 Stanislaw Gruszka
|
2ceb813798
rt2x00: call entry directly in rt2x00_dump_frame
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
6715208d0a
rt2800: enable rt3290 unconditionally on pci probe
|
%!s(int64=8) %!d(string=hai) anos |
 Serge Vasilugin
|
98e71f44c5
rt2x00: add support for RT5350 WiSoC
|
%!s(int64=8) %!d(string=hai) anos |
 Daniel Golle
|
5c4412e072
rt2x00: rt2800lib: add support for RT3352 with 20MHz crystal
|
%!s(int64=8) %!d(string=hai) anos |
|
Daniel Golle
|
dab38e7d25
rt2x00: rt2800lib: support for for RT3352 with external PA
|
%!s(int64=8) %!d(string=hai) anos |
 Felix Fietkau
|
b8c2db58d5
rt2x00: rt2800lib: fix rf id for RT3352
|
%!s(int64=8) %!d(string=hai) anos |
|
Serge Vasilugin
|
e974f3acaf
rt2x00: rt2800lib: correctly set HT20/HT40 filter
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
feecb0cb46
rt2800: remove warning on bcn_num != rt2x00dev->intf_beaconing
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
66ecec02e8
rt2800: set max_psdu to 3 on usb devices
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
e4019e7f95
rt2800: tune TX_RTS_CFG config
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
01d97ef4b2
rt2800: change default retry settings
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
31369c323b
rt2800: replace msleep() with usleep_range() on channel switch
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
eb79a8fe94
rt2800: replace mdelay by usleep on vco calibration.
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
24d42ef3b1
rt2800: perform VCO recalibration for RF5592 chip
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
bc00770539
rt2800: warn if doing VCO recalibration for unknow RF chip
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
8845254112
rt2800: rename adjust_freq_offset function
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
8f03a7c6e7
rt2800: set MAX_PSDU len according to remote STAs capabilities
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
a51b89698c
rt2800: set minimum MPDU and PSDU lengths to sane values
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
a08b98196a
rt2800: make rx ampdu_factor depend on number of rx chains
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
159a55a64d
rt2800: disable CCK rates on HT
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
8d79b00782
rt2800: tune *_PROT_CFG parameters
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
6c40063d5a
rt2800: use RTS/CTS protection instead of CTS-to-self
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
231aeca1e1
rt2800: correct TX_SW_CFG1 for 5592
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
be82de9d64
rt2800: correct AUTO_RSP_CFG
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
b4c449b1b8
rt2800: do not overwrite WPDMA_GLO_CFG_WP_DMA_BURST_SIZE
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
770e4b730a
rt2800: OFDM rates are mandatory
|
%!s(int64=8) %!d(string=hai) anos |
|
Stanislaw Gruszka
|
cea5b03d8a
rt2800: correctly report MCS TX parameters
|
%!s(int64=8) %!d(string=hai) anos |
 Mathias Kresin
|
9766cb7090
rt2x00: add support for mac addr from device tree
|
%!s(int64=9) %!d(string=hai) anos |
 Chun-Yeow Yeoh
|
2557654df1
rt2800lib: enable MFP if hw crypt is disabled
|
%!s(int64=9) %!d(string=hai) anos |
 Johannes Berg
|
57fbcce37b
cfg80211: remove enum ieee80211_band
|
%!s(int64=9) %!d(string=hai) anos |
