setup.c 24 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902
  1. /*
  2. * S390 version
  3. * Copyright IBM Corp. 1999, 2012
  4. * Author(s): Hartmut Penner (hp@de.ibm.com),
  5. * Martin Schwidefsky (schwidefsky@de.ibm.com)
  6. *
  7. * Derived from "arch/i386/kernel/setup.c"
  8. * Copyright (C) 1995, Linus Torvalds
  9. */
  10. /*
  11. * This file handles the architecture-dependent parts of initialization
  12. */
  13. #define KMSG_COMPONENT "setup"
  14. #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
  15. #include <linux/errno.h>
  16. #include <linux/export.h>
  17. #include <linux/sched.h>
  18. #include <linux/kernel.h>
  19. #include <linux/memblock.h>
  20. #include <linux/mm.h>
  21. #include <linux/stddef.h>
  22. #include <linux/unistd.h>
  23. #include <linux/ptrace.h>
  24. #include <linux/random.h>
  25. #include <linux/user.h>
  26. #include <linux/tty.h>
  27. #include <linux/ioport.h>
  28. #include <linux/delay.h>
  29. #include <linux/init.h>
  30. #include <linux/initrd.h>
  31. #include <linux/bootmem.h>
  32. #include <linux/root_dev.h>
  33. #include <linux/console.h>
  34. #include <linux/kernel_stat.h>
  35. #include <linux/device.h>
  36. #include <linux/notifier.h>
  37. #include <linux/pfn.h>
  38. #include <linux/ctype.h>
  39. #include <linux/reboot.h>
  40. #include <linux/topology.h>
  41. #include <linux/kexec.h>
  42. #include <linux/crash_dump.h>
  43. #include <linux/memory.h>
  44. #include <linux/compat.h>
  45. #include <asm/ipl.h>
  46. #include <asm/facility.h>
  47. #include <asm/smp.h>
  48. #include <asm/mmu_context.h>
  49. #include <asm/cpcmd.h>
  50. #include <asm/lowcore.h>
  51. #include <asm/irq.h>
  52. #include <asm/page.h>
  53. #include <asm/ptrace.h>
  54. #include <asm/sections.h>
  55. #include <asm/ebcdic.h>
  56. #include <asm/kvm_virtio.h>
  57. #include <asm/diag.h>
  58. #include <asm/os_info.h>
  59. #include <asm/sclp.h>
  60. #include <asm/sysinfo.h>
  61. #include <asm/numa.h>
  62. #include "entry.h"
  63. /*
  64. * Machine setup..
  65. */
  66. unsigned int console_mode = 0;
  67. EXPORT_SYMBOL(console_mode);
  68. unsigned int console_devno = -1;
  69. EXPORT_SYMBOL(console_devno);
  70. unsigned int console_irq = -1;
  71. EXPORT_SYMBOL(console_irq);
  72. unsigned long elf_hwcap __read_mostly = 0;
  73. char elf_platform[ELF_PLATFORM_SIZE];
  74. unsigned long int_hwcap = 0;
  75. int __initdata memory_end_set;
  76. unsigned long __initdata memory_end;
  77. unsigned long __initdata max_physmem_end;
  78. unsigned long VMALLOC_START;
  79. EXPORT_SYMBOL(VMALLOC_START);
  80. unsigned long VMALLOC_END;
  81. EXPORT_SYMBOL(VMALLOC_END);
  82. struct page *vmemmap;
  83. EXPORT_SYMBOL(vmemmap);
  84. unsigned long MODULES_VADDR;
  85. unsigned long MODULES_END;
  86. /* An array with a pointer to the lowcore of every CPU. */
  87. struct lowcore *lowcore_ptr[NR_CPUS];
  88. EXPORT_SYMBOL(lowcore_ptr);
  89. /*
  90. * This is set up by the setup-routine at boot-time
  91. * for S390 need to find out, what we have to setup
  92. * using address 0x10400 ...
  93. */
  94. #include <asm/setup.h>
  95. /*
  96. * condev= and conmode= setup parameter.
  97. */
  98. static int __init condev_setup(char *str)
  99. {
  100. int vdev;
  101. vdev = simple_strtoul(str, &str, 0);
  102. if (vdev >= 0 && vdev < 65536) {
  103. console_devno = vdev;
  104. console_irq = -1;
  105. }
  106. return 1;
  107. }
  108. __setup("condev=", condev_setup);
  109. static void __init set_preferred_console(void)
  110. {
  111. if (MACHINE_IS_KVM) {
  112. if (sclp.has_vt220)
  113. add_preferred_console("ttyS", 1, NULL);
  114. else if (sclp.has_linemode)
  115. add_preferred_console("ttyS", 0, NULL);
  116. else
  117. add_preferred_console("hvc", 0, NULL);
  118. } else if (CONSOLE_IS_3215 || CONSOLE_IS_SCLP)
  119. add_preferred_console("ttyS", 0, NULL);
  120. else if (CONSOLE_IS_3270)
  121. add_preferred_console("tty3270", 0, NULL);
  122. }
  123. static int __init conmode_setup(char *str)
  124. {
  125. #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
  126. if (strncmp(str, "hwc", 4) == 0 || strncmp(str, "sclp", 5) == 0)
  127. SET_CONSOLE_SCLP;
  128. #endif
  129. #if defined(CONFIG_TN3215_CONSOLE)
  130. if (strncmp(str, "3215", 5) == 0)
  131. SET_CONSOLE_3215;
  132. #endif
  133. #if defined(CONFIG_TN3270_CONSOLE)
  134. if (strncmp(str, "3270", 5) == 0)
  135. SET_CONSOLE_3270;
  136. #endif
  137. set_preferred_console();
  138. return 1;
  139. }
  140. __setup("conmode=", conmode_setup);
  141. static void __init conmode_default(void)
  142. {
  143. char query_buffer[1024];
  144. char *ptr;
  145. if (MACHINE_IS_VM) {
  146. cpcmd("QUERY CONSOLE", query_buffer, 1024, NULL);
  147. console_devno = simple_strtoul(query_buffer + 5, NULL, 16);
  148. ptr = strstr(query_buffer, "SUBCHANNEL =");
  149. console_irq = simple_strtoul(ptr + 13, NULL, 16);
  150. cpcmd("QUERY TERM", query_buffer, 1024, NULL);
  151. ptr = strstr(query_buffer, "CONMODE");
  152. /*
  153. * Set the conmode to 3215 so that the device recognition
  154. * will set the cu_type of the console to 3215. If the
  155. * conmode is 3270 and we don't set it back then both
  156. * 3215 and the 3270 driver will try to access the console
  157. * device (3215 as console and 3270 as normal tty).
  158. */
  159. cpcmd("TERM CONMODE 3215", NULL, 0, NULL);
  160. if (ptr == NULL) {
  161. #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
  162. SET_CONSOLE_SCLP;
  163. #endif
  164. return;
  165. }
  166. if (strncmp(ptr + 8, "3270", 4) == 0) {
  167. #if defined(CONFIG_TN3270_CONSOLE)
  168. SET_CONSOLE_3270;
  169. #elif defined(CONFIG_TN3215_CONSOLE)
  170. SET_CONSOLE_3215;
  171. #elif defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
  172. SET_CONSOLE_SCLP;
  173. #endif
  174. } else if (strncmp(ptr + 8, "3215", 4) == 0) {
  175. #if defined(CONFIG_TN3215_CONSOLE)
  176. SET_CONSOLE_3215;
  177. #elif defined(CONFIG_TN3270_CONSOLE)
  178. SET_CONSOLE_3270;
  179. #elif defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
  180. SET_CONSOLE_SCLP;
  181. #endif
  182. }
  183. } else {
  184. #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
  185. SET_CONSOLE_SCLP;
  186. #endif
  187. }
  188. }
  189. #ifdef CONFIG_CRASH_DUMP
  190. static void __init setup_zfcpdump(void)
  191. {
  192. if (ipl_info.type != IPL_TYPE_FCP_DUMP)
  193. return;
  194. if (OLDMEM_BASE)
  195. return;
  196. strcat(boot_command_line, " cio_ignore=all,!ipldev,!condev");
  197. console_loglevel = 2;
  198. }
  199. #else
  200. static inline void setup_zfcpdump(void) {}
  201. #endif /* CONFIG_CRASH_DUMP */
  202. /*
  203. * Reboot, halt and power_off stubs. They just call _machine_restart,
  204. * _machine_halt or _machine_power_off.
  205. */
  206. void machine_restart(char *command)
  207. {
  208. if ((!in_interrupt() && !in_atomic()) || oops_in_progress)
  209. /*
  210. * Only unblank the console if we are called in enabled
  211. * context or a bust_spinlocks cleared the way for us.
  212. */
  213. console_unblank();
  214. _machine_restart(command);
  215. }
  216. void machine_halt(void)
  217. {
  218. if (!in_interrupt() || oops_in_progress)
  219. /*
  220. * Only unblank the console if we are called in enabled
  221. * context or a bust_spinlocks cleared the way for us.
  222. */
  223. console_unblank();
  224. _machine_halt();
  225. }
  226. void machine_power_off(void)
  227. {
  228. if (!in_interrupt() || oops_in_progress)
  229. /*
  230. * Only unblank the console if we are called in enabled
  231. * context or a bust_spinlocks cleared the way for us.
  232. */
  233. console_unblank();
  234. _machine_power_off();
  235. }
  236. /*
  237. * Dummy power off function.
  238. */
  239. void (*pm_power_off)(void) = machine_power_off;
  240. EXPORT_SYMBOL_GPL(pm_power_off);
  241. static int __init early_parse_mem(char *p)
  242. {
  243. memory_end = memparse(p, &p);
  244. memory_end &= PAGE_MASK;
  245. memory_end_set = 1;
  246. return 0;
  247. }
  248. early_param("mem", early_parse_mem);
  249. static int __init parse_vmalloc(char *arg)
  250. {
  251. if (!arg)
  252. return -EINVAL;
  253. VMALLOC_END = (memparse(arg, &arg) + PAGE_SIZE - 1) & PAGE_MASK;
  254. return 0;
  255. }
  256. early_param("vmalloc", parse_vmalloc);
  257. void *restart_stack __attribute__((__section__(".data")));
  258. static void __init setup_lowcore(void)
  259. {
  260. struct lowcore *lc;
  261. /*
  262. * Setup lowcore for boot cpu
  263. */
  264. BUILD_BUG_ON(sizeof(struct lowcore) != LC_PAGES * 4096);
  265. lc = __alloc_bootmem_low(LC_PAGES * PAGE_SIZE, LC_PAGES * PAGE_SIZE, 0);
  266. lc->restart_psw.mask = PSW_KERNEL_BITS;
  267. lc->restart_psw.addr = (unsigned long) restart_int_handler;
  268. lc->external_new_psw.mask = PSW_KERNEL_BITS |
  269. PSW_MASK_DAT | PSW_MASK_MCHECK;
  270. lc->external_new_psw.addr = (unsigned long) ext_int_handler;
  271. lc->svc_new_psw.mask = PSW_KERNEL_BITS |
  272. PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
  273. lc->svc_new_psw.addr = (unsigned long) system_call;
  274. lc->program_new_psw.mask = PSW_KERNEL_BITS |
  275. PSW_MASK_DAT | PSW_MASK_MCHECK;
  276. lc->program_new_psw.addr = (unsigned long) pgm_check_handler;
  277. lc->mcck_new_psw.mask = PSW_KERNEL_BITS;
  278. lc->mcck_new_psw.addr = (unsigned long) mcck_int_handler;
  279. lc->io_new_psw.mask = PSW_KERNEL_BITS |
  280. PSW_MASK_DAT | PSW_MASK_MCHECK;
  281. lc->io_new_psw.addr = (unsigned long) io_int_handler;
  282. lc->clock_comparator = -1ULL;
  283. lc->kernel_stack = ((unsigned long) &init_thread_union)
  284. + THREAD_SIZE - STACK_FRAME_OVERHEAD - sizeof(struct pt_regs);
  285. lc->async_stack = (unsigned long)
  286. __alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0)
  287. + ASYNC_SIZE - STACK_FRAME_OVERHEAD - sizeof(struct pt_regs);
  288. lc->panic_stack = (unsigned long)
  289. __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0)
  290. + PAGE_SIZE - STACK_FRAME_OVERHEAD - sizeof(struct pt_regs);
  291. lc->current_task = (unsigned long) init_thread_union.thread_info.task;
  292. lc->thread_info = (unsigned long) &init_thread_union;
  293. lc->machine_flags = S390_lowcore.machine_flags;
  294. lc->stfl_fac_list = S390_lowcore.stfl_fac_list;
  295. memcpy(lc->stfle_fac_list, S390_lowcore.stfle_fac_list,
  296. MAX_FACILITY_BIT/8);
  297. if (MACHINE_HAS_VX)
  298. lc->vector_save_area_addr =
  299. (unsigned long) &lc->vector_save_area;
  300. lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0];
  301. lc->sync_enter_timer = S390_lowcore.sync_enter_timer;
  302. lc->async_enter_timer = S390_lowcore.async_enter_timer;
  303. lc->exit_timer = S390_lowcore.exit_timer;
  304. lc->user_timer = S390_lowcore.user_timer;
  305. lc->system_timer = S390_lowcore.system_timer;
  306. lc->steal_timer = S390_lowcore.steal_timer;
  307. lc->last_update_timer = S390_lowcore.last_update_timer;
  308. lc->last_update_clock = S390_lowcore.last_update_clock;
  309. restart_stack = __alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0);
  310. restart_stack += ASYNC_SIZE;
  311. /*
  312. * Set up PSW restart to call ipl.c:do_restart(). Copy the relevant
  313. * restart data to the absolute zero lowcore. This is necessary if
  314. * PSW restart is done on an offline CPU that has lowcore zero.
  315. */
  316. lc->restart_stack = (unsigned long) restart_stack;
  317. lc->restart_fn = (unsigned long) do_restart;
  318. lc->restart_data = 0;
  319. lc->restart_source = -1UL;
  320. /* Setup absolute zero lowcore */
  321. mem_assign_absolute(S390_lowcore.restart_stack, lc->restart_stack);
  322. mem_assign_absolute(S390_lowcore.restart_fn, lc->restart_fn);
  323. mem_assign_absolute(S390_lowcore.restart_data, lc->restart_data);
  324. mem_assign_absolute(S390_lowcore.restart_source, lc->restart_source);
  325. mem_assign_absolute(S390_lowcore.restart_psw, lc->restart_psw);
  326. #ifdef CONFIG_SMP
  327. lc->spinlock_lockval = arch_spin_lockval(0);
  328. #endif
  329. set_prefix((u32)(unsigned long) lc);
  330. lowcore_ptr[0] = lc;
  331. }
  332. static struct resource code_resource = {
  333. .name = "Kernel code",
  334. .flags = IORESOURCE_BUSY | IORESOURCE_MEM,
  335. };
  336. static struct resource data_resource = {
  337. .name = "Kernel data",
  338. .flags = IORESOURCE_BUSY | IORESOURCE_MEM,
  339. };
  340. static struct resource bss_resource = {
  341. .name = "Kernel bss",
  342. .flags = IORESOURCE_BUSY | IORESOURCE_MEM,
  343. };
  344. static struct resource __initdata *standard_resources[] = {
  345. &code_resource,
  346. &data_resource,
  347. &bss_resource,
  348. };
  349. static void __init setup_resources(void)
  350. {
  351. struct resource *res, *std_res, *sub_res;
  352. struct memblock_region *reg;
  353. int j;
  354. code_resource.start = (unsigned long) &_text;
  355. code_resource.end = (unsigned long) &_etext - 1;
  356. data_resource.start = (unsigned long) &_etext;
  357. data_resource.end = (unsigned long) &_edata - 1;
  358. bss_resource.start = (unsigned long) &__bss_start;
  359. bss_resource.end = (unsigned long) &__bss_stop - 1;
  360. for_each_memblock(memory, reg) {
  361. res = alloc_bootmem_low(sizeof(*res));
  362. res->flags = IORESOURCE_BUSY | IORESOURCE_MEM;
  363. res->name = "System RAM";
  364. res->start = reg->base;
  365. res->end = reg->base + reg->size - 1;
  366. request_resource(&iomem_resource, res);
  367. for (j = 0; j < ARRAY_SIZE(standard_resources); j++) {
  368. std_res = standard_resources[j];
  369. if (std_res->start < res->start ||
  370. std_res->start > res->end)
  371. continue;
  372. if (std_res->end > res->end) {
  373. sub_res = alloc_bootmem_low(sizeof(*sub_res));
  374. *sub_res = *std_res;
  375. sub_res->end = res->end;
  376. std_res->start = res->end + 1;
  377. request_resource(res, sub_res);
  378. } else {
  379. request_resource(res, std_res);
  380. }
  381. }
  382. }
  383. }
  384. static void __init setup_memory_end(void)
  385. {
  386. unsigned long vmax, vmalloc_size, tmp;
  387. /* Choose kernel address space layout: 2, 3, or 4 levels. */
  388. vmalloc_size = VMALLOC_END ?: (128UL << 30) - MODULES_LEN;
  389. tmp = (memory_end ?: max_physmem_end) / PAGE_SIZE;
  390. tmp = tmp * (sizeof(struct page) + PAGE_SIZE);
  391. if (tmp + vmalloc_size + MODULES_LEN <= (1UL << 42))
  392. vmax = 1UL << 42; /* 3-level kernel page table */
  393. else
  394. vmax = 1UL << 53; /* 4-level kernel page table */
  395. /* module area is at the end of the kernel address space. */
  396. MODULES_END = vmax;
  397. MODULES_VADDR = MODULES_END - MODULES_LEN;
  398. VMALLOC_END = MODULES_VADDR;
  399. VMALLOC_START = vmax - vmalloc_size;
  400. /* Split remaining virtual space between 1:1 mapping & vmemmap array */
  401. tmp = VMALLOC_START / (PAGE_SIZE + sizeof(struct page));
  402. /* vmemmap contains a multiple of PAGES_PER_SECTION struct pages */
  403. tmp = SECTION_ALIGN_UP(tmp);
  404. tmp = VMALLOC_START - tmp * sizeof(struct page);
  405. tmp &= ~((vmax >> 11) - 1); /* align to page table level */
  406. tmp = min(tmp, 1UL << MAX_PHYSMEM_BITS);
  407. vmemmap = (struct page *) tmp;
  408. /* Take care that memory_end is set and <= vmemmap */
  409. memory_end = min(memory_end ?: max_physmem_end, tmp);
  410. max_pfn = max_low_pfn = PFN_DOWN(memory_end);
  411. memblock_remove(memory_end, ULONG_MAX);
  412. pr_notice("Max memory size: %luMB\n", memory_end >> 20);
  413. }
  414. static void __init setup_vmcoreinfo(void)
  415. {
  416. mem_assign_absolute(S390_lowcore.vmcore_info, paddr_vmcoreinfo_note());
  417. }
  418. #ifdef CONFIG_CRASH_DUMP
  419. /*
  420. * When kdump is enabled, we have to ensure that no memory from
  421. * the area [0 - crashkernel memory size] and
  422. * [crashk_res.start - crashk_res.end] is set offline.
  423. */
  424. static int kdump_mem_notifier(struct notifier_block *nb,
  425. unsigned long action, void *data)
  426. {
  427. struct memory_notify *arg = data;
  428. if (action != MEM_GOING_OFFLINE)
  429. return NOTIFY_OK;
  430. if (arg->start_pfn < PFN_DOWN(resource_size(&crashk_res)))
  431. return NOTIFY_BAD;
  432. if (arg->start_pfn > PFN_DOWN(crashk_res.end))
  433. return NOTIFY_OK;
  434. if (arg->start_pfn + arg->nr_pages - 1 < PFN_DOWN(crashk_res.start))
  435. return NOTIFY_OK;
  436. return NOTIFY_BAD;
  437. }
  438. static struct notifier_block kdump_mem_nb = {
  439. .notifier_call = kdump_mem_notifier,
  440. };
  441. #endif
  442. /*
  443. * Make sure that the area behind memory_end is protected
  444. */
  445. static void reserve_memory_end(void)
  446. {
  447. #ifdef CONFIG_CRASH_DUMP
  448. if (ipl_info.type == IPL_TYPE_FCP_DUMP &&
  449. !OLDMEM_BASE && sclp.hsa_size) {
  450. memory_end = sclp.hsa_size;
  451. memory_end &= PAGE_MASK;
  452. memory_end_set = 1;
  453. }
  454. #endif
  455. if (!memory_end_set)
  456. return;
  457. memblock_reserve(memory_end, ULONG_MAX);
  458. }
  459. /*
  460. * Make sure that oldmem, where the dump is stored, is protected
  461. */
  462. static void reserve_oldmem(void)
  463. {
  464. #ifdef CONFIG_CRASH_DUMP
  465. if (OLDMEM_BASE)
  466. /* Forget all memory above the running kdump system */
  467. memblock_reserve(OLDMEM_SIZE, (phys_addr_t)ULONG_MAX);
  468. #endif
  469. }
  470. /*
  471. * Make sure that oldmem, where the dump is stored, is protected
  472. */
  473. static void remove_oldmem(void)
  474. {
  475. #ifdef CONFIG_CRASH_DUMP
  476. if (OLDMEM_BASE)
  477. /* Forget all memory above the running kdump system */
  478. memblock_remove(OLDMEM_SIZE, (phys_addr_t)ULONG_MAX);
  479. #endif
  480. }
  481. /*
  482. * Reserve memory for kdump kernel to be loaded with kexec
  483. */
  484. static void __init reserve_crashkernel(void)
  485. {
  486. #ifdef CONFIG_CRASH_DUMP
  487. unsigned long long crash_base, crash_size;
  488. phys_addr_t low, high;
  489. int rc;
  490. rc = parse_crashkernel(boot_command_line, memory_end, &crash_size,
  491. &crash_base);
  492. crash_base = ALIGN(crash_base, KEXEC_CRASH_MEM_ALIGN);
  493. crash_size = ALIGN(crash_size, KEXEC_CRASH_MEM_ALIGN);
  494. if (rc || crash_size == 0)
  495. return;
  496. if (memblock.memory.regions[0].size < crash_size) {
  497. pr_info("crashkernel reservation failed: %s\n",
  498. "first memory chunk must be at least crashkernel size");
  499. return;
  500. }
  501. low = crash_base ?: OLDMEM_BASE;
  502. high = low + crash_size;
  503. if (low >= OLDMEM_BASE && high <= OLDMEM_BASE + OLDMEM_SIZE) {
  504. /* The crashkernel fits into OLDMEM, reuse OLDMEM */
  505. crash_base = low;
  506. } else {
  507. /* Find suitable area in free memory */
  508. low = max_t(unsigned long, crash_size, sclp.hsa_size);
  509. high = crash_base ? crash_base + crash_size : ULONG_MAX;
  510. if (crash_base && crash_base < low) {
  511. pr_info("crashkernel reservation failed: %s\n",
  512. "crash_base too low");
  513. return;
  514. }
  515. low = crash_base ?: low;
  516. crash_base = memblock_find_in_range(low, high, crash_size,
  517. KEXEC_CRASH_MEM_ALIGN);
  518. }
  519. if (!crash_base) {
  520. pr_info("crashkernel reservation failed: %s\n",
  521. "no suitable area found");
  522. return;
  523. }
  524. if (register_memory_notifier(&kdump_mem_nb))
  525. return;
  526. if (!OLDMEM_BASE && MACHINE_IS_VM)
  527. diag10_range(PFN_DOWN(crash_base), PFN_DOWN(crash_size));
  528. crashk_res.start = crash_base;
  529. crashk_res.end = crash_base + crash_size - 1;
  530. insert_resource(&iomem_resource, &crashk_res);
  531. memblock_remove(crash_base, crash_size);
  532. pr_info("Reserving %lluMB of memory at %lluMB "
  533. "for crashkernel (System RAM: %luMB)\n",
  534. crash_size >> 20, crash_base >> 20,
  535. (unsigned long)memblock.memory.total_size >> 20);
  536. os_info_crashkernel_add(crash_base, crash_size);
  537. #endif
  538. }
  539. /*
  540. * Reserve the initrd from being used by memblock
  541. */
  542. static void __init reserve_initrd(void)
  543. {
  544. #ifdef CONFIG_BLK_DEV_INITRD
  545. initrd_start = INITRD_START;
  546. initrd_end = initrd_start + INITRD_SIZE;
  547. memblock_reserve(INITRD_START, INITRD_SIZE);
  548. #endif
  549. }
  550. /*
  551. * Check for initrd being in usable memory
  552. */
  553. static void __init check_initrd(void)
  554. {
  555. #ifdef CONFIG_BLK_DEV_INITRD
  556. if (INITRD_START && INITRD_SIZE &&
  557. !memblock_is_region_memory(INITRD_START, INITRD_SIZE)) {
  558. pr_err("initrd does not fit memory.\n");
  559. memblock_free(INITRD_START, INITRD_SIZE);
  560. initrd_start = initrd_end = 0;
  561. }
  562. #endif
  563. }
  564. /*
  565. * Reserve memory used for lowcore/command line/kernel image.
  566. */
  567. static void __init reserve_kernel(void)
  568. {
  569. unsigned long start_pfn = PFN_UP(__pa(&_end));
  570. #ifdef CONFIG_DMA_API_DEBUG
  571. /*
  572. * DMA_API_DEBUG code stumbles over addresses from the
  573. * range [_ehead, _stext]. Mark the memory as reserved
  574. * so it is not used for CONFIG_DMA_API_DEBUG=y.
  575. */
  576. memblock_reserve(0, PFN_PHYS(start_pfn));
  577. #else
  578. memblock_reserve(0, (unsigned long)_ehead);
  579. memblock_reserve((unsigned long)_stext, PFN_PHYS(start_pfn)
  580. - (unsigned long)_stext);
  581. #endif
  582. }
  583. static void __init setup_memory(void)
  584. {
  585. struct memblock_region *reg;
  586. /*
  587. * Init storage key for present memory
  588. */
  589. for_each_memblock(memory, reg) {
  590. storage_key_init_range(reg->base, reg->base + reg->size);
  591. }
  592. psw_set_key(PAGE_DEFAULT_KEY);
  593. /* Only cosmetics */
  594. memblock_enforce_memory_limit(memblock_end_of_DRAM());
  595. }
  596. /*
  597. * Setup hardware capabilities.
  598. */
  599. static int __init setup_hwcaps(void)
  600. {
  601. static const int stfl_bits[6] = { 0, 2, 7, 17, 19, 21 };
  602. struct cpuid cpu_id;
  603. int i;
  604. /*
  605. * The store facility list bits numbers as found in the principles
  606. * of operation are numbered with bit 1UL<<31 as number 0 to
  607. * bit 1UL<<0 as number 31.
  608. * Bit 0: instructions named N3, "backported" to esa-mode
  609. * Bit 2: z/Architecture mode is active
  610. * Bit 7: the store-facility-list-extended facility is installed
  611. * Bit 17: the message-security assist is installed
  612. * Bit 19: the long-displacement facility is installed
  613. * Bit 21: the extended-immediate facility is installed
  614. * Bit 22: extended-translation facility 3 is installed
  615. * Bit 30: extended-translation facility 3 enhancement facility
  616. * These get translated to:
  617. * HWCAP_S390_ESAN3 bit 0, HWCAP_S390_ZARCH bit 1,
  618. * HWCAP_S390_STFLE bit 2, HWCAP_S390_MSA bit 3,
  619. * HWCAP_S390_LDISP bit 4, HWCAP_S390_EIMM bit 5 and
  620. * HWCAP_S390_ETF3EH bit 8 (22 && 30).
  621. */
  622. for (i = 0; i < 6; i++)
  623. if (test_facility(stfl_bits[i]))
  624. elf_hwcap |= 1UL << i;
  625. if (test_facility(22) && test_facility(30))
  626. elf_hwcap |= HWCAP_S390_ETF3EH;
  627. /*
  628. * Check for additional facilities with store-facility-list-extended.
  629. * stfle stores doublewords (8 byte) with bit 1ULL<<63 as bit 0
  630. * and 1ULL<<0 as bit 63. Bits 0-31 contain the same information
  631. * as stored by stfl, bits 32-xxx contain additional facilities.
  632. * How many facility words are stored depends on the number of
  633. * doublewords passed to the instruction. The additional facilities
  634. * are:
  635. * Bit 42: decimal floating point facility is installed
  636. * Bit 44: perform floating point operation facility is installed
  637. * translated to:
  638. * HWCAP_S390_DFP bit 6 (42 && 44).
  639. */
  640. if ((elf_hwcap & (1UL << 2)) && test_facility(42) && test_facility(44))
  641. elf_hwcap |= HWCAP_S390_DFP;
  642. /*
  643. * Huge page support HWCAP_S390_HPAGE is bit 7.
  644. */
  645. if (MACHINE_HAS_HPAGE)
  646. elf_hwcap |= HWCAP_S390_HPAGE;
  647. /*
  648. * 64-bit register support for 31-bit processes
  649. * HWCAP_S390_HIGH_GPRS is bit 9.
  650. */
  651. elf_hwcap |= HWCAP_S390_HIGH_GPRS;
  652. /*
  653. * Transactional execution support HWCAP_S390_TE is bit 10.
  654. */
  655. if (test_facility(50) && test_facility(73))
  656. elf_hwcap |= HWCAP_S390_TE;
  657. /*
  658. * Vector extension HWCAP_S390_VXRS is bit 11. The Vector extension
  659. * can be disabled with the "novx" parameter. Use MACHINE_HAS_VX
  660. * instead of facility bit 129.
  661. */
  662. if (MACHINE_HAS_VX)
  663. elf_hwcap |= HWCAP_S390_VXRS;
  664. get_cpu_id(&cpu_id);
  665. add_device_randomness(&cpu_id, sizeof(cpu_id));
  666. switch (cpu_id.machine) {
  667. case 0x2064:
  668. case 0x2066:
  669. default: /* Use "z900" as default for 64 bit kernels. */
  670. strcpy(elf_platform, "z900");
  671. break;
  672. case 0x2084:
  673. case 0x2086:
  674. strcpy(elf_platform, "z990");
  675. break;
  676. case 0x2094:
  677. case 0x2096:
  678. strcpy(elf_platform, "z9-109");
  679. break;
  680. case 0x2097:
  681. case 0x2098:
  682. strcpy(elf_platform, "z10");
  683. break;
  684. case 0x2817:
  685. case 0x2818:
  686. strcpy(elf_platform, "z196");
  687. break;
  688. case 0x2827:
  689. case 0x2828:
  690. strcpy(elf_platform, "zEC12");
  691. break;
  692. case 0x2964:
  693. strcpy(elf_platform, "z13");
  694. break;
  695. }
  696. /*
  697. * Virtualization support HWCAP_INT_SIE is bit 0.
  698. */
  699. if (sclp.has_sief2)
  700. int_hwcap |= HWCAP_INT_SIE;
  701. return 0;
  702. }
  703. arch_initcall(setup_hwcaps);
  704. /*
  705. * Add system information as device randomness
  706. */
  707. static void __init setup_randomness(void)
  708. {
  709. struct sysinfo_3_2_2 *vmms;
  710. vmms = (struct sysinfo_3_2_2 *) alloc_page(GFP_KERNEL);
  711. if (vmms && stsi(vmms, 3, 2, 2) == 0 && vmms->count)
  712. add_device_randomness(&vmms, vmms->count);
  713. free_page((unsigned long) vmms);
  714. }
  715. /*
  716. * Setup function called from init/main.c just after the banner
  717. * was printed.
  718. */
  719. void __init setup_arch(char **cmdline_p)
  720. {
  721. /*
  722. * print what head.S has found out about the machine
  723. */
  724. if (MACHINE_IS_VM)
  725. pr_info("Linux is running as a z/VM "
  726. "guest operating system in 64-bit mode\n");
  727. else if (MACHINE_IS_KVM)
  728. pr_info("Linux is running under KVM in 64-bit mode\n");
  729. else if (MACHINE_IS_LPAR)
  730. pr_info("Linux is running natively in 64-bit mode\n");
  731. /* Have one command line that is parsed and saved in /proc/cmdline */
  732. /* boot_command_line has been already set up in early.c */
  733. *cmdline_p = boot_command_line;
  734. ROOT_DEV = Root_RAM0;
  735. /* Is init_mm really needed? */
  736. init_mm.start_code = PAGE_OFFSET;
  737. init_mm.end_code = (unsigned long) &_etext;
  738. init_mm.end_data = (unsigned long) &_edata;
  739. init_mm.brk = (unsigned long) &_end;
  740. parse_early_param();
  741. #ifdef CONFIG_CRASH_DUMP
  742. /* Deactivate elfcorehdr= kernel parameter */
  743. elfcorehdr_addr = ELFCORE_ADDR_MAX;
  744. #endif
  745. os_info_init();
  746. setup_ipl();
  747. /* Do some memory reservations *before* memory is added to memblock */
  748. reserve_memory_end();
  749. reserve_oldmem();
  750. reserve_kernel();
  751. reserve_initrd();
  752. memblock_allow_resize();
  753. /* Get information about *all* installed memory */
  754. detect_memory_memblock();
  755. remove_oldmem();
  756. /*
  757. * Make sure all chunks are MAX_ORDER aligned so we don't need the
  758. * extra checks that HOLES_IN_ZONE would require.
  759. *
  760. * Is this still required?
  761. */
  762. memblock_trim_memory(1UL << (MAX_ORDER - 1 + PAGE_SHIFT));
  763. setup_memory_end();
  764. setup_memory();
  765. check_initrd();
  766. reserve_crashkernel();
  767. #ifdef CONFIG_CRASH_DUMP
  768. /*
  769. * Be aware that smp_save_dump_cpus() triggers a system reset.
  770. * Therefore CPU and device initialization should be done afterwards.
  771. */
  772. smp_save_dump_cpus();
  773. #endif
  774. setup_resources();
  775. setup_vmcoreinfo();
  776. setup_lowcore();
  777. smp_fill_possible_mask();
  778. cpu_init();
  779. numa_setup();
  780. /*
  781. * Create kernel page tables and switch to virtual addressing.
  782. */
  783. paging_init();
  784. /* Setup default console */
  785. conmode_default();
  786. set_preferred_console();
  787. /* Setup zfcpdump support */
  788. setup_zfcpdump();
  789. /* Add system specific data to the random pool */
  790. setup_randomness();
  791. }