linux_kernel/drivers/input/touchscreen/stmfts.c

/*
 * Copyright (c) 2017 Samsung Electronics Co., Ltd.
 * Author: Andi Shyti <andi.shyti@samsung.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * STMicroelectronics FTS Touchscreen device driver
 */

#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/input/mt.h>
#include <linux/input/touchscreen.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>

/* I2C commands */
#define STMFTS_READ_INFO			0x80
#define STMFTS_READ_STATUS			0x84
#define STMFTS_READ_ONE_EVENT			0x85
#define STMFTS_READ_ALL_EVENT			0x86
#define STMFTS_LATEST_EVENT			0x87
#define STMFTS_SLEEP_IN				0x90
#define STMFTS_SLEEP_OUT			0x91
#define STMFTS_MS_MT_SENSE_OFF			0x92
#define STMFTS_MS_MT_SENSE_ON			0x93
#define STMFTS_SS_HOVER_SENSE_OFF		0x94
#define STMFTS_SS_HOVER_SENSE_ON		0x95
#define STMFTS_MS_KEY_SENSE_OFF			0x9a
#define STMFTS_MS_KEY_SENSE_ON			0x9b
#define STMFTS_SYSTEM_RESET			0xa0
#define STMFTS_CLEAR_EVENT_STACK		0xa1
#define STMFTS_FULL_FORCE_CALIBRATION		0xa2
#define STMFTS_MS_CX_TUNING			0xa3
#define STMFTS_SS_CX_TUNING			0xa4

/* events */
#define STMFTS_EV_NO_EVENT			0x00
#define STMFTS_EV_MULTI_TOUCH_DETECTED		0x02
#define STMFTS_EV_MULTI_TOUCH_ENTER		0x03
#define STMFTS_EV_MULTI_TOUCH_LEAVE		0x04
#define STMFTS_EV_MULTI_TOUCH_MOTION		0x05
#define STMFTS_EV_HOVER_ENTER			0x07
#define STMFTS_EV_HOVER_LEAVE			0x08
#define STMFTS_EV_HOVER_MOTION			0x09
#define STMFTS_EV_KEY_STATUS			0x0e
#define STMFTS_EV_ERROR				0x0f
#define STMFTS_EV_CONTROLLER_READY		0x10
#define STMFTS_EV_SLEEP_OUT_CONTROLLER_READY	0x11
#define STMFTS_EV_STATUS			0x16
#define STMFTS_EV_DEBUG				0xdb

/* multi touch related event masks */
#define STMFTS_MASK_EVENT_ID			0x0f
#define STMFTS_MASK_TOUCH_ID			0xf0
#define STMFTS_MASK_LEFT_EVENT			0x0f
#define STMFTS_MASK_X_MSB			0x0f
#define STMFTS_MASK_Y_LSB			0xf0

/* key related event masks */
#define STMFTS_MASK_KEY_NO_TOUCH		0x00
#define STMFTS_MASK_KEY_MENU			0x01
#define STMFTS_MASK_KEY_BACK			0x02

#define STMFTS_EVENT_SIZE	8
#define STMFTS_STACK_DEPTH	32
#define STMFTS_DATA_MAX_SIZE	(STMFTS_EVENT_SIZE * STMFTS_STACK_DEPTH)
#define STMFTS_MAX_FINGERS	10
#define STMFTS_DEV_NAME		"stmfts"

enum stmfts_regulators {
	STMFTS_REGULATOR_VDD,
	STMFTS_REGULATOR_AVDD,
};

struct stmfts_data {
	struct i2c_client *client;
	struct input_dev *input;
	struct led_classdev led_cdev;
	struct mutex mutex;

	struct touchscreen_properties prop;

	struct regulator_bulk_data regulators[2];

	/*
	 * Presence of ledvdd will be used also to check
	 * whether the LED is supported.
	 */
	struct regulator *ledvdd;

	u16 chip_id;
	u8 chip_ver;
	u16 fw_ver;
	u8 config_id;
	u8 config_ver;

	u8 data[STMFTS_DATA_MAX_SIZE];

	struct completion cmd_done;

	bool use_key;
	bool led_status;
	bool hover_enabled;
	bool running;
};

static void stmfts_brightness_set(struct led_classdev *led_cdev,
					enum led_brightness value)
{
	struct stmfts_data *sdata = container_of(led_cdev,
					struct stmfts_data, led_cdev);
	int err;

	if (value == sdata->led_status || !sdata->ledvdd)
		return;

	if (!value) {
		regulator_disable(sdata->ledvdd);
	} else {
		err = regulator_enable(sdata->ledvdd);
		if (err)
			dev_warn(&sdata->client->dev,
				 "failed to disable ledvdd regulator: %d\n",
				 err);
	}

	sdata->led_status = value;
}

static enum led_brightness stmfts_brightness_get(struct led_classdev *led_cdev)
{
	struct stmfts_data *sdata = container_of(led_cdev,
						struct stmfts_data, led_cdev);

	return !!regulator_is_enabled(sdata->ledvdd);
}

/*
 * We can't simply use i2c_smbus_read_i2c_block_data because we
 * need to read more than 255 bytes (
 */
static int stmfts_read_events(struct stmfts_data *sdata)
{
	u8 cmd = STMFTS_READ_ALL_EVENT;
	struct i2c_msg msgs[2] = {
		{
			.addr	= sdata->client->addr,
			.len	= 1,
			.buf	= &cmd,
		},
		{
			.addr	= sdata->client->addr,
			.flags	= I2C_M_RD,
			.len	= STMFTS_DATA_MAX_SIZE,
			.buf	= sdata->data,
		},
	};
	int ret;

	ret = i2c_transfer(sdata->client->adapter, msgs, ARRAY_SIZE(msgs));
	if (ret < 0)
		return ret;

	return ret == ARRAY_SIZE(msgs) ? 0 : -EIO;
}

static void stmfts_report_contact_event(struct stmfts_data *sdata,
					const u8 event[])
{
	u8 slot_id = (event[0] & STMFTS_MASK_TOUCH_ID) >> 4;
	u16 x = event[1] | ((event[2] & STMFTS_MASK_X_MSB) << 8);
	u16 y = (event[2] >> 4) | (event[3] << 4);
	u8 maj = event[4];
	u8 min = event[5];
	u8 orientation = event[6];
	u8 area = event[7];

	input_mt_slot(sdata->input, slot_id);

	input_mt_report_slot_state(sdata->input, MT_TOOL_FINGER, true);
	input_report_abs(sdata->input, ABS_MT_POSITION_X, x);
	input_report_abs(sdata->input, ABS_MT_POSITION_Y, y);
	input_report_abs(sdata->input, ABS_MT_TOUCH_MAJOR, maj);
	input_report_abs(sdata->input, ABS_MT_TOUCH_MINOR, min);
	input_report_abs(sdata->input, ABS_MT_PRESSURE, area);
	input_report_abs(sdata->input, ABS_MT_ORIENTATION, orientation);

	input_sync(sdata->input);
}

static void stmfts_report_contact_release(struct stmfts_data *sdata,
					  const u8 event[])
{
	u8 slot_id = (event[0] & STMFTS_MASK_TOUCH_ID) >> 4;

	input_mt_slot(sdata->input, slot_id);
	input_mt_report_slot_state(sdata->input, MT_TOOL_FINGER, false);

	input_sync(sdata->input);
}

static void stmfts_report_hover_event(struct stmfts_data *sdata,
				      const u8 event[])
{
	u16 x = (event[2] << 4) | (event[4] >> 4);
	u16 y = (event[3] << 4) | (event[4] & STMFTS_MASK_Y_LSB);
	u8 z = event[5];

	input_report_abs(sdata->input, ABS_X, x);
	input_report_abs(sdata->input, ABS_Y, y);
	input_report_abs(sdata->input, ABS_DISTANCE, z);

	input_sync(sdata->input);
}

static void stmfts_report_key_event(struct stmfts_data *sdata, const u8 event[])
{
	switch (event[2]) {
	case 0:
		input_report_key(sdata->input, KEY_BACK, 0);
		input_report_key(sdata->input, KEY_MENU, 0);
		break;

	case STMFTS_MASK_KEY_BACK:
		input_report_key(sdata->input, KEY_BACK, 1);
		break;

	case STMFTS_MASK_KEY_MENU:
		input_report_key(sdata->input, KEY_MENU, 1);
		break;

	default:
		dev_warn(&sdata->client->dev,
			 "unknown key event: %#02x\n", event[2]);
		break;
	}

	input_sync(sdata->input);
}

static void stmfts_parse_events(struct stmfts_data *sdata)
{
	int i;

	for (i = 0; i < STMFTS_STACK_DEPTH; i++) {
		u8 *event = &sdata->data[i * STMFTS_EVENT_SIZE];

		switch (event[0]) {

		case STMFTS_EV_CONTROLLER_READY:
		case STMFTS_EV_SLEEP_OUT_CONTROLLER_READY:
		case STMFTS_EV_STATUS:
			complete(&sdata->cmd_done);
			/* fall through */

		case STMFTS_EV_NO_EVENT:
		case STMFTS_EV_DEBUG:
			return;
		}

		switch (event[0] & STMFTS_MASK_EVENT_ID) {

		case STMFTS_EV_MULTI_TOUCH_ENTER:
		case STMFTS_EV_MULTI_TOUCH_MOTION:
			stmfts_report_contact_event(sdata, event);
			break;

		case STMFTS_EV_MULTI_TOUCH_LEAVE:
			stmfts_report_contact_release(sdata, event);
			break;

		case STMFTS_EV_HOVER_ENTER:
		case STMFTS_EV_HOVER_LEAVE:
		case STMFTS_EV_HOVER_MOTION:
			stmfts_report_hover_event(sdata, event);
			break;

		case STMFTS_EV_KEY_STATUS:
			stmfts_report_key_event(sdata, event);
			break;

		case STMFTS_EV_ERROR:
			dev_warn(&sdata->client->dev,
					"error code: 0x%x%x%x%x%x%x",
					event[6], event[5], event[4],
					event[3], event[2], event[1]);
			break;

		default:
			dev_err(&sdata->client->dev,
				"unknown event %#02x\n", event[0]);
		}
	}
}

static irqreturn_t stmfts_irq_handler(int irq, void *dev)
{
	struct stmfts_data *sdata = dev;
	int err;

	mutex_lock(&sdata->mutex);

	err = stmfts_read_events(sdata);
	if (unlikely(err))
		dev_err(&sdata->client->dev,
			"failed to read events: %d\n", err);
	else
		stmfts_parse_events(sdata);

	mutex_unlock(&sdata->mutex);
	return IRQ_HANDLED;
}

static int stmfts_command(struct stmfts_data *sdata, const u8 cmd)
{
	int err;

	reinit_completion(&sdata->cmd_done);

	err = i2c_smbus_write_byte(sdata->client, cmd);
	if (err)
		return err;

	if (!wait_for_completion_timeout(&sdata->cmd_done,
					 msecs_to_jiffies(1000)))
		return -ETIMEDOUT;

	return 0;
}

static int stmfts_input_open(struct input_dev *dev)
{
	struct stmfts_data *sdata = input_get_drvdata(dev);
	int err;

	err = pm_runtime_get_sync(&sdata->client->dev);
	if (err < 0)
		return err;

	err = i2c_smbus_write_byte(sdata->client, STMFTS_MS_MT_SENSE_ON);
	if (err)
		return err;

	mutex_lock(&sdata->mutex);
	sdata->running = true;

	if (sdata->hover_enabled) {
		err = i2c_smbus_write_byte(sdata->client,
					   STMFTS_SS_HOVER_SENSE_ON);
		if (err)
			dev_warn(&sdata->client->dev,
				 "failed to enable hover\n");
	}
	mutex_unlock(&sdata->mutex);

	if (sdata->use_key) {
		err = i2c_smbus_write_byte(sdata->client,
					   STMFTS_MS_KEY_SENSE_ON);
		if (err)
			/* I can still use only the touch screen */
			dev_warn(&sdata->client->dev,
				 "failed to enable touchkey\n");
	}

	return 0;
}

static void stmfts_input_close(struct input_dev *dev)
{
	struct stmfts_data *sdata = input_get_drvdata(dev);
	int err;

	err = i2c_smbus_write_byte(sdata->client, STMFTS_MS_MT_SENSE_OFF);
	if (err)
		dev_warn(&sdata->client->dev,
			 "failed to disable touchscreen: %d\n", err);

	mutex_lock(&sdata->mutex);

	sdata->running = false;

	if (sdata->hover_enabled) {
		err = i2c_smbus_write_byte(sdata->client,
					   STMFTS_SS_HOVER_SENSE_OFF);
		if (err)
			dev_warn(&sdata->client->dev,
				 "failed to disable hover: %d\n", err);
	}
	mutex_unlock(&sdata->mutex);

	if (sdata->use_key) {
		err = i2c_smbus_write_byte(sdata->client,
					   STMFTS_MS_KEY_SENSE_OFF);
		if (err)
			dev_warn(&sdata->client->dev,
				 "failed to disable touchkey: %d\n", err);
	}

	pm_runtime_put_sync(&sdata->client->dev);
}

static ssize_t stmfts_sysfs_chip_id(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	struct stmfts_data *sdata = dev_get_drvdata(dev);

	return sprintf(buf, "%#x\n", sdata->chip_id);
}

static ssize_t stmfts_sysfs_chip_version(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	struct stmfts_data *sdata = dev_get_drvdata(dev);

	return sprintf(buf, "%u\n", sdata->chip_ver);
}

static ssize_t stmfts_sysfs_fw_ver(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	struct stmfts_data *sdata = dev_get_drvdata(dev);

	return sprintf(buf, "%u\n", sdata->fw_ver);
}

static ssize_t stmfts_sysfs_config_id(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	struct stmfts_data *sdata = dev_get_drvdata(dev);

	return sprintf(buf, "%#x\n", sdata->config_id);
}

static ssize_t stmfts_sysfs_config_version(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	struct stmfts_data *sdata = dev_get_drvdata(dev);

	return sprintf(buf, "%u\n", sdata->config_ver);
}

static ssize_t stmfts_sysfs_read_status(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	struct stmfts_data *sdata = dev_get_drvdata(dev);
	u8 status[4];
	int err;

	err = i2c_smbus_read_i2c_block_data(sdata->client, STMFTS_READ_STATUS,
					    sizeof(status), status);
	if (err)
		return err;

	return sprintf(buf, "%#02x\n", status[0]);
}

static ssize_t stmfts_sysfs_hover_enable_read(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	struct stmfts_data *sdata = dev_get_drvdata(dev);

	return sprintf(buf, "%u\n", sdata->hover_enabled);
}

static ssize_t stmfts_sysfs_hover_enable_write(struct device *dev,
				struct device_attribute *attr,
				const char *buf, size_t len)
{
	struct stmfts_data *sdata = dev_get_drvdata(dev);
	unsigned long value;
	int err = 0;

	if (kstrtoul(buf, 0, &value))
		return -EINVAL;

	mutex_lock(&sdata->mutex);

	if (value & sdata->hover_enabled)
		goto out;

	if (sdata->running)
		err = i2c_smbus_write_byte(sdata->client,
					   value ? STMFTS_SS_HOVER_SENSE_ON :
						   STMFTS_SS_HOVER_SENSE_OFF);

	if (!err)
		sdata->hover_enabled = !!value;

out:
	mutex_unlock(&sdata->mutex);

	return len;
}

static DEVICE_ATTR(chip_id, 0444, stmfts_sysfs_chip_id, NULL);
static DEVICE_ATTR(chip_version, 0444, stmfts_sysfs_chip_version, NULL);
static DEVICE_ATTR(fw_ver, 0444, stmfts_sysfs_fw_ver, NULL);
static DEVICE_ATTR(config_id, 0444, stmfts_sysfs_config_id, NULL);
static DEVICE_ATTR(config_version, 0444, stmfts_sysfs_config_version, NULL);
static DEVICE_ATTR(status, 0444, stmfts_sysfs_read_status, NULL);
static DEVICE_ATTR(hover_enable, 0644, stmfts_sysfs_hover_enable_read,
					stmfts_sysfs_hover_enable_write);

static struct attribute *stmfts_sysfs_attrs[] = {
	&dev_attr_chip_id.attr,
	&dev_attr_chip_version.attr,
	&dev_attr_fw_ver.attr,
	&dev_attr_config_id.attr,
	&dev_attr_config_version.attr,
	&dev_attr_status.attr,
	&dev_attr_hover_enable.attr,
	NULL
};

static struct attribute_group stmfts_attribute_group = {
	.attrs = stmfts_sysfs_attrs
};

static int stmfts_power_on(struct stmfts_data *sdata)
{
	int err;
	u8 reg[8];

	err = regulator_bulk_enable(ARRAY_SIZE(sdata->regulators),
				    sdata->regulators);
	if (err)
		return err;

	/*
	 * The datasheet does not specify the power on time, but considering
	 * that the reset time is < 10ms, I sleep 20ms to be sure
	 */
	msleep(20);

	err = i2c_smbus_read_i2c_block_data(sdata->client, STMFTS_READ_INFO,
					    sizeof(reg), reg);
	if (err < 0)
		return err;
	if (err != sizeof(reg))
		return -EIO;

	sdata->chip_id = be16_to_cpup((__be16 *)&reg[6]);
	sdata->chip_ver = reg[0];
	sdata->fw_ver = be16_to_cpup((__be16 *)&reg[2]);
	sdata->config_id = reg[4];
	sdata->config_ver = reg[5];

	enable_irq(sdata->client->irq);

	msleep(50);

	err = stmfts_command(sdata, STMFTS_SYSTEM_RESET);
	if (err)
		return err;

	err = stmfts_command(sdata, STMFTS_SLEEP_OUT);
	if (err)
		return err;

	/* optional tuning */
	err = stmfts_command(sdata, STMFTS_MS_CX_TUNING);
	if (err)
		dev_warn(&sdata->client->dev,
			 "failed to perform mutual auto tune: %d\n", err);

	/* optional tuning */
	err = stmfts_command(sdata, STMFTS_SS_CX_TUNING);
	if (err)
		dev_warn(&sdata->client->dev,
			 "failed to perform self auto tune: %d\n", err);

	err = stmfts_command(sdata, STMFTS_FULL_FORCE_CALIBRATION);
	if (err)
		return err;

	/*
	 * At this point no one is using the touchscreen
	 * and I don't really care about the return value
	 */
	(void) i2c_smbus_write_byte(sdata->client, STMFTS_SLEEP_IN);

	return 0;
}

static void stmfts_power_off(void *data)
{
	struct stmfts_data *sdata = data;

	disable_irq(sdata->client->irq);
	regulator_bulk_disable(ARRAY_SIZE(sdata->regulators),
						sdata->regulators);
}

/* This function is void because I don't want to prevent using the touch key
 * only because the LEDs don't get registered
 */
static int stmfts_enable_led(struct stmfts_data *sdata)
{
	int err;

	/* get the regulator for powering the leds on */
	sdata->ledvdd = devm_regulator_get(&sdata->client->dev, "ledvdd");
	if (IS_ERR(sdata->ledvdd))
		return PTR_ERR(sdata->ledvdd);

	sdata->led_cdev.name = STMFTS_DEV_NAME;
	sdata->led_cdev.max_brightness = LED_ON;
	sdata->led_cdev.brightness = LED_OFF;
	sdata->led_cdev.brightness_set = stmfts_brightness_set;
	sdata->led_cdev.brightness_get = stmfts_brightness_get;

	err = devm_led_classdev_register(&sdata->client->dev, &sdata->led_cdev);
	if (err) {
		devm_regulator_put(sdata->ledvdd);
		return err;
	}

	return 0;
}

static int stmfts_probe(struct i2c_client *client,
			const struct i2c_device_id *id)
{
	int err;
	struct stmfts_data *sdata;

	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
						I2C_FUNC_SMBUS_BYTE_DATA |
						I2C_FUNC_SMBUS_I2C_BLOCK))
		return -ENODEV;

	sdata = devm_kzalloc(&client->dev, sizeof(*sdata), GFP_KERNEL);
	if (!sdata)
		return -ENOMEM;

	i2c_set_clientdata(client, sdata);

	sdata->client = client;
	mutex_init(&sdata->mutex);
	init_completion(&sdata->cmd_done);

	sdata->regulators[STMFTS_REGULATOR_VDD].supply = "vdd";
	sdata->regulators[STMFTS_REGULATOR_AVDD].supply = "avdd";
	err = devm_regulator_bulk_get(&client->dev,
				      ARRAY_SIZE(sdata->regulators),
				      sdata->regulators);
	if (err)
		return err;

	sdata->input = devm_input_allocate_device(&client->dev);
	if (!sdata->input)
		return -ENOMEM;

	sdata->input->name = STMFTS_DEV_NAME;
	sdata->input->id.bustype = BUS_I2C;
	sdata->input->open = stmfts_input_open;
	sdata->input->close = stmfts_input_close;

	touchscreen_parse_properties(sdata->input, true, &sdata->prop);

	input_set_abs_params(sdata->input, ABS_MT_POSITION_X, 0,
						sdata->prop.max_x, 0, 0);
	input_set_abs_params(sdata->input, ABS_MT_POSITION_Y, 0,
						sdata->prop.max_y, 0, 0);
	input_set_abs_params(sdata->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
	input_set_abs_params(sdata->input, ABS_MT_TOUCH_MINOR, 0, 255, 0, 0);
	input_set_abs_params(sdata->input, ABS_MT_ORIENTATION, 0, 255, 0, 0);
	input_set_abs_params(sdata->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
	input_set_abs_params(sdata->input, ABS_DISTANCE, 0, 255, 0, 0);

	sdata->use_key = device_property_read_bool(&client->dev,
						   "touch-key-connected");
	if (sdata->use_key) {
		input_set_capability(sdata->input, EV_KEY, KEY_MENU);
		input_set_capability(sdata->input, EV_KEY, KEY_BACK);
	}

	err = input_mt_init_slots(sdata->input,
				  STMFTS_MAX_FINGERS, INPUT_MT_DIRECT);
	if (err)
		return err;

	input_set_drvdata(sdata->input, sdata);

	err = devm_request_threaded_irq(&client->dev, client->irq,
					NULL, stmfts_irq_handler,
					IRQF_ONESHOT,
					"stmfts_irq", sdata);
	if (err)
		return err;

	/* stmfts_power_on expects interrupt to be disabled */
	disable_irq(client->irq);

	dev_dbg(&client->dev, "initializing ST-Microelectronics FTS...\n");

	err = stmfts_power_on(sdata);
	if (err)
		return err;

	err = devm_add_action_or_reset(&client->dev, stmfts_power_off, sdata);
	if (err)
		return err;

	err = input_register_device(sdata->input);
	if (err)
		return err;

	if (sdata->use_key) {
		err = stmfts_enable_led(sdata);
		if (err) {
			/*
			 * Even if the LEDs have failed to be initialized and
			 * used in the driver, I can still use the device even
			 * without LEDs. The ledvdd regulator pointer will be
			 * used as a flag.
			 */
			dev_warn(&client->dev, "unable to use touchkey leds\n");
			sdata->ledvdd = NULL;
		}
	}

	err = sysfs_create_group(&sdata->client->dev.kobj,
				 &stmfts_attribute_group);
	if (err)
		return err;

	pm_runtime_enable(&client->dev);

	return 0;
}

static int stmfts_remove(struct i2c_client *client)
{
	pm_runtime_disable(&client->dev);
	sysfs_remove_group(&client->dev.kobj, &stmfts_attribute_group);

	return 0;
}

static int __maybe_unused stmfts_runtime_suspend(struct device *dev)
{
	struct stmfts_data *sdata = dev_get_drvdata(dev);
	int ret;

	ret = i2c_smbus_write_byte(sdata->client, STMFTS_SLEEP_IN);
	if (ret)
		dev_warn(dev, "failed to suspend device: %d\n", ret);

	return ret;
}

static int __maybe_unused stmfts_runtime_resume(struct device *dev)
{
	struct stmfts_data *sdata = dev_get_drvdata(dev);
	int ret;

	ret = i2c_smbus_write_byte(sdata->client, STMFTS_SLEEP_OUT);
	if (ret)
		dev_err(dev, "failed to resume device: %d\n", ret);

	return ret;
}

static int __maybe_unused stmfts_suspend(struct device *dev)
{
	struct stmfts_data *sdata = dev_get_drvdata(dev);

	stmfts_power_off(sdata);

	return 0;
}

static int __maybe_unused stmfts_resume(struct device *dev)
{
	struct stmfts_data *sdata = dev_get_drvdata(dev);

	return stmfts_power_on(sdata);
}

static const struct dev_pm_ops stmfts_pm_ops = {
	SET_SYSTEM_SLEEP_PM_OPS(stmfts_suspend, stmfts_resume)
	SET_RUNTIME_PM_OPS(stmfts_runtime_suspend, stmfts_runtime_resume, NULL)
};

#ifdef CONFIG_OF
static const struct of_device_id stmfts_of_match[] = {
	{ .compatible = "st,stmfts", },
	{ },
};
MODULE_DEVICE_TABLE(of, stmfts_of_match);
#endif

static const struct i2c_device_id stmfts_id[] = {
	{ "stmfts", 0 },
	{ },
};
MODULE_DEVICE_TABLE(i2c, stmfts_id);

static struct i2c_driver stmfts_driver = {
	.driver = {
		.name = STMFTS_DEV_NAME,
		.of_match_table = of_match_ptr(stmfts_of_match),
		.pm = &stmfts_pm_ops,
	},
	.probe = stmfts_probe,
	.remove = stmfts_remove,
	.id_table = stmfts_id,
};

module_i2c_driver(stmfts_driver);

MODULE_AUTHOR("Andi Shyti <andi.shyti@samsung.com>");
MODULE_DESCRIPTION("STMicroelectronics FTS Touch Screen");
MODULE_LICENSE("GPL v2");