linux_kernel/drivers/net/wireless/ath/ath10k/wmi.h

/*
 * Copyright (c) 2005-2011 Atheros Communications Inc.
 * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#ifndef _WMI_H_
#define _WMI_H_

#include <linux/types.h>
#include <net/mac80211.h>

/*
 * This file specifies the WMI interface for the Unified Software
 * Architecture.
 *
 * It includes definitions of all the commands and events. Commands are
 * messages from the host to the target. Events and Replies are messages
 * from the target to the host.
 *
 * Ownership of correctness in regards to WMI commands belongs to the host
 * driver and the target is not required to validate parameters for value,
 * proper range, or any other checking.
 *
 * Guidelines for extending this interface are below.
 *
 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
 *
 * 2. Use ONLY u32 type for defining member variables within WMI
 *    command/event structures. Do not use u8, u16, bool or
 *    enum types within these structures.
 *
 * 3. DO NOT define bit fields within structures. Implement bit fields
 *    using masks if necessary. Do not use the programming language's bit
 *    field definition.
 *
 * 4. Define macros for encode/decode of u8, u16 fields within
 *    the u32 variables. Use these macros for set/get of these fields.
 *    Try to use this to optimize the structure without bloating it with
 *    u32 variables for every lower sized field.
 *
 * 5. Do not use PACK/UNPACK attributes for the structures as each member
 *    variable is already 4-byte aligned by virtue of being a u32
 *    type.
 *
 * 6. Comment each parameter part of the WMI command/event structure by
 *    using the 2 stars at the beginning of C comment instead of one star to
 *    enable HTML document generation using Doxygen.
 *
 */

/* Control Path */
struct wmi_cmd_hdr {
	__le32 cmd_id;
} __packed;

#define WMI_CMD_HDR_CMD_ID_MASK   0x00FFFFFF
#define WMI_CMD_HDR_CMD_ID_LSB    0
#define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
#define WMI_CMD_HDR_PLT_PRIV_LSB  24

#define HTC_PROTOCOL_VERSION    0x0002
#define WMI_PROTOCOL_VERSION    0x0002

/*
 * There is no signed version of __le32, so for a temporary solution come
 * up with our own version. The idea is from fs/ntfs/endian.h.
 *
 * Use a_ prefix so that it doesn't conflict if we get proper support to
 * linux/types.h.
 */
typedef __s32 __bitwise a_sle32;

static inline a_sle32 a_cpu_to_sle32(s32 val)
{
	return (__force a_sle32)cpu_to_le32(val);
}

static inline s32 a_sle32_to_cpu(a_sle32 val)
{
	return le32_to_cpu((__force __le32)val);
}

enum wmi_service {
	WMI_SERVICE_BEACON_OFFLOAD = 0,
	WMI_SERVICE_SCAN_OFFLOAD,
	WMI_SERVICE_ROAM_OFFLOAD,
	WMI_SERVICE_BCN_MISS_OFFLOAD,
	WMI_SERVICE_STA_PWRSAVE,
	WMI_SERVICE_STA_ADVANCED_PWRSAVE,
	WMI_SERVICE_AP_UAPSD,
	WMI_SERVICE_AP_DFS,
	WMI_SERVICE_11AC,
	WMI_SERVICE_BLOCKACK,
	WMI_SERVICE_PHYERR,
	WMI_SERVICE_BCN_FILTER,
	WMI_SERVICE_RTT,
	WMI_SERVICE_RATECTRL,
	WMI_SERVICE_WOW,
	WMI_SERVICE_RATECTRL_CACHE,
	WMI_SERVICE_IRAM_TIDS,
	WMI_SERVICE_ARPNS_OFFLOAD,
	WMI_SERVICE_NLO,
	WMI_SERVICE_GTK_OFFLOAD,
	WMI_SERVICE_SCAN_SCH,
	WMI_SERVICE_CSA_OFFLOAD,
	WMI_SERVICE_CHATTER,
	WMI_SERVICE_COEX_FREQAVOID,
	WMI_SERVICE_PACKET_POWER_SAVE,
	WMI_SERVICE_FORCE_FW_HANG,
	WMI_SERVICE_GPIO,
	WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
	WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
	WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
	WMI_SERVICE_STA_KEEP_ALIVE,
	WMI_SERVICE_TX_ENCAP,
	WMI_SERVICE_BURST,
	WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
	WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
	WMI_SERVICE_ROAM_SCAN_OFFLOAD,
	WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
	WMI_SERVICE_EARLY_RX,
	WMI_SERVICE_STA_SMPS,
	WMI_SERVICE_FWTEST,
	WMI_SERVICE_STA_WMMAC,
	WMI_SERVICE_TDLS,
	WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
	WMI_SERVICE_ADAPTIVE_OCS,
	WMI_SERVICE_BA_SSN_SUPPORT,
	WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
	WMI_SERVICE_WLAN_HB,
	WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
	WMI_SERVICE_BATCH_SCAN,
	WMI_SERVICE_QPOWER,
	WMI_SERVICE_PLMREQ,
	WMI_SERVICE_THERMAL_MGMT,
	WMI_SERVICE_RMC,
	WMI_SERVICE_MHF_OFFLOAD,
	WMI_SERVICE_COEX_SAR,
	WMI_SERVICE_BCN_TXRATE_OVERRIDE,
	WMI_SERVICE_NAN,
	WMI_SERVICE_L1SS_STAT,
	WMI_SERVICE_ESTIMATE_LINKSPEED,
	WMI_SERVICE_OBSS_SCAN,
	WMI_SERVICE_TDLS_OFFCHAN,
	WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
	WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
	WMI_SERVICE_IBSS_PWRSAVE,
	WMI_SERVICE_LPASS,
	WMI_SERVICE_EXTSCAN,
	WMI_SERVICE_D0WOW,
	WMI_SERVICE_HSOFFLOAD,
	WMI_SERVICE_ROAM_HO_OFFLOAD,
	WMI_SERVICE_RX_FULL_REORDER,
	WMI_SERVICE_DHCP_OFFLOAD,
	WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
	WMI_SERVICE_MDNS_OFFLOAD,
	WMI_SERVICE_SAP_AUTH_OFFLOAD,
	WMI_SERVICE_ATF,
	WMI_SERVICE_COEX_GPIO,
	WMI_SERVICE_ENHANCED_PROXY_STA,
	WMI_SERVICE_TT,
	WMI_SERVICE_PEER_CACHING,
	WMI_SERVICE_AUX_SPECTRAL_INTF,
	WMI_SERVICE_AUX_CHAN_LOAD_INTF,
	WMI_SERVICE_BSS_CHANNEL_INFO_64,
	WMI_SERVICE_EXT_RES_CFG_SUPPORT,
	WMI_SERVICE_MESH_11S,
	WMI_SERVICE_MESH_NON_11S,
	WMI_SERVICE_PEER_STATS,
	WMI_SERVICE_RESTRT_CHNL_SUPPORT,
	WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
	WMI_SERVICE_TX_MODE_PUSH_ONLY,
	WMI_SERVICE_TX_MODE_PUSH_PULL,
	WMI_SERVICE_TX_MODE_DYNAMIC,

	/* keep last */
	WMI_SERVICE_MAX,
};

enum wmi_10x_service {
	WMI_10X_SERVICE_BEACON_OFFLOAD = 0,
	WMI_10X_SERVICE_SCAN_OFFLOAD,
	WMI_10X_SERVICE_ROAM_OFFLOAD,
	WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
	WMI_10X_SERVICE_STA_PWRSAVE,
	WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
	WMI_10X_SERVICE_AP_UAPSD,
	WMI_10X_SERVICE_AP_DFS,
	WMI_10X_SERVICE_11AC,
	WMI_10X_SERVICE_BLOCKACK,
	WMI_10X_SERVICE_PHYERR,
	WMI_10X_SERVICE_BCN_FILTER,
	WMI_10X_SERVICE_RTT,
	WMI_10X_SERVICE_RATECTRL,
	WMI_10X_SERVICE_WOW,
	WMI_10X_SERVICE_RATECTRL_CACHE,
	WMI_10X_SERVICE_IRAM_TIDS,
	WMI_10X_SERVICE_BURST,

	/* introduced in 10.2 */
	WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
	WMI_10X_SERVICE_FORCE_FW_HANG,
	WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
	WMI_10X_SERVICE_ATF,
	WMI_10X_SERVICE_COEX_GPIO,
	WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
	WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
	WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
	WMI_10X_SERVICE_MESH,
	WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
	WMI_10X_SERVICE_PEER_STATS,
};

enum wmi_main_service {
	WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,
	WMI_MAIN_SERVICE_SCAN_OFFLOAD,
	WMI_MAIN_SERVICE_ROAM_OFFLOAD,
	WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
	WMI_MAIN_SERVICE_STA_PWRSAVE,
	WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
	WMI_MAIN_SERVICE_AP_UAPSD,
	WMI_MAIN_SERVICE_AP_DFS,
	WMI_MAIN_SERVICE_11AC,
	WMI_MAIN_SERVICE_BLOCKACK,
	WMI_MAIN_SERVICE_PHYERR,
	WMI_MAIN_SERVICE_BCN_FILTER,
	WMI_MAIN_SERVICE_RTT,
	WMI_MAIN_SERVICE_RATECTRL,
	WMI_MAIN_SERVICE_WOW,
	WMI_MAIN_SERVICE_RATECTRL_CACHE,
	WMI_MAIN_SERVICE_IRAM_TIDS,
	WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
	WMI_MAIN_SERVICE_NLO,
	WMI_MAIN_SERVICE_GTK_OFFLOAD,
	WMI_MAIN_SERVICE_SCAN_SCH,
	WMI_MAIN_SERVICE_CSA_OFFLOAD,
	WMI_MAIN_SERVICE_CHATTER,
	WMI_MAIN_SERVICE_COEX_FREQAVOID,
	WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
	WMI_MAIN_SERVICE_FORCE_FW_HANG,
	WMI_MAIN_SERVICE_GPIO,
	WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
	WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
	WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
	WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
	WMI_MAIN_SERVICE_TX_ENCAP,
};

enum wmi_10_4_service {
	WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,
	WMI_10_4_SERVICE_SCAN_OFFLOAD,
	WMI_10_4_SERVICE_ROAM_OFFLOAD,
	WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
	WMI_10_4_SERVICE_STA_PWRSAVE,
	WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
	WMI_10_4_SERVICE_AP_UAPSD,
	WMI_10_4_SERVICE_AP_DFS,
	WMI_10_4_SERVICE_11AC,
	WMI_10_4_SERVICE_BLOCKACK,
	WMI_10_4_SERVICE_PHYERR,
	WMI_10_4_SERVICE_BCN_FILTER,
	WMI_10_4_SERVICE_RTT,
	WMI_10_4_SERVICE_RATECTRL,
	WMI_10_4_SERVICE_WOW,
	WMI_10_4_SERVICE_RATECTRL_CACHE,
	WMI_10_4_SERVICE_IRAM_TIDS,
	WMI_10_4_SERVICE_BURST,
	WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
	WMI_10_4_SERVICE_GTK_OFFLOAD,
	WMI_10_4_SERVICE_SCAN_SCH,
	WMI_10_4_SERVICE_CSA_OFFLOAD,
	WMI_10_4_SERVICE_CHATTER,
	WMI_10_4_SERVICE_COEX_FREQAVOID,
	WMI_10_4_SERVICE_PACKET_POWER_SAVE,
	WMI_10_4_SERVICE_FORCE_FW_HANG,
	WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
	WMI_10_4_SERVICE_GPIO,
	WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
	WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
	WMI_10_4_SERVICE_STA_KEEP_ALIVE,
	WMI_10_4_SERVICE_TX_ENCAP,
	WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
	WMI_10_4_SERVICE_EARLY_RX,
	WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
	WMI_10_4_SERVICE_TT,
	WMI_10_4_SERVICE_ATF,
	WMI_10_4_SERVICE_PEER_CACHING,
	WMI_10_4_SERVICE_COEX_GPIO,
	WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
	WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
	WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
	WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
	WMI_10_4_SERVICE_MESH_NON_11S,
	WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
	WMI_10_4_SERVICE_PEER_STATS,
	WMI_10_4_SERVICE_MESH_11S,
	WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
	WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
	WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
	WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
};

static inline char *wmi_service_name(int service_id)
{
#define SVCSTR(x) case x: return #x

	switch (service_id) {
	SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);
	SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);
	SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);
	SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);
	SVCSTR(WMI_SERVICE_STA_PWRSAVE);
	SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);
	SVCSTR(WMI_SERVICE_AP_UAPSD);
	SVCSTR(WMI_SERVICE_AP_DFS);
	SVCSTR(WMI_SERVICE_11AC);
	SVCSTR(WMI_SERVICE_BLOCKACK);
	SVCSTR(WMI_SERVICE_PHYERR);
	SVCSTR(WMI_SERVICE_BCN_FILTER);
	SVCSTR(WMI_SERVICE_RTT);
	SVCSTR(WMI_SERVICE_RATECTRL);
	SVCSTR(WMI_SERVICE_WOW);
	SVCSTR(WMI_SERVICE_RATECTRL_CACHE);
	SVCSTR(WMI_SERVICE_IRAM_TIDS);
	SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);
	SVCSTR(WMI_SERVICE_NLO);
	SVCSTR(WMI_SERVICE_GTK_OFFLOAD);
	SVCSTR(WMI_SERVICE_SCAN_SCH);
	SVCSTR(WMI_SERVICE_CSA_OFFLOAD);
	SVCSTR(WMI_SERVICE_CHATTER);
	SVCSTR(WMI_SERVICE_COEX_FREQAVOID);
	SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);
	SVCSTR(WMI_SERVICE_FORCE_FW_HANG);
	SVCSTR(WMI_SERVICE_GPIO);
	SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);
	SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);
	SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);
	SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);
	SVCSTR(WMI_SERVICE_TX_ENCAP);
	SVCSTR(WMI_SERVICE_BURST);
	SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
	SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
	SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
	SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
	SVCSTR(WMI_SERVICE_EARLY_RX);
	SVCSTR(WMI_SERVICE_STA_SMPS);
	SVCSTR(WMI_SERVICE_FWTEST);
	SVCSTR(WMI_SERVICE_STA_WMMAC);
	SVCSTR(WMI_SERVICE_TDLS);
	SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
	SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
	SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
	SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
	SVCSTR(WMI_SERVICE_WLAN_HB);
	SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
	SVCSTR(WMI_SERVICE_BATCH_SCAN);
	SVCSTR(WMI_SERVICE_QPOWER);
	SVCSTR(WMI_SERVICE_PLMREQ);
	SVCSTR(WMI_SERVICE_THERMAL_MGMT);
	SVCSTR(WMI_SERVICE_RMC);
	SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
	SVCSTR(WMI_SERVICE_COEX_SAR);
	SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
	SVCSTR(WMI_SERVICE_NAN);
	SVCSTR(WMI_SERVICE_L1SS_STAT);
	SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
	SVCSTR(WMI_SERVICE_OBSS_SCAN);
	SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
	SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
	SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
	SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
	SVCSTR(WMI_SERVICE_LPASS);
	SVCSTR(WMI_SERVICE_EXTSCAN);
	SVCSTR(WMI_SERVICE_D0WOW);
	SVCSTR(WMI_SERVICE_HSOFFLOAD);
	SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
	SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
	SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
	SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
	SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
	SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
	SVCSTR(WMI_SERVICE_ATF);
	SVCSTR(WMI_SERVICE_COEX_GPIO);
	SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);
	SVCSTR(WMI_SERVICE_TT);
	SVCSTR(WMI_SERVICE_PEER_CACHING);
	SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);
	SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
	SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
	SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
	SVCSTR(WMI_SERVICE_MESH_11S);
	SVCSTR(WMI_SERVICE_MESH_NON_11S);
	SVCSTR(WMI_SERVICE_PEER_STATS);
	SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
	SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT);
	SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);
	SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);
	SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);
	default:
		return NULL;
	}

#undef SVCSTR
}

#define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
	((svc_id) < (len) && \
	 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \
	 BIT((svc_id) % (sizeof(u32))))

#define SVCMAP(x, y, len) \
	do { \
		if (WMI_SERVICE_IS_ENABLED((in), (x), (len))) \
			__set_bit(y, out); \
	} while (0)

static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
				   size_t len)
{
	SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,
	       WMI_SERVICE_BEACON_OFFLOAD, len);
	SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,
	       WMI_SERVICE_SCAN_OFFLOAD, len);
	SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,
	       WMI_SERVICE_ROAM_OFFLOAD, len);
	SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
	       WMI_SERVICE_BCN_MISS_OFFLOAD, len);
	SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,
	       WMI_SERVICE_STA_PWRSAVE, len);
	SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
	       WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
	SVCMAP(WMI_10X_SERVICE_AP_UAPSD,
	       WMI_SERVICE_AP_UAPSD, len);
	SVCMAP(WMI_10X_SERVICE_AP_DFS,
	       WMI_SERVICE_AP_DFS, len);
	SVCMAP(WMI_10X_SERVICE_11AC,
	       WMI_SERVICE_11AC, len);
	SVCMAP(WMI_10X_SERVICE_BLOCKACK,
	       WMI_SERVICE_BLOCKACK, len);
	SVCMAP(WMI_10X_SERVICE_PHYERR,
	       WMI_SERVICE_PHYERR, len);
	SVCMAP(WMI_10X_SERVICE_BCN_FILTER,
	       WMI_SERVICE_BCN_FILTER, len);
	SVCMAP(WMI_10X_SERVICE_RTT,
	       WMI_SERVICE_RTT, len);
	SVCMAP(WMI_10X_SERVICE_RATECTRL,
	       WMI_SERVICE_RATECTRL, len);
	SVCMAP(WMI_10X_SERVICE_WOW,
	       WMI_SERVICE_WOW, len);
	SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,
	       WMI_SERVICE_RATECTRL_CACHE, len);
	SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,
	       WMI_SERVICE_IRAM_TIDS, len);
	SVCMAP(WMI_10X_SERVICE_BURST,
	       WMI_SERVICE_BURST, len);
	SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
	       WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
	SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,
	       WMI_SERVICE_FORCE_FW_HANG, len);
	SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
	       WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
	SVCMAP(WMI_10X_SERVICE_ATF,
	       WMI_SERVICE_ATF, len);
	SVCMAP(WMI_10X_SERVICE_COEX_GPIO,
	       WMI_SERVICE_COEX_GPIO, len);
	SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
	       WMI_SERVICE_AUX_SPECTRAL_INTF, len);
	SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
	       WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
	SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
	       WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
	SVCMAP(WMI_10X_SERVICE_MESH,
	       WMI_SERVICE_MESH_11S, len);
	SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
	       WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
	SVCMAP(WMI_10X_SERVICE_PEER_STATS,
	       WMI_SERVICE_PEER_STATS, len);
}

static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
				    size_t len)
{
	SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,
	       WMI_SERVICE_BEACON_OFFLOAD, len);
	SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,
	       WMI_SERVICE_SCAN_OFFLOAD, len);
	SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,
	       WMI_SERVICE_ROAM_OFFLOAD, len);
	SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
	       WMI_SERVICE_BCN_MISS_OFFLOAD, len);
	SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,
	       WMI_SERVICE_STA_PWRSAVE, len);
	SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
	       WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
	SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,
	       WMI_SERVICE_AP_UAPSD, len);
	SVCMAP(WMI_MAIN_SERVICE_AP_DFS,
	       WMI_SERVICE_AP_DFS, len);
	SVCMAP(WMI_MAIN_SERVICE_11AC,
	       WMI_SERVICE_11AC, len);
	SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,
	       WMI_SERVICE_BLOCKACK, len);
	SVCMAP(WMI_MAIN_SERVICE_PHYERR,
	       WMI_SERVICE_PHYERR, len);
	SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,
	       WMI_SERVICE_BCN_FILTER, len);
	SVCMAP(WMI_MAIN_SERVICE_RTT,
	       WMI_SERVICE_RTT, len);
	SVCMAP(WMI_MAIN_SERVICE_RATECTRL,
	       WMI_SERVICE_RATECTRL, len);
	SVCMAP(WMI_MAIN_SERVICE_WOW,
	       WMI_SERVICE_WOW, len);
	SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,
	       WMI_SERVICE_RATECTRL_CACHE, len);
	SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,
	       WMI_SERVICE_IRAM_TIDS, len);
	SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
	       WMI_SERVICE_ARPNS_OFFLOAD, len);
	SVCMAP(WMI_MAIN_SERVICE_NLO,
	       WMI_SERVICE_NLO, len);
	SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,
	       WMI_SERVICE_GTK_OFFLOAD, len);
	SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,
	       WMI_SERVICE_SCAN_SCH, len);
	SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,
	       WMI_SERVICE_CSA_OFFLOAD, len);
	SVCMAP(WMI_MAIN_SERVICE_CHATTER,
	       WMI_SERVICE_CHATTER, len);
	SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,
	       WMI_SERVICE_COEX_FREQAVOID, len);
	SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
	       WMI_SERVICE_PACKET_POWER_SAVE, len);
	SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,
	       WMI_SERVICE_FORCE_FW_HANG, len);
	SVCMAP(WMI_MAIN_SERVICE_GPIO,
	       WMI_SERVICE_GPIO, len);
	SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
	       WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);
	SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
	       WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
	SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
	       WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
	SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
	       WMI_SERVICE_STA_KEEP_ALIVE, len);
	SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,
	       WMI_SERVICE_TX_ENCAP, len);
}

static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
				    size_t len)
{
	SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,
	       WMI_SERVICE_BEACON_OFFLOAD, len);
	SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,
	       WMI_SERVICE_SCAN_OFFLOAD, len);
	SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,
	       WMI_SERVICE_ROAM_OFFLOAD, len);
	SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
	       WMI_SERVICE_BCN_MISS_OFFLOAD, len);
	SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,
	       WMI_SERVICE_STA_PWRSAVE, len);
	SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
	       WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
	SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,
	       WMI_SERVICE_AP_UAPSD, len);
	SVCMAP(WMI_10_4_SERVICE_AP_DFS,
	       WMI_SERVICE_AP_DFS, len);
	SVCMAP(WMI_10_4_SERVICE_11AC,
	       WMI_SERVICE_11AC, len);
	SVCMAP(WMI_10_4_SERVICE_BLOCKACK,
	       WMI_SERVICE_BLOCKACK, len);
	SVCMAP(WMI_10_4_SERVICE_PHYERR,
	       WMI_SERVICE_PHYERR, len);
	SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,
	       WMI_SERVICE_BCN_FILTER, len);
	SVCMAP(WMI_10_4_SERVICE_RTT,
	       WMI_SERVICE_RTT, len);
	SVCMAP(WMI_10_4_SERVICE_RATECTRL,
	       WMI_SERVICE_RATECTRL, len);
	SVCMAP(WMI_10_4_SERVICE_WOW,
	       WMI_SERVICE_WOW, len);
	SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,
	       WMI_SERVICE_RATECTRL_CACHE, len);
	SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,
	       WMI_SERVICE_IRAM_TIDS, len);
	SVCMAP(WMI_10_4_SERVICE_BURST,
	       WMI_SERVICE_BURST, len);
	SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
	       WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
	SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,
	       WMI_SERVICE_GTK_OFFLOAD, len);
	SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,
	       WMI_SERVICE_SCAN_SCH, len);
	SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,
	       WMI_SERVICE_CSA_OFFLOAD, len);
	SVCMAP(WMI_10_4_SERVICE_CHATTER,
	       WMI_SERVICE_CHATTER, len);
	SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,
	       WMI_SERVICE_COEX_FREQAVOID, len);
	SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,
	       WMI_SERVICE_PACKET_POWER_SAVE, len);
	SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,
	       WMI_SERVICE_FORCE_FW_HANG, len);
	SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
	       WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
	SVCMAP(WMI_10_4_SERVICE_GPIO,
	       WMI_SERVICE_GPIO, len);
	SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
	       WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
	SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
	       WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
	SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,
	       WMI_SERVICE_STA_KEEP_ALIVE, len);
	SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,
	       WMI_SERVICE_TX_ENCAP, len);
	SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
	       WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);
	SVCMAP(WMI_10_4_SERVICE_EARLY_RX,
	       WMI_SERVICE_EARLY_RX, len);
	SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
	       WMI_SERVICE_ENHANCED_PROXY_STA, len);
	SVCMAP(WMI_10_4_SERVICE_TT,
	       WMI_SERVICE_TT, len);
	SVCMAP(WMI_10_4_SERVICE_ATF,
	       WMI_SERVICE_ATF, len);
	SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,
	       WMI_SERVICE_PEER_CACHING, len);
	SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,
	       WMI_SERVICE_COEX_GPIO, len);
	SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
	       WMI_SERVICE_AUX_SPECTRAL_INTF, len);
	SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
	       WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
	SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
	       WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
	SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
	       WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
	SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
	       WMI_SERVICE_MESH_NON_11S, len);
	SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
	       WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
	SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
	       WMI_SERVICE_PEER_STATS, len);
	SVCMAP(WMI_10_4_SERVICE_MESH_11S,
	       WMI_SERVICE_MESH_11S, len);
	SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
	       WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len);
	SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
	       WMI_SERVICE_TX_MODE_PUSH_ONLY, len);
	SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
	       WMI_SERVICE_TX_MODE_PUSH_PULL, len);
	SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
	       WMI_SERVICE_TX_MODE_DYNAMIC, len);
}

#undef SVCMAP

/* 2 word representation of MAC addr */
struct wmi_mac_addr {
	union {
		u8 addr[6];
		struct {
			u32 word0;
			u32 word1;
		} __packed;
	} __packed;
} __packed;

struct wmi_cmd_map {
	u32 init_cmdid;
	u32 start_scan_cmdid;
	u32 stop_scan_cmdid;
	u32 scan_chan_list_cmdid;
	u32 scan_sch_prio_tbl_cmdid;
	u32 pdev_set_regdomain_cmdid;
	u32 pdev_set_channel_cmdid;
	u32 pdev_set_param_cmdid;
	u32 pdev_pktlog_enable_cmdid;
	u32 pdev_pktlog_disable_cmdid;
	u32 pdev_set_wmm_params_cmdid;
	u32 pdev_set_ht_cap_ie_cmdid;
	u32 pdev_set_vht_cap_ie_cmdid;
	u32 pdev_set_dscp_tid_map_cmdid;
	u32 pdev_set_quiet_mode_cmdid;
	u32 pdev_green_ap_ps_enable_cmdid;
	u32 pdev_get_tpc_config_cmdid;
	u32 pdev_set_base_macaddr_cmdid;
	u32 vdev_create_cmdid;
	u32 vdev_delete_cmdid;
	u32 vdev_start_request_cmdid;
	u32 vdev_restart_request_cmdid;
	u32 vdev_up_cmdid;
	u32 vdev_stop_cmdid;
	u32 vdev_down_cmdid;
	u32 vdev_set_param_cmdid;
	u32 vdev_install_key_cmdid;
	u32 peer_create_cmdid;
	u32 peer_delete_cmdid;
	u32 peer_flush_tids_cmdid;
	u32 peer_set_param_cmdid;
	u32 peer_assoc_cmdid;
	u32 peer_add_wds_entry_cmdid;
	u32 peer_remove_wds_entry_cmdid;
	u32 peer_mcast_group_cmdid;
	u32 bcn_tx_cmdid;
	u32 pdev_send_bcn_cmdid;
	u32 bcn_tmpl_cmdid;
	u32 bcn_filter_rx_cmdid;
	u32 prb_req_filter_rx_cmdid;
	u32 mgmt_tx_cmdid;
	u32 prb_tmpl_cmdid;
	u32 addba_clear_resp_cmdid;
	u32 addba_send_cmdid;
	u32 addba_status_cmdid;
	u32 delba_send_cmdid;
	u32 addba_set_resp_cmdid;
	u32 send_singleamsdu_cmdid;
	u32 sta_powersave_mode_cmdid;
	u32 sta_powersave_param_cmdid;
	u32 sta_mimo_ps_mode_cmdid;
	u32 pdev_dfs_enable_cmdid;
	u32 pdev_dfs_disable_cmdid;
	u32 roam_scan_mode;
	u32 roam_scan_rssi_threshold;
	u32 roam_scan_period;
	u32 roam_scan_rssi_change_threshold;
	u32 roam_ap_profile;
	u32 ofl_scan_add_ap_profile;
	u32 ofl_scan_remove_ap_profile;
	u32 ofl_scan_period;
	u32 p2p_dev_set_device_info;
	u32 p2p_dev_set_discoverability;
	u32 p2p_go_set_beacon_ie;
	u32 p2p_go_set_probe_resp_ie;
	u32 p2p_set_vendor_ie_data_cmdid;
	u32 ap_ps_peer_param_cmdid;
	u32 ap_ps_peer_uapsd_coex_cmdid;
	u32 peer_rate_retry_sched_cmdid;
	u32 wlan_profile_trigger_cmdid;
	u32 wlan_profile_set_hist_intvl_cmdid;
	u32 wlan_profile_get_profile_data_cmdid;
	u32 wlan_profile_enable_profile_id_cmdid;
	u32 wlan_profile_list_profile_id_cmdid;
	u32 pdev_suspend_cmdid;
	u32 pdev_resume_cmdid;
	u32 add_bcn_filter_cmdid;
	u32 rmv_bcn_filter_cmdid;
	u32 wow_add_wake_pattern_cmdid;
	u32 wow_del_wake_pattern_cmdid;
	u32 wow_enable_disable_wake_event_cmdid;
	u32 wow_enable_cmdid;
	u32 wow_hostwakeup_from_sleep_cmdid;
	u32 rtt_measreq_cmdid;
	u32 rtt_tsf_cmdid;
	u32 vdev_spectral_scan_configure_cmdid;
	u32 vdev_spectral_scan_enable_cmdid;
	u32 request_stats_cmdid;
	u32 set_arp_ns_offload_cmdid;
	u32 network_list_offload_config_cmdid;
	u32 gtk_offload_cmdid;
	u32 csa_offload_enable_cmdid;
	u32 csa_offload_chanswitch_cmdid;
	u32 chatter_set_mode_cmdid;
	u32 peer_tid_addba_cmdid;
	u32 peer_tid_delba_cmdid;
	u32 sta_dtim_ps_method_cmdid;
	u32 sta_uapsd_auto_trig_cmdid;
	u32 sta_keepalive_cmd;
	u32 echo_cmdid;
	u32 pdev_utf_cmdid;
	u32 dbglog_cfg_cmdid;
	u32 pdev_qvit_cmdid;
	u32 pdev_ftm_intg_cmdid;
	u32 vdev_set_keepalive_cmdid;
	u32 vdev_get_keepalive_cmdid;
	u32 force_fw_hang_cmdid;
	u32 gpio_config_cmdid;
	u32 gpio_output_cmdid;
	u32 pdev_get_temperature_cmdid;
	u32 vdev_set_wmm_params_cmdid;
	u32 tdls_set_state_cmdid;
	u32 tdls_peer_update_cmdid;
	u32 adaptive_qcs_cmdid;
	u32 scan_update_request_cmdid;
	u32 vdev_standby_response_cmdid;
	u32 vdev_resume_response_cmdid;
	u32 wlan_peer_caching_add_peer_cmdid;
	u32 wlan_peer_caching_evict_peer_cmdid;
	u32 wlan_peer_caching_restore_peer_cmdid;
	u32 wlan_peer_caching_print_all_peers_info_cmdid;
	u32 peer_update_wds_entry_cmdid;
	u32 peer_add_proxy_sta_entry_cmdid;
	u32 rtt_keepalive_cmdid;
	u32 oem_req_cmdid;
	u32 nan_cmdid;
	u32 vdev_ratemask_cmdid;
	u32 qboost_cfg_cmdid;
	u32 pdev_smart_ant_enable_cmdid;
	u32 pdev_smart_ant_set_rx_antenna_cmdid;
	u32 peer_smart_ant_set_tx_antenna_cmdid;
	u32 peer_smart_ant_set_train_info_cmdid;
	u32 peer_smart_ant_set_node_config_ops_cmdid;
	u32 pdev_set_antenna_switch_table_cmdid;
	u32 pdev_set_ctl_table_cmdid;
	u32 pdev_set_mimogain_table_cmdid;
	u32 pdev_ratepwr_table_cmdid;
	u32 pdev_ratepwr_chainmsk_table_cmdid;
	u32 pdev_fips_cmdid;
	u32 tt_set_conf_cmdid;
	u32 fwtest_cmdid;
	u32 vdev_atf_request_cmdid;
	u32 peer_atf_request_cmdid;
	u32 pdev_get_ani_cck_config_cmdid;
	u32 pdev_get_ani_ofdm_config_cmdid;
	u32 pdev_reserve_ast_entry_cmdid;
	u32 pdev_get_nfcal_power_cmdid;
	u32 pdev_get_tpc_cmdid;
	u32 pdev_get_ast_info_cmdid;
	u32 vdev_set_dscp_tid_map_cmdid;
	u32 pdev_get_info_cmdid;
	u32 vdev_get_info_cmdid;
	u32 vdev_filter_neighbor_rx_packets_cmdid;
	u32 mu_cal_start_cmdid;
	u32 set_cca_params_cmdid;
	u32 pdev_bss_chan_info_request_cmdid;
	u32 pdev_enable_adaptive_cca_cmdid;
	u32 ext_resource_cfg_cmdid;
};

/*
 * wmi command groups.
 */
enum wmi_cmd_group {
	/* 0 to 2 are reserved */
	WMI_GRP_START = 0x3,
	WMI_GRP_SCAN = WMI_GRP_START,
	WMI_GRP_PDEV,
	WMI_GRP_VDEV,
	WMI_GRP_PEER,
	WMI_GRP_MGMT,
	WMI_GRP_BA_NEG,
	WMI_GRP_STA_PS,
	WMI_GRP_DFS,
	WMI_GRP_ROAM,
	WMI_GRP_OFL_SCAN,
	WMI_GRP_P2P,
	WMI_GRP_AP_PS,
	WMI_GRP_RATE_CTRL,
	WMI_GRP_PROFILE,
	WMI_GRP_SUSPEND,
	WMI_GRP_BCN_FILTER,
	WMI_GRP_WOW,
	WMI_GRP_RTT,
	WMI_GRP_SPECTRAL,
	WMI_GRP_STATS,
	WMI_GRP_ARP_NS_OFL,
	WMI_GRP_NLO_OFL,
	WMI_GRP_GTK_OFL,
	WMI_GRP_CSA_OFL,
	WMI_GRP_CHATTER,
	WMI_GRP_TID_ADDBA,
	WMI_GRP_MISC,
	WMI_GRP_GPIO,
};

#define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
#define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)

#define WMI_CMD_UNSUPPORTED 0

/* Command IDs and command events for MAIN FW. */
enum wmi_cmd_id {
	WMI_INIT_CMDID = 0x1,

	/* Scan specific commands */
	WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
	WMI_STOP_SCAN_CMDID,
	WMI_SCAN_CHAN_LIST_CMDID,
	WMI_SCAN_SCH_PRIO_TBL_CMDID,

	/* PDEV (physical device) specific commands */
	WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
	WMI_PDEV_SET_CHANNEL_CMDID,
	WMI_PDEV_SET_PARAM_CMDID,
	WMI_PDEV_PKTLOG_ENABLE_CMDID,
	WMI_PDEV_PKTLOG_DISABLE_CMDID,
	WMI_PDEV_SET_WMM_PARAMS_CMDID,
	WMI_PDEV_SET_HT_CAP_IE_CMDID,
	WMI_PDEV_SET_VHT_CAP_IE_CMDID,
	WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
	WMI_PDEV_SET_QUIET_MODE_CMDID,
	WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
	WMI_PDEV_GET_TPC_CONFIG_CMDID,
	WMI_PDEV_SET_BASE_MACADDR_CMDID,

	/* VDEV (virtual device) specific commands */
	WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
	WMI_VDEV_DELETE_CMDID,
	WMI_VDEV_START_REQUEST_CMDID,
	WMI_VDEV_RESTART_REQUEST_CMDID,
	WMI_VDEV_UP_CMDID,
	WMI_VDEV_STOP_CMDID,
	WMI_VDEV_DOWN_CMDID,
	WMI_VDEV_SET_PARAM_CMDID,
	WMI_VDEV_INSTALL_KEY_CMDID,

	/* peer specific commands */
	WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
	WMI_PEER_DELETE_CMDID,
	WMI_PEER_FLUSH_TIDS_CMDID,
	WMI_PEER_SET_PARAM_CMDID,
	WMI_PEER_ASSOC_CMDID,
	WMI_PEER_ADD_WDS_ENTRY_CMDID,
	WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
	WMI_PEER_MCAST_GROUP_CMDID,

	/* beacon/management specific commands */
	WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
	WMI_PDEV_SEND_BCN_CMDID,
	WMI_BCN_TMPL_CMDID,
	WMI_BCN_FILTER_RX_CMDID,
	WMI_PRB_REQ_FILTER_RX_CMDID,
	WMI_MGMT_TX_CMDID,
	WMI_PRB_TMPL_CMDID,

	/* commands to directly control BA negotiation directly from host. */
	WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
	WMI_ADDBA_SEND_CMDID,
	WMI_ADDBA_STATUS_CMDID,
	WMI_DELBA_SEND_CMDID,
	WMI_ADDBA_SET_RESP_CMDID,
	WMI_SEND_SINGLEAMSDU_CMDID,

	/* Station power save specific config */
	WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
	WMI_STA_POWERSAVE_PARAM_CMDID,
	WMI_STA_MIMO_PS_MODE_CMDID,

	/** DFS-specific commands */
	WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
	WMI_PDEV_DFS_DISABLE_CMDID,

	/* Roaming specific  commands */
	WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
	WMI_ROAM_SCAN_RSSI_THRESHOLD,
	WMI_ROAM_SCAN_PERIOD,
	WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
	WMI_ROAM_AP_PROFILE,

	/* offload scan specific commands */
	WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
	WMI_OFL_SCAN_REMOVE_AP_PROFILE,
	WMI_OFL_SCAN_PERIOD,

	/* P2P specific commands */
	WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
	WMI_P2P_DEV_SET_DISCOVERABILITY,
	WMI_P2P_GO_SET_BEACON_IE,
	WMI_P2P_GO_SET_PROBE_RESP_IE,
	WMI_P2P_SET_VENDOR_IE_DATA_CMDID,

	/* AP power save specific config */
	WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
	WMI_AP_PS_PEER_UAPSD_COEX_CMDID,

	/* Rate-control specific commands */
	WMI_PEER_RATE_RETRY_SCHED_CMDID =
	WMI_CMD_GRP(WMI_GRP_RATE_CTRL),

	/* WLAN Profiling commands. */
	WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
	WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
	WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
	WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
	WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,

	/* Suspend resume command Ids */
	WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
	WMI_PDEV_RESUME_CMDID,

	/* Beacon filter commands */
	WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
	WMI_RMV_BCN_FILTER_CMDID,

	/* WOW Specific WMI commands*/
	WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
	WMI_WOW_DEL_WAKE_PATTERN_CMDID,
	WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
	WMI_WOW_ENABLE_CMDID,
	WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,

	/* RTT measurement related cmd */
	WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
	WMI_RTT_TSF_CMDID,

	/* spectral scan commands */
	WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
	WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,

	/* F/W stats */
	WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),

	/* ARP OFFLOAD REQUEST*/
	WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),

	/* NS offload confid*/
	WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),

	/* GTK offload Specific WMI commands*/
	WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),

	/* CSA offload Specific WMI commands*/
	WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
	WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,

	/* Chatter commands*/
	WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),

	/* addba specific commands */
	WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
	WMI_PEER_TID_DELBA_CMDID,

	/* set station mimo powersave method */
	WMI_STA_DTIM_PS_METHOD_CMDID,
	/* Configure the Station UAPSD AC Auto Trigger Parameters */
	WMI_STA_UAPSD_AUTO_TRIG_CMDID,

	/* STA Keep alive parameter configuration,
	 * Requires WMI_SERVICE_STA_KEEP_ALIVE
	 */
	WMI_STA_KEEPALIVE_CMD,

	/* misc command group */
	WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
	WMI_PDEV_UTF_CMDID,
	WMI_DBGLOG_CFG_CMDID,
	WMI_PDEV_QVIT_CMDID,
	WMI_PDEV_FTM_INTG_CMDID,
	WMI_VDEV_SET_KEEPALIVE_CMDID,
	WMI_VDEV_GET_KEEPALIVE_CMDID,
	WMI_FORCE_FW_HANG_CMDID,

	/* GPIO Configuration */
	WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
	WMI_GPIO_OUTPUT_CMDID,
};

enum wmi_event_id {
	WMI_SERVICE_READY_EVENTID = 0x1,
	WMI_READY_EVENTID,

	/* Scan specific events */
	WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),

	/* PDEV specific events */
	WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
	WMI_CHAN_INFO_EVENTID,
	WMI_PHYERR_EVENTID,

	/* VDEV specific events */
	WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
	WMI_VDEV_STOPPED_EVENTID,
	WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,

	/* peer specific events */
	WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),

	/* beacon/mgmt specific events */
	WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
	WMI_HOST_SWBA_EVENTID,
	WMI_TBTTOFFSET_UPDATE_EVENTID,

	/* ADDBA Related WMI Events*/
	WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
	WMI_TX_ADDBA_COMPLETE_EVENTID,

	/* Roam event to trigger roaming on host */
	WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
	WMI_PROFILE_MATCH,

	/* WoW */
	WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),

	/* RTT */
	WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
	WMI_TSF_MEASUREMENT_REPORT_EVENTID,
	WMI_RTT_ERROR_REPORT_EVENTID,

	/* GTK offload */
	WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
	WMI_GTK_REKEY_FAIL_EVENTID,

	/* CSA IE received event */
	WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),

	/* Misc events */
	WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
	WMI_PDEV_UTF_EVENTID,
	WMI_DEBUG_MESG_EVENTID,
	WMI_UPDATE_STATS_EVENTID,
	WMI_DEBUG_PRINT_EVENTID,
	WMI_DCS_INTERFERENCE_EVENTID,
	WMI_PDEV_QVIT_EVENTID,
	WMI_WLAN_PROFILE_DATA_EVENTID,
	WMI_PDEV_FTM_INTG_EVENTID,
	WMI_WLAN_FREQ_AVOID_EVENTID,
	WMI_VDEV_GET_KEEPALIVE_EVENTID,

	/* GPIO Event */
	WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
};

/* Command IDs and command events for 10.X firmware */
enum wmi_10x_cmd_id {
	WMI_10X_START_CMDID = 0x9000,
	WMI_10X_END_CMDID = 0x9FFF,

	/* initialize the wlan sub system */
	WMI_10X_INIT_CMDID,

	/* Scan specific commands */

	WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
	WMI_10X_STOP_SCAN_CMDID,
	WMI_10X_SCAN_CHAN_LIST_CMDID,
	WMI_10X_ECHO_CMDID,

	/* PDEV(physical device) specific commands */
	WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
	WMI_10X_PDEV_SET_CHANNEL_CMDID,
	WMI_10X_PDEV_SET_PARAM_CMDID,
	WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
	WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
	WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
	WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
	WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
	WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
	WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
	WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
	WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
	WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,

	/* VDEV(virtual device) specific commands */
	WMI_10X_VDEV_CREATE_CMDID,
	WMI_10X_VDEV_DELETE_CMDID,
	WMI_10X_VDEV_START_REQUEST_CMDID,
	WMI_10X_VDEV_RESTART_REQUEST_CMDID,
	WMI_10X_VDEV_UP_CMDID,
	WMI_10X_VDEV_STOP_CMDID,
	WMI_10X_VDEV_DOWN_CMDID,
	WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
	WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
	WMI_10X_VDEV_SET_PARAM_CMDID,
	WMI_10X_VDEV_INSTALL_KEY_CMDID,

	/* peer specific commands */
	WMI_10X_PEER_CREATE_CMDID,
	WMI_10X_PEER_DELETE_CMDID,
	WMI_10X_PEER_FLUSH_TIDS_CMDID,
	WMI_10X_PEER_SET_PARAM_CMDID,
	WMI_10X_PEER_ASSOC_CMDID,
	WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
	WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
	WMI_10X_PEER_MCAST_GROUP_CMDID,

	/* beacon/management specific commands */

	WMI_10X_BCN_TX_CMDID,
	WMI_10X_BCN_PRB_TMPL_CMDID,
	WMI_10X_BCN_FILTER_RX_CMDID,
	WMI_10X_PRB_REQ_FILTER_RX_CMDID,
	WMI_10X_MGMT_TX_CMDID,

	/* commands to directly control ba negotiation directly from host. */
	WMI_10X_ADDBA_CLEAR_RESP_CMDID,
	WMI_10X_ADDBA_SEND_CMDID,
	WMI_10X_ADDBA_STATUS_CMDID,
	WMI_10X_DELBA_SEND_CMDID,
	WMI_10X_ADDBA_SET_RESP_CMDID,
	WMI_10X_SEND_SINGLEAMSDU_CMDID,

	/* Station power save specific config */
	WMI_10X_STA_POWERSAVE_MODE_CMDID,
	WMI_10X_STA_POWERSAVE_PARAM_CMDID,
	WMI_10X_STA_MIMO_PS_MODE_CMDID,

	/* set debug log config */
	WMI_10X_DBGLOG_CFG_CMDID,

	/* DFS-specific commands */
	WMI_10X_PDEV_DFS_ENABLE_CMDID,
	WMI_10X_PDEV_DFS_DISABLE_CMDID,

	/* QVIT specific command id */
	WMI_10X_PDEV_QVIT_CMDID,

	/* Offload Scan and Roaming related  commands */
	WMI_10X_ROAM_SCAN_MODE,
	WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
	WMI_10X_ROAM_SCAN_PERIOD,
	WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
	WMI_10X_ROAM_AP_PROFILE,
	WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
	WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
	WMI_10X_OFL_SCAN_PERIOD,

	/* P2P specific commands */
	WMI_10X_P2P_DEV_SET_DEVICE_INFO,
	WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
	WMI_10X_P2P_GO_SET_BEACON_IE,
	WMI_10X_P2P_GO_SET_PROBE_RESP_IE,

	/* AP power save specific config */
	WMI_10X_AP_PS_PEER_PARAM_CMDID,
	WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,

	/* Rate-control specific commands */
	WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,

	/* WLAN Profiling commands. */
	WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
	WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
	WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
	WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
	WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,

	/* Suspend resume command Ids */
	WMI_10X_PDEV_SUSPEND_CMDID,
	WMI_10X_PDEV_RESUME_CMDID,

	/* Beacon filter commands */
	WMI_10X_ADD_BCN_FILTER_CMDID,
	WMI_10X_RMV_BCN_FILTER_CMDID,

	/* WOW Specific WMI commands*/
	WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
	WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
	WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
	WMI_10X_WOW_ENABLE_CMDID,
	WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,

	/* RTT measurement related cmd */
	WMI_10X_RTT_MEASREQ_CMDID,
	WMI_10X_RTT_TSF_CMDID,

	/* transmit beacon by value */
	WMI_10X_PDEV_SEND_BCN_CMDID,

	/* F/W stats */
	WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
	WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
	WMI_10X_REQUEST_STATS_CMDID,

	/* GPIO Configuration */
	WMI_10X_GPIO_CONFIG_CMDID,
	WMI_10X_GPIO_OUTPUT_CMDID,

	WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
};

enum wmi_10x_event_id {
	WMI_10X_SERVICE_READY_EVENTID = 0x8000,
	WMI_10X_READY_EVENTID,
	WMI_10X_START_EVENTID = 0x9000,
	WMI_10X_END_EVENTID = 0x9FFF,

	/* Scan specific events */
	WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
	WMI_10X_ECHO_EVENTID,
	WMI_10X_DEBUG_MESG_EVENTID,
	WMI_10X_UPDATE_STATS_EVENTID,

	/* Instantaneous RSSI event */
	WMI_10X_INST_RSSI_STATS_EVENTID,

	/* VDEV specific events */
	WMI_10X_VDEV_START_RESP_EVENTID,
	WMI_10X_VDEV_STANDBY_REQ_EVENTID,
	WMI_10X_VDEV_RESUME_REQ_EVENTID,
	WMI_10X_VDEV_STOPPED_EVENTID,

	/* peer  specific events */
	WMI_10X_PEER_STA_KICKOUT_EVENTID,

	/* beacon/mgmt specific events */
	WMI_10X_HOST_SWBA_EVENTID,
	WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
	WMI_10X_MGMT_RX_EVENTID,

	/* Channel stats event */
	WMI_10X_CHAN_INFO_EVENTID,

	/* PHY Error specific WMI event */
	WMI_10X_PHYERR_EVENTID,

	/* Roam event to trigger roaming on host */
	WMI_10X_ROAM_EVENTID,

	/* matching AP found from list of profiles */
	WMI_10X_PROFILE_MATCH,

	/* debug print message used for tracing FW code while debugging */
	WMI_10X_DEBUG_PRINT_EVENTID,
	/* VI spoecific event */
	WMI_10X_PDEV_QVIT_EVENTID,
	/* FW code profile data in response to profile request */
	WMI_10X_WLAN_PROFILE_DATA_EVENTID,

	/*RTT related event ID*/
	WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
	WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
	WMI_10X_RTT_ERROR_REPORT_EVENTID,

	WMI_10X_WOW_WAKEUP_HOST_EVENTID,
	WMI_10X_DCS_INTERFERENCE_EVENTID,

	/* TPC config for the current operating channel */
	WMI_10X_PDEV_TPC_CONFIG_EVENTID,

	WMI_10X_GPIO_INPUT_EVENTID,
	WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1,
};

enum wmi_10_2_cmd_id {
	WMI_10_2_START_CMDID = 0x9000,
	WMI_10_2_END_CMDID = 0x9FFF,
	WMI_10_2_INIT_CMDID,
	WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,
	WMI_10_2_STOP_SCAN_CMDID,
	WMI_10_2_SCAN_CHAN_LIST_CMDID,
	WMI_10_2_ECHO_CMDID,
	WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
	WMI_10_2_PDEV_SET_CHANNEL_CMDID,
	WMI_10_2_PDEV_SET_PARAM_CMDID,
	WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
	WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
	WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
	WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
	WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
	WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
	WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
	WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
	WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
	WMI_10_2_VDEV_CREATE_CMDID,
	WMI_10_2_VDEV_DELETE_CMDID,
	WMI_10_2_VDEV_START_REQUEST_CMDID,
	WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
	WMI_10_2_VDEV_UP_CMDID,
	WMI_10_2_VDEV_STOP_CMDID,
	WMI_10_2_VDEV_DOWN_CMDID,
	WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
	WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
	WMI_10_2_VDEV_SET_PARAM_CMDID,
	WMI_10_2_VDEV_INSTALL_KEY_CMDID,
	WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
	WMI_10_2_PEER_CREATE_CMDID,
	WMI_10_2_PEER_DELETE_CMDID,
	WMI_10_2_PEER_FLUSH_TIDS_CMDID,
	WMI_10_2_PEER_SET_PARAM_CMDID,
	WMI_10_2_PEER_ASSOC_CMDID,
	WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
	WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
	WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
	WMI_10_2_PEER_MCAST_GROUP_CMDID,
	WMI_10_2_BCN_TX_CMDID,
	WMI_10_2_BCN_PRB_TMPL_CMDID,
	WMI_10_2_BCN_FILTER_RX_CMDID,
	WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
	WMI_10_2_MGMT_TX_CMDID,
	WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
	WMI_10_2_ADDBA_SEND_CMDID,
	WMI_10_2_ADDBA_STATUS_CMDID,
	WMI_10_2_DELBA_SEND_CMDID,
	WMI_10_2_ADDBA_SET_RESP_CMDID,
	WMI_10_2_SEND_SINGLEAMSDU_CMDID,
	WMI_10_2_STA_POWERSAVE_MODE_CMDID,
	WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
	WMI_10_2_STA_MIMO_PS_MODE_CMDID,
	WMI_10_2_DBGLOG_CFG_CMDID,
	WMI_10_2_PDEV_DFS_ENABLE_CMDID,
	WMI_10_2_PDEV_DFS_DISABLE_CMDID,
	WMI_10_2_PDEV_QVIT_CMDID,
	WMI_10_2_ROAM_SCAN_MODE,
	WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
	WMI_10_2_ROAM_SCAN_PERIOD,
	WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
	WMI_10_2_ROAM_AP_PROFILE,
	WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
	WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
	WMI_10_2_OFL_SCAN_PERIOD,
	WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
	WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
	WMI_10_2_P2P_GO_SET_BEACON_IE,
	WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
	WMI_10_2_AP_PS_PEER_PARAM_CMDID,
	WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
	WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
	WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
	WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
	WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
	WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
	WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
	WMI_10_2_PDEV_SUSPEND_CMDID,
	WMI_10_2_PDEV_RESUME_CMDID,
	WMI_10_2_ADD_BCN_FILTER_CMDID,
	WMI_10_2_RMV_BCN_FILTER_CMDID,
	WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
	WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
	WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
	WMI_10_2_WOW_ENABLE_CMDID,
	WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
	WMI_10_2_RTT_MEASREQ_CMDID,
	WMI_10_2_RTT_TSF_CMDID,
	WMI_10_2_RTT_KEEPALIVE_CMDID,
	WMI_10_2_PDEV_SEND_BCN_CMDID,
	WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
	WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
	WMI_10_2_REQUEST_STATS_CMDID,
	WMI_10_2_GPIO_CONFIG_CMDID,
	WMI_10_2_GPIO_OUTPUT_CMDID,
	WMI_10_2_VDEV_RATEMASK_CMDID,
	WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
	WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
	WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
	WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
	WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
	WMI_10_2_FORCE_FW_HANG_CMDID,
	WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
	WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
	WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
	WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
	WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
	WMI_10_2_PDEV_GET_INFO,
	WMI_10_2_VDEV_GET_INFO,
	WMI_10_2_VDEV_ATF_REQUEST_CMDID,
	WMI_10_2_PEER_ATF_REQUEST_CMDID,
	WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
	WMI_10_2_MU_CAL_START_CMDID,
	WMI_10_2_SET_LTEU_CONFIG_CMDID,
	WMI_10_2_SET_CCA_PARAMS,
	WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
	WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
};

enum wmi_10_2_event_id {
	WMI_10_2_SERVICE_READY_EVENTID = 0x8000,
	WMI_10_2_READY_EVENTID,
	WMI_10_2_DEBUG_MESG_EVENTID,
	WMI_10_2_START_EVENTID = 0x9000,
	WMI_10_2_END_EVENTID = 0x9FFF,
	WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,
	WMI_10_2_ECHO_EVENTID,
	WMI_10_2_UPDATE_STATS_EVENTID,
	WMI_10_2_INST_RSSI_STATS_EVENTID,
	WMI_10_2_VDEV_START_RESP_EVENTID,
	WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
	WMI_10_2_VDEV_RESUME_REQ_EVENTID,
	WMI_10_2_VDEV_STOPPED_EVENTID,
	WMI_10_2_PEER_STA_KICKOUT_EVENTID,
	WMI_10_2_HOST_SWBA_EVENTID,
	WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
	WMI_10_2_MGMT_RX_EVENTID,
	WMI_10_2_CHAN_INFO_EVENTID,
	WMI_10_2_PHYERR_EVENTID,
	WMI_10_2_ROAM_EVENTID,
	WMI_10_2_PROFILE_MATCH,
	WMI_10_2_DEBUG_PRINT_EVENTID,
	WMI_10_2_PDEV_QVIT_EVENTID,
	WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
	WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
	WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
	WMI_10_2_RTT_ERROR_REPORT_EVENTID,
	WMI_10_2_RTT_KEEPALIVE_EVENTID,
	WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
	WMI_10_2_DCS_INTERFERENCE_EVENTID,
	WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
	WMI_10_2_GPIO_INPUT_EVENTID,
	WMI_10_2_PEER_RATECODE_LIST_EVENTID,
	WMI_10_2_GENERIC_BUFFER_EVENTID,
	WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
	WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
	WMI_10_2_WDS_PEER_EVENTID,
	WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
	WMI_10_2_PDEV_TEMPERATURE_EVENTID,
	WMI_10_2_MU_REPORT_EVENTID,
	WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID,
	WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
};

enum wmi_10_4_cmd_id {
	WMI_10_4_START_CMDID = 0x9000,
	WMI_10_4_END_CMDID = 0x9FFF,
	WMI_10_4_INIT_CMDID,
	WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,
	WMI_10_4_STOP_SCAN_CMDID,
	WMI_10_4_SCAN_CHAN_LIST_CMDID,
	WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
	WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
	WMI_10_4_ECHO_CMDID,
	WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
	WMI_10_4_PDEV_SET_CHANNEL_CMDID,
	WMI_10_4_PDEV_SET_PARAM_CMDID,
	WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
	WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
	WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
	WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
	WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
	WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
	WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
	WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
	WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
	WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
	WMI_10_4_VDEV_CREATE_CMDID,
	WMI_10_4_VDEV_DELETE_CMDID,
	WMI_10_4_VDEV_START_REQUEST_CMDID,
	WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
	WMI_10_4_VDEV_UP_CMDID,
	WMI_10_4_VDEV_STOP_CMDID,
	WMI_10_4_VDEV_DOWN_CMDID,
	WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
	WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
	WMI_10_4_VDEV_SET_PARAM_CMDID,
	WMI_10_4_VDEV_INSTALL_KEY_CMDID,
	WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
	WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
	WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
	WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
	WMI_10_4_PEER_CREATE_CMDID,
	WMI_10_4_PEER_DELETE_CMDID,
	WMI_10_4_PEER_FLUSH_TIDS_CMDID,
	WMI_10_4_PEER_SET_PARAM_CMDID,
	WMI_10_4_PEER_ASSOC_CMDID,
	WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
	WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
	WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
	WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
	WMI_10_4_PEER_MCAST_GROUP_CMDID,
	WMI_10_4_BCN_TX_CMDID,
	WMI_10_4_PDEV_SEND_BCN_CMDID,
	WMI_10_4_BCN_PRB_TMPL_CMDID,
	WMI_10_4_BCN_FILTER_RX_CMDID,
	WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
	WMI_10_4_MGMT_TX_CMDID,
	WMI_10_4_PRB_TMPL_CMDID,
	WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
	WMI_10_4_ADDBA_SEND_CMDID,
	WMI_10_4_ADDBA_STATUS_CMDID,
	WMI_10_4_DELBA_SEND_CMDID,
	WMI_10_4_ADDBA_SET_RESP_CMDID,
	WMI_10_4_SEND_SINGLEAMSDU_CMDID,
	WMI_10_4_STA_POWERSAVE_MODE_CMDID,
	WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
	WMI_10_4_STA_MIMO_PS_MODE_CMDID,
	WMI_10_4_DBGLOG_CFG_CMDID,
	WMI_10_4_PDEV_DFS_ENABLE_CMDID,
	WMI_10_4_PDEV_DFS_DISABLE_CMDID,
	WMI_10_4_PDEV_QVIT_CMDID,
	WMI_10_4_ROAM_SCAN_MODE,
	WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
	WMI_10_4_ROAM_SCAN_PERIOD,
	WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
	WMI_10_4_ROAM_AP_PROFILE,
	WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
	WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
	WMI_10_4_OFL_SCAN_PERIOD,
	WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
	WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
	WMI_10_4_P2P_GO_SET_BEACON_IE,
	WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
	WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
	WMI_10_4_AP_PS_PEER_PARAM_CMDID,
	WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
	WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
	WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
	WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
	WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
	WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
	WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
	WMI_10_4_PDEV_SUSPEND_CMDID,
	WMI_10_4_PDEV_RESUME_CMDID,
	WMI_10_4_ADD_BCN_FILTER_CMDID,
	WMI_10_4_RMV_BCN_FILTER_CMDID,
	WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
	WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
	WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
	WMI_10_4_WOW_ENABLE_CMDID,
	WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
	WMI_10_4_RTT_MEASREQ_CMDID,
	WMI_10_4_RTT_TSF_CMDID,
	WMI_10_4_RTT_KEEPALIVE_CMDID,
	WMI_10_4_OEM_REQ_CMDID,
	WMI_10_4_NAN_CMDID,
	WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
	WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
	WMI_10_4_REQUEST_STATS_CMDID,
	WMI_10_4_GPIO_CONFIG_CMDID,
	WMI_10_4_GPIO_OUTPUT_CMDID,
	WMI_10_4_VDEV_RATEMASK_CMDID,
	WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
	WMI_10_4_GTK_OFFLOAD_CMDID,
	WMI_10_4_QBOOST_CFG_CMDID,
	WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
	WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
	WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
	WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
	WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
	WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
	WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
	WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
	WMI_10_4_FORCE_FW_HANG_CMDID,
	WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
	WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
	WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
	WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
	WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
	WMI_10_4_PDEV_FIPS_CMDID,
	WMI_10_4_TT_SET_CONF_CMDID,
	WMI_10_4_FWTEST_CMDID,
	WMI_10_4_VDEV_ATF_REQUEST_CMDID,
	WMI_10_4_PEER_ATF_REQUEST_CMDID,
	WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
	WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
	WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
	WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
	WMI_10_4_PDEV_GET_TPC_CMDID,
	WMI_10_4_PDEV_GET_AST_INFO_CMDID,
	WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
	WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
	WMI_10_4_PDEV_GET_INFO_CMDID,
	WMI_10_4_VDEV_GET_INFO_CMDID,
	WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
	WMI_10_4_MU_CAL_START_CMDID,
	WMI_10_4_SET_CCA_PARAMS_CMDID,
	WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
	WMI_10_4_EXT_RESOURCE_CFG_CMDID,
	WMI_10_4_VDEV_SET_IE_CMDID,
	WMI_10_4_SET_LTEU_CONFIG_CMDID,
	WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
};

enum wmi_10_4_event_id {
	WMI_10_4_SERVICE_READY_EVENTID = 0x8000,
	WMI_10_4_READY_EVENTID,
	WMI_10_4_DEBUG_MESG_EVENTID,
	WMI_10_4_START_EVENTID = 0x9000,
	WMI_10_4_END_EVENTID = 0x9FFF,
	WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,
	WMI_10_4_ECHO_EVENTID,
	WMI_10_4_UPDATE_STATS_EVENTID,
	WMI_10_4_INST_RSSI_STATS_EVENTID,
	WMI_10_4_VDEV_START_RESP_EVENTID,
	WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
	WMI_10_4_VDEV_RESUME_REQ_EVENTID,
	WMI_10_4_VDEV_STOPPED_EVENTID,
	WMI_10_4_PEER_STA_KICKOUT_EVENTID,
	WMI_10_4_HOST_SWBA_EVENTID,
	WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
	WMI_10_4_MGMT_RX_EVENTID,
	WMI_10_4_CHAN_INFO_EVENTID,
	WMI_10_4_PHYERR_EVENTID,
	WMI_10_4_ROAM_EVENTID,
	WMI_10_4_PROFILE_MATCH,
	WMI_10_4_DEBUG_PRINT_EVENTID,
	WMI_10_4_PDEV_QVIT_EVENTID,
	WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
	WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
	WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
	WMI_10_4_RTT_ERROR_REPORT_EVENTID,
	WMI_10_4_RTT_KEEPALIVE_EVENTID,
	WMI_10_4_OEM_CAPABILITY_EVENTID,
	WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
	WMI_10_4_OEM_ERROR_REPORT_EVENTID,
	WMI_10_4_NAN_EVENTID,
	WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
	WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
	WMI_10_4_GTK_REKEY_FAIL_EVENTID,
	WMI_10_4_DCS_INTERFERENCE_EVENTID,
	WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
	WMI_10_4_CSA_HANDLING_EVENTID,
	WMI_10_4_GPIO_INPUT_EVENTID,
	WMI_10_4_PEER_RATECODE_LIST_EVENTID,
	WMI_10_4_GENERIC_BUFFER_EVENTID,
	WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
	WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
	WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
	WMI_10_4_WDS_PEER_EVENTID,
	WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
	WMI_10_4_PDEV_FIPS_EVENTID,
	WMI_10_4_TT_STATS_EVENTID,
	WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
	WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
	WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
	WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
	WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
	WMI_10_4_PDEV_TPC_EVENTID,
	WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
	WMI_10_4_PDEV_TEMPERATURE_EVENTID,
	WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
	WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
	WMI_10_4_MU_REPORT_EVENTID,
	WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,
};

enum wmi_phy_mode {
	MODE_11A        = 0,   /* 11a Mode */
	MODE_11G        = 1,   /* 11b/g Mode */
	MODE_11B        = 2,   /* 11b Mode */
	MODE_11GONLY    = 3,   /* 11g only Mode */
	MODE_11NA_HT20   = 4,  /* 11a HT20 mode */
	MODE_11NG_HT20   = 5,  /* 11g HT20 mode */
	MODE_11NA_HT40   = 6,  /* 11a HT40 mode */
	MODE_11NG_HT40   = 7,  /* 11g HT40 mode */
	MODE_11AC_VHT20 = 8,
	MODE_11AC_VHT40 = 9,
	MODE_11AC_VHT80 = 10,
	/*    MODE_11AC_VHT160 = 11, */
	MODE_11AC_VHT20_2G = 11,
	MODE_11AC_VHT40_2G = 12,
	MODE_11AC_VHT80_2G = 13,
	MODE_11AC_VHT80_80 = 14,
	MODE_11AC_VHT160 = 15,
	MODE_UNKNOWN    = 16,
	MODE_MAX        = 16
};

static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
{
	switch (mode) {
	case MODE_11A:
		return "11a";
	case MODE_11G:
		return "11g";
	case MODE_11B:
		return "11b";
	case MODE_11GONLY:
		return "11gonly";
	case MODE_11NA_HT20:
		return "11na-ht20";
	case MODE_11NG_HT20:
		return "11ng-ht20";
	case MODE_11NA_HT40:
		return "11na-ht40";
	case MODE_11NG_HT40:
		return "11ng-ht40";
	case MODE_11AC_VHT20:
		return "11ac-vht20";
	case MODE_11AC_VHT40:
		return "11ac-vht40";
	case MODE_11AC_VHT80:
		return "11ac-vht80";
	case MODE_11AC_VHT160:
		return "11ac-vht160";
	case MODE_11AC_VHT80_80:
		return "11ac-vht80+80";
	case MODE_11AC_VHT20_2G:
		return "11ac-vht20-2g";
	case MODE_11AC_VHT40_2G:
		return "11ac-vht40-2g";
	case MODE_11AC_VHT80_2G:
		return "11ac-vht80-2g";
	case MODE_UNKNOWN:
		/* skip */
		break;

		/* no default handler to allow compiler to check that the
		 * enum is fully handled
		 */
	};

	return "<unknown>";
}

#define WMI_CHAN_LIST_TAG	0x1
#define WMI_SSID_LIST_TAG	0x2
#define WMI_BSSID_LIST_TAG	0x3
#define WMI_IE_TAG		0x4

struct wmi_channel {
	__le32 mhz;
	__le32 band_center_freq1;
	__le32 band_center_freq2; /* valid for 11ac, 80plus80 */
	union {
		__le32 flags; /* WMI_CHAN_FLAG_ */
		struct {
			u8 mode; /* only 6 LSBs */
		} __packed;
	} __packed;
	union {
		__le32 reginfo0;
		struct {
			/* note: power unit is 0.5 dBm */
			u8 min_power;
			u8 max_power;
			u8 reg_power;
			u8 reg_classid;
		} __packed;
	} __packed;
	union {
		__le32 reginfo1;
		struct {
			u8 antenna_max;
			u8 max_tx_power;
		} __packed;
	} __packed;
} __packed;

struct wmi_channel_arg {
	u32 freq;
	u32 band_center_freq1;
	u32 band_center_freq2;
	bool passive;
	bool allow_ibss;
	bool allow_ht;
	bool allow_vht;
	bool ht40plus;
	bool chan_radar;
	/* note: power unit is 0.5 dBm */
	u32 min_power;
	u32 max_power;
	u32 max_reg_power;
	u32 max_antenna_gain;
	u32 reg_class_id;
	enum wmi_phy_mode mode;
};

enum wmi_channel_change_cause {
	WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
	WMI_CHANNEL_CHANGE_CAUSE_CSA,
};

#define WMI_CHAN_FLAG_HT40_PLUS      (1 << 6)
#define WMI_CHAN_FLAG_PASSIVE        (1 << 7)
#define WMI_CHAN_FLAG_ADHOC_ALLOWED  (1 << 8)
#define WMI_CHAN_FLAG_AP_DISABLED    (1 << 9)
#define WMI_CHAN_FLAG_DFS            (1 << 10)
#define WMI_CHAN_FLAG_ALLOW_HT       (1 << 11)
#define WMI_CHAN_FLAG_ALLOW_VHT      (1 << 12)

/* Indicate reason for channel switch */
#define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)

#define WMI_MAX_SPATIAL_STREAM        3 /* default max ss */

/* HT Capabilities*/
#define WMI_HT_CAP_ENABLED                0x0001   /* HT Enabled/ disabled */
#define WMI_HT_CAP_HT20_SGI       0x0002   /* Short Guard Interval with HT20 */
#define WMI_HT_CAP_DYNAMIC_SMPS           0x0004   /* Dynamic MIMO powersave */
#define WMI_HT_CAP_TX_STBC                0x0008   /* B3 TX STBC */
#define WMI_HT_CAP_TX_STBC_MASK_SHIFT     3
#define WMI_HT_CAP_RX_STBC                0x0030   /* B4-B5 RX STBC */
#define WMI_HT_CAP_RX_STBC_MASK_SHIFT     4
#define WMI_HT_CAP_LDPC                   0x0040   /* LDPC supported */
#define WMI_HT_CAP_L_SIG_TXOP_PROT        0x0080   /* L-SIG TXOP Protection */
#define WMI_HT_CAP_MPDU_DENSITY           0x0700   /* MPDU Density */
#define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
#define WMI_HT_CAP_HT40_SGI               0x0800

#define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED       | \
				WMI_HT_CAP_HT20_SGI      | \
				WMI_HT_CAP_HT40_SGI      | \
				WMI_HT_CAP_TX_STBC       | \
				WMI_HT_CAP_RX_STBC       | \
				WMI_HT_CAP_LDPC)

/*
 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
 * field. The fields not defined here are not supported, or reserved.
 * Do not change these masks and if you have to add new one follow the
 * bitmask as specified by 802.11ac draft.
 */

#define WMI_VHT_CAP_MAX_MPDU_LEN_MASK            0x00000003
#define WMI_VHT_CAP_RX_LDPC                      0x00000010
#define WMI_VHT_CAP_SGI_80MHZ                    0x00000020
#define WMI_VHT_CAP_SGI_160MHZ                   0x00000040
#define WMI_VHT_CAP_TX_STBC                      0x00000080
#define WMI_VHT_CAP_RX_STBC_MASK                 0x00000300
#define WMI_VHT_CAP_RX_STBC_MASK_SHIFT           8
#define WMI_VHT_CAP_SU_BFER                      0x00000800
#define WMI_VHT_CAP_SU_BFEE                      0x00001000
#define WMI_VHT_CAP_MAX_CS_ANT_MASK              0x0000E000
#define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT        13
#define WMI_VHT_CAP_MAX_SND_DIM_MASK             0x00070000
#define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT       16
#define WMI_VHT_CAP_MU_BFER                      0x00080000
#define WMI_VHT_CAP_MU_BFEE                      0x00100000
#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP            0x03800000
#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT      23
#define WMI_VHT_CAP_RX_FIXED_ANT                 0x10000000
#define WMI_VHT_CAP_TX_FIXED_ANT                 0x20000000

/* The following also refer for max HT AMSDU */
#define WMI_VHT_CAP_MAX_MPDU_LEN_3839            0x00000000
#define WMI_VHT_CAP_MAX_MPDU_LEN_7935            0x00000001
#define WMI_VHT_CAP_MAX_MPDU_LEN_11454           0x00000002

#define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454  | \
				 WMI_VHT_CAP_RX_LDPC             | \
				 WMI_VHT_CAP_SGI_80MHZ           | \
				 WMI_VHT_CAP_TX_STBC             | \
				 WMI_VHT_CAP_RX_STBC_MASK        | \
				 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP   | \
				 WMI_VHT_CAP_RX_FIXED_ANT        | \
				 WMI_VHT_CAP_TX_FIXED_ANT)

/*
 * Interested readers refer to Rx/Tx MCS Map definition as defined in
 * 802.11ac
 */
#define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss)      ((3 & (r)) << (((ss) - 1) << 1))
#define WMI_VHT_MAX_SUPP_RATE_MASK           0x1fff0000
#define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT     16

enum {
	REGDMN_MODE_11A              = 0x00001, /* 11a channels */
	REGDMN_MODE_TURBO            = 0x00002, /* 11a turbo-only channels */
	REGDMN_MODE_11B              = 0x00004, /* 11b channels */
	REGDMN_MODE_PUREG            = 0x00008, /* 11g channels (OFDM only) */
	REGDMN_MODE_11G              = 0x00008, /* XXX historical */
	REGDMN_MODE_108G             = 0x00020, /* 11a+Turbo channels */
	REGDMN_MODE_108A             = 0x00040, /* 11g+Turbo channels */
	REGDMN_MODE_XR               = 0x00100, /* XR channels */
	REGDMN_MODE_11A_HALF_RATE    = 0x00200, /* 11A half rate channels */
	REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
	REGDMN_MODE_11NG_HT20        = 0x00800, /* 11N-G HT20 channels */
	REGDMN_MODE_11NA_HT20        = 0x01000, /* 11N-A HT20 channels */
	REGDMN_MODE_11NG_HT40PLUS    = 0x02000, /* 11N-G HT40 + channels */
	REGDMN_MODE_11NG_HT40MINUS   = 0x04000, /* 11N-G HT40 - channels */
	REGDMN_MODE_11NA_HT40PLUS    = 0x08000, /* 11N-A HT40 + channels */
	REGDMN_MODE_11NA_HT40MINUS   = 0x10000, /* 11N-A HT40 - channels */
	REGDMN_MODE_11AC_VHT20       = 0x20000, /* 5Ghz, VHT20 */
	REGDMN_MODE_11AC_VHT40PLUS   = 0x40000, /* 5Ghz, VHT40 + channels */
	REGDMN_MODE_11AC_VHT40MINUS  = 0x80000, /* 5Ghz  VHT40 - channels */
	REGDMN_MODE_11AC_VHT80       = 0x100000, /* 5Ghz, VHT80 channels */
	REGDMN_MODE_11AC_VHT160      = 0x200000,     /* 5Ghz, VHT160 channels */
	REGDMN_MODE_11AC_VHT80_80    = 0x400000,     /* 5Ghz, VHT80+80 channels */
	REGDMN_MODE_ALL              = 0xffffffff
};

#define REGDMN_CAP1_CHAN_HALF_RATE        0x00000001
#define REGDMN_CAP1_CHAN_QUARTER_RATE     0x00000002
#define REGDMN_CAP1_CHAN_HAL49GHZ         0x00000004

/* regulatory capabilities */
#define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND   0x0040
#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN    0x0080
#define REGDMN_EEPROM_EEREGCAP_EN_KK_U2         0x0100
#define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND    0x0200
#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD     0x0400
#define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A    0x0800

struct hal_reg_capabilities {
	/* regdomain value specified in EEPROM */
	__le32 eeprom_rd;
	/*regdomain */
	__le32 eeprom_rd_ext;
	/* CAP1 capabilities bit map. */
	__le32 regcap1;
	/* REGDMN EEPROM CAP. */
	__le32 regcap2;
	/* REGDMN MODE */
	__le32 wireless_modes;
	__le32 low_2ghz_chan;
	__le32 high_2ghz_chan;
	__le32 low_5ghz_chan;
	__le32 high_5ghz_chan;
} __packed;

enum wlan_mode_capability {
	WHAL_WLAN_11A_CAPABILITY   = 0x1,
	WHAL_WLAN_11G_CAPABILITY   = 0x2,
	WHAL_WLAN_11AG_CAPABILITY  = 0x3,
};

/* structure used by FW for requesting host memory */
struct wlan_host_mem_req {
	/* ID of the request */
	__le32 req_id;
	/* size of the  of each unit */
	__le32 unit_size;
	/* flags to  indicate that
	 * the number units is dependent
	 * on number of resources(num vdevs num peers .. etc)
	 */
	__le32 num_unit_info;
	/*
	 * actual number of units to allocate . if flags in the num_unit_info
	 * indicate that number of units is tied to number of a particular
	 * resource to allocate then  num_units filed is set to 0 and host
	 * will derive the number units from number of the resources it is
	 * requesting.
	 */
	__le32 num_units;
} __packed;

/*
 * The following struct holds optional payload for
 * wmi_service_ready_event,e.g., 11ac pass some of the
 * device capability to the host.
 */
struct wmi_service_ready_event {
	__le32 sw_version;
	__le32 sw_version_1;
	__le32 abi_version;
	/* WMI_PHY_CAPABILITY */
	__le32 phy_capability;
	/* Maximum number of frag table entries that SW will populate less 1 */
	__le32 max_frag_entry;
	__le32 wmi_service_bitmap[16];
	__le32 num_rf_chains;
	/*
	 * The following field is only valid for service type
	 * WMI_SERVICE_11AC
	 */
	__le32 ht_cap_info; /* WMI HT Capability */
	__le32 vht_cap_info; /* VHT capability info field of 802.11ac */
	__le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
	__le32 hw_min_tx_power;
	__le32 hw_max_tx_power;
	struct hal_reg_capabilities hal_reg_capabilities;
	__le32 sys_cap_info;
	__le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
	/*
	 * Max beacon and Probe Response IE offload size
	 * (includes optional P2P IEs)
	 */
	__le32 max_bcn_ie_size;
	/*
	 * request to host to allocate a chuck of memory and pss it down to FW
	 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
	 * data structures. Only valid for low latency interfaces like PCIE
	 * where FW can access this memory directly (or) by DMA.
	 */
	__le32 num_mem_reqs;
	struct wlan_host_mem_req mem_reqs[0];
} __packed;

/* This is the definition from 10.X firmware branch */
struct wmi_10x_service_ready_event {
	__le32 sw_version;
	__le32 abi_version;

	/* WMI_PHY_CAPABILITY */
	__le32 phy_capability;

	/* Maximum number of frag table entries that SW will populate less 1 */
	__le32 max_frag_entry;
	__le32 wmi_service_bitmap[16];
	__le32 num_rf_chains;

	/*
	 * The following field is only valid for service type
	 * WMI_SERVICE_11AC
	 */
	__le32 ht_cap_info; /* WMI HT Capability */
	__le32 vht_cap_info; /* VHT capability info field of 802.11ac */
	__le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
	__le32 hw_min_tx_power;
	__le32 hw_max_tx_power;

	struct hal_reg_capabilities hal_reg_capabilities;

	__le32 sys_cap_info;
	__le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */

	/*
	 * request to host to allocate a chuck of memory and pss it down to FW
	 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
	 * data structures. Only valid for low latency interfaces like PCIE
	 * where FW can access this memory directly (or) by DMA.
	 */
	__le32 num_mem_reqs;

	struct wlan_host_mem_req mem_reqs[0];
} __packed;

#define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ)
#define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ)

struct wmi_ready_event {
	__le32 sw_version;
	__le32 abi_version;
	struct wmi_mac_addr mac_addr;
	__le32 status;
} __packed;

struct wmi_resource_config {
	/* number of virtual devices (VAPs) to support */
	__le32 num_vdevs;

	/* number of peer nodes to support */
	__le32 num_peers;

	/*
	 * In offload mode target supports features like WOW, chatter and
	 * other protocol offloads. In order to support them some
	 * functionalities like reorder buffering, PN checking need to be
	 * done in target. This determines maximum number of peers supported
	 * by target in offload mode
	 */
	__le32 num_offload_peers;

	/* For target-based RX reordering */
	__le32 num_offload_reorder_bufs;

	/* number of keys per peer */
	__le32 num_peer_keys;

	/* total number of TX/RX data TIDs */
	__le32 num_tids;

	/*
	 * max skid for resolving hash collisions
	 *
	 *   The address search table is sparse, so that if two MAC addresses
	 *   result in the same hash value, the second of these conflicting
	 *   entries can slide to the next index in the address search table,
	 *   and use it, if it is unoccupied.  This ast_skid_limit parameter
	 *   specifies the upper bound on how many subsequent indices to search
	 *   over to find an unoccupied space.
	 */
	__le32 ast_skid_limit;

	/*
	 * the nominal chain mask for transmit
	 *
	 *   The chain mask may be modified dynamically, e.g. to operate AP
	 *   tx with a reduced number of chains if no clients are associated.
	 *   This configuration parameter specifies the nominal chain-mask that
	 *   should be used when not operating with a reduced set of tx chains.
	 */
	__le32 tx_chain_mask;

	/*
	 * the nominal chain mask for receive
	 *
	 *   The chain mask may be modified dynamically, e.g. for a client
	 *   to use a reduced number of chains for receive if the traffic to
	 *   the client is low enough that it doesn't require downlink MIMO
	 *   or antenna diversity.
	 *   This configuration parameter specifies the nominal chain-mask that
	 *   should be used when not operating with a reduced set of rx chains.
	 */
	__le32 rx_chain_mask;

	/*
	 * what rx reorder timeout (ms) to use for the AC
	 *
	 *   Each WMM access class (voice, video, best-effort, background) will
	 *   have its own timeout value to dictate how long to wait for missing
	 *   rx MPDUs to arrive before flushing subsequent MPDUs that have
	 *   already been received.
	 *   This parameter specifies the timeout in milliseconds for each
	 *   class.
	 */
	__le32 rx_timeout_pri_vi;
	__le32 rx_timeout_pri_vo;
	__le32 rx_timeout_pri_be;
	__le32 rx_timeout_pri_bk;

	/*
	 * what mode the rx should decap packets to
	 *
	 *   MAC can decap to RAW (no decap), native wifi or Ethernet types
	 *   THis setting also determines the default TX behavior, however TX
	 *   behavior can be modified on a per VAP basis during VAP init
	 */
	__le32 rx_decap_mode;

	/* what is the maximum number of scan requests that can be queued */
	__le32 scan_max_pending_reqs;

	/* maximum VDEV that could use BMISS offload */
	__le32 bmiss_offload_max_vdev;

	/* maximum VDEV that could use offload roaming */
	__le32 roam_offload_max_vdev;

	/* maximum AP profiles that would push to offload roaming */
	__le32 roam_offload_max_ap_profiles;

	/*
	 * how many groups to use for mcast->ucast conversion
	 *
	 *   The target's WAL maintains a table to hold information regarding
	 *   which peers belong to a given multicast group, so that if
	 *   multicast->unicast conversion is enabled, the target can convert
	 *   multicast tx frames to a series of unicast tx frames, to each
	 *   peer within the multicast group.
	     This num_mcast_groups configuration parameter tells the target how
	 *   many multicast groups to provide storage for within its multicast
	 *   group membership table.
	 */
	__le32 num_mcast_groups;

	/*
	 * size to alloc for the mcast membership table
	 *
	 *   This num_mcast_table_elems configuration parameter tells the
	 *   target how many peer elements it needs to provide storage for in
	 *   its multicast group membership table.
	 *   These multicast group membership table elements are shared by the
	 *   multicast groups stored within the table.
	 */
	__le32 num_mcast_table_elems;

	/*
	 * whether/how to do multicast->unicast conversion
	 *
	 *   This configuration parameter specifies whether the target should
	 *   perform multicast --> unicast conversion on transmit, and if so,
	 *   what to do if it finds no entries in its multicast group
	 *   membership table for the multicast IP address in the tx frame.
	 *   Configuration value:
	 *   0 -> Do not perform multicast to unicast conversion.
	 *   1 -> Convert multicast frames to unicast, if the IP multicast
	 *        address from the tx frame is found in the multicast group
	 *        membership table.  If the IP multicast address is not found,
	 *        drop the frame.
	 *   2 -> Convert multicast frames to unicast, if the IP multicast
	 *        address from the tx frame is found in the multicast group
	 *        membership table.  If the IP multicast address is not found,
	 *        transmit the frame as multicast.
	 */
	__le32 mcast2ucast_mode;

	/*
	 * how much memory to allocate for a tx PPDU dbg log
	 *
	 *   This parameter controls how much memory the target will allocate
	 *   to store a log of tx PPDU meta-information (how large the PPDU
	 *   was, when it was sent, whether it was successful, etc.)
	 */
	__le32 tx_dbg_log_size;

	/* how many AST entries to be allocated for WDS */
	__le32 num_wds_entries;

	/*
	 * MAC DMA burst size, e.g., For target PCI limit can be
	 * 0 -default, 1 256B
	 */
	__le32 dma_burst_size;

	/*
	 * Fixed delimiters to be inserted after every MPDU to
	 * account for interface latency to avoid underrun.
	 */
	__le32 mac_aggr_delim;

	/*
	 *   determine whether target is responsible for detecting duplicate
	 *   non-aggregate MPDU and timing out stale fragments.
	 *
	 *   A-MPDU reordering is always performed on the target.
	 *
	 *   0: target responsible for frag timeout and dup checking
	 *   1: host responsible for frag timeout and dup checking
	 */
	__le32 rx_skip_defrag_timeout_dup_detection_check;

	/*
	 * Configuration for VoW :
	 * No of Video Nodes to be supported
	 * and Max no of descriptors for each Video link (node).
	 */
	__le32 vow_config;

	/* maximum VDEV that could use GTK offload */
	__le32 gtk_offload_max_vdev;

	/* Number of msdu descriptors target should use */
	__le32 num_msdu_desc;

	/*
	 * Max. number of Tx fragments per MSDU
	 *  This parameter controls the max number of Tx fragments per MSDU.
	 *  This is sent by the target as part of the WMI_SERVICE_READY event
	 *  and is overridden by the OS shim as required.
	 */
	__le32 max_frag_entries;
} __packed;

struct wmi_resource_config_10x {
	/* number of virtual devices (VAPs) to support */
	__le32 num_vdevs;

	/* number of peer nodes to support */
	__le32 num_peers;

	/* number of keys per peer */
	__le32 num_peer_keys;

	/* total number of TX/RX data TIDs */
	__le32 num_tids;

	/*
	 * max skid for resolving hash collisions
	 *
	 *   The address search table is sparse, so that if two MAC addresses
	 *   result in the same hash value, the second of these conflicting
	 *   entries can slide to the next index in the address search table,
	 *   and use it, if it is unoccupied.  This ast_skid_limit parameter
	 *   specifies the upper bound on how many subsequent indices to search
	 *   over to find an unoccupied space.
	 */
	__le32 ast_skid_limit;

	/*
	 * the nominal chain mask for transmit
	 *
	 *   The chain mask may be modified dynamically, e.g. to operate AP
	 *   tx with a reduced number of chains if no clients are associated.
	 *   This configuration parameter specifies the nominal chain-mask that
	 *   should be used when not operating with a reduced set of tx chains.
	 */
	__le32 tx_chain_mask;

	/*
	 * the nominal chain mask for receive
	 *
	 *   The chain mask may be modified dynamically, e.g. for a client
	 *   to use a reduced number of chains for receive if the traffic to
	 *   the client is low enough that it doesn't require downlink MIMO
	 *   or antenna diversity.
	 *   This configuration parameter specifies the nominal chain-mask that
	 *   should be used when not operating with a reduced set of rx chains.
	 */
	__le32 rx_chain_mask;

	/*
	 * what rx reorder timeout (ms) to use for the AC
	 *
	 *   Each WMM access class (voice, video, best-effort, background) will
	 *   have its own timeout value to dictate how long to wait for missing
	 *   rx MPDUs to arrive before flushing subsequent MPDUs that have
	 *   already been received.
	 *   This parameter specifies the timeout in milliseconds for each
	 *   class.
	 */
	__le32 rx_timeout_pri_vi;
	__le32 rx_timeout_pri_vo;
	__le32 rx_timeout_pri_be;
	__le32 rx_timeout_pri_bk;

	/*
	 * what mode the rx should decap packets to
	 *
	 *   MAC can decap to RAW (no decap), native wifi or Ethernet types
	 *   THis setting also determines the default TX behavior, however TX
	 *   behavior can be modified on a per VAP basis during VAP init
	 */
	__le32 rx_decap_mode;

	/* what is the maximum number of scan requests that can be queued */
	__le32 scan_max_pending_reqs;

	/* maximum VDEV that could use BMISS offload */
	__le32 bmiss_offload_max_vdev;

	/* maximum VDEV that could use offload roaming */
	__le32 roam_offload_max_vdev;

	/* maximum AP profiles that would push to offload roaming */
	__le32 roam_offload_max_ap_profiles;

	/*
	 * how many groups to use for mcast->ucast conversion
	 *
	 *   The target's WAL maintains a table to hold information regarding
	 *   which peers belong to a given multicast group, so that if
	 *   multicast->unicast conversion is enabled, the target can convert
	 *   multicast tx frames to a series of unicast tx frames, to each
	 *   peer within the multicast group.
	     This num_mcast_groups configuration parameter tells the target how
	 *   many multicast groups to provide storage for within its multicast
	 *   group membership table.
	 */
	__le32 num_mcast_groups;

	/*
	 * size to alloc for the mcast membership table
	 *
	 *   This num_mcast_table_elems configuration parameter tells the
	 *   target how many peer elements it needs to provide storage for in
	 *   its multicast group membership table.
	 *   These multicast group membership table elements are shared by the
	 *   multicast groups stored within the table.
	 */
	__le32 num_mcast_table_elems;

	/*
	 * whether/how to do multicast->unicast conversion
	 *
	 *   This configuration parameter specifies whether the target should
	 *   perform multicast --> unicast conversion on transmit, and if so,
	 *   what to do if it finds no entries in its multicast group
	 *   membership table for the multicast IP address in the tx frame.
	 *   Configuration value:
	 *   0 -> Do not perform multicast to unicast conversion.
	 *   1 -> Convert multicast frames to unicast, if the IP multicast
	 *        address from the tx frame is found in the multicast group
	 *        membership table.  If the IP multicast address is not found,
	 *        drop the frame.
	 *   2 -> Convert multicast frames to unicast, if the IP multicast
	 *        address from the tx frame is found in the multicast group
	 *        membership table.  If the IP multicast address is not found,
	 *        transmit the frame as multicast.
	 */
	__le32 mcast2ucast_mode;

	/*
	 * how much memory to allocate for a tx PPDU dbg log
	 *
	 *   This parameter controls how much memory the target will allocate
	 *   to store a log of tx PPDU meta-information (how large the PPDU
	 *   was, when it was sent, whether it was successful, etc.)
	 */
	__le32 tx_dbg_log_size;

	/* how many AST entries to be allocated for WDS */
	__le32 num_wds_entries;

	/*
	 * MAC DMA burst size, e.g., For target PCI limit can be
	 * 0 -default, 1 256B
	 */
	__le32 dma_burst_size;

	/*
	 * Fixed delimiters to be inserted after every MPDU to
	 * account for interface latency to avoid underrun.
	 */
	__le32 mac_aggr_delim;

	/*
	 *   determine whether target is responsible for detecting duplicate
	 *   non-aggregate MPDU and timing out stale fragments.
	 *
	 *   A-MPDU reordering is always performed on the target.
	 *
	 *   0: target responsible for frag timeout and dup checking
	 *   1: host responsible for frag timeout and dup checking
	 */
	__le32 rx_skip_defrag_timeout_dup_detection_check;

	/*
	 * Configuration for VoW :
	 * No of Video Nodes to be supported
	 * and Max no of descriptors for each Video link (node).
	 */
	__le32 vow_config;

	/* Number of msdu descriptors target should use */
	__le32 num_msdu_desc;

	/*
	 * Max. number of Tx fragments per MSDU
	 *  This parameter controls the max number of Tx fragments per MSDU.
	 *  This is sent by the target as part of the WMI_SERVICE_READY event
	 *  and is overridden by the OS shim as required.
	 */
	__le32 max_frag_entries;
} __packed;

enum wmi_10_2_feature_mask {
	WMI_10_2_RX_BATCH_MODE = BIT(0),
	WMI_10_2_ATF_CONFIG    = BIT(1),
	WMI_10_2_COEX_GPIO     = BIT(3),
	WMI_10_2_BSS_CHAN_INFO = BIT(6),
	WMI_10_2_PEER_STATS    = BIT(7),
};

struct wmi_resource_config_10_2 {
	struct wmi_resource_config_10x common;
	__le32 max_peer_ext_stats;
	__le32 smart_ant_cap; /* 0-disable, 1-enable */
	__le32 bk_min_free;
	__le32 be_min_free;
	__le32 vi_min_free;
	__le32 vo_min_free;
	__le32 feature_mask;
} __packed;

#define NUM_UNITS_IS_NUM_VDEVS         BIT(0)
#define NUM_UNITS_IS_NUM_PEERS         BIT(1)
#define NUM_UNITS_IS_NUM_ACTIVE_PEERS  BIT(2)

struct wmi_resource_config_10_4 {
	/* Number of virtual devices (VAPs) to support */
	__le32 num_vdevs;

	/* Number of peer nodes to support */
	__le32 num_peers;

	/* Number of active peer nodes to support */
	__le32 num_active_peers;

	/* In offload mode, target supports features like WOW, chatter and other
	 * protocol offloads. In order to support them some functionalities like
	 * reorder buffering, PN checking need to be done in target.
	 * This determines maximum number of peers supported by target in
	 * offload mode.
	 */
	__le32 num_offload_peers;

	/* Number of reorder buffers available for doing target based reorder
	 * Rx reorder buffering
	 */
	__le32 num_offload_reorder_buffs;

	/* Number of keys per peer */
	__le32 num_peer_keys;

	/* Total number of TX/RX data TIDs */
	__le32 num_tids;

	/* Max skid for resolving hash collisions.
	 * The address search table is sparse, so that if two MAC addresses
	 * result in the same hash value, the second of these conflicting
	 * entries can slide to the next index in the address search table,
	 * and use it, if it is unoccupied.  This ast_skid_limit parameter
	 * specifies the upper bound on how many subsequent indices to search
	 * over to find an unoccupied space.
	 */
	__le32 ast_skid_limit;

	/* The nominal chain mask for transmit.
	 * The chain mask may be modified dynamically, e.g. to operate AP tx
	 * with a reduced number of chains if no clients are associated.
	 * This configuration parameter specifies the nominal chain-mask that
	 * should be used when not operating with a reduced set of tx chains.
	 */
	__le32 tx_chain_mask;

	/* The nominal chain mask for receive.
	 * The chain mask may be modified dynamically, e.g. for a client to use
	 * a reduced number of chains for receive if the traffic to the client
	 * is low enough that it doesn't require downlink MIMO or antenna
	 * diversity. This configuration parameter specifies the nominal
	 * chain-mask that should be used when not operating with a reduced
	 * set of rx chains.
	 */
	__le32 rx_chain_mask;

	/* What rx reorder timeout (ms) to use for the AC.
	 * Each WMM access class (voice, video, best-effort, background) will
	 * have its own timeout value to dictate how long to wait for missing
	 * rx MPDUs to arrive before flushing subsequent MPDUs that have already
	 * been received. This parameter specifies the timeout in milliseconds
	 * for each class.
	 */
	__le32 rx_timeout_pri[4];

	/* What mode the rx should decap packets to.
	 * MAC can decap to RAW (no decap), native wifi or Ethernet types.
	 * This setting also determines the default TX behavior, however TX
	 * behavior can be modified on a per VAP basis during VAP init
	 */
	__le32 rx_decap_mode;

	__le32 scan_max_pending_req;

	__le32 bmiss_offload_max_vdev;

	__le32 roam_offload_max_vdev;

	__le32 roam_offload_max_ap_profiles;

	/* How many groups to use for mcast->ucast conversion.
	 * The target's WAL maintains a table to hold information regarding
	 * which peers belong to a given multicast group, so that if
	 * multicast->unicast conversion is enabled, the target can convert
	 * multicast tx frames to a series of unicast tx frames, to each peer
	 * within the multicast group. This num_mcast_groups configuration
	 * parameter tells the target how many multicast groups to provide
	 * storage for within its multicast group membership table.
	 */
	__le32 num_mcast_groups;

	/* Size to alloc for the mcast membership table.
	 * This num_mcast_table_elems configuration parameter tells the target
	 * how many peer elements it needs to provide storage for in its
	 * multicast group membership table. These multicast group membership
	 * table elements are shared by the multicast groups stored within
	 * the table.
	 */
	__le32 num_mcast_table_elems;

	/* Whether/how to do multicast->unicast conversion.
	 * This configuration parameter specifies whether the target should
	 * perform multicast --> unicast conversion on transmit, and if so,
	 * what to do if it finds no entries in its multicast group membership
	 * table for the multicast IP address in the tx frame.
	 * Configuration value:
	 * 0 -> Do not perform multicast to unicast conversion.
	 * 1 -> Convert multicast frames to unicast, if the IP multicast address
	 *      from the tx frame is found in the multicast group membership
	 *      table.  If the IP multicast address is not found, drop the frame
	 * 2 -> Convert multicast frames to unicast, if the IP multicast address
	 *      from the tx frame is found in the multicast group membership
	 *      table.  If the IP multicast address is not found, transmit the
	 *      frame as multicast.
	 */
	__le32 mcast2ucast_mode;

	/* How much memory to allocate for a tx PPDU dbg log.
	 * This parameter controls how much memory the target will allocate to
	 * store a log of tx PPDU meta-information (how large the PPDU was,
	 * when it was sent, whether it was successful, etc.)
	 */
	__le32 tx_dbg_log_size;

	/* How many AST entries to be allocated for WDS */
	__le32 num_wds_entries;

	/* MAC DMA burst size. 0 -default, 1 -256B */
	__le32 dma_burst_size;

	/* Fixed delimiters to be inserted after every MPDU to account for
	 * interface latency to avoid underrun.
	 */
	__le32 mac_aggr_delim;

	/* Determine whether target is responsible for detecting duplicate
	 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
	 * is always performed on the target.
	 *
	 * 0: target responsible for frag timeout and dup checking
	 * 1: host responsible for frag timeout and dup checking
	 */
	__le32 rx_skip_defrag_timeout_dup_detection_check;

	/* Configuration for VoW : No of Video nodes to be supported and max
	 * no of descriptors for each video link (node).
	 */
	__le32 vow_config;

	/* Maximum vdev that could use gtk offload */
	__le32 gtk_offload_max_vdev;

	/* Number of msdu descriptors target should use */
	__le32 num_msdu_desc;

	/* Max number of tx fragments per MSDU.
	 * This parameter controls the max number of tx fragments per MSDU.
	 * This will passed by target as part of the WMI_SERVICE_READY event
	 * and is overridden by the OS shim as required.
	 */
	__le32 max_frag_entries;

	/* Max number of extended peer stats.
	 * This parameter controls the max number of peers for which extended
	 * statistics are supported by target
	 */
	__le32 max_peer_ext_stats;

	/* Smart antenna capabilities information.
	 * 1 - Smart antenna is enabled
	 * 0 - Smart antenna is disabled
	 * In future this can contain smart antenna specific capabilities.
	 */
	__le32 smart_ant_cap;

	/* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
	 * during init.
	 */
	__le32 bk_minfree;
	__le32 be_minfree;
	__le32 vi_minfree;
	__le32 vo_minfree;

	/* Rx batch mode capability.
	 * 1 - Rx batch mode enabled
	 * 0 - Rx batch mode disabled
	 */
	__le32 rx_batchmode;

	/* Thermal throttling capability.
	 * 1 - Capable of thermal throttling
	 * 0 - Not capable of thermal throttling
	 */
	__le32 tt_support;

	/* ATF configuration.
	 * 1  - Enable ATF
	 * 0  - Disable ATF
	 */
	__le32 atf_config;

	/* Configure padding to manage IP header un-alignment
	 * 1  - Enable padding
	 * 0  - Disable padding
	 */
	__le32 iphdr_pad_config;

	/* qwrap configuration (bits 15-0)
	 * 1  - This is qwrap configuration
	 * 0  - This is not qwrap
	 *
	 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables)
	 * In order to get ack-RSSI reporting and to specify the tx-rate for
	 * individual frames, this option must be enabled.  This uses an extra
	 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it.
	 */
	__le32 qwrap_config;
} __packed;

/**
 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags
 * @WMI_10_4_LTEU_SUPPORT: LTEU config
 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config
 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan
 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan
 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats
 * @WMI_10_4_PEER_STATS: Per station stats
 */
enum wmi_10_4_feature_mask {
	WMI_10_4_LTEU_SUPPORT			= BIT(0),
	WMI_10_4_COEX_GPIO_SUPPORT		= BIT(1),
	WMI_10_4_AUX_RADIO_SPECTRAL_INTF	= BIT(2),
	WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF	= BIT(3),
	WMI_10_4_BSS_CHANNEL_INFO_64		= BIT(4),
	WMI_10_4_PEER_STATS			= BIT(5),
};

struct wmi_ext_resource_config_10_4_cmd {
	/* contains enum wmi_host_platform_type */
	__le32 host_platform_config;
	/* see enum wmi_10_4_feature_mask */
	__le32 fw_feature_bitmap;
};

/* strucutre describing host memory chunk. */
struct host_memory_chunk {
	/* id of the request that is passed up in service ready */
	__le32 req_id;
	/* the physical address the memory chunk */
	__le32 ptr;
	/* size of the chunk */
	__le32 size;
} __packed;

struct wmi_host_mem_chunks {
	__le32 count;
	/* some fw revisions require at least 1 chunk regardless of count */
	struct host_memory_chunk items[1];
} __packed;

struct wmi_init_cmd {
	struct wmi_resource_config resource_config;
	struct wmi_host_mem_chunks mem_chunks;
} __packed;

/* _10x structure is from 10.X FW API */
struct wmi_init_cmd_10x {
	struct wmi_resource_config_10x resource_config;
	struct wmi_host_mem_chunks mem_chunks;
} __packed;

struct wmi_init_cmd_10_2 {
	struct wmi_resource_config_10_2 resource_config;
	struct wmi_host_mem_chunks mem_chunks;
} __packed;

struct wmi_init_cmd_10_4 {
	struct wmi_resource_config_10_4 resource_config;
	struct wmi_host_mem_chunks mem_chunks;
} __packed;

struct wmi_chan_list_entry {
	__le16 freq;
	u8 phy_mode; /* valid for 10.2 only */
	u8 reserved;
} __packed;

/* TLV for channel list */
struct wmi_chan_list {
	__le32 tag; /* WMI_CHAN_LIST_TAG */
	__le32 num_chan;
	struct wmi_chan_list_entry channel_list[0];
} __packed;

struct wmi_bssid_list {
	__le32 tag; /* WMI_BSSID_LIST_TAG */
	__le32 num_bssid;
	struct wmi_mac_addr bssid_list[0];
} __packed;

struct wmi_ie_data {
	__le32 tag; /* WMI_IE_TAG */
	__le32 ie_len;
	u8 ie_data[0];
} __packed;

struct wmi_ssid {
	__le32 ssid_len;
	u8 ssid[32];
} __packed;

struct wmi_ssid_list {
	__le32 tag; /* WMI_SSID_LIST_TAG */
	__le32 num_ssids;
	struct wmi_ssid ssids[0];
} __packed;

/* prefix used by scan requestor ids on the host */
#define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000

/* prefix used by scan request ids generated on the host */
/* host cycles through the lower 12 bits to generate ids */
#define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000

#define WLAN_SCAN_PARAMS_MAX_SSID    16
#define WLAN_SCAN_PARAMS_MAX_BSSID   4
#define WLAN_SCAN_PARAMS_MAX_IE_LEN  256

/* Values lower than this may be refused by some firmware revisions with a scan
 * completion with a timedout reason.
 */
#define WMI_SCAN_CHAN_MIN_TIME_MSEC 40

/* Scan priority numbers must be sequential, starting with 0 */
enum wmi_scan_priority {
	WMI_SCAN_PRIORITY_VERY_LOW = 0,
	WMI_SCAN_PRIORITY_LOW,
	WMI_SCAN_PRIORITY_MEDIUM,
	WMI_SCAN_PRIORITY_HIGH,
	WMI_SCAN_PRIORITY_VERY_HIGH,
	WMI_SCAN_PRIORITY_COUNT   /* number of priorities supported */
};

struct wmi_start_scan_common {
	/* Scan ID */
	__le32 scan_id;
	/* Scan requestor ID */
	__le32 scan_req_id;
	/* VDEV id(interface) that is requesting scan */
	__le32 vdev_id;
	/* Scan Priority, input to scan scheduler */
	__le32 scan_priority;
	/* Scan events subscription */
	__le32 notify_scan_events;
	/* dwell time in msec on active channels */
	__le32 dwell_time_active;
	/* dwell time in msec on passive channels */
	__le32 dwell_time_passive;
	/*
	 * min time in msec on the BSS channel,only valid if atleast one
	 * VDEV is active
	 */
	__le32 min_rest_time;
	/*
	 * max rest time in msec on the BSS channel,only valid if at least
	 * one VDEV is active
	 */
	/*
	 * the scanner will rest on the bss channel at least min_rest_time
	 * after min_rest_time the scanner will start checking for tx/rx
	 * activity on all VDEVs. if there is no activity the scanner will
	 * switch to off channel. if there is activity the scanner will let
	 * the radio on the bss channel until max_rest_time expires.at
	 * max_rest_time scanner will switch to off channel irrespective of
	 * activity. activity is determined by the idle_time parameter.
	 */
	__le32 max_rest_time;
	/*
	 * time before sending next set of probe requests.
	 * The scanner keeps repeating probe requests transmission with
	 * period specified by repeat_probe_time.
	 * The number of probe requests specified depends on the ssid_list
	 * and bssid_list
	 */
	__le32 repeat_probe_time;
	/* time in msec between 2 consequetive probe requests with in a set. */
	__le32 probe_spacing_time;
	/*
	 * data inactivity time in msec on bss channel that will be used by
	 * scanner for measuring the inactivity.
	 */
	__le32 idle_time;
	/* maximum time in msec allowed for scan  */
	__le32 max_scan_time;
	/*
	 * delay in msec before sending first probe request after switching
	 * to a channel
	 */
	__le32 probe_delay;
	/* Scan control flags */
	__le32 scan_ctrl_flags;
} __packed;

struct wmi_start_scan_tlvs {
	/* TLV parameters. These includes channel list, ssid list, bssid list,
	 * extra ies.
	 */
	u8 tlvs[0];
} __packed;

struct wmi_start_scan_cmd {
	struct wmi_start_scan_common common;
	__le32 burst_duration_ms;
	struct wmi_start_scan_tlvs tlvs;
} __packed;

/* This is the definition from 10.X firmware branch */
struct wmi_10x_start_scan_cmd {
	struct wmi_start_scan_common common;
	struct wmi_start_scan_tlvs tlvs;
} __packed;

struct wmi_ssid_arg {
	int len;
	const u8 *ssid;
};

struct wmi_bssid_arg {
	const u8 *bssid;
};

struct wmi_start_scan_arg {
	u32 scan_id;
	u32 scan_req_id;
	u32 vdev_id;
	u32 scan_priority;
	u32 notify_scan_events;
	u32 dwell_time_active;
	u32 dwell_time_passive;
	u32 min_rest_time;
	u32 max_rest_time;
	u32 repeat_probe_time;
	u32 probe_spacing_time;
	u32 idle_time;
	u32 max_scan_time;
	u32 probe_delay;
	u32 scan_ctrl_flags;
	u32 burst_duration_ms;

	u32 ie_len;
	u32 n_channels;
	u32 n_ssids;
	u32 n_bssids;

	u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
	u16 channels[64];
	struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
	struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
};

/* scan control flags */

/* passively scan all channels including active channels */
#define WMI_SCAN_FLAG_PASSIVE        0x1
/* add wild card ssid probe request even though ssid_list is specified. */
#define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
/* add cck rates to rates/xrate ie for the generated probe request */
#define WMI_SCAN_ADD_CCK_RATES 0x4
/* add ofdm rates to rates/xrate ie for the generated probe request */
#define WMI_SCAN_ADD_OFDM_RATES 0x8
/* To enable indication of Chan load and Noise floor to host */
#define WMI_SCAN_CHAN_STAT_EVENT 0x10
/* Filter Probe request frames  */
#define WMI_SCAN_FILTER_PROBE_REQ 0x20
/* When set, DFS channels will not be scanned */
#define WMI_SCAN_BYPASS_DFS_CHN 0x40
/* Different FW scan engine may choose to bail out on errors.
 * Allow the driver to have influence over that.
 */
#define WMI_SCAN_CONTINUE_ON_ERROR 0x80

/* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
#define WMI_SCAN_CLASS_MASK 0xFF000000

enum wmi_stop_scan_type {
	WMI_SCAN_STOP_ONE	= 0x00000000, /* stop by scan_id */
	WMI_SCAN_STOP_VDEV_ALL	= 0x01000000, /* stop by vdev_id */
	WMI_SCAN_STOP_ALL	= 0x04000000, /* stop all scans */
};

struct wmi_stop_scan_cmd {
	__le32 scan_req_id;
	__le32 scan_id;
	__le32 req_type;
	__le32 vdev_id;
} __packed;

struct wmi_stop_scan_arg {
	u32 req_id;
	enum wmi_stop_scan_type req_type;
	union {
		u32 scan_id;
		u32 vdev_id;
	} u;
};

struct wmi_scan_chan_list_cmd {
	__le32 num_scan_chans;
	struct wmi_channel chan_info[0];
} __packed;

struct wmi_scan_chan_list_arg {
	u32 n_channels;
	struct wmi_channel_arg *channels;
};

enum wmi_bss_filter {
	WMI_BSS_FILTER_NONE = 0,        /* no beacons forwarded */
	WMI_BSS_FILTER_ALL,             /* all beacons forwarded */
	WMI_BSS_FILTER_PROFILE,         /* only beacons matching profile */
	WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
	WMI_BSS_FILTER_CURRENT_BSS,     /* only beacons matching current BSS */
	WMI_BSS_FILTER_ALL_BUT_BSS,     /* all but beacons matching BSS */
	WMI_BSS_FILTER_PROBED_SSID,     /* beacons matching probed ssid */
	WMI_BSS_FILTER_LAST_BSS,        /* marker only */
};

enum wmi_scan_event_type {
	WMI_SCAN_EVENT_STARTED              = BIT(0),
	WMI_SCAN_EVENT_COMPLETED            = BIT(1),
	WMI_SCAN_EVENT_BSS_CHANNEL          = BIT(2),
	WMI_SCAN_EVENT_FOREIGN_CHANNEL      = BIT(3),
	WMI_SCAN_EVENT_DEQUEUED             = BIT(4),
	/* possibly by high-prio scan */
	WMI_SCAN_EVENT_PREEMPTED            = BIT(5),
	WMI_SCAN_EVENT_START_FAILED         = BIT(6),
	WMI_SCAN_EVENT_RESTARTED            = BIT(7),
	WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),
	WMI_SCAN_EVENT_MAX                  = BIT(15),
};

enum wmi_scan_completion_reason {
	WMI_SCAN_REASON_COMPLETED,
	WMI_SCAN_REASON_CANCELLED,
	WMI_SCAN_REASON_PREEMPTED,
	WMI_SCAN_REASON_TIMEDOUT,
	WMI_SCAN_REASON_INTERNAL_FAILURE,
	WMI_SCAN_REASON_MAX,
};

struct wmi_scan_event {
	__le32 event_type; /* %WMI_SCAN_EVENT_ */
	__le32 reason; /* %WMI_SCAN_REASON_ */
	__le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
	__le32 scan_req_id;
	__le32 scan_id;
	__le32 vdev_id;
} __packed;

/*
 * This defines how much headroom is kept in the
 * receive frame between the descriptor and the
 * payload, in order for the WMI PHY error and
 * management handler to insert header contents.
 *
 * This is in bytes.
 */
#define WMI_MGMT_RX_HDR_HEADROOM    52

/*
 * This event will be used for sending scan results
 * as well as rx mgmt frames to the host. The rx buffer
 * will be sent as part of this WMI event. It would be a
 * good idea to pass all the fields in the RX status
 * descriptor up to the host.
 */
struct wmi_mgmt_rx_hdr_v1 {
	__le32 channel;
	__le32 snr;
	__le32 rate;
	__le32 phy_mode;
	__le32 buf_len;
	__le32 status; /* %WMI_RX_STATUS_ */
} __packed;

struct wmi_mgmt_rx_hdr_v2 {
	struct wmi_mgmt_rx_hdr_v1 v1;
	__le32 rssi_ctl[4];
} __packed;

struct wmi_mgmt_rx_event_v1 {
	struct wmi_mgmt_rx_hdr_v1 hdr;
	u8 buf[0];
} __packed;

struct wmi_mgmt_rx_event_v2 {
	struct wmi_mgmt_rx_hdr_v2 hdr;
	u8 buf[0];
} __packed;

struct wmi_10_4_mgmt_rx_hdr {
	__le32 channel;
	__le32 snr;
	    u8 rssi_ctl[4];
	__le32 rate;
	__le32 phy_mode;
	__le32 buf_len;
	__le32 status;
} __packed;

struct wmi_10_4_mgmt_rx_event {
	struct wmi_10_4_mgmt_rx_hdr hdr;
	u8 buf[0];
} __packed;

struct wmi_mgmt_rx_ext_info {
	__le64 rx_mac_timestamp;
} __packed __aligned(4);

#define WMI_RX_STATUS_OK			0x00
#define WMI_RX_STATUS_ERR_CRC			0x01
#define WMI_RX_STATUS_ERR_DECRYPT		0x08
#define WMI_RX_STATUS_ERR_MIC			0x10
#define WMI_RX_STATUS_ERR_KEY_CACHE_MISS	0x20
/* Extension data at the end of mgmt frame */
#define WMI_RX_STATUS_EXT_INFO		0x40

#define PHY_ERROR_GEN_SPECTRAL_SCAN		0x26
#define PHY_ERROR_GEN_FALSE_RADAR_EXT		0x24
#define PHY_ERROR_GEN_RADAR			0x05

#define PHY_ERROR_10_4_RADAR_MASK               0x4
#define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK       0x4000000

enum phy_err_type {
	PHY_ERROR_UNKNOWN,
	PHY_ERROR_SPECTRAL_SCAN,
	PHY_ERROR_FALSE_RADAR_EXT,
	PHY_ERROR_RADAR
};

struct wmi_phyerr {
	__le32 tsf_timestamp;
	__le16 freq1;
	__le16 freq2;
	u8 rssi_combined;
	u8 chan_width_mhz;
	u8 phy_err_code;
	u8 rsvd0;
	__le32 rssi_chains[4];
	__le16 nf_chains[4];
	__le32 buf_len;
	u8 buf[0];
} __packed;

struct wmi_phyerr_event {
	__le32 num_phyerrs;
	__le32 tsf_l32;
	__le32 tsf_u32;
	struct wmi_phyerr phyerrs[0];
} __packed;

struct wmi_10_4_phyerr_event {
	__le32 tsf_l32;
	__le32 tsf_u32;
	__le16 freq1;
	__le16 freq2;
	u8 rssi_combined;
	u8 chan_width_mhz;
	u8 phy_err_code;
	u8 rsvd0;
	__le32 rssi_chains[4];
	__le16 nf_chains[4];
	__le32 phy_err_mask[2];
	__le32 tsf_timestamp;
	__le32 buf_len;
	u8 buf[0];
} __packed;

#define PHYERR_TLV_SIG				0xBB
#define PHYERR_TLV_TAG_SEARCH_FFT_REPORT	0xFB
#define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY	0xF8
#define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT	0xF9

struct phyerr_radar_report {
	__le32 reg0; /* RADAR_REPORT_REG0_* */
	__le32 reg1; /* RADAR_REPORT_REG1_* */
} __packed;

#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK		0x80000000
#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB		31

#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK	0x40000000
#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB	30

#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK		0x3FF00000
#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB		20

#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK		0x000F0000
#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB		16

#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK		0x0000FC00
#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB		10

#define RADAR_REPORT_REG0_PULSE_SIDX_MASK		0x000003FF
#define RADAR_REPORT_REG0_PULSE_SIDX_LSB		0

#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK	0x80000000
#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB	31

#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK	0x7F000000
#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB		24

#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK	0x00FF0000
#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB	16

#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK		0x0000FF00
#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB		8

#define RADAR_REPORT_REG1_PULSE_DUR_MASK		0x000000FF
#define RADAR_REPORT_REG1_PULSE_DUR_LSB			0

struct phyerr_fft_report {
	__le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
	__le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
} __packed;

#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK	0xFF800000
#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB	23

#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK		0x007FC000
#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB		14

#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK		0x00003000
#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB		12

#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK		0x00000FFF
#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB		0

#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK		0xFC000000
#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB		26

#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK		0x03FC0000
#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB		18

#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK		0x0003FF00
#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB		8

#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK	0x000000FF
#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB	0

struct phyerr_tlv {
	__le16 len;
	u8 tag;
	u8 sig;
} __packed;

#define DFS_RSSI_POSSIBLY_FALSE			50
#define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE	40

struct wmi_mgmt_tx_hdr {
	__le32 vdev_id;
	struct wmi_mac_addr peer_macaddr;
	__le32 tx_rate;
	__le32 tx_power;
	__le32 buf_len;
} __packed;

struct wmi_mgmt_tx_cmd {
	struct wmi_mgmt_tx_hdr hdr;
	u8 buf[0];
} __packed;

struct wmi_echo_event {
	__le32 value;
} __packed;

struct wmi_echo_cmd {
	__le32 value;
} __packed;

struct wmi_pdev_set_regdomain_cmd {
	__le32 reg_domain;
	__le32 reg_domain_2G;
	__le32 reg_domain_5G;
	__le32 conformance_test_limit_2G;
	__le32 conformance_test_limit_5G;
} __packed;

enum wmi_dfs_region {
	/* Uninitialized dfs domain */
	WMI_UNINIT_DFS_DOMAIN = 0,

	/* FCC3 dfs domain */
	WMI_FCC_DFS_DOMAIN = 1,

	/* ETSI dfs domain */
	WMI_ETSI_DFS_DOMAIN = 2,

	/*Japan dfs domain */
	WMI_MKK4_DFS_DOMAIN = 3,
};

struct wmi_pdev_set_regdomain_cmd_10x {
	__le32 reg_domain;
	__le32 reg_domain_2G;
	__le32 reg_domain_5G;
	__le32 conformance_test_limit_2G;
	__le32 conformance_test_limit_5G;

	/* dfs domain from wmi_dfs_region */
	__le32 dfs_domain;
} __packed;

/* Command to set/unset chip in quiet mode */
struct wmi_pdev_set_quiet_cmd {
	/* period in TUs */
	__le32 period;

	/* duration in TUs */
	__le32 duration;

	/* offset in TUs */
	__le32 next_start;

	/* enable/disable */
	__le32 enabled;
} __packed;

/*
 * 802.11g protection mode.
 */
enum ath10k_protmode {
	ATH10K_PROT_NONE     = 0,    /* no protection */
	ATH10K_PROT_CTSONLY  = 1,    /* CTS to self */
	ATH10K_PROT_RTSCTS   = 2,    /* RTS-CTS */
};

enum wmi_rtscts_profile {
	WMI_RTSCTS_FOR_NO_RATESERIES = 0,
	WMI_RTSCTS_FOR_SECOND_RATESERIES,
	WMI_RTSCTS_ACROSS_SW_RETRIES
};

#define WMI_RTSCTS_ENABLED		1
#define WMI_RTSCTS_SET_MASK		0x0f
#define WMI_RTSCTS_SET_LSB		0

#define WMI_RTSCTS_PROFILE_MASK		0xf0
#define WMI_RTSCTS_PROFILE_LSB		4

enum wmi_beacon_gen_mode {
	WMI_BEACON_STAGGERED_MODE = 0,
	WMI_BEACON_BURST_MODE = 1
};

enum wmi_csa_event_ies_present_flag {
	WMI_CSA_IE_PRESENT = 0x00000001,
	WMI_XCSA_IE_PRESENT = 0x00000002,
	WMI_WBW_IE_PRESENT = 0x00000004,
	WMI_CSWARP_IE_PRESENT = 0x00000008,
};

/* wmi CSA receive event from beacon frame */
struct wmi_csa_event {
	__le32 i_fc_dur;
	/* Bit 0-15: FC */
	/* Bit 16-31: DUR */
	struct wmi_mac_addr i_addr1;
	struct wmi_mac_addr i_addr2;
	__le32 csa_ie[2];
	__le32 xcsa_ie[2];
	__le32 wb_ie[2];
	__le32 cswarp_ie;
	__le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
} __packed;

/* the definition of different PDEV parameters */
#define PDEV_DEFAULT_STATS_UPDATE_PERIOD    500
#define VDEV_DEFAULT_STATS_UPDATE_PERIOD    500
#define PEER_DEFAULT_STATS_UPDATE_PERIOD    500

struct wmi_pdev_param_map {
	u32 tx_chain_mask;
	u32 rx_chain_mask;
	u32 txpower_limit2g;
	u32 txpower_limit5g;
	u32 txpower_scale;
	u32 beacon_gen_mode;
	u32 beacon_tx_mode;
	u32 resmgr_offchan_mode;
	u32 protection_mode;
	u32 dynamic_bw;
	u32 non_agg_sw_retry_th;
	u32 agg_sw_retry_th;
	u32 sta_kickout_th;
	u32 ac_aggrsize_scaling;
	u32 ltr_enable;
	u32 ltr_ac_latency_be;
	u32 ltr_ac_latency_bk;
	u32 ltr_ac_latency_vi;
	u32 ltr_ac_latency_vo;
	u32 ltr_ac_latency_timeout;
	u32 ltr_sleep_override;
	u32 ltr_rx_override;
	u32 ltr_tx_activity_timeout;
	u32 l1ss_enable;
	u32 dsleep_enable;
	u32 pcielp_txbuf_flush;
	u32 pcielp_txbuf_watermark;
	u32 pcielp_txbuf_tmo_en;
	u32 pcielp_txbuf_tmo_value;
	u32 pdev_stats_update_period;
	u32 vdev_stats_update_period;
	u32 peer_stats_update_period;
	u32 bcnflt_stats_update_period;
	u32 pmf_qos;
	u32 arp_ac_override;
	u32 dcs;
	u32 ani_enable;
	u32 ani_poll_period;
	u32 ani_listen_period;
	u32 ani_ofdm_level;
	u32 ani_cck_level;
	u32 dyntxchain;
	u32 proxy_sta;
	u32 idle_ps_config;
	u32 power_gating_sleep;
	u32 fast_channel_reset;
	u32 burst_dur;
	u32 burst_enable;
	u32 cal_period;
	u32 aggr_burst;
	u32 rx_decap_mode;
	u32 smart_antenna_default_antenna;
	u32 igmpmld_override;
	u32 igmpmld_tid;
	u32 antenna_gain;
	u32 rx_filter;
	u32 set_mcast_to_ucast_tid;
	u32 proxy_sta_mode;
	u32 set_mcast2ucast_mode;
	u32 set_mcast2ucast_buffer;
	u32 remove_mcast2ucast_buffer;
	u32 peer_sta_ps_statechg_enable;
	u32 igmpmld_ac_override;
	u32 block_interbss;
	u32 set_disable_reset_cmdid;
	u32 set_msdu_ttl_cmdid;
	u32 set_ppdu_duration_cmdid;
	u32 txbf_sound_period_cmdid;
	u32 set_promisc_mode_cmdid;
	u32 set_burst_mode_cmdid;
	u32 en_stats;
	u32 mu_group_policy;
	u32 noise_detection;
	u32 noise_threshold;
	u32 dpd_enable;
	u32 set_mcast_bcast_echo;
	u32 atf_strict_sch;
	u32 atf_sched_duration;
	u32 ant_plzn;
	u32 mgmt_retry_limit;
	u32 sensitivity_level;
	u32 signed_txpower_2g;
	u32 signed_txpower_5g;
	u32 enable_per_tid_amsdu;
	u32 enable_per_tid_ampdu;
	u32 cca_threshold;
	u32 rts_fixed_rate;
	u32 pdev_reset;
	u32 wapi_mbssid_offset;
	u32 arp_srcaddr;
	u32 arp_dstaddr;
	u32 enable_btcoex;
};

#define WMI_PDEV_PARAM_UNSUPPORTED 0

enum wmi_pdev_param {
	/* TX chain mask */
	WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
	/* RX chain mask */
	WMI_PDEV_PARAM_RX_CHAIN_MASK,
	/* TX power limit for 2G Radio */
	WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
	/* TX power limit for 5G Radio */
	WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
	/* TX power scale */
	WMI_PDEV_PARAM_TXPOWER_SCALE,
	/* Beacon generation mode . 0: host, 1: target   */
	WMI_PDEV_PARAM_BEACON_GEN_MODE,
	/* Beacon generation mode . 0: staggered 1: bursted   */
	WMI_PDEV_PARAM_BEACON_TX_MODE,
	/*
	 * Resource manager off chan mode .
	 * 0: turn off off chan mode. 1: turn on offchan mode
	 */
	WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
	/*
	 * Protection mode:
	 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
	 */
	WMI_PDEV_PARAM_PROTECTION_MODE,
	/*
	 * Dynamic bandwidth - 0: disable, 1: enable
	 *
	 * When enabled HW rate control tries different bandwidths when
	 * retransmitting frames.
	 */
	WMI_PDEV_PARAM_DYNAMIC_BW,
	/* Non aggregrate/ 11g sw retry threshold.0-disable */
	WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
	/* aggregrate sw retry threshold. 0-disable*/
	WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
	/* Station kickout threshold (non of consecutive failures).0-disable */
	WMI_PDEV_PARAM_STA_KICKOUT_TH,
	/* Aggerate size scaling configuration per AC */
	WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
	/* LTR enable */
	WMI_PDEV_PARAM_LTR_ENABLE,
	/* LTR latency for BE, in us */
	WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
	/* LTR latency for BK, in us */
	WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
	/* LTR latency for VI, in us */
	WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
	/* LTR latency for VO, in us  */
	WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
	/* LTR AC latency timeout, in ms */
	WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
	/* LTR platform latency override, in us */
	WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
	/* LTR-RX override, in us */
	WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
	/* Tx activity timeout for LTR, in us */
	WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
	/* L1SS state machine enable */
	WMI_PDEV_PARAM_L1SS_ENABLE,
	/* Deep sleep state machine enable */
	WMI_PDEV_PARAM_DSLEEP_ENABLE,
	/* RX buffering flush enable */
	WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
	/* RX buffering matermark */
	WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
	/* RX buffering timeout enable */
	WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
	/* RX buffering timeout value */
	WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
	/* pdev level stats update period in ms */
	WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
	/* vdev level stats update period in ms */
	WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
	/* peer level stats update period in ms */
	WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
	/* beacon filter status update period */
	WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
	/* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
	WMI_PDEV_PARAM_PMF_QOS,
	/* Access category on which ARP frames are sent */
	WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
	/* DCS configuration */
	WMI_PDEV_PARAM_DCS,
	/* Enable/Disable ANI on target */
	WMI_PDEV_PARAM_ANI_ENABLE,
	/* configure the ANI polling period */
	WMI_PDEV_PARAM_ANI_POLL_PERIOD,
	/* configure the ANI listening period */
	WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
	/* configure OFDM immunity level */
	WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
	/* configure CCK immunity level */
	WMI_PDEV_PARAM_ANI_CCK_LEVEL,
	/* Enable/Disable CDD for 1x1 STAs in rate control module */
	WMI_PDEV_PARAM_DYNTXCHAIN,
	/* Enable/Disable proxy STA */
	WMI_PDEV_PARAM_PROXY_STA,
	/* Enable/Disable low power state when all VDEVs are inactive/idle. */
	WMI_PDEV_PARAM_IDLE_PS_CONFIG,
	/* Enable/Disable power gating sleep */
	WMI_PDEV_PARAM_POWER_GATING_SLEEP,
};

enum wmi_10x_pdev_param {
	/* TX chian mask */
	WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
	/* RX chian mask */
	WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
	/* TX power limit for 2G Radio */
	WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
	/* TX power limit for 5G Radio */
	WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
	/* TX power scale */
	WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
	/* Beacon generation mode . 0: host, 1: target   */
	WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
	/* Beacon generation mode . 0: staggered 1: bursted   */
	WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
	/*
	 * Resource manager off chan mode .
	 * 0: turn off off chan mode. 1: turn on offchan mode
	 */
	WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
	/*
	 * Protection mode:
	 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
	 */
	WMI_10X_PDEV_PARAM_PROTECTION_MODE,
	/* Dynamic bandwidth 0: disable 1: enable */
	WMI_10X_PDEV_PARAM_DYNAMIC_BW,
	/* Non aggregrate/ 11g sw retry threshold.0-disable */
	WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
	/* aggregrate sw retry threshold. 0-disable*/
	WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
	/* Station kickout threshold (non of consecutive failures).0-disable */
	WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
	/* Aggerate size scaling configuration per AC */
	WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
	/* LTR enable */
	WMI_10X_PDEV_PARAM_LTR_ENABLE,
	/* LTR latency for BE, in us */
	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
	/* LTR latency for BK, in us */
	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
	/* LTR latency for VI, in us */
	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
	/* LTR latency for VO, in us  */
	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
	/* LTR AC latency timeout, in ms */
	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
	/* LTR platform latency override, in us */
	WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
	/* LTR-RX override, in us */
	WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
	/* Tx activity timeout for LTR, in us */
	WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
	/* L1SS state machine enable */
	WMI_10X_PDEV_PARAM_L1SS_ENABLE,
	/* Deep sleep state machine enable */
	WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
	/* pdev level stats update period in ms */
	WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
	/* vdev level stats update period in ms */
	WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
	/* peer level stats update period in ms */
	WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
	/* beacon filter status update period */
	WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
	/* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
	WMI_10X_PDEV_PARAM_PMF_QOS,
	/* Access category on which ARP and DHCP frames are sent */
	WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
	/* DCS configuration */
	WMI_10X_PDEV_PARAM_DCS,
	/* Enable/Disable ANI on target */
	WMI_10X_PDEV_PARAM_ANI_ENABLE,
	/* configure the ANI polling period */
	WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
	/* configure the ANI listening period */
	WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
	/* configure OFDM immunity level */
	WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
	/* configure CCK immunity level */
	WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
	/* Enable/Disable CDD for 1x1 STAs in rate control module */
	WMI_10X_PDEV_PARAM_DYNTXCHAIN,
	/* Enable/Disable Fast channel reset*/
	WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
	/* Set Bursting DUR */
	WMI_10X_PDEV_PARAM_BURST_DUR,
	/* Set Bursting Enable*/
	WMI_10X_PDEV_PARAM_BURST_ENABLE,

	/* following are available as of firmware 10.2 */
	WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
	WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
	WMI_10X_PDEV_PARAM_IGMPMLD_TID,
	WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
	WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
	WMI_10X_PDEV_PARAM_RX_FILTER,
	WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
	WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
	WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
	WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
	WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
	WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
	WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
	WMI_10X_PDEV_PARAM_CAL_PERIOD
};

enum wmi_10_4_pdev_param {
	WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
	WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
	WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
	WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
	WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
	WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
	WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
	WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
	WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
	WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
	WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
	WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
	WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
	WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
	WMI_10_4_PDEV_PARAM_LTR_ENABLE,
	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
	WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
	WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
	WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
	WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
	WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
	WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
	WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
	WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
	WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
	WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
	WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
	WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
	WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
	WMI_10_4_PDEV_PARAM_PMF_QOS,
	WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
	WMI_10_4_PDEV_PARAM_DCS,
	WMI_10_4_PDEV_PARAM_ANI_ENABLE,
	WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
	WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
	WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
	WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
	WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
	WMI_10_4_PDEV_PARAM_PROXY_STA,
	WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
	WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
	WMI_10_4_PDEV_PARAM_AGGR_BURST,
	WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
	WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
	WMI_10_4_PDEV_PARAM_BURST_DUR,
	WMI_10_4_PDEV_PARAM_BURST_ENABLE,
	WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
	WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
	WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
	WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
	WMI_10_4_PDEV_PARAM_RX_FILTER,
	WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
	WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
	WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
	WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
	WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
	WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
	WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
	WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
	WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
	WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
	WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
	WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
	WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
	WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
	WMI_10_4_PDEV_PARAM_EN_STATS,
	WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
	WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
	WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
	WMI_10_4_PDEV_PARAM_DPD_ENABLE,
	WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
	WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
	WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
	WMI_10_4_PDEV_PARAM_ANT_PLZN,
	WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
	WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
	WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
	WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
	WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
	WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
	WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
	WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
	WMI_10_4_PDEV_PARAM_CAL_PERIOD,
	WMI_10_4_PDEV_PARAM_PDEV_RESET,
	WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
	WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
	WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
	WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,
	WMI_10_4_PDEV_PARAM_RX_BATCHMODE,
	WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,
	WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
	WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
	WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
	WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
	WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY,
	WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,
};

struct wmi_pdev_set_param_cmd {
	__le32 param_id;
	__le32 param_value;
} __packed;

/* valid period is 1 ~ 60000ms, unit in millisecond */
#define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000

struct wmi_pdev_get_tpc_config_cmd {
	/* parameter   */
	__le32 param;
} __packed;

#define WMI_TPC_CONFIG_PARAM		1
#define WMI_TPC_RATE_MAX		160
#define WMI_TPC_TX_N_CHAIN		4
#define WMI_TPC_PREAM_TABLE_MAX		10
#define WMI_TPC_FLAG			3
#define WMI_TPC_BUF_SIZE		10

enum wmi_tpc_table_type {
	WMI_TPC_TABLE_TYPE_CDD = 0,
	WMI_TPC_TABLE_TYPE_STBC = 1,
	WMI_TPC_TABLE_TYPE_TXBF = 2,
};

enum wmi_tpc_config_event_flag {
	WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD	= 0x1,
	WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC	= 0x2,
	WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF	= 0x4,
};

struct wmi_pdev_tpc_config_event {
	__le32 reg_domain;
	__le32 chan_freq;
	__le32 phy_mode;
	__le32 twice_antenna_reduction;
	__le32 twice_max_rd_power;
	a_sle32 twice_antenna_gain;
	__le32 power_limit;
	__le32 rate_max;
	__le32 num_tx_chain;
	__le32 ctl;
	__le32 flags;
	s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
	s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
	s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
	s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
	u8 rates_array[WMI_TPC_RATE_MAX];
} __packed;

/* Transmit power scale factor. */
enum wmi_tp_scale {
	WMI_TP_SCALE_MAX    = 0,	/* no scaling (default) */
	WMI_TP_SCALE_50     = 1,	/* 50% of max (-3 dBm) */
	WMI_TP_SCALE_25     = 2,	/* 25% of max (-6 dBm) */
	WMI_TP_SCALE_12     = 3,	/* 12% of max (-9 dBm) */
	WMI_TP_SCALE_MIN    = 4,	/* min, but still on   */
	WMI_TP_SCALE_SIZE   = 5,	/* max num of enum     */
};

struct wmi_pdev_chanlist_update_event {
	/* number of channels */
	__le32 num_chan;
	/* array of channels */
	struct wmi_channel channel_list[1];
} __packed;

#define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)

struct wmi_debug_mesg_event {
	/* message buffer, NULL terminated */
	char bufp[WMI_MAX_DEBUG_MESG];
} __packed;

enum {
	/* P2P device */
	VDEV_SUBTYPE_P2PDEV = 0,
	/* P2P client */
	VDEV_SUBTYPE_P2PCLI,
	/* P2P GO */
	VDEV_SUBTYPE_P2PGO,
	/* BT3.0 HS */
	VDEV_SUBTYPE_BT,
};

struct wmi_pdev_set_channel_cmd {
	/* idnore power , only use flags , mode and freq */
	struct wmi_channel chan;
} __packed;

struct wmi_pdev_pktlog_enable_cmd {
	__le32 ev_bitmap;
} __packed;

/* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
#define WMI_DSCP_MAP_MAX    (64)
struct wmi_pdev_set_dscp_tid_map_cmd {
	/* map indicating DSCP to TID conversion */
	__le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
} __packed;

enum mcast_bcast_rate_id {
	WMI_SET_MCAST_RATE,
	WMI_SET_BCAST_RATE
};

struct mcast_bcast_rate {
	enum mcast_bcast_rate_id rate_id;
	__le32 rate;
} __packed;

struct wmi_wmm_params {
	__le32 cwmin;
	__le32 cwmax;
	__le32 aifs;
	__le32 txop;
	__le32 acm;
	__le32 no_ack;
} __packed;

struct wmi_pdev_set_wmm_params {
	struct wmi_wmm_params ac_be;
	struct wmi_wmm_params ac_bk;
	struct wmi_wmm_params ac_vi;
	struct wmi_wmm_params ac_vo;
} __packed;

struct wmi_wmm_params_arg {
	u32 cwmin;
	u32 cwmax;
	u32 aifs;
	u32 txop;
	u32 acm;
	u32 no_ack;
};

struct wmi_wmm_params_all_arg {
	struct wmi_wmm_params_arg ac_be;
	struct wmi_wmm_params_arg ac_bk;
	struct wmi_wmm_params_arg ac_vi;
	struct wmi_wmm_params_arg ac_vo;
};

struct wmi_pdev_stats_tx {
	/* Num HTT cookies queued to dispatch list */
	__le32 comp_queued;

	/* Num HTT cookies dispatched */
	__le32 comp_delivered;

	/* Num MSDU queued to WAL */
	__le32 msdu_enqued;

	/* Num MPDU queue to WAL */
	__le32 mpdu_enqued;

	/* Num MSDUs dropped by WMM limit */
	__le32 wmm_drop;

	/* Num Local frames queued */
	__le32 local_enqued;

	/* Num Local frames done */
	__le32 local_freed;

	/* Num queued to HW */
	__le32 hw_queued;

	/* Num PPDU reaped from HW */
	__le32 hw_reaped;

	/* Num underruns */
	__le32 underrun;

	/* Num PPDUs cleaned up in TX abort */
	__le32 tx_abort;

	/* Num MPDUs requed by SW */
	__le32 mpdus_requed;

	/* excessive retries */
	__le32 tx_ko;

	/* data hw rate code */
	__le32 data_rc;

	/* Scheduler self triggers */
	__le32 self_triggers;

	/* frames dropped due to excessive sw retries */
	__le32 sw_retry_failure;

	/* illegal rate phy errors  */
	__le32 illgl_rate_phy_err;

	/* wal pdev continuous xretry */
	__le32 pdev_cont_xretry;

	/* wal pdev continous xretry */
	__le32 pdev_tx_timeout;

	/* wal pdev resets  */
	__le32 pdev_resets;

	/* frames dropped due to non-availability of stateless TIDs */
	__le32 stateless_tid_alloc_failure;

	__le32 phy_underrun;

	/* MPDU is more than txop limit */
	__le32 txop_ovf;
} __packed;

struct wmi_10_4_pdev_stats_tx {
	/* Num HTT cookies queued to dispatch list */
	__le32 comp_queued;

	/* Num HTT cookies dispatched */
	__le32 comp_delivered;

	/* Num MSDU queued to WAL */
	__le32 msdu_enqued;

	/* Num MPDU queue to WAL */
	__le32 mpdu_enqued;

	/* Num MSDUs dropped by WMM limit */
	__le32 wmm_drop;

	/* Num Local frames queued */
	__le32 local_enqued;

	/* Num Local frames done */
	__le32 local_freed;

	/* Num queued to HW */
	__le32 hw_queued;

	/* Num PPDU reaped from HW */
	__le32 hw_reaped;

	/* Num underruns */
	__le32 underrun;

	/* HW Paused. */
	__le32  hw_paused;

	/* Num PPDUs cleaned up in TX abort */
	__le32 tx_abort;

	/* Num MPDUs requed by SW */
	__le32 mpdus_requed;

	/* excessive retries */
	__le32 tx_ko;

	/* data hw rate code */
	__le32 data_rc;

	/* Scheduler self triggers */
	__le32 self_triggers;

	/* frames dropped due to excessive sw retries */
	__le32 sw_retry_failure;

	/* illegal rate phy errors  */
	__le32 illgl_rate_phy_err;

	/* wal pdev continuous xretry */
	__le32 pdev_cont_xretry;

	/* wal pdev tx timeouts */
	__le32 pdev_tx_timeout;

	/* wal pdev resets  */
	__le32 pdev_resets;

	/* frames dropped due to non-availability of stateless TIDs */
	__le32 stateless_tid_alloc_failure;

	__le32 phy_underrun;

	/* MPDU is more than txop limit */
	__le32 txop_ovf;

	/* Number of Sequences posted */
	__le32 seq_posted;

	/* Number of Sequences failed queueing */
	__le32 seq_failed_queueing;

	/* Number of Sequences completed */
	__le32 seq_completed;

	/* Number of Sequences restarted */
	__le32 seq_restarted;

	/* Number of MU Sequences posted */
	__le32 mu_seq_posted;

	/* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
	__le32 mpdus_sw_flush;

	/* Num MPDUs filtered by HW, all filter condition (TTL expired) */
	__le32 mpdus_hw_filter;

	/* Num MPDUs truncated by PDG
	 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
	 */
	__le32 mpdus_truncated;

	/* Num MPDUs that was tried but didn't receive ACK or BA */
	__le32 mpdus_ack_failed;

	/* Num MPDUs that was dropped due to expiry. */
	__le32 mpdus_expired;
} __packed;

struct wmi_pdev_stats_rx {
	/* Cnts any change in ring routing mid-ppdu */
	__le32 mid_ppdu_route_change;

	/* Total number of statuses processed */
	__le32 status_rcvd;

	/* Extra frags on rings 0-3 */
	__le32 r0_frags;
	__le32 r1_frags;
	__le32 r2_frags;
	__le32 r3_frags;

	/* MSDUs / MPDUs delivered to HTT */
	__le32 htt_msdus;
	__le32 htt_mpdus;

	/* MSDUs / MPDUs delivered to local stack */
	__le32 loc_msdus;
	__le32 loc_mpdus;

	/* AMSDUs that have more MSDUs than the status ring size */
	__le32 oversize_amsdu;

	/* Number of PHY errors */
	__le32 phy_errs;

	/* Number of PHY errors drops */
	__le32 phy_err_drop;

	/* Number of mpdu errors - FCS, MIC, ENC etc. */
	__le32 mpdu_errs;
} __packed;

struct wmi_pdev_stats_peer {
	/* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
	__le32 dummy;
} __packed;

enum wmi_stats_id {
	WMI_STAT_PEER = BIT(0),
	WMI_STAT_AP = BIT(1),
	WMI_STAT_PDEV = BIT(2),
	WMI_STAT_VDEV = BIT(3),
	WMI_STAT_BCNFLT = BIT(4),
	WMI_STAT_VDEV_RATE = BIT(5),
};

enum wmi_10_4_stats_id {
	WMI_10_4_STAT_PEER		= BIT(0),
	WMI_10_4_STAT_AP		= BIT(1),
	WMI_10_4_STAT_INST		= BIT(2),
	WMI_10_4_STAT_PEER_EXTD		= BIT(3),
};

struct wlan_inst_rssi_args {
	__le16 cfg_retry_count;
	__le16 retry_count;
};

struct wmi_request_stats_cmd {
	__le32 stats_id;

	__le32 vdev_id;

	/* peer MAC address */
	struct wmi_mac_addr peer_macaddr;

	/* Instantaneous RSSI arguments */
	struct wlan_inst_rssi_args inst_rssi_args;
} __packed;

/* Suspend option */
enum {
	/* suspend */
	WMI_PDEV_SUSPEND,

	/* suspend and disable all interrupts */
	WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
};

struct wmi_pdev_suspend_cmd {
	/* suspend option sent to target */
	__le32 suspend_opt;
} __packed;

struct wmi_stats_event {
	__le32 stats_id; /* WMI_STAT_ */
	/*
	 * number of pdev stats event structures
	 * (wmi_pdev_stats) 0 or 1
	 */
	__le32 num_pdev_stats;
	/*
	 * number of vdev stats event structures
	 * (wmi_vdev_stats) 0 or max vdevs
	 */
	__le32 num_vdev_stats;
	/*
	 * number of peer stats event structures
	 * (wmi_peer_stats) 0 or max peers
	 */
	__le32 num_peer_stats;
	__le32 num_bcnflt_stats;
	/*
	 * followed by
	 *   num_pdev_stats * size of(struct wmi_pdev_stats)
	 *   num_vdev_stats * size of(struct wmi_vdev_stats)
	 *   num_peer_stats * size of(struct wmi_peer_stats)
	 *
	 *  By having a zero sized array, the pointer to data area
	 *  becomes available without increasing the struct size
	 */
	u8 data[0];
} __packed;

struct wmi_10_2_stats_event {
	__le32 stats_id; /* %WMI_REQUEST_ */
	__le32 num_pdev_stats;
	__le32 num_pdev_ext_stats;
	__le32 num_vdev_stats;
	__le32 num_peer_stats;
	__le32 num_bcnflt_stats;
	u8 data[0];
} __packed;

/*
 * PDEV statistics
 * TODO: add all PDEV stats here
 */
struct wmi_pdev_stats_base {
	__le32 chan_nf;
	__le32 tx_frame_count; /* Cycles spent transmitting frames */
	__le32 rx_frame_count; /* Cycles spent receiving frames */
	__le32 rx_clear_count; /* Total channel busy time, evidently */
	__le32 cycle_count; /* Total on-channel time */
	__le32 phy_err_count;
	__le32 chan_tx_pwr;
} __packed;

struct wmi_pdev_stats {
	struct wmi_pdev_stats_base base;
	struct wmi_pdev_stats_tx tx;
	struct wmi_pdev_stats_rx rx;
	struct wmi_pdev_stats_peer peer;
} __packed;

struct wmi_pdev_stats_extra {
	__le32 ack_rx_bad;
	__le32 rts_bad;
	__le32 rts_good;
	__le32 fcs_bad;
	__le32 no_beacons;
	__le32 mib_int_count;
} __packed;

struct wmi_10x_pdev_stats {
	struct wmi_pdev_stats_base base;
	struct wmi_pdev_stats_tx tx;
	struct wmi_pdev_stats_rx rx;
	struct wmi_pdev_stats_peer peer;
	struct wmi_pdev_stats_extra extra;
} __packed;

struct wmi_pdev_stats_mem {
	__le32 dram_free;
	__le32 iram_free;
} __packed;

struct wmi_10_2_pdev_stats {
	struct wmi_pdev_stats_base base;
	struct wmi_pdev_stats_tx tx;
	__le32 mc_drop;
	struct wmi_pdev_stats_rx rx;
	__le32 pdev_rx_timeout;
	struct wmi_pdev_stats_mem mem;
	struct wmi_pdev_stats_peer peer;
	struct wmi_pdev_stats_extra extra;
} __packed;

struct wmi_10_4_pdev_stats {
	struct wmi_pdev_stats_base base;
	struct wmi_10_4_pdev_stats_tx tx;
	struct wmi_pdev_stats_rx rx;
	__le32 rx_ovfl_errs;
	struct wmi_pdev_stats_mem mem;
	__le32 sram_free_size;
	struct wmi_pdev_stats_extra extra;
} __packed;

/*
 * VDEV statistics
 * TODO: add all VDEV stats here
 */
struct wmi_vdev_stats {
	__le32 vdev_id;
} __packed;

/*
 * peer statistics.
 * TODO: add more stats
 */
struct wmi_peer_stats {
	struct wmi_mac_addr peer_macaddr;
	__le32 peer_rssi;
	__le32 peer_tx_rate;
} __packed;

struct wmi_10x_peer_stats {
	struct wmi_peer_stats old;
	__le32 peer_rx_rate;
} __packed;

struct wmi_10_2_peer_stats {
	struct wmi_peer_stats old;
	__le32 peer_rx_rate;
	__le32 current_per;
	__le32 retries;
	__le32 tx_rate_count;
	__le32 max_4ms_frame_len;
	__le32 total_sub_frames;
	__le32 tx_bytes;
	__le32 num_pkt_loss_overflow[4];
	__le32 num_pkt_loss_excess_retry[4];
} __packed;

struct wmi_10_2_4_peer_stats {
	struct wmi_10_2_peer_stats common;
	__le32 peer_rssi_changed;
} __packed;

struct wmi_10_2_4_ext_peer_stats {
	struct wmi_10_2_peer_stats common;
	__le32 peer_rssi_changed;
	__le32 rx_duration;
} __packed;

struct wmi_10_4_peer_stats {
	struct wmi_mac_addr peer_macaddr;
	__le32 peer_rssi;
	__le32 peer_rssi_seq_num;
	__le32 peer_tx_rate;
	__le32 peer_rx_rate;
	__le32 current_per;
	__le32 retries;
	__le32 tx_rate_count;
	__le32 max_4ms_frame_len;
	__le32 total_sub_frames;
	__le32 tx_bytes;
	__le32 num_pkt_loss_overflow[4];
	__le32 num_pkt_loss_excess_retry[4];
	__le32 peer_rssi_changed;
} __packed;

struct wmi_10_4_peer_extd_stats {
	struct wmi_mac_addr peer_macaddr;
	__le32 inactive_time;
	__le32 peer_chain_rssi;
	__le32 rx_duration;
	__le32 reserved[10];
} __packed;

struct wmi_10_4_bss_bcn_stats {
	__le32 vdev_id;
	__le32 bss_bcns_dropped;
	__le32 bss_bcn_delivered;
} __packed;

struct wmi_10_4_bss_bcn_filter_stats {
	__le32 bcns_dropped;
	__le32 bcns_delivered;
	__le32 active_filters;
	struct wmi_10_4_bss_bcn_stats bss_stats;
} __packed;

struct wmi_10_2_pdev_ext_stats {
	__le32 rx_rssi_comb;
	__le32 rx_rssi[4];
	__le32 rx_mcs[10];
	__le32 tx_mcs[10];
	__le32 ack_rssi;
} __packed;

struct wmi_vdev_create_cmd {
	__le32 vdev_id;
	__le32 vdev_type;
	__le32 vdev_subtype;
	struct wmi_mac_addr vdev_macaddr;
} __packed;

enum wmi_vdev_type {
	WMI_VDEV_TYPE_AP      = 1,
	WMI_VDEV_TYPE_STA     = 2,
	WMI_VDEV_TYPE_IBSS    = 3,
	WMI_VDEV_TYPE_MONITOR = 4,
};

enum wmi_vdev_subtype {
	WMI_VDEV_SUBTYPE_NONE,
	WMI_VDEV_SUBTYPE_P2P_DEVICE,
	WMI_VDEV_SUBTYPE_P2P_CLIENT,
	WMI_VDEV_SUBTYPE_P2P_GO,
	WMI_VDEV_SUBTYPE_PROXY_STA,
	WMI_VDEV_SUBTYPE_MESH_11S,
	WMI_VDEV_SUBTYPE_MESH_NON_11S,
};

enum wmi_vdev_subtype_legacy {
	WMI_VDEV_SUBTYPE_LEGACY_NONE      = 0,
	WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV   = 1,
	WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI   = 2,
	WMI_VDEV_SUBTYPE_LEGACY_P2P_GO    = 3,
	WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,
};

enum wmi_vdev_subtype_10_2_4 {
	WMI_VDEV_SUBTYPE_10_2_4_NONE      = 0,
	WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV   = 1,
	WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI   = 2,
	WMI_VDEV_SUBTYPE_10_2_4_P2P_GO    = 3,
	WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,
	WMI_VDEV_SUBTYPE_10_2_4_MESH_11S  = 5,
};

enum wmi_vdev_subtype_10_4 {
	WMI_VDEV_SUBTYPE_10_4_NONE         = 0,
	WMI_VDEV_SUBTYPE_10_4_P2P_DEV      = 1,
	WMI_VDEV_SUBTYPE_10_4_P2P_CLI      = 2,
	WMI_VDEV_SUBTYPE_10_4_P2P_GO       = 3,
	WMI_VDEV_SUBTYPE_10_4_PROXY_STA    = 4,
	WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,
	WMI_VDEV_SUBTYPE_10_4_MESH_11S     = 6,
};

/* values for vdev_subtype */

/* values for vdev_start_request flags */
/*
 * Indicates that AP VDEV uses hidden ssid. only valid for
 *  AP/GO
 */
#define WMI_VDEV_START_HIDDEN_SSID  (1 << 0)
/*
 * Indicates if robust management frame/management frame
 *  protection is enabled. For GO/AP vdevs, it indicates that
 *  it may support station/client associations with RMF enabled.
 *  For STA/client vdevs, it indicates that sta will
 *  associate with AP with RMF enabled.
 */
#define WMI_VDEV_START_PMF_ENABLED  (1 << 1)

struct wmi_p2p_noa_descriptor {
	__le32 type_count; /* 255: continuous schedule, 0: reserved */
	__le32 duration;  /* Absent period duration in micro seconds */
	__le32 interval;   /* Absent period interval in micro seconds */
	__le32 start_time; /* 32 bit tsf time when in starts */
} __packed;

struct wmi_vdev_start_request_cmd {
	/* WMI channel */
	struct wmi_channel chan;
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;
	/* requestor id identifying the caller module */
	__le32 requestor_id;
	/* beacon interval from received beacon */
	__le32 beacon_interval;
	/* DTIM Period from the received beacon */
	__le32 dtim_period;
	/* Flags */
	__le32 flags;
	/* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
	struct wmi_ssid ssid;
	/* beacon/probe response xmit rate. Applicable for SoftAP. */
	__le32 bcn_tx_rate;
	/* beacon/probe response xmit power. Applicable for SoftAP. */
	__le32 bcn_tx_power;
	/* number of p2p NOA descriptor(s) from scan entry */
	__le32 num_noa_descriptors;
	/*
	 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
	 * During CAC, Our HW shouldn't ack ditected frames
	 */
	__le32 disable_hw_ack;
	/* actual p2p NOA descriptor from scan entry */
	struct wmi_p2p_noa_descriptor noa_descriptors[2];
} __packed;

struct wmi_vdev_restart_request_cmd {
	struct wmi_vdev_start_request_cmd vdev_start_request_cmd;
} __packed;

struct wmi_vdev_start_request_arg {
	u32 vdev_id;
	struct wmi_channel_arg channel;
	u32 bcn_intval;
	u32 dtim_period;
	u8 *ssid;
	u32 ssid_len;
	u32 bcn_tx_rate;
	u32 bcn_tx_power;
	bool disable_hw_ack;
	bool hidden_ssid;
	bool pmf_enabled;
};

struct wmi_vdev_delete_cmd {
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;
} __packed;

struct wmi_vdev_up_cmd {
	__le32 vdev_id;
	__le32 vdev_assoc_id;
	struct wmi_mac_addr vdev_bssid;
} __packed;

struct wmi_vdev_stop_cmd {
	__le32 vdev_id;
} __packed;

struct wmi_vdev_down_cmd {
	__le32 vdev_id;
} __packed;

struct wmi_vdev_standby_response_cmd {
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;
} __packed;

struct wmi_vdev_resume_response_cmd {
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;
} __packed;

struct wmi_vdev_set_param_cmd {
	__le32 vdev_id;
	__le32 param_id;
	__le32 param_value;
} __packed;

#define WMI_MAX_KEY_INDEX   3
#define WMI_MAX_KEY_LEN     32

#define WMI_KEY_PAIRWISE 0x00
#define WMI_KEY_GROUP    0x01
#define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */

struct wmi_key_seq_counter {
	__le32 key_seq_counter_l;
	__le32 key_seq_counter_h;
} __packed;

#define WMI_CIPHER_NONE     0x0 /* clear key */
#define WMI_CIPHER_WEP      0x1
#define WMI_CIPHER_TKIP     0x2
#define WMI_CIPHER_AES_OCB  0x3
#define WMI_CIPHER_AES_CCM  0x4
#define WMI_CIPHER_WAPI     0x5
#define WMI_CIPHER_CKIP     0x6
#define WMI_CIPHER_AES_CMAC 0x7

struct wmi_vdev_install_key_cmd {
	__le32 vdev_id;
	struct wmi_mac_addr peer_macaddr;
	__le32 key_idx;
	__le32 key_flags;
	__le32 key_cipher; /* %WMI_CIPHER_ */
	struct wmi_key_seq_counter key_rsc_counter;
	struct wmi_key_seq_counter key_global_rsc_counter;
	struct wmi_key_seq_counter key_tsc_counter;
	u8 wpi_key_rsc_counter[16];
	u8 wpi_key_tsc_counter[16];
	__le32 key_len;
	__le32 key_txmic_len;
	__le32 key_rxmic_len;

	/* contains key followed by tx mic followed by rx mic */
	u8 key_data[0];
} __packed;

struct wmi_vdev_install_key_arg {
	u32 vdev_id;
	const u8 *macaddr;
	u32 key_idx;
	u32 key_flags;
	u32 key_cipher;
	u32 key_len;
	u32 key_txmic_len;
	u32 key_rxmic_len;
	const void *key_data;
};

/*
 * vdev fixed rate format:
 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
 * - nss      - b5:b4 - ss number (0 mean 1ss)
 * - rate_mcs - b3:b0 - as below
 *    CCK:  0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
 *          4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
 *    OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
 *          4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
 *    HT/VHT: MCS index
 */

/* Preamble types to be used with VDEV fixed rate configuration */
enum wmi_rate_preamble {
	WMI_RATE_PREAMBLE_OFDM,
	WMI_RATE_PREAMBLE_CCK,
	WMI_RATE_PREAMBLE_HT,
	WMI_RATE_PREAMBLE_VHT,
};

#define ATH10K_HW_NSS(rate)		(1 + (((rate) >> 4) & 0x3))
#define ATH10K_HW_PREAMBLE(rate)	(((rate) >> 6) & 0x3)
#define ATH10K_HW_MCS_RATE(rate)	((rate) & 0xf)
#define ATH10K_HW_LEGACY_RATE(rate)	((rate) & 0x3f)
#define ATH10K_HW_BW(flags)		(((flags) >> 3) & 0x3)
#define ATH10K_HW_GI(flags)		(((flags) >> 5) & 0x1)
#define ATH10K_HW_RATECODE(rate, nss, preamble) \
	(((preamble) << 6) | ((nss) << 4) | (rate))

#define VHT_MCS_NUM     10
#define VHT_BW_NUM      4
#define VHT_NSS_NUM     4

/* Value to disable fixed rate setting */
#define WMI_FIXED_RATE_NONE    (0xff)

struct wmi_vdev_param_map {
	u32 rts_threshold;
	u32 fragmentation_threshold;
	u32 beacon_interval;
	u32 listen_interval;
	u32 multicast_rate;
	u32 mgmt_tx_rate;
	u32 slot_time;
	u32 preamble;
	u32 swba_time;
	u32 wmi_vdev_stats_update_period;
	u32 wmi_vdev_pwrsave_ageout_time;
	u32 wmi_vdev_host_swba_interval;
	u32 dtim_period;
	u32 wmi_vdev_oc_scheduler_air_time_limit;
	u32 wds;
	u32 atim_window;
	u32 bmiss_count_max;
	u32 bmiss_first_bcnt;
	u32 bmiss_final_bcnt;
	u32 feature_wmm;
	u32 chwidth;
	u32 chextoffset;
	u32 disable_htprotection;
	u32 sta_quickkickout;
	u32 mgmt_rate;
	u32 protection_mode;
	u32 fixed_rate;
	u32 sgi;
	u32 ldpc;
	u32 tx_stbc;
	u32 rx_stbc;
	u32 intra_bss_fwd;
	u32 def_keyid;
	u32 nss;
	u32 bcast_data_rate;
	u32 mcast_data_rate;
	u32 mcast_indicate;
	u32 dhcp_indicate;
	u32 unknown_dest_indicate;
	u32 ap_keepalive_min_idle_inactive_time_secs;
	u32 ap_keepalive_max_idle_inactive_time_secs;
	u32 ap_keepalive_max_unresponsive_time_secs;
	u32 ap_enable_nawds;
	u32 mcast2ucast_set;
	u32 enable_rtscts;
	u32 txbf;
	u32 packet_powersave;
	u32 drop_unencry;
	u32 tx_encap_type;
	u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
	u32 rc_num_retries;
	u32 cabq_maxdur;
	u32 mfptest_set;
	u32 rts_fixed_rate;
	u32 vht_sgimask;
	u32 vht80_ratemask;
	u32 early_rx_adjust_enable;
	u32 early_rx_tgt_bmiss_num;
	u32 early_rx_bmiss_sample_cycle;
	u32 early_rx_slop_step;
	u32 early_rx_init_slop;
	u32 early_rx_adjust_pause;
	u32 proxy_sta;
	u32 meru_vc;
	u32 rx_decap_type;
	u32 bw_nss_ratemask;
	u32 inc_tsf;
	u32 dec_tsf;
};

#define WMI_VDEV_PARAM_UNSUPPORTED 0

/* the definition of different VDEV parameters */
enum wmi_vdev_param {
	/* RTS Threshold */
	WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
	/* Fragmentation threshold */
	WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
	/* beacon interval in TUs */
	WMI_VDEV_PARAM_BEACON_INTERVAL,
	/* Listen interval in TUs */
	WMI_VDEV_PARAM_LISTEN_INTERVAL,
	/* multicast rate in Mbps */
	WMI_VDEV_PARAM_MULTICAST_RATE,
	/* management frame rate in Mbps */
	WMI_VDEV_PARAM_MGMT_TX_RATE,
	/* slot time (long vs short) */
	WMI_VDEV_PARAM_SLOT_TIME,
	/* preamble (long vs short) */
	WMI_VDEV_PARAM_PREAMBLE,
	/* SWBA time (time before tbtt in msec) */
	WMI_VDEV_PARAM_SWBA_TIME,
	/* time period for updating VDEV stats */
	WMI_VDEV_STATS_UPDATE_PERIOD,
	/* age out time in msec for frames queued for station in power save */
	WMI_VDEV_PWRSAVE_AGEOUT_TIME,
	/*
	 * Host SWBA interval (time in msec before tbtt for SWBA event
	 * generation).
	 */
	WMI_VDEV_HOST_SWBA_INTERVAL,
	/* DTIM period (specified in units of num beacon intervals) */
	WMI_VDEV_PARAM_DTIM_PERIOD,
	/*
	 * scheduler air time limit for this VDEV. used by off chan
	 * scheduler.
	 */
	WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
	/* enable/dsiable WDS for this VDEV  */
	WMI_VDEV_PARAM_WDS,
	/* ATIM Window */
	WMI_VDEV_PARAM_ATIM_WINDOW,
	/* BMISS max */
	WMI_VDEV_PARAM_BMISS_COUNT_MAX,
	/* BMISS first time */
	WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
	/* BMISS final time */
	WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
	/* WMM enables/disabled */
	WMI_VDEV_PARAM_FEATURE_WMM,
	/* Channel width */
	WMI_VDEV_PARAM_CHWIDTH,
	/* Channel Offset */
	WMI_VDEV_PARAM_CHEXTOFFSET,
	/* Disable HT Protection */
	WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
	/* Quick STA Kickout */
	WMI_VDEV_PARAM_STA_QUICKKICKOUT,
	/* Rate to be used with Management frames */
	WMI_VDEV_PARAM_MGMT_RATE,
	/* Protection Mode */
	WMI_VDEV_PARAM_PROTECTION_MODE,
	/* Fixed rate setting */
	WMI_VDEV_PARAM_FIXED_RATE,
	/* Short GI Enable/Disable */
	WMI_VDEV_PARAM_SGI,
	/* Enable LDPC */
	WMI_VDEV_PARAM_LDPC,
	/* Enable Tx STBC */
	WMI_VDEV_PARAM_TX_STBC,
	/* Enable Rx STBC */
	WMI_VDEV_PARAM_RX_STBC,
	/* Intra BSS forwarding  */
	WMI_VDEV_PARAM_INTRA_BSS_FWD,
	/* Setting Default xmit key for Vdev */
	WMI_VDEV_PARAM_DEF_KEYID,
	/* NSS width */
	WMI_VDEV_PARAM_NSS,
	/* Set the custom rate for the broadcast data frames */
	WMI_VDEV_PARAM_BCAST_DATA_RATE,
	/* Set the custom rate (rate-code) for multicast data frames */
	WMI_VDEV_PARAM_MCAST_DATA_RATE,
	/* Tx multicast packet indicate Enable/Disable */
	WMI_VDEV_PARAM_MCAST_INDICATE,
	/* Tx DHCP packet indicate Enable/Disable */
	WMI_VDEV_PARAM_DHCP_INDICATE,
	/* Enable host inspection of Tx unicast packet to unknown destination */
	WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,

	/* The minimum amount of time AP begins to consider STA inactive */
	WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,

	/*
	 * An associated STA is considered inactive when there is no recent
	 * TX/RX activity and no downlink frames are buffered for it. Once a
	 * STA exceeds the maximum idle inactive time, the AP will send an
	 * 802.11 data-null as a keep alive to verify the STA is still
	 * associated. If the STA does ACK the data-null, or if the data-null
	 * is buffered and the STA does not retrieve it, the STA will be
	 * considered unresponsive
	 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
	 */
	WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,

	/*
	 * An associated STA is considered unresponsive if there is no recent
	 * TX/RX activity and downlink frames are buffered for it. Once a STA
	 * exceeds the maximum unresponsive time, the AP will send a
	 * WMI_STA_KICKOUT event to the host so the STA can be deleted.
	 */
	WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,

	/* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
	WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
	/* Enable/Disable RTS-CTS */
	WMI_VDEV_PARAM_ENABLE_RTSCTS,
	/* Enable TXBFee/er */
	WMI_VDEV_PARAM_TXBF,

	/* Set packet power save */
	WMI_VDEV_PARAM_PACKET_POWERSAVE,

	/*
	 * Drops un-encrypted packets if eceived in an encrypted connection
	 * otherwise forwards to host.
	 */
	WMI_VDEV_PARAM_DROP_UNENCRY,

	/*
	 * Set the encapsulation type for frames.
	 */
	WMI_VDEV_PARAM_TX_ENCAP_TYPE,
};

/* the definition of different VDEV parameters */
enum wmi_10x_vdev_param {
	/* RTS Threshold */
	WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
	/* Fragmentation threshold */
	WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
	/* beacon interval in TUs */
	WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
	/* Listen interval in TUs */
	WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
	/* multicast rate in Mbps */
	WMI_10X_VDEV_PARAM_MULTICAST_RATE,
	/* management frame rate in Mbps */
	WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
	/* slot time (long vs short) */
	WMI_10X_VDEV_PARAM_SLOT_TIME,
	/* preamble (long vs short) */
	WMI_10X_VDEV_PARAM_PREAMBLE,
	/* SWBA time (time before tbtt in msec) */
	WMI_10X_VDEV_PARAM_SWBA_TIME,
	/* time period for updating VDEV stats */
	WMI_10X_VDEV_STATS_UPDATE_PERIOD,
	/* age out time in msec for frames queued for station in power save */
	WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
	/*
	 * Host SWBA interval (time in msec before tbtt for SWBA event
	 * generation).
	 */
	WMI_10X_VDEV_HOST_SWBA_INTERVAL,
	/* DTIM period (specified in units of num beacon intervals) */
	WMI_10X_VDEV_PARAM_DTIM_PERIOD,
	/*
	 * scheduler air time limit for this VDEV. used by off chan
	 * scheduler.
	 */
	WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
	/* enable/dsiable WDS for this VDEV  */
	WMI_10X_VDEV_PARAM_WDS,
	/* ATIM Window */
	WMI_10X_VDEV_PARAM_ATIM_WINDOW,
	/* BMISS max */
	WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
	/* WMM enables/disabled */
	WMI_10X_VDEV_PARAM_FEATURE_WMM,
	/* Channel width */
	WMI_10X_VDEV_PARAM_CHWIDTH,
	/* Channel Offset */
	WMI_10X_VDEV_PARAM_CHEXTOFFSET,
	/* Disable HT Protection */
	WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
	/* Quick STA Kickout */
	WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
	/* Rate to be used with Management frames */
	WMI_10X_VDEV_PARAM_MGMT_RATE,
	/* Protection Mode */
	WMI_10X_VDEV_PARAM_PROTECTION_MODE,
	/* Fixed rate setting */
	WMI_10X_VDEV_PARAM_FIXED_RATE,
	/* Short GI Enable/Disable */
	WMI_10X_VDEV_PARAM_SGI,
	/* Enable LDPC */
	WMI_10X_VDEV_PARAM_LDPC,
	/* Enable Tx STBC */
	WMI_10X_VDEV_PARAM_TX_STBC,
	/* Enable Rx STBC */
	WMI_10X_VDEV_PARAM_RX_STBC,
	/* Intra BSS forwarding  */
	WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
	/* Setting Default xmit key for Vdev */
	WMI_10X_VDEV_PARAM_DEF_KEYID,
	/* NSS width */
	WMI_10X_VDEV_PARAM_NSS,
	/* Set the custom rate for the broadcast data frames */
	WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
	/* Set the custom rate (rate-code) for multicast data frames */
	WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
	/* Tx multicast packet indicate Enable/Disable */
	WMI_10X_VDEV_PARAM_MCAST_INDICATE,
	/* Tx DHCP packet indicate Enable/Disable */
	WMI_10X_VDEV_PARAM_DHCP_INDICATE,
	/* Enable host inspection of Tx unicast packet to unknown destination */
	WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,

	/* The minimum amount of time AP begins to consider STA inactive */
	WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,

	/*
	 * An associated STA is considered inactive when there is no recent
	 * TX/RX activity and no downlink frames are buffered for it. Once a
	 * STA exceeds the maximum idle inactive time, the AP will send an
	 * 802.11 data-null as a keep alive to verify the STA is still
	 * associated. If the STA does ACK the data-null, or if the data-null
	 * is buffered and the STA does not retrieve it, the STA will be
	 * considered unresponsive
	 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
	 */
	WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,

	/*
	 * An associated STA is considered unresponsive if there is no recent
	 * TX/RX activity and downlink frames are buffered for it. Once a STA
	 * exceeds the maximum unresponsive time, the AP will send a
	 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted.
	 */
	WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,

	/* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
	WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,

	WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
	/* Enable/Disable RTS-CTS */
	WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,

	WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,

	/* following are available as of firmware 10.2 */
	WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,
	WMI_10X_VDEV_PARAM_CABQ_MAXDUR,
	WMI_10X_VDEV_PARAM_MFPTEST_SET,
	WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,
	WMI_10X_VDEV_PARAM_VHT_SGIMASK,
	WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
	WMI_10X_VDEV_PARAM_TSF_INCREMENT,
};

enum wmi_10_4_vdev_param {
	WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,
	WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
	WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
	WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
	WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
	WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
	WMI_10_4_VDEV_PARAM_SLOT_TIME,
	WMI_10_4_VDEV_PARAM_PREAMBLE,
	WMI_10_4_VDEV_PARAM_SWBA_TIME,
	WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
	WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
	WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
	WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
	WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
	WMI_10_4_VDEV_PARAM_WDS,
	WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
	WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
	WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
	WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
	WMI_10_4_VDEV_PARAM_FEATURE_WMM,
	WMI_10_4_VDEV_PARAM_CHWIDTH,
	WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
	WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
	WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
	WMI_10_4_VDEV_PARAM_MGMT_RATE,
	WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
	WMI_10_4_VDEV_PARAM_FIXED_RATE,
	WMI_10_4_VDEV_PARAM_SGI,
	WMI_10_4_VDEV_PARAM_LDPC,
	WMI_10_4_VDEV_PARAM_TX_STBC,
	WMI_10_4_VDEV_PARAM_RX_STBC,
	WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
	WMI_10_4_VDEV_PARAM_DEF_KEYID,
	WMI_10_4_VDEV_PARAM_NSS,
	WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
	WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
	WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
	WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
	WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
	WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
	WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
	WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
	WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
	WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
	WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
	WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
	WMI_10_4_VDEV_PARAM_TXBF,
	WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
	WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
	WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
	WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
	WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
	WMI_10_4_VDEV_PARAM_MFPTEST_SET,
	WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,
	WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
	WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
	WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
	WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
	WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
	WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
	WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
	WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
	WMI_10_4_VDEV_PARAM_PROXY_STA,
	WMI_10_4_VDEV_PARAM_MERU_VC,
	WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
	WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
	WMI_10_4_VDEV_PARAM_SENSOR_AP,
	WMI_10_4_VDEV_PARAM_BEACON_RATE,
	WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS,
	WMI_10_4_VDEV_PARAM_STA_KICKOUT,
	WMI_10_4_VDEV_PARAM_CAPABILITIES,
	WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
	WMI_10_4_VDEV_PARAM_RX_FILTER,
	WMI_10_4_VDEV_PARAM_MGMT_TX_POWER,
	WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY,
	WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS,
	WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
};

#define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
#define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
#define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
#define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)

#define WMI_TXBF_STS_CAP_OFFSET_LSB	4
#define WMI_TXBF_STS_CAP_OFFSET_MASK	0xf0
#define WMI_BF_SOUND_DIM_OFFSET_LSB	8
#define WMI_BF_SOUND_DIM_OFFSET_MASK	0xf00

/* slot time long */
#define WMI_VDEV_SLOT_TIME_LONG		0x1
/* slot time short */
#define WMI_VDEV_SLOT_TIME_SHORT	0x2
/* preablbe long */
#define WMI_VDEV_PREAMBLE_LONG		0x1
/* preablbe short */
#define WMI_VDEV_PREAMBLE_SHORT		0x2

enum wmi_start_event_param {
	WMI_VDEV_RESP_START_EVENT = 0,
	WMI_VDEV_RESP_RESTART_EVENT,
};

struct wmi_vdev_start_response_event {
	__le32 vdev_id;
	__le32 req_id;
	__le32 resp_type; /* %WMI_VDEV_RESP_ */
	__le32 status;
} __packed;

struct wmi_vdev_standby_req_event {
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;
} __packed;

struct wmi_vdev_resume_req_event {
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;
} __packed;

struct wmi_vdev_stopped_event {
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;
} __packed;

/*
 * common structure used for simple events
 * (stopped, resume_req, standby response)
 */
struct wmi_vdev_simple_event {
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;
} __packed;

/* VDEV start response status codes */
/* VDEV successfully started */
#define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS	0x0

/* requested VDEV not found */
#define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID	0x1

/* unsupported VDEV combination */
#define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED	0x2

/* TODO: please add more comments if you have in-depth information */
struct wmi_vdev_spectral_conf_cmd {
	__le32 vdev_id;

	/* number of fft samples to send (0 for infinite) */
	__le32 scan_count;
	__le32 scan_period;
	__le32 scan_priority;

	/* number of bins in the FFT: 2^(fft_size - bin_scale) */
	__le32 scan_fft_size;
	__le32 scan_gc_ena;
	__le32 scan_restart_ena;
	__le32 scan_noise_floor_ref;
	__le32 scan_init_delay;
	__le32 scan_nb_tone_thr;
	__le32 scan_str_bin_thr;
	__le32 scan_wb_rpt_mode;
	__le32 scan_rssi_rpt_mode;
	__le32 scan_rssi_thr;
	__le32 scan_pwr_format;

	/* rpt_mode: Format of FFT report to software for spectral scan
	 * triggered FFTs:
	 *	0: No FFT report (only spectral scan summary report)
	 *	1: 2-dword summary of metrics for each completed FFT + spectral
	 *	   scan	summary report
	 *	2: 2-dword summary of metrics for each completed FFT +
	 *	   1x- oversampled bins(in-band) per FFT + spectral scan summary
	 *	   report
	 *	3: 2-dword summary of metrics for each completed FFT +
	 *	   2x- oversampled bins	(all) per FFT + spectral scan summary
	 */
	__le32 scan_rpt_mode;
	__le32 scan_bin_scale;
	__le32 scan_dbm_adj;
	__le32 scan_chn_mask;
} __packed;

struct wmi_vdev_spectral_conf_arg {
	u32 vdev_id;
	u32 scan_count;
	u32 scan_period;
	u32 scan_priority;
	u32 scan_fft_size;
	u32 scan_gc_ena;
	u32 scan_restart_ena;
	u32 scan_noise_floor_ref;
	u32 scan_init_delay;
	u32 scan_nb_tone_thr;
	u32 scan_str_bin_thr;
	u32 scan_wb_rpt_mode;
	u32 scan_rssi_rpt_mode;
	u32 scan_rssi_thr;
	u32 scan_pwr_format;
	u32 scan_rpt_mode;
	u32 scan_bin_scale;
	u32 scan_dbm_adj;
	u32 scan_chn_mask;
};

#define WMI_SPECTRAL_ENABLE_DEFAULT              0
#define WMI_SPECTRAL_COUNT_DEFAULT               0
#define WMI_SPECTRAL_PERIOD_DEFAULT             35
#define WMI_SPECTRAL_PRIORITY_DEFAULT            1
#define WMI_SPECTRAL_FFT_SIZE_DEFAULT            7
#define WMI_SPECTRAL_GC_ENA_DEFAULT              1
#define WMI_SPECTRAL_RESTART_ENA_DEFAULT         0
#define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT   -96
#define WMI_SPECTRAL_INIT_DELAY_DEFAULT         80
#define WMI_SPECTRAL_NB_TONE_THR_DEFAULT        12
#define WMI_SPECTRAL_STR_BIN_THR_DEFAULT         8
#define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT         0
#define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT       0
#define WMI_SPECTRAL_RSSI_THR_DEFAULT         0xf0
#define WMI_SPECTRAL_PWR_FORMAT_DEFAULT          0
#define WMI_SPECTRAL_RPT_MODE_DEFAULT            2
#define WMI_SPECTRAL_BIN_SCALE_DEFAULT           1
#define WMI_SPECTRAL_DBM_ADJ_DEFAULT             1
#define WMI_SPECTRAL_CHN_MASK_DEFAULT            1

struct wmi_vdev_spectral_enable_cmd {
	__le32 vdev_id;
	__le32 trigger_cmd;
	__le32 enable_cmd;
} __packed;

#define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER  1
#define WMI_SPECTRAL_TRIGGER_CMD_CLEAR    2
#define WMI_SPECTRAL_ENABLE_CMD_ENABLE    1
#define WMI_SPECTRAL_ENABLE_CMD_DISABLE   2

/* Beacon processing related command and event structures */
struct wmi_bcn_tx_hdr {
	__le32 vdev_id;
	__le32 tx_rate;
	__le32 tx_power;
	__le32 bcn_len;
} __packed;

struct wmi_bcn_tx_cmd {
	struct wmi_bcn_tx_hdr hdr;
	u8 *bcn[0];
} __packed;

struct wmi_bcn_tx_arg {
	u32 vdev_id;
	u32 tx_rate;
	u32 tx_power;
	u32 bcn_len;
	const void *bcn;
};

enum wmi_bcn_tx_ref_flags {
	WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,
	WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,
};

/* TODO: It is unclear why "no antenna" works while any other seemingly valid
 * chainmask yields no beacons on the air at all.
 */
#define WMI_BCN_TX_REF_DEF_ANTENNA 0

struct wmi_bcn_tx_ref_cmd {
	__le32 vdev_id;
	__le32 data_len;
	/* physical address of the frame - dma pointer */
	__le32 data_ptr;
	/* id for host to track */
	__le32 msdu_id;
	/* frame ctrl to setup PPDU desc */
	__le32 frame_control;
	/* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
	__le32 flags;
	/* introduced in 10.2 */
	__le32 antenna_mask;
} __packed;

/* Beacon filter */
#define WMI_BCN_FILTER_ALL   0 /* Filter all beacons */
#define WMI_BCN_FILTER_NONE  1 /* Pass all beacons */
#define WMI_BCN_FILTER_RSSI  2 /* Pass Beacons RSSI >= RSSI threshold */
#define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
#define WMI_BCN_FILTER_SSID  4 /* Pass Beacons with matching SSID */

struct wmi_bcn_filter_rx_cmd {
	/* Filter ID */
	__le32 bcn_filter_id;
	/* Filter type - wmi_bcn_filter */
	__le32 bcn_filter;
	/* Buffer len */
	__le32 bcn_filter_len;
	/* Filter info (threshold, BSSID, RSSI) */
	u8 *bcn_filter_buf;
} __packed;

/* Capabilities and IEs to be passed to firmware */
struct wmi_bcn_prb_info {
	/* Capabilities */
	__le32 caps;
	/* ERP info */
	__le32 erp;
	/* Advanced capabilities */
	/* HT capabilities */
	/* HT Info */
	/* ibss_dfs */
	/* wpa Info */
	/* rsn Info */
	/* rrm info */
	/* ath_ext */
	/* app IE */
} __packed;

struct wmi_bcn_tmpl_cmd {
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;
	/* TIM IE offset from the beginning of the template. */
	__le32 tim_ie_offset;
	/* beacon probe capabilities and IEs */
	struct wmi_bcn_prb_info bcn_prb_info;
	/* beacon buffer length */
	__le32 buf_len;
	/* variable length data */
	u8 data[1];
} __packed;

struct wmi_prb_tmpl_cmd {
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;
	/* beacon probe capabilities and IEs */
	struct wmi_bcn_prb_info bcn_prb_info;
	/* beacon buffer length */
	__le32 buf_len;
	/* Variable length data */
	u8 data[1];
} __packed;

enum wmi_sta_ps_mode {
	/* enable power save for the given STA VDEV */
	WMI_STA_PS_MODE_DISABLED = 0,
	/* disable power save  for a given STA VDEV */
	WMI_STA_PS_MODE_ENABLED = 1,
};

struct wmi_sta_powersave_mode_cmd {
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;

	/*
	 * Power save mode
	 * (see enum wmi_sta_ps_mode)
	 */
	__le32 sta_ps_mode;
} __packed;

enum wmi_csa_offload_en {
	WMI_CSA_OFFLOAD_DISABLE = 0,
	WMI_CSA_OFFLOAD_ENABLE = 1,
};

struct wmi_csa_offload_enable_cmd {
	__le32 vdev_id;
	__le32 csa_offload_enable;
} __packed;

struct wmi_csa_offload_chanswitch_cmd {
	__le32 vdev_id;
	struct wmi_channel chan;
} __packed;

/*
 * This parameter controls the policy for retrieving frames from AP while the
 * STA is in sleep state.
 *
 * Only takes affect if the sta_ps_mode is enabled
 */
enum wmi_sta_ps_param_rx_wake_policy {
	/*
	 * Wake up when ever there is an  RX activity on the VDEV. In this mode
	 * the Power save SM(state machine) will come out of sleep by either
	 * sending null frame (or) a data frame (with PS==0) in response to TIM
	 * bit set in the received beacon frame from AP.
	 */
	WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,

	/*
	 * Here the power save state machine will not wakeup in response to TIM
	 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
	 * configuration setup by WMISET_PS_SET_UAPSD  WMI command.  When all
	 * access categories are delivery-enabled, the station will send a
	 * UAPSD trigger frame, otherwise it will send a PS-Poll.
	 */
	WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
};

/*
 * Number of tx frames/beacon  that cause the power save SM to wake up.
 *
 * Value 1 causes the SM to wake up for every TX. Value 0 has a special
 * meaning, It will cause the SM to never wake up. This is useful if you want
 * to keep the system to sleep all the time for some kind of test mode . host
 * can change this parameter any time.  It will affect at the next tx frame.
 */
enum wmi_sta_ps_param_tx_wake_threshold {
	WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
	WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,

	/*
	 * Values greater than one indicate that many TX attempts per beacon
	 * interval before the STA will wake up
	 */
};

/*
 * The maximum number of PS-Poll frames the FW will send in response to
 * traffic advertised in TIM before waking up (by sending a null frame with PS
 * = 0). Value 0 has a special meaning: there is no maximum count and the FW
 * will send as many PS-Poll as are necessary to retrieve buffered BU. This
 * parameter is used when the RX wake policy is
 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
 */
enum wmi_sta_ps_param_pspoll_count {
	WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
	/*
	 * Values greater than 0 indicate the maximum numer of PS-Poll frames
	 * FW will send before waking up.
	 */

	/* When u-APSD is enabled the firmware will be very reluctant to exit
	 * STA PS. This could result in very poor Rx performance with STA doing
	 * PS-Poll for each and every buffered frame. This value is a bit
	 * arbitrary.
	 */
	WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,
};

/*
 * This will include the delivery and trigger enabled state for every AC.
 * This is the negotiated state with AP. The host MLME needs to set this based
 * on AP capability and the state Set in the association request by the
 * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
 */
#define WMI_UAPSD_AC_TYPE_DELI 0
#define WMI_UAPSD_AC_TYPE_TRIG 1

#define WMI_UAPSD_AC_BIT_MASK(ac, type) \
	(type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1))

enum wmi_sta_ps_param_uapsd {
	WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
	WMI_STA_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
	WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
	WMI_STA_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
	WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
	WMI_STA_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
	WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
	WMI_STA_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
};

#define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX

struct wmi_sta_uapsd_auto_trig_param {
	__le32 wmm_ac;
	__le32 user_priority;
	__le32 service_interval;
	__le32 suspend_interval;
	__le32 delay_interval;
};

struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {
	__le32 vdev_id;
	struct wmi_mac_addr peer_macaddr;
	__le32 num_ac;
};

struct wmi_sta_uapsd_auto_trig_arg {
	u32 wmm_ac;
	u32 user_priority;
	u32 service_interval;
	u32 suspend_interval;
	u32 delay_interval;
};

enum wmi_sta_powersave_param {
	/*
	 * Controls how frames are retrievd from AP while STA is sleeping
	 *
	 * (see enum wmi_sta_ps_param_rx_wake_policy)
	 */
	WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,

	/*
	 * The STA will go active after this many TX
	 *
	 * (see enum wmi_sta_ps_param_tx_wake_threshold)
	 */
	WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,

	/*
	 * Number of PS-Poll to send before STA wakes up
	 *
	 * (see enum wmi_sta_ps_param_pspoll_count)
	 *
	 */
	WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,

	/*
	 * TX/RX inactivity time in msec before going to sleep.
	 *
	 * The power save SM will monitor tx/rx activity on the VDEV, if no
	 * activity for the specified msec of the parameter the Power save
	 * SM will go to sleep.
	 */
	WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,

	/*
	 * Set uapsd configuration.
	 *
	 * (see enum wmi_sta_ps_param_uapsd)
	 */
	WMI_STA_PS_PARAM_UAPSD = 4,
};

struct wmi_sta_powersave_param_cmd {
	__le32 vdev_id;
	__le32 param_id; /* %WMI_STA_PS_PARAM_ */
	__le32 param_value;
} __packed;

/* No MIMO power save */
#define WMI_STA_MIMO_PS_MODE_DISABLE
/* mimo powersave mode static*/
#define WMI_STA_MIMO_PS_MODE_STATIC
/* mimo powersave mode dynamic */
#define WMI_STA_MIMO_PS_MODE_DYNAMIC

struct wmi_sta_mimo_ps_mode_cmd {
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;
	/* mimo powersave mode as defined above */
	__le32 mimo_pwrsave_mode;
} __packed;

/* U-APSD configuration of peer station from (re)assoc request and TSPECs */
enum wmi_ap_ps_param_uapsd {
	WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
	WMI_AP_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
	WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
	WMI_AP_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
	WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
	WMI_AP_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
	WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
	WMI_AP_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
};

/* U-APSD maximum service period of peer station */
enum wmi_ap_ps_peer_param_max_sp {
	WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
	WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
	WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
	WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
	MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
};

/*
 * AP power save parameter
 * Set a power save specific parameter for a peer station
 */
enum wmi_ap_ps_peer_param {
	/* Set uapsd configuration for a given peer.
	 *
	 * Include the delivery and trigger enabled state for every AC.
	 * The host  MLME needs to set this based on AP capability and stations
	 * request Set in the association request  received from the station.
	 *
	 * Lower 8 bits of the value specify the UAPSD configuration.
	 *
	 * (see enum wmi_ap_ps_param_uapsd)
	 * The default value is 0.
	 */
	WMI_AP_PS_PEER_PARAM_UAPSD = 0,

	/*
	 * Set the service period for a UAPSD capable station
	 *
	 * The service period from wme ie in the (re)assoc request frame.
	 *
	 * (see enum wmi_ap_ps_peer_param_max_sp)
	 */
	WMI_AP_PS_PEER_PARAM_MAX_SP = 1,

	/* Time in seconds for aging out buffered frames for STA in PS */
	WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
};

struct wmi_ap_ps_peer_cmd {
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;

	/* peer MAC address */
	struct wmi_mac_addr peer_macaddr;

	/* AP powersave param (see enum wmi_ap_ps_peer_param) */
	__le32 param_id;

	/* AP powersave param value */
	__le32 param_value;
} __packed;

/* 128 clients = 4 words */
#define WMI_TIM_BITMAP_ARRAY_SIZE 4

struct wmi_tim_info {
	__le32 tim_len;
	__le32 tim_mcast;
	__le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
	__le32 tim_changed;
	__le32 tim_num_ps_pending;
} __packed;

struct wmi_tim_info_arg {
	__le32 tim_len;
	__le32 tim_mcast;
	const __le32 *tim_bitmap;
	__le32 tim_changed;
	__le32 tim_num_ps_pending;
} __packed;

/* Maximum number of NOA Descriptors supported */
#define WMI_P2P_MAX_NOA_DESCRIPTORS 4
#define WMI_P2P_OPPPS_ENABLE_BIT	BIT(0)
#define WMI_P2P_OPPPS_CTWINDOW_OFFSET	1
#define WMI_P2P_NOA_CHANGED_BIT	BIT(0)

struct wmi_p2p_noa_info {
	/* Bit 0 - Flag to indicate an update in NOA schedule
	 * Bits 7-1 - Reserved
	 */
	u8 changed;
	/* NOA index */
	u8 index;
	/* Bit 0 - Opp PS state of the AP
	 * Bits 1-7 - Ctwindow in TUs
	 */
	u8 ctwindow_oppps;
	/* Number of NOA descriptors */
	u8 num_descriptors;

	struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
} __packed;

struct wmi_bcn_info {
	struct wmi_tim_info tim_info;
	struct wmi_p2p_noa_info p2p_noa_info;
} __packed;

struct wmi_host_swba_event {
	__le32 vdev_map;
	struct wmi_bcn_info bcn_info[0];
} __packed;

struct wmi_10_2_4_bcn_info {
	struct wmi_tim_info tim_info;
	/* The 10.2.4 FW doesn't have p2p NOA info */
} __packed;

struct wmi_10_2_4_host_swba_event {
	__le32 vdev_map;
	struct wmi_10_2_4_bcn_info bcn_info[0];
} __packed;

/* 16 words = 512 client + 1 word = for guard */
#define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17

struct wmi_10_4_tim_info {
	__le32 tim_len;
	__le32 tim_mcast;
	__le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE];
	__le32 tim_changed;
	__le32 tim_num_ps_pending;
} __packed;

#define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1

struct wmi_10_4_p2p_noa_info {
	/* Bit 0 - Flag to indicate an update in NOA schedule
	 * Bits 7-1 - Reserved
	 */
	u8 changed;
	/* NOA index */
	u8 index;
	/* Bit 0 - Opp PS state of the AP
	 * Bits 1-7 - Ctwindow in TUs
	 */
	u8 ctwindow_oppps;
	/* Number of NOA descriptors */
	u8 num_descriptors;

	struct wmi_p2p_noa_descriptor
		noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS];
} __packed;

struct wmi_10_4_bcn_info {
	struct wmi_10_4_tim_info tim_info;
	struct wmi_10_4_p2p_noa_info p2p_noa_info;
} __packed;

struct wmi_10_4_host_swba_event {
	__le32 vdev_map;
	struct wmi_10_4_bcn_info bcn_info[0];
} __packed;

#define WMI_MAX_AP_VDEV 16

struct wmi_tbtt_offset_event {
	__le32 vdev_map;
	__le32 tbttoffset_list[WMI_MAX_AP_VDEV];
} __packed;

struct wmi_peer_create_cmd {
	__le32 vdev_id;
	struct wmi_mac_addr peer_macaddr;
} __packed;

enum wmi_peer_type {
	WMI_PEER_TYPE_DEFAULT = 0,
	WMI_PEER_TYPE_BSS = 1,
	WMI_PEER_TYPE_TDLS = 2,
};

struct wmi_peer_delete_cmd {
	__le32 vdev_id;
	struct wmi_mac_addr peer_macaddr;
} __packed;

struct wmi_peer_flush_tids_cmd {
	__le32 vdev_id;
	struct wmi_mac_addr peer_macaddr;
	__le32 peer_tid_bitmap;
} __packed;

struct wmi_fixed_rate {
	/*
	 * rate mode . 0: disable fixed rate (auto rate)
	 *   1: legacy (non 11n) rate  specified as ieee rate 2*Mbps
	 *   2: ht20 11n rate  specified as mcs index
	 *   3: ht40 11n rate  specified as mcs index
	 */
	__le32  rate_mode;
	/*
	 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
	 * and series 3 is stored at byte 3 (MSB)
	 */
	__le32  rate_series;
	/*
	 * 4 retry counts for 4 rate series. retry count for rate 0 is stored
	 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
	 * (MSB)
	 */
	__le32  rate_retries;
} __packed;

struct wmi_peer_fixed_rate_cmd {
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;
	/* peer MAC address */
	struct wmi_mac_addr peer_macaddr;
	/* fixed rate */
	struct wmi_fixed_rate peer_fixed_rate;
} __packed;

#define WMI_MGMT_TID    17

struct wmi_addba_clear_resp_cmd {
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;
	/* peer MAC address */
	struct wmi_mac_addr peer_macaddr;
} __packed;

struct wmi_addba_send_cmd {
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;
	/* peer MAC address */
	struct wmi_mac_addr peer_macaddr;
	/* Tid number */
	__le32 tid;
	/* Buffer/Window size*/
	__le32 buffersize;
} __packed;

struct wmi_delba_send_cmd {
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;
	/* peer MAC address */
	struct wmi_mac_addr peer_macaddr;
	/* Tid number */
	__le32 tid;
	/* Is Initiator */
	__le32 initiator;
	/* Reason code */
	__le32 reasoncode;
} __packed;

struct wmi_addba_setresponse_cmd {
	/* unique id identifying the vdev, generated by the caller */
	__le32 vdev_id;
	/* peer mac address */
	struct wmi_mac_addr peer_macaddr;
	/* Tid number */
	__le32 tid;
	/* status code */
	__le32 statuscode;
} __packed;

struct wmi_send_singleamsdu_cmd {
	/* unique id identifying the vdev, generated by the caller */
	__le32 vdev_id;
	/* peer mac address */
	struct wmi_mac_addr peer_macaddr;
	/* Tid number */
	__le32 tid;
} __packed;

enum wmi_peer_smps_state {
	WMI_PEER_SMPS_PS_NONE = 0x0,
	WMI_PEER_SMPS_STATIC  = 0x1,
	WMI_PEER_SMPS_DYNAMIC = 0x2
};

enum wmi_peer_chwidth {
	WMI_PEER_CHWIDTH_20MHZ = 0,
	WMI_PEER_CHWIDTH_40MHZ = 1,
	WMI_PEER_CHWIDTH_80MHZ = 2,
	WMI_PEER_CHWIDTH_160MHZ = 3,
};

enum wmi_peer_param {
	WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
	WMI_PEER_AMPDU      = 0x2,
	WMI_PEER_AUTHORIZE  = 0x3,
	WMI_PEER_CHAN_WIDTH = 0x4,
	WMI_PEER_NSS        = 0x5,
	WMI_PEER_USE_4ADDR  = 0x6,
	WMI_PEER_DEBUG      = 0xa,
	WMI_PEER_DUMMY_VAR  = 0xff, /* dummy parameter for STA PS workaround */
};

struct wmi_peer_set_param_cmd {
	__le32 vdev_id;
	struct wmi_mac_addr peer_macaddr;
	__le32 param_id;
	__le32 param_value;
} __packed;

#define MAX_SUPPORTED_RATES 128

struct wmi_rate_set {
	/* total number of rates */
	__le32 num_rates;
	/*
	 * rates (each 8bit value) packed into a 32 bit word.
	 * the rates are filled from least significant byte to most
	 * significant byte.
	 */
	__le32 rates[(MAX_SUPPORTED_RATES / 4) + 1];
} __packed;

struct wmi_rate_set_arg {
	unsigned int num_rates;
	u8 rates[MAX_SUPPORTED_RATES];
};

/*
 * NOTE: It would bea good idea to represent the Tx MCS
 * info in one word and Rx in another word. This is split
 * into multiple words for convenience
 */
struct wmi_vht_rate_set {
	__le32 rx_max_rate; /* Max Rx data rate */
	__le32 rx_mcs_set;  /* Negotiated RX VHT rates */
	__le32 tx_max_rate; /* Max Tx data rate */
	__le32 tx_mcs_set;  /* Negotiated TX VHT rates */
} __packed;

struct wmi_vht_rate_set_arg {
	u32 rx_max_rate;
	u32 rx_mcs_set;
	u32 tx_max_rate;
	u32 tx_mcs_set;
};

struct wmi_peer_set_rates_cmd {
	/* peer MAC address */
	struct wmi_mac_addr peer_macaddr;
	/* legacy rate set */
	struct wmi_rate_set peer_legacy_rates;
	/* ht rate set */
	struct wmi_rate_set peer_ht_rates;
} __packed;

struct wmi_peer_set_q_empty_callback_cmd {
	/* unique id identifying the VDEV, generated by the caller */
	__le32 vdev_id;
	/* peer MAC address */
	struct wmi_mac_addr peer_macaddr;
	__le32 callback_enable;
} __packed;

struct wmi_peer_flags_map {
	u32 auth;
	u32 qos;
	u32 need_ptk_4_way;
	u32 need_gtk_2_way;
	u32 apsd;
	u32 ht;
	u32 bw40;
	u32 stbc;
	u32 ldbc;
	u32 dyn_mimops;
	u32 static_mimops;
	u32 spatial_mux;
	u32 vht;
	u32 bw80;
	u32 vht_2g;
	u32 pmf;
	u32 bw160;
};

enum wmi_peer_flags {
	WMI_PEER_AUTH = 0x00000001,
	WMI_PEER_QOS = 0x00000002,
	WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
	WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
	WMI_PEER_APSD = 0x00000800,
	WMI_PEER_HT = 0x00001000,
	WMI_PEER_40MHZ = 0x00002000,
	WMI_PEER_STBC = 0x00008000,
	WMI_PEER_LDPC = 0x00010000,
	WMI_PEER_DYN_MIMOPS = 0x00020000,
	WMI_PEER_STATIC_MIMOPS = 0x00040000,
	WMI_PEER_SPATIAL_MUX = 0x00200000,
	WMI_PEER_VHT = 0x02000000,
	WMI_PEER_80MHZ = 0x04000000,
	WMI_PEER_VHT_2G = 0x08000000,
	WMI_PEER_PMF = 0x10000000,
	WMI_PEER_160MHZ = 0x20000000
};

enum wmi_10x_peer_flags {
	WMI_10X_PEER_AUTH = 0x00000001,
	WMI_10X_PEER_QOS = 0x00000002,
	WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
	WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
	WMI_10X_PEER_APSD = 0x00000800,
	WMI_10X_PEER_HT = 0x00001000,
	WMI_10X_PEER_40MHZ = 0x00002000,
	WMI_10X_PEER_STBC = 0x00008000,
	WMI_10X_PEER_LDPC = 0x00010000,
	WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
	WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
	WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
	WMI_10X_PEER_VHT = 0x02000000,
	WMI_10X_PEER_80MHZ = 0x04000000,
	WMI_10X_PEER_160MHZ = 0x20000000
};

enum wmi_10_2_peer_flags {
	WMI_10_2_PEER_AUTH = 0x00000001,
	WMI_10_2_PEER_QOS = 0x00000002,
	WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,
	WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,
	WMI_10_2_PEER_APSD = 0x00000800,
	WMI_10_2_PEER_HT = 0x00001000,
	WMI_10_2_PEER_40MHZ = 0x00002000,
	WMI_10_2_PEER_STBC = 0x00008000,
	WMI_10_2_PEER_LDPC = 0x00010000,
	WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,
	WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,
	WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,
	WMI_10_2_PEER_VHT = 0x02000000,
	WMI_10_2_PEER_80MHZ = 0x04000000,
	WMI_10_2_PEER_VHT_2G = 0x08000000,
	WMI_10_2_PEER_PMF = 0x10000000,
	WMI_10_2_PEER_160MHZ = 0x20000000
};

/*
 * Peer rate capabilities.
 *
 * This is of interest to the ratecontrol
 * module which resides in the firmware. The bit definitions are
 * consistent with that defined in if_athrate.c.
 */
#define WMI_RC_DS_FLAG          0x01
#define WMI_RC_CW40_FLAG        0x02
#define WMI_RC_SGI_FLAG         0x04
#define WMI_RC_HT_FLAG          0x08
#define WMI_RC_RTSCTS_FLAG      0x10
#define WMI_RC_TX_STBC_FLAG     0x20
#define WMI_RC_RX_STBC_FLAG     0xC0
#define WMI_RC_RX_STBC_FLAG_S   6
#define WMI_RC_WEP_TKIP_FLAG    0x100
#define WMI_RC_TS_FLAG          0x200
#define WMI_RC_UAPSD_FLAG       0x400

/* Maximum listen interval supported by hw in units of beacon interval */
#define ATH10K_MAX_HW_LISTEN_INTERVAL 5

struct wmi_common_peer_assoc_complete_cmd {
	struct wmi_mac_addr peer_macaddr;
	__le32 vdev_id;
	__le32 peer_new_assoc; /* 1=assoc, 0=reassoc */
	__le32 peer_associd; /* 16 LSBs */
	__le32 peer_flags;
	__le32 peer_caps; /* 16 LSBs */
	__le32 peer_listen_intval;
	__le32 peer_ht_caps;
	__le32 peer_max_mpdu;
	__le32 peer_mpdu_density; /* 0..16 */
	__le32 peer_rate_caps;
	struct wmi_rate_set peer_legacy_rates;
	struct wmi_rate_set peer_ht_rates;
	__le32 peer_nss; /* num of spatial streams */
	__le32 peer_vht_caps;
	__le32 peer_phymode;
	struct wmi_vht_rate_set peer_vht_rates;
};

struct wmi_main_peer_assoc_complete_cmd {
	struct wmi_common_peer_assoc_complete_cmd cmd;

	/* HT Operation Element of the peer. Five bytes packed in 2
	 *  INT32 array and filled from lsb to msb.
	 */
	__le32 peer_ht_info[2];
} __packed;

struct wmi_10_1_peer_assoc_complete_cmd {
	struct wmi_common_peer_assoc_complete_cmd cmd;
} __packed;

#define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
#define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
#define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4
#define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0

struct wmi_10_2_peer_assoc_complete_cmd {
	struct wmi_common_peer_assoc_complete_cmd cmd;
	__le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
} __packed;

struct wmi_10_4_peer_assoc_complete_cmd {
	struct wmi_10_2_peer_assoc_complete_cmd cmd;
	__le32 peer_bw_rxnss_override;
} __packed;

struct wmi_peer_assoc_complete_arg {
	u8 addr[ETH_ALEN];
	u32 vdev_id;
	bool peer_reassoc;
	u16 peer_aid;
	u32 peer_flags; /* see %WMI_PEER_ */
	u16 peer_caps;
	u32 peer_listen_intval;
	u32 peer_ht_caps;
	u32 peer_max_mpdu;
	u32 peer_mpdu_density; /* 0..16 */
	u32 peer_rate_caps; /* see %WMI_RC_ */
	struct wmi_rate_set_arg peer_legacy_rates;
	struct wmi_rate_set_arg peer_ht_rates;
	u32 peer_num_spatial_streams;
	u32 peer_vht_caps;
	enum wmi_phy_mode peer_phymode;
	struct wmi_vht_rate_set_arg peer_vht_rates;
};

struct wmi_peer_add_wds_entry_cmd {
	/* peer MAC address */
	struct wmi_mac_addr peer_macaddr;
	/* wds MAC addr */
	struct wmi_mac_addr wds_macaddr;
} __packed;

struct wmi_peer_remove_wds_entry_cmd {
	/* wds MAC addr */
	struct wmi_mac_addr wds_macaddr;
} __packed;

struct wmi_peer_q_empty_callback_event {
	/* peer MAC address */
	struct wmi_mac_addr peer_macaddr;
} __packed;

/*
 * Channel info WMI event
 */
struct wmi_chan_info_event {
	__le32 err_code;
	__le32 freq;
	__le32 cmd_flags;
	__le32 noise_floor;
	__le32 rx_clear_count;
	__le32 cycle_count;
} __packed;

struct wmi_10_4_chan_info_event {
	__le32 err_code;
	__le32 freq;
	__le32 cmd_flags;
	__le32 noise_floor;
	__le32 rx_clear_count;
	__le32 cycle_count;
	__le32 chan_tx_pwr_range;
	__le32 chan_tx_pwr_tp;
	__le32 rx_frame_count;
} __packed;

struct wmi_peer_sta_kickout_event {
	struct wmi_mac_addr peer_macaddr;
} __packed;

#define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
#define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)

/* Beacon filter wmi command info */
#define BCN_FLT_MAX_SUPPORTED_IES	256
#define BCN_FLT_MAX_ELEMS_IE_LIST	(BCN_FLT_MAX_SUPPORTED_IES / 32)

struct bss_bcn_stats {
	__le32 vdev_id;
	__le32 bss_bcnsdropped;
	__le32 bss_bcnsdelivered;
} __packed;

struct bcn_filter_stats {
	__le32 bcns_dropped;
	__le32 bcns_delivered;
	__le32 activefilters;
	struct bss_bcn_stats bss_stats;
} __packed;

struct wmi_add_bcn_filter_cmd {
	u32 vdev_id;
	u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
} __packed;

enum wmi_sta_keepalive_method {
	WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,
	WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
};

#define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0

/* Firmware crashes if keepalive interval exceeds this limit */
#define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff

/* note: ip4 addresses are in network byte order, i.e. big endian */
struct wmi_sta_keepalive_arp_resp {
	__be32 src_ip4_addr;
	__be32 dest_ip4_addr;
	struct wmi_mac_addr dest_mac_addr;
} __packed;

struct wmi_sta_keepalive_cmd {
	__le32 vdev_id;
	__le32 enabled;
	__le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
	__le32 interval; /* in seconds */
	struct wmi_sta_keepalive_arp_resp arp_resp;
} __packed;

struct wmi_sta_keepalive_arg {
	u32 vdev_id;
	u32 enabled;
	u32 method;
	u32 interval;
	__be32 src_ip4_addr;
	__be32 dest_ip4_addr;
	const u8 dest_mac_addr[ETH_ALEN];
};

enum wmi_force_fw_hang_type {
	WMI_FORCE_FW_HANG_ASSERT = 1,
	WMI_FORCE_FW_HANG_NO_DETECT,
	WMI_FORCE_FW_HANG_CTRL_EP_FULL,
	WMI_FORCE_FW_HANG_EMPTY_POINT,
	WMI_FORCE_FW_HANG_STACK_OVERFLOW,
	WMI_FORCE_FW_HANG_INFINITE_LOOP,
};

#define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF

struct wmi_force_fw_hang_cmd {
	__le32 type;
	__le32 delay_ms;
} __packed;

enum ath10k_dbglog_level {
	ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
	ATH10K_DBGLOG_LEVEL_INFO = 1,
	ATH10K_DBGLOG_LEVEL_WARN = 2,
	ATH10K_DBGLOG_LEVEL_ERR = 3,
};

/* VAP ids to enable dbglog */
#define ATH10K_DBGLOG_CFG_VAP_LOG_LSB		0
#define ATH10K_DBGLOG_CFG_VAP_LOG_MASK		0x0000ffff

/* to enable dbglog in the firmware */
#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB	16
#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK	0x00010000

/* timestamp resolution */
#define ATH10K_DBGLOG_CFG_RESOLUTION_LSB	17
#define ATH10K_DBGLOG_CFG_RESOLUTION_MASK	0x000E0000

/* number of queued messages before sending them to the host */
#define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB	20
#define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK	0x0ff00000

/*
 * Log levels to enable. This defines the minimum level to enable, this is
 * not a bitmask. See enum ath10k_dbglog_level for the values.
 */
#define ATH10K_DBGLOG_CFG_LOG_LVL_LSB		28
#define ATH10K_DBGLOG_CFG_LOG_LVL_MASK		0x70000000

/*
 * Note: this is a cleaned up version of a struct firmware uses. For
 * example, config_valid was hidden inside an array.
 */
struct wmi_dbglog_cfg_cmd {
	/* bitmask to hold mod id config*/
	__le32 module_enable;

	/* see ATH10K_DBGLOG_CFG_ */
	__le32 config_enable;

	/* mask of module id bits to be changed */
	__le32 module_valid;

	/* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
	__le32 config_valid;
} __packed;

struct wmi_10_4_dbglog_cfg_cmd {
	/* bitmask to hold mod id config*/
	__le64 module_enable;

	/* see ATH10K_DBGLOG_CFG_ */
	__le32 config_enable;

	/* mask of module id bits to be changed */
	__le64 module_valid;

	/* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
	__le32 config_valid;
} __packed;

enum wmi_roam_reason {
	WMI_ROAM_REASON_BETTER_AP = 1,
	WMI_ROAM_REASON_BEACON_MISS = 2,
	WMI_ROAM_REASON_LOW_RSSI = 3,
	WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4,
	WMI_ROAM_REASON_HO_FAILED = 5,

	/* keep last */
	WMI_ROAM_REASON_MAX,
};

struct wmi_roam_ev {
	__le32 vdev_id;
	__le32 reason;
} __packed;

#define ATH10K_FRAGMT_THRESHOLD_MIN	540
#define ATH10K_FRAGMT_THRESHOLD_MAX	2346

#define WMI_MAX_EVENT 0x1000
/* Maximum number of pending TXed WMI packets */
#define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)

/* By default disable power save for IBSS */
#define ATH10K_DEFAULT_ATIM 0

#define WMI_MAX_MEM_REQS 16

struct wmi_scan_ev_arg {
	__le32 event_type; /* %WMI_SCAN_EVENT_ */
	__le32 reason; /* %WMI_SCAN_REASON_ */
	__le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
	__le32 scan_req_id;
	__le32 scan_id;
	__le32 vdev_id;
};

struct wmi_mgmt_rx_ev_arg {
	__le32 channel;
	__le32 snr;
	__le32 rate;
	__le32 phy_mode;
	__le32 buf_len;
	__le32 status; /* %WMI_RX_STATUS_ */
	struct wmi_mgmt_rx_ext_info ext_info;
};

struct wmi_ch_info_ev_arg {
	__le32 err_code;
	__le32 freq;
	__le32 cmd_flags;
	__le32 noise_floor;
	__le32 rx_clear_count;
	__le32 cycle_count;
	__le32 chan_tx_pwr_range;
	__le32 chan_tx_pwr_tp;
	__le32 rx_frame_count;
};

struct wmi_vdev_start_ev_arg {
	__le32 vdev_id;
	__le32 req_id;
	__le32 resp_type; /* %WMI_VDEV_RESP_ */
	__le32 status;
};

struct wmi_peer_kick_ev_arg {
	const u8 *mac_addr;
};

struct wmi_swba_ev_arg {
	__le32 vdev_map;
	struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV];
	const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];
};

struct wmi_phyerr_ev_arg {
	u32 tsf_timestamp;
	u16 freq1;
	u16 freq2;
	u8 rssi_combined;
	u8 chan_width_mhz;
	u8 phy_err_code;
	u16 nf_chains[4];
	u32 buf_len;
	const u8 *buf;
	u8 hdr_len;
};

struct wmi_phyerr_hdr_arg {
	u32 num_phyerrs;
	u32 tsf_l32;
	u32 tsf_u32;
	u32 buf_len;
	const void *phyerrs;
};

struct wmi_svc_rdy_ev_arg {
	__le32 min_tx_power;
	__le32 max_tx_power;
	__le32 ht_cap;
	__le32 vht_cap;
	__le32 sw_ver0;
	__le32 sw_ver1;
	__le32 fw_build;
	__le32 phy_capab;
	__le32 num_rf_chains;
	__le32 eeprom_rd;
	__le32 num_mem_reqs;
	__le32 low_5ghz_chan;
	__le32 high_5ghz_chan;
	const __le32 *service_map;
	size_t service_map_len;
	const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
};

struct wmi_rdy_ev_arg {
	__le32 sw_version;
	__le32 abi_version;
	__le32 status;
	const u8 *mac_addr;
};

struct wmi_roam_ev_arg {
	__le32 vdev_id;
	__le32 reason;
	__le32 rssi;
};

struct wmi_echo_ev_arg {
	__le32 value;
};

struct wmi_pdev_temperature_event {
	/* temperature value in Celcius degree */
	__le32 temperature;
} __packed;

struct wmi_pdev_bss_chan_info_event {
	__le32 freq;
	__le32 noise_floor;
	__le64 cycle_busy;
	__le64 cycle_total;
	__le64 cycle_tx;
	__le64 cycle_rx;
	__le64 cycle_rx_bss;
	__le32 reserved;
} __packed;

/* WOW structures */
enum wmi_wow_wakeup_event {
	WOW_BMISS_EVENT = 0,
	WOW_BETTER_AP_EVENT,
	WOW_DEAUTH_RECVD_EVENT,
	WOW_MAGIC_PKT_RECVD_EVENT,
	WOW_GTK_ERR_EVENT,
	WOW_FOURWAY_HSHAKE_EVENT,
	WOW_EAPOL_RECVD_EVENT,
	WOW_NLO_DETECTED_EVENT,
	WOW_DISASSOC_RECVD_EVENT,
	WOW_PATTERN_MATCH_EVENT,
	WOW_CSA_IE_EVENT,
	WOW_PROBE_REQ_WPS_IE_EVENT,
	WOW_AUTH_REQ_EVENT,
	WOW_ASSOC_REQ_EVENT,
	WOW_HTT_EVENT,
	WOW_RA_MATCH_EVENT,
	WOW_HOST_AUTO_SHUTDOWN_EVENT,
	WOW_IOAC_MAGIC_EVENT,
	WOW_IOAC_SHORT_EVENT,
	WOW_IOAC_EXTEND_EVENT,
	WOW_IOAC_TIMER_EVENT,
	WOW_DFS_PHYERR_RADAR_EVENT,
	WOW_BEACON_EVENT,
	WOW_CLIENT_KICKOUT_EVENT,
	WOW_EVENT_MAX,
};

#define C2S(x) case x: return #x

static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev)
{
	switch (ev) {
	C2S(WOW_BMISS_EVENT);
	C2S(WOW_BETTER_AP_EVENT);
	C2S(WOW_DEAUTH_RECVD_EVENT);
	C2S(WOW_MAGIC_PKT_RECVD_EVENT);
	C2S(WOW_GTK_ERR_EVENT);
	C2S(WOW_FOURWAY_HSHAKE_EVENT);
	C2S(WOW_EAPOL_RECVD_EVENT);
	C2S(WOW_NLO_DETECTED_EVENT);
	C2S(WOW_DISASSOC_RECVD_EVENT);
	C2S(WOW_PATTERN_MATCH_EVENT);
	C2S(WOW_CSA_IE_EVENT);
	C2S(WOW_PROBE_REQ_WPS_IE_EVENT);
	C2S(WOW_AUTH_REQ_EVENT);
	C2S(WOW_ASSOC_REQ_EVENT);
	C2S(WOW_HTT_EVENT);
	C2S(WOW_RA_MATCH_EVENT);
	C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT);
	C2S(WOW_IOAC_MAGIC_EVENT);
	C2S(WOW_IOAC_SHORT_EVENT);
	C2S(WOW_IOAC_EXTEND_EVENT);
	C2S(WOW_IOAC_TIMER_EVENT);
	C2S(WOW_DFS_PHYERR_RADAR_EVENT);
	C2S(WOW_BEACON_EVENT);
	C2S(WOW_CLIENT_KICKOUT_EVENT);
	C2S(WOW_EVENT_MAX);
	default:
		return NULL;
	}
}

enum wmi_wow_wake_reason {
	WOW_REASON_UNSPECIFIED = -1,
	WOW_REASON_NLOD = 0,
	WOW_REASON_AP_ASSOC_LOST,
	WOW_REASON_LOW_RSSI,
	WOW_REASON_DEAUTH_RECVD,
	WOW_REASON_DISASSOC_RECVD,
	WOW_REASON_GTK_HS_ERR,
	WOW_REASON_EAP_REQ,
	WOW_REASON_FOURWAY_HS_RECV,
	WOW_REASON_TIMER_INTR_RECV,
	WOW_REASON_PATTERN_MATCH_FOUND,
	WOW_REASON_RECV_MAGIC_PATTERN,
	WOW_REASON_P2P_DISC,
	WOW_REASON_WLAN_HB,
	WOW_REASON_CSA_EVENT,
	WOW_REASON_PROBE_REQ_WPS_IE_RECV,
	WOW_REASON_AUTH_REQ_RECV,
	WOW_REASON_ASSOC_REQ_RECV,
	WOW_REASON_HTT_EVENT,
	WOW_REASON_RA_MATCH,
	WOW_REASON_HOST_AUTO_SHUTDOWN,
	WOW_REASON_IOAC_MAGIC_EVENT,
	WOW_REASON_IOAC_SHORT_EVENT,
	WOW_REASON_IOAC_EXTEND_EVENT,
	WOW_REASON_IOAC_TIMER_EVENT,
	WOW_REASON_ROAM_HO,
	WOW_REASON_DFS_PHYERR_RADADR_EVENT,
	WOW_REASON_BEACON_RECV,
	WOW_REASON_CLIENT_KICKOUT_EVENT,
	WOW_REASON_DEBUG_TEST = 0xFF,
};

static inline const char *wow_reason(enum wmi_wow_wake_reason reason)
{
	switch (reason) {
	C2S(WOW_REASON_UNSPECIFIED);
	C2S(WOW_REASON_NLOD);
	C2S(WOW_REASON_AP_ASSOC_LOST);
	C2S(WOW_REASON_LOW_RSSI);
	C2S(WOW_REASON_DEAUTH_RECVD);
	C2S(WOW_REASON_DISASSOC_RECVD);
	C2S(WOW_REASON_GTK_HS_ERR);
	C2S(WOW_REASON_EAP_REQ);
	C2S(WOW_REASON_FOURWAY_HS_RECV);
	C2S(WOW_REASON_TIMER_INTR_RECV);
	C2S(WOW_REASON_PATTERN_MATCH_FOUND);
	C2S(WOW_REASON_RECV_MAGIC_PATTERN);
	C2S(WOW_REASON_P2P_DISC);
	C2S(WOW_REASON_WLAN_HB);
	C2S(WOW_REASON_CSA_EVENT);
	C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV);
	C2S(WOW_REASON_AUTH_REQ_RECV);
	C2S(WOW_REASON_ASSOC_REQ_RECV);
	C2S(WOW_REASON_HTT_EVENT);
	C2S(WOW_REASON_RA_MATCH);
	C2S(WOW_REASON_HOST_AUTO_SHUTDOWN);
	C2S(WOW_REASON_IOAC_MAGIC_EVENT);
	C2S(WOW_REASON_IOAC_SHORT_EVENT);
	C2S(WOW_REASON_IOAC_EXTEND_EVENT);
	C2S(WOW_REASON_IOAC_TIMER_EVENT);
	C2S(WOW_REASON_ROAM_HO);
	C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT);
	C2S(WOW_REASON_BEACON_RECV);
	C2S(WOW_REASON_CLIENT_KICKOUT_EVENT);
	C2S(WOW_REASON_DEBUG_TEST);
	default:
		return NULL;
	}
}

#undef C2S

struct wmi_wow_ev_arg {
	u32 vdev_id;
	u32 flag;
	enum wmi_wow_wake_reason wake_reason;
	u32 data_len;
};

#define WOW_MIN_PATTERN_SIZE	1
#define WOW_MAX_PATTERN_SIZE	148
#define WOW_MAX_PKT_OFFSET	128

enum wmi_tdls_state {
	WMI_TDLS_DISABLE,
	WMI_TDLS_ENABLE_PASSIVE,
	WMI_TDLS_ENABLE_ACTIVE,
};

enum wmi_tdls_peer_state {
	WMI_TDLS_PEER_STATE_PEERING,
	WMI_TDLS_PEER_STATE_CONNECTED,
	WMI_TDLS_PEER_STATE_TEARDOWN,
};

struct wmi_tdls_peer_update_cmd_arg {
	u32 vdev_id;
	enum wmi_tdls_peer_state peer_state;
	u8 addr[ETH_ALEN];
};

#define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32

struct wmi_tdls_peer_capab_arg {
	u8 peer_uapsd_queues;
	u8 peer_max_sp;
	u32 buff_sta_support;
	u32 off_chan_support;
	u32 peer_curr_operclass;
	u32 self_curr_operclass;
	u32 peer_chan_len;
	u32 peer_operclass_len;
	u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
	u32 is_peer_responder;
	u32 pref_offchan_num;
	u32 pref_offchan_bw;
};

enum wmi_txbf_conf {
	WMI_TXBF_CONF_UNSUPPORTED,
	WMI_TXBF_CONF_BEFORE_ASSOC,
	WMI_TXBF_CONF_AFTER_ASSOC,
};

#define	WMI_CCA_DETECT_LEVEL_AUTO	0
#define	WMI_CCA_DETECT_MARGIN_AUTO	0

struct wmi_pdev_set_adaptive_cca_params {
	__le32 enable;
	__le32 cca_detect_level;
	__le32 cca_detect_margin;
} __packed;

enum wmi_host_platform_type {
	WMI_HOST_PLATFORM_HIGH_PERF,
	WMI_HOST_PLATFORM_LOW_PERF,
};

enum wmi_bss_survey_req_type {
	WMI_BSS_SURVEY_REQ_TYPE_READ = 1,
	WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR,
};

struct wmi_pdev_chan_info_req_cmd {
	__le32 type;
	__le32 reserved;
} __packed;

struct ath10k;
struct ath10k_vif;
struct ath10k_fw_stats_pdev;
struct ath10k_fw_stats_peer;
struct ath10k_fw_stats;

int ath10k_wmi_attach(struct ath10k *ar);
void ath10k_wmi_detach(struct ath10k *ar);
void ath10k_wmi_free_host_mem(struct ath10k *ar);
int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);

struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
int ath10k_wmi_connect(struct ath10k *ar);

struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
			       u32 cmd_id);
void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg);

void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
				     struct ath10k_fw_stats_pdev *dst);
void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
				   struct ath10k_fw_stats_pdev *dst);
void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
				   struct ath10k_fw_stats_pdev *dst);
void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
				      struct ath10k_fw_stats_pdev *dst);
void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
				struct ath10k_fw_stats_peer *dst);
void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
				    struct wmi_host_mem_chunks *chunks);
void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
				      const struct wmi_start_scan_arg *arg);
void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
			      const struct wmi_wmm_params_arg *arg);
void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
				const struct wmi_channel_arg *arg);
int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);

int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);
int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);
int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_dfs(struct ath10k *ar,
			  struct wmi_phyerr_ev_arg *phyerr, u64 tsf);
void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
				    struct wmi_phyerr_ev_arg *phyerr,
				    u64 tsf);
void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
					     struct sk_buff *skb);
void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
					     struct sk_buff *skb);
void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
					 struct sk_buff *skb);
void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
						struct sk_buff *skb);
void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);
void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);
int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);
int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf,
				 int left_len, struct wmi_phyerr_ev_arg *arg);
void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar,
				      struct ath10k_fw_stats *fw_stats,
				      char *buf);
void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar,
				     struct ath10k_fw_stats *fw_stats,
				     char *buf);
size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head);
size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head);
void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
				      struct ath10k_fw_stats *fw_stats,
				      char *buf);
int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
				   enum wmi_vdev_subtype subtype);
int ath10k_wmi_barrier(struct ath10k *ar);

#endif /* _WMI_H_ */