linux_kernel/include/rxrpc/packet.h

/* packet.h: Rx packet layout and definitions
 *
 * Copyright (C) 2002, 2007 Red Hat, Inc. All Rights Reserved.
 * Written by David Howells (dhowells@redhat.com)
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 */

#ifndef _LINUX_RXRPC_PACKET_H
#define _LINUX_RXRPC_PACKET_H

typedef u32	rxrpc_seq_t;	/* Rx message sequence number */
typedef u32	rxrpc_serial_t;	/* Rx message serial number */
typedef __be32	rxrpc_seq_net_t; /* on-the-wire Rx message sequence number */
typedef __be32	rxrpc_serial_net_t; /* on-the-wire Rx message serial number */

/*****************************************************************************/
/*
 * on-the-wire Rx packet header
 * - all multibyte fields should be in network byte order
 */
struct rxrpc_wire_header {
	__be32		epoch;		/* client boot timestamp */

	__be32		cid;		/* connection and channel ID */
#define RXRPC_MAXCALLS		4			/* max active calls per conn */
#define RXRPC_CHANNELMASK	(RXRPC_MAXCALLS-1)	/* mask for channel ID */
#define RXRPC_CIDMASK		(~RXRPC_CHANNELMASK)	/* mask for connection ID */
#define RXRPC_CIDSHIFT		ilog2(RXRPC_MAXCALLS)	/* shift for connection ID */
#define RXRPC_CID_INC		(1 << RXRPC_CIDSHIFT)	/* connection ID increment */

	__be32		callNumber;	/* call ID (0 for connection-level packets) */
#define RXRPC_PROCESS_MAXCALLS	(1<<2)	/* maximum number of active calls per conn (power of 2) */

	__be32		seq;		/* sequence number of pkt in call stream */
	__be32		serial;		/* serial number of pkt sent to network */

	uint8_t		type;		/* packet type */
#define RXRPC_PACKET_TYPE_DATA		1	/* data */
#define RXRPC_PACKET_TYPE_ACK		2	/* ACK */
#define RXRPC_PACKET_TYPE_BUSY		3	/* call reject */
#define RXRPC_PACKET_TYPE_ABORT		4	/* call/connection abort */
#define RXRPC_PACKET_TYPE_ACKALL	5	/* ACK all outstanding packets on call */
#define RXRPC_PACKET_TYPE_CHALLENGE	6	/* connection security challenge (SRVR->CLNT) */
#define RXRPC_PACKET_TYPE_RESPONSE	7	/* connection secutity response (CLNT->SRVR) */
#define RXRPC_PACKET_TYPE_DEBUG		8	/* debug info request */
#define RXRPC_PACKET_TYPE_VERSION	13	/* version string request */
#define RXRPC_N_PACKET_TYPES		14	/* number of packet types (incl type 0) */

	uint8_t		flags;		/* packet flags */
#define RXRPC_CLIENT_INITIATED	0x01		/* signifies a packet generated by a client */
#define RXRPC_REQUEST_ACK	0x02		/* request an unconditional ACK of this packet */
#define RXRPC_LAST_PACKET	0x04		/* the last packet from this side for this call */
#define RXRPC_MORE_PACKETS	0x08		/* more packets to come */
#define RXRPC_JUMBO_PACKET	0x20		/* [DATA] this is a jumbo packet */
#define RXRPC_SLOW_START_OK	0x20		/* [ACK] slow start supported */

	uint8_t		userStatus;	/* app-layer defined status */
	uint8_t		securityIndex;	/* security protocol ID */
	union {
		__be16	_rsvd;		/* reserved */
		__be16	cksum;		/* kerberos security checksum */
	};
	__be16		serviceId;	/* service ID */

} __packed;

extern const char *rxrpc_pkts[];

#define RXRPC_SUPPORTED_PACKET_TYPES (			\
		(1 << RXRPC_PACKET_TYPE_DATA) |		\
		(1 << RXRPC_PACKET_TYPE_ACK) |		\
		(1 << RXRPC_PACKET_TYPE_BUSY) |		\
		(1 << RXRPC_PACKET_TYPE_ABORT) |	\
		(1 << RXRPC_PACKET_TYPE_ACKALL) |	\
		(1 << RXRPC_PACKET_TYPE_CHALLENGE) |	\
		(1 << RXRPC_PACKET_TYPE_RESPONSE) |	\
		/*(1 << RXRPC_PACKET_TYPE_DEBUG) | */	\
		(1 << RXRPC_PACKET_TYPE_VERSION))

/*****************************************************************************/
/*
 * jumbo packet secondary header
 * - can be mapped to read header by:
 *   - new_serial = serial + 1
 *   - new_seq = seq + 1
 *   - new_flags = j_flags
 *   - new__rsvd = j__rsvd
 *   - duplicating all other fields
 */
struct rxrpc_jumbo_header {
	uint8_t		flags;		/* packet flags (as per rxrpc_header) */
	uint8_t		pad;
	__be16		_rsvd;		/* reserved (used by kerberos security as cksum) */
};

#define RXRPC_JUMBO_DATALEN	1412	/* non-terminal jumbo packet data length */

/*****************************************************************************/
/*
 * on-the-wire Rx ACK packet data payload
 * - all multibyte fields should be in network byte order
 */
struct rxrpc_ackpacket {
	__be16		bufferSpace;	/* number of packet buffers available */
	__be16		maxSkew;	/* diff between serno being ACK'd and highest serial no
					 * received */
	__be32		firstPacket;	/* sequence no of first ACK'd packet in attached list */
	__be32		previousPacket;	/* sequence no of previous packet received */
	__be32		serial;		/* serial no of packet that prompted this ACK */

	uint8_t		reason;		/* reason for ACK */
#define RXRPC_ACK_REQUESTED		1	/* ACK was requested on packet */
#define RXRPC_ACK_DUPLICATE		2	/* duplicate packet received */
#define RXRPC_ACK_OUT_OF_SEQUENCE	3	/* out of sequence packet received */
#define RXRPC_ACK_EXCEEDS_WINDOW	4	/* packet received beyond end of ACK window */
#define RXRPC_ACK_NOSPACE		5	/* packet discarded due to lack of buffer space */
#define RXRPC_ACK_PING			6	/* keep alive ACK */
#define RXRPC_ACK_PING_RESPONSE		7	/* response to RXRPC_ACK_PING */
#define RXRPC_ACK_DELAY			8	/* nothing happened since received packet */
#define RXRPC_ACK_IDLE			9	/* ACK due to fully received ACK window */

	uint8_t		nAcks;		/* number of ACKs */
#define RXRPC_MAXACKS	255

	uint8_t		acks[0];	/* list of ACK/NAKs */
#define RXRPC_ACK_TYPE_NACK		0
#define RXRPC_ACK_TYPE_ACK		1

} __packed;

/*
 * ACK packets can have a further piece of information tagged on the end
 */
struct rxrpc_ackinfo {
	__be32		rxMTU;		/* maximum Rx MTU size (bytes) [AFS 3.3] */
	__be32		maxMTU;		/* maximum interface MTU size (bytes) [AFS 3.3] */
	__be32		rwind;		/* Rx window size (packets) [AFS 3.4] */
	__be32		jumbo_max;	/* max packets to stick into a jumbo packet [AFS 3.5] */
};

/*****************************************************************************/
/*
 * Kerberos security type-2 challenge packet
 */
struct rxkad_challenge {
	__be32		version;	/* version of this challenge type */
	__be32		nonce;		/* encrypted random number */
	__be32		min_level;	/* minimum security level */
	__be32		__padding;	/* padding to 8-byte boundary */
} __packed;

/*****************************************************************************/
/*
 * Kerberos security type-2 response packet
 */
struct rxkad_response {
	__be32		version;	/* version of this response type */
	__be32		__pad;

	/* encrypted bit of the response */
	struct {
		__be32		epoch;		/* current epoch */
		__be32		cid;		/* parent connection ID */
		__be32		checksum;	/* checksum */
		__be32		securityIndex;	/* security type */
		__be32		call_id[4];	/* encrypted call IDs */
		__be32		inc_nonce;	/* challenge nonce + 1 */
		__be32		level;		/* desired level */
	} encrypted;

	__be32		kvno;		/* Kerberos key version number */
	__be32		ticket_len;	/* Kerberos ticket length  */
} __packed;

/*****************************************************************************/
/*
 * RxRPC-level abort codes
 */
#define RX_CALL_DEAD		-1	/* call/conn has been inactive and is shut down */
#define RX_INVALID_OPERATION	-2	/* invalid operation requested / attempted */
#define RX_CALL_TIMEOUT		-3	/* call timeout exceeded */
#define RX_EOF			-4	/* unexpected end of data on read op */
#define RX_PROTOCOL_ERROR	-5	/* low-level protocol error */
#define RX_USER_ABORT		-6	/* generic user abort */
#define RX_ADDRINUSE		-7	/* UDP port in use */
#define RX_DEBUGI_BADTYPE	-8	/* bad debugging packet type */

/*
 * (un)marshalling abort codes (rxgen)
 */
#define	RXGEN_CC_MARSHAL    -450
#define	RXGEN_CC_UNMARSHAL  -451
#define	RXGEN_SS_MARSHAL    -452
#define	RXGEN_SS_UNMARSHAL  -453
#define	RXGEN_DECODE	    -454
#define	RXGEN_OPCODE	    -455
#define	RXGEN_SS_XDRFREE    -456
#define	RXGEN_CC_XDRFREE    -457

/*
 * Rx kerberos security abort codes
 * - unfortunately we have no generalised security abort codes to say things
 *   like "unsupported security", so we have to use these instead and hope the
 *   other side understands
 */
#define RXKADINCONSISTENCY	19270400	/* security module structure inconsistent */
#define RXKADPACKETSHORT	19270401	/* packet too short for security challenge */
#define RXKADLEVELFAIL		19270402	/* security level negotiation failed */
#define RXKADTICKETLEN		19270403	/* ticket length too short or too long */
#define RXKADOUTOFSEQUENCE	19270404	/* packet had bad sequence number */
#define RXKADNOAUTH		19270405	/* caller not authorised */
#define RXKADBADKEY		19270406	/* illegal key: bad parity or weak */
#define RXKADBADTICKET		19270407	/* security object was passed a bad ticket */
#define RXKADUNKNOWNKEY		19270408	/* ticket contained unknown key version number */
#define RXKADEXPIRED		19270409	/* authentication expired */
#define RXKADSEALEDINCON	19270410	/* sealed data inconsistent */
#define RXKADDATALEN		19270411	/* user data too long */
#define RXKADILLEGALLEVEL	19270412	/* caller not authorised to use encrypted conns */

#endif /* _LINUX_RXRPC_PACKET_H */