init.c 8.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348
  1. /*
  2. * Based on arch/arm/mm/init.c
  3. *
  4. * Copyright (C) 1995-2005 Russell King
  5. * Copyright (C) 2012 ARM Ltd.
  6. *
  7. * This program is free software; you can redistribute it and/or modify
  8. * it under the terms of the GNU General Public License version 2 as
  9. * published by the Free Software Foundation.
  10. *
  11. * This program is distributed in the hope that it will be useful,
  12. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  14. * GNU General Public License for more details.
  15. *
  16. * You should have received a copy of the GNU General Public License
  17. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  18. */
  19. #include <linux/kernel.h>
  20. #include <linux/export.h>
  21. #include <linux/errno.h>
  22. #include <linux/swap.h>
  23. #include <linux/init.h>
  24. #include <linux/bootmem.h>
  25. #include <linux/mman.h>
  26. #include <linux/nodemask.h>
  27. #include <linux/initrd.h>
  28. #include <linux/gfp.h>
  29. #include <linux/memblock.h>
  30. #include <linux/sort.h>
  31. #include <linux/of_fdt.h>
  32. #include <linux/dma-contiguous.h>
  33. #include <asm/sections.h>
  34. #include <asm/setup.h>
  35. #include <asm/sizes.h>
  36. #include <asm/tlb.h>
  37. #include "mm.h"
  38. phys_addr_t memstart_addr __read_mostly = 0;
  39. #ifdef CONFIG_BLK_DEV_INITRD
  40. static int __init early_initrd(char *p)
  41. {
  42. unsigned long start, size;
  43. char *endp;
  44. start = memparse(p, &endp);
  45. if (*endp == ',') {
  46. size = memparse(endp + 1, NULL);
  47. initrd_start = (unsigned long)__va(start);
  48. initrd_end = (unsigned long)__va(start + size);
  49. }
  50. return 0;
  51. }
  52. early_param("initrd", early_initrd);
  53. #endif
  54. #define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT)
  55. static void __init zone_sizes_init(unsigned long min, unsigned long max)
  56. {
  57. struct memblock_region *reg;
  58. unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
  59. unsigned long max_dma32 = min;
  60. memset(zone_size, 0, sizeof(zone_size));
  61. #ifdef CONFIG_ZONE_DMA32
  62. /* 4GB maximum for 32-bit only capable devices */
  63. max_dma32 = max(min, min(max, MAX_DMA32_PFN));
  64. zone_size[ZONE_DMA32] = max_dma32 - min;
  65. #endif
  66. zone_size[ZONE_NORMAL] = max - max_dma32;
  67. memcpy(zhole_size, zone_size, sizeof(zhole_size));
  68. for_each_memblock(memory, reg) {
  69. unsigned long start = memblock_region_memory_base_pfn(reg);
  70. unsigned long end = memblock_region_memory_end_pfn(reg);
  71. if (start >= max)
  72. continue;
  73. #ifdef CONFIG_ZONE_DMA32
  74. if (start < max_dma32) {
  75. unsigned long dma_end = min(end, max_dma32);
  76. zhole_size[ZONE_DMA32] -= dma_end - start;
  77. }
  78. #endif
  79. if (end > max_dma32) {
  80. unsigned long normal_end = min(end, max);
  81. unsigned long normal_start = max(start, max_dma32);
  82. zhole_size[ZONE_NORMAL] -= normal_end - normal_start;
  83. }
  84. }
  85. free_area_init_node(0, zone_size, min, zhole_size);
  86. }
  87. #ifdef CONFIG_HAVE_ARCH_PFN_VALID
  88. int pfn_valid(unsigned long pfn)
  89. {
  90. return memblock_is_memory(pfn << PAGE_SHIFT);
  91. }
  92. EXPORT_SYMBOL(pfn_valid);
  93. #endif
  94. #ifndef CONFIG_SPARSEMEM
  95. static void arm64_memory_present(void)
  96. {
  97. }
  98. #else
  99. static void arm64_memory_present(void)
  100. {
  101. struct memblock_region *reg;
  102. for_each_memblock(memory, reg)
  103. memory_present(0, memblock_region_memory_base_pfn(reg),
  104. memblock_region_memory_end_pfn(reg));
  105. }
  106. #endif
  107. void __init arm64_memblock_init(void)
  108. {
  109. u64 *reserve_map, base, size;
  110. /* Register the kernel text, kernel data and initrd with memblock */
  111. memblock_reserve(__pa(_text), _end - _text);
  112. #ifdef CONFIG_BLK_DEV_INITRD
  113. if (initrd_start)
  114. memblock_reserve(__virt_to_phys(initrd_start), initrd_end - initrd_start);
  115. #endif
  116. /*
  117. * Reserve the page tables. These are already in use,
  118. * and can only be in node 0.
  119. */
  120. memblock_reserve(__pa(swapper_pg_dir), SWAPPER_DIR_SIZE);
  121. memblock_reserve(__pa(idmap_pg_dir), IDMAP_DIR_SIZE);
  122. /* Reserve the dtb region */
  123. memblock_reserve(virt_to_phys(initial_boot_params),
  124. be32_to_cpu(initial_boot_params->totalsize));
  125. /*
  126. * Process the reserve map. This will probably overlap the initrd
  127. * and dtb locations which are already reserved, but overlapping
  128. * doesn't hurt anything
  129. */
  130. reserve_map = ((void*)initial_boot_params) +
  131. be32_to_cpu(initial_boot_params->off_mem_rsvmap);
  132. while (1) {
  133. base = be64_to_cpup(reserve_map++);
  134. size = be64_to_cpup(reserve_map++);
  135. if (!size)
  136. break;
  137. memblock_reserve(base, size);
  138. }
  139. dma_contiguous_reserve(0);
  140. memblock_allow_resize();
  141. memblock_dump_all();
  142. }
  143. void __init bootmem_init(void)
  144. {
  145. unsigned long min, max;
  146. min = PFN_UP(memblock_start_of_DRAM());
  147. max = PFN_DOWN(memblock_end_of_DRAM());
  148. /*
  149. * Sparsemem tries to allocate bootmem in memory_present(), so must be
  150. * done after the fixed reservations.
  151. */
  152. arm64_memory_present();
  153. sparse_init();
  154. zone_sizes_init(min, max);
  155. high_memory = __va((max << PAGE_SHIFT) - 1) + 1;
  156. max_pfn = max_low_pfn = max;
  157. }
  158. #ifndef CONFIG_SPARSEMEM_VMEMMAP
  159. static inline void free_memmap(unsigned long start_pfn, unsigned long end_pfn)
  160. {
  161. struct page *start_pg, *end_pg;
  162. unsigned long pg, pgend;
  163. /*
  164. * Convert start_pfn/end_pfn to a struct page pointer.
  165. */
  166. start_pg = pfn_to_page(start_pfn - 1) + 1;
  167. end_pg = pfn_to_page(end_pfn - 1) + 1;
  168. /*
  169. * Convert to physical addresses, and round start upwards and end
  170. * downwards.
  171. */
  172. pg = (unsigned long)PAGE_ALIGN(__pa(start_pg));
  173. pgend = (unsigned long)__pa(end_pg) & PAGE_MASK;
  174. /*
  175. * If there are free pages between these, free the section of the
  176. * memmap array.
  177. */
  178. if (pg < pgend)
  179. free_bootmem(pg, pgend - pg);
  180. }
  181. /*
  182. * The mem_map array can get very big. Free the unused area of the memory map.
  183. */
  184. static void __init free_unused_memmap(void)
  185. {
  186. unsigned long start, prev_end = 0;
  187. struct memblock_region *reg;
  188. for_each_memblock(memory, reg) {
  189. start = __phys_to_pfn(reg->base);
  190. #ifdef CONFIG_SPARSEMEM
  191. /*
  192. * Take care not to free memmap entries that don't exist due
  193. * to SPARSEMEM sections which aren't present.
  194. */
  195. start = min(start, ALIGN(prev_end, PAGES_PER_SECTION));
  196. #endif
  197. /*
  198. * If we had a previous bank, and there is a space between the
  199. * current bank and the previous, free it.
  200. */
  201. if (prev_end && prev_end < start)
  202. free_memmap(prev_end, start);
  203. /*
  204. * Align up here since the VM subsystem insists that the
  205. * memmap entries are valid from the bank end aligned to
  206. * MAX_ORDER_NR_PAGES.
  207. */
  208. prev_end = ALIGN(start + __phys_to_pfn(reg->size),
  209. MAX_ORDER_NR_PAGES);
  210. }
  211. #ifdef CONFIG_SPARSEMEM
  212. if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION))
  213. free_memmap(prev_end, ALIGN(prev_end, PAGES_PER_SECTION));
  214. #endif
  215. }
  216. #endif /* !CONFIG_SPARSEMEM_VMEMMAP */
  217. /*
  218. * mem_init() marks the free areas in the mem_map and tells us how much memory
  219. * is free. This is done after various parts of the system have claimed their
  220. * memory after the kernel image.
  221. */
  222. void __init mem_init(void)
  223. {
  224. arm64_swiotlb_init();
  225. max_mapnr = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;
  226. #ifndef CONFIG_SPARSEMEM_VMEMMAP
  227. free_unused_memmap();
  228. #endif
  229. /* this will put all unused low memory onto the freelists */
  230. free_all_bootmem();
  231. mem_init_print_info(NULL);
  232. #define MLK(b, t) b, t, ((t) - (b)) >> 10
  233. #define MLM(b, t) b, t, ((t) - (b)) >> 20
  234. #define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), SZ_1K)
  235. pr_notice("Virtual kernel memory layout:\n"
  236. " vmalloc : 0x%16lx - 0x%16lx (%6ld MB)\n"
  237. #ifdef CONFIG_SPARSEMEM_VMEMMAP
  238. " vmemmap : 0x%16lx - 0x%16lx (%6ld MB)\n"
  239. #endif
  240. " modules : 0x%16lx - 0x%16lx (%6ld MB)\n"
  241. " memory : 0x%16lx - 0x%16lx (%6ld MB)\n"
  242. " .init : 0x%p" " - 0x%p" " (%6ld kB)\n"
  243. " .text : 0x%p" " - 0x%p" " (%6ld kB)\n"
  244. " .data : 0x%p" " - 0x%p" " (%6ld kB)\n",
  245. MLM(VMALLOC_START, VMALLOC_END),
  246. #ifdef CONFIG_SPARSEMEM_VMEMMAP
  247. MLM((unsigned long)virt_to_page(PAGE_OFFSET),
  248. (unsigned long)virt_to_page(high_memory)),
  249. #endif
  250. MLM(MODULES_VADDR, MODULES_END),
  251. MLM(PAGE_OFFSET, (unsigned long)high_memory),
  252. MLK_ROUNDUP(__init_begin, __init_end),
  253. MLK_ROUNDUP(_text, _etext),
  254. MLK_ROUNDUP(_sdata, _edata));
  255. #undef MLK
  256. #undef MLM
  257. #undef MLK_ROUNDUP
  258. /*
  259. * Check boundaries twice: Some fundamental inconsistencies can be
  260. * detected at build time already.
  261. */
  262. #ifdef CONFIG_COMPAT
  263. BUILD_BUG_ON(TASK_SIZE_32 > TASK_SIZE_64);
  264. #endif
  265. BUILD_BUG_ON(TASK_SIZE_64 > MODULES_VADDR);
  266. BUG_ON(TASK_SIZE_64 > MODULES_VADDR);
  267. if (PAGE_SIZE >= 16384 && get_num_physpages() <= 128) {
  268. extern int sysctl_overcommit_memory;
  269. /*
  270. * On a machine this small we won't get anywhere without
  271. * overcommit, so turn it on by default.
  272. */
  273. sysctl_overcommit_memory = OVERCOMMIT_ALWAYS;
  274. }
  275. }
  276. void free_initmem(void)
  277. {
  278. free_initmem_default(0);
  279. }
  280. #ifdef CONFIG_BLK_DEV_INITRD
  281. static int keep_initrd;
  282. void free_initrd_mem(unsigned long start, unsigned long end)
  283. {
  284. if (!keep_initrd)
  285. free_reserved_area((void *)start, (void *)end, 0, "initrd");
  286. }
  287. static int __init keepinitrd_setup(char *__unused)
  288. {
  289. keep_initrd = 1;
  290. return 1;
  291. }
  292. __setup("keepinitrd", keepinitrd_setup);
  293. #endif