fs-writeback.c 40 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460
  1. /*
  2. * fs/fs-writeback.c
  3. *
  4. * Copyright (C) 2002, Linus Torvalds.
  5. *
  6. * Contains all the functions related to writing back and waiting
  7. * upon dirty inodes against superblocks, and writing back dirty
  8. * pages against inodes. ie: data writeback. Writeout of the
  9. * inode itself is not handled here.
  10. *
  11. * 10Apr2002 Andrew Morton
  12. * Split out of fs/inode.c
  13. * Additions for address_space-based writeback
  14. */
  15. #include <linux/kernel.h>
  16. #include <linux/export.h>
  17. #include <linux/spinlock.h>
  18. #include <linux/slab.h>
  19. #include <linux/sched.h>
  20. #include <linux/fs.h>
  21. #include <linux/mm.h>
  22. #include <linux/pagemap.h>
  23. #include <linux/kthread.h>
  24. #include <linux/writeback.h>
  25. #include <linux/blkdev.h>
  26. #include <linux/backing-dev.h>
  27. #include <linux/tracepoint.h>
  28. #include <linux/device.h>
  29. #include "internal.h"
  30. /*
  31. * 4MB minimal write chunk size
  32. */
  33. #define MIN_WRITEBACK_PAGES (4096UL >> (PAGE_CACHE_SHIFT - 10))
  34. /*
  35. * Passed into wb_writeback(), essentially a subset of writeback_control
  36. */
  37. struct wb_writeback_work {
  38. long nr_pages;
  39. struct super_block *sb;
  40. unsigned long *older_than_this;
  41. enum writeback_sync_modes sync_mode;
  42. unsigned int tagged_writepages:1;
  43. unsigned int for_kupdate:1;
  44. unsigned int range_cyclic:1;
  45. unsigned int for_background:1;
  46. unsigned int for_sync:1; /* sync(2) WB_SYNC_ALL writeback */
  47. enum wb_reason reason; /* why was writeback initiated? */
  48. struct list_head list; /* pending work list */
  49. struct completion *done; /* set if the caller waits */
  50. };
  51. /**
  52. * writeback_in_progress - determine whether there is writeback in progress
  53. * @bdi: the device's backing_dev_info structure.
  54. *
  55. * Determine whether there is writeback waiting to be handled against a
  56. * backing device.
  57. */
  58. int writeback_in_progress(struct backing_dev_info *bdi)
  59. {
  60. return test_bit(BDI_writeback_running, &bdi->state);
  61. }
  62. EXPORT_SYMBOL(writeback_in_progress);
  63. static inline struct backing_dev_info *inode_to_bdi(struct inode *inode)
  64. {
  65. struct super_block *sb = inode->i_sb;
  66. if (sb_is_blkdev_sb(sb))
  67. return inode->i_mapping->backing_dev_info;
  68. return sb->s_bdi;
  69. }
  70. static inline struct inode *wb_inode(struct list_head *head)
  71. {
  72. return list_entry(head, struct inode, i_wb_list);
  73. }
  74. /*
  75. * Include the creation of the trace points after defining the
  76. * wb_writeback_work structure and inline functions so that the definition
  77. * remains local to this file.
  78. */
  79. #define CREATE_TRACE_POINTS
  80. #include <trace/events/writeback.h>
  81. EXPORT_TRACEPOINT_SYMBOL_GPL(wbc_writepage);
  82. static void bdi_wakeup_thread(struct backing_dev_info *bdi)
  83. {
  84. spin_lock_bh(&bdi->wb_lock);
  85. if (test_bit(BDI_registered, &bdi->state))
  86. mod_delayed_work(bdi_wq, &bdi->wb.dwork, 0);
  87. spin_unlock_bh(&bdi->wb_lock);
  88. }
  89. static void bdi_queue_work(struct backing_dev_info *bdi,
  90. struct wb_writeback_work *work)
  91. {
  92. trace_writeback_queue(bdi, work);
  93. spin_lock_bh(&bdi->wb_lock);
  94. if (!test_bit(BDI_registered, &bdi->state)) {
  95. if (work->done)
  96. complete(work->done);
  97. goto out_unlock;
  98. }
  99. list_add_tail(&work->list, &bdi->work_list);
  100. mod_delayed_work(bdi_wq, &bdi->wb.dwork, 0);
  101. out_unlock:
  102. spin_unlock_bh(&bdi->wb_lock);
  103. }
  104. static void
  105. __bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
  106. bool range_cyclic, enum wb_reason reason)
  107. {
  108. struct wb_writeback_work *work;
  109. /*
  110. * This is WB_SYNC_NONE writeback, so if allocation fails just
  111. * wakeup the thread for old dirty data writeback
  112. */
  113. work = kzalloc(sizeof(*work), GFP_ATOMIC);
  114. if (!work) {
  115. trace_writeback_nowork(bdi);
  116. bdi_wakeup_thread(bdi);
  117. return;
  118. }
  119. work->sync_mode = WB_SYNC_NONE;
  120. work->nr_pages = nr_pages;
  121. work->range_cyclic = range_cyclic;
  122. work->reason = reason;
  123. bdi_queue_work(bdi, work);
  124. }
  125. /**
  126. * bdi_start_writeback - start writeback
  127. * @bdi: the backing device to write from
  128. * @nr_pages: the number of pages to write
  129. * @reason: reason why some writeback work was initiated
  130. *
  131. * Description:
  132. * This does WB_SYNC_NONE opportunistic writeback. The IO is only
  133. * started when this function returns, we make no guarantees on
  134. * completion. Caller need not hold sb s_umount semaphore.
  135. *
  136. */
  137. void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
  138. enum wb_reason reason)
  139. {
  140. __bdi_start_writeback(bdi, nr_pages, true, reason);
  141. }
  142. /**
  143. * bdi_start_background_writeback - start background writeback
  144. * @bdi: the backing device to write from
  145. *
  146. * Description:
  147. * This makes sure WB_SYNC_NONE background writeback happens. When
  148. * this function returns, it is only guaranteed that for given BDI
  149. * some IO is happening if we are over background dirty threshold.
  150. * Caller need not hold sb s_umount semaphore.
  151. */
  152. void bdi_start_background_writeback(struct backing_dev_info *bdi)
  153. {
  154. /*
  155. * We just wake up the flusher thread. It will perform background
  156. * writeback as soon as there is no other work to do.
  157. */
  158. trace_writeback_wake_background(bdi);
  159. bdi_wakeup_thread(bdi);
  160. }
  161. /*
  162. * Remove the inode from the writeback list it is on.
  163. */
  164. void inode_wb_list_del(struct inode *inode)
  165. {
  166. struct backing_dev_info *bdi = inode_to_bdi(inode);
  167. spin_lock(&bdi->wb.list_lock);
  168. list_del_init(&inode->i_wb_list);
  169. spin_unlock(&bdi->wb.list_lock);
  170. }
  171. /*
  172. * Redirty an inode: set its when-it-was dirtied timestamp and move it to the
  173. * furthest end of its superblock's dirty-inode list.
  174. *
  175. * Before stamping the inode's ->dirtied_when, we check to see whether it is
  176. * already the most-recently-dirtied inode on the b_dirty list. If that is
  177. * the case then the inode must have been redirtied while it was being written
  178. * out and we don't reset its dirtied_when.
  179. */
  180. static void redirty_tail(struct inode *inode, struct bdi_writeback *wb)
  181. {
  182. assert_spin_locked(&wb->list_lock);
  183. if (!list_empty(&wb->b_dirty)) {
  184. struct inode *tail;
  185. tail = wb_inode(wb->b_dirty.next);
  186. if (time_before(inode->dirtied_when, tail->dirtied_when))
  187. inode->dirtied_when = jiffies;
  188. }
  189. list_move(&inode->i_wb_list, &wb->b_dirty);
  190. }
  191. /*
  192. * requeue inode for re-scanning after bdi->b_io list is exhausted.
  193. */
  194. static void requeue_io(struct inode *inode, struct bdi_writeback *wb)
  195. {
  196. assert_spin_locked(&wb->list_lock);
  197. list_move(&inode->i_wb_list, &wb->b_more_io);
  198. }
  199. static void inode_sync_complete(struct inode *inode)
  200. {
  201. inode->i_state &= ~I_SYNC;
  202. /* If inode is clean an unused, put it into LRU now... */
  203. inode_add_lru(inode);
  204. /* Waiters must see I_SYNC cleared before being woken up */
  205. smp_mb();
  206. wake_up_bit(&inode->i_state, __I_SYNC);
  207. }
  208. static bool inode_dirtied_after(struct inode *inode, unsigned long t)
  209. {
  210. bool ret = time_after(inode->dirtied_when, t);
  211. #ifndef CONFIG_64BIT
  212. /*
  213. * For inodes being constantly redirtied, dirtied_when can get stuck.
  214. * It _appears_ to be in the future, but is actually in distant past.
  215. * This test is necessary to prevent such wrapped-around relative times
  216. * from permanently stopping the whole bdi writeback.
  217. */
  218. ret = ret && time_before_eq(inode->dirtied_when, jiffies);
  219. #endif
  220. return ret;
  221. }
  222. /*
  223. * Move expired (dirtied before work->older_than_this) dirty inodes from
  224. * @delaying_queue to @dispatch_queue.
  225. */
  226. static int move_expired_inodes(struct list_head *delaying_queue,
  227. struct list_head *dispatch_queue,
  228. struct wb_writeback_work *work)
  229. {
  230. LIST_HEAD(tmp);
  231. struct list_head *pos, *node;
  232. struct super_block *sb = NULL;
  233. struct inode *inode;
  234. int do_sb_sort = 0;
  235. int moved = 0;
  236. while (!list_empty(delaying_queue)) {
  237. inode = wb_inode(delaying_queue->prev);
  238. if (work->older_than_this &&
  239. inode_dirtied_after(inode, *work->older_than_this))
  240. break;
  241. list_move(&inode->i_wb_list, &tmp);
  242. moved++;
  243. if (sb_is_blkdev_sb(inode->i_sb))
  244. continue;
  245. if (sb && sb != inode->i_sb)
  246. do_sb_sort = 1;
  247. sb = inode->i_sb;
  248. }
  249. /* just one sb in list, splice to dispatch_queue and we're done */
  250. if (!do_sb_sort) {
  251. list_splice(&tmp, dispatch_queue);
  252. goto out;
  253. }
  254. /* Move inodes from one superblock together */
  255. while (!list_empty(&tmp)) {
  256. sb = wb_inode(tmp.prev)->i_sb;
  257. list_for_each_prev_safe(pos, node, &tmp) {
  258. inode = wb_inode(pos);
  259. if (inode->i_sb == sb)
  260. list_move(&inode->i_wb_list, dispatch_queue);
  261. }
  262. }
  263. out:
  264. return moved;
  265. }
  266. /*
  267. * Queue all expired dirty inodes for io, eldest first.
  268. * Before
  269. * newly dirtied b_dirty b_io b_more_io
  270. * =============> gf edc BA
  271. * After
  272. * newly dirtied b_dirty b_io b_more_io
  273. * =============> g fBAedc
  274. * |
  275. * +--> dequeue for IO
  276. */
  277. static void queue_io(struct bdi_writeback *wb, struct wb_writeback_work *work)
  278. {
  279. int moved;
  280. assert_spin_locked(&wb->list_lock);
  281. list_splice_init(&wb->b_more_io, &wb->b_io);
  282. moved = move_expired_inodes(&wb->b_dirty, &wb->b_io, work);
  283. trace_writeback_queue_io(wb, work, moved);
  284. }
  285. static int write_inode(struct inode *inode, struct writeback_control *wbc)
  286. {
  287. int ret;
  288. if (inode->i_sb->s_op->write_inode && !is_bad_inode(inode)) {
  289. trace_writeback_write_inode_start(inode, wbc);
  290. ret = inode->i_sb->s_op->write_inode(inode, wbc);
  291. trace_writeback_write_inode(inode, wbc);
  292. return ret;
  293. }
  294. return 0;
  295. }
  296. /*
  297. * Wait for writeback on an inode to complete. Called with i_lock held.
  298. * Caller must make sure inode cannot go away when we drop i_lock.
  299. */
  300. static void __inode_wait_for_writeback(struct inode *inode)
  301. __releases(inode->i_lock)
  302. __acquires(inode->i_lock)
  303. {
  304. DEFINE_WAIT_BIT(wq, &inode->i_state, __I_SYNC);
  305. wait_queue_head_t *wqh;
  306. wqh = bit_waitqueue(&inode->i_state, __I_SYNC);
  307. while (inode->i_state & I_SYNC) {
  308. spin_unlock(&inode->i_lock);
  309. __wait_on_bit(wqh, &wq, inode_wait, TASK_UNINTERRUPTIBLE);
  310. spin_lock(&inode->i_lock);
  311. }
  312. }
  313. /*
  314. * Wait for writeback on an inode to complete. Caller must have inode pinned.
  315. */
  316. void inode_wait_for_writeback(struct inode *inode)
  317. {
  318. spin_lock(&inode->i_lock);
  319. __inode_wait_for_writeback(inode);
  320. spin_unlock(&inode->i_lock);
  321. }
  322. /*
  323. * Sleep until I_SYNC is cleared. This function must be called with i_lock
  324. * held and drops it. It is aimed for callers not holding any inode reference
  325. * so once i_lock is dropped, inode can go away.
  326. */
  327. static void inode_sleep_on_writeback(struct inode *inode)
  328. __releases(inode->i_lock)
  329. {
  330. DEFINE_WAIT(wait);
  331. wait_queue_head_t *wqh = bit_waitqueue(&inode->i_state, __I_SYNC);
  332. int sleep;
  333. prepare_to_wait(wqh, &wait, TASK_UNINTERRUPTIBLE);
  334. sleep = inode->i_state & I_SYNC;
  335. spin_unlock(&inode->i_lock);
  336. if (sleep)
  337. schedule();
  338. finish_wait(wqh, &wait);
  339. }
  340. /*
  341. * Find proper writeback list for the inode depending on its current state and
  342. * possibly also change of its state while we were doing writeback. Here we
  343. * handle things such as livelock prevention or fairness of writeback among
  344. * inodes. This function can be called only by flusher thread - noone else
  345. * processes all inodes in writeback lists and requeueing inodes behind flusher
  346. * thread's back can have unexpected consequences.
  347. */
  348. static void requeue_inode(struct inode *inode, struct bdi_writeback *wb,
  349. struct writeback_control *wbc)
  350. {
  351. if (inode->i_state & I_FREEING)
  352. return;
  353. /*
  354. * Sync livelock prevention. Each inode is tagged and synced in one
  355. * shot. If still dirty, it will be redirty_tail()'ed below. Update
  356. * the dirty time to prevent enqueue and sync it again.
  357. */
  358. if ((inode->i_state & I_DIRTY) &&
  359. (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages))
  360. inode->dirtied_when = jiffies;
  361. if (wbc->pages_skipped) {
  362. /*
  363. * writeback is not making progress due to locked
  364. * buffers. Skip this inode for now.
  365. */
  366. redirty_tail(inode, wb);
  367. return;
  368. }
  369. if (mapping_tagged(inode->i_mapping, PAGECACHE_TAG_DIRTY)) {
  370. /*
  371. * We didn't write back all the pages. nfs_writepages()
  372. * sometimes bales out without doing anything.
  373. */
  374. if (wbc->nr_to_write <= 0) {
  375. /* Slice used up. Queue for next turn. */
  376. requeue_io(inode, wb);
  377. } else {
  378. /*
  379. * Writeback blocked by something other than
  380. * congestion. Delay the inode for some time to
  381. * avoid spinning on the CPU (100% iowait)
  382. * retrying writeback of the dirty page/inode
  383. * that cannot be performed immediately.
  384. */
  385. redirty_tail(inode, wb);
  386. }
  387. } else if (inode->i_state & I_DIRTY) {
  388. /*
  389. * Filesystems can dirty the inode during writeback operations,
  390. * such as delayed allocation during submission or metadata
  391. * updates after data IO completion.
  392. */
  393. redirty_tail(inode, wb);
  394. } else {
  395. /* The inode is clean. Remove from writeback lists. */
  396. list_del_init(&inode->i_wb_list);
  397. }
  398. }
  399. /*
  400. * Write out an inode and its dirty pages. Do not update the writeback list
  401. * linkage. That is left to the caller. The caller is also responsible for
  402. * setting I_SYNC flag and calling inode_sync_complete() to clear it.
  403. */
  404. static int
  405. __writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
  406. {
  407. struct address_space *mapping = inode->i_mapping;
  408. long nr_to_write = wbc->nr_to_write;
  409. unsigned dirty;
  410. int ret;
  411. WARN_ON(!(inode->i_state & I_SYNC));
  412. trace_writeback_single_inode_start(inode, wbc, nr_to_write);
  413. ret = do_writepages(mapping, wbc);
  414. /*
  415. * Make sure to wait on the data before writing out the metadata.
  416. * This is important for filesystems that modify metadata on data
  417. * I/O completion. We don't do it for sync(2) writeback because it has a
  418. * separate, external IO completion path and ->sync_fs for guaranteeing
  419. * inode metadata is written back correctly.
  420. */
  421. if (wbc->sync_mode == WB_SYNC_ALL && !wbc->for_sync) {
  422. int err = filemap_fdatawait(mapping);
  423. if (ret == 0)
  424. ret = err;
  425. }
  426. /*
  427. * Some filesystems may redirty the inode during the writeback
  428. * due to delalloc, clear dirty metadata flags right before
  429. * write_inode()
  430. */
  431. spin_lock(&inode->i_lock);
  432. /* Clear I_DIRTY_PAGES if we've written out all dirty pages */
  433. if (!mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
  434. inode->i_state &= ~I_DIRTY_PAGES;
  435. dirty = inode->i_state & I_DIRTY;
  436. inode->i_state &= ~(I_DIRTY_SYNC | I_DIRTY_DATASYNC);
  437. spin_unlock(&inode->i_lock);
  438. /* Don't write the inode if only I_DIRTY_PAGES was set */
  439. if (dirty & (I_DIRTY_SYNC | I_DIRTY_DATASYNC)) {
  440. int err = write_inode(inode, wbc);
  441. if (ret == 0)
  442. ret = err;
  443. }
  444. trace_writeback_single_inode(inode, wbc, nr_to_write);
  445. return ret;
  446. }
  447. /*
  448. * Write out an inode's dirty pages. Either the caller has an active reference
  449. * on the inode or the inode has I_WILL_FREE set.
  450. *
  451. * This function is designed to be called for writing back one inode which
  452. * we go e.g. from filesystem. Flusher thread uses __writeback_single_inode()
  453. * and does more profound writeback list handling in writeback_sb_inodes().
  454. */
  455. static int
  456. writeback_single_inode(struct inode *inode, struct bdi_writeback *wb,
  457. struct writeback_control *wbc)
  458. {
  459. int ret = 0;
  460. spin_lock(&inode->i_lock);
  461. if (!atomic_read(&inode->i_count))
  462. WARN_ON(!(inode->i_state & (I_WILL_FREE|I_FREEING)));
  463. else
  464. WARN_ON(inode->i_state & I_WILL_FREE);
  465. if (inode->i_state & I_SYNC) {
  466. if (wbc->sync_mode != WB_SYNC_ALL)
  467. goto out;
  468. /*
  469. * It's a data-integrity sync. We must wait. Since callers hold
  470. * inode reference or inode has I_WILL_FREE set, it cannot go
  471. * away under us.
  472. */
  473. __inode_wait_for_writeback(inode);
  474. }
  475. WARN_ON(inode->i_state & I_SYNC);
  476. /*
  477. * Skip inode if it is clean and we have no outstanding writeback in
  478. * WB_SYNC_ALL mode. We don't want to mess with writeback lists in this
  479. * function since flusher thread may be doing for example sync in
  480. * parallel and if we move the inode, it could get skipped. So here we
  481. * make sure inode is on some writeback list and leave it there unless
  482. * we have completely cleaned the inode.
  483. */
  484. if (!(inode->i_state & I_DIRTY) &&
  485. (wbc->sync_mode != WB_SYNC_ALL ||
  486. !mapping_tagged(inode->i_mapping, PAGECACHE_TAG_WRITEBACK)))
  487. goto out;
  488. inode->i_state |= I_SYNC;
  489. spin_unlock(&inode->i_lock);
  490. ret = __writeback_single_inode(inode, wbc);
  491. spin_lock(&wb->list_lock);
  492. spin_lock(&inode->i_lock);
  493. /*
  494. * If inode is clean, remove it from writeback lists. Otherwise don't
  495. * touch it. See comment above for explanation.
  496. */
  497. if (!(inode->i_state & I_DIRTY))
  498. list_del_init(&inode->i_wb_list);
  499. spin_unlock(&wb->list_lock);
  500. inode_sync_complete(inode);
  501. out:
  502. spin_unlock(&inode->i_lock);
  503. return ret;
  504. }
  505. static long writeback_chunk_size(struct backing_dev_info *bdi,
  506. struct wb_writeback_work *work)
  507. {
  508. long pages;
  509. /*
  510. * WB_SYNC_ALL mode does livelock avoidance by syncing dirty
  511. * inodes/pages in one big loop. Setting wbc.nr_to_write=LONG_MAX
  512. * here avoids calling into writeback_inodes_wb() more than once.
  513. *
  514. * The intended call sequence for WB_SYNC_ALL writeback is:
  515. *
  516. * wb_writeback()
  517. * writeback_sb_inodes() <== called only once
  518. * write_cache_pages() <== called once for each inode
  519. * (quickly) tag currently dirty pages
  520. * (maybe slowly) sync all tagged pages
  521. */
  522. if (work->sync_mode == WB_SYNC_ALL || work->tagged_writepages)
  523. pages = LONG_MAX;
  524. else {
  525. pages = min(bdi->avg_write_bandwidth / 2,
  526. global_dirty_limit / DIRTY_SCOPE);
  527. pages = min(pages, work->nr_pages);
  528. pages = round_down(pages + MIN_WRITEBACK_PAGES,
  529. MIN_WRITEBACK_PAGES);
  530. }
  531. return pages;
  532. }
  533. /*
  534. * Write a portion of b_io inodes which belong to @sb.
  535. *
  536. * Return the number of pages and/or inodes written.
  537. */
  538. static long writeback_sb_inodes(struct super_block *sb,
  539. struct bdi_writeback *wb,
  540. struct wb_writeback_work *work)
  541. {
  542. struct writeback_control wbc = {
  543. .sync_mode = work->sync_mode,
  544. .tagged_writepages = work->tagged_writepages,
  545. .for_kupdate = work->for_kupdate,
  546. .for_background = work->for_background,
  547. .for_sync = work->for_sync,
  548. .range_cyclic = work->range_cyclic,
  549. .range_start = 0,
  550. .range_end = LLONG_MAX,
  551. };
  552. unsigned long start_time = jiffies;
  553. long write_chunk;
  554. long wrote = 0; /* count both pages and inodes */
  555. while (!list_empty(&wb->b_io)) {
  556. struct inode *inode = wb_inode(wb->b_io.prev);
  557. if (inode->i_sb != sb) {
  558. if (work->sb) {
  559. /*
  560. * We only want to write back data for this
  561. * superblock, move all inodes not belonging
  562. * to it back onto the dirty list.
  563. */
  564. redirty_tail(inode, wb);
  565. continue;
  566. }
  567. /*
  568. * The inode belongs to a different superblock.
  569. * Bounce back to the caller to unpin this and
  570. * pin the next superblock.
  571. */
  572. break;
  573. }
  574. /*
  575. * Don't bother with new inodes or inodes being freed, first
  576. * kind does not need periodic writeout yet, and for the latter
  577. * kind writeout is handled by the freer.
  578. */
  579. spin_lock(&inode->i_lock);
  580. if (inode->i_state & (I_NEW | I_FREEING | I_WILL_FREE)) {
  581. spin_unlock(&inode->i_lock);
  582. redirty_tail(inode, wb);
  583. continue;
  584. }
  585. if ((inode->i_state & I_SYNC) && wbc.sync_mode != WB_SYNC_ALL) {
  586. /*
  587. * If this inode is locked for writeback and we are not
  588. * doing writeback-for-data-integrity, move it to
  589. * b_more_io so that writeback can proceed with the
  590. * other inodes on s_io.
  591. *
  592. * We'll have another go at writing back this inode
  593. * when we completed a full scan of b_io.
  594. */
  595. spin_unlock(&inode->i_lock);
  596. requeue_io(inode, wb);
  597. trace_writeback_sb_inodes_requeue(inode);
  598. continue;
  599. }
  600. spin_unlock(&wb->list_lock);
  601. /*
  602. * We already requeued the inode if it had I_SYNC set and we
  603. * are doing WB_SYNC_NONE writeback. So this catches only the
  604. * WB_SYNC_ALL case.
  605. */
  606. if (inode->i_state & I_SYNC) {
  607. /* Wait for I_SYNC. This function drops i_lock... */
  608. inode_sleep_on_writeback(inode);
  609. /* Inode may be gone, start again */
  610. spin_lock(&wb->list_lock);
  611. continue;
  612. }
  613. inode->i_state |= I_SYNC;
  614. spin_unlock(&inode->i_lock);
  615. write_chunk = writeback_chunk_size(wb->bdi, work);
  616. wbc.nr_to_write = write_chunk;
  617. wbc.pages_skipped = 0;
  618. /*
  619. * We use I_SYNC to pin the inode in memory. While it is set
  620. * evict_inode() will wait so the inode cannot be freed.
  621. */
  622. __writeback_single_inode(inode, &wbc);
  623. work->nr_pages -= write_chunk - wbc.nr_to_write;
  624. wrote += write_chunk - wbc.nr_to_write;
  625. spin_lock(&wb->list_lock);
  626. spin_lock(&inode->i_lock);
  627. if (!(inode->i_state & I_DIRTY))
  628. wrote++;
  629. requeue_inode(inode, wb, &wbc);
  630. inode_sync_complete(inode);
  631. spin_unlock(&inode->i_lock);
  632. cond_resched_lock(&wb->list_lock);
  633. /*
  634. * bail out to wb_writeback() often enough to check
  635. * background threshold and other termination conditions.
  636. */
  637. if (wrote) {
  638. if (time_is_before_jiffies(start_time + HZ / 10UL))
  639. break;
  640. if (work->nr_pages <= 0)
  641. break;
  642. }
  643. }
  644. return wrote;
  645. }
  646. static long __writeback_inodes_wb(struct bdi_writeback *wb,
  647. struct wb_writeback_work *work)
  648. {
  649. unsigned long start_time = jiffies;
  650. long wrote = 0;
  651. while (!list_empty(&wb->b_io)) {
  652. struct inode *inode = wb_inode(wb->b_io.prev);
  653. struct super_block *sb = inode->i_sb;
  654. if (!grab_super_passive(sb)) {
  655. /*
  656. * grab_super_passive() may fail consistently due to
  657. * s_umount being grabbed by someone else. Don't use
  658. * requeue_io() to avoid busy retrying the inode/sb.
  659. */
  660. redirty_tail(inode, wb);
  661. continue;
  662. }
  663. wrote += writeback_sb_inodes(sb, wb, work);
  664. drop_super(sb);
  665. /* refer to the same tests at the end of writeback_sb_inodes */
  666. if (wrote) {
  667. if (time_is_before_jiffies(start_time + HZ / 10UL))
  668. break;
  669. if (work->nr_pages <= 0)
  670. break;
  671. }
  672. }
  673. /* Leave any unwritten inodes on b_io */
  674. return wrote;
  675. }
  676. static long writeback_inodes_wb(struct bdi_writeback *wb, long nr_pages,
  677. enum wb_reason reason)
  678. {
  679. struct wb_writeback_work work = {
  680. .nr_pages = nr_pages,
  681. .sync_mode = WB_SYNC_NONE,
  682. .range_cyclic = 1,
  683. .reason = reason,
  684. };
  685. spin_lock(&wb->list_lock);
  686. if (list_empty(&wb->b_io))
  687. queue_io(wb, &work);
  688. __writeback_inodes_wb(wb, &work);
  689. spin_unlock(&wb->list_lock);
  690. return nr_pages - work.nr_pages;
  691. }
  692. static bool over_bground_thresh(struct backing_dev_info *bdi)
  693. {
  694. unsigned long background_thresh, dirty_thresh;
  695. global_dirty_limits(&background_thresh, &dirty_thresh);
  696. if (global_page_state(NR_FILE_DIRTY) +
  697. global_page_state(NR_UNSTABLE_NFS) > background_thresh)
  698. return true;
  699. if (bdi_stat(bdi, BDI_RECLAIMABLE) >
  700. bdi_dirty_limit(bdi, background_thresh))
  701. return true;
  702. return false;
  703. }
  704. /*
  705. * Called under wb->list_lock. If there are multiple wb per bdi,
  706. * only the flusher working on the first wb should do it.
  707. */
  708. static void wb_update_bandwidth(struct bdi_writeback *wb,
  709. unsigned long start_time)
  710. {
  711. __bdi_update_bandwidth(wb->bdi, 0, 0, 0, 0, 0, start_time);
  712. }
  713. /*
  714. * Explicit flushing or periodic writeback of "old" data.
  715. *
  716. * Define "old": the first time one of an inode's pages is dirtied, we mark the
  717. * dirtying-time in the inode's address_space. So this periodic writeback code
  718. * just walks the superblock inode list, writing back any inodes which are
  719. * older than a specific point in time.
  720. *
  721. * Try to run once per dirty_writeback_interval. But if a writeback event
  722. * takes longer than a dirty_writeback_interval interval, then leave a
  723. * one-second gap.
  724. *
  725. * older_than_this takes precedence over nr_to_write. So we'll only write back
  726. * all dirty pages if they are all attached to "old" mappings.
  727. */
  728. static long wb_writeback(struct bdi_writeback *wb,
  729. struct wb_writeback_work *work)
  730. {
  731. unsigned long wb_start = jiffies;
  732. long nr_pages = work->nr_pages;
  733. unsigned long oldest_jif;
  734. struct inode *inode;
  735. long progress;
  736. oldest_jif = jiffies;
  737. work->older_than_this = &oldest_jif;
  738. spin_lock(&wb->list_lock);
  739. for (;;) {
  740. /*
  741. * Stop writeback when nr_pages has been consumed
  742. */
  743. if (work->nr_pages <= 0)
  744. break;
  745. /*
  746. * Background writeout and kupdate-style writeback may
  747. * run forever. Stop them if there is other work to do
  748. * so that e.g. sync can proceed. They'll be restarted
  749. * after the other works are all done.
  750. */
  751. if ((work->for_background || work->for_kupdate) &&
  752. !list_empty(&wb->bdi->work_list))
  753. break;
  754. /*
  755. * For background writeout, stop when we are below the
  756. * background dirty threshold
  757. */
  758. if (work->for_background && !over_bground_thresh(wb->bdi))
  759. break;
  760. /*
  761. * Kupdate and background works are special and we want to
  762. * include all inodes that need writing. Livelock avoidance is
  763. * handled by these works yielding to any other work so we are
  764. * safe.
  765. */
  766. if (work->for_kupdate) {
  767. oldest_jif = jiffies -
  768. msecs_to_jiffies(dirty_expire_interval * 10);
  769. } else if (work->for_background)
  770. oldest_jif = jiffies;
  771. trace_writeback_start(wb->bdi, work);
  772. if (list_empty(&wb->b_io))
  773. queue_io(wb, work);
  774. if (work->sb)
  775. progress = writeback_sb_inodes(work->sb, wb, work);
  776. else
  777. progress = __writeback_inodes_wb(wb, work);
  778. trace_writeback_written(wb->bdi, work);
  779. wb_update_bandwidth(wb, wb_start);
  780. /*
  781. * Did we write something? Try for more
  782. *
  783. * Dirty inodes are moved to b_io for writeback in batches.
  784. * The completion of the current batch does not necessarily
  785. * mean the overall work is done. So we keep looping as long
  786. * as made some progress on cleaning pages or inodes.
  787. */
  788. if (progress)
  789. continue;
  790. /*
  791. * No more inodes for IO, bail
  792. */
  793. if (list_empty(&wb->b_more_io))
  794. break;
  795. /*
  796. * Nothing written. Wait for some inode to
  797. * become available for writeback. Otherwise
  798. * we'll just busyloop.
  799. */
  800. if (!list_empty(&wb->b_more_io)) {
  801. trace_writeback_wait(wb->bdi, work);
  802. inode = wb_inode(wb->b_more_io.prev);
  803. spin_lock(&inode->i_lock);
  804. spin_unlock(&wb->list_lock);
  805. /* This function drops i_lock... */
  806. inode_sleep_on_writeback(inode);
  807. spin_lock(&wb->list_lock);
  808. }
  809. }
  810. spin_unlock(&wb->list_lock);
  811. return nr_pages - work->nr_pages;
  812. }
  813. /*
  814. * Return the next wb_writeback_work struct that hasn't been processed yet.
  815. */
  816. static struct wb_writeback_work *
  817. get_next_work_item(struct backing_dev_info *bdi)
  818. {
  819. struct wb_writeback_work *work = NULL;
  820. spin_lock_bh(&bdi->wb_lock);
  821. if (!list_empty(&bdi->work_list)) {
  822. work = list_entry(bdi->work_list.next,
  823. struct wb_writeback_work, list);
  824. list_del_init(&work->list);
  825. }
  826. spin_unlock_bh(&bdi->wb_lock);
  827. return work;
  828. }
  829. /*
  830. * Add in the number of potentially dirty inodes, because each inode
  831. * write can dirty pagecache in the underlying blockdev.
  832. */
  833. static unsigned long get_nr_dirty_pages(void)
  834. {
  835. return global_page_state(NR_FILE_DIRTY) +
  836. global_page_state(NR_UNSTABLE_NFS) +
  837. get_nr_dirty_inodes();
  838. }
  839. static long wb_check_background_flush(struct bdi_writeback *wb)
  840. {
  841. if (over_bground_thresh(wb->bdi)) {
  842. struct wb_writeback_work work = {
  843. .nr_pages = LONG_MAX,
  844. .sync_mode = WB_SYNC_NONE,
  845. .for_background = 1,
  846. .range_cyclic = 1,
  847. .reason = WB_REASON_BACKGROUND,
  848. };
  849. return wb_writeback(wb, &work);
  850. }
  851. return 0;
  852. }
  853. static long wb_check_old_data_flush(struct bdi_writeback *wb)
  854. {
  855. unsigned long expired;
  856. long nr_pages;
  857. /*
  858. * When set to zero, disable periodic writeback
  859. */
  860. if (!dirty_writeback_interval)
  861. return 0;
  862. expired = wb->last_old_flush +
  863. msecs_to_jiffies(dirty_writeback_interval * 10);
  864. if (time_before(jiffies, expired))
  865. return 0;
  866. wb->last_old_flush = jiffies;
  867. nr_pages = get_nr_dirty_pages();
  868. if (nr_pages) {
  869. struct wb_writeback_work work = {
  870. .nr_pages = nr_pages,
  871. .sync_mode = WB_SYNC_NONE,
  872. .for_kupdate = 1,
  873. .range_cyclic = 1,
  874. .reason = WB_REASON_PERIODIC,
  875. };
  876. return wb_writeback(wb, &work);
  877. }
  878. return 0;
  879. }
  880. /*
  881. * Retrieve work items and do the writeback they describe
  882. */
  883. static long wb_do_writeback(struct bdi_writeback *wb)
  884. {
  885. struct backing_dev_info *bdi = wb->bdi;
  886. struct wb_writeback_work *work;
  887. long wrote = 0;
  888. set_bit(BDI_writeback_running, &wb->bdi->state);
  889. while ((work = get_next_work_item(bdi)) != NULL) {
  890. trace_writeback_exec(bdi, work);
  891. wrote += wb_writeback(wb, work);
  892. /*
  893. * Notify the caller of completion if this is a synchronous
  894. * work item, otherwise just free it.
  895. */
  896. if (work->done)
  897. complete(work->done);
  898. else
  899. kfree(work);
  900. }
  901. /*
  902. * Check for periodic writeback, kupdated() style
  903. */
  904. wrote += wb_check_old_data_flush(wb);
  905. wrote += wb_check_background_flush(wb);
  906. clear_bit(BDI_writeback_running, &wb->bdi->state);
  907. return wrote;
  908. }
  909. /*
  910. * Handle writeback of dirty data for the device backed by this bdi. Also
  911. * reschedules periodically and does kupdated style flushing.
  912. */
  913. void bdi_writeback_workfn(struct work_struct *work)
  914. {
  915. struct bdi_writeback *wb = container_of(to_delayed_work(work),
  916. struct bdi_writeback, dwork);
  917. struct backing_dev_info *bdi = wb->bdi;
  918. long pages_written;
  919. set_worker_desc("flush-%s", dev_name(bdi->dev));
  920. current->flags |= PF_SWAPWRITE;
  921. if (likely(!current_is_workqueue_rescuer() ||
  922. !test_bit(BDI_registered, &bdi->state))) {
  923. /*
  924. * The normal path. Keep writing back @bdi until its
  925. * work_list is empty. Note that this path is also taken
  926. * if @bdi is shutting down even when we're running off the
  927. * rescuer as work_list needs to be drained.
  928. */
  929. do {
  930. pages_written = wb_do_writeback(wb);
  931. trace_writeback_pages_written(pages_written);
  932. } while (!list_empty(&bdi->work_list));
  933. } else {
  934. /*
  935. * bdi_wq can't get enough workers and we're running off
  936. * the emergency worker. Don't hog it. Hopefully, 1024 is
  937. * enough for efficient IO.
  938. */
  939. pages_written = writeback_inodes_wb(&bdi->wb, 1024,
  940. WB_REASON_FORKER_THREAD);
  941. trace_writeback_pages_written(pages_written);
  942. }
  943. if (!list_empty(&bdi->work_list))
  944. mod_delayed_work(bdi_wq, &wb->dwork, 0);
  945. else if (wb_has_dirty_io(wb) && dirty_writeback_interval)
  946. bdi_wakeup_thread_delayed(bdi);
  947. current->flags &= ~PF_SWAPWRITE;
  948. }
  949. /*
  950. * Start writeback of `nr_pages' pages. If `nr_pages' is zero, write back
  951. * the whole world.
  952. */
  953. void wakeup_flusher_threads(long nr_pages, enum wb_reason reason)
  954. {
  955. struct backing_dev_info *bdi;
  956. if (!nr_pages)
  957. nr_pages = get_nr_dirty_pages();
  958. rcu_read_lock();
  959. list_for_each_entry_rcu(bdi, &bdi_list, bdi_list) {
  960. if (!bdi_has_dirty_io(bdi))
  961. continue;
  962. __bdi_start_writeback(bdi, nr_pages, false, reason);
  963. }
  964. rcu_read_unlock();
  965. }
  966. static noinline void block_dump___mark_inode_dirty(struct inode *inode)
  967. {
  968. if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) {
  969. struct dentry *dentry;
  970. const char *name = "?";
  971. dentry = d_find_alias(inode);
  972. if (dentry) {
  973. spin_lock(&dentry->d_lock);
  974. name = (const char *) dentry->d_name.name;
  975. }
  976. printk(KERN_DEBUG
  977. "%s(%d): dirtied inode %lu (%s) on %s\n",
  978. current->comm, task_pid_nr(current), inode->i_ino,
  979. name, inode->i_sb->s_id);
  980. if (dentry) {
  981. spin_unlock(&dentry->d_lock);
  982. dput(dentry);
  983. }
  984. }
  985. }
  986. /**
  987. * __mark_inode_dirty - internal function
  988. * @inode: inode to mark
  989. * @flags: what kind of dirty (i.e. I_DIRTY_SYNC)
  990. * Mark an inode as dirty. Callers should use mark_inode_dirty or
  991. * mark_inode_dirty_sync.
  992. *
  993. * Put the inode on the super block's dirty list.
  994. *
  995. * CAREFUL! We mark it dirty unconditionally, but move it onto the
  996. * dirty list only if it is hashed or if it refers to a blockdev.
  997. * If it was not hashed, it will never be added to the dirty list
  998. * even if it is later hashed, as it will have been marked dirty already.
  999. *
  1000. * In short, make sure you hash any inodes _before_ you start marking
  1001. * them dirty.
  1002. *
  1003. * Note that for blockdevs, inode->dirtied_when represents the dirtying time of
  1004. * the block-special inode (/dev/hda1) itself. And the ->dirtied_when field of
  1005. * the kernel-internal blockdev inode represents the dirtying time of the
  1006. * blockdev's pages. This is why for I_DIRTY_PAGES we always use
  1007. * page->mapping->host, so the page-dirtying time is recorded in the internal
  1008. * blockdev inode.
  1009. */
  1010. void __mark_inode_dirty(struct inode *inode, int flags)
  1011. {
  1012. struct super_block *sb = inode->i_sb;
  1013. struct backing_dev_info *bdi = NULL;
  1014. /*
  1015. * Don't do this for I_DIRTY_PAGES - that doesn't actually
  1016. * dirty the inode itself
  1017. */
  1018. if (flags & (I_DIRTY_SYNC | I_DIRTY_DATASYNC)) {
  1019. trace_writeback_dirty_inode_start(inode, flags);
  1020. if (sb->s_op->dirty_inode)
  1021. sb->s_op->dirty_inode(inode, flags);
  1022. trace_writeback_dirty_inode(inode, flags);
  1023. }
  1024. /*
  1025. * make sure that changes are seen by all cpus before we test i_state
  1026. * -- mikulas
  1027. */
  1028. smp_mb();
  1029. /* avoid the locking if we can */
  1030. if ((inode->i_state & flags) == flags)
  1031. return;
  1032. if (unlikely(block_dump))
  1033. block_dump___mark_inode_dirty(inode);
  1034. spin_lock(&inode->i_lock);
  1035. if ((inode->i_state & flags) != flags) {
  1036. const int was_dirty = inode->i_state & I_DIRTY;
  1037. inode->i_state |= flags;
  1038. /*
  1039. * If the inode is being synced, just update its dirty state.
  1040. * The unlocker will place the inode on the appropriate
  1041. * superblock list, based upon its state.
  1042. */
  1043. if (inode->i_state & I_SYNC)
  1044. goto out_unlock_inode;
  1045. /*
  1046. * Only add valid (hashed) inodes to the superblock's
  1047. * dirty list. Add blockdev inodes as well.
  1048. */
  1049. if (!S_ISBLK(inode->i_mode)) {
  1050. if (inode_unhashed(inode))
  1051. goto out_unlock_inode;
  1052. }
  1053. if (inode->i_state & I_FREEING)
  1054. goto out_unlock_inode;
  1055. /*
  1056. * If the inode was already on b_dirty/b_io/b_more_io, don't
  1057. * reposition it (that would break b_dirty time-ordering).
  1058. */
  1059. if (!was_dirty) {
  1060. bool wakeup_bdi = false;
  1061. bdi = inode_to_bdi(inode);
  1062. spin_unlock(&inode->i_lock);
  1063. spin_lock(&bdi->wb.list_lock);
  1064. if (bdi_cap_writeback_dirty(bdi)) {
  1065. WARN(!test_bit(BDI_registered, &bdi->state),
  1066. "bdi-%s not registered\n", bdi->name);
  1067. /*
  1068. * If this is the first dirty inode for this
  1069. * bdi, we have to wake-up the corresponding
  1070. * bdi thread to make sure background
  1071. * write-back happens later.
  1072. */
  1073. if (!wb_has_dirty_io(&bdi->wb))
  1074. wakeup_bdi = true;
  1075. }
  1076. inode->dirtied_when = jiffies;
  1077. list_move(&inode->i_wb_list, &bdi->wb.b_dirty);
  1078. spin_unlock(&bdi->wb.list_lock);
  1079. if (wakeup_bdi)
  1080. bdi_wakeup_thread_delayed(bdi);
  1081. return;
  1082. }
  1083. }
  1084. out_unlock_inode:
  1085. spin_unlock(&inode->i_lock);
  1086. }
  1087. EXPORT_SYMBOL(__mark_inode_dirty);
  1088. static void wait_sb_inodes(struct super_block *sb)
  1089. {
  1090. struct inode *inode, *old_inode = NULL;
  1091. /*
  1092. * We need to be protected against the filesystem going from
  1093. * r/o to r/w or vice versa.
  1094. */
  1095. WARN_ON(!rwsem_is_locked(&sb->s_umount));
  1096. spin_lock(&inode_sb_list_lock);
  1097. /*
  1098. * Data integrity sync. Must wait for all pages under writeback,
  1099. * because there may have been pages dirtied before our sync
  1100. * call, but which had writeout started before we write it out.
  1101. * In which case, the inode may not be on the dirty list, but
  1102. * we still have to wait for that writeout.
  1103. */
  1104. list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
  1105. struct address_space *mapping = inode->i_mapping;
  1106. spin_lock(&inode->i_lock);
  1107. if ((inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) ||
  1108. (mapping->nrpages == 0)) {
  1109. spin_unlock(&inode->i_lock);
  1110. continue;
  1111. }
  1112. __iget(inode);
  1113. spin_unlock(&inode->i_lock);
  1114. spin_unlock(&inode_sb_list_lock);
  1115. /*
  1116. * We hold a reference to 'inode' so it couldn't have been
  1117. * removed from s_inodes list while we dropped the
  1118. * inode_sb_list_lock. We cannot iput the inode now as we can
  1119. * be holding the last reference and we cannot iput it under
  1120. * inode_sb_list_lock. So we keep the reference and iput it
  1121. * later.
  1122. */
  1123. iput(old_inode);
  1124. old_inode = inode;
  1125. filemap_fdatawait(mapping);
  1126. cond_resched();
  1127. spin_lock(&inode_sb_list_lock);
  1128. }
  1129. spin_unlock(&inode_sb_list_lock);
  1130. iput(old_inode);
  1131. }
  1132. /**
  1133. * writeback_inodes_sb_nr - writeback dirty inodes from given super_block
  1134. * @sb: the superblock
  1135. * @nr: the number of pages to write
  1136. * @reason: reason why some writeback work initiated
  1137. *
  1138. * Start writeback on some inodes on this super_block. No guarantees are made
  1139. * on how many (if any) will be written, and this function does not wait
  1140. * for IO completion of submitted IO.
  1141. */
  1142. void writeback_inodes_sb_nr(struct super_block *sb,
  1143. unsigned long nr,
  1144. enum wb_reason reason)
  1145. {
  1146. DECLARE_COMPLETION_ONSTACK(done);
  1147. struct wb_writeback_work work = {
  1148. .sb = sb,
  1149. .sync_mode = WB_SYNC_NONE,
  1150. .tagged_writepages = 1,
  1151. .done = &done,
  1152. .nr_pages = nr,
  1153. .reason = reason,
  1154. };
  1155. if (sb->s_bdi == &noop_backing_dev_info)
  1156. return;
  1157. WARN_ON(!rwsem_is_locked(&sb->s_umount));
  1158. bdi_queue_work(sb->s_bdi, &work);
  1159. wait_for_completion(&done);
  1160. }
  1161. EXPORT_SYMBOL(writeback_inodes_sb_nr);
  1162. /**
  1163. * writeback_inodes_sb - writeback dirty inodes from given super_block
  1164. * @sb: the superblock
  1165. * @reason: reason why some writeback work was initiated
  1166. *
  1167. * Start writeback on some inodes on this super_block. No guarantees are made
  1168. * on how many (if any) will be written, and this function does not wait
  1169. * for IO completion of submitted IO.
  1170. */
  1171. void writeback_inodes_sb(struct super_block *sb, enum wb_reason reason)
  1172. {
  1173. return writeback_inodes_sb_nr(sb, get_nr_dirty_pages(), reason);
  1174. }
  1175. EXPORT_SYMBOL(writeback_inodes_sb);
  1176. /**
  1177. * try_to_writeback_inodes_sb_nr - try to start writeback if none underway
  1178. * @sb: the superblock
  1179. * @nr: the number of pages to write
  1180. * @reason: the reason of writeback
  1181. *
  1182. * Invoke writeback_inodes_sb_nr if no writeback is currently underway.
  1183. * Returns 1 if writeback was started, 0 if not.
  1184. */
  1185. int try_to_writeback_inodes_sb_nr(struct super_block *sb,
  1186. unsigned long nr,
  1187. enum wb_reason reason)
  1188. {
  1189. if (writeback_in_progress(sb->s_bdi))
  1190. return 1;
  1191. if (!down_read_trylock(&sb->s_umount))
  1192. return 0;
  1193. writeback_inodes_sb_nr(sb, nr, reason);
  1194. up_read(&sb->s_umount);
  1195. return 1;
  1196. }
  1197. EXPORT_SYMBOL(try_to_writeback_inodes_sb_nr);
  1198. /**
  1199. * try_to_writeback_inodes_sb - try to start writeback if none underway
  1200. * @sb: the superblock
  1201. * @reason: reason why some writeback work was initiated
  1202. *
  1203. * Implement by try_to_writeback_inodes_sb_nr()
  1204. * Returns 1 if writeback was started, 0 if not.
  1205. */
  1206. int try_to_writeback_inodes_sb(struct super_block *sb, enum wb_reason reason)
  1207. {
  1208. return try_to_writeback_inodes_sb_nr(sb, get_nr_dirty_pages(), reason);
  1209. }
  1210. EXPORT_SYMBOL(try_to_writeback_inodes_sb);
  1211. /**
  1212. * sync_inodes_sb - sync sb inode pages
  1213. * @sb: the superblock
  1214. *
  1215. * This function writes and waits on any dirty inode belonging to this
  1216. * super_block.
  1217. */
  1218. void sync_inodes_sb(struct super_block *sb)
  1219. {
  1220. DECLARE_COMPLETION_ONSTACK(done);
  1221. struct wb_writeback_work work = {
  1222. .sb = sb,
  1223. .sync_mode = WB_SYNC_ALL,
  1224. .nr_pages = LONG_MAX,
  1225. .range_cyclic = 0,
  1226. .done = &done,
  1227. .reason = WB_REASON_SYNC,
  1228. .for_sync = 1,
  1229. };
  1230. /* Nothing to do? */
  1231. if (sb->s_bdi == &noop_backing_dev_info)
  1232. return;
  1233. WARN_ON(!rwsem_is_locked(&sb->s_umount));
  1234. bdi_queue_work(sb->s_bdi, &work);
  1235. wait_for_completion(&done);
  1236. wait_sb_inodes(sb);
  1237. }
  1238. EXPORT_SYMBOL(sync_inodes_sb);
  1239. /**
  1240. * write_inode_now - write an inode to disk
  1241. * @inode: inode to write to disk
  1242. * @sync: whether the write should be synchronous or not
  1243. *
  1244. * This function commits an inode to disk immediately if it is dirty. This is
  1245. * primarily needed by knfsd.
  1246. *
  1247. * The caller must either have a ref on the inode or must have set I_WILL_FREE.
  1248. */
  1249. int write_inode_now(struct inode *inode, int sync)
  1250. {
  1251. struct bdi_writeback *wb = &inode_to_bdi(inode)->wb;
  1252. struct writeback_control wbc = {
  1253. .nr_to_write = LONG_MAX,
  1254. .sync_mode = sync ? WB_SYNC_ALL : WB_SYNC_NONE,
  1255. .range_start = 0,
  1256. .range_end = LLONG_MAX,
  1257. };
  1258. if (!mapping_cap_writeback_dirty(inode->i_mapping))
  1259. wbc.nr_to_write = 0;
  1260. might_sleep();
  1261. return writeback_single_inode(inode, wb, &wbc);
  1262. }
  1263. EXPORT_SYMBOL(write_inode_now);
  1264. /**
  1265. * sync_inode - write an inode and its pages to disk.
  1266. * @inode: the inode to sync
  1267. * @wbc: controls the writeback mode
  1268. *
  1269. * sync_inode() will write an inode and its pages to disk. It will also
  1270. * correctly update the inode on its superblock's dirty inode lists and will
  1271. * update inode->i_state.
  1272. *
  1273. * The caller must have a ref on the inode.
  1274. */
  1275. int sync_inode(struct inode *inode, struct writeback_control *wbc)
  1276. {
  1277. return writeback_single_inode(inode, &inode_to_bdi(inode)->wb, wbc);
  1278. }
  1279. EXPORT_SYMBOL(sync_inode);
  1280. /**
  1281. * sync_inode_metadata - write an inode to disk
  1282. * @inode: the inode to sync
  1283. * @wait: wait for I/O to complete.
  1284. *
  1285. * Write an inode to disk and adjust its dirty state after completion.
  1286. *
  1287. * Note: only writes the actual inode, no associated data or other metadata.
  1288. */
  1289. int sync_inode_metadata(struct inode *inode, int wait)
  1290. {
  1291. struct writeback_control wbc = {
  1292. .sync_mode = wait ? WB_SYNC_ALL : WB_SYNC_NONE,
  1293. .nr_to_write = 0, /* metadata-only */
  1294. };
  1295. return sync_inode(inode, &wbc);
  1296. }
  1297. EXPORT_SYMBOL(sync_inode_metadata);