 Johan Hovold
|
140ca9d347
net: ethernet: bcmgenet: fix fixed-link phydev leaks
|
8 years ago |
|
Johan Hovold
|
0da60541f8
net: bcmgenet: fix phydev reference leak
|
8 years ago |
 Florian Fainelli
|
bf1a85a838
Revert "net: ethernet: bcmgenet: use phydev from struct net_device"
|
9 years ago |
 Philippe Reynes
|
62469c7600
net: ethernet: bcmgenet: use phydev from struct net_device
|
9 years ago |
|
Florian Fainelli
|
49f7a471e4
net: bcmgenet: Properly configure PHY to ignore interrupt
|
9 years ago |
 Andrew Lunn
|
7f854420fb
phy: Add API for {un}registering an mdio device to a bus.
|
9 years ago |
|
Andrew Lunn
|
e5a03bfd87
phy: Add an mdio_device structure
|
9 years ago |
|
Andrew Lunn
|
e7f4dc3536
mdio: Move allocation of interrupts into core
|
9 years ago |
|
Florian Fainelli
|
5dbebbb44a
net: bcmgenet: Software reset EPHY after power on
|
9 years ago |
|
Andrew Lunn
|
a5597008db
phy: fixed_phy: Add gpio to determine link up/down.
|
10 years ago |
|
Florian Fainelli
|
6ac9de5f65
net: bcmgenet: Register link_update callback for all MoCA PHYs
|
10 years ago |
|
Florian Fainelli
|
28b45910cc
net: bcmgenet: Remove init parameter from bcmgenet_mii_config
|
10 years ago |
|
Florian Fainelli
|
6cc8e6d4dc
net: bcmgenet: Delay PHY initialization to bcmgenet_open()
|
10 years ago |
|
Florian Fainelli
|
c624f89121
net: bcmgenet: Determine PHY type before scanning MDIO bus
|
10 years ago |
|
Florian Fainelli
|
6ac3ce8295
net: bcmgenet: Remove excessive PHY reset
|
10 years ago |
|
Florian Fainelli
|
7b635da868
net: bcmgenet: workaround initial read failures for integrated PHYs
|
10 years ago |
|
Florian Fainelli
|
9d3366e95d
net: bcmgenet: handle broken turn-around for specific PHYs
|
10 years ago |
|
Florian Fainelli
|
afe3f907d2
net: bcmgenet: power on MII block for all MII modes
|
10 years ago |
 Petri Gynther
|
8d88c6ebb3
net: bcmgenet: enable MoCA link state change detection
|
10 years ago |
|
Florian Fainelli
|
a642c4f790
net: bcmgenet: power up and down integrated GPHY when unused
|
10 years ago |
|
Florian Fainelli
|
a9d608c153
net: bcmgenet: implement GPHY power down sequence
|
10 years ago |
|
Florian Fainelli
|
0c81a8ee61
net: bcmgenet: fix GPHY power-up sequence
|
10 years ago |
|
Florian Fainelli
|
8212c98358
net: bcmgenet: rename bcmgenet_ephy_power_up
|
10 years ago |
|
Florian Fainelli
|
0d017e2193
net: bcmgenet: update bcmgenet_ephy_power_up to clear CK25_DIS bit
|
10 years ago |
|
Petri Gynther
|
b0ba512e25
net: bcmgenet: enable driver to work without a device tree
|
10 years ago |
|
Florian Fainelli
|
dbd479db79
net: bcmgenet: apply MII configuration in bcmgenet_open()
|
10 years ago |
|
Florian Fainelli
|
c96e731c93
net: bcmgenet: connect and disconnect from the PHY state machine
|
10 years ago |
|
Petri Gynther
|
5ad6e6c508
net: bcmgenet: improve bcmgenet_mii_setup()
|
11 years ago |
|
Florian Fainelli
|
487320c541
net: bcmgenet: communicate integrated PHY revision to PHY driver
|
11 years ago |
|
Florian Fainelli
|
80780a54ec
net: bcmgenet: remove PHY_BRCM_100MBPS_WAR
|
11 years ago |
