spi-oc-tiny.c 8.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367
  1. /*
  2. * OpenCores tiny SPI master driver
  3. *
  4. * http://opencores.org/project,tiny_spi
  5. *
  6. * Copyright (C) 2011 Thomas Chou <thomas@wytron.com.tw>
  7. *
  8. * Based on spi_s3c24xx.c, which is:
  9. * Copyright (c) 2006 Ben Dooks
  10. * Copyright (c) 2006 Simtec Electronics
  11. * Ben Dooks <ben@simtec.co.uk>
  12. *
  13. * This program is free software; you can redistribute it and/or modify
  14. * it under the terms of the GNU General Public License version 2 as
  15. * published by the Free Software Foundation.
  16. */
  17. #include <linux/init.h>
  18. #include <linux/interrupt.h>
  19. #include <linux/errno.h>
  20. #include <linux/module.h>
  21. #include <linux/platform_device.h>
  22. #include <linux/spi/spi.h>
  23. #include <linux/spi/spi_bitbang.h>
  24. #include <linux/spi/spi_oc_tiny.h>
  25. #include <linux/io.h>
  26. #include <linux/gpio.h>
  27. #include <linux/of.h>
  28. #define DRV_NAME "spi_oc_tiny"
  29. #define TINY_SPI_RXDATA 0
  30. #define TINY_SPI_TXDATA 4
  31. #define TINY_SPI_STATUS 8
  32. #define TINY_SPI_CONTROL 12
  33. #define TINY_SPI_BAUD 16
  34. #define TINY_SPI_STATUS_TXE 0x1
  35. #define TINY_SPI_STATUS_TXR 0x2
  36. struct tiny_spi {
  37. /* bitbang has to be first */
  38. struct spi_bitbang bitbang;
  39. struct completion done;
  40. void __iomem *base;
  41. int irq;
  42. unsigned int freq;
  43. unsigned int baudwidth;
  44. unsigned int baud;
  45. unsigned int speed_hz;
  46. unsigned int mode;
  47. unsigned int len;
  48. unsigned int txc, rxc;
  49. const u8 *txp;
  50. u8 *rxp;
  51. int gpio_cs_count;
  52. int *gpio_cs;
  53. };
  54. static inline struct tiny_spi *tiny_spi_to_hw(struct spi_device *sdev)
  55. {
  56. return spi_master_get_devdata(sdev->master);
  57. }
  58. static unsigned int tiny_spi_baud(struct spi_device *spi, unsigned int hz)
  59. {
  60. struct tiny_spi *hw = tiny_spi_to_hw(spi);
  61. return min(DIV_ROUND_UP(hw->freq, hz * 2), (1U << hw->baudwidth)) - 1;
  62. }
  63. static void tiny_spi_chipselect(struct spi_device *spi, int is_active)
  64. {
  65. struct tiny_spi *hw = tiny_spi_to_hw(spi);
  66. if (hw->gpio_cs_count > 0) {
  67. gpio_set_value(hw->gpio_cs[spi->chip_select],
  68. (spi->mode & SPI_CS_HIGH) ? is_active : !is_active);
  69. }
  70. }
  71. static int tiny_spi_setup_transfer(struct spi_device *spi,
  72. struct spi_transfer *t)
  73. {
  74. struct tiny_spi *hw = tiny_spi_to_hw(spi);
  75. unsigned int baud = hw->baud;
  76. if (t) {
  77. if (t->speed_hz && t->speed_hz != hw->speed_hz)
  78. baud = tiny_spi_baud(spi, t->speed_hz);
  79. }
  80. writel(baud, hw->base + TINY_SPI_BAUD);
  81. writel(hw->mode, hw->base + TINY_SPI_CONTROL);
  82. return 0;
  83. }
  84. static int tiny_spi_setup(struct spi_device *spi)
  85. {
  86. struct tiny_spi *hw = tiny_spi_to_hw(spi);
  87. if (spi->max_speed_hz != hw->speed_hz) {
  88. hw->speed_hz = spi->max_speed_hz;
  89. hw->baud = tiny_spi_baud(spi, hw->speed_hz);
  90. }
  91. hw->mode = spi->mode & (SPI_CPOL | SPI_CPHA);
  92. return 0;
  93. }
  94. static inline void tiny_spi_wait_txr(struct tiny_spi *hw)
  95. {
  96. while (!(readb(hw->base + TINY_SPI_STATUS) &
  97. TINY_SPI_STATUS_TXR))
  98. cpu_relax();
  99. }
  100. static inline void tiny_spi_wait_txe(struct tiny_spi *hw)
  101. {
  102. while (!(readb(hw->base + TINY_SPI_STATUS) &
  103. TINY_SPI_STATUS_TXE))
  104. cpu_relax();
  105. }
  106. static int tiny_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
  107. {
  108. struct tiny_spi *hw = tiny_spi_to_hw(spi);
  109. const u8 *txp = t->tx_buf;
  110. u8 *rxp = t->rx_buf;
  111. unsigned int i;
  112. if (hw->irq >= 0) {
  113. /* use interrupt driven data transfer */
  114. hw->len = t->len;
  115. hw->txp = t->tx_buf;
  116. hw->rxp = t->rx_buf;
  117. hw->txc = 0;
  118. hw->rxc = 0;
  119. /* send the first byte */
  120. if (t->len > 1) {
  121. writeb(hw->txp ? *hw->txp++ : 0,
  122. hw->base + TINY_SPI_TXDATA);
  123. hw->txc++;
  124. writeb(hw->txp ? *hw->txp++ : 0,
  125. hw->base + TINY_SPI_TXDATA);
  126. hw->txc++;
  127. writeb(TINY_SPI_STATUS_TXR, hw->base + TINY_SPI_STATUS);
  128. } else {
  129. writeb(hw->txp ? *hw->txp++ : 0,
  130. hw->base + TINY_SPI_TXDATA);
  131. hw->txc++;
  132. writeb(TINY_SPI_STATUS_TXE, hw->base + TINY_SPI_STATUS);
  133. }
  134. wait_for_completion(&hw->done);
  135. } else {
  136. /* we need to tighten the transfer loop */
  137. writeb(txp ? *txp++ : 0, hw->base + TINY_SPI_TXDATA);
  138. for (i = 1; i < t->len; i++) {
  139. writeb(txp ? *txp++ : 0, hw->base + TINY_SPI_TXDATA);
  140. if (rxp || (i != t->len - 1))
  141. tiny_spi_wait_txr(hw);
  142. if (rxp)
  143. *rxp++ = readb(hw->base + TINY_SPI_TXDATA);
  144. }
  145. tiny_spi_wait_txe(hw);
  146. if (rxp)
  147. *rxp++ = readb(hw->base + TINY_SPI_RXDATA);
  148. }
  149. return t->len;
  150. }
  151. static irqreturn_t tiny_spi_irq(int irq, void *dev)
  152. {
  153. struct tiny_spi *hw = dev;
  154. writeb(0, hw->base + TINY_SPI_STATUS);
  155. if (hw->rxc + 1 == hw->len) {
  156. if (hw->rxp)
  157. *hw->rxp++ = readb(hw->base + TINY_SPI_RXDATA);
  158. hw->rxc++;
  159. complete(&hw->done);
  160. } else {
  161. if (hw->rxp)
  162. *hw->rxp++ = readb(hw->base + TINY_SPI_TXDATA);
  163. hw->rxc++;
  164. if (hw->txc < hw->len) {
  165. writeb(hw->txp ? *hw->txp++ : 0,
  166. hw->base + TINY_SPI_TXDATA);
  167. hw->txc++;
  168. writeb(TINY_SPI_STATUS_TXR,
  169. hw->base + TINY_SPI_STATUS);
  170. } else {
  171. writeb(TINY_SPI_STATUS_TXE,
  172. hw->base + TINY_SPI_STATUS);
  173. }
  174. }
  175. return IRQ_HANDLED;
  176. }
  177. #ifdef CONFIG_OF
  178. #include <linux/of_gpio.h>
  179. static int tiny_spi_of_probe(struct platform_device *pdev)
  180. {
  181. struct tiny_spi *hw = platform_get_drvdata(pdev);
  182. struct device_node *np = pdev->dev.of_node;
  183. unsigned int i;
  184. const __be32 *val;
  185. int len;
  186. if (!np)
  187. return 0;
  188. hw->gpio_cs_count = of_gpio_count(np);
  189. if (hw->gpio_cs_count > 0) {
  190. hw->gpio_cs = devm_kzalloc(&pdev->dev,
  191. hw->gpio_cs_count * sizeof(unsigned int),
  192. GFP_KERNEL);
  193. if (!hw->gpio_cs)
  194. return -ENOMEM;
  195. }
  196. for (i = 0; i < hw->gpio_cs_count; i++) {
  197. hw->gpio_cs[i] = of_get_gpio_flags(np, i, NULL);
  198. if (hw->gpio_cs[i] < 0)
  199. return -ENODEV;
  200. }
  201. hw->bitbang.master->dev.of_node = pdev->dev.of_node;
  202. val = of_get_property(pdev->dev.of_node,
  203. "clock-frequency", &len);
  204. if (val && len >= sizeof(__be32))
  205. hw->freq = be32_to_cpup(val);
  206. val = of_get_property(pdev->dev.of_node, "baud-width", &len);
  207. if (val && len >= sizeof(__be32))
  208. hw->baudwidth = be32_to_cpup(val);
  209. return 0;
  210. }
  211. #else /* !CONFIG_OF */
  212. static int tiny_spi_of_probe(struct platform_device *pdev)
  213. {
  214. return 0;
  215. }
  216. #endif /* CONFIG_OF */
  217. static int tiny_spi_probe(struct platform_device *pdev)
  218. {
  219. struct tiny_spi_platform_data *platp = dev_get_platdata(&pdev->dev);
  220. struct tiny_spi *hw;
  221. struct spi_master *master;
  222. struct resource *res;
  223. unsigned int i;
  224. int err = -ENODEV;
  225. master = spi_alloc_master(&pdev->dev, sizeof(struct tiny_spi));
  226. if (!master)
  227. return err;
  228. /* setup the master state. */
  229. master->bus_num = pdev->id;
  230. master->num_chipselect = 255;
  231. master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
  232. master->setup = tiny_spi_setup;
  233. hw = spi_master_get_devdata(master);
  234. platform_set_drvdata(pdev, hw);
  235. /* setup the state for the bitbang driver */
  236. hw->bitbang.master = master;
  237. if (!hw->bitbang.master)
  238. return err;
  239. hw->bitbang.setup_transfer = tiny_spi_setup_transfer;
  240. hw->bitbang.chipselect = tiny_spi_chipselect;
  241. hw->bitbang.txrx_bufs = tiny_spi_txrx_bufs;
  242. /* find and map our resources */
  243. res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  244. hw->base = devm_ioremap_resource(&pdev->dev, res);
  245. if (IS_ERR(hw->base)) {
  246. err = PTR_ERR(hw->base);
  247. goto exit;
  248. }
  249. /* irq is optional */
  250. hw->irq = platform_get_irq(pdev, 0);
  251. if (hw->irq >= 0) {
  252. init_completion(&hw->done);
  253. err = devm_request_irq(&pdev->dev, hw->irq, tiny_spi_irq, 0,
  254. pdev->name, hw);
  255. if (err)
  256. goto exit;
  257. }
  258. /* find platform data */
  259. if (platp) {
  260. hw->gpio_cs_count = platp->gpio_cs_count;
  261. hw->gpio_cs = platp->gpio_cs;
  262. if (platp->gpio_cs_count && !platp->gpio_cs) {
  263. err = -EBUSY;
  264. goto exit;
  265. }
  266. hw->freq = platp->freq;
  267. hw->baudwidth = platp->baudwidth;
  268. } else {
  269. err = tiny_spi_of_probe(pdev);
  270. if (err)
  271. goto exit;
  272. }
  273. for (i = 0; i < hw->gpio_cs_count; i++) {
  274. err = gpio_request(hw->gpio_cs[i], dev_name(&pdev->dev));
  275. if (err)
  276. goto exit_gpio;
  277. gpio_direction_output(hw->gpio_cs[i], 1);
  278. }
  279. hw->bitbang.master->num_chipselect = max(1, hw->gpio_cs_count);
  280. /* register our spi controller */
  281. err = spi_bitbang_start(&hw->bitbang);
  282. if (err)
  283. goto exit;
  284. dev_info(&pdev->dev, "base %p, irq %d\n", hw->base, hw->irq);
  285. return 0;
  286. exit_gpio:
  287. while (i-- > 0)
  288. gpio_free(hw->gpio_cs[i]);
  289. exit:
  290. spi_master_put(master);
  291. return err;
  292. }
  293. static int tiny_spi_remove(struct platform_device *pdev)
  294. {
  295. struct tiny_spi *hw = platform_get_drvdata(pdev);
  296. struct spi_master *master = hw->bitbang.master;
  297. unsigned int i;
  298. spi_bitbang_stop(&hw->bitbang);
  299. for (i = 0; i < hw->gpio_cs_count; i++)
  300. gpio_free(hw->gpio_cs[i]);
  301. spi_master_put(master);
  302. return 0;
  303. }
  304. #ifdef CONFIG_OF
  305. static const struct of_device_id tiny_spi_match[] = {
  306. { .compatible = "opencores,tiny-spi-rtlsvn2", },
  307. {},
  308. };
  309. MODULE_DEVICE_TABLE(of, tiny_spi_match);
  310. #endif /* CONFIG_OF */
  311. static struct platform_driver tiny_spi_driver = {
  312. .probe = tiny_spi_probe,
  313. .remove = tiny_spi_remove,
  314. .driver = {
  315. .name = DRV_NAME,
  316. .owner = THIS_MODULE,
  317. .pm = NULL,
  318. .of_match_table = of_match_ptr(tiny_spi_match),
  319. },
  320. };
  321. module_platform_driver(tiny_spi_driver);
  322. MODULE_DESCRIPTION("OpenCores tiny SPI driver");
  323. MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
  324. MODULE_LICENSE("GPL");
  325. MODULE_ALIAS("platform:" DRV_NAME);