
 	$(UCLIBC_MAKE_FLAGS) \