Kconfig.arm 7.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273
  1. #
  2. # ARM CPU Frequency scaling drivers
  3. #
  4. # big LITTLE core layer and glue drivers
  5. config ARM_BIG_LITTLE_CPUFREQ
  6. tristate "Generic ARM big LITTLE CPUfreq driver"
  7. depends on (ARM_CPU_TOPOLOGY || ARM64) && HAVE_CLK
  8. # if CPU_THERMAL is on and THERMAL=m, ARM_BIT_LITTLE_CPUFREQ cannot be =y
  9. depends on !CPU_THERMAL || THERMAL
  10. select PM_OPP
  11. help
  12. This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
  13. config ARM_BRCMSTB_AVS_CPUFREQ
  14. tristate "Broadcom STB AVS CPUfreq driver"
  15. depends on ARCH_BRCMSTB || COMPILE_TEST
  16. default y
  17. help
  18. Some Broadcom STB SoCs use a co-processor running proprietary firmware
  19. ("AVS") to handle voltage and frequency scaling. This driver provides
  20. a standard CPUfreq interface to to the firmware.
  21. Say Y, if you have a Broadcom SoC with AVS support for DFS or DVFS.
  22. config ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
  23. bool "Broadcom STB AVS CPUfreq driver sysfs debug capability"
  24. depends on ARM_BRCMSTB_AVS_CPUFREQ
  25. help
  26. Enabling this option turns on debug support via sysfs under
  27. /sys/kernel/debug/brcmstb-avs-cpufreq. It is possible to read all and
  28. write some AVS mailbox registers through sysfs entries.
  29. If in doubt, say N.
  30. config ARM_DT_BL_CPUFREQ
  31. tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver"
  32. depends on ARM_BIG_LITTLE_CPUFREQ && OF
  33. help
  34. This enables probing via DT for Generic CPUfreq driver for ARM
  35. big.LITTLE platform. This gets frequency tables from DT.
  36. config ARM_VEXPRESS_SPC_CPUFREQ
  37. tristate "Versatile Express SPC based CPUfreq driver"
  38. depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC
  39. help
  40. This add the CPUfreq driver support for Versatile Express
  41. big.LITTLE platforms using SPC for power management.
  42. config ARM_EXYNOS5440_CPUFREQ
  43. tristate "SAMSUNG EXYNOS5440"
  44. depends on SOC_EXYNOS5440
  45. depends on HAVE_CLK && OF
  46. select PM_OPP
  47. default y
  48. help
  49. This adds the CPUFreq driver for Samsung EXYNOS5440
  50. SoC. The nature of exynos5440 clock controller is
  51. different than previous exynos controllers so not using
  52. the common exynos framework.
  53. If in doubt, say N.
  54. config ARM_HIGHBANK_CPUFREQ
  55. tristate "Calxeda Highbank-based"
  56. depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR
  57. default m
  58. help
  59. This adds the CPUFreq driver for Calxeda Highbank SoC
  60. based boards.
  61. If in doubt, say N.
  62. config ARM_IMX6Q_CPUFREQ
  63. tristate "Freescale i.MX6 cpufreq support"
  64. depends on ARCH_MXC
  65. depends on REGULATOR_ANATOP
  66. select PM_OPP
  67. help
  68. This adds cpufreq driver support for Freescale i.MX6 series SoCs.
  69. If in doubt, say N.
  70. config ARM_KIRKWOOD_CPUFREQ
  71. def_bool MACH_KIRKWOOD
  72. help
  73. This adds the CPUFreq driver for Marvell Kirkwood
  74. SoCs.
  75. config ARM_MT8173_CPUFREQ
  76. tristate "Mediatek MT8173 CPUFreq support"
  77. depends on ARCH_MEDIATEK && REGULATOR
  78. depends on ARM64 || (ARM_CPU_TOPOLOGY && COMPILE_TEST)
  79. depends on !CPU_THERMAL || THERMAL
  80. select PM_OPP
  81. help
  82. This adds the CPUFreq driver support for Mediatek MT8173 SoC.
  83. config ARM_OMAP2PLUS_CPUFREQ
  84. bool "TI OMAP2+"
  85. depends on ARCH_OMAP2PLUS
  86. default ARCH_OMAP2PLUS
  87. config ARM_S3C_CPUFREQ
  88. bool
  89. help
  90. Internal configuration node for common cpufreq on Samsung SoC
  91. config ARM_S3C24XX_CPUFREQ
  92. bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
  93. depends on ARCH_S3C24XX
  94. select ARM_S3C_CPUFREQ
  95. help
  96. This enables the CPUfreq driver for the Samsung S3C24XX family
  97. of CPUs.
  98. For details, take a look at <file:Documentation/cpu-freq>.
  99. If in doubt, say N.
  100. config ARM_S3C24XX_CPUFREQ_DEBUG
  101. bool "Debug CPUfreq Samsung driver core"
  102. depends on ARM_S3C24XX_CPUFREQ
  103. help
  104. Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
  105. config ARM_S3C24XX_CPUFREQ_IODEBUG
  106. bool "Debug CPUfreq Samsung driver IO timing"
  107. depends on ARM_S3C24XX_CPUFREQ
  108. help
  109. Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
  110. config ARM_S3C24XX_CPUFREQ_DEBUGFS
  111. bool "Export debugfs for CPUFreq"
  112. depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS
  113. help
  114. Export status information via debugfs.
  115. config ARM_S3C2410_CPUFREQ
  116. bool
  117. depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410
  118. select S3C2410_CPUFREQ_UTILS
  119. help
  120. CPU Frequency scaling support for S3C2410
  121. config ARM_S3C2412_CPUFREQ
  122. bool
  123. depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412
  124. default y
  125. select S3C2412_IOTIMING
  126. help
  127. CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
  128. config ARM_S3C2416_CPUFREQ
  129. bool "S3C2416 CPU Frequency scaling support"
  130. depends on CPU_S3C2416
  131. help
  132. This adds the CPUFreq driver for the Samsung S3C2416 and
  133. S3C2450 SoC. The S3C2416 supports changing the rate of the
  134. armdiv clock source and also entering a so called dynamic
  135. voltage scaling mode in which it is possible to reduce the
  136. core voltage of the CPU.
  137. If in doubt, say N.
  138. config ARM_S3C2416_CPUFREQ_VCORESCALE
  139. bool "Allow voltage scaling for S3C2416 arm core"
  140. depends on ARM_S3C2416_CPUFREQ && REGULATOR
  141. help
  142. Enable CPU voltage scaling when entering the dvs mode.
  143. It uses information gathered through existing hardware and
  144. tests but not documented in any datasheet.
  145. If in doubt, say N.
  146. config ARM_S3C2440_CPUFREQ
  147. bool "S3C2440/S3C2442 CPU Frequency scaling support"
  148. depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442)
  149. select S3C2410_CPUFREQ_UTILS
  150. default y
  151. help
  152. CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
  153. config ARM_S3C64XX_CPUFREQ
  154. bool "Samsung S3C64XX"
  155. depends on CPU_S3C6410
  156. default y
  157. help
  158. This adds the CPUFreq driver for Samsung S3C6410 SoC.
  159. If in doubt, say N.
  160. config ARM_S5PV210_CPUFREQ
  161. bool "Samsung S5PV210 and S5PC110"
  162. depends on CPU_S5PV210
  163. default y
  164. help
  165. This adds the CPUFreq driver for Samsung S5PV210 and
  166. S5PC110 SoCs.
  167. If in doubt, say N.
  168. config ARM_SA1100_CPUFREQ
  169. bool
  170. config ARM_SA1110_CPUFREQ
  171. bool
  172. config ARM_SCPI_CPUFREQ
  173. tristate "SCPI based CPUfreq driver"
  174. depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
  175. help
  176. This adds the CPUfreq driver support for ARM big.LITTLE platforms
  177. using SCPI protocol for CPU power management.
  178. This driver uses SCPI Message Protocol driver to interact with the
  179. firmware providing the CPU DVFS functionality.
  180. config ARM_SPEAR_CPUFREQ
  181. bool "SPEAr CPUFreq support"
  182. depends on PLAT_SPEAR
  183. default y
  184. help
  185. This adds the CPUFreq driver support for SPEAr SOCs.
  186. config ARM_STI_CPUFREQ
  187. tristate "STi CPUFreq support"
  188. depends on SOC_STIH407
  189. help
  190. This driver uses the generic OPP framework to match the running
  191. platform with a predefined set of suitable values. If not provided
  192. we will fall-back so safe-values contained in Device Tree. Enable
  193. this config option if you wish to add CPUFreq support for STi based
  194. SoCs.
  195. config ARM_TEGRA20_CPUFREQ
  196. bool "Tegra20 CPUFreq support"
  197. depends on ARCH_TEGRA
  198. default y
  199. help
  200. This adds the CPUFreq driver support for Tegra20 SOCs.
  201. config ARM_TEGRA124_CPUFREQ
  202. tristate "Tegra124 CPUFreq support"
  203. depends on ARCH_TEGRA && CPUFREQ_DT && REGULATOR
  204. default y
  205. help
  206. This adds the CPUFreq driver support for Tegra124 SOCs.
  207. config ARM_PXA2xx_CPUFREQ
  208. tristate "Intel PXA2xx CPUfreq driver"
  209. depends on PXA27x || PXA25x
  210. help
  211. This add the CPUFreq driver support for Intel PXA2xx SOCs.
  212. If in doubt, say N.
  213. config ACPI_CPPC_CPUFREQ
  214. tristate "CPUFreq driver based on the ACPI CPPC spec"
  215. depends on ACPI
  216. select ACPI_CPPC_LIB
  217. default n
  218. help
  219. This adds a CPUFreq driver which uses CPPC methods
  220. as described in the ACPIv5.1 spec. CPPC stands for
  221. Collaborative Processor Performance Controls. It
  222. is based on an abstract continuous scale of CPU
  223. performance values which allows the remote power
  224. processor to flexibly optimize for power and
  225. performance. CPPC relies on power management firmware
  226. support for its operation.
  227. If in doubt, say N.