| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163 |
- menuconfig POWER_RESET
- bool "Board level reset or power off"
- help
- Provides a number of drivers which either reset a complete board
- or shut it down, by manipulating the main power supply on the board.
- Say Y here to enable board reset and power off
- if POWER_RESET
- config POWER_RESET_AS3722
- bool "ams AS3722 power-off driver"
- depends on MFD_AS3722
- help
- This driver supports turning off board via a ams AS3722 power-off.
- config POWER_RESET_AT91_POWEROFF
- bool "Atmel AT91 poweroff driver"
- depends on ARCH_AT91
- default SOC_AT91SAM9 || SOC_SAMA5
- help
- This driver supports poweroff for Atmel AT91SAM9 and SAMA5
- SoCs
- config POWER_RESET_AT91_RESET
- bool "Atmel AT91 reset driver"
- depends on ARCH_AT91
- default SOC_AT91SAM9 || SOC_SAMA5
- help
- This driver supports restart for Atmel AT91SAM9 and SAMA5
- SoCs
- config POWER_RESET_AXXIA
- bool "LSI Axxia reset driver"
- depends on ARCH_AXXIA
- help
- This driver supports restart for Axxia SoC.
- Say Y if you have an Axxia family SoC.
- config POWER_RESET_BRCMSTB
- bool "Broadcom STB reset driver" if COMPILE_TEST
- depends on ARM
- default ARCH_BRCMSTB
- help
- This driver provides restart support for ARM-based Broadcom STB
- boards.
- Say Y here if you have an ARM-based Broadcom STB board and you wish
- to have restart support.
- config POWER_RESET_GPIO
- bool "GPIO power-off driver"
- depends on OF_GPIO
- help
- This driver supports turning off your board via a GPIO line.
- If your board needs a GPIO high/low to power down, say Y and
- create a binding in your devicetree.
- config POWER_RESET_GPIO_RESTART
- bool "GPIO restart driver"
- depends on OF_GPIO
- help
- This driver supports restarting your board via a GPIO line.
- If your board needs a GPIO high/low to restart, say Y and
- create a binding in your devicetree.
- config POWER_RESET_HISI
- bool "Hisilicon power-off driver"
- depends on ARCH_HISI
- help
- Reboot support for Hisilicon boards.
- config POWER_RESET_IMX
- bool "IMX6 power-off driver"
- depends on POWER_RESET && SOC_IMX6
- help
- This driver support power off external PMIC by PMIC_ON_REQ on i.mx6
- boards.If you want to use other pin to control external power,please
- say N here or disable in dts to make sure pm_power_off never be
- overwrote wrongly by this driver.
- config POWER_RESET_MSM
- bool "Qualcomm MSM power-off driver"
- depends on ARCH_QCOM
- help
- Power off and restart support for Qualcomm boards.
- config POWER_RESET_LTC2952
- bool "LTC2952 PowerPath power-off driver"
- depends on OF_GPIO
- help
- This driver supports an external powerdown trigger and board power
- down via the LTC2952. Bindings are made in the device tree.
- config POWER_RESET_QNAP
- bool "QNAP power-off driver"
- depends on OF_GPIO && PLAT_ORION
- help
- This driver supports turning off QNAP NAS devices by sending
- commands to the microcontroller which controls the main power.
- Say Y if you have a QNAP NAS.
- config POWER_RESET_RESTART
- bool "Restart power-off driver"
- depends on ARM
- help
- Some boards don't actually have the ability to power off.
- Instead they restart, and u-boot holds the SoC until the
- user presses a key. u-boot then boots into Linux.
- config POWER_RESET_SUN6I
- bool "Allwinner A31 SoC reset driver"
- depends on ARCH_SUNXI
- help
- Reboot support for the Allwinner A31 SoCs.
- config POWER_RESET_ST
- bool "ST restart power-off driver"
- depends on ARCH_STI
- help
- Power off and reset support for STMicroelectronics boards.
- config POWER_RESET_VERSATILE
- bool "ARM Versatile family reboot driver"
- depends on ARM
- depends on MFD_SYSCON
- depends on OF
- help
- Power off and restart support for ARM Versatile family of
- reference boards.
- config POWER_RESET_VEXPRESS
- bool "ARM Versatile Express power-off and reset driver"
- depends on ARM || ARM64
- depends on VEXPRESS_CONFIG
- help
- Power off and reset support for the ARM Ltd. Versatile
- Express boards.
- config POWER_RESET_XGENE
- bool "APM SoC X-Gene reset driver"
- depends on ARM64
- help
- Reboot support for the APM SoC X-Gene Eval boards.
- config POWER_RESET_KEYSTONE
- bool "Keystone reset driver"
- depends on ARCH_KEYSTONE
- select MFD_SYSCON
- help
- Reboot support for the KEYSTONE SoCs.
- config POWER_RESET_SYSCON
- bool "Generic SYSCON regmap reset driver"
- depends on OF
- select MFD_SYSCON
- help
- Reboot support for generic SYSCON mapped register reset.
- endif
|
