| 1234567891011121314151617181920212223242526272829303132333435 |
- obj-$(CONFIG_PCI_FTPCI100) += pci-ftpci100.o
- obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
- obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
- obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
- obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
- obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
- obj-$(CONFIG_PCIE_RCAR) += pcie-rcar.o
- obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
- obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
- obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
- obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
- obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
- obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
- obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
- obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o
- obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
- obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
- obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
- obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
- obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
- obj-$(CONFIG_VMD) += vmd.o
- # The following drivers are for devices that use the generic ACPI
- # pci_root.c driver but don't support standard ECAM config access.
- # They contain MCFG quirks to replace the generic ECAM accessors with
- # device-specific ones that are shared with the DT driver.
- # The ACPI driver is generic and should not require driver-specific
- # config options to be enabled, so we always build these drivers on
- # ARM64 and use internal ifdefs to only build the pieces we need
- # depending on whether ACPI, the DT driver, or both are enabled.
- obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
- obj-$(CONFIG_ARM64) += pci-thunder-pem.o
- obj-$(CONFIG_ARM64) += pci-xgene.o
|
