vmware.c 6.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214
  1. /*
  2. * VMware Detection code.
  3. *
  4. * Copyright (C) 2008, VMware, Inc.
  5. * Author : Alok N Kataria <akataria@vmware.com>
  6. *
  7. * This program is free software; you can redistribute it and/or modify
  8. * it under the terms of the GNU General Public License as published by
  9. * the Free Software Foundation; either version 2 of the License, or
  10. * (at your option) any later version.
  11. *
  12. * This program is distributed in the hope that it will be useful, but
  13. * WITHOUT ANY WARRANTY; without even the implied warranty of
  14. * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  15. * NON INFRINGEMENT. See the GNU General Public License for more
  16. * details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program; if not, write to the Free Software
  20. * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
  21. *
  22. */
  23. #include <linux/dmi.h>
  24. #include <linux/init.h>
  25. #include <linux/export.h>
  26. #include <linux/clocksource.h>
  27. #include <asm/div64.h>
  28. #include <asm/x86_init.h>
  29. #include <asm/hypervisor.h>
  30. #include <asm/timer.h>
  31. #include <asm/apic.h>
  32. #include <asm/timer.h>
  33. #undef pr_fmt
  34. #define pr_fmt(fmt) "vmware: " fmt
  35. #define CPUID_VMWARE_INFO_LEAF 0x40000000
  36. #define VMWARE_HYPERVISOR_MAGIC 0x564D5868
  37. #define VMWARE_HYPERVISOR_PORT 0x5658
  38. #define VMWARE_PORT_CMD_GETVERSION 10
  39. #define VMWARE_PORT_CMD_GETHZ 45
  40. #define VMWARE_PORT_CMD_GETVCPU_INFO 68
  41. #define VMWARE_PORT_CMD_LEGACY_X2APIC 3
  42. #define VMWARE_PORT_CMD_VCPU_RESERVED 31
  43. #define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
  44. __asm__("inl (%%dx)" : \
  45. "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
  46. "0"(VMWARE_HYPERVISOR_MAGIC), \
  47. "1"(VMWARE_PORT_CMD_##cmd), \
  48. "2"(VMWARE_HYPERVISOR_PORT), "3"(UINT_MAX) : \
  49. "memory");
  50. static unsigned long vmware_tsc_khz __ro_after_init;
  51. static inline int __vmware_platform(void)
  52. {
  53. uint32_t eax, ebx, ecx, edx;
  54. VMWARE_PORT(GETVERSION, eax, ebx, ecx, edx);
  55. return eax != (uint32_t)-1 && ebx == VMWARE_HYPERVISOR_MAGIC;
  56. }
  57. static unsigned long vmware_get_tsc_khz(void)
  58. {
  59. return vmware_tsc_khz;
  60. }
  61. #ifdef CONFIG_PARAVIRT
  62. static struct cyc2ns_data vmware_cyc2ns __ro_after_init;
  63. static int vmw_sched_clock __initdata = 1;
  64. static __init int setup_vmw_sched_clock(char *s)
  65. {
  66. vmw_sched_clock = 0;
  67. return 0;
  68. }
  69. early_param("no-vmw-sched-clock", setup_vmw_sched_clock);
  70. static unsigned long long vmware_sched_clock(void)
  71. {
  72. unsigned long long ns;
  73. ns = mul_u64_u32_shr(rdtsc(), vmware_cyc2ns.cyc2ns_mul,
  74. vmware_cyc2ns.cyc2ns_shift);
  75. ns -= vmware_cyc2ns.cyc2ns_offset;
  76. return ns;
  77. }
  78. static void __init vmware_sched_clock_setup(void)
  79. {
  80. struct cyc2ns_data *d = &vmware_cyc2ns;
  81. unsigned long long tsc_now = rdtsc();
  82. clocks_calc_mult_shift(&d->cyc2ns_mul, &d->cyc2ns_shift,
  83. vmware_tsc_khz, NSEC_PER_MSEC, 0);
  84. d->cyc2ns_offset = mul_u64_u32_shr(tsc_now, d->cyc2ns_mul,
  85. d->cyc2ns_shift);
  86. pv_time_ops.sched_clock = vmware_sched_clock;
  87. pr_info("using sched offset of %llu ns\n", d->cyc2ns_offset);
  88. }
  89. static void __init vmware_paravirt_ops_setup(void)
  90. {
  91. pv_info.name = "VMware hypervisor";
  92. pv_cpu_ops.io_delay = paravirt_nop;
  93. if (vmware_tsc_khz && vmw_sched_clock)
  94. vmware_sched_clock_setup();
  95. }
  96. #else
  97. #define vmware_paravirt_ops_setup() do {} while (0)
  98. #endif
  99. static void __init vmware_platform_setup(void)
  100. {
  101. uint32_t eax, ebx, ecx, edx;
  102. uint64_t lpj, tsc_khz;
  103. VMWARE_PORT(GETHZ, eax, ebx, ecx, edx);
  104. if (ebx != UINT_MAX) {
  105. lpj = tsc_khz = eax | (((uint64_t)ebx) << 32);
  106. do_div(tsc_khz, 1000);
  107. WARN_ON(tsc_khz >> 32);
  108. pr_info("TSC freq read from hypervisor : %lu.%03lu MHz\n",
  109. (unsigned long) tsc_khz / 1000,
  110. (unsigned long) tsc_khz % 1000);
  111. if (!preset_lpj) {
  112. do_div(lpj, HZ);
  113. preset_lpj = lpj;
  114. }
  115. vmware_tsc_khz = tsc_khz;
  116. x86_platform.calibrate_tsc = vmware_get_tsc_khz;
  117. x86_platform.calibrate_cpu = vmware_get_tsc_khz;
  118. #ifdef CONFIG_X86_LOCAL_APIC
  119. /* Skip lapic calibration since we know the bus frequency. */
  120. lapic_timer_frequency = ecx / HZ;
  121. pr_info("Host bus clock speed read from hypervisor : %u Hz\n",
  122. ecx);
  123. #endif
  124. } else {
  125. pr_warn("Failed to get TSC freq from the hypervisor\n");
  126. }
  127. vmware_paravirt_ops_setup();
  128. #ifdef CONFIG_X86_IO_APIC
  129. no_timer_check = 1;
  130. #endif
  131. }
  132. /*
  133. * While checking the dmi string information, just checking the product
  134. * serial key should be enough, as this will always have a VMware
  135. * specific string when running under VMware hypervisor.
  136. */
  137. static uint32_t __init vmware_platform(void)
  138. {
  139. if (boot_cpu_has(X86_FEATURE_HYPERVISOR)) {
  140. unsigned int eax;
  141. unsigned int hyper_vendor_id[3];
  142. cpuid(CPUID_VMWARE_INFO_LEAF, &eax, &hyper_vendor_id[0],
  143. &hyper_vendor_id[1], &hyper_vendor_id[2]);
  144. if (!memcmp(hyper_vendor_id, "VMwareVMware", 12))
  145. return CPUID_VMWARE_INFO_LEAF;
  146. } else if (dmi_available && dmi_name_in_serial("VMware") &&
  147. __vmware_platform())
  148. return 1;
  149. return 0;
  150. }
  151. /*
  152. * VMware hypervisor takes care of exporting a reliable TSC to the guest.
  153. * Still, due to timing difference when running on virtual cpus, the TSC can
  154. * be marked as unstable in some cases. For example, the TSC sync check at
  155. * bootup can fail due to a marginal offset between vcpus' TSCs (though the
  156. * TSCs do not drift from each other). Also, the ACPI PM timer clocksource
  157. * is not suitable as a watchdog when running on a hypervisor because the
  158. * kernel may miss a wrap of the counter if the vcpu is descheduled for a
  159. * long time. To skip these checks at runtime we set these capability bits,
  160. * so that the kernel could just trust the hypervisor with providing a
  161. * reliable virtual TSC that is suitable for timekeeping.
  162. */
  163. static void vmware_set_cpu_features(struct cpuinfo_x86 *c)
  164. {
  165. set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
  166. set_cpu_cap(c, X86_FEATURE_TSC_RELIABLE);
  167. }
  168. /* Checks if hypervisor supports x2apic without VT-D interrupt remapping. */
  169. static bool __init vmware_legacy_x2apic_available(void)
  170. {
  171. uint32_t eax, ebx, ecx, edx;
  172. VMWARE_PORT(GETVCPU_INFO, eax, ebx, ecx, edx);
  173. return (eax & (1 << VMWARE_PORT_CMD_VCPU_RESERVED)) == 0 &&
  174. (eax & (1 << VMWARE_PORT_CMD_LEGACY_X2APIC)) != 0;
  175. }
  176. const __refconst struct hypervisor_x86 x86_hyper_vmware = {
  177. .name = "VMware",
  178. .detect = vmware_platform,
  179. .set_cpu_features = vmware_set_cpu_features,
  180. .init_platform = vmware_platform_setup,
  181. .x2apic_available = vmware_legacy_x2apic_available,
  182. };
  183. EXPORT_SYMBOL(x86_hyper_vmware);