sta_info.h 22 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661
  1. /*
  2. * Copyright 2002-2005, Devicescape Software, Inc.
  3. * Copyright 2013-2014 Intel Mobile Communications GmbH
  4. *
  5. * This program is free software; you can redistribute it and/or modify
  6. * it under the terms of the GNU General Public License version 2 as
  7. * published by the Free Software Foundation.
  8. */
  9. #ifndef STA_INFO_H
  10. #define STA_INFO_H
  11. #include <linux/list.h>
  12. #include <linux/types.h>
  13. #include <linux/if_ether.h>
  14. #include <linux/workqueue.h>
  15. #include <linux/average.h>
  16. #include <linux/etherdevice.h>
  17. #include "key.h"
  18. /**
  19. * enum ieee80211_sta_info_flags - Stations flags
  20. *
  21. * These flags are used with &struct sta_info's @flags member, but
  22. * only indirectly with set_sta_flag() and friends.
  23. *
  24. * @WLAN_STA_AUTH: Station is authenticated.
  25. * @WLAN_STA_ASSOC: Station is associated.
  26. * @WLAN_STA_PS_STA: Station is in power-save mode
  27. * @WLAN_STA_AUTHORIZED: Station is authorized to send/receive traffic.
  28. * This bit is always checked so needs to be enabled for all stations
  29. * when virtual port control is not in use.
  30. * @WLAN_STA_SHORT_PREAMBLE: Station is capable of receiving short-preamble
  31. * frames.
  32. * @WLAN_STA_WDS: Station is one of our WDS peers.
  33. * @WLAN_STA_CLEAR_PS_FILT: Clear PS filter in hardware (using the
  34. * IEEE80211_TX_CTL_CLEAR_PS_FILT control flag) when the next
  35. * frame to this station is transmitted.
  36. * @WLAN_STA_MFP: Management frame protection is used with this STA.
  37. * @WLAN_STA_BLOCK_BA: Used to deny ADDBA requests (both TX and RX)
  38. * during suspend/resume and station removal.
  39. * @WLAN_STA_PS_DRIVER: driver requires keeping this station in
  40. * power-save mode logically to flush frames that might still
  41. * be in the queues
  42. * @WLAN_STA_PSPOLL: Station sent PS-poll while driver was keeping
  43. * station in power-save mode, reply when the driver unblocks.
  44. * @WLAN_STA_TDLS_PEER: Station is a TDLS peer.
  45. * @WLAN_STA_TDLS_PEER_AUTH: This TDLS peer is authorized to send direct
  46. * packets. This means the link is enabled.
  47. * @WLAN_STA_TDLS_INITIATOR: We are the initiator of the TDLS link with this
  48. * station.
  49. * @WLAN_STA_TDLS_CHAN_SWITCH: This TDLS peer supports TDLS channel-switching
  50. * @WLAN_STA_TDLS_OFF_CHANNEL: The local STA is currently off-channel with this
  51. * TDLS peer
  52. * @WLAN_STA_UAPSD: Station requested unscheduled SP while driver was
  53. * keeping station in power-save mode, reply when the driver
  54. * unblocks the station.
  55. * @WLAN_STA_SP: Station is in a service period, so don't try to
  56. * reply to other uAPSD trigger frames or PS-Poll.
  57. * @WLAN_STA_4ADDR_EVENT: 4-addr event was already sent for this frame.
  58. * @WLAN_STA_INSERTED: This station is inserted into the hash table.
  59. * @WLAN_STA_RATE_CONTROL: rate control was initialized for this station.
  60. * @WLAN_STA_TOFFSET_KNOWN: toffset calculated for this station is valid.
  61. * @WLAN_STA_MPSP_OWNER: local STA is owner of a mesh Peer Service Period.
  62. * @WLAN_STA_MPSP_RECIPIENT: local STA is recipient of a MPSP.
  63. * @WLAN_STA_PS_DELIVER: station woke up, but we're still blocking TX
  64. * until pending frames are delivered
  65. */
  66. enum ieee80211_sta_info_flags {
  67. WLAN_STA_AUTH,
  68. WLAN_STA_ASSOC,
  69. WLAN_STA_PS_STA,
  70. WLAN_STA_AUTHORIZED,
  71. WLAN_STA_SHORT_PREAMBLE,
  72. WLAN_STA_WDS,
  73. WLAN_STA_CLEAR_PS_FILT,
  74. WLAN_STA_MFP,
  75. WLAN_STA_BLOCK_BA,
  76. WLAN_STA_PS_DRIVER,
  77. WLAN_STA_PSPOLL,
  78. WLAN_STA_TDLS_PEER,
  79. WLAN_STA_TDLS_PEER_AUTH,
  80. WLAN_STA_TDLS_INITIATOR,
  81. WLAN_STA_TDLS_CHAN_SWITCH,
  82. WLAN_STA_TDLS_OFF_CHANNEL,
  83. WLAN_STA_UAPSD,
  84. WLAN_STA_SP,
  85. WLAN_STA_4ADDR_EVENT,
  86. WLAN_STA_INSERTED,
  87. WLAN_STA_RATE_CONTROL,
  88. WLAN_STA_TOFFSET_KNOWN,
  89. WLAN_STA_MPSP_OWNER,
  90. WLAN_STA_MPSP_RECIPIENT,
  91. WLAN_STA_PS_DELIVER,
  92. };
  93. #define ADDBA_RESP_INTERVAL HZ
  94. #define HT_AGG_MAX_RETRIES 15
  95. #define HT_AGG_BURST_RETRIES 3
  96. #define HT_AGG_RETRIES_PERIOD (15 * HZ)
  97. #define HT_AGG_STATE_DRV_READY 0
  98. #define HT_AGG_STATE_RESPONSE_RECEIVED 1
  99. #define HT_AGG_STATE_OPERATIONAL 2
  100. #define HT_AGG_STATE_STOPPING 3
  101. #define HT_AGG_STATE_WANT_START 4
  102. #define HT_AGG_STATE_WANT_STOP 5
  103. enum ieee80211_agg_stop_reason {
  104. AGG_STOP_DECLINED,
  105. AGG_STOP_LOCAL_REQUEST,
  106. AGG_STOP_PEER_REQUEST,
  107. AGG_STOP_DESTROY_STA,
  108. };
  109. /**
  110. * struct tid_ampdu_tx - TID aggregation information (Tx).
  111. *
  112. * @rcu_head: rcu head for freeing structure
  113. * @session_timer: check if we keep Tx-ing on the TID (by timeout value)
  114. * @addba_resp_timer: timer for peer's response to addba request
  115. * @pending: pending frames queue -- use sta's spinlock to protect
  116. * @dialog_token: dialog token for aggregation session
  117. * @timeout: session timeout value to be filled in ADDBA requests
  118. * @state: session state (see above)
  119. * @last_tx: jiffies of last tx activity
  120. * @stop_initiator: initiator of a session stop
  121. * @tx_stop: TX DelBA frame when stopping
  122. * @buf_size: reorder buffer size at receiver
  123. * @failed_bar_ssn: ssn of the last failed BAR tx attempt
  124. * @bar_pending: BAR needs to be re-sent
  125. *
  126. * This structure's lifetime is managed by RCU, assignments to
  127. * the array holding it must hold the aggregation mutex.
  128. *
  129. * The TX path can access it under RCU lock-free if, and
  130. * only if, the state has the flag %HT_AGG_STATE_OPERATIONAL
  131. * set. Otherwise, the TX path must also acquire the spinlock
  132. * and re-check the state, see comments in the tx code
  133. * touching it.
  134. */
  135. struct tid_ampdu_tx {
  136. struct rcu_head rcu_head;
  137. struct timer_list session_timer;
  138. struct timer_list addba_resp_timer;
  139. struct sk_buff_head pending;
  140. unsigned long state;
  141. unsigned long last_tx;
  142. u16 timeout;
  143. u8 dialog_token;
  144. u8 stop_initiator;
  145. bool tx_stop;
  146. u8 buf_size;
  147. u16 failed_bar_ssn;
  148. bool bar_pending;
  149. };
  150. /**
  151. * struct tid_ampdu_rx - TID aggregation information (Rx).
  152. *
  153. * @reorder_buf: buffer to reorder incoming aggregated MPDUs. An MPDU may be an
  154. * A-MSDU with individually reported subframes.
  155. * @reorder_time: jiffies when skb was added
  156. * @session_timer: check if peer keeps Tx-ing on the TID (by timeout value)
  157. * @reorder_timer: releases expired frames from the reorder buffer.
  158. * @last_rx: jiffies of last rx activity
  159. * @head_seq_num: head sequence number in reordering buffer.
  160. * @stored_mpdu_num: number of MPDUs in reordering buffer
  161. * @ssn: Starting Sequence Number expected to be aggregated.
  162. * @buf_size: buffer size for incoming A-MPDUs
  163. * @timeout: reset timer value (in TUs).
  164. * @dialog_token: dialog token for aggregation session
  165. * @rcu_head: RCU head used for freeing this struct
  166. * @reorder_lock: serializes access to reorder buffer, see below.
  167. * @auto_seq: used for offloaded BA sessions to automatically pick head_seq_and
  168. * and ssn.
  169. *
  170. * This structure's lifetime is managed by RCU, assignments to
  171. * the array holding it must hold the aggregation mutex.
  172. *
  173. * The @reorder_lock is used to protect the members of this
  174. * struct, except for @timeout, @buf_size and @dialog_token,
  175. * which are constant across the lifetime of the struct (the
  176. * dialog token being used only for debugging).
  177. */
  178. struct tid_ampdu_rx {
  179. struct rcu_head rcu_head;
  180. spinlock_t reorder_lock;
  181. struct sk_buff_head *reorder_buf;
  182. unsigned long *reorder_time;
  183. struct timer_list session_timer;
  184. struct timer_list reorder_timer;
  185. unsigned long last_rx;
  186. u16 head_seq_num;
  187. u16 stored_mpdu_num;
  188. u16 ssn;
  189. u16 buf_size;
  190. u16 timeout;
  191. u8 dialog_token;
  192. bool auto_seq;
  193. };
  194. /**
  195. * struct sta_ampdu_mlme - STA aggregation information.
  196. *
  197. * @tid_rx: aggregation info for Rx per TID -- RCU protected
  198. * @tid_tx: aggregation info for Tx per TID
  199. * @tid_start_tx: sessions where start was requested
  200. * @addba_req_num: number of times addBA request has been sent.
  201. * @last_addba_req_time: timestamp of the last addBA request.
  202. * @dialog_token_allocator: dialog token enumerator for each new session;
  203. * @work: work struct for starting/stopping aggregation
  204. * @tid_rx_timer_expired: bitmap indicating on which TIDs the
  205. * RX timer expired until the work for it runs
  206. * @tid_rx_stop_requested: bitmap indicating which BA sessions per TID the
  207. * driver requested to close until the work for it runs
  208. * @mtx: mutex to protect all TX data (except non-NULL assignments
  209. * to tid_tx[idx], which are protected by the sta spinlock)
  210. * tid_start_tx is also protected by sta->lock.
  211. */
  212. struct sta_ampdu_mlme {
  213. struct mutex mtx;
  214. /* rx */
  215. struct tid_ampdu_rx __rcu *tid_rx[IEEE80211_NUM_TIDS];
  216. unsigned long tid_rx_timer_expired[BITS_TO_LONGS(IEEE80211_NUM_TIDS)];
  217. unsigned long tid_rx_stop_requested[BITS_TO_LONGS(IEEE80211_NUM_TIDS)];
  218. /* tx */
  219. struct work_struct work;
  220. struct tid_ampdu_tx __rcu *tid_tx[IEEE80211_NUM_TIDS];
  221. struct tid_ampdu_tx *tid_start_tx[IEEE80211_NUM_TIDS];
  222. unsigned long last_addba_req_time[IEEE80211_NUM_TIDS];
  223. u8 addba_req_num[IEEE80211_NUM_TIDS];
  224. u8 dialog_token_allocator;
  225. };
  226. /*
  227. * struct ieee80211_tx_latency_stat - Tx latency statistics
  228. *
  229. * Measures TX latency and jitter for a station per TID.
  230. *
  231. * @max: worst case latency
  232. * @sum: sum of all latencies
  233. * @counter: amount of Tx frames sent from interface
  234. * @bins: each bin counts how many frames transmitted within a certain
  235. * latency range. when disabled it is NULL.
  236. * @bin_count: amount of bins.
  237. */
  238. struct ieee80211_tx_latency_stat {
  239. u32 max;
  240. u32 sum;
  241. u32 counter;
  242. u32 *bins;
  243. u32 bin_count;
  244. };
  245. /* Value to indicate no TID reservation */
  246. #define IEEE80211_TID_UNRESERVED 0xff
  247. /**
  248. * struct sta_info - STA information
  249. *
  250. * This structure collects information about a station that
  251. * mac80211 is communicating with.
  252. *
  253. * @list: global linked list entry
  254. * @free_list: list entry for keeping track of stations to free
  255. * @hnext: hash table linked list pointer
  256. * @local: pointer to the global information
  257. * @sdata: virtual interface this station belongs to
  258. * @ptk: peer keys negotiated with this station, if any
  259. * @ptk_idx: last installed peer key index
  260. * @gtk: group keys negotiated with this station, if any
  261. * @gtk_idx: last installed group key index
  262. * @rate_ctrl: rate control algorithm reference
  263. * @rate_ctrl_priv: rate control private per-STA pointer
  264. * @last_tx_rate: rate used for last transmit, to report to userspace as
  265. * "the" transmit rate
  266. * @last_rx_rate_idx: rx status rate index of the last data packet
  267. * @last_rx_rate_flag: rx status flag of the last data packet
  268. * @last_rx_rate_vht_flag: rx status vht flag of the last data packet
  269. * @last_rx_rate_vht_nss: rx status nss of last data packet
  270. * @lock: used for locking all fields that require locking, see comments
  271. * in the header file.
  272. * @drv_deliver_wk: used for delivering frames after driver PS unblocking
  273. * @listen_interval: listen interval of this station, when we're acting as AP
  274. * @_flags: STA flags, see &enum ieee80211_sta_info_flags, do not use directly
  275. * @ps_lock: used for powersave (when mac80211 is the AP) related locking
  276. * @ps_tx_buf: buffers (per AC) of frames to transmit to this station
  277. * when it leaves power saving state or polls
  278. * @tx_filtered: buffers (per AC) of frames we already tried to
  279. * transmit but were filtered by hardware due to STA having
  280. * entered power saving state, these are also delivered to
  281. * the station when it leaves powersave or polls for frames
  282. * @driver_buffered_tids: bitmap of TIDs the driver has data buffered on
  283. * @rx_packets: Number of MSDUs received from this STA
  284. * @rx_bytes: Number of bytes received from this STA
  285. * @last_rx: time (in jiffies) when last frame was received from this STA
  286. * @last_connected: time (in seconds) when a station got connected
  287. * @num_duplicates: number of duplicate frames received from this STA
  288. * @rx_fragments: number of received MPDUs
  289. * @rx_dropped: number of dropped MPDUs from this STA
  290. * @last_signal: signal of last received frame from this STA
  291. * @avg_signal: moving average of signal of received frames from this STA
  292. * @last_ack_signal: signal of last received Ack frame from this STA
  293. * @last_seq_ctrl: last received seq/frag number from this STA (per RX queue)
  294. * @tx_filtered_count: number of frames the hardware filtered for this STA
  295. * @tx_retry_failed: number of frames that failed retry
  296. * @tx_retry_count: total number of retries for frames to this STA
  297. * @fail_avg: moving percentage of failed MSDUs
  298. * @tx_packets: number of RX/TX MSDUs
  299. * @tx_bytes: number of bytes transmitted to this STA
  300. * @tx_fragments: number of transmitted MPDUs
  301. * @tid_seq: per-TID sequence numbers for sending to this STA
  302. * @ampdu_mlme: A-MPDU state machine state
  303. * @timer_to_tid: identity mapping to ID timers
  304. * @tx_lat: Tx latency statistics
  305. * @llid: Local link ID
  306. * @plid: Peer link ID
  307. * @reason: Cancel reason on PLINK_HOLDING state
  308. * @plink_retries: Retries in establishment
  309. * @plink_state: peer link state
  310. * @plink_timeout: timeout of peer link
  311. * @plink_timer: peer link watch timer
  312. * @t_offset: timing offset relative to this host
  313. * @t_offset_setpoint: reference timing offset of this sta to be used when
  314. * calculating clockdrift
  315. * @local_pm: local link-specific power save mode
  316. * @peer_pm: peer-specific power save mode towards local STA
  317. * @nonpeer_pm: STA power save mode towards non-peer neighbors
  318. * @debugfs: debug filesystem info
  319. * @dead: set to true when sta is unlinked
  320. * @uploaded: set to true when sta is uploaded to the driver
  321. * @lost_packets: number of consecutive lost packets
  322. * @sta: station information we share with the driver
  323. * @sta_state: duplicates information about station state (for debug)
  324. * @beacon_loss_count: number of times beacon loss has triggered
  325. * @rcu_head: RCU head used for freeing this station struct
  326. * @cur_max_bandwidth: maximum bandwidth to use for TX to the station,
  327. * taken from HT/VHT capabilities or VHT operating mode notification
  328. * @chains: chains ever used for RX from this station
  329. * @chain_signal_last: last signal (per chain)
  330. * @chain_signal_avg: signal average (per chain)
  331. * @known_smps_mode: the smps_mode the client thinks we are in. Relevant for
  332. * AP only.
  333. * @cipher_scheme: optional cipher scheme for this station
  334. * @last_tdls_pkt_time: holds the time in jiffies of last TDLS pkt ACKed
  335. * @reserved_tid: reserved TID (if any, otherwise IEEE80211_TID_UNRESERVED)
  336. */
  337. struct sta_info {
  338. /* General information, mostly static */
  339. struct list_head list, free_list;
  340. struct rcu_head rcu_head;
  341. struct sta_info __rcu *hnext;
  342. struct ieee80211_local *local;
  343. struct ieee80211_sub_if_data *sdata;
  344. struct ieee80211_key __rcu *gtk[NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS];
  345. struct ieee80211_key __rcu *ptk[NUM_DEFAULT_KEYS];
  346. u8 gtk_idx;
  347. u8 ptk_idx;
  348. struct rate_control_ref *rate_ctrl;
  349. void *rate_ctrl_priv;
  350. spinlock_t lock;
  351. struct work_struct drv_deliver_wk;
  352. u16 listen_interval;
  353. bool dead;
  354. bool uploaded;
  355. enum ieee80211_sta_state sta_state;
  356. /* use the accessors defined below */
  357. unsigned long _flags;
  358. /* STA powersave lock and frame queues */
  359. spinlock_t ps_lock;
  360. struct sk_buff_head ps_tx_buf[IEEE80211_NUM_ACS];
  361. struct sk_buff_head tx_filtered[IEEE80211_NUM_ACS];
  362. unsigned long driver_buffered_tids;
  363. /* Updated from RX path only, no locking requirements */
  364. unsigned long rx_packets;
  365. u64 rx_bytes;
  366. unsigned long last_rx;
  367. long last_connected;
  368. unsigned long num_duplicates;
  369. unsigned long rx_fragments;
  370. unsigned long rx_dropped;
  371. int last_signal;
  372. struct ewma avg_signal;
  373. int last_ack_signal;
  374. u8 chains;
  375. s8 chain_signal_last[IEEE80211_MAX_CHAINS];
  376. struct ewma chain_signal_avg[IEEE80211_MAX_CHAINS];
  377. /* Plus 1 for non-QoS frames */
  378. __le16 last_seq_ctrl[IEEE80211_NUM_TIDS + 1];
  379. /* Updated from TX status path only, no locking requirements */
  380. unsigned long tx_filtered_count;
  381. unsigned long tx_retry_failed, tx_retry_count;
  382. /* moving percentage of failed MSDUs */
  383. unsigned int fail_avg;
  384. /* Updated from TX path only, no locking requirements */
  385. u32 tx_fragments;
  386. u64 tx_packets[IEEE80211_NUM_ACS];
  387. u64 tx_bytes[IEEE80211_NUM_ACS];
  388. struct ieee80211_tx_rate last_tx_rate;
  389. int last_rx_rate_idx;
  390. u32 last_rx_rate_flag;
  391. u32 last_rx_rate_vht_flag;
  392. u8 last_rx_rate_vht_nss;
  393. u16 tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1];
  394. /*
  395. * Aggregation information, locked with lock.
  396. */
  397. struct sta_ampdu_mlme ampdu_mlme;
  398. u8 timer_to_tid[IEEE80211_NUM_TIDS];
  399. struct ieee80211_tx_latency_stat *tx_lat;
  400. #ifdef CONFIG_MAC80211_MESH
  401. /*
  402. * Mesh peer link attributes
  403. * TODO: move to a sub-structure that is referenced with pointer?
  404. */
  405. u16 llid;
  406. u16 plid;
  407. u16 reason;
  408. u8 plink_retries;
  409. enum nl80211_plink_state plink_state;
  410. u32 plink_timeout;
  411. struct timer_list plink_timer;
  412. s64 t_offset;
  413. s64 t_offset_setpoint;
  414. /* mesh power save */
  415. enum nl80211_mesh_power_mode local_pm;
  416. enum nl80211_mesh_power_mode peer_pm;
  417. enum nl80211_mesh_power_mode nonpeer_pm;
  418. #endif
  419. #ifdef CONFIG_MAC80211_DEBUGFS
  420. struct sta_info_debugfsdentries {
  421. struct dentry *dir;
  422. bool add_has_run;
  423. } debugfs;
  424. #endif
  425. enum ieee80211_sta_rx_bandwidth cur_max_bandwidth;
  426. unsigned int lost_packets;
  427. unsigned int beacon_loss_count;
  428. enum ieee80211_smps_mode known_smps_mode;
  429. const struct ieee80211_cipher_scheme *cipher_scheme;
  430. /* TDLS timeout data */
  431. unsigned long last_tdls_pkt_time;
  432. u8 reserved_tid;
  433. /* keep last! */
  434. struct ieee80211_sta sta;
  435. };
  436. static inline enum nl80211_plink_state sta_plink_state(struct sta_info *sta)
  437. {
  438. #ifdef CONFIG_MAC80211_MESH
  439. return sta->plink_state;
  440. #endif
  441. return NL80211_PLINK_LISTEN;
  442. }
  443. static inline void set_sta_flag(struct sta_info *sta,
  444. enum ieee80211_sta_info_flags flag)
  445. {
  446. WARN_ON(flag == WLAN_STA_AUTH ||
  447. flag == WLAN_STA_ASSOC ||
  448. flag == WLAN_STA_AUTHORIZED);
  449. set_bit(flag, &sta->_flags);
  450. }
  451. static inline void clear_sta_flag(struct sta_info *sta,
  452. enum ieee80211_sta_info_flags flag)
  453. {
  454. WARN_ON(flag == WLAN_STA_AUTH ||
  455. flag == WLAN_STA_ASSOC ||
  456. flag == WLAN_STA_AUTHORIZED);
  457. clear_bit(flag, &sta->_flags);
  458. }
  459. static inline int test_sta_flag(struct sta_info *sta,
  460. enum ieee80211_sta_info_flags flag)
  461. {
  462. return test_bit(flag, &sta->_flags);
  463. }
  464. static inline int test_and_clear_sta_flag(struct sta_info *sta,
  465. enum ieee80211_sta_info_flags flag)
  466. {
  467. WARN_ON(flag == WLAN_STA_AUTH ||
  468. flag == WLAN_STA_ASSOC ||
  469. flag == WLAN_STA_AUTHORIZED);
  470. return test_and_clear_bit(flag, &sta->_flags);
  471. }
  472. static inline int test_and_set_sta_flag(struct sta_info *sta,
  473. enum ieee80211_sta_info_flags flag)
  474. {
  475. WARN_ON(flag == WLAN_STA_AUTH ||
  476. flag == WLAN_STA_ASSOC ||
  477. flag == WLAN_STA_AUTHORIZED);
  478. return test_and_set_bit(flag, &sta->_flags);
  479. }
  480. int sta_info_move_state(struct sta_info *sta,
  481. enum ieee80211_sta_state new_state);
  482. static inline void sta_info_pre_move_state(struct sta_info *sta,
  483. enum ieee80211_sta_state new_state)
  484. {
  485. int ret;
  486. WARN_ON_ONCE(test_sta_flag(sta, WLAN_STA_INSERTED));
  487. ret = sta_info_move_state(sta, new_state);
  488. WARN_ON_ONCE(ret);
  489. }
  490. void ieee80211_assign_tid_tx(struct sta_info *sta, int tid,
  491. struct tid_ampdu_tx *tid_tx);
  492. static inline struct tid_ampdu_tx *
  493. rcu_dereference_protected_tid_tx(struct sta_info *sta, int tid)
  494. {
  495. return rcu_dereference_protected(sta->ampdu_mlme.tid_tx[tid],
  496. lockdep_is_held(&sta->lock) ||
  497. lockdep_is_held(&sta->ampdu_mlme.mtx));
  498. }
  499. #define STA_HASH_SIZE 256
  500. #define STA_HASH(sta) (sta[5])
  501. /* Maximum number of frames to buffer per power saving station per AC */
  502. #define STA_MAX_TX_BUFFER 64
  503. /* Minimum buffered frame expiry time. If STA uses listen interval that is
  504. * smaller than this value, the minimum value here is used instead. */
  505. #define STA_TX_BUFFER_EXPIRE (10 * HZ)
  506. /* How often station data is cleaned up (e.g., expiration of buffered frames)
  507. */
  508. #define STA_INFO_CLEANUP_INTERVAL (10 * HZ)
  509. /*
  510. * Get a STA info, must be under RCU read lock.
  511. */
  512. struct sta_info *sta_info_get(struct ieee80211_sub_if_data *sdata,
  513. const u8 *addr);
  514. struct sta_info *sta_info_get_bss(struct ieee80211_sub_if_data *sdata,
  515. const u8 *addr);
  516. static inline
  517. void for_each_sta_info_type_check(struct ieee80211_local *local,
  518. const u8 *addr,
  519. struct sta_info *sta,
  520. struct sta_info *nxt)
  521. {
  522. }
  523. #define for_each_sta_info(local, _addr, _sta, nxt) \
  524. for ( /* initialise loop */ \
  525. _sta = rcu_dereference(local->sta_hash[STA_HASH(_addr)]),\
  526. nxt = _sta ? rcu_dereference(_sta->hnext) : NULL; \
  527. /* typecheck */ \
  528. for_each_sta_info_type_check(local, (_addr), _sta, nxt),\
  529. /* continue condition */ \
  530. _sta; \
  531. /* advance loop */ \
  532. _sta = nxt, \
  533. nxt = _sta ? rcu_dereference(_sta->hnext) : NULL \
  534. ) \
  535. /* compare address and run code only if it matches */ \
  536. if (ether_addr_equal(_sta->sta.addr, (_addr)))
  537. /*
  538. * Get STA info by index, BROKEN!
  539. */
  540. struct sta_info *sta_info_get_by_idx(struct ieee80211_sub_if_data *sdata,
  541. int idx);
  542. /*
  543. * Create a new STA info, caller owns returned structure
  544. * until sta_info_insert().
  545. */
  546. struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
  547. const u8 *addr, gfp_t gfp);
  548. void sta_info_free(struct ieee80211_local *local, struct sta_info *sta);
  549. /*
  550. * Insert STA info into hash table/list, returns zero or a
  551. * -EEXIST if (if the same MAC address is already present).
  552. *
  553. * Calling the non-rcu version makes the caller relinquish,
  554. * the _rcu version calls read_lock_rcu() and must be called
  555. * without it held.
  556. */
  557. int sta_info_insert(struct sta_info *sta);
  558. int sta_info_insert_rcu(struct sta_info *sta) __acquires(RCU);
  559. int __must_check __sta_info_destroy(struct sta_info *sta);
  560. int sta_info_destroy_addr(struct ieee80211_sub_if_data *sdata,
  561. const u8 *addr);
  562. int sta_info_destroy_addr_bss(struct ieee80211_sub_if_data *sdata,
  563. const u8 *addr);
  564. void sta_info_recalc_tim(struct sta_info *sta);
  565. void sta_info_init(struct ieee80211_local *local);
  566. void sta_info_stop(struct ieee80211_local *local);
  567. /**
  568. * sta_info_flush - flush matching STA entries from the STA table
  569. *
  570. * Returns the number of removed STA entries.
  571. *
  572. * @sdata: sdata to remove all stations from
  573. * @vlans: if the given interface is an AP interface, also flush VLANs
  574. */
  575. int __sta_info_flush(struct ieee80211_sub_if_data *sdata, bool vlans);
  576. static inline int sta_info_flush(struct ieee80211_sub_if_data *sdata)
  577. {
  578. return __sta_info_flush(sdata, false);
  579. }
  580. void sta_set_rate_info_tx(struct sta_info *sta,
  581. const struct ieee80211_tx_rate *rate,
  582. struct rate_info *rinfo);
  583. void sta_set_rate_info_rx(struct sta_info *sta,
  584. struct rate_info *rinfo);
  585. void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo);
  586. void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata,
  587. unsigned long exp_time);
  588. u8 sta_info_tx_streams(struct sta_info *sta);
  589. void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta);
  590. void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta);
  591. void ieee80211_sta_ps_deliver_uapsd(struct sta_info *sta);
  592. #endif /* STA_INFO_H */