| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126 |
- config USB_DWC3
- tristate "DesignWare USB3 DRD Core Support"
- depends on (USB || USB_GADGET) && HAS_DMA
- select USB_XHCI_PLATFORM if USB_XHCI_HCD
- help
- Say Y or M here if your system has a Dual Role SuperSpeed
- USB controller based on the DesignWare USB3 IP Core.
- If you choose to build this driver is a dynamically linked
- module, the module will be called dwc3.ko.
- if USB_DWC3
- config USB_DWC3_ULPI
- bool "Register ULPI PHY Interface"
- depends on USB_ULPI_BUS=y || USB_ULPI_BUS=USB_DWC3
- help
- Select this if you have ULPI type PHY attached to your DWC3
- controller.
- choice
- bool "DWC3 Mode Selection"
- default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET)
- default USB_DWC3_HOST if (USB && !USB_GADGET)
- default USB_DWC3_GADGET if (!USB && USB_GADGET)
- config USB_DWC3_HOST
- bool "Host only mode"
- depends on USB=y || USB=USB_DWC3
- help
- Select this when you want to use DWC3 in host mode only,
- thereby the gadget feature will be regressed.
- config USB_DWC3_GADGET
- bool "Gadget only mode"
- depends on USB_GADGET=y || USB_GADGET=USB_DWC3
- help
- Select this when you want to use DWC3 in gadget mode only,
- thereby the host feature will be regressed.
- config USB_DWC3_DUAL_ROLE
- bool "Dual Role mode"
- depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
- depends on (EXTCON=y || EXTCON=USB_DWC3)
- help
- This is the default mode of working of DWC3 controller where
- both host and gadget features are enabled.
- endchoice
- comment "Platform Glue Driver Support"
- config USB_DWC3_OMAP
- tristate "Texas Instruments OMAP5 and similar Platforms"
- depends on EXTCON && (ARCH_OMAP2PLUS || COMPILE_TEST)
- depends on OF
- default USB_DWC3
- help
- Some platforms from Texas Instruments like OMAP5, DRA7xxx and
- AM437x use this IP for USB2/3 functionality.
- Say 'Y' or 'M' here if you have one such device
- config USB_DWC3_EXYNOS
- tristate "Samsung Exynos Platform"
- depends on (ARCH_EXYNOS || COMPILE_TEST) && OF
- default USB_DWC3
- help
- Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside,
- say 'Y' or 'M' if you have one such device.
- config USB_DWC3_PCI
- tristate "PCIe-based Platforms"
- depends on USB_PCI && ACPI
- default USB_DWC3
- help
- If you're using the DesignWare Core IP with a PCIe (but not HAPS
- platform), please say 'Y' or 'M' here.
- config USB_DWC3_HAPS
- tristate "Synopsys PCIe-based HAPS Platforms"
- depends on USB_PCI
- default USB_DWC3
- help
- If you're using the DesignWare Core IP with a Synopsys PCIe HAPS
- platform, please say 'Y' or 'M' here.
- config USB_DWC3_KEYSTONE
- tristate "Texas Instruments Keystone2 Platforms"
- depends on ARCH_KEYSTONE || COMPILE_TEST
- default USB_DWC3
- help
- Support of USB2/3 functionality in TI Keystone2 platforms.
- Say 'Y' or 'M' here if you have one such device
- config USB_DWC3_OF_SIMPLE
- tristate "Generic OF Simple Glue Layer"
- depends on OF && COMMON_CLK
- default USB_DWC3
- help
- Support USB2/3 functionality in simple SoC integrations.
- Currently supports Xilinx and Qualcomm DWC USB3 IP.
- Say 'Y' or 'M' if you have one such device.
- config USB_DWC3_ST
- tristate "STMicroelectronics Platforms"
- depends on (ARCH_STI || COMPILE_TEST) && OF
- default USB_DWC3
- help
- STMicroelectronics SoCs with one DesignWare Core USB3 IP
- inside (i.e. STiH407).
- Say 'Y' or 'M' if you have one such device.
- config USB_DWC3_QCOM
- tristate "Qualcomm Platform"
- depends on EXTCON && (ARCH_QCOM || COMPILE_TEST)
- depends on OF
- default USB_DWC3
- help
- Some Qualcomm SoCs use DesignWare Core IP for USB2/3
- functionality.
- This driver also handles Qscratch wrapper which is needed
- for peripheral mode support.
- Say 'Y' or 'M' if you have one such device.
- endif
|
