pdata-quirks.c 16 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590
  1. /*
  2. * Legacy platform_data quirks
  3. *
  4. * Copyright (C) 2013 Texas Instruments
  5. *
  6. * This program is free software; you can redistribute it and/or modify
  7. * it under the terms of the GNU General Public License version 2 as
  8. * published by the Free Software Foundation.
  9. */
  10. #include <linux/clk.h>
  11. #include <linux/davinci_emac.h>
  12. #include <linux/gpio.h>
  13. #include <linux/init.h>
  14. #include <linux/kernel.h>
  15. #include <linux/of_platform.h>
  16. #include <linux/ti_wilink_st.h>
  17. #include <linux/wl12xx.h>
  18. #include <linux/mmc/card.h>
  19. #include <linux/mmc/host.h>
  20. #include <linux/regulator/machine.h>
  21. #include <linux/regulator/fixed.h>
  22. #include <linux/platform_data/pinctrl-single.h>
  23. #include <linux/platform_data/iommu-omap.h>
  24. #include <linux/platform_data/wkup_m3.h>
  25. #include <linux/platform_data/pwm_omap_dmtimer.h>
  26. #include <plat/dmtimer.h>
  27. #include "common.h"
  28. #include "common-board-devices.h"
  29. #include "dss-common.h"
  30. #include "control.h"
  31. #include "omap_device.h"
  32. #include "omap-secure.h"
  33. #include "soc.h"
  34. #include "hsmmc.h"
  35. struct pdata_init {
  36. const char *compatible;
  37. void (*fn)(void);
  38. };
  39. static struct of_dev_auxdata omap_auxdata_lookup[];
  40. static struct twl4030_gpio_platform_data twl_gpio_auxdata;
  41. #ifdef CONFIG_MACH_NOKIA_N8X0
  42. static void __init omap2420_n8x0_legacy_init(void)
  43. {
  44. omap_auxdata_lookup[0].platform_data = n8x0_legacy_init();
  45. }
  46. #else
  47. #define omap2420_n8x0_legacy_init NULL
  48. #endif
  49. #ifdef CONFIG_ARCH_OMAP3
  50. /*
  51. * Configures GPIOs 126, 127 and 129 to 1.8V mode instead of 3.0V
  52. * mode for MMC1 in case bootloader did not configure things.
  53. * Note that if the pins are used for MMC1, pbias-regulator
  54. * manages the IO voltage.
  55. */
  56. static void __init omap3_gpio126_127_129(void)
  57. {
  58. u32 reg;
  59. reg = omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
  60. reg &= ~OMAP343X_PBIASLITEVMODE1;
  61. reg |= OMAP343X_PBIASLITEPWRDNZ1;
  62. omap_ctrl_writel(reg, OMAP343X_CONTROL_PBIAS_LITE);
  63. if (cpu_is_omap3630()) {
  64. reg = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
  65. reg |= OMAP36XX_GPIO_IO_PWRDNZ;
  66. omap_ctrl_writel(reg, OMAP34XX_CONTROL_WKUP_CTRL);
  67. }
  68. }
  69. static void __init hsmmc2_internal_input_clk(void)
  70. {
  71. u32 reg;
  72. reg = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
  73. reg |= OMAP2_MMCSDIO2ADPCLKISEL;
  74. omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1);
  75. }
  76. static struct iommu_platform_data omap3_iommu_pdata = {
  77. .reset_name = "mmu",
  78. .assert_reset = omap_device_assert_hardreset,
  79. .deassert_reset = omap_device_deassert_hardreset,
  80. };
  81. static int omap3_sbc_t3730_twl_callback(struct device *dev,
  82. unsigned gpio,
  83. unsigned ngpio)
  84. {
  85. int res;
  86. res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
  87. "wlan pwr");
  88. if (res)
  89. return res;
  90. gpio_export(gpio, 0);
  91. return 0;
  92. }
  93. static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
  94. {
  95. int err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, hub_name);
  96. if (err) {
  97. pr_err("SBC-T3x: %s reset gpio request failed: %d\n",
  98. hub_name, err);
  99. return;
  100. }
  101. gpio_export(gpio, 0);
  102. udelay(10);
  103. gpio_set_value(gpio, 1);
  104. msleep(1);
  105. }
  106. static void __init omap3_sbc_t3730_twl_init(void)
  107. {
  108. twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback;
  109. }
  110. static void __init omap3_sbc_t3730_legacy_init(void)
  111. {
  112. omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
  113. }
  114. static void __init omap3_sbc_t3530_legacy_init(void)
  115. {
  116. omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
  117. }
  118. static struct ti_st_plat_data wilink_pdata = {
  119. .nshutdown_gpio = 137,
  120. .dev_name = "/dev/ttyO1",
  121. .flow_cntrl = 1,
  122. .baud_rate = 300000,
  123. };
  124. static struct platform_device wl18xx_device = {
  125. .name = "kim",
  126. .id = -1,
  127. .dev = {
  128. .platform_data = &wilink_pdata,
  129. }
  130. };
  131. static struct ti_st_plat_data wilink7_pdata = {
  132. .nshutdown_gpio = 162,
  133. .dev_name = "/dev/ttyO1",
  134. .flow_cntrl = 1,
  135. .baud_rate = 300000,
  136. };
  137. static struct platform_device wl128x_device = {
  138. .name = "kim",
  139. .id = -1,
  140. .dev = {
  141. .platform_data = &wilink7_pdata,
  142. }
  143. };
  144. static struct platform_device btwilink_device = {
  145. .name = "btwilink",
  146. .id = -1,
  147. };
  148. static void __init omap3_igep0020_rev_f_legacy_init(void)
  149. {
  150. platform_device_register(&wl18xx_device);
  151. platform_device_register(&btwilink_device);
  152. }
  153. static void __init omap3_igep0030_rev_g_legacy_init(void)
  154. {
  155. platform_device_register(&wl18xx_device);
  156. platform_device_register(&btwilink_device);
  157. }
  158. static void __init omap3_evm_legacy_init(void)
  159. {
  160. hsmmc2_internal_input_clk();
  161. }
  162. static void am35xx_enable_emac_int(void)
  163. {
  164. u32 v;
  165. v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
  166. v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR |
  167. AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR);
  168. omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
  169. omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
  170. }
  171. static void am35xx_disable_emac_int(void)
  172. {
  173. u32 v;
  174. v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
  175. v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR);
  176. omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
  177. omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
  178. }
  179. static struct emac_platform_data am35xx_emac_pdata = {
  180. .interrupt_enable = am35xx_enable_emac_int,
  181. .interrupt_disable = am35xx_disable_emac_int,
  182. };
  183. static void __init am35xx_emac_reset(void)
  184. {
  185. u32 v;
  186. v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
  187. v &= ~AM35XX_CPGMACSS_SW_RST;
  188. omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
  189. omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
  190. }
  191. static struct gpio cm_t3517_wlan_gpios[] __initdata = {
  192. { 56, GPIOF_OUT_INIT_HIGH, "wlan pwr" },
  193. { 4, GPIOF_OUT_INIT_HIGH, "xcvr noe" },
  194. };
  195. static void __init omap3_sbc_t3517_wifi_init(void)
  196. {
  197. int err = gpio_request_array(cm_t3517_wlan_gpios,
  198. ARRAY_SIZE(cm_t3517_wlan_gpios));
  199. if (err) {
  200. pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err);
  201. return;
  202. }
  203. gpio_export(cm_t3517_wlan_gpios[0].gpio, 0);
  204. gpio_export(cm_t3517_wlan_gpios[1].gpio, 0);
  205. msleep(100);
  206. gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
  207. }
  208. static void __init omap3_sbc_t3517_legacy_init(void)
  209. {
  210. omap3_sbc_t3x_usb_hub_init(152, "cm-t3517 usb hub");
  211. omap3_sbc_t3x_usb_hub_init(98, "sb-t35 usb hub");
  212. am35xx_emac_reset();
  213. hsmmc2_internal_input_clk();
  214. omap3_sbc_t3517_wifi_init();
  215. }
  216. static void __init am3517_evm_legacy_init(void)
  217. {
  218. am35xx_emac_reset();
  219. }
  220. static struct platform_device omap3_rom_rng_device = {
  221. .name = "omap3-rom-rng",
  222. .id = -1,
  223. .dev = {
  224. .platform_data = rx51_secure_rng_call,
  225. },
  226. };
  227. static void __init nokia_n900_legacy_init(void)
  228. {
  229. hsmmc2_internal_input_clk();
  230. if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
  231. if (IS_ENABLED(CONFIG_ARM_ERRATA_430973)) {
  232. pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
  233. /* set IBE to 1 */
  234. rx51_secure_update_aux_cr(BIT(6), 0);
  235. } else {
  236. pr_warn("RX-51: Not enabling ARM errata 430973 workaround\n");
  237. pr_warn("Thumb binaries may crash randomly without this workaround\n");
  238. }
  239. pr_info("RX-51: Registering OMAP3 HWRNG device\n");
  240. platform_device_register(&omap3_rom_rng_device);
  241. }
  242. }
  243. static void __init omap3_tao3530_legacy_init(void)
  244. {
  245. hsmmc2_internal_input_clk();
  246. }
  247. static void __init omap3_logicpd_torpedo_init(void)
  248. {
  249. omap3_gpio126_127_129();
  250. platform_device_register(&wl128x_device);
  251. platform_device_register(&btwilink_device);
  252. }
  253. /* omap3pandora legacy devices */
  254. #define PANDORA_WIFI_IRQ_GPIO 21
  255. #define PANDORA_WIFI_NRESET_GPIO 23
  256. static struct platform_device pandora_backlight = {
  257. .name = "pandora-backlight",
  258. .id = -1,
  259. };
  260. static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
  261. REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
  262. };
  263. static struct regulator_init_data pandora_vmmc3 = {
  264. .constraints = {
  265. .valid_ops_mask = REGULATOR_CHANGE_STATUS,
  266. },
  267. .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply),
  268. .consumer_supplies = pandora_vmmc3_supply,
  269. };
  270. static struct fixed_voltage_config pandora_vwlan = {
  271. .supply_name = "vwlan",
  272. .microvolts = 1800000, /* 1.8V */
  273. .gpio = PANDORA_WIFI_NRESET_GPIO,
  274. .startup_delay = 50000, /* 50ms */
  275. .enable_high = 1,
  276. .init_data = &pandora_vmmc3,
  277. };
  278. static struct platform_device pandora_vwlan_device = {
  279. .name = "reg-fixed-voltage",
  280. .id = 1,
  281. .dev = {
  282. .platform_data = &pandora_vwlan,
  283. },
  284. };
  285. static void pandora_wl1251_init_card(struct mmc_card *card)
  286. {
  287. /*
  288. * We have TI wl1251 attached to MMC3. Pass this information to
  289. * SDIO core because it can't be probed by normal methods.
  290. */
  291. if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
  292. card->quirks |= MMC_QUIRK_NONSTD_SDIO;
  293. card->cccr.wide_bus = 1;
  294. card->cis.vendor = 0x104c;
  295. card->cis.device = 0x9066;
  296. card->cis.blksize = 512;
  297. card->cis.max_dtr = 24000000;
  298. card->ocr = 0x80;
  299. }
  300. }
  301. static struct omap2_hsmmc_info pandora_mmc3[] = {
  302. {
  303. .mmc = 3,
  304. .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
  305. .gpio_cd = -EINVAL,
  306. .gpio_wp = -EINVAL,
  307. .init_card = pandora_wl1251_init_card,
  308. },
  309. {} /* Terminator */
  310. };
  311. static void __init pandora_wl1251_init(void)
  312. {
  313. struct wl1251_platform_data pandora_wl1251_pdata;
  314. int ret;
  315. memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
  316. pandora_wl1251_pdata.power_gpio = -1;
  317. ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
  318. if (ret < 0)
  319. goto fail;
  320. pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
  321. if (pandora_wl1251_pdata.irq < 0)
  322. goto fail_irq;
  323. pandora_wl1251_pdata.use_eeprom = true;
  324. ret = wl1251_set_platform_data(&pandora_wl1251_pdata);
  325. if (ret < 0)
  326. goto fail_irq;
  327. return;
  328. fail_irq:
  329. gpio_free(PANDORA_WIFI_IRQ_GPIO);
  330. fail:
  331. pr_err("wl1251 board initialisation failed\n");
  332. }
  333. static void __init omap3_pandora_legacy_init(void)
  334. {
  335. platform_device_register(&pandora_backlight);
  336. platform_device_register(&pandora_vwlan_device);
  337. omap_hsmmc_init(pandora_mmc3);
  338. omap_hsmmc_late_init(pandora_mmc3);
  339. pandora_wl1251_init();
  340. }
  341. #endif /* CONFIG_ARCH_OMAP3 */
  342. #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
  343. static struct iommu_platform_data omap4_iommu_pdata = {
  344. .reset_name = "mmu_cache",
  345. .assert_reset = omap_device_assert_hardreset,
  346. .deassert_reset = omap_device_deassert_hardreset,
  347. };
  348. #endif
  349. #if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
  350. static struct wkup_m3_platform_data wkup_m3_data = {
  351. .reset_name = "wkup_m3",
  352. .assert_reset = omap_device_assert_hardreset,
  353. .deassert_reset = omap_device_deassert_hardreset,
  354. };
  355. #endif
  356. #ifdef CONFIG_SOC_OMAP5
  357. static void __init omap5_uevm_legacy_init(void)
  358. {
  359. }
  360. #endif
  361. static struct pcs_pdata pcs_pdata;
  362. void omap_pcs_legacy_init(int irq, void (*rearm)(void))
  363. {
  364. pcs_pdata.irq = irq;
  365. pcs_pdata.rearm = rearm;
  366. }
  367. /*
  368. * GPIOs for TWL are initialized by the I2C bus and need custom
  369. * handing until DSS has device tree bindings.
  370. */
  371. void omap_auxdata_legacy_init(struct device *dev)
  372. {
  373. if (dev->platform_data)
  374. return;
  375. if (strcmp("twl4030-gpio", dev_name(dev)))
  376. return;
  377. dev->platform_data = &twl_gpio_auxdata;
  378. }
  379. /* Dual mode timer PWM callbacks platdata */
  380. #if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
  381. struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
  382. .request_by_node = omap_dm_timer_request_by_node,
  383. .free = omap_dm_timer_free,
  384. .enable = omap_dm_timer_enable,
  385. .disable = omap_dm_timer_disable,
  386. .get_fclk = omap_dm_timer_get_fclk,
  387. .start = omap_dm_timer_start,
  388. .stop = omap_dm_timer_stop,
  389. .set_load = omap_dm_timer_set_load,
  390. .set_match = omap_dm_timer_set_match,
  391. .set_pwm = omap_dm_timer_set_pwm,
  392. .set_prescaler = omap_dm_timer_set_prescaler,
  393. .write_counter = omap_dm_timer_write_counter,
  394. };
  395. #endif
  396. /*
  397. * Few boards still need auxdata populated before we populate
  398. * the dev entries in of_platform_populate().
  399. */
  400. static struct pdata_init auxdata_quirks[] __initdata = {
  401. #ifdef CONFIG_SOC_OMAP2420
  402. { "nokia,n800", omap2420_n8x0_legacy_init, },
  403. { "nokia,n810", omap2420_n8x0_legacy_init, },
  404. { "nokia,n810-wimax", omap2420_n8x0_legacy_init, },
  405. #endif
  406. #ifdef CONFIG_ARCH_OMAP3
  407. { "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, },
  408. #endif
  409. { /* sentinel */ },
  410. };
  411. static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
  412. #ifdef CONFIG_MACH_NOKIA_N8X0
  413. OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
  414. OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data),
  415. OF_DEV_AUXDATA("tlv320aic3x", 0x18, "2-0018", &n810_aic33_data),
  416. #endif
  417. #ifdef CONFIG_ARCH_OMAP3
  418. OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
  419. OF_DEV_AUXDATA("ti,omap3-padconf", 0x480025a0, "480025a0.pinmux", &pcs_pdata),
  420. OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
  421. OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
  422. &omap3_iommu_pdata),
  423. /* Only on am3517 */
  424. OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
  425. OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
  426. &am35xx_emac_pdata),
  427. #endif
  428. #ifdef CONFIG_SOC_AM33XX
  429. OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
  430. &wkup_m3_data),
  431. #endif
  432. #ifdef CONFIG_ARCH_OMAP4
  433. OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
  434. OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
  435. #endif
  436. #ifdef CONFIG_SOC_OMAP5
  437. OF_DEV_AUXDATA("ti,omap5-padconf", 0x4a002840, "4a002840.pinmux", &pcs_pdata),
  438. OF_DEV_AUXDATA("ti,omap5-padconf", 0x4ae0c840, "4ae0c840.pinmux", &pcs_pdata),
  439. #endif
  440. #ifdef CONFIG_SOC_DRA7XX
  441. OF_DEV_AUXDATA("ti,dra7-padconf", 0x4a003400, "4a003400.pinmux", &pcs_pdata),
  442. #endif
  443. #ifdef CONFIG_SOC_AM43XX
  444. OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata),
  445. OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
  446. &wkup_m3_data),
  447. #endif
  448. #if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
  449. OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata),
  450. #endif
  451. #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
  452. OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
  453. &omap4_iommu_pdata),
  454. OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
  455. &omap4_iommu_pdata),
  456. #endif
  457. { /* sentinel */ },
  458. };
  459. /*
  460. * Few boards still need to initialize some legacy devices with
  461. * platform data until the drivers support device tree.
  462. */
  463. static struct pdata_init pdata_quirks[] __initdata = {
  464. #ifdef CONFIG_ARCH_OMAP3
  465. { "compulab,omap3-sbc-t3517", omap3_sbc_t3517_legacy_init, },
  466. { "compulab,omap3-sbc-t3530", omap3_sbc_t3530_legacy_init, },
  467. { "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, },
  468. { "nokia,omap3-n900", nokia_n900_legacy_init, },
  469. { "nokia,omap3-n9", hsmmc2_internal_input_clk, },
  470. { "nokia,omap3-n950", hsmmc2_internal_input_clk, },
  471. { "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
  472. { "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
  473. { "logicpd,dm3730-torpedo-devkit", omap3_logicpd_torpedo_init, },
  474. { "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
  475. { "ti,am3517-evm", am3517_evm_legacy_init, },
  476. { "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
  477. { "openpandora,omap3-pandora-600mhz", omap3_pandora_legacy_init, },
  478. { "openpandora,omap3-pandora-1ghz", omap3_pandora_legacy_init, },
  479. #endif
  480. #ifdef CONFIG_SOC_OMAP5
  481. { "ti,omap5-uevm", omap5_uevm_legacy_init, },
  482. #endif
  483. { /* sentinel */ },
  484. };
  485. static void pdata_quirks_check(struct pdata_init *quirks)
  486. {
  487. while (quirks->compatible) {
  488. if (of_machine_is_compatible(quirks->compatible)) {
  489. if (quirks->fn)
  490. quirks->fn();
  491. break;
  492. }
  493. quirks++;
  494. }
  495. }
  496. void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
  497. {
  498. /*
  499. * We still need this for omap2420 and omap3 PM to work, others are
  500. * using drivers/misc/sram.c already.
  501. */
  502. if (of_machine_is_compatible("ti,omap2420") ||
  503. of_machine_is_compatible("ti,omap3"))
  504. omap_sdrc_init(NULL, NULL);
  505. pdata_quirks_check(auxdata_quirks);
  506. of_platform_populate(NULL, omap_dt_match_table,
  507. omap_auxdata_lookup, NULL);
  508. pdata_quirks_check(pdata_quirks);
  509. }