config.c 10 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342
  1. /*
  2. * net/tipc/config.c: TIPC configuration management code
  3. *
  4. * Copyright (c) 2002-2006, Ericsson AB
  5. * Copyright (c) 2004-2007, 2010-2013, Wind River Systems
  6. * All rights reserved.
  7. *
  8. * Redistribution and use in source and binary forms, with or without
  9. * modification, are permitted provided that the following conditions are met:
  10. *
  11. * 1. Redistributions of source code must retain the above copyright
  12. * notice, this list of conditions and the following disclaimer.
  13. * 2. Redistributions in binary form must reproduce the above copyright
  14. * notice, this list of conditions and the following disclaimer in the
  15. * documentation and/or other materials provided with the distribution.
  16. * 3. Neither the names of the copyright holders nor the names of its
  17. * contributors may be used to endorse or promote products derived from
  18. * this software without specific prior written permission.
  19. *
  20. * Alternatively, this software may be distributed under the terms of the
  21. * GNU General Public License ("GPL") version 2 as published by the Free
  22. * Software Foundation.
  23. *
  24. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  25. * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  26. * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  27. * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  28. * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  29. * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  30. * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  31. * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  32. * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  33. * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  34. * POSSIBILITY OF SUCH DAMAGE.
  35. */
  36. #include "core.h"
  37. #include "port.h"
  38. #include "name_table.h"
  39. #include "config.h"
  40. #include "server.h"
  41. #define REPLY_TRUNCATED "<truncated>\n"
  42. static DEFINE_MUTEX(config_mutex);
  43. static const void *req_tlv_area; /* request message TLV area */
  44. static int req_tlv_space; /* request message TLV area size */
  45. static int rep_headroom; /* reply message headroom to use */
  46. struct sk_buff *tipc_cfg_reply_alloc(int payload_size)
  47. {
  48. struct sk_buff *buf;
  49. buf = alloc_skb(rep_headroom + payload_size, GFP_ATOMIC);
  50. if (buf)
  51. skb_reserve(buf, rep_headroom);
  52. return buf;
  53. }
  54. int tipc_cfg_append_tlv(struct sk_buff *buf, int tlv_type,
  55. void *tlv_data, int tlv_data_size)
  56. {
  57. struct tlv_desc *tlv = (struct tlv_desc *)skb_tail_pointer(buf);
  58. int new_tlv_space = TLV_SPACE(tlv_data_size);
  59. if (skb_tailroom(buf) < new_tlv_space)
  60. return 0;
  61. skb_put(buf, new_tlv_space);
  62. tlv->tlv_type = htons(tlv_type);
  63. tlv->tlv_len = htons(TLV_LENGTH(tlv_data_size));
  64. if (tlv_data_size && tlv_data)
  65. memcpy(TLV_DATA(tlv), tlv_data, tlv_data_size);
  66. return 1;
  67. }
  68. static struct sk_buff *tipc_cfg_reply_unsigned_type(u16 tlv_type, u32 value)
  69. {
  70. struct sk_buff *buf;
  71. __be32 value_net;
  72. buf = tipc_cfg_reply_alloc(TLV_SPACE(sizeof(value)));
  73. if (buf) {
  74. value_net = htonl(value);
  75. tipc_cfg_append_tlv(buf, tlv_type, &value_net,
  76. sizeof(value_net));
  77. }
  78. return buf;
  79. }
  80. static struct sk_buff *tipc_cfg_reply_unsigned(u32 value)
  81. {
  82. return tipc_cfg_reply_unsigned_type(TIPC_TLV_UNSIGNED, value);
  83. }
  84. struct sk_buff *tipc_cfg_reply_string_type(u16 tlv_type, char *string)
  85. {
  86. struct sk_buff *buf;
  87. int string_len = strlen(string) + 1;
  88. buf = tipc_cfg_reply_alloc(TLV_SPACE(string_len));
  89. if (buf)
  90. tipc_cfg_append_tlv(buf, tlv_type, string, string_len);
  91. return buf;
  92. }
  93. static struct sk_buff *tipc_show_stats(void)
  94. {
  95. struct sk_buff *buf;
  96. struct tlv_desc *rep_tlv;
  97. char *pb;
  98. int pb_len;
  99. int str_len;
  100. u32 value;
  101. if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED))
  102. return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
  103. value = ntohl(*(u32 *)TLV_DATA(req_tlv_area));
  104. if (value != 0)
  105. return tipc_cfg_reply_error_string("unsupported argument");
  106. buf = tipc_cfg_reply_alloc(TLV_SPACE(ULTRA_STRING_MAX_LEN));
  107. if (buf == NULL)
  108. return NULL;
  109. rep_tlv = (struct tlv_desc *)buf->data;
  110. pb = TLV_DATA(rep_tlv);
  111. pb_len = ULTRA_STRING_MAX_LEN;
  112. str_len = tipc_snprintf(pb, pb_len, "TIPC version " TIPC_MOD_VER "\n");
  113. str_len += 1; /* for "\0" */
  114. skb_put(buf, TLV_SPACE(str_len));
  115. TLV_SET(rep_tlv, TIPC_TLV_ULTRA_STRING, NULL, str_len);
  116. return buf;
  117. }
  118. static struct sk_buff *cfg_enable_bearer(void)
  119. {
  120. struct tipc_bearer_config *args;
  121. if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_BEARER_CONFIG))
  122. return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
  123. args = (struct tipc_bearer_config *)TLV_DATA(req_tlv_area);
  124. if (tipc_enable_bearer(args->name,
  125. ntohl(args->disc_domain),
  126. ntohl(args->priority)))
  127. return tipc_cfg_reply_error_string("unable to enable bearer");
  128. return tipc_cfg_reply_none();
  129. }
  130. static struct sk_buff *cfg_disable_bearer(void)
  131. {
  132. if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_BEARER_NAME))
  133. return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
  134. if (tipc_disable_bearer((char *)TLV_DATA(req_tlv_area)))
  135. return tipc_cfg_reply_error_string("unable to disable bearer");
  136. return tipc_cfg_reply_none();
  137. }
  138. static struct sk_buff *cfg_set_own_addr(void)
  139. {
  140. u32 addr;
  141. if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_NET_ADDR))
  142. return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
  143. addr = ntohl(*(__be32 *)TLV_DATA(req_tlv_area));
  144. if (addr == tipc_own_addr)
  145. return tipc_cfg_reply_none();
  146. if (!tipc_addr_node_valid(addr))
  147. return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE
  148. " (node address)");
  149. if (tipc_own_addr)
  150. return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
  151. " (cannot change node address once assigned)");
  152. tipc_net_start(addr);
  153. return tipc_cfg_reply_none();
  154. }
  155. static struct sk_buff *cfg_set_max_ports(void)
  156. {
  157. u32 value;
  158. if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED))
  159. return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
  160. value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area));
  161. if (value == tipc_max_ports)
  162. return tipc_cfg_reply_none();
  163. if (value < 127 || value > 65535)
  164. return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE
  165. " (max ports must be 127-65535)");
  166. return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
  167. " (cannot change max ports while TIPC is active)");
  168. }
  169. static struct sk_buff *cfg_set_netid(void)
  170. {
  171. u32 value;
  172. if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED))
  173. return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
  174. value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area));
  175. if (value == tipc_net_id)
  176. return tipc_cfg_reply_none();
  177. if (value < 1 || value > 9999)
  178. return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE
  179. " (network id must be 1-9999)");
  180. if (tipc_own_addr)
  181. return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
  182. " (cannot change network id once TIPC has joined a network)");
  183. tipc_net_id = value;
  184. return tipc_cfg_reply_none();
  185. }
  186. struct sk_buff *tipc_cfg_do_cmd(u32 orig_node, u16 cmd, const void *request_area,
  187. int request_space, int reply_headroom)
  188. {
  189. struct sk_buff *rep_tlv_buf;
  190. mutex_lock(&config_mutex);
  191. /* Save request and reply details in a well-known location */
  192. req_tlv_area = request_area;
  193. req_tlv_space = request_space;
  194. rep_headroom = reply_headroom;
  195. /* Check command authorization */
  196. if (likely(in_own_node(orig_node))) {
  197. /* command is permitted */
  198. } else {
  199. rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
  200. " (cannot be done remotely)");
  201. goto exit;
  202. }
  203. /* Call appropriate processing routine */
  204. switch (cmd) {
  205. case TIPC_CMD_NOOP:
  206. rep_tlv_buf = tipc_cfg_reply_none();
  207. break;
  208. case TIPC_CMD_GET_NODES:
  209. rep_tlv_buf = tipc_node_get_nodes(req_tlv_area, req_tlv_space);
  210. break;
  211. case TIPC_CMD_GET_LINKS:
  212. rep_tlv_buf = tipc_node_get_links(req_tlv_area, req_tlv_space);
  213. break;
  214. case TIPC_CMD_SHOW_LINK_STATS:
  215. rep_tlv_buf = tipc_link_cmd_show_stats(req_tlv_area, req_tlv_space);
  216. break;
  217. case TIPC_CMD_RESET_LINK_STATS:
  218. rep_tlv_buf = tipc_link_cmd_reset_stats(req_tlv_area, req_tlv_space);
  219. break;
  220. case TIPC_CMD_SHOW_NAME_TABLE:
  221. rep_tlv_buf = tipc_nametbl_get(req_tlv_area, req_tlv_space);
  222. break;
  223. case TIPC_CMD_GET_BEARER_NAMES:
  224. rep_tlv_buf = tipc_bearer_get_names();
  225. break;
  226. case TIPC_CMD_GET_MEDIA_NAMES:
  227. rep_tlv_buf = tipc_media_get_names();
  228. break;
  229. case TIPC_CMD_SHOW_PORTS:
  230. rep_tlv_buf = tipc_port_get_ports();
  231. break;
  232. case TIPC_CMD_SHOW_STATS:
  233. rep_tlv_buf = tipc_show_stats();
  234. break;
  235. case TIPC_CMD_SET_LINK_TOL:
  236. case TIPC_CMD_SET_LINK_PRI:
  237. case TIPC_CMD_SET_LINK_WINDOW:
  238. rep_tlv_buf = tipc_link_cmd_config(req_tlv_area, req_tlv_space, cmd);
  239. break;
  240. case TIPC_CMD_ENABLE_BEARER:
  241. rep_tlv_buf = cfg_enable_bearer();
  242. break;
  243. case TIPC_CMD_DISABLE_BEARER:
  244. rep_tlv_buf = cfg_disable_bearer();
  245. break;
  246. case TIPC_CMD_SET_NODE_ADDR:
  247. rep_tlv_buf = cfg_set_own_addr();
  248. break;
  249. case TIPC_CMD_SET_MAX_PORTS:
  250. rep_tlv_buf = cfg_set_max_ports();
  251. break;
  252. case TIPC_CMD_SET_NETID:
  253. rep_tlv_buf = cfg_set_netid();
  254. break;
  255. case TIPC_CMD_GET_MAX_PORTS:
  256. rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_ports);
  257. break;
  258. case TIPC_CMD_GET_NETID:
  259. rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_net_id);
  260. break;
  261. case TIPC_CMD_NOT_NET_ADMIN:
  262. rep_tlv_buf =
  263. tipc_cfg_reply_error_string(TIPC_CFG_NOT_NET_ADMIN);
  264. break;
  265. case TIPC_CMD_SET_MAX_ZONES:
  266. case TIPC_CMD_GET_MAX_ZONES:
  267. case TIPC_CMD_SET_MAX_SLAVES:
  268. case TIPC_CMD_GET_MAX_SLAVES:
  269. case TIPC_CMD_SET_MAX_CLUSTERS:
  270. case TIPC_CMD_GET_MAX_CLUSTERS:
  271. case TIPC_CMD_SET_MAX_NODES:
  272. case TIPC_CMD_GET_MAX_NODES:
  273. case TIPC_CMD_SET_MAX_SUBSCR:
  274. case TIPC_CMD_GET_MAX_SUBSCR:
  275. case TIPC_CMD_SET_MAX_PUBL:
  276. case TIPC_CMD_GET_MAX_PUBL:
  277. case TIPC_CMD_SET_LOG_SIZE:
  278. case TIPC_CMD_SET_REMOTE_MNG:
  279. case TIPC_CMD_GET_REMOTE_MNG:
  280. case TIPC_CMD_DUMP_LOG:
  281. rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
  282. " (obsolete command)");
  283. break;
  284. default:
  285. rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
  286. " (unknown command)");
  287. break;
  288. }
  289. WARN_ON(rep_tlv_buf->len > TLV_SPACE(ULTRA_STRING_MAX_LEN));
  290. /* Append an error message if we cannot return all requested data */
  291. if (rep_tlv_buf->len == TLV_SPACE(ULTRA_STRING_MAX_LEN)) {
  292. if (*(rep_tlv_buf->data + ULTRA_STRING_MAX_LEN) != '\0')
  293. sprintf(rep_tlv_buf->data + rep_tlv_buf->len -
  294. sizeof(REPLY_TRUNCATED) - 1, REPLY_TRUNCATED);
  295. }
  296. /* Return reply buffer */
  297. exit:
  298. mutex_unlock(&config_mutex);
  299. return rep_tlv_buf;
  300. }