linux_kernel/drivers/irqchip/irq-gic-common.c

/*
 * Copyright (C) 2002 ARM Limited, All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip/arm-gic.h>

#include "irq-gic-common.h"

void gic_configure_irq(unsigned int irq, unsigned int type,
		       void __iomem *base, void (*sync_access)(void))
{
	u32 enablemask = 1 << (irq % 32);
	u32 enableoff = (irq / 32) * 4;
	u32 confmask = 0x2 << ((irq % 16) * 2);
	u32 confoff = (irq / 16) * 4;
	bool enabled = false;
	u32 val;

	/*
	 * Read current configuration register, and insert the config
	 * for "irq", depending on "type".
	 */
	val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
	if (type == IRQ_TYPE_LEVEL_HIGH)
		val &= ~confmask;
	else if (type == IRQ_TYPE_EDGE_RISING)
		val |= confmask;

	/*
	 * As recommended by the spec, disable the interrupt before changing
	 * the configuration
	 */
	if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
		if (sync_access)
			sync_access();
		enabled = true;
	}

	/*
	 * Write back the new configuration, and possibly re-enable
	 * the interrupt.
	 */
	writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);

	if (enabled)
		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);

	if (sync_access)
		sync_access();
}

void __init gic_dist_config(void __iomem *base, int gic_irqs,
			    void (*sync_access)(void))
{
	unsigned int i;

	/*
	 * Set all global interrupts to be level triggered, active low.
	 */
	for (i = 32; i < gic_irqs; i += 16)
		writel_relaxed(0, base + GIC_DIST_CONFIG + i / 4);

	/*
	 * Set priority on all global interrupts.
	 */
	for (i = 32; i < gic_irqs; i += 4)
		writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i);

	/*
	 * Disable all interrupts.  Leave the PPI and SGIs alone
	 * as they are enabled by redistributor registers.
	 */
	for (i = 32; i < gic_irqs; i += 32)
		writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i / 8);

	if (sync_access)
		sync_access();
}

void gic_cpu_config(void __iomem *base, void (*sync_access)(void))
{
	int i;

	/*
	 * Deal with the banked PPI and SGI interrupts - disable all
	 * PPI interrupts, ensure all SGI interrupts are enabled.
	 */
	writel_relaxed(0xffff0000, base + GIC_DIST_ENABLE_CLEAR);
	writel_relaxed(0x0000ffff, base + GIC_DIST_ENABLE_SET);

	/*
	 * Set priority on PPI and SGI interrupts
	 */
	for (i = 0; i < 32; i += 4)
		writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);

	if (sync_access)
		sync_access();
}