123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250 |
- /*
- *
- * (C) COPYRIGHT 2013-2016 ARM Limited. All rights reserved.
- *
- * This program is free software and is provided to you under the terms of the
- * GNU General Public License version 2 as published by the Free Software
- * Foundation, and any use by you of this program is subject to the terms
- * of such GNU licence.
- *
- * ARM Mali DP hardware manipulation routines.
- */
- #ifndef __MALIDP_HW_H__
- #define __MALIDP_HW_H__
- #include <linux/bitops.h>
- #include "malidp_regs.h"
- struct videomode;
- struct clk;
- /* Mali DP IP blocks */
- enum {
- MALIDP_DE_BLOCK = 0,
- MALIDP_SE_BLOCK,
- MALIDP_DC_BLOCK
- };
- /* Mali DP layer IDs */
- enum {
- DE_VIDEO1 = BIT(0),
- DE_GRAPHICS1 = BIT(1),
- DE_GRAPHICS2 = BIT(2), /* used only in DP500 */
- DE_VIDEO2 = BIT(3),
- DE_SMART = BIT(4),
- };
- struct malidp_input_format {
- u32 format; /* DRM fourcc */
- u8 layer; /* bitmask of layers supporting it */
- u8 id; /* used internally */
- };
- #define MALIDP_INVALID_FORMAT_ID 0xff
- /*
- * hide the differences between register maps
- * by using a common structure to hold the
- * base register offsets
- */
- struct malidp_irq_map {
- u32 irq_mask; /* mask of IRQs that can be enabled in the block */
- u32 vsync_irq; /* IRQ bit used for signaling during VSYNC */
- };
- struct malidp_layer {
- u16 id; /* layer ID */
- u16 base; /* address offset for the register bank */
- u16 ptr; /* address offset for the pointer register */
- };
- /* regmap features */
- #define MALIDP_REGMAP_HAS_CLEARIRQ (1 << 0)
- struct malidp_hw_regmap {
- /* address offset of the DE register bank */
- /* is always 0x0000 */
- /* address offset of the SE registers bank */
- const u16 se_base;
- /* address offset of the DC registers bank */
- const u16 dc_base;
- /* address offset for the output depth register */
- const u16 out_depth_base;
- /* bitmap with register map features */
- const u8 features;
- /* list of supported layers */
- const u8 n_layers;
- const struct malidp_layer *layers;
- const struct malidp_irq_map de_irq_map;
- const struct malidp_irq_map se_irq_map;
- const struct malidp_irq_map dc_irq_map;
- /* list of supported input formats for each layer */
- const struct malidp_input_format *input_formats;
- const u8 n_input_formats;
- /* pitch alignment requirement in bytes */
- const u8 bus_align_bytes;
- };
- struct malidp_hw_device {
- const struct malidp_hw_regmap map;
- void __iomem *regs;
- /* APB clock */
- struct clk *pclk;
- /* AXI clock */
- struct clk *aclk;
- /* main clock for display core */
- struct clk *mclk;
- /* pixel clock for display core */
- struct clk *pxlclk;
- /*
- * Validate the driver instance against the hardware bits
- */
- int (*query_hw)(struct malidp_hw_device *hwdev);
- /*
- * Set the hardware into config mode, ready to accept mode changes
- */
- void (*enter_config_mode)(struct malidp_hw_device *hwdev);
- /*
- * Tell hardware to exit configuration mode
- */
- void (*leave_config_mode)(struct malidp_hw_device *hwdev);
- /*
- * Query if hardware is in configuration mode
- */
- bool (*in_config_mode)(struct malidp_hw_device *hwdev);
- /*
- * Set configuration valid flag for hardware parameters that can
- * be changed outside the configuration mode. Hardware will use
- * the new settings when config valid is set after the end of the
- * current buffer scanout
- */
- void (*set_config_valid)(struct malidp_hw_device *hwdev);
- /*
- * Set a new mode in hardware. Requires the hardware to be in
- * configuration mode before this function is called.
- */
- void (*modeset)(struct malidp_hw_device *hwdev, struct videomode *m);
- /*
- * Calculate the required rotation memory given the active area
- * and the buffer format.
- */
- int (*rotmem_required)(struct malidp_hw_device *hwdev, u16 w, u16 h, u32 fmt);
- u8 features;
- u8 min_line_size;
- u16 max_line_size;
- /* size of memory used for rotating layers, up to two banks available */
- u32 rotation_memory[2];
- };
- /* Supported variants of the hardware */
- enum {
- MALIDP_500 = 0,
- MALIDP_550,
- MALIDP_650,
- /* keep the next entry last */
- MALIDP_MAX_DEVICES
- };
- extern const struct malidp_hw_device malidp_device[MALIDP_MAX_DEVICES];
- static inline u32 malidp_hw_read(struct malidp_hw_device *hwdev, u32 reg)
- {
- return readl(hwdev->regs + reg);
- }
- static inline void malidp_hw_write(struct malidp_hw_device *hwdev,
- u32 value, u32 reg)
- {
- writel(value, hwdev->regs + reg);
- }
- static inline void malidp_hw_setbits(struct malidp_hw_device *hwdev,
- u32 mask, u32 reg)
- {
- u32 data = malidp_hw_read(hwdev, reg);
- data |= mask;
- malidp_hw_write(hwdev, data, reg);
- }
- static inline void malidp_hw_clearbits(struct malidp_hw_device *hwdev,
- u32 mask, u32 reg)
- {
- u32 data = malidp_hw_read(hwdev, reg);
- data &= ~mask;
- malidp_hw_write(hwdev, data, reg);
- }
- static inline u32 malidp_get_block_base(struct malidp_hw_device *hwdev,
- u8 block)
- {
- switch (block) {
- case MALIDP_SE_BLOCK:
- return hwdev->map.se_base;
- case MALIDP_DC_BLOCK:
- return hwdev->map.dc_base;
- }
- return 0;
- }
- static inline void malidp_hw_disable_irq(struct malidp_hw_device *hwdev,
- u8 block, u32 irq)
- {
- u32 base = malidp_get_block_base(hwdev, block);
- malidp_hw_clearbits(hwdev, irq, base + MALIDP_REG_MASKIRQ);
- }
- static inline void malidp_hw_enable_irq(struct malidp_hw_device *hwdev,
- u8 block, u32 irq)
- {
- u32 base = malidp_get_block_base(hwdev, block);
- malidp_hw_setbits(hwdev, irq, base + MALIDP_REG_MASKIRQ);
- }
- int malidp_de_irq_init(struct drm_device *drm, int irq);
- void malidp_de_irq_fini(struct drm_device *drm);
- int malidp_se_irq_init(struct drm_device *drm, int irq);
- void malidp_se_irq_fini(struct drm_device *drm);
- u8 malidp_hw_get_format_id(const struct malidp_hw_regmap *map,
- u8 layer_id, u32 format);
- static inline bool malidp_hw_pitch_valid(struct malidp_hw_device *hwdev,
- unsigned int pitch)
- {
- return !(pitch & (hwdev->map.bus_align_bytes - 1));
- }
- /*
- * background color components are defined as 12bits values,
- * they will be shifted right when stored on hardware that
- * supports only 8bits per channel
- */
- #define MALIDP_BGND_COLOR_R 0x000
- #define MALIDP_BGND_COLOR_G 0x000
- #define MALIDP_BGND_COLOR_B 0x000
- #endif /* __MALIDP_HW_H__ */
|