workingset.c 19 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572
  1. // SPDX-License-Identifier: GPL-2.0
  2. /*
  3. * Workingset detection
  4. *
  5. * Copyright (C) 2013 Red Hat, Inc., Johannes Weiner
  6. */
  7. #include <linux/memcontrol.h>
  8. #include <linux/writeback.h>
  9. #include <linux/shmem_fs.h>
  10. #include <linux/pagemap.h>
  11. #include <linux/atomic.h>
  12. #include <linux/module.h>
  13. #include <linux/swap.h>
  14. #include <linux/dax.h>
  15. #include <linux/fs.h>
  16. #include <linux/mm.h>
  17. /*
  18. * Double CLOCK lists
  19. *
  20. * Per node, two clock lists are maintained for file pages: the
  21. * inactive and the active list. Freshly faulted pages start out at
  22. * the head of the inactive list and page reclaim scans pages from the
  23. * tail. Pages that are accessed multiple times on the inactive list
  24. * are promoted to the active list, to protect them from reclaim,
  25. * whereas active pages are demoted to the inactive list when the
  26. * active list grows too big.
  27. *
  28. * fault ------------------------+
  29. * |
  30. * +--------------+ | +-------------+
  31. * reclaim <- | inactive | <-+-- demotion | active | <--+
  32. * +--------------+ +-------------+ |
  33. * | |
  34. * +-------------- promotion ------------------+
  35. *
  36. *
  37. * Access frequency and refault distance
  38. *
  39. * A workload is thrashing when its pages are frequently used but they
  40. * are evicted from the inactive list every time before another access
  41. * would have promoted them to the active list.
  42. *
  43. * In cases where the average access distance between thrashing pages
  44. * is bigger than the size of memory there is nothing that can be
  45. * done - the thrashing set could never fit into memory under any
  46. * circumstance.
  47. *
  48. * However, the average access distance could be bigger than the
  49. * inactive list, yet smaller than the size of memory. In this case,
  50. * the set could fit into memory if it weren't for the currently
  51. * active pages - which may be used more, hopefully less frequently:
  52. *
  53. * +-memory available to cache-+
  54. * | |
  55. * +-inactive------+-active----+
  56. * a b | c d e f g h i | J K L M N |
  57. * +---------------+-----------+
  58. *
  59. * It is prohibitively expensive to accurately track access frequency
  60. * of pages. But a reasonable approximation can be made to measure
  61. * thrashing on the inactive list, after which refaulting pages can be
  62. * activated optimistically to compete with the existing active pages.
  63. *
  64. * Approximating inactive page access frequency - Observations:
  65. *
  66. * 1. When a page is accessed for the first time, it is added to the
  67. * head of the inactive list, slides every existing inactive page
  68. * towards the tail by one slot, and pushes the current tail page
  69. * out of memory.
  70. *
  71. * 2. When a page is accessed for the second time, it is promoted to
  72. * the active list, shrinking the inactive list by one slot. This
  73. * also slides all inactive pages that were faulted into the cache
  74. * more recently than the activated page towards the tail of the
  75. * inactive list.
  76. *
  77. * Thus:
  78. *
  79. * 1. The sum of evictions and activations between any two points in
  80. * time indicate the minimum number of inactive pages accessed in
  81. * between.
  82. *
  83. * 2. Moving one inactive page N page slots towards the tail of the
  84. * list requires at least N inactive page accesses.
  85. *
  86. * Combining these:
  87. *
  88. * 1. When a page is finally evicted from memory, the number of
  89. * inactive pages accessed while the page was in cache is at least
  90. * the number of page slots on the inactive list.
  91. *
  92. * 2. In addition, measuring the sum of evictions and activations (E)
  93. * at the time of a page's eviction, and comparing it to another
  94. * reading (R) at the time the page faults back into memory tells
  95. * the minimum number of accesses while the page was not cached.
  96. * This is called the refault distance.
  97. *
  98. * Because the first access of the page was the fault and the second
  99. * access the refault, we combine the in-cache distance with the
  100. * out-of-cache distance to get the complete minimum access distance
  101. * of this page:
  102. *
  103. * NR_inactive + (R - E)
  104. *
  105. * And knowing the minimum access distance of a page, we can easily
  106. * tell if the page would be able to stay in cache assuming all page
  107. * slots in the cache were available:
  108. *
  109. * NR_inactive + (R - E) <= NR_inactive + NR_active
  110. *
  111. * which can be further simplified to
  112. *
  113. * (R - E) <= NR_active
  114. *
  115. * Put into words, the refault distance (out-of-cache) can be seen as
  116. * a deficit in inactive list space (in-cache). If the inactive list
  117. * had (R - E) more page slots, the page would not have been evicted
  118. * in between accesses, but activated instead. And on a full system,
  119. * the only thing eating into inactive list space is active pages.
  120. *
  121. *
  122. * Refaulting inactive pages
  123. *
  124. * All that is known about the active list is that the pages have been
  125. * accessed more than once in the past. This means that at any given
  126. * time there is actually a good chance that pages on the active list
  127. * are no longer in active use.
  128. *
  129. * So when a refault distance of (R - E) is observed and there are at
  130. * least (R - E) active pages, the refaulting page is activated
  131. * optimistically in the hope that (R - E) active pages are actually
  132. * used less frequently than the refaulting page - or even not used at
  133. * all anymore.
  134. *
  135. * That means if inactive cache is refaulting with a suitable refault
  136. * distance, we assume the cache workingset is transitioning and put
  137. * pressure on the current active list.
  138. *
  139. * If this is wrong and demotion kicks in, the pages which are truly
  140. * used more frequently will be reactivated while the less frequently
  141. * used once will be evicted from memory.
  142. *
  143. * But if this is right, the stale pages will be pushed out of memory
  144. * and the used pages get to stay in cache.
  145. *
  146. * Refaulting active pages
  147. *
  148. * If on the other hand the refaulting pages have recently been
  149. * deactivated, it means that the active list is no longer protecting
  150. * actively used cache from reclaim. The cache is NOT transitioning to
  151. * a different workingset; the existing workingset is thrashing in the
  152. * space allocated to the page cache.
  153. *
  154. *
  155. * Implementation
  156. *
  157. * For each node's file LRU lists, a counter for inactive evictions
  158. * and activations is maintained (node->inactive_age).
  159. *
  160. * On eviction, a snapshot of this counter (along with some bits to
  161. * identify the node) is stored in the now empty page cache
  162. * slot of the evicted page. This is called a shadow entry.
  163. *
  164. * On cache misses for which there are shadow entries, an eligible
  165. * refault distance will immediately activate the refaulting page.
  166. */
  167. #define EVICTION_SHIFT ((BITS_PER_LONG - BITS_PER_XA_VALUE) + \
  168. 1 + NODES_SHIFT + MEM_CGROUP_ID_SHIFT)
  169. #define EVICTION_MASK (~0UL >> EVICTION_SHIFT)
  170. /*
  171. * Eviction timestamps need to be able to cover the full range of
  172. * actionable refaults. However, bits are tight in the xarray
  173. * entry, and after storing the identifier for the lruvec there might
  174. * not be enough left to represent every single actionable refault. In
  175. * that case, we have to sacrifice granularity for distance, and group
  176. * evictions into coarser buckets by shaving off lower timestamp bits.
  177. */
  178. static unsigned int bucket_order __read_mostly;
  179. static void *pack_shadow(int memcgid, pg_data_t *pgdat, unsigned long eviction,
  180. bool workingset)
  181. {
  182. eviction >>= bucket_order;
  183. eviction &= EVICTION_MASK;
  184. eviction = (eviction << MEM_CGROUP_ID_SHIFT) | memcgid;
  185. eviction = (eviction << NODES_SHIFT) | pgdat->node_id;
  186. eviction = (eviction << 1) | workingset;
  187. return xa_mk_value(eviction);
  188. }
  189. static void unpack_shadow(void *shadow, int *memcgidp, pg_data_t **pgdat,
  190. unsigned long *evictionp, bool *workingsetp)
  191. {
  192. unsigned long entry = xa_to_value(shadow);
  193. int memcgid, nid;
  194. bool workingset;
  195. workingset = entry & 1;
  196. entry >>= 1;
  197. nid = entry & ((1UL << NODES_SHIFT) - 1);
  198. entry >>= NODES_SHIFT;
  199. memcgid = entry & ((1UL << MEM_CGROUP_ID_SHIFT) - 1);
  200. entry >>= MEM_CGROUP_ID_SHIFT;
  201. *memcgidp = memcgid;
  202. *pgdat = NODE_DATA(nid);
  203. *evictionp = entry << bucket_order;
  204. *workingsetp = workingset;
  205. }
  206. /**
  207. * workingset_eviction - note the eviction of a page from memory
  208. * @mapping: address space the page was backing
  209. * @page: the page being evicted
  210. *
  211. * Returns a shadow entry to be stored in @mapping->i_pages in place
  212. * of the evicted @page so that a later refault can be detected.
  213. */
  214. void *workingset_eviction(struct address_space *mapping, struct page *page)
  215. {
  216. struct pglist_data *pgdat = page_pgdat(page);
  217. struct mem_cgroup *memcg = page_memcg(page);
  218. int memcgid = mem_cgroup_id(memcg);
  219. unsigned long eviction;
  220. struct lruvec *lruvec;
  221. /* Page is fully exclusive and pins page->mem_cgroup */
  222. VM_BUG_ON_PAGE(PageLRU(page), page);
  223. VM_BUG_ON_PAGE(page_count(page), page);
  224. VM_BUG_ON_PAGE(!PageLocked(page), page);
  225. lruvec = mem_cgroup_lruvec(pgdat, memcg);
  226. eviction = atomic_long_inc_return(&lruvec->inactive_age);
  227. return pack_shadow(memcgid, pgdat, eviction, PageWorkingset(page));
  228. }
  229. /**
  230. * workingset_refault - evaluate the refault of a previously evicted page
  231. * @page: the freshly allocated replacement page
  232. * @shadow: shadow entry of the evicted page
  233. *
  234. * Calculates and evaluates the refault distance of the previously
  235. * evicted page in the context of the node it was allocated in.
  236. */
  237. void workingset_refault(struct page *page, void *shadow)
  238. {
  239. unsigned long refault_distance;
  240. struct pglist_data *pgdat;
  241. unsigned long active_file;
  242. struct mem_cgroup *memcg;
  243. unsigned long eviction;
  244. struct lruvec *lruvec;
  245. unsigned long refault;
  246. bool workingset;
  247. int memcgid;
  248. unpack_shadow(shadow, &memcgid, &pgdat, &eviction, &workingset);
  249. rcu_read_lock();
  250. /*
  251. * Look up the memcg associated with the stored ID. It might
  252. * have been deleted since the page's eviction.
  253. *
  254. * Note that in rare events the ID could have been recycled
  255. * for a new cgroup that refaults a shared page. This is
  256. * impossible to tell from the available data. However, this
  257. * should be a rare and limited disturbance, and activations
  258. * are always speculative anyway. Ultimately, it's the aging
  259. * algorithm's job to shake out the minimum access frequency
  260. * for the active cache.
  261. *
  262. * XXX: On !CONFIG_MEMCG, this will always return NULL; it
  263. * would be better if the root_mem_cgroup existed in all
  264. * configurations instead.
  265. */
  266. memcg = mem_cgroup_from_id(memcgid);
  267. if (!mem_cgroup_disabled() && !memcg)
  268. goto out;
  269. lruvec = mem_cgroup_lruvec(pgdat, memcg);
  270. refault = atomic_long_read(&lruvec->inactive_age);
  271. active_file = lruvec_lru_size(lruvec, LRU_ACTIVE_FILE, MAX_NR_ZONES);
  272. /*
  273. * Calculate the refault distance
  274. *
  275. * The unsigned subtraction here gives an accurate distance
  276. * across inactive_age overflows in most cases. There is a
  277. * special case: usually, shadow entries have a short lifetime
  278. * and are either refaulted or reclaimed along with the inode
  279. * before they get too old. But it is not impossible for the
  280. * inactive_age to lap a shadow entry in the field, which can
  281. * then result in a false small refault distance, leading to a
  282. * false activation should this old entry actually refault
  283. * again. However, earlier kernels used to deactivate
  284. * unconditionally with *every* reclaim invocation for the
  285. * longest time, so the occasional inappropriate activation
  286. * leading to pressure on the active list is not a problem.
  287. */
  288. refault_distance = (refault - eviction) & EVICTION_MASK;
  289. inc_lruvec_state(lruvec, WORKINGSET_REFAULT);
  290. /*
  291. * Compare the distance to the existing workingset size. We
  292. * don't act on pages that couldn't stay resident even if all
  293. * the memory was available to the page cache.
  294. */
  295. if (refault_distance > active_file)
  296. goto out;
  297. SetPageActive(page);
  298. atomic_long_inc(&lruvec->inactive_age);
  299. inc_lruvec_state(lruvec, WORKINGSET_ACTIVATE);
  300. /* Page was active prior to eviction */
  301. if (workingset) {
  302. SetPageWorkingset(page);
  303. inc_lruvec_state(lruvec, WORKINGSET_RESTORE);
  304. }
  305. out:
  306. rcu_read_unlock();
  307. }
  308. /**
  309. * workingset_activation - note a page activation
  310. * @page: page that is being activated
  311. */
  312. void workingset_activation(struct page *page)
  313. {
  314. struct mem_cgroup *memcg;
  315. struct lruvec *lruvec;
  316. rcu_read_lock();
  317. /*
  318. * Filter non-memcg pages here, e.g. unmap can call
  319. * mark_page_accessed() on VDSO pages.
  320. *
  321. * XXX: See workingset_refault() - this should return
  322. * root_mem_cgroup even for !CONFIG_MEMCG.
  323. */
  324. memcg = page_memcg_rcu(page);
  325. if (!mem_cgroup_disabled() && !memcg)
  326. goto out;
  327. lruvec = mem_cgroup_lruvec(page_pgdat(page), memcg);
  328. atomic_long_inc(&lruvec->inactive_age);
  329. out:
  330. rcu_read_unlock();
  331. }
  332. /*
  333. * Shadow entries reflect the share of the working set that does not
  334. * fit into memory, so their number depends on the access pattern of
  335. * the workload. In most cases, they will refault or get reclaimed
  336. * along with the inode, but a (malicious) workload that streams
  337. * through files with a total size several times that of available
  338. * memory, while preventing the inodes from being reclaimed, can
  339. * create excessive amounts of shadow nodes. To keep a lid on this,
  340. * track shadow nodes and reclaim them when they grow way past the
  341. * point where they would still be useful.
  342. */
  343. static struct list_lru shadow_nodes;
  344. void workingset_update_node(struct xa_node *node)
  345. {
  346. /*
  347. * Track non-empty nodes that contain only shadow entries;
  348. * unlink those that contain pages or are being freed.
  349. *
  350. * Avoid acquiring the list_lru lock when the nodes are
  351. * already where they should be. The list_empty() test is safe
  352. * as node->private_list is protected by the i_pages lock.
  353. */
  354. VM_WARN_ON_ONCE(!irqs_disabled()); /* For __inc_lruvec_page_state */
  355. if (node->count && node->count == node->nr_values) {
  356. if (list_empty(&node->private_list)) {
  357. list_lru_add(&shadow_nodes, &node->private_list);
  358. __inc_lruvec_page_state(virt_to_page(node),
  359. WORKINGSET_NODES);
  360. }
  361. } else {
  362. if (!list_empty(&node->private_list)) {
  363. list_lru_del(&shadow_nodes, &node->private_list);
  364. __dec_lruvec_page_state(virt_to_page(node),
  365. WORKINGSET_NODES);
  366. }
  367. }
  368. }
  369. static unsigned long count_shadow_nodes(struct shrinker *shrinker,
  370. struct shrink_control *sc)
  371. {
  372. unsigned long max_nodes;
  373. unsigned long nodes;
  374. unsigned long pages;
  375. nodes = list_lru_shrink_count(&shadow_nodes, sc);
  376. /*
  377. * Approximate a reasonable limit for the nodes
  378. * containing shadow entries. We don't need to keep more
  379. * shadow entries than possible pages on the active list,
  380. * since refault distances bigger than that are dismissed.
  381. *
  382. * The size of the active list converges toward 100% of
  383. * overall page cache as memory grows, with only a tiny
  384. * inactive list. Assume the total cache size for that.
  385. *
  386. * Nodes might be sparsely populated, with only one shadow
  387. * entry in the extreme case. Obviously, we cannot keep one
  388. * node for every eligible shadow entry, so compromise on a
  389. * worst-case density of 1/8th. Below that, not all eligible
  390. * refaults can be detected anymore.
  391. *
  392. * On 64-bit with 7 xa_nodes per page and 64 slots
  393. * each, this will reclaim shadow entries when they consume
  394. * ~1.8% of available memory:
  395. *
  396. * PAGE_SIZE / xa_nodes / node_entries * 8 / PAGE_SIZE
  397. */
  398. #ifdef CONFIG_MEMCG
  399. if (sc->memcg) {
  400. struct lruvec *lruvec;
  401. pages = mem_cgroup_node_nr_lru_pages(sc->memcg, sc->nid,
  402. LRU_ALL);
  403. lruvec = mem_cgroup_lruvec(NODE_DATA(sc->nid), sc->memcg);
  404. pages += lruvec_page_state(lruvec, NR_SLAB_RECLAIMABLE);
  405. pages += lruvec_page_state(lruvec, NR_SLAB_UNRECLAIMABLE);
  406. } else
  407. #endif
  408. pages = node_present_pages(sc->nid);
  409. max_nodes = pages >> (XA_CHUNK_SHIFT - 3);
  410. if (!nodes)
  411. return SHRINK_EMPTY;
  412. if (nodes <= max_nodes)
  413. return 0;
  414. return nodes - max_nodes;
  415. }
  416. static enum lru_status shadow_lru_isolate(struct list_head *item,
  417. struct list_lru_one *lru,
  418. spinlock_t *lru_lock,
  419. void *arg) __must_hold(lru_lock)
  420. {
  421. struct xa_node *node = container_of(item, struct xa_node, private_list);
  422. XA_STATE(xas, node->array, 0);
  423. struct address_space *mapping;
  424. int ret;
  425. /*
  426. * Page cache insertions and deletions synchroneously maintain
  427. * the shadow node LRU under the i_pages lock and the
  428. * lru_lock. Because the page cache tree is emptied before
  429. * the inode can be destroyed, holding the lru_lock pins any
  430. * address_space that has nodes on the LRU.
  431. *
  432. * We can then safely transition to the i_pages lock to
  433. * pin only the address_space of the particular node we want
  434. * to reclaim, take the node off-LRU, and drop the lru_lock.
  435. */
  436. mapping = container_of(node->array, struct address_space, i_pages);
  437. /* Coming from the list, invert the lock order */
  438. if (!xa_trylock(&mapping->i_pages)) {
  439. spin_unlock_irq(lru_lock);
  440. ret = LRU_RETRY;
  441. goto out;
  442. }
  443. list_lru_isolate(lru, item);
  444. __dec_lruvec_page_state(virt_to_page(node), WORKINGSET_NODES);
  445. spin_unlock(lru_lock);
  446. /*
  447. * The nodes should only contain one or more shadow entries,
  448. * no pages, so we expect to be able to remove them all and
  449. * delete and free the empty node afterwards.
  450. */
  451. if (WARN_ON_ONCE(!node->nr_values))
  452. goto out_invalid;
  453. if (WARN_ON_ONCE(node->count != node->nr_values))
  454. goto out_invalid;
  455. mapping->nrexceptional -= node->nr_values;
  456. xas.xa_node = xa_parent_locked(&mapping->i_pages, node);
  457. xas.xa_offset = node->offset;
  458. xas.xa_shift = node->shift + XA_CHUNK_SHIFT;
  459. xas_set_update(&xas, workingset_update_node);
  460. /*
  461. * We could store a shadow entry here which was the minimum of the
  462. * shadow entries we were tracking ...
  463. */
  464. xas_store(&xas, NULL);
  465. __inc_lruvec_page_state(virt_to_page(node), WORKINGSET_NODERECLAIM);
  466. out_invalid:
  467. xa_unlock_irq(&mapping->i_pages);
  468. ret = LRU_REMOVED_RETRY;
  469. out:
  470. cond_resched();
  471. spin_lock_irq(lru_lock);
  472. return ret;
  473. }
  474. static unsigned long scan_shadow_nodes(struct shrinker *shrinker,
  475. struct shrink_control *sc)
  476. {
  477. /* list_lru lock nests inside the IRQ-safe i_pages lock */
  478. return list_lru_shrink_walk_irq(&shadow_nodes, sc, shadow_lru_isolate,
  479. NULL);
  480. }
  481. static struct shrinker workingset_shadow_shrinker = {
  482. .count_objects = count_shadow_nodes,
  483. .scan_objects = scan_shadow_nodes,
  484. .seeks = 0, /* ->count reports only fully expendable nodes */
  485. .flags = SHRINKER_NUMA_AWARE | SHRINKER_MEMCG_AWARE,
  486. };
  487. /*
  488. * Our list_lru->lock is IRQ-safe as it nests inside the IRQ-safe
  489. * i_pages lock.
  490. */
  491. static struct lock_class_key shadow_nodes_key;
  492. static int __init workingset_init(void)
  493. {
  494. unsigned int timestamp_bits;
  495. unsigned int max_order;
  496. int ret;
  497. BUILD_BUG_ON(BITS_PER_LONG < EVICTION_SHIFT);
  498. /*
  499. * Calculate the eviction bucket size to cover the longest
  500. * actionable refault distance, which is currently half of
  501. * memory (totalram_pages/2). However, memory hotplug may add
  502. * some more pages at runtime, so keep working with up to
  503. * double the initial memory by using totalram_pages as-is.
  504. */
  505. timestamp_bits = BITS_PER_LONG - EVICTION_SHIFT;
  506. max_order = fls_long(totalram_pages - 1);
  507. if (max_order > timestamp_bits)
  508. bucket_order = max_order - timestamp_bits;
  509. pr_info("workingset: timestamp_bits=%d max_order=%d bucket_order=%u\n",
  510. timestamp_bits, max_order, bucket_order);
  511. ret = prealloc_shrinker(&workingset_shadow_shrinker);
  512. if (ret)
  513. goto err;
  514. ret = __list_lru_init(&shadow_nodes, true, &shadow_nodes_key,
  515. &workingset_shadow_shrinker);
  516. if (ret)
  517. goto err_list_lru;
  518. register_shrinker_prepared(&workingset_shadow_shrinker);
  519. return 0;
  520. err_list_lru:
  521. free_prealloced_shrinker(&workingset_shadow_shrinker);
  522. err:
  523. return ret;
  524. }
  525. module_init(workingset_init);