irq_cpu.c 4.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165
  1. /*
  2. * Copyright 2001 MontaVista Software Inc.
  3. * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
  4. *
  5. * Copyright (C) 2001 Ralf Baechle
  6. * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
  7. * Author: Maciej W. Rozycki <macro@mips.com>
  8. *
  9. * This file define the irq handler for MIPS CPU interrupts.
  10. *
  11. * This program is free software; you can redistribute it and/or modify it
  12. * under the terms of the GNU General Public License as published by the
  13. * Free Software Foundation; either version 2 of the License, or (at your
  14. * option) any later version.
  15. */
  16. /*
  17. * Almost all MIPS CPUs define 8 interrupt sources. They are typically
  18. * level triggered (i.e., cannot be cleared from CPU; must be cleared from
  19. * device). The first two are software interrupts which we don't really
  20. * use or support. The last one is usually the CPU timer interrupt if
  21. * counter register is present or, for CPUs with an external FPU, by
  22. * convention it's the FPU exception interrupt.
  23. *
  24. * Don't even think about using this on SMP. You have been warned.
  25. *
  26. * This file exports one global function:
  27. * void mips_cpu_irq_init(void);
  28. */
  29. #include <linux/init.h>
  30. #include <linux/interrupt.h>
  31. #include <linux/kernel.h>
  32. #include <linux/irq.h>
  33. #include <linux/irqdomain.h>
  34. #include <asm/irq_cpu.h>
  35. #include <asm/mipsregs.h>
  36. #include <asm/mipsmtregs.h>
  37. #include <asm/setup.h>
  38. static inline void unmask_mips_irq(struct irq_data *d)
  39. {
  40. set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
  41. irq_enable_hazard();
  42. }
  43. static inline void mask_mips_irq(struct irq_data *d)
  44. {
  45. clear_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
  46. irq_disable_hazard();
  47. }
  48. static struct irq_chip mips_cpu_irq_controller = {
  49. .name = "MIPS",
  50. .irq_ack = mask_mips_irq,
  51. .irq_mask = mask_mips_irq,
  52. .irq_mask_ack = mask_mips_irq,
  53. .irq_unmask = unmask_mips_irq,
  54. .irq_eoi = unmask_mips_irq,
  55. };
  56. /*
  57. * Basically the same as above but taking care of all the MT stuff
  58. */
  59. static unsigned int mips_mt_cpu_irq_startup(struct irq_data *d)
  60. {
  61. unsigned int vpflags = dvpe();
  62. clear_c0_cause(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
  63. evpe(vpflags);
  64. unmask_mips_irq(d);
  65. return 0;
  66. }
  67. /*
  68. * While we ack the interrupt interrupts are disabled and thus we don't need
  69. * to deal with concurrency issues. Same for mips_cpu_irq_end.
  70. */
  71. static void mips_mt_cpu_irq_ack(struct irq_data *d)
  72. {
  73. unsigned int vpflags = dvpe();
  74. clear_c0_cause(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
  75. evpe(vpflags);
  76. mask_mips_irq(d);
  77. }
  78. static struct irq_chip mips_mt_cpu_irq_controller = {
  79. .name = "MIPS",
  80. .irq_startup = mips_mt_cpu_irq_startup,
  81. .irq_ack = mips_mt_cpu_irq_ack,
  82. .irq_mask = mask_mips_irq,
  83. .irq_mask_ack = mips_mt_cpu_irq_ack,
  84. .irq_unmask = unmask_mips_irq,
  85. .irq_eoi = unmask_mips_irq,
  86. };
  87. asmlinkage void __weak plat_irq_dispatch(void)
  88. {
  89. unsigned long pending = read_c0_cause() & read_c0_status() & ST0_IM;
  90. int irq;
  91. if (!pending) {
  92. spurious_interrupt();
  93. return;
  94. }
  95. pending >>= CAUSEB_IP;
  96. while (pending) {
  97. irq = fls(pending) - 1;
  98. do_IRQ(MIPS_CPU_IRQ_BASE + irq);
  99. pending &= ~BIT(irq);
  100. }
  101. }
  102. static int mips_cpu_intc_map(struct irq_domain *d, unsigned int irq,
  103. irq_hw_number_t hw)
  104. {
  105. static struct irq_chip *chip;
  106. if (hw < 2 && cpu_has_mipsmt) {
  107. /* Software interrupts are used for MT/CMT IPI */
  108. chip = &mips_mt_cpu_irq_controller;
  109. } else {
  110. chip = &mips_cpu_irq_controller;
  111. }
  112. if (cpu_has_vint)
  113. set_vi_handler(hw, plat_irq_dispatch);
  114. irq_set_chip_and_handler(irq, chip, handle_percpu_irq);
  115. return 0;
  116. }
  117. static const struct irq_domain_ops mips_cpu_intc_irq_domain_ops = {
  118. .map = mips_cpu_intc_map,
  119. .xlate = irq_domain_xlate_onecell,
  120. };
  121. static void __init __mips_cpu_irq_init(struct device_node *of_node)
  122. {
  123. struct irq_domain *domain;
  124. /* Mask interrupts. */
  125. clear_c0_status(ST0_IM);
  126. clear_c0_cause(CAUSEF_IP);
  127. domain = irq_domain_add_legacy(of_node, 8, MIPS_CPU_IRQ_BASE, 0,
  128. &mips_cpu_intc_irq_domain_ops, NULL);
  129. if (!domain)
  130. panic("Failed to add irqdomain for MIPS CPU");
  131. }
  132. void __init mips_cpu_irq_init(void)
  133. {
  134. __mips_cpu_irq_init(NULL);
  135. }
  136. int __init mips_cpu_irq_of_init(struct device_node *of_node,
  137. struct device_node *parent)
  138. {
  139. __mips_cpu_irq_init(of_node);
  140. return 0;
  141. }