linux_kernel/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h

/*
 *  Copyright (c) 2000-2014 LSI Corporation.
 *
 *
 *           Name:  mpi2_cnfg.h
 *          Title:  MPI Configuration messages and pages
 *  Creation Date:  November 10, 2006
 *
 *    mpi2_cnfg.h Version:  02.00.29
 *
 *  Version History
 *  ---------------
 *
 *  Date      Version   Description
 *  --------  --------  ------------------------------------------------------
 *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
 *  06-04-07  02.00.01  Added defines for SAS IO Unit Page 2 PhyFlags.
 *                      Added Manufacturing Page 11.
 *                      Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
 *                      define.
 *  06-26-07  02.00.02  Adding generic structure for product-specific
 *                      Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
 *                      Rework of BIOS Page 2 configuration page.
 *                      Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
 *                      forms.
 *                      Added configuration pages IOC Page 8 and Driver
 *                      Persistent Mapping Page 0.
 *  08-31-07  02.00.03  Modified configuration pages dealing with Integrated
 *                      RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
 *                      RAID Physical Disk Pages 0 and 1, RAID Configuration
 *                      Page 0).
 *                      Added new value for AccessStatus field of SAS Device
 *                      Page 0 (_SATA_NEEDS_INITIALIZATION).
 *  10-31-07  02.00.04  Added missing SEPDevHandle field to
 *                      MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
 *  12-18-07  02.00.05  Modified IO Unit Page 0 to use 32-bit version fields for
 *                      NVDATA.
 *                      Modified IOC Page 7 to use masks and added field for
 *                      SASBroadcastPrimitiveMasks.
 *                      Added MPI2_CONFIG_PAGE_BIOS_4.
 *                      Added MPI2_CONFIG_PAGE_LOG_0.
 *  02-29-08  02.00.06  Modified various names to make them 32-character unique.
 *                      Added SAS Device IDs.
 *                      Updated Integrated RAID configuration pages including
 *                      Manufacturing Page 4, IOC Page 6, and RAID Configuration
 *                      Page 0.
 *  05-21-08  02.00.07  Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
 *                      Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
 *                      Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
 *                      Added missing MaxNumRoutedSasAddresses field to
 *                      MPI2_CONFIG_PAGE_EXPANDER_0.
 *                      Added SAS Port Page 0.
 *                      Modified structure layout for
 *                      MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
 *  06-27-08  02.00.08  Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
 *                      MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
 *  10-02-08  02.00.09  Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
 *                      to 0x000000FF.
 *                      Added two new values for the Physical Disk Coercion Size
 *                      bits in the Flags field of Manufacturing Page 4.
 *                      Added product-specific Manufacturing pages 16 to 31.
 *                      Modified Flags bits for controlling write cache on SATA
 *                      drives in IO Unit Page 1.
 *                      Added new bit to AdditionalControlFlags of SAS IO Unit
 *                      Page 1 to control Invalid Topology Correction.
 *                      Added additional defines for RAID Volume Page 0
 *                      VolumeStatusFlags field.
 *                      Modified meaning of RAID Volume Page 0 VolumeSettings
 *                      define for auto-configure of hot-swap drives.
 *                      Added SupportedPhysDisks field to RAID Volume Page 1 and
 *                      added related defines.
 *                      Added PhysDiskAttributes field (and related defines) to
 *                      RAID Physical Disk Page 0.
 *                      Added MPI2_SAS_PHYINFO_PHY_VACANT define.
 *                      Added three new DiscoveryStatus bits for SAS IO Unit
 *                      Page 0 and SAS Expander Page 0.
 *                      Removed multiplexing information from SAS IO Unit pages.
 *                      Added BootDeviceWaitTime field to SAS IO Unit Page 4.
 *                      Removed Zone Address Resolved bit from PhyInfo and from
 *                      Expander Page 0 Flags field.
 *                      Added two new AccessStatus values to SAS Device Page 0
 *                      for indicating routing problems. Added 3 reserved words
 *                      to this page.
 *  01-19-09  02.00.10  Fixed defines for GPIOVal field of IO Unit Page 3.
 *                      Inserted missing reserved field into structure for IOC
 *                      Page 6.
 *                      Added more pending task bits to RAID Volume Page 0
 *                      VolumeStatusFlags defines.
 *                      Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
 *                      Added a new DiscoveryStatus bit for SAS IO Unit Page 0
 *                      and SAS Expander Page 0 to flag a downstream initiator
 *                      when in simplified routing mode.
 *                      Removed SATA Init Failure defines for DiscoveryStatus
 *                      fields of SAS IO Unit Page 0 and SAS Expander Page 0.
 *                      Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
 *                      Added PortGroups, DmaGroup, and ControlGroup fields to
 *                      SAS Device Page 0.
 *  05-06-09  02.00.11  Added structures and defines for IO Unit Page 5 and IO
 *                      Unit Page 6.
 *                      Added expander reduced functionality data to SAS
 *                      Expander Page 0.
 *                      Added SAS PHY Page 2 and SAS PHY Page 3.
 *  07-30-09  02.00.12  Added IO Unit Page 7.
 *                      Added new device ids.
 *                      Added SAS IO Unit Page 5.
 *                      Added partial and slumber power management capable flags
 *                      to SAS Device Page 0 Flags field.
 *                      Added PhyInfo defines for power condition.
 *                      Added Ethernet configuration pages.
 *  10-28-09  02.00.13  Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
 *                      Added SAS PHY Page 4 structure and defines.
 *  02-10-10  02.00.14  Modified the comments for the configuration page
 *                      structures that contain an array of data. The host
 *                      should use the "count" field in the page data (e.g. the
 *                      NumPhys field) to determine the number of valid elements
 *                      in the array.
 *                      Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
 *                      Added PowerManagementCapabilities to IO Unit Page 7.
 *                      Added PortWidthModGroup field to
 *                      MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS.
 *                      Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
 *                      Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
 *                      Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
 *  05-12-10  02.00.15  Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT
 *                      define.
 *                      Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define.
 *                      Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define.
 *  08-11-10  02.00.16  Removed IO Unit Page 1 device path (multi-pathing)
 *                      defines.
 *  11-10-10  02.00.17  Added ReceptacleID field (replacing Reserved1) to
 *                      MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for
 *                      the Pinout field.
 *                      Added BoardTemperature and BoardTemperatureUnits fields
 *                      to MPI2_CONFIG_PAGE_IO_UNIT_7.
 *                      Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
 *                      and MPI2_CONFIG_PAGE_EXT_MAN_PS structure.
 *  02-23-11  02.00.18  Added ProxyVF_ID field to MPI2_CONFIG_REQUEST.
 *                      Added IO Unit Page 8, IO Unit Page 9,
 *                      and IO Unit Page 10.
 *                      Added SASNotifyPrimitiveMasks field to
 *                      MPI2_CONFIG_PAGE_IOC_7.
 *  03-09-11  02.00.19  Fixed IO Unit Page 10 (to match the spec).
 *  05-25-11  02.00.20  Cleaned up a few comments.
 *  08-24-11  02.00.21  Marked the IO Unit Page 7 PowerManagementCapabilities
 *                      for PCIe link as obsolete.
 *                      Added SpinupFlags field containing a Disable Spin-up
 *                      bit to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of
 *                      SAS IO Unit Page 4.
 *  11-18-11  02.00.22  Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT.
 *                      Added UEFIVersion field to BIOS Page 1 and defined new
 *                      BiosOptions bits.
 *  11-27-12  02.00.23  Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER.
 *			Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID.
 *  12-20-12  02.00.24  Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as
 *			obsolete for MPI v2.5 and later.
 *			Added some defines for 12G SAS speeds.
 *  04-09-13  02.00.25  Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK.
 *			Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to
 *			match the specification.
 *  12-05-13  02.00.27  Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for
 *			MPI2_CONFIG_PAGE_MAN_7.
 *			Added EnclosureLevel and ConnectorName fields to
 *			MPI2_CONFIG_PAGE_SAS_DEV_0.
 *			Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for
 *			MPI2_CONFIG_PAGE_SAS_DEV_0.
 *			Added EnclosureLevel field to
 *			MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
 *			Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for
 *			MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
 *  01-08-14  02.00.28  Added more defines for the BiosOptions field of
 *			MPI2_CONFIG_PAGE_BIOS_1.
 *  06-13-14  02.00.29  Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and
 *			more defines for the BiosOptions field.
 *  --------------------------------------------------------------------------
 */

#ifndef MPI2_CNFG_H
#define MPI2_CNFG_H

/*****************************************************************************
*   Configuration Page Header and defines
*****************************************************************************/

/* Config Page Header */
typedef struct _MPI2_CONFIG_PAGE_HEADER
{
    U8                 PageVersion;                /* 0x00 */
    U8                 PageLength;                 /* 0x01 */
    U8                 PageNumber;                 /* 0x02 */
    U8                 PageType;                   /* 0x03 */
} MPI2_CONFIG_PAGE_HEADER, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER,
  Mpi2ConfigPageHeader_t, MPI2_POINTER pMpi2ConfigPageHeader_t;

typedef union _MPI2_CONFIG_PAGE_HEADER_UNION
{
   MPI2_CONFIG_PAGE_HEADER  Struct;
   U8                       Bytes[4];
   U16                      Word16[2];
   U32                      Word32;
} MPI2_CONFIG_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER_UNION,
  Mpi2ConfigPageHeaderUnion, MPI2_POINTER pMpi2ConfigPageHeaderUnion;

/* Extended Config Page Header */
typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER
{
    U8                  PageVersion;                /* 0x00 */
    U8                  Reserved1;                  /* 0x01 */
    U8                  PageNumber;                 /* 0x02 */
    U8                  PageType;                   /* 0x03 */
    U16                 ExtPageLength;              /* 0x04 */
    U8                  ExtPageType;                /* 0x06 */
    U8                  Reserved2;                  /* 0x07 */
} MPI2_CONFIG_EXTENDED_PAGE_HEADER,
  MPI2_POINTER PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER,
  Mpi2ConfigExtendedPageHeader_t, MPI2_POINTER pMpi2ConfigExtendedPageHeader_t;

typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION
{
   MPI2_CONFIG_PAGE_HEADER          Struct;
   MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext;
   U8                               Bytes[8];
   U16                              Word16[4];
   U32                              Word32[2];
} MPI2_CONFIG_EXT_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
  Mpi2ConfigPageExtendedHeaderUnion, MPI2_POINTER pMpi2ConfigPageExtendedHeaderUnion;


/* PageType field values */
#define MPI2_CONFIG_PAGEATTR_READ_ONLY              (0x00)
#define MPI2_CONFIG_PAGEATTR_CHANGEABLE             (0x10)
#define MPI2_CONFIG_PAGEATTR_PERSISTENT             (0x20)
#define MPI2_CONFIG_PAGEATTR_MASK                   (0xF0)

#define MPI2_CONFIG_PAGETYPE_IO_UNIT                (0x00)
#define MPI2_CONFIG_PAGETYPE_IOC                    (0x01)
#define MPI2_CONFIG_PAGETYPE_BIOS                   (0x02)
#define MPI2_CONFIG_PAGETYPE_RAID_VOLUME            (0x08)
#define MPI2_CONFIG_PAGETYPE_MANUFACTURING          (0x09)
#define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK          (0x0A)
#define MPI2_CONFIG_PAGETYPE_EXTENDED               (0x0F)
#define MPI2_CONFIG_PAGETYPE_MASK                   (0x0F)

#define MPI2_CONFIG_TYPENUM_MASK                    (0x0FFF)


/* ExtPageType field values */
#define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT         (0x10)
#define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER        (0x11)
#define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE          (0x12)
#define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY             (0x13)
#define MPI2_CONFIG_EXTPAGETYPE_LOG                 (0x14)
#define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE           (0x15)
#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG         (0x16)
#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING      (0x17)
#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT            (0x18)
#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET            (0x19)
#define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING   (0x1A)


/*****************************************************************************
*   PageAddress defines
*****************************************************************************/

/* RAID Volume PageAddress format */
#define MPI2_RAID_VOLUME_PGAD_FORM_MASK             (0xF0000000)
#define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE  (0x00000000)
#define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE           (0x10000000)

#define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK           (0x0000FFFF)


/* RAID Physical Disk PageAddress format */
#define MPI2_PHYSDISK_PGAD_FORM_MASK                    (0xF0000000)
#define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM    (0x00000000)
#define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM             (0x10000000)
#define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE               (0x20000000)

#define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK             (0x000000FF)
#define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK               (0x0000FFFF)


/* SAS Expander PageAddress format */
#define MPI2_SAS_EXPAND_PGAD_FORM_MASK              (0xF0000000)
#define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL     (0x00000000)
#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM      (0x10000000)
#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL              (0x20000000)

#define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK            (0x0000FFFF)
#define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK            (0x00FF0000)
#define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT           (16)


/* SAS Device PageAddress format */
#define MPI2_SAS_DEVICE_PGAD_FORM_MASK              (0xF0000000)
#define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE   (0x00000000)
#define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE            (0x20000000)

#define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK            (0x0000FFFF)


/* SAS PHY PageAddress format */
#define MPI2_SAS_PHY_PGAD_FORM_MASK                 (0xF0000000)
#define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER           (0x00000000)
#define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX        (0x10000000)

#define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK           (0x000000FF)
#define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK        (0x0000FFFF)


/* SAS Port PageAddress format */
#define MPI2_SASPORT_PGAD_FORM_MASK                 (0xF0000000)
#define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT        (0x00000000)
#define MPI2_SASPORT_PGAD_FORM_PORT_NUM             (0x10000000)

#define MPI2_SASPORT_PGAD_PORTNUMBER_MASK           (0x00000FFF)


/* SAS Enclosure PageAddress format */
#define MPI2_SAS_ENCLOS_PGAD_FORM_MASK              (0xF0000000)
#define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE   (0x00000000)
#define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE            (0x10000000)

#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK            (0x0000FFFF)


/* RAID Configuration PageAddress format */
#define MPI2_RAID_PGAD_FORM_MASK                    (0xF0000000)
#define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM      (0x00000000)
#define MPI2_RAID_PGAD_FORM_CONFIGNUM               (0x10000000)
#define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG           (0x20000000)

#define MPI2_RAID_PGAD_CONFIGNUM_MASK               (0x000000FF)


/* Driver Persistent Mapping PageAddress format */
#define MPI2_DPM_PGAD_FORM_MASK                     (0xF0000000)
#define MPI2_DPM_PGAD_FORM_ENTRY_RANGE              (0x00000000)

#define MPI2_DPM_PGAD_ENTRY_COUNT_MASK              (0x0FFF0000)
#define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT             (16)
#define MPI2_DPM_PGAD_START_ENTRY_MASK              (0x0000FFFF)


/* Ethernet PageAddress format */
#define MPI2_ETHERNET_PGAD_FORM_MASK                (0xF0000000)
#define MPI2_ETHERNET_PGAD_FORM_IF_NUM              (0x00000000)

#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK           (0x000000FF)



/****************************************************************************
*   Configuration messages
****************************************************************************/

/* Configuration Request Message */
typedef struct _MPI2_CONFIG_REQUEST
{
    U8                      Action;                     /* 0x00 */
    U8                      SGLFlags;                   /* 0x01 */
    U8                      ChainOffset;                /* 0x02 */
    U8                      Function;                   /* 0x03 */
    U16                     ExtPageLength;              /* 0x04 */
    U8                      ExtPageType;                /* 0x06 */
    U8                      MsgFlags;                   /* 0x07 */
    U8                      VP_ID;                      /* 0x08 */
    U8                      VF_ID;                      /* 0x09 */
    U16                     Reserved1;                  /* 0x0A */
	U8                      Reserved2;                  /* 0x0C */
	U8                      ProxyVF_ID;                 /* 0x0D */
	U16                     Reserved4;                  /* 0x0E */
    U32                     Reserved3;                  /* 0x10 */
    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x14 */
    U32                     PageAddress;                /* 0x18 */
    MPI2_SGE_IO_UNION       PageBufferSGE;              /* 0x1C */
} MPI2_CONFIG_REQUEST, MPI2_POINTER PTR_MPI2_CONFIG_REQUEST,
  Mpi2ConfigRequest_t, MPI2_POINTER pMpi2ConfigRequest_t;

/* values for the Action field */
#define MPI2_CONFIG_ACTION_PAGE_HEADER              (0x00)
#define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT        (0x01)
#define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT       (0x02)
#define MPI2_CONFIG_ACTION_PAGE_DEFAULT             (0x03)
#define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM         (0x04)
#define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT        (0x05)
#define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM          (0x06)
#define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE      (0x07)

/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */


/* Config Reply Message */
typedef struct _MPI2_CONFIG_REPLY
{
    U8                      Action;                     /* 0x00 */
    U8                      SGLFlags;                   /* 0x01 */
    U8                      MsgLength;                  /* 0x02 */
    U8                      Function;                   /* 0x03 */
    U16                     ExtPageLength;              /* 0x04 */
    U8                      ExtPageType;                /* 0x06 */
    U8                      MsgFlags;                   /* 0x07 */
    U8                      VP_ID;                      /* 0x08 */
    U8                      VF_ID;                      /* 0x09 */
    U16                     Reserved1;                  /* 0x0A */
    U16                     Reserved2;                  /* 0x0C */
    U16                     IOCStatus;                  /* 0x0E */
    U32                     IOCLogInfo;                 /* 0x10 */
    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x14 */
} MPI2_CONFIG_REPLY, MPI2_POINTER PTR_MPI2_CONFIG_REPLY,
  Mpi2ConfigReply_t, MPI2_POINTER pMpi2ConfigReply_t;



/*****************************************************************************
*
*               C o n f i g u r a t i o n    P a g e s
*
*****************************************************************************/

/****************************************************************************
*   Manufacturing Config pages
****************************************************************************/

#define MPI2_MFGPAGE_VENDORID_LSI                   (0x1000)

/* SAS */
#define MPI2_MFGPAGE_DEVID_SAS2004                  (0x0070)
#define MPI2_MFGPAGE_DEVID_SAS2008                  (0x0072)
#define MPI2_MFGPAGE_DEVID_SAS2108_1                (0x0074)
#define MPI2_MFGPAGE_DEVID_SAS2108_2                (0x0076)
#define MPI2_MFGPAGE_DEVID_SAS2108_3                (0x0077)
#define MPI2_MFGPAGE_DEVID_SAS2116_1                (0x0064)
#define MPI2_MFGPAGE_DEVID_SAS2116_2                (0x0065)

#define MPI2_MFGPAGE_DEVID_SSS6200                  (0x007E)

#define MPI2_MFGPAGE_DEVID_SAS2208_1                (0x0080)
#define MPI2_MFGPAGE_DEVID_SAS2208_2                (0x0081)
#define MPI2_MFGPAGE_DEVID_SAS2208_3                (0x0082)
#define MPI2_MFGPAGE_DEVID_SAS2208_4                (0x0083)
#define MPI2_MFGPAGE_DEVID_SAS2208_5                (0x0084)
#define MPI2_MFGPAGE_DEVID_SAS2208_6                (0x0085)
#define MPI2_MFGPAGE_DEVID_SAS2308_1                (0x0086)
#define MPI2_MFGPAGE_DEVID_SAS2308_2                (0x0087)
#define MPI2_MFGPAGE_DEVID_SAS2308_3                (0x006E)




/* Manufacturing Page 0 */

typedef struct _MPI2_CONFIG_PAGE_MAN_0
{
    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
    U8                      ChipName[16];               /* 0x04 */
    U8                      ChipRevision[8];            /* 0x14 */
    U8                      BoardName[16];              /* 0x1C */
    U8                      BoardAssembly[16];          /* 0x2C */
    U8                      BoardTracerNumber[16];      /* 0x3C */
} MPI2_CONFIG_PAGE_MAN_0,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_0,
  Mpi2ManufacturingPage0_t, MPI2_POINTER pMpi2ManufacturingPage0_t;

#define MPI2_MANUFACTURING0_PAGEVERSION                (0x00)


/* Manufacturing Page 1 */

typedef struct _MPI2_CONFIG_PAGE_MAN_1
{
    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
    U8                      VPD[256];                   /* 0x04 */
} MPI2_CONFIG_PAGE_MAN_1,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_1,
  Mpi2ManufacturingPage1_t, MPI2_POINTER pMpi2ManufacturingPage1_t;

#define MPI2_MANUFACTURING1_PAGEVERSION                (0x00)


typedef struct _MPI2_CHIP_REVISION_ID
{
    U16 DeviceID;                                       /* 0x00 */
    U8  PCIRevisionID;                                  /* 0x02 */
    U8  Reserved;                                       /* 0x03 */
} MPI2_CHIP_REVISION_ID, MPI2_POINTER PTR_MPI2_CHIP_REVISION_ID,
  Mpi2ChipRevisionId_t, MPI2_POINTER pMpi2ChipRevisionId_t;


/* Manufacturing Page 2 */

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check Header.PageLength at runtime.
 */
#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS
#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS   (1)
#endif

typedef struct _MPI2_CONFIG_PAGE_MAN_2
{
    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
    MPI2_CHIP_REVISION_ID   ChipId;                     /* 0x04 */
    U32                     HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 0x08 */
} MPI2_CONFIG_PAGE_MAN_2,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_2,
  Mpi2ManufacturingPage2_t, MPI2_POINTER pMpi2ManufacturingPage2_t;

#define MPI2_MANUFACTURING2_PAGEVERSION                 (0x00)


/* Manufacturing Page 3 */

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check Header.PageLength at runtime.
 */
#ifndef MPI2_MAN_PAGE_3_INFO_WORDS
#define MPI2_MAN_PAGE_3_INFO_WORDS          (1)
#endif

typedef struct _MPI2_CONFIG_PAGE_MAN_3
{
    MPI2_CONFIG_PAGE_HEADER             Header;         /* 0x00 */
    MPI2_CHIP_REVISION_ID               ChipId;         /* 0x04 */
    U32                                 Info[MPI2_MAN_PAGE_3_INFO_WORDS];/* 0x08 */
} MPI2_CONFIG_PAGE_MAN_3,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_3,
  Mpi2ManufacturingPage3_t, MPI2_POINTER pMpi2ManufacturingPage3_t;

#define MPI2_MANUFACTURING3_PAGEVERSION                 (0x00)


/* Manufacturing Page 4 */

typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS
{
    U8                          PowerSaveFlags;                 /* 0x00 */
    U8                          InternalOperationsSleepTime;    /* 0x01 */
    U8                          InternalOperationsRunTime;      /* 0x02 */
    U8                          HostIdleTime;                   /* 0x03 */
} MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
  MPI2_POINTER PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
  Mpi2ManPage4PwrSaveSettings_t, MPI2_POINTER pMpi2ManPage4PwrSaveSettings_t;

/* defines for the PowerSaveFlags field */
#define MPI2_MANPAGE4_MASK_POWERSAVE_MODE               (0x03)
#define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED           (0x00)
#define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE             (0x01)
#define MPI2_MANPAGE4_FULL_POWERSAVE_MODE               (0x02)

typedef struct _MPI2_CONFIG_PAGE_MAN_4
{
    MPI2_CONFIG_PAGE_HEADER             Header;                 /* 0x00 */
    U32                                 Reserved1;              /* 0x04 */
    U32                                 Flags;                  /* 0x08 */
    U8                                  InquirySize;            /* 0x0C */
    U8                                  Reserved2;              /* 0x0D */
    U16                                 Reserved3;              /* 0x0E */
    U8                                  InquiryData[56];        /* 0x10 */
    U32                                 RAID0VolumeSettings;    /* 0x48 */
    U32                                 RAID1EVolumeSettings;   /* 0x4C */
    U32                                 RAID1VolumeSettings;    /* 0x50 */
    U32                                 RAID10VolumeSettings;   /* 0x54 */
    U32                                 Reserved4;              /* 0x58 */
    U32                                 Reserved5;              /* 0x5C */
    MPI2_MANPAGE4_PWR_SAVE_SETTINGS     PowerSaveSettings;      /* 0x60 */
    U8                                  MaxOCEDisks;            /* 0x64 */
    U8                                  ResyncRate;             /* 0x65 */
    U16                                 DataScrubDuration;      /* 0x66 */
    U8                                  MaxHotSpares;           /* 0x68 */
    U8                                  MaxPhysDisksPerVol;     /* 0x69 */
    U8                                  MaxPhysDisks;           /* 0x6A */
    U8                                  MaxVolumes;             /* 0x6B */
} MPI2_CONFIG_PAGE_MAN_4,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_4,
  Mpi2ManufacturingPage4_t, MPI2_POINTER pMpi2ManufacturingPage4_t;

#define MPI2_MANUFACTURING4_PAGEVERSION                 (0x0A)

/* Manufacturing Page 4 Flags field */
#define MPI2_MANPAGE4_METADATA_SIZE_MASK                (0x00030000)
#define MPI2_MANPAGE4_METADATA_512MB                    (0x00000000)

#define MPI2_MANPAGE4_MIX_SSD_SAS_SATA                  (0x00008000)
#define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD               (0x00004000)
#define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR              (0x00002000)

#define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION            (0x00001C00)
#define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB             (0x00000000)
#define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION           (0x00000400)
#define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION        (0x00000800)
#define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION            (0x00000C00)

#define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING            (0x00000300)
#define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING         (0x00000000)
#define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING           (0x00000100)
#define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING      (0x00000200)

#define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER            (0x00000080)
#define MPI2_MANPAGE4_RAID10_DISABLE                    (0x00000040)
#define MPI2_MANPAGE4_RAID1E_DISABLE                    (0x00000020)
#define MPI2_MANPAGE4_RAID1_DISABLE                     (0x00000010)
#define MPI2_MANPAGE4_RAID0_DISABLE                     (0x00000008)
#define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE              (0x00000004)
#define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE            (0x00000002)
#define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA                (0x00000001)


/* Manufacturing Page 5 */

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumPhys at runtime.
 */
#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES
#define MPI2_MAN_PAGE_5_PHY_ENTRIES         (1)
#endif

typedef struct _MPI2_MANUFACTURING5_ENTRY
{
    U64                                 WWID;           /* 0x00 */
    U64                                 DeviceName;     /* 0x08 */
} MPI2_MANUFACTURING5_ENTRY, MPI2_POINTER PTR_MPI2_MANUFACTURING5_ENTRY,
  Mpi2Manufacturing5Entry_t, MPI2_POINTER pMpi2Manufacturing5Entry_t;

typedef struct _MPI2_CONFIG_PAGE_MAN_5
{
    MPI2_CONFIG_PAGE_HEADER             Header;         /* 0x00 */
    U8                                  NumPhys;        /* 0x04 */
    U8                                  Reserved1;      /* 0x05 */
    U16                                 Reserved2;      /* 0x06 */
    U32                                 Reserved3;      /* 0x08 */
    U32                                 Reserved4;      /* 0x0C */
    MPI2_MANUFACTURING5_ENTRY           Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/* 0x08 */
} MPI2_CONFIG_PAGE_MAN_5,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_5,
  Mpi2ManufacturingPage5_t, MPI2_POINTER pMpi2ManufacturingPage5_t;

#define MPI2_MANUFACTURING5_PAGEVERSION                 (0x03)


/* Manufacturing Page 6 */

typedef struct _MPI2_CONFIG_PAGE_MAN_6
{
    MPI2_CONFIG_PAGE_HEADER         Header;             /* 0x00 */
    U32                             ProductSpecificInfo;/* 0x04 */
} MPI2_CONFIG_PAGE_MAN_6,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_6,
  Mpi2ManufacturingPage6_t, MPI2_POINTER pMpi2ManufacturingPage6_t;

#define MPI2_MANUFACTURING6_PAGEVERSION                 (0x00)


/* Manufacturing Page 7 */

typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO
{
    U32                         Pinout;                 /* 0x00 */
    U8                          Connector[16];          /* 0x04 */
    U8                          Location;               /* 0x14 */
	U8                          ReceptacleID;           /* 0x15 */
    U16                         Slot;                   /* 0x16 */
    U32                         Reserved2;              /* 0x18 */
} MPI2_MANPAGE7_CONNECTOR_INFO, MPI2_POINTER PTR_MPI2_MANPAGE7_CONNECTOR_INFO,
  Mpi2ManPage7ConnectorInfo_t, MPI2_POINTER pMpi2ManPage7ConnectorInfo_t;

/* defines for the Pinout field */
#define MPI2_MANPAGE7_PINOUT_LANE_MASK                  (0x0000FF00)
#define MPI2_MANPAGE7_PINOUT_LANE_SHIFT                 (8)

#define MPI2_MANPAGE7_PINOUT_TYPE_MASK                  (0x000000FF)
#define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN               (0x00)
#define MPI2_MANPAGE7_PINOUT_SATA_SINGLE                (0x01)
#define MPI2_MANPAGE7_PINOUT_SFF_8482                   (0x02)
#define MPI2_MANPAGE7_PINOUT_SFF_8486                   (0x03)
#define MPI2_MANPAGE7_PINOUT_SFF_8484                   (0x04)
#define MPI2_MANPAGE7_PINOUT_SFF_8087                   (0x05)
#define MPI2_MANPAGE7_PINOUT_SFF_8643_4I                (0x06)
#define MPI2_MANPAGE7_PINOUT_SFF_8643_8I                (0x07)
#define MPI2_MANPAGE7_PINOUT_SFF_8470                   (0x08)
#define MPI2_MANPAGE7_PINOUT_SFF_8088                   (0x09)
#define MPI2_MANPAGE7_PINOUT_SFF_8644_4X                (0x0A)
#define MPI2_MANPAGE7_PINOUT_SFF_8644_8X                (0x0B)
#define MPI2_MANPAGE7_PINOUT_SFF_8644_16X               (0x0C)
#define MPI2_MANPAGE7_PINOUT_SFF_8436                   (0x0D)

/* defines for the Location field */
#define MPI2_MANPAGE7_LOCATION_UNKNOWN                  (0x01)
#define MPI2_MANPAGE7_LOCATION_INTERNAL                 (0x02)
#define MPI2_MANPAGE7_LOCATION_EXTERNAL                 (0x04)
#define MPI2_MANPAGE7_LOCATION_SWITCHABLE               (0x08)
#define MPI2_MANPAGE7_LOCATION_AUTO                     (0x10)
#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT              (0x20)
#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED            (0x80)

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumPhys at runtime.
 */
#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX
#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX  (1)
#endif

typedef struct _MPI2_CONFIG_PAGE_MAN_7
{
    MPI2_CONFIG_PAGE_HEADER         Header;             /* 0x00 */
    U32                             Reserved1;          /* 0x04 */
    U32                             Reserved2;          /* 0x08 */
    U32                             Flags;              /* 0x0C */
    U8                              EnclosureName[16];  /* 0x10 */
    U8                              NumPhys;            /* 0x20 */
    U8                              Reserved3;          /* 0x21 */
    U16                             Reserved4;          /* 0x22 */
    MPI2_MANPAGE7_CONNECTOR_INFO    ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /* 0x24 */
} MPI2_CONFIG_PAGE_MAN_7,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_7,
  Mpi2ManufacturingPage7_t, MPI2_POINTER pMpi2ManufacturingPage7_t;

#define MPI2_MANUFACTURING7_PAGEVERSION                 (0x01)

/* defines for the Flags field */
#define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL         (0x00000008)
#define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER       (0x00000002)
#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO                (0x00000001)


/*
 * Generic structure to use for product-specific manufacturing pages
 * (currently Manufacturing Page 8 through Manufacturing Page 31).
 */

typedef struct _MPI2_CONFIG_PAGE_MAN_PS
{
    MPI2_CONFIG_PAGE_HEADER         Header;             /* 0x00 */
    U32                             ProductSpecificInfo;/* 0x04 */
} MPI2_CONFIG_PAGE_MAN_PS,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_PS,
  Mpi2ManufacturingPagePS_t, MPI2_POINTER pMpi2ManufacturingPagePS_t;

#define MPI2_MANUFACTURING8_PAGEVERSION                 (0x00)
#define MPI2_MANUFACTURING9_PAGEVERSION                 (0x00)
#define MPI2_MANUFACTURING10_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING11_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING12_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING13_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING14_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING15_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING16_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING17_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING18_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING19_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING20_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING21_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING22_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING23_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING24_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING25_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING26_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING27_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING28_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING29_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING30_PAGEVERSION                (0x00)
#define MPI2_MANUFACTURING31_PAGEVERSION                (0x00)


/****************************************************************************
*   IO Unit Config Pages
****************************************************************************/

/* IO Unit Page 0 */

typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0
{
    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
    U64                     UniqueValue;                /* 0x04 */
    MPI2_VERSION_UNION      NvdataVersionDefault;       /* 0x08 */
    MPI2_VERSION_UNION      NvdataVersionPersistent;    /* 0x0A */
} MPI2_CONFIG_PAGE_IO_UNIT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_0,
  Mpi2IOUnitPage0_t, MPI2_POINTER pMpi2IOUnitPage0_t;

#define MPI2_IOUNITPAGE0_PAGEVERSION                    (0x02)


/* IO Unit Page 1 */

typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1
{
    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
    U32                     Flags;                      /* 0x04 */
} MPI2_CONFIG_PAGE_IO_UNIT_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_1,
  Mpi2IOUnitPage1_t, MPI2_POINTER pMpi2IOUnitPage1_t;

#define MPI2_IOUNITPAGE1_PAGEVERSION                    (0x04)

/* IO Unit Page 1 Flags defines */
#define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK       (0x00004000)
#define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY    (0x00000800)
#define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE          (0x00000600)
#define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT         (9)
#define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE        (0x00000000)
#define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE       (0x00000200)
#define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE     (0x00000400)
#define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE       (0x00000100)
#define MPI2_IOUNITPAGE1_DISABLE_IR                     (0x00000040)
#define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020)
#define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID        (0x00000004)


/* IO Unit Page 3 */

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for GPIOCount at runtime.
 */
#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX
#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX    (1)
#endif

typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3
{
    MPI2_CONFIG_PAGE_HEADER Header;                                   /* 0x00 */
    U8                      GPIOCount;                                /* 0x04 */
    U8                      Reserved1;                                /* 0x05 */
    U16                     Reserved2;                                /* 0x06 */
    U16                     GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/* 0x08 */
} MPI2_CONFIG_PAGE_IO_UNIT_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_3,
  Mpi2IOUnitPage3_t, MPI2_POINTER pMpi2IOUnitPage3_t;

#define MPI2_IOUNITPAGE3_PAGEVERSION                    (0x01)

/* defines for IO Unit Page 3 GPIOVal field */
#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK             (0xFFFC)
#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT            (2)
#define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF               (0x0000)
#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON                (0x0001)


/* IO Unit Page 5 */

/*
 * Upper layer code (drivers, utilities, etc.) should leave this define set to
 * one and check the value returned for NumDmaEngines at runtime.
 */
#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES      (1)
#endif

typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {
    MPI2_CONFIG_PAGE_HEADER Header;				/* 0x00 */
    U64                     RaidAcceleratorBufferBaseAddress;  /* 0x04 */
    U64                     RaidAcceleratorBufferSize;         /* 0x0C */
    U64                     RaidAcceleratorControlBaseAddress; /* 0x14 */
    U8                      RAControlSize;                     /* 0x1C */
    U8                      NumDmaEngines;                     /* 0x1D */
    U8                      RAMinControlSize;                  /* 0x1E */
    U8                      RAMaxControlSize;                  /* 0x1F */
    U32                     Reserved1;                         /* 0x20 */
    U32                     Reserved2;                         /* 0x24 */
    U32                     Reserved3;                         /* 0x28 */
    U32                     DmaEngineCapabilities
				[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /* 0x2C */
} MPI2_CONFIG_PAGE_IO_UNIT_5, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_5,
  Mpi2IOUnitPage5_t, MPI2_POINTER pMpi2IOUnitPage5_t;

#define MPI2_IOUNITPAGE5_PAGEVERSION                    (0x00)

/* defines for IO Unit Page 5 DmaEngineCapabilities field */
#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS      (0xFFFF0000)
#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS     (16)

#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP                   (0x0008)
#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION      (0x0004)
#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING                (0x0002)
#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION             (0x0001)


/* IO Unit Page 6 */

typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 {
    MPI2_CONFIG_PAGE_HEADER Header;                                 /* 0x00 */
    U16                     Flags;                                  /* 0x04 */
    U8                      RAHostControlSize;                      /* 0x06 */
    U8                      Reserved0;                              /* 0x07 */
    U64                     RaidAcceleratorHostControlBaseAddress;  /* 0x08 */
    U32                     Reserved1;                              /* 0x10 */
    U32                     Reserved2;                              /* 0x14 */
    U32                     Reserved3;                              /* 0x18 */
} MPI2_CONFIG_PAGE_IO_UNIT_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_6,
  Mpi2IOUnitPage6_t, MPI2_POINTER pMpi2IOUnitPage6_t;

#define MPI2_IOUNITPAGE6_PAGEVERSION                    (0x00)

/* defines for IO Unit Page 6 Flags field */
#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR  (0x0001)


/* IO Unit Page 7 */

typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
    MPI2_CONFIG_PAGE_HEADER Header;                                 /* 0x00 */
    U16                     Reserved1;                              /* 0x04 */
    U8                      PCIeWidth;                              /* 0x06 */
    U8                      PCIeSpeed;                              /* 0x07 */
    U32                     ProcessorState;                         /* 0x08 */
    U32                     PowerManagementCapabilities;            /* 0x0C */
    U16                     IOCTemperature;                         /* 0x10 */
    U8                      IOCTemperatureUnits;                    /* 0x12 */
    U8                      IOCSpeed;                               /* 0x13 */
	U16                     BoardTemperature;		    /* 0x14 */
	U8                      BoardTemperatureUnits;		    /* 0x16 */
	U8                      Reserved3;			    /* 0x17 */
	U32                     Reserved4;                          /* 0x18 */
	U32                     Reserved5;                          /* 0x1C */
	U32                     Reserved6;                          /* 0x20 */
	U32                     Reserved7;                          /* 0x24 */
} MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
  Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t;

#define MPI2_IOUNITPAGE7_PAGEVERSION                    (0x04)

/* defines for IO Unit Page 7 PCIeWidth field */
#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1              (0x01)
#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2              (0x02)
#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4              (0x04)
#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8              (0x08)

/* defines for IO Unit Page 7 PCIeSpeed field */
#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS        (0x00)
#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS        (0x01)
#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS        (0x02)

/* defines for IO Unit Page 7 ProcessorState field */
#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND         (0x0000000F)
#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND        (0)

#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT         (0x00)
#define MPI2_IOUNITPAGE7_PSTATE_DISABLED            (0x01)
#define MPI2_IOUNITPAGE7_PSTATE_ENABLED             (0x02)

/* defines for IO Unit Page 7 PowerManagementCapabilities field */
#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED    (0x00000400)
#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED    (0x00000200)
#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED    (0x00000100)
#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE    (0x00000008) /* obsolete */
#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE    (0x00000004) /* obsolete */

/* defines for IO Unit Page 7 IOCTemperatureUnits field */
#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT       (0x00)
#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT        (0x01)
#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS           (0x02)

/* defines for IO Unit Page 7 IOCSpeed field */
#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL             (0x01)
#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF             (0x02)
#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER          (0x04)
#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH           (0x08)

/* defines for IO Unit Page 7 BoardTemperatureUnits field */
#define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT     (0x00)
#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT      (0x01)
#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS         (0x02)

/* IO Unit Page 8 */

#define MPI2_IOUNIT8_NUM_THRESHOLDS     (4)

typedef struct _MPI2_IOUNIT8_SENSOR {
	U16                     Flags;                /* 0x00 */
	U16                     Reserved1;            /* 0x02 */
	U16
		Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /* 0x04 */
	U32                     Reserved2;            /* 0x0C */
	U32                     Reserved3;            /* 0x10 */
	U32                     Reserved4;            /* 0x14 */
} MPI2_IOUNIT8_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT8_SENSOR,
Mpi2IOUnit8Sensor_t, MPI2_POINTER pMpi2IOUnit8Sensor_t;

/* defines for IO Unit Page 8 Sensor Flags field */
#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE         (0x0008)
#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE         (0x0004)
#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE         (0x0002)
#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE         (0x0001)

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumSensors at runtime.
 */
#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES
#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES     (1)
#endif

typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 {
	MPI2_CONFIG_PAGE_HEADER Header;               /* 0x00 */
	U32                     Reserved1;            /* 0x04 */
	U32                     Reserved2;            /* 0x08 */
	U8                      NumSensors;           /* 0x0C */
	U8                      PollingInterval;      /* 0x0D */
	U16                     Reserved3;            /* 0x0E */
	MPI2_IOUNIT8_SENSOR
			Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/* 0x10 */
} MPI2_CONFIG_PAGE_IO_UNIT_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_8,
Mpi2IOUnitPage8_t, MPI2_POINTER pMpi2IOUnitPage8_t;

#define MPI2_IOUNITPAGE8_PAGEVERSION                    (0x00)


/* IO Unit Page 9 */

typedef struct _MPI2_IOUNIT9_SENSOR {
	U16                     CurrentTemperature;     /* 0x00 */
	U16                     Reserved1;              /* 0x02 */
	U8                      Flags;                  /* 0x04 */
	U8                      Reserved2;              /* 0x05 */
	U16                     Reserved3;              /* 0x06 */
	U32                     Reserved4;              /* 0x08 */
	U32                     Reserved5;              /* 0x0C */
} MPI2_IOUNIT9_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT9_SENSOR,
Mpi2IOUnit9Sensor_t, MPI2_POINTER pMpi2IOUnit9Sensor_t;

/* defines for IO Unit Page 9 Sensor Flags field */
#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID        (0x01)

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumSensors at runtime.
 */
#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES
#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES     (1)
#endif

typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 {
	MPI2_CONFIG_PAGE_HEADER Header;                /* 0x00 */
	U32                     Reserved1;             /* 0x04 */
	U32                     Reserved2;             /* 0x08 */
	U8                      NumSensors;            /* 0x0C */
	U8                      Reserved4;             /* 0x0D */
	U16                     Reserved3;             /* 0x0E */
	MPI2_IOUNIT9_SENSOR
			Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/* 0x10 */
} MPI2_CONFIG_PAGE_IO_UNIT_9, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_9,
Mpi2IOUnitPage9_t, MPI2_POINTER pMpi2IOUnitPage9_t;

#define MPI2_IOUNITPAGE9_PAGEVERSION                    (0x00)


/* IO Unit Page 10 */

typedef struct _MPI2_IOUNIT10_FUNCTION {
	U8                      CreditPercent;      /* 0x00 */
	U8                      Reserved1;          /* 0x01 */
	U16                     Reserved2;          /* 0x02 */
} MPI2_IOUNIT10_FUNCTION, MPI2_POINTER PTR_MPI2_IOUNIT10_FUNCTION,
Mpi2IOUnit10Function_t, MPI2_POINTER pMpi2IOUnit10Function_t;

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumFunctions at runtime.
 */
#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES
#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES      (1)
#endif

typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
	MPI2_CONFIG_PAGE_HEADER Header;                    /* 0x00 */
	U8                      NumFunctions;             /* 0x04 */
	U8                      Reserved1;              /* 0x05 */
	U16                     Reserved2;              /* 0x06 */
	U32                     Reserved3;              /* 0x08 */
	U32                     Reserved4;		/* 0x0C */
	MPI2_IOUNIT10_FUNCTION
		Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/* 0x10 */
} MPI2_CONFIG_PAGE_IO_UNIT_10, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_10,
Mpi2IOUnitPage10_t, MPI2_POINTER pMpi2IOUnitPage10_t;

#define MPI2_IOUNITPAGE10_PAGEVERSION                   (0x01)



/****************************************************************************
*   IOC Config Pages
****************************************************************************/

/* IOC Page 0 */

typedef struct _MPI2_CONFIG_PAGE_IOC_0
{
    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
    U32                     Reserved1;                  /* 0x04 */
    U32                     Reserved2;                  /* 0x08 */
    U16                     VendorID;                   /* 0x0C */
    U16                     DeviceID;                   /* 0x0E */
    U8                      RevisionID;                 /* 0x10 */
    U8                      Reserved3;                  /* 0x11 */
    U16                     Reserved4;                  /* 0x12 */
    U32                     ClassCode;                  /* 0x14 */
    U16                     SubsystemVendorID;          /* 0x18 */
    U16                     SubsystemID;                /* 0x1A */
} MPI2_CONFIG_PAGE_IOC_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_0,
  Mpi2IOCPage0_t, MPI2_POINTER pMpi2IOCPage0_t;

#define MPI2_IOCPAGE0_PAGEVERSION                       (0x02)


/* IOC Page 1 */

typedef struct _MPI2_CONFIG_PAGE_IOC_1
{
    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
    U32                     Flags;                      /* 0x04 */
    U32                     CoalescingTimeout;          /* 0x08 */
    U8                      CoalescingDepth;            /* 0x0C */
    U8                      PCISlotNum;                 /* 0x0D */
    U8                      PCIBusNum;                  /* 0x0E */
    U8                      PCIDomainSegment;           /* 0x0F */
    U32                     Reserved1;                  /* 0x10 */
    U32                     Reserved2;                  /* 0x14 */
} MPI2_CONFIG_PAGE_IOC_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_1,
  Mpi2IOCPage1_t, MPI2_POINTER pMpi2IOCPage1_t;

#define MPI2_IOCPAGE1_PAGEVERSION                       (0x05)

/* defines for IOC Page 1 Flags field */
#define MPI2_IOCPAGE1_REPLY_COALESCING                  (0x00000001)

#define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN                (0xFF)
#define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN                 (0xFF)
#define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN                 (0xFF)

/* IOC Page 6 */

typedef struct _MPI2_CONFIG_PAGE_IOC_6
{
    MPI2_CONFIG_PAGE_HEADER Header;                         /* 0x00 */
    U32                     CapabilitiesFlags;              /* 0x04 */
    U8                      MaxDrivesRAID0;                 /* 0x08 */
    U8                      MaxDrivesRAID1;                 /* 0x09 */
    U8                      MaxDrivesRAID1E;                /* 0x0A */
    U8                      MaxDrivesRAID10;                /* 0x0B */
    U8                      MinDrivesRAID0;                 /* 0x0C */
    U8                      MinDrivesRAID1;                 /* 0x0D */
    U8                      MinDrivesRAID1E;                /* 0x0E */
    U8                      MinDrivesRAID10;                /* 0x0F */
    U32                     Reserved1;                      /* 0x10 */
    U8                      MaxGlobalHotSpares;             /* 0x14 */
    U8                      MaxPhysDisks;                   /* 0x15 */
    U8                      MaxVolumes;                     /* 0x16 */
    U8                      MaxConfigs;                     /* 0x17 */
    U8                      MaxOCEDisks;                    /* 0x18 */
    U8                      Reserved2;                      /* 0x19 */
    U16                     Reserved3;                      /* 0x1A */
    U32                     SupportedStripeSizeMapRAID0;    /* 0x1C */
    U32                     SupportedStripeSizeMapRAID1E;   /* 0x20 */
    U32                     SupportedStripeSizeMapRAID10;   /* 0x24 */
    U32                     Reserved4;                      /* 0x28 */
    U32                     Reserved5;                      /* 0x2C */
    U16                     DefaultMetadataSize;            /* 0x30 */
    U16                     Reserved6;                      /* 0x32 */
    U16                     MaxBadBlockTableEntries;        /* 0x34 */
    U16                     Reserved7;                      /* 0x36 */
    U32                     IRNvsramVersion;                /* 0x38 */
} MPI2_CONFIG_PAGE_IOC_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_6,
  Mpi2IOCPage6_t, MPI2_POINTER pMpi2IOCPage6_t;

#define MPI2_IOCPAGE6_PAGEVERSION                       (0x05)

/* defines for IOC Page 6 CapabilitiesFlags */
#define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT      (0x00000020)
#define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT          (0x00000010)
#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT           (0x00000008)
#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT          (0x00000004)
#define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT           (0x00000002)
#define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE        (0x00000001)


/* IOC Page 7 */

#define MPI2_IOCPAGE7_EVENTMASK_WORDS       (4)

typedef struct _MPI2_CONFIG_PAGE_IOC_7
{
    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
    U32                     Reserved1;                  /* 0x04 */
    U32                     EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */
    U16                     SASBroadcastPrimitiveMasks; /* 0x18 */
	U16                     SASNotifyPrimitiveMasks;    /* 0x1A */
    U32                     Reserved3;                  /* 0x1C */
} MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7,
  Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t;

#define MPI2_IOCPAGE7_PAGEVERSION                       (0x02)


/* IOC Page 8 */

typedef struct _MPI2_CONFIG_PAGE_IOC_8
{
    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
    U8                      NumDevsPerEnclosure;        /* 0x04 */
    U8                      Reserved1;                  /* 0x05 */
    U16                     Reserved2;                  /* 0x06 */
    U16                     MaxPersistentEntries;       /* 0x08 */
    U16                     MaxNumPhysicalMappedIDs;    /* 0x0A */
    U16                     Flags;                      /* 0x0C */
    U16                     Reserved3;                  /* 0x0E */
    U16                     IRVolumeMappingFlags;       /* 0x10 */
    U16                     Reserved4;                  /* 0x12 */
    U32                     Reserved5;                  /* 0x14 */
} MPI2_CONFIG_PAGE_IOC_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_8,
  Mpi2IOCPage8_t, MPI2_POINTER pMpi2IOCPage8_t;

#define MPI2_IOCPAGE8_PAGEVERSION                       (0x00)

/* defines for IOC Page 8 Flags field */
#define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1             (0x00000020)
#define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0         (0x00000010)

#define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE           (0x0000000E)
#define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING  (0x00000000)
#define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING      (0x00000002)

#define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING  (0x00000001)
#define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING   (0x00000000)

/* defines for IOC Page 8 IRVolumeMappingFlags */
#define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE  (0x00000003)
#define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING        (0x00000000)
#define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING       (0x00000001)


/****************************************************************************
*   BIOS Config Pages
****************************************************************************/

/* BIOS Page 1 */

typedef struct _MPI2_CONFIG_PAGE_BIOS_1
{
	MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
	U32                     BiosOptions;                /* 0x04 */
	U32                     IOCSettings;                /* 0x08 */
	U8			SSUTimeout;		    /* 0x0C */
	U8			Reserved1;		    /* 0x0D */
	U16			Reserved2;		    /* 0x0E */
	U32                     DeviceSettings;             /* 0x10 */
	U16                     NumberOfDevices;            /* 0x14 */
	U16                     UEFIVersion;                /* 0x16 */
	U16                     IOTimeoutBlockDevicesNonRM; /* 0x18 */
	U16                     IOTimeoutSequential;        /* 0x1A */
	U16                     IOTimeoutOther;             /* 0x1C */
	U16                     IOTimeoutBlockDevicesRM;    /* 0x1E */
} MPI2_CONFIG_PAGE_BIOS_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_1,
  Mpi2BiosPage1_t, MPI2_POINTER pMpi2BiosPage1_t;

#define MPI2_BIOSPAGE1_PAGEVERSION                      (0x07)

/* values for BIOS Page 1 BiosOptions field */
#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK			(0x00003800)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL			(0x00000000)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE			(0x00000800)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID			(0x00001000)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_PSENS			(0x00001800)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_ESPHY			(0x00002000)

#define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS                 (0x00000400)

#define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD       (0x00000300)
#define MPI2_BIOSPAGE1_OPTIONS_USE_BIT0_REGISTRATION_UEFI_BSD   (0x00000000)
#define MPI2_BIOSPAGE1_OPTIONS_FULL_REGISTRATION_UEFI_BSD       (0x00000100)
#define MPI2_BIOSPAGE1_OPTIONS_ADAPTER_REGISTRATION_UEFI_BSD    (0x00000200)
#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_REGISTRATION_UEFI_BSD    (0x00000300)

#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID                  (0x000000F0)
#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID                   (0x00000000)

#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION   (0x00000006)
#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII              (0x00000000)
#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII             (0x00000002)
#define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII       (0x00000004)

#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS                 (0x00000001)

/* values for BIOS Page 1 IOCSettings field */
#define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE      (0x00030000)
#define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT       (0x00000000)
#define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT          (0x00010000)

#define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING           (0x000000C0)
#define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING           (0x00000000)
#define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING           (0x00000040)
#define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING          (0x00000080)

#define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT      (0x00000030)
#define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT                (0x00000000)
#define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT              (0x00000010)
#define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT                (0x00000020)
#define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT               (0x00000030)

#define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS             (0x00000008)

/* values for BIOS Page 1 DeviceSettings field */
#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING     (0x00000010)
#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN           (0x00000008)
#define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN            (0x00000004)
#define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN        (0x00000002)
#define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN         (0x00000001)

/* defines for BIOS Page 1 UEFIVersion field */
#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK              (0xFF00)
#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT             (8)
#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK              (0x00FF)
#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT             (0)



/* BIOS Page 2 */

typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER
{
    U32         Reserved1;                              /* 0x00 */
    U32         Reserved2;                              /* 0x04 */
    U32         Reserved3;                              /* 0x08 */
    U32         Reserved4;                              /* 0x0C */
    U32         Reserved5;                              /* 0x10 */
    U32         Reserved6;                              /* 0x14 */
} MPI2_BOOT_DEVICE_ADAPTER_ORDER,
  MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER,
  Mpi2BootDeviceAdapterOrder_t, MPI2_POINTER pMpi2BootDeviceAdapterOrder_t;

typedef struct _MPI2_BOOT_DEVICE_SAS_WWID
{
    U64         SASAddress;                             /* 0x00 */
    U8          LUN[8];                                 /* 0x08 */
    U32         Reserved1;                              /* 0x10 */
    U32         Reserved2;                              /* 0x14 */
} MPI2_BOOT_DEVICE_SAS_WWID, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_SAS_WWID,
  Mpi2BootDeviceSasWwid_t, MPI2_POINTER pMpi2BootDeviceSasWwid_t;

typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT
{
    U64         EnclosureLogicalID;                     /* 0x00 */
    U32         Reserved1;                              /* 0x08 */
    U32         Reserved2;                              /* 0x0C */
    U16         SlotNumber;                             /* 0x10 */
    U16         Reserved3;                              /* 0x12 */
    U32         Reserved4;                              /* 0x14 */
} MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
  MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
  Mpi2BootDeviceEnclosureSlot_t, MPI2_POINTER pMpi2BootDeviceEnclosureSlot_t;

typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME
{
    U64         DeviceName;                             /* 0x00 */
    U8          LUN[8];                                 /* 0x08 */
    U32         Reserved1;                              /* 0x10 */
    U32         Reserved2;                              /* 0x14 */
} MPI2_BOOT_DEVICE_DEVICE_NAME, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_DEVICE_NAME,
  Mpi2BootDeviceDeviceName_t, MPI2_POINTER pMpi2BootDeviceDeviceName_t;

typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE
{
    MPI2_BOOT_DEVICE_ADAPTER_ORDER  AdapterOrder;
    MPI2_BOOT_DEVICE_SAS_WWID       SasWwid;
    MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot;
    MPI2_BOOT_DEVICE_DEVICE_NAME    DeviceName;
} MPI2_BIOSPAGE2_BOOT_DEVICE, MPI2_POINTER PTR_MPI2_BIOSPAGE2_BOOT_DEVICE,
  Mpi2BiosPage2BootDevice_t, MPI2_POINTER pMpi2BiosPage2BootDevice_t;

typedef struct _MPI2_CONFIG_PAGE_BIOS_2
{
    MPI2_CONFIG_PAGE_HEADER     Header;                 /* 0x00 */
    U32                         Reserved1;              /* 0x04 */
    U32                         Reserved2;              /* 0x08 */
    U32                         Reserved3;              /* 0x0C */
    U32                         Reserved4;              /* 0x10 */
    U32                         Reserved5;              /* 0x14 */
    U32                         Reserved6;              /* 0x18 */
    U8                          ReqBootDeviceForm;      /* 0x1C */
    U8                          Reserved7;              /* 0x1D */
    U16                         Reserved8;              /* 0x1E */
    MPI2_BIOSPAGE2_BOOT_DEVICE  RequestedBootDevice;    /* 0x20 */
    U8                          ReqAltBootDeviceForm;   /* 0x38 */
    U8                          Reserved9;              /* 0x39 */
    U16                         Reserved10;             /* 0x3A */
    MPI2_BIOSPAGE2_BOOT_DEVICE  RequestedAltBootDevice; /* 0x3C */
    U8                          CurrentBootDeviceForm;  /* 0x58 */
    U8                          Reserved11;             /* 0x59 */
    U16                         Reserved12;             /* 0x5A */
    MPI2_BIOSPAGE2_BOOT_DEVICE  CurrentBootDevice;      /* 0x58 */
} MPI2_CONFIG_PAGE_BIOS_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_2,
  Mpi2BiosPage2_t, MPI2_POINTER pMpi2BiosPage2_t;

#define MPI2_BIOSPAGE2_PAGEVERSION                      (0x04)

/* values for BIOS Page 2 BootDeviceForm fields */
#define MPI2_BIOSPAGE2_FORM_MASK                        (0x0F)
#define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED         (0x00)
#define MPI2_BIOSPAGE2_FORM_SAS_WWID                    (0x05)
#define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT              (0x06)
#define MPI2_BIOSPAGE2_FORM_DEVICE_NAME                 (0x07)


/* BIOS Page 3 */

typedef struct _MPI2_ADAPTER_INFO
{
    U8      PciBusNumber;                               /* 0x00 */
    U8      PciDeviceAndFunctionNumber;                 /* 0x01 */
    U16     AdapterFlags;                               /* 0x02 */
} MPI2_ADAPTER_INFO, MPI2_POINTER PTR_MPI2_ADAPTER_INFO,
  Mpi2AdapterInfo_t, MPI2_POINTER pMpi2AdapterInfo_t;

#define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED                (0x0001)
#define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS             (0x0002)

typedef struct _MPI2_CONFIG_PAGE_BIOS_3
{
    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
    U32                     GlobalFlags;                /* 0x04 */
    U32                     BiosVersion;                /* 0x08 */
    MPI2_ADAPTER_INFO       AdapterOrder[4];            /* 0x0C */
    U32                     Reserved1;                  /* 0x1C */
} MPI2_CONFIG_PAGE_BIOS_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_3,
  Mpi2BiosPage3_t, MPI2_POINTER pMpi2BiosPage3_t;

#define MPI2_BIOSPAGE3_PAGEVERSION                      (0x00)

/* values for BIOS Page 3 GlobalFlags */
#define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR             (0x00000002)
#define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE             (0x00000004)
#define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE        (0x00000010)

#define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK      (0x000000E0)
#define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY      (0x00000000)
#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY            (0x00000020)
#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY        (0x00000040)


/* BIOS Page 4 */

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumPhys at runtime.
 */
#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES
#define MPI2_BIOS_PAGE_4_PHY_ENTRIES        (1)
#endif

typedef struct _MPI2_BIOS4_ENTRY
{
    U64                     ReassignmentWWID;       /* 0x00 */
    U64                     ReassignmentDeviceName; /* 0x08 */
} MPI2_BIOS4_ENTRY, MPI2_POINTER PTR_MPI2_BIOS4_ENTRY,
  Mpi2MBios4Entry_t, MPI2_POINTER pMpi2Bios4Entry_t;

typedef struct _MPI2_CONFIG_PAGE_BIOS_4
{
    MPI2_CONFIG_PAGE_HEADER Header;                             /* 0x00 */
    U8                      NumPhys;                            /* 0x04 */
    U8                      Reserved1;                          /* 0x05 */
    U16                     Reserved2;                          /* 0x06 */
    MPI2_BIOS4_ENTRY        Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES];  /* 0x08 */
} MPI2_CONFIG_PAGE_BIOS_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_4,
  Mpi2BiosPage4_t, MPI2_POINTER pMpi2BiosPage4_t;

#define MPI2_BIOSPAGE4_PAGEVERSION                      (0x01)


/****************************************************************************
*   RAID Volume Config Pages
****************************************************************************/

/* RAID Volume Page 0 */

typedef struct _MPI2_RAIDVOL0_PHYS_DISK
{
    U8                      RAIDSetNum;                 /* 0x00 */
    U8                      PhysDiskMap;                /* 0x01 */
    U8                      PhysDiskNum;                /* 0x02 */
    U8                      Reserved;                   /* 0x03 */
} MPI2_RAIDVOL0_PHYS_DISK, MPI2_POINTER PTR_MPI2_RAIDVOL0_PHYS_DISK,
  Mpi2RaidVol0PhysDisk_t, MPI2_POINTER pMpi2RaidVol0PhysDisk_t;

/* defines for the PhysDiskMap field */
#define MPI2_RAIDVOL0_PHYSDISK_PRIMARY                  (0x01)
#define MPI2_RAIDVOL0_PHYSDISK_SECONDARY                (0x02)

typedef struct _MPI2_RAIDVOL0_SETTINGS
{
    U16                     Settings;                   /* 0x00 */
    U8                      HotSparePool;               /* 0x01 */
    U8                      Reserved;                   /* 0x02 */
} MPI2_RAIDVOL0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDVOL0_SETTINGS,
  Mpi2RaidVol0Settings_t, MPI2_POINTER pMpi2RaidVol0Settings_t;

/* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */
#define MPI2_RAID_HOT_SPARE_POOL_0                      (0x01)
#define MPI2_RAID_HOT_SPARE_POOL_1                      (0x02)
#define MPI2_RAID_HOT_SPARE_POOL_2                      (0x04)
#define MPI2_RAID_HOT_SPARE_POOL_3                      (0x08)
#define MPI2_RAID_HOT_SPARE_POOL_4                      (0x10)
#define MPI2_RAID_HOT_SPARE_POOL_5                      (0x20)
#define MPI2_RAID_HOT_SPARE_POOL_6                      (0x40)
#define MPI2_RAID_HOT_SPARE_POOL_7                      (0x80)

/* RAID Volume Page 0 VolumeSettings defines */
#define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX     (0x0008)
#define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004)

#define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING        (0x0003)
#define MPI2_RAIDVOL0_SETTING_UNCHANGED                 (0x0000)
#define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING     (0x0001)
#define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING      (0x0002)

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumPhysDisks at runtime.
 */
#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX
#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX       (1)
#endif

typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0
{
    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
    U16                     DevHandle;                  /* 0x04 */
    U8                      VolumeState;                /* 0x06 */
    U8                      VolumeType;                 /* 0x07 */
    U32                     VolumeStatusFlags;          /* 0x08 */
    MPI2_RAIDVOL0_SETTINGS  VolumeSettings;             /* 0x0C */
    U64                     MaxLBA;                     /* 0x10 */
    U32                     StripeSize;                 /* 0x18 */
    U16                     BlockSize;                  /* 0x1C */
    U16                     Reserved1;                  /* 0x1E */
    U8                      SupportedPhysDisks;         /* 0x20 */
    U8                      ResyncRate;                 /* 0x21 */
    U16                     DataScrubDuration;          /* 0x22 */
    U8                      NumPhysDisks;               /* 0x24 */
    U8                      Reserved2;                  /* 0x25 */
    U8                      Reserved3;                  /* 0x26 */
    U8                      InactiveStatus;             /* 0x27 */
    MPI2_RAIDVOL0_PHYS_DISK PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /* 0x28 */
} MPI2_CONFIG_PAGE_RAID_VOL_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_0,
  Mpi2RaidVolPage0_t, MPI2_POINTER pMpi2RaidVolPage0_t;

#define MPI2_RAIDVOLPAGE0_PAGEVERSION           (0x0A)

/* values for RAID VolumeState */
#define MPI2_RAID_VOL_STATE_MISSING                         (0x00)
#define MPI2_RAID_VOL_STATE_FAILED                          (0x01)
#define MPI2_RAID_VOL_STATE_INITIALIZING                    (0x02)
#define MPI2_RAID_VOL_STATE_ONLINE                          (0x03)
#define MPI2_RAID_VOL_STATE_DEGRADED                        (0x04)
#define MPI2_RAID_VOL_STATE_OPTIMAL                         (0x05)

/* values for RAID VolumeType */
#define MPI2_RAID_VOL_TYPE_RAID0                            (0x00)
#define MPI2_RAID_VOL_TYPE_RAID1E                           (0x01)
#define MPI2_RAID_VOL_TYPE_RAID1                            (0x02)
#define MPI2_RAID_VOL_TYPE_RAID10                           (0x05)
#define MPI2_RAID_VOL_TYPE_UNKNOWN                          (0xFF)

/* values for RAID Volume Page 0 VolumeStatusFlags field */
#define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC            (0x02000000)
#define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING        (0x01000000)
#define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING               (0x00800000)
#define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING      (0x00400000)
#define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT      (0x00200000)
#define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB                (0x00100000)
#define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK         (0x00080000)
#define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION        (0x00040000)
#define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT           (0x00020000)
#define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS        (0x00010000)
#define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT        (0x00000080)
#define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED               (0x00000040)
#define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE              (0x00000020)
#define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR          (0x00000000)
#define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR        (0x00000010)
#define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL      (0x00000008)
#define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE           (0x00000004)
#define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED                  (0x00000002)
#define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED                   (0x00000001)

/* values for RAID Volume Page 0 SupportedPhysDisks field */
#define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS             (0x08)
#define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS                    (0x04)
#define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL                  (0x02)
#define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL                 (0x01)

/* values for RAID Volume Page 0 InactiveStatus field */
#define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE                  (0x00)
#define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE           (0x01)
#define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE           (0x02)
#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE    (0x03)
#define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE             (0x04)
#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE    (0x05)
#define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED                (0x06)


/* RAID Volume Page 1 */

typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1
{
    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
    U16                     DevHandle;                  /* 0x04 */
    U16                     Reserved0;                  /* 0x06 */
    U8                      GUID[24];                   /* 0x08 */
    U8                      Name[16];                   /* 0x20 */
    U64                     WWID;                       /* 0x30 */
    U32                     Reserved1;                  /* 0x38 */
    U32                     Reserved2;                  /* 0x3C */
} MPI2_CONFIG_PAGE_RAID_VOL_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_1,
  Mpi2RaidVolPage1_t, MPI2_POINTER pMpi2RaidVolPage1_t;

#define MPI2_RAIDVOLPAGE1_PAGEVERSION           (0x03)


/****************************************************************************
*   RAID Physical Disk Config Pages
****************************************************************************/

/* RAID Physical Disk Page 0 */

typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS
{
    U16                     Reserved1;                  /* 0x00 */
    U8                      HotSparePool;               /* 0x02 */
    U8                      Reserved2;                  /* 0x03 */
} MPI2_RAIDPHYSDISK0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_SETTINGS,
  Mpi2RaidPhysDisk0Settings_t, MPI2_POINTER pMpi2RaidPhysDisk0Settings_t;

/* use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */

typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA
{
    U8                      VendorID[8];                /* 0x00 */
    U8                      ProductID[16];              /* 0x08 */
    U8                      ProductRevLevel[4];         /* 0x18 */
    U8                      SerialNum[32];              /* 0x1C */
} MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
  MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
  Mpi2RaidPhysDisk0InquiryData_t, MPI2_POINTER pMpi2RaidPhysDisk0InquiryData_t;

typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0
{
    MPI2_CONFIG_PAGE_HEADER         Header;                     /* 0x00 */
    U16                             DevHandle;                  /* 0x04 */
    U8                              Reserved1;                  /* 0x06 */
    U8                              PhysDiskNum;                /* 0x07 */
    MPI2_RAIDPHYSDISK0_SETTINGS     PhysDiskSettings;           /* 0x08 */
    U32                             Reserved2;                  /* 0x0C */
    MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData;                /* 0x10 */
    U32                             Reserved3;                  /* 0x4C */
    U8                              PhysDiskState;              /* 0x50 */
    U8                              OfflineReason;              /* 0x51 */
    U8                              IncompatibleReason;         /* 0x52 */
    U8                              PhysDiskAttributes;         /* 0x53 */
    U32                             PhysDiskStatusFlags;        /* 0x54 */
    U64                             DeviceMaxLBA;               /* 0x58 */
    U64                             HostMaxLBA;                 /* 0x60 */
    U64                             CoercedMaxLBA;              /* 0x68 */
    U16                             BlockSize;                  /* 0x70 */
    U16                             Reserved5;                  /* 0x72 */
    U32                             Reserved6;                  /* 0x74 */
} MPI2_CONFIG_PAGE_RD_PDISK_0,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_0,
  Mpi2RaidPhysDiskPage0_t, MPI2_POINTER pMpi2RaidPhysDiskPage0_t;

#define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION          (0x05)

/* PhysDiskState defines */
#define MPI2_RAID_PD_STATE_NOT_CONFIGURED               (0x00)
#define MPI2_RAID_PD_STATE_NOT_COMPATIBLE               (0x01)
#define MPI2_RAID_PD_STATE_OFFLINE                      (0x02)
#define MPI2_RAID_PD_STATE_ONLINE                       (0x03)
#define MPI2_RAID_PD_STATE_HOT_SPARE                    (0x04)
#define MPI2_RAID_PD_STATE_DEGRADED                     (0x05)
#define MPI2_RAID_PD_STATE_REBUILDING                   (0x06)
#define MPI2_RAID_PD_STATE_OPTIMAL                      (0x07)

/* OfflineReason defines */
#define MPI2_PHYSDISK0_ONLINE                           (0x00)
#define MPI2_PHYSDISK0_OFFLINE_MISSING                  (0x01)
#define MPI2_PHYSDISK0_OFFLINE_FAILED                   (0x03)
#define MPI2_PHYSDISK0_OFFLINE_INITIALIZING             (0x04)
#define MPI2_PHYSDISK0_OFFLINE_REQUESTED                (0x05)
#define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED         (0x06)
#define MPI2_PHYSDISK0_OFFLINE_OTHER                    (0xFF)

/* IncompatibleReason defines */
#define MPI2_PHYSDISK0_COMPATIBLE                       (0x00)
#define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL            (0x01)
#define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE           (0x02)
#define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA             (0x03)
#define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD   (0x04)
#define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA    (0x05)
#define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE          (0x06)
#define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN             (0xFF)

/* PhysDiskAttributes defines */
#define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK                (0x0C)
#define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE         (0x08)
#define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE           (0x04)

#define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK             (0x03)
#define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL              (0x02)
#define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL             (0x01)

/* PhysDiskStatusFlags defines */
#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED        (0x00000040)
#define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET           (0x00000020)
#define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED  (0x00000010)
#define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS     (0x00000000)
#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008)
#define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME      (0x00000004)
#define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED             (0x00000002)
#define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC          (0x00000001)


/* RAID Physical Disk Page 1 */

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumPhysDiskPaths at runtime.
 */
#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX
#define MPI2_RAID_PHYS_DISK1_PATH_MAX   (1)
#endif

typedef struct _MPI2_RAIDPHYSDISK1_PATH
{
    U16             DevHandle;          /* 0x00 */
    U16             Reserved1;          /* 0x02 */
    U64             WWID;               /* 0x04 */
    U64             OwnerWWID;          /* 0x0C */
    U8              OwnerIdentifier;    /* 0x14 */
    U8              Reserved2;          /* 0x15 */
    U16             Flags;              /* 0x16 */
} MPI2_RAIDPHYSDISK1_PATH, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK1_PATH,
  Mpi2RaidPhysDisk1Path_t, MPI2_POINTER pMpi2RaidPhysDisk1Path_t;

/* RAID Physical Disk Page 1 Physical Disk Path Flags field defines */
#define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY        (0x0004)
#define MPI2_RAID_PHYSDISK1_FLAG_BROKEN         (0x0002)
#define MPI2_RAID_PHYSDISK1_FLAG_INVALID        (0x0001)

typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1
{
    MPI2_CONFIG_PAGE_HEADER         Header;                     /* 0x00 */
    U8                              NumPhysDiskPaths;           /* 0x04 */
    U8                              PhysDiskNum;                /* 0x05 */
    U16                             Reserved1;                  /* 0x06 */
    U32                             Reserved2;                  /* 0x08 */
    MPI2_RAIDPHYSDISK1_PATH         PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/* 0x0C */
} MPI2_CONFIG_PAGE_RD_PDISK_1,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_1,
  Mpi2RaidPhysDiskPage1_t, MPI2_POINTER pMpi2RaidPhysDiskPage1_t;

#define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION          (0x02)


/****************************************************************************
*   values for fields used by several types of SAS Config Pages
****************************************************************************/

/* values for NegotiatedLinkRates fields */
#define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL             (0xF0)
#define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL            (4)
#define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL            (0x0F)
/* link rates used for Negotiated Physical and Logical Link Rate */
#define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE        (0x00)
#define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED             (0x01)
#define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED       (0x02)
#define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE        (0x03)
#define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR            (0x04)
#define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS    (0x05)
#define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY          (0x06)
#define MPI2_SAS_NEG_LINK_RATE_1_5                      (0x08)
#define MPI2_SAS_NEG_LINK_RATE_3_0                      (0x09)
#define MPI2_SAS_NEG_LINK_RATE_6_0                      (0x0A)


/* values for AttachedPhyInfo fields */
#define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT       (0x00000040)
#define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS        (0x00000020)
#define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE           (0x00000010)

#define MPI2_SAS_APHYINFO_REASON_MASK                   (0x0000000F)
#define MPI2_SAS_APHYINFO_REASON_UNKNOWN                (0x00000000)
#define MPI2_SAS_APHYINFO_REASON_POWER_ON               (0x00000001)
#define MPI2_SAS_APHYINFO_REASON_HARD_RESET             (0x00000002)
#define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL        (0x00000003)
#define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC           (0x00000004)
#define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ       (0x00000005)
#define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER    (0x00000006)
#define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT          (0x00000007)
#define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED       (0x00000008)


/* values for PhyInfo fields */
#define MPI2_SAS_PHYINFO_PHY_VACANT                     (0x80000000)

#define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK       (0x18000000)
#define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION      (27)
#define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE               (0x00000000)
#define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL              (0x08000000)
#define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER              (0x10000000)

#define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS       (0x04000000)
#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT        (0x02000000)
#define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS               (0x01000000)
#define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT          (0x00400000)
#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS                   (0x00200000)
#define MPI2_SAS_PHYINFO_ZONING_ENABLED                 (0x00100000)

#define MPI2_SAS_PHYINFO_REASON_MASK                    (0x000F0000)
#define MPI2_SAS_PHYINFO_REASON_UNKNOWN                 (0x00000000)
#define MPI2_SAS_PHYINFO_REASON_POWER_ON                (0x00010000)
#define MPI2_SAS_PHYINFO_REASON_HARD_RESET              (0x00020000)
#define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL         (0x00030000)
#define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC            (0x00040000)
#define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ        (0x00050000)
#define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER     (0x00060000)
#define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT           (0x00070000)
#define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED        (0x00080000)

#define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED         (0x00008000)
#define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE               (0x00004000)
#define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT     (0x00002000)
#define MPI2_SAS_PHYINFO_VIRTUAL_PHY                    (0x00001000)

#define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME      (0x00000F00)
#define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME     (8)

#define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE         (0x000000F0)
#define MPI2_SAS_PHYINFO_DIRECT_ROUTING                 (0x00000000)
#define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING            (0x00000010)
#define MPI2_SAS_PHYINFO_TABLE_ROUTING                  (0x00000020)


/* values for SAS ProgrammedLinkRate fields */
#define MPI2_SAS_PRATE_MAX_RATE_MASK                    (0xF0)
#define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE        (0x00)
#define MPI2_SAS_PRATE_MAX_RATE_1_5                     (0x80)
#define MPI2_SAS_PRATE_MAX_RATE_3_0                     (0x90)
#define MPI2_SAS_PRATE_MAX_RATE_6_0                     (0xA0)
#define MPI25_SAS_PRATE_MAX_RATE_12_0                   (0xB0)
#define MPI2_SAS_PRATE_MIN_RATE_MASK                    (0x0F)
#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE        (0x00)
#define MPI2_SAS_PRATE_MIN_RATE_1_5                     (0x08)
#define MPI2_SAS_PRATE_MIN_RATE_3_0                     (0x09)
#define MPI2_SAS_PRATE_MIN_RATE_6_0                     (0x0A)


/* values for SAS HwLinkRate fields */
#define MPI2_SAS_HWRATE_MAX_RATE_MASK                   (0xF0)
#define MPI2_SAS_HWRATE_MAX_RATE_1_5                    (0x80)
#define MPI2_SAS_HWRATE_MAX_RATE_3_0                    (0x90)
#define MPI2_SAS_HWRATE_MAX_RATE_6_0                    (0xA0)
#define MPI25_SAS_HWRATE_MAX_RATE_12_0                  (0xB0)
#define MPI2_SAS_HWRATE_MIN_RATE_MASK                   (0x0F)
#define MPI2_SAS_HWRATE_MIN_RATE_1_5                    (0x08)
#define MPI2_SAS_HWRATE_MIN_RATE_3_0                    (0x09)
#define MPI2_SAS_HWRATE_MIN_RATE_6_0                    (0x0A)



/****************************************************************************
*   SAS IO Unit Config Pages
****************************************************************************/

/* SAS IO Unit Page 0 */

typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA
{
    U8          Port;                   /* 0x00 */
    U8          PortFlags;              /* 0x01 */
    U8          PhyFlags;               /* 0x02 */
    U8          NegotiatedLinkRate;     /* 0x03 */
    U32         ControllerPhyDeviceInfo;/* 0x04 */
    U16         AttachedDevHandle;      /* 0x08 */
    U16         ControllerDevHandle;    /* 0x0A */
    U32         DiscoveryStatus;        /* 0x0C */
    U32         Reserved;               /* 0x10 */
} MPI2_SAS_IO_UNIT0_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT0_PHY_DATA,
  Mpi2SasIOUnit0PhyData_t, MPI2_POINTER pMpi2SasIOUnit0PhyData_t;

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumPhys at runtime.
 */
#ifndef MPI2_SAS_IOUNIT0_PHY_MAX
#define MPI2_SAS_IOUNIT0_PHY_MAX        (1)
#endif

typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0
{
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                             /* 0x00 */
    U32                                 Reserved1;                          /* 0x08 */
    U8                                  NumPhys;                            /* 0x0C */
    U8                                  Reserved2;                          /* 0x0D */
    U16                                 Reserved3;                          /* 0x0E */
    MPI2_SAS_IO_UNIT0_PHY_DATA          PhyData[MPI2_SAS_IOUNIT0_PHY_MAX];  /* 0x10 */
} MPI2_CONFIG_PAGE_SASIOUNIT_0,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0,
  Mpi2SasIOUnitPage0_t, MPI2_POINTER pMpi2SasIOUnitPage0_t;

#define MPI2_SASIOUNITPAGE0_PAGEVERSION                     (0x05)

/* values for SAS IO Unit Page 0 PortFlags */
#define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS     (0x08)
#define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG          (0x01)

/* values for SAS IO Unit Page 0 PhyFlags */
#define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED             (0x10)
#define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED               (0x08)

/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */

/* see mpi2_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */

/* values for SAS IO Unit Page 0 DiscoveryStatus */
#define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED            (0x80000000)
#define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED             (0x40000000)
#define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED               (0x20000000)
#define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED             (0x10000000)
#define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR             (0x08000000)
#define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE    (0x00008000)
#define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE            (0x00004000)
#define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN                (0x00002000)
#define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK        (0x00001000)
#define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE               (0x00000800)
#define MPI2_SASIOUNIT0_DS_TABLE_LINK                       (0x00000400)
#define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK                 (0x00000200)
#define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR                    (0x00000100)
#define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED              (0x00000080)
#define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST                  (0x00000040)
#define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES                (0x00000020)
#define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT                      (0x00000010)
#define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS                   (0x00000004)
#define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE             (0x00000002)
#define MPI2_SASIOUNIT0_DS_LOOP_DETECTED                    (0x00000001)


/* SAS IO Unit Page 1 */

typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA
{
    U8          Port;                       /* 0x00 */
    U8          PortFlags;                  /* 0x01 */
    U8          PhyFlags;                   /* 0x02 */
    U8          MaxMinLinkRate;             /* 0x03 */
    U32         ControllerPhyDeviceInfo;    /* 0x04 */
    U16         MaxTargetPortConnectTime;   /* 0x08 */
    U16         Reserved1;                  /* 0x0A */
} MPI2_SAS_IO_UNIT1_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT1_PHY_DATA,
  Mpi2SasIOUnit1PhyData_t, MPI2_POINTER pMpi2SasIOUnit1PhyData_t;

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumPhys at runtime.
 */
#ifndef MPI2_SAS_IOUNIT1_PHY_MAX
#define MPI2_SAS_IOUNIT1_PHY_MAX        (1)
#endif

typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1
{
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                             /* 0x00 */
    U16                                 ControlFlags;                       /* 0x08 */
    U16                                 SASNarrowMaxQueueDepth;             /* 0x0A */
    U16                                 AdditionalControlFlags;             /* 0x0C */
    U16                                 SASWideMaxQueueDepth;               /* 0x0E */
    U8                                  NumPhys;                            /* 0x10 */
    U8                                  SATAMaxQDepth;                      /* 0x11 */
    U8                                  ReportDeviceMissingDelay;           /* 0x12 */
    U8                                  IODeviceMissingDelay;               /* 0x13 */
    MPI2_SAS_IO_UNIT1_PHY_DATA          PhyData[MPI2_SAS_IOUNIT1_PHY_MAX];  /* 0x14 */
} MPI2_CONFIG_PAGE_SASIOUNIT_1,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1,
  Mpi2SasIOUnitPage1_t, MPI2_POINTER pMpi2SasIOUnitPage1_t;

#define MPI2_SASIOUNITPAGE1_PAGEVERSION     (0x09)

/* values for SAS IO Unit Page 1 ControlFlags */
#define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST                    (0x8000)
#define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX                        (0x4000)
#define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX                        (0x2000)
#define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE                    (0x1000)

#define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT                    (0x0600)
#define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT                   (9)
#define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH                    (0x0)
#define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT                     (0x1)
#define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT                    (0x2)

#define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED             (0x0080)
#define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED                 (0x0040)
#define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED                   (0x0020)
#define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED                   (0x0010)
#define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL           (0x0008)
#define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL                 (0x0004)
#define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY                 (0x0002)
#define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION                   (0x0001)

/* values for SAS IO Unit Page 1 AdditionalControlFlags */
#define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL          (0x0080)
#define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION    (0x0040)
#define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION        (0x0020)
#define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET   (0x0010)
#define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET  (0x0008)
#define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET   (0x0004)
#define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET     (0x0002)
#define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE               (0x0001)

/* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
#define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK                 (0x7F)
#define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16                      (0x80)

/* values for SAS IO Unit Page 1 PortFlags */
#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG                 (0x01)

/* values for SAS IO Unit Page 1 PhyFlags */
#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE                      (0x10)
#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE                        (0x08)

/* values for SAS IO Unit Page 1 MaxMinLinkRate */
#define MPI2_SASIOUNIT1_MAX_RATE_MASK                               (0xF0)
#define MPI2_SASIOUNIT1_MAX_RATE_1_5                                (0x80)
#define MPI2_SASIOUNIT1_MAX_RATE_3_0                                (0x90)
#define MPI2_SASIOUNIT1_MAX_RATE_6_0                                (0xA0)
#define MPI2_SASIOUNIT1_MIN_RATE_MASK                               (0x0F)
#define MPI2_SASIOUNIT1_MIN_RATE_1_5                                (0x08)
#define MPI2_SASIOUNIT1_MIN_RATE_3_0                                (0x09)
#define MPI2_SASIOUNIT1_MIN_RATE_6_0                                (0x0A)

/* see mpi2_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */


/* SAS IO Unit Page 4 */

typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP
{
    U8          MaxTargetSpinup;            /* 0x00 */
    U8          SpinupDelay;                /* 0x01 */
	U8          SpinupFlags;                /* 0x02 */
	U8          Reserved1;                  /* 0x03 */
} MPI2_SAS_IOUNIT4_SPINUP_GROUP, MPI2_POINTER PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP,
  Mpi2SasIOUnit4SpinupGroup_t, MPI2_POINTER pMpi2SasIOUnit4SpinupGroup_t;

/* defines for SAS IO Unit Page 4 SpinupFlags */
#define MPI2_SASIOUNIT4_SPINUP_DISABLE_FLAG         (0x01)

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumPhys at runtime.
 */
#ifndef MPI2_SAS_IOUNIT4_PHY_MAX
#define MPI2_SAS_IOUNIT4_PHY_MAX        (4)
#endif

typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4
{
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                         /* 0x00 */
    MPI2_SAS_IOUNIT4_SPINUP_GROUP       SpinupGroupParameters[4];       /* 0x08 */
    U32                                 Reserved1;                      /* 0x18 */
    U32                                 Reserved2;                      /* 0x1C */
    U32                                 Reserved3;                      /* 0x20 */
    U8                                  BootDeviceWaitTime;             /* 0x24 */
    U8                                  Reserved4;                      /* 0x25 */
    U16                                 Reserved5;                      /* 0x26 */
    U8                                  NumPhys;                        /* 0x28 */
    U8                                  PEInitialSpinupDelay;           /* 0x29 */
    U8                                  PEReplyDelay;                   /* 0x2A */
    U8                                  Flags;                          /* 0x2B */
    U8                                  PHY[MPI2_SAS_IOUNIT4_PHY_MAX];  /* 0x2C */
} MPI2_CONFIG_PAGE_SASIOUNIT_4,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4,
  Mpi2SasIOUnitPage4_t, MPI2_POINTER pMpi2SasIOUnitPage4_t;

#define MPI2_SASIOUNITPAGE4_PAGEVERSION     (0x02)

/* defines for Flags field */
#define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE               (0x01)

/* defines for PHY field */
#define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK               (0x03)


/* SAS IO Unit Page 5 */

typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
    U8          ControlFlags;               /* 0x00 */
    U8          PortWidthModGroup;          /* 0x01 */
    U16         InactivityTimerExponent;    /* 0x02 */
    U8          SATAPartialTimeout;         /* 0x04 */
    U8          Reserved2;                  /* 0x05 */
    U8          SATASlumberTimeout;         /* 0x06 */
    U8          Reserved3;                  /* 0x07 */
    U8          SASPartialTimeout;          /* 0x08 */
    U8          Reserved4;                  /* 0x09 */
    U8          SASSlumberTimeout;          /* 0x0A */
    U8          Reserved5;                  /* 0x0B */
} MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
  MPI2_POINTER PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
  Mpi2SasIOUnit5PhyPmSettings_t, MPI2_POINTER pMpi2SasIOUnit5PhyPmSettings_t;

/* defines for ControlFlags field */
#define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE      (0x08)
#define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE      (0x04)
#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE     (0x02)
#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE     (0x01)

/* defines for PortWidthModeGroup field */
#define MPI2_SASIOUNIT5_PWMG_DISABLE                    (0xFF)

/* defines for InactivityTimerExponent field */
#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER            (0x7000)
#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER           (12)
#define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL            (0x0700)
#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL           (8)
#define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER           (0x0070)
#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER          (4)
#define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL           (0x0007)
#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL          (0)

#define MPI2_SASIOUNIT5_ITE_TEN_SECONDS                 (7)
#define MPI2_SASIOUNIT5_ITE_ONE_SECOND                  (6)
#define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS        (5)
#define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS            (4)
#define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND             (3)
#define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS        (2)
#define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS            (1)
#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND             (0)

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumPhys at runtime.
 */
#ifndef MPI2_SAS_IOUNIT5_PHY_MAX
#define MPI2_SAS_IOUNIT5_PHY_MAX        (1)
#endif

typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 {
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;		/* 0x00 */
    U8                                  NumPhys;	/* 0x08 */
    U8                                  Reserved1;	/* 0x09 */
    U16                                 Reserved2;	/* 0x0A */
    U32                                 Reserved3;	/* 0x0C */
    MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS   SASPhyPowerManagementSettings
					[MPI2_SAS_IOUNIT5_PHY_MAX];  /* 0x10 */
} MPI2_CONFIG_PAGE_SASIOUNIT_5,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
  Mpi2SasIOUnitPage5_t, MPI2_POINTER pMpi2SasIOUnitPage5_t;

#define MPI2_SASIOUNITPAGE5_PAGEVERSION     (0x01)


/* SAS IO Unit Page 6 */

typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS {
    U8          CurrentStatus;              /* 0x00 */
    U8          CurrentModulation;          /* 0x01 */
    U8          CurrentUtilization;         /* 0x02 */
    U8          Reserved1;                  /* 0x03 */
    U32         Reserved2;                  /* 0x04 */
} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
  MPI2_POINTER PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
  Mpi2SasIOUnit6PortWidthModGroupStatus_t,
  MPI2_POINTER pMpi2SasIOUnit6PortWidthModGroupStatus_t;

/* defines for CurrentStatus field */
#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE                      (0x00)
#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED                     (0x01)
#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG                   (0x02)
#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN                        (0x03)
#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY                 (0x04)
#define MPI2_SASIOUNIT6_STATUS_INACTIVE                         (0x05)
#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT                    (0x06)
#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST                      (0x07)

/* defines for CurrentModulation field */
#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT                   (0x00)
#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT                   (0x01)
#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT                   (0x02)
#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT                  (0x03)

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumGroups at runtime.
 */
#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX
#define MPI2_SAS_IOUNIT6_GROUP_MAX      (1)
#endif

typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 {
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
    U32                                 Reserved1;                  /* 0x08 */
    U32                                 Reserved2;                  /* 0x0C */
    U8                                  NumGroups;                  /* 0x10 */
    U8                                  Reserved3;                  /* 0x11 */
    U16                                 Reserved4;                  /* 0x12 */
    MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS
	PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /* 0x14 */
} MPI2_CONFIG_PAGE_SASIOUNIT_6,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6,
  Mpi2SasIOUnitPage6_t, MPI2_POINTER pMpi2SasIOUnitPage6_t;

#define MPI2_SASIOUNITPAGE6_PAGEVERSION     (0x00)


/* SAS IO Unit Page 7 */

typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS {
    U8          Flags;                      /* 0x00 */
    U8          Reserved1;                  /* 0x01 */
    U16         Reserved2;                  /* 0x02 */
    U8          Threshold75Pct;             /* 0x04 */
    U8          Threshold50Pct;             /* 0x05 */
    U8          Threshold25Pct;             /* 0x06 */
    U8          Reserved3;                  /* 0x07 */
} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
  MPI2_POINTER PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
  Mpi2SasIOUnit7PortWidthModGroupSettings_t,
  MPI2_POINTER pMpi2SasIOUnit7PortWidthModGroupSettings_t;

/* defines for Flags field */
#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION  (0x01)


/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumGroups at runtime.
 */
#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX
#define MPI2_SAS_IOUNIT7_GROUP_MAX      (1)
#endif

typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 {
    MPI2_CONFIG_EXTENDED_PAGE_HEADER            Header;             /* 0x00 */
    U8                                          SamplingInterval;   /* 0x08 */
    U8                                          WindowLength;       /* 0x09 */
    U16                                         Reserved1;          /* 0x0A */
    U32                                         Reserved2;          /* 0x0C */
    U32                                         Reserved3;          /* 0x10 */
    U8                                          NumGroups;          /* 0x14 */
    U8                                          Reserved4;          /* 0x15 */
    U16                                         Reserved5;          /* 0x16 */
    MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS
	PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX]; /* 0x18 */
} MPI2_CONFIG_PAGE_SASIOUNIT_7,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7,
  Mpi2SasIOUnitPage7_t, MPI2_POINTER pMpi2SasIOUnitPage7_t;

#define MPI2_SASIOUNITPAGE7_PAGEVERSION     (0x00)


/* SAS IO Unit Page 8 */

typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 {
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;			/* 0x00 */
    U32                                 Reserved1;		/* 0x08 */
    U32                                 PowerManagementCapabilities;/* 0x0C */
    U32                                 Reserved2;		/* 0x10 */
} MPI2_CONFIG_PAGE_SASIOUNIT_8,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8,
  Mpi2SasIOUnitPage8_t, MPI2_POINTER pMpi2SasIOUnitPage8_t;

#define MPI2_SASIOUNITPAGE8_PAGEVERSION     (0x00)

/* defines for PowerManagementCapabilities field */
#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD          (0x00001000)
#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE        (0x00000800)
#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE        (0x00000400)
#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE       (0x00000200)
#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE       (0x00000100)
#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD        (0x00000010)
#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE      (0x00000008)
#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE      (0x00000004)
#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE     (0x00000002)
#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE     (0x00000001)



/* SAS IO Unit Page 16 */

typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT16 {
	MPI2_CONFIG_EXTENDED_PAGE_HEADER  Header;                  /* 0x00 */
	U64                         TimeStamp;                     /* 0x08 */
	U32                         Reserved1;                     /* 0x10 */
	U32                         Reserved2;                     /* 0x14 */
	U32                         FastPathPendedRequests;        /* 0x18 */
	U32                         FastPathUnPendedRequests;      /* 0x1C */
	U32                         FastPathHostRequestStarts;     /* 0x20 */
	U32                         FastPathFirmwareRequestStarts; /* 0x24 */
	U32                         FastPathHostCompletions;       /* 0x28 */
	U32                         FastPathFirmwareCompletions;   /* 0x2C */
	U32                         NonFastPathRequestStarts;      /* 0x30 */
	U32			    NonFastPathHostCompletions;    /* 0x30 */
} MPI2_CONFIG_PAGE_SASIOUNIT16,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT16,
Mpi2SasIOUnitPage16_t, MPI2_POINTER pMpi2SasIOUnitPage16_t;

#define MPI2_SASIOUNITPAGE16_PAGEVERSION    (0x00)


/****************************************************************************
*   SAS Expander Config Pages
****************************************************************************/

/* SAS Expander Page 0 */

typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0
{
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
    U8                                  PhysicalPort;               /* 0x08 */
    U8                                  ReportGenLength;            /* 0x09 */
    U16                                 EnclosureHandle;            /* 0x0A */
    U64                                 SASAddress;                 /* 0x0C */
    U32                                 DiscoveryStatus;            /* 0x14 */
    U16                                 DevHandle;                  /* 0x18 */
    U16                                 ParentDevHandle;            /* 0x1A */
    U16                                 ExpanderChangeCount;        /* 0x1C */
    U16                                 ExpanderRouteIndexes;       /* 0x1E */
    U8                                  NumPhys;                    /* 0x20 */
    U8                                  SASLevel;                   /* 0x21 */
    U16                                 Flags;                      /* 0x22 */
    U16                                 STPBusInactivityTimeLimit;  /* 0x24 */
    U16                                 STPMaxConnectTimeLimit;     /* 0x26 */
    U16                                 STP_SMP_NexusLossTime;      /* 0x28 */
    U16                                 MaxNumRoutedSasAddresses;   /* 0x2A */
    U64                                 ActiveZoneManagerSASAddress;/* 0x2C */
    U16                                 ZoneLockInactivityLimit;    /* 0x34 */
    U16                                 Reserved1;                  /* 0x36 */
    U8                                  TimeToReducedFunc;          /* 0x38 */
    U8                                  InitialTimeToReducedFunc;   /* 0x39 */
    U8                                  MaxReducedFuncTime;         /* 0x3A */
    U8                                  Reserved2;                  /* 0x3B */
} MPI2_CONFIG_PAGE_EXPANDER_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_0,
  Mpi2ExpanderPage0_t, MPI2_POINTER pMpi2ExpanderPage0_t;

#define MPI2_SASEXPANDER0_PAGEVERSION       (0x06)

/* values for SAS Expander Page 0 DiscoveryStatus field */
#define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED         (0x80000000)
#define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED          (0x40000000)
#define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED            (0x20000000)
#define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED          (0x10000000)
#define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR          (0x08000000)
#define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
#define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE         (0x00004000)
#define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN             (0x00002000)
#define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK     (0x00001000)
#define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE            (0x00000800)
#define MPI2_SAS_EXPANDER0_DS_TABLE_LINK                    (0x00000400)
#define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK              (0x00000200)
#define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR                 (0x00000100)
#define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED           (0x00000080)
#define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST               (0x00000040)
#define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES             (0x00000020)
#define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT                   (0x00000010)
#define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS                (0x00000004)
#define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE          (0x00000002)
#define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED                 (0x00000001)

/* values for SAS Expander Page 0 Flags field */
#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY      (0x2000)
#define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED                (0x1000)
#define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES    (0x0800)
#define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES     (0x0400)
#define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT             (0x0200)
#define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING             (0x0100)
#define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT     (0x0080)
#define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE       (0x0010)
#define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG              (0x0004)
#define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS         (0x0002)
#define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG         (0x0001)


/* SAS Expander Page 1 */

typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1
{
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
    U8                                  PhysicalPort;               /* 0x08 */
    U8                                  Reserved1;                  /* 0x09 */
    U16                                 Reserved2;                  /* 0x0A */
    U8                                  NumPhys;                    /* 0x0C */
    U8                                  Phy;                        /* 0x0D */
    U16                                 NumTableEntriesProgrammed;  /* 0x0E */
    U8                                  ProgrammedLinkRate;         /* 0x10 */
    U8                                  HwLinkRate;                 /* 0x11 */
    U16                                 AttachedDevHandle;          /* 0x12 */
    U32                                 PhyInfo;                    /* 0x14 */
    U32                                 AttachedDeviceInfo;         /* 0x18 */
    U16                                 ExpanderDevHandle;          /* 0x1C */
    U8                                  ChangeCount;                /* 0x1E */
    U8                                  NegotiatedLinkRate;         /* 0x1F */
    U8                                  PhyIdentifier;              /* 0x20 */
    U8                                  AttachedPhyIdentifier;      /* 0x21 */
    U8                                  Reserved3;                  /* 0x22 */
    U8                                  DiscoveryInfo;              /* 0x23 */
    U32                                 AttachedPhyInfo;            /* 0x24 */
    U8                                  ZoneGroup;                  /* 0x28 */
    U8                                  SelfConfigStatus;           /* 0x29 */
    U16                                 Reserved4;                  /* 0x2A */
} MPI2_CONFIG_PAGE_EXPANDER_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_1,
  Mpi2ExpanderPage1_t, MPI2_POINTER pMpi2ExpanderPage1_t;

#define MPI2_SASEXPANDER1_PAGEVERSION       (0x02)

/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */

/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */

/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */

/* see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines used for the AttachedDeviceInfo field */

/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */

/* values for SAS Expander Page 1 DiscoveryInfo field */
#define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED    (0x04)
#define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE  (0x02)
#define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES  (0x01)

/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */

/****************************************************************************
*   SAS Device Config Pages
****************************************************************************/

/* SAS Device Page 0 */

typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0
{
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                 /* 0x00 */
    U16                                 Slot;                   /* 0x08 */
    U16                                 EnclosureHandle;        /* 0x0A */
    U64                                 SASAddress;             /* 0x0C */
    U16                                 ParentDevHandle;        /* 0x14 */
    U8                                  PhyNum;                 /* 0x16 */
    U8                                  AccessStatus;           /* 0x17 */
    U16                                 DevHandle;              /* 0x18 */
    U8                                  AttachedPhyIdentifier;  /* 0x1A */
    U8                                  ZoneGroup;              /* 0x1B */
    U32                                 DeviceInfo;             /* 0x1C */
    U16                                 Flags;                  /* 0x20 */
    U8                                  PhysicalPort;           /* 0x22 */
    U8                                  MaxPortConnections;     /* 0x23 */
    U64                                 DeviceName;             /* 0x24 */
    U8                                  PortGroups;             /* 0x2C */
    U8                                  DmaGroup;               /* 0x2D */
    U8                                  ControlGroup;           /* 0x2E */
	U8				 EnclosureLevel;	 /* 0x2F */
	U8				 ConnectorName[4];	 /* 0x30 */
    U32                                 Reserved3;              /* 0x34 */
} MPI2_CONFIG_PAGE_SAS_DEV_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_0,
  Mpi2SasDevicePage0_t, MPI2_POINTER pMpi2SasDevicePage0_t;

#define MPI2_SASDEVICE0_PAGEVERSION         (0x09)

/* values for SAS Device Page 0 AccessStatus field */
#define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS                  (0x00)
#define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED           (0x01)
#define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED     (0x02)
#define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT  (0x03)
#define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION  (0x04)
#define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE      (0x05)
#define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE  (0x06)
#define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED             (0x07)
/* specific values for SATA Init failures */
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN                (0x10)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT   (0x11)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG                   (0x12)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION         (0x13)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER            (0x14)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN                 (0x15)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN                (0x16)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN                (0x17)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION       (0x18)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE        (0x19)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX                    (0x1F)

/* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */

/* values for SAS Device Page 0 Flags field */
#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE          (0x8000)
#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE           (0x1000)
#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE           (0x0800)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY     (0x0400)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE             (0x0200)
#define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE           (0x0100)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED     (0x0080)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED         (0x0040)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED           (0x0020)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED           (0x0010)
#define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH         (0x0008)
#define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID             (0x0002)
#define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT               (0x0001)


/* SAS Device Page 1 */

typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1
{
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                 /* 0x00 */
    U32                                 Reserved1;              /* 0x08 */
    U64                                 SASAddress;             /* 0x0C */
    U32                                 Reserved2;              /* 0x14 */
    U16                                 DevHandle;              /* 0x18 */
    U16                                 Reserved3;              /* 0x1A */
    U8                                  InitialRegDeviceFIS[20];/* 0x1C */
} MPI2_CONFIG_PAGE_SAS_DEV_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_1,
  Mpi2SasDevicePage1_t, MPI2_POINTER pMpi2SasDevicePage1_t;

#define MPI2_SASDEVICE1_PAGEVERSION         (0x01)


/****************************************************************************
*   SAS PHY Config Pages
****************************************************************************/

/* SAS PHY Page 0 */

typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0
{
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                 /* 0x00 */
    U16                                 OwnerDevHandle;         /* 0x08 */
    U16                                 Reserved1;              /* 0x0A */
    U16                                 AttachedDevHandle;      /* 0x0C */
    U8                                  AttachedPhyIdentifier;  /* 0x0E */
    U8                                  Reserved2;              /* 0x0F */
    U32                                 AttachedPhyInfo;        /* 0x10 */
    U8                                  ProgrammedLinkRate;     /* 0x14 */
    U8                                  HwLinkRate;             /* 0x15 */
    U8                                  ChangeCount;            /* 0x16 */
    U8                                  Flags;                  /* 0x17 */
    U32                                 PhyInfo;                /* 0x18 */
    U8                                  NegotiatedLinkRate;     /* 0x1C */
    U8                                  Reserved3;              /* 0x1D */
    U16                                 Reserved4;              /* 0x1E */
} MPI2_CONFIG_PAGE_SAS_PHY_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_0,
  Mpi2SasPhyPage0_t, MPI2_POINTER pMpi2SasPhyPage0_t;

#define MPI2_SASPHY0_PAGEVERSION            (0x03)

/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */

/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */

/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */

/* values for SAS PHY Page 0 Flags field */
#define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC             (0x01)

/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */

/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */


/* SAS PHY Page 1 */

typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1
{
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
    U32                                 Reserved1;                  /* 0x08 */
    U32                                 InvalidDwordCount;          /* 0x0C */
    U32                                 RunningDisparityErrorCount; /* 0x10 */
    U32                                 LossDwordSynchCount;        /* 0x14 */
    U32                                 PhyResetProblemCount;       /* 0x18 */
} MPI2_CONFIG_PAGE_SAS_PHY_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_1,
  Mpi2SasPhyPage1_t, MPI2_POINTER pMpi2SasPhyPage1_t;

#define MPI2_SASPHY1_PAGEVERSION            (0x01)


/* SAS PHY Page 2 */

typedef struct _MPI2_SASPHY2_PHY_EVENT {
    U8          PhyEventCode;       /* 0x00 */
    U8          Reserved1;          /* 0x01 */
    U16         Reserved2;          /* 0x02 */
    U32         PhyEventInfo;       /* 0x04 */
} MPI2_SASPHY2_PHY_EVENT, MPI2_POINTER PTR_MPI2_SASPHY2_PHY_EVENT,
  Mpi2SasPhy2PhyEvent_t, MPI2_POINTER pMpi2SasPhy2PhyEvent_t;

/* use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */


/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumPhyEvents at runtime.
 */
#ifndef MPI2_SASPHY2_PHY_EVENT_MAX
#define MPI2_SASPHY2_PHY_EVENT_MAX      (1)
#endif

typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 {
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
    U32                                 Reserved1;                  /* 0x08 */
    U8                                  NumPhyEvents;               /* 0x0C */
    U8                                  Reserved2;                  /* 0x0D */
    U16                                 Reserved3;                  /* 0x0E */
    MPI2_SASPHY2_PHY_EVENT              PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX];
								/* 0x10 */
} MPI2_CONFIG_PAGE_SAS_PHY_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_2,
  Mpi2SasPhyPage2_t, MPI2_POINTER pMpi2SasPhyPage2_t;

#define MPI2_SASPHY2_PAGEVERSION            (0x00)


/* SAS PHY Page 3 */

typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG {
    U8          PhyEventCode;       /* 0x00 */
    U8          Reserved1;          /* 0x01 */
    U16         Reserved2;          /* 0x02 */
    U8          CounterType;        /* 0x04 */
    U8          ThresholdWindow;    /* 0x05 */
    U8          TimeUnits;          /* 0x06 */
    U8          Reserved3;          /* 0x07 */
    U32         EventThreshold;     /* 0x08 */
    U16         ThresholdFlags;     /* 0x0C */
    U16         Reserved4;          /* 0x0E */
} MPI2_SASPHY3_PHY_EVENT_CONFIG, MPI2_POINTER PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG,
  Mpi2SasPhy3PhyEventConfig_t, MPI2_POINTER pMpi2SasPhy3PhyEventConfig_t;

/* values for PhyEventCode field */
#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT                    (0x00)
#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD               (0x01)
#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR     (0x02)
#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC             (0x03)
#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM           (0x04)
#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW     (0x05)
#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR                    (0x06)
#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR         (0x20)
#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT           (0x21)
#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT           (0x22)
#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT           (0x23)
#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT           (0x24)
#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON   (0x25)
#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON   (0x26)
#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK                    (0x27)
#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK                    (0x28)
#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT               (0x29)
#define MPI2_SASPHY3_EVENT_CODE_CONNECTION                  (0x2A)
#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED      (0x2B)
#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME        (0x2C)
#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME          (0x2D)
#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME           (0x2E)
#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES               (0x40)
#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES               (0x41)
#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES         (0x42)
#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES         (0x43)
#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED           (0x44)
#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED           (0x45)
#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES              (0x50)
#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES              (0x51)
#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW               (0x52)
#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES               (0x60)
#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES               (0x61)
#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES         (0x63)
#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT             (0xD0)
#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE    (0xD1)
#define MPI2_SASPHY3_EVENT_CODE_RX_AIP                      (0xD2)

/* values for the CounterType field */
#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING                  (0x00)
#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING                (0x01)
#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE                (0x02)

/* values for the TimeUnits field */
#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS             (0x00)
#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS            (0x01)
#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND               (0x02)
#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS             (0x03)

/* values for the ThresholdFlags field */
#define MPI2_SASPHY3_TFLAGS_PHY_RESET                       (0x0002)
#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY                    (0x0001)

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumPhyEvents at runtime.
 */
#ifndef MPI2_SASPHY3_PHY_EVENT_MAX
#define MPI2_SASPHY3_PHY_EVENT_MAX      (1)
#endif

typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 {
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
    U32                                 Reserved1;                  /* 0x08 */
    U8                                  NumPhyEvents;               /* 0x0C */
    U8                                  Reserved2;                  /* 0x0D */
    U16                                 Reserved3;                  /* 0x0E */
    MPI2_SASPHY3_PHY_EVENT_CONFIG       PhyEventConfig
					[MPI2_SASPHY3_PHY_EVENT_MAX]; /* 0x10 */
} MPI2_CONFIG_PAGE_SAS_PHY_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_3,
  Mpi2SasPhyPage3_t, MPI2_POINTER pMpi2SasPhyPage3_t;

#define MPI2_SASPHY3_PAGEVERSION            (0x00)


/* SAS PHY Page 4 */

typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4 {
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
    U16                                 Reserved1;                  /* 0x08 */
    U8                                  Reserved2;                  /* 0x0A */
    U8                                  Flags;                      /* 0x0B */
    U8                                  InitialFrame[28];           /* 0x0C */
} MPI2_CONFIG_PAGE_SAS_PHY_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_4,
  Mpi2SasPhyPage4_t, MPI2_POINTER pMpi2SasPhyPage4_t;

#define MPI2_SASPHY4_PAGEVERSION            (0x00)

/* values for the Flags field */
#define MPI2_SASPHY4_FLAGS_FRAME_VALID        (0x02)
#define MPI2_SASPHY4_FLAGS_SATA_FRAME         (0x01)




/****************************************************************************
*   SAS Port Config Pages
****************************************************************************/

/* SAS Port Page 0 */

typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0
{
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
    U8                                  PortNumber;                 /* 0x08 */
    U8                                  PhysicalPort;               /* 0x09 */
    U8                                  PortWidth;                  /* 0x0A */
    U8                                  PhysicalPortWidth;          /* 0x0B */
    U8                                  ZoneGroup;                  /* 0x0C */
    U8                                  Reserved1;                  /* 0x0D */
    U16                                 Reserved2;                  /* 0x0E */
    U64                                 SASAddress;                 /* 0x10 */
    U32                                 DeviceInfo;                 /* 0x18 */
    U32                                 Reserved3;                  /* 0x1C */
    U32                                 Reserved4;                  /* 0x20 */
} MPI2_CONFIG_PAGE_SAS_PORT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PORT_0,
  Mpi2SasPortPage0_t, MPI2_POINTER pMpi2SasPortPage0_t;

#define MPI2_SASPORT0_PAGEVERSION           (0x00)

/* see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */


/****************************************************************************
*   SAS Enclosure Config Pages
****************************************************************************/

/* SAS Enclosure Page 0 */

typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0
{
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
    U32                                 Reserved1;                  /* 0x08 */
    U64                                 EnclosureLogicalID;         /* 0x0C */
    U16                                 Flags;                      /* 0x14 */
    U16                                 EnclosureHandle;            /* 0x16 */
    U16                                 NumSlots;                   /* 0x18 */
    U16                                 StartSlot;                  /* 0x1A */
	U8				 Reserved2;		     /* 0x1C */
	U8				 EnclosureLevel;	     /* 0x1D */
    U16                                 SEPDevHandle;               /* 0x1E */
    U32                                 Reserved3;                  /* 0x20 */
    U32                                 Reserved4;                  /* 0x24 */
} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
  Mpi2SasEnclosurePage0_t, MPI2_POINTER pMpi2SasEnclosurePage0_t;

#define MPI2_SASENCLOSURE0_PAGEVERSION      (0x04)

/* values for SAS Enclosure Page 0 Flags field */
#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID      (0x0010)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK              (0x000F)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN           (0x0000)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES           (0x0001)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO         (0x0002)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO         (0x0003)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE     (0x0004)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO          (0x0005)


/****************************************************************************
*   Log Config Page
****************************************************************************/

/* Log Page 0 */

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumLogEntries at runtime.
 */
#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES
#define MPI2_LOG_0_NUM_LOG_ENTRIES          (1)
#endif

#define MPI2_LOG_0_LOG_DATA_LENGTH          (0x1C)

typedef struct _MPI2_LOG_0_ENTRY
{
    U64         TimeStamp;                          /* 0x00 */
    U32         Reserved1;                          /* 0x08 */
    U16         LogSequence;                        /* 0x0C */
    U16         LogEntryQualifier;                  /* 0x0E */
    U8          VP_ID;                              /* 0x10 */
    U8          VF_ID;                              /* 0x11 */
    U16         Reserved2;                          /* 0x12 */
    U8          LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/* 0x14 */
} MPI2_LOG_0_ENTRY, MPI2_POINTER PTR_MPI2_LOG_0_ENTRY,
  Mpi2Log0Entry_t, MPI2_POINTER pMpi2Log0Entry_t;

/* values for Log Page 0 LogEntry LogEntryQualifier field */
#define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED          (0x0000)
#define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET        (0x0001)
#define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE      (0x0002)
#define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC    (0x8000)
#define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC    (0xFFFF)

typedef struct _MPI2_CONFIG_PAGE_LOG_0
{
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
    U32                                 Reserved1;                  /* 0x08 */
    U32                                 Reserved2;                  /* 0x0C */
    U16                                 NumLogEntries;              /* 0x10 */
    U16                                 Reserved3;                  /* 0x12 */
    MPI2_LOG_0_ENTRY                    LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /* 0x14 */
} MPI2_CONFIG_PAGE_LOG_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_LOG_0,
  Mpi2LogPage0_t, MPI2_POINTER pMpi2LogPage0_t;

#define MPI2_LOG_0_PAGEVERSION              (0x02)


/****************************************************************************
*   RAID Config Page
****************************************************************************/

/* RAID Page 0 */

/*
 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 * one and check the value returned for NumElements at runtime.
 */
#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS
#define MPI2_RAIDCONFIG0_MAX_ELEMENTS       (1)
#endif

typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT
{
    U16                     ElementFlags;               /* 0x00 */
    U16                     VolDevHandle;               /* 0x02 */
    U8                      HotSparePool;               /* 0x04 */
    U8                      PhysDiskNum;                /* 0x05 */
    U16                     PhysDiskDevHandle;          /* 0x06 */
} MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
  MPI2_POINTER PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
  Mpi2RaidConfig0ConfigElement_t, MPI2_POINTER pMpi2RaidConfig0ConfigElement_t;

/* values for the ElementFlags field */
#define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE       (0x000F)
#define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT          (0x0000)
#define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT   (0x0001)
#define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT       (0x0002)
#define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT             (0x0003)


typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0
{
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
    U8                                  NumHotSpares;               /* 0x08 */
    U8                                  NumPhysDisks;               /* 0x09 */
    U8                                  NumVolumes;                 /* 0x0A */
    U8                                  ConfigNum;                  /* 0x0B */
    U32                                 Flags;                      /* 0x0C */
    U8                                  ConfigGUID[24];             /* 0x10 */
    U32                                 Reserved1;                  /* 0x28 */
    U8                                  NumElements;                /* 0x2C */
    U8                                  Reserved2;                  /* 0x2D */
    U16                                 Reserved3;                  /* 0x2E */
    MPI2_RAIDCONFIG0_CONFIG_ELEMENT     ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /* 0x30 */
} MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
  Mpi2RaidConfigurationPage0_t, MPI2_POINTER pMpi2RaidConfigurationPage0_t;

#define MPI2_RAIDCONFIG0_PAGEVERSION            (0x00)

/* values for RAID Configuration Page 0 Flags field */
#define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG        (0x00000001)


/****************************************************************************
*   Driver Persistent Mapping Config Pages
****************************************************************************/

/* Driver Persistent Mapping Page 0 */

typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY
{
    U64                                 PhysicalIdentifier;         /* 0x00 */
    U16                                 MappingInformation;         /* 0x08 */
    U16                                 DeviceIndex;                /* 0x0A */
    U32                                 PhysicalBitsMapping;        /* 0x0C */
    U32                                 Reserved1;                  /* 0x10 */
} MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
  Mpi2DriverMap0Entry_t, MPI2_POINTER pMpi2DriverMap0Entry_t;

typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0
{
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
    MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY  Entry;                      /* 0x08 */
} MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
  Mpi2DriverMappingPage0_t, MPI2_POINTER pMpi2DriverMappingPage0_t;

#define MPI2_DRIVERMAPPING0_PAGEVERSION         (0x00)

/* values for Driver Persistent Mapping Page 0 MappingInformation field */
#define MPI2_DRVMAP0_MAPINFO_SLOT_MASK              (0x07F0)
#define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT             (4)
#define MPI2_DRVMAP0_MAPINFO_MISSING_MASK           (0x000F)


/****************************************************************************
*   Ethernet Config Pages
****************************************************************************/

/* Ethernet Page 0 */

/* IP address (union of IPv4 and IPv6) */
typedef union _MPI2_ETHERNET_IP_ADDR {
    U32     IPv4Addr;
    U32     IPv6Addr[4];
} MPI2_ETHERNET_IP_ADDR, MPI2_POINTER PTR_MPI2_ETHERNET_IP_ADDR,
  Mpi2EthernetIpAddr_t, MPI2_POINTER pMpi2EthernetIpAddr_t;

#define MPI2_ETHERNET_HOST_NAME_LENGTH          (32)

typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 {
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                 /* 0x00 */
    U8                                  NumInterfaces;          /* 0x08 */
    U8                                  Reserved0;              /* 0x09 */
    U16                                 Reserved1;              /* 0x0A */
    U32                                 Status;                 /* 0x0C */
    U8                                  MediaState;             /* 0x10 */
    U8                                  Reserved2;              /* 0x11 */
    U16                                 Reserved3;              /* 0x12 */
    U8                                  MacAddress[6];          /* 0x14 */
    U8                                  Reserved4;              /* 0x1A */
    U8                                  Reserved5;              /* 0x1B */
    MPI2_ETHERNET_IP_ADDR               IpAddress;              /* 0x1C */
    MPI2_ETHERNET_IP_ADDR               SubnetMask;             /* 0x2C */
    MPI2_ETHERNET_IP_ADDR               GatewayIpAddress;       /* 0x3C */
    MPI2_ETHERNET_IP_ADDR               DNS1IpAddress;          /* 0x4C */
    MPI2_ETHERNET_IP_ADDR               DNS2IpAddress;          /* 0x5C */
    MPI2_ETHERNET_IP_ADDR               DhcpIpAddress;          /* 0x6C */
    U8                                  HostName
				[MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */
} MPI2_CONFIG_PAGE_ETHERNET_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_0,
  Mpi2EthernetPage0_t, MPI2_POINTER pMpi2EthernetPage0_t;

#define MPI2_ETHERNETPAGE0_PAGEVERSION   (0x00)

/* values for Ethernet Page 0 Status field */
#define MPI2_ETHPG0_STATUS_IPV6_CAPABLE             (0x80000000)
#define MPI2_ETHPG0_STATUS_IPV4_CAPABLE             (0x40000000)
#define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED        (0x20000000)
#define MPI2_ETHPG0_STATUS_DEFAULT_IF               (0x00000100)
#define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED         (0x00000080)
#define MPI2_ETHPG0_STATUS_TELNET_ENABLED           (0x00000040)
#define MPI2_ETHPG0_STATUS_SSH2_ENABLED             (0x00000020)
#define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED      (0x00000010)
#define MPI2_ETHPG0_STATUS_IPV6_ENABLED             (0x00000008)
#define MPI2_ETHPG0_STATUS_IPV4_ENABLED             (0x00000004)
#define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES           (0x00000002)
#define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED           (0x00000001)

/* values for Ethernet Page 0 MediaState field */
#define MPI2_ETHPG0_MS_DUPLEX_MASK                  (0x80)
#define MPI2_ETHPG0_MS_HALF_DUPLEX                  (0x00)
#define MPI2_ETHPG0_MS_FULL_DUPLEX                  (0x80)

#define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK           (0x07)
#define MPI2_ETHPG0_MS_NOT_CONNECTED                (0x00)
#define MPI2_ETHPG0_MS_10MBIT                       (0x01)
#define MPI2_ETHPG0_MS_100MBIT                      (0x02)
#define MPI2_ETHPG0_MS_1GBIT                        (0x03)


/* Ethernet Page 1 */

typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 {
    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                 /* 0x00 */
    U32                                 Reserved0;              /* 0x08 */
    U32                                 Flags;                  /* 0x0C */
    U8                                  MediaState;             /* 0x10 */
    U8                                  Reserved1;              /* 0x11 */
    U16                                 Reserved2;              /* 0x12 */
    U8                                  MacAddress[6];          /* 0x14 */
    U8                                  Reserved3;              /* 0x1A */
    U8                                  Reserved4;              /* 0x1B */
    MPI2_ETHERNET_IP_ADDR               StaticIpAddress;        /* 0x1C */
    MPI2_ETHERNET_IP_ADDR               StaticSubnetMask;       /* 0x2C */
    MPI2_ETHERNET_IP_ADDR               StaticGatewayIpAddress; /* 0x3C */
    MPI2_ETHERNET_IP_ADDR               StaticDNS1IpAddress;    /* 0x4C */
    MPI2_ETHERNET_IP_ADDR               StaticDNS2IpAddress;    /* 0x5C */
    U32                                 Reserved5;              /* 0x6C */
    U32                                 Reserved6;              /* 0x70 */
    U32                                 Reserved7;              /* 0x74 */
    U32                                 Reserved8;              /* 0x78 */
    U8                                  HostName
				[MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */
} MPI2_CONFIG_PAGE_ETHERNET_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_1,
  Mpi2EthernetPage1_t, MPI2_POINTER pMpi2EthernetPage1_t;

#define MPI2_ETHERNETPAGE1_PAGEVERSION   (0x00)

/* values for Ethernet Page 1 Flags field */
#define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF             (0x00000100)
#define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD         (0x00000080)
#define MPI2_ETHPG1_FLAG_ENABLE_TELNET              (0x00000040)
#define MPI2_ETHPG1_FLAG_ENABLE_SSH2                (0x00000020)
#define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT         (0x00000010)
#define MPI2_ETHPG1_FLAG_ENABLE_IPV6                (0x00000008)
#define MPI2_ETHPG1_FLAG_ENABLE_IPV4                (0x00000004)
#define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES         (0x00000002)
#define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF              (0x00000001)

/* values for Ethernet Page 1 MediaState field */
#define MPI2_ETHPG1_MS_DUPLEX_MASK                  (0x80)
#define MPI2_ETHPG1_MS_HALF_DUPLEX                  (0x00)
#define MPI2_ETHPG1_MS_FULL_DUPLEX                  (0x80)

#define MPI2_ETHPG1_MS_DATA_RATE_MASK               (0x07)
#define MPI2_ETHPG1_MS_DATA_RATE_AUTO               (0x00)
#define MPI2_ETHPG1_MS_DATA_RATE_10MBIT             (0x01)
#define MPI2_ETHPG1_MS_DATA_RATE_100MBIT            (0x02)
#define MPI2_ETHPG1_MS_DATA_RATE_1GBIT              (0x03)


/****************************************************************************
*   Extended Manufacturing Config Pages
****************************************************************************/

/*
 * Generic structure to use for product-specific extended manufacturing pages
 * (currently Extended Manufacturing Page 40 through Extended Manufacturing
 * Page 60).
 */

typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS {
	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                 /* 0x00 */
	U32                                 ProductSpecificInfo;    /* 0x08 */
}	MPI2_CONFIG_PAGE_EXT_MAN_PS,
	MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS,
	Mpi2ExtManufacturingPagePS_t,
	MPI2_POINTER pMpi2ExtManufacturingPagePS_t;

/* PageVersion should be provided by product-specific code */

#endif