 Seungwon Jeon
|
cdc991790c
mmc: drop the speed mode of card's state
|
%!s(int64=11) %!d(string=hai) anos |
 Ulf Hansson
|
573185cc7e
mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus
|
%!s(int64=11) %!d(string=hai) anos |
|
Ulf Hansson
|
726d6f2374
mmc: core: Collect common code for card ocr validation
|
%!s(int64=12) %!d(string=hai) anos |
|
Ulf Hansson
|
ce69d37b7d
mmc: core: Prevent violation of specs while initializing cards
|
%!s(int64=12) %!d(string=hai) anos |
|
Ulf Hansson
|
6904115095
mmc: core: Move cached value of the negotiated ocr mask to card struct
|
%!s(int64=12) %!d(string=hai) anos |
|
Ulf Hansson
|
db4a0d0512
mmc: core: Cleanup code for setting ocr mask for SDIO
|
%!s(int64=12) %!d(string=hai) anos |
|
Ulf Hansson
|
ec2ed70062
mmc: core: Remove unnecessary retry mechanism at SDIO attach
|
%!s(int64=12) %!d(string=hai) anos |
|
Ulf Hansson
|
0f791fdad8
mmc: core: Let mmc_set_signal_voltage take ocr as parameter
|
%!s(int64=12) %!d(string=hai) anos |
|
Ulf Hansson
|
4a065193c4
mmc: core: Let mmc_power_up|cycle take ocr as parameter
|
%!s(int64=12) %!d(string=hai) anos |
|
Ulf Hansson
|
7459026338
mmc: core: Push common suspend|resume code into each bus_ops
|
%!s(int64=12) %!d(string=hai) anos |
|
Ulf Hansson
|
810caddba4
mmc: core: Validate suspend prerequisites for SDIO at SUSPEND_PREPARE
|
%!s(int64=12) %!d(string=hai) anos |
|
Ulf Hansson
|
12d01d0b81
mmc: core: Add bus_ops for runtime pm callbacks
|
%!s(int64=12) %!d(string=hai) anos |
 Fredrik Soderstedt
|
810e08ee42
mmc: core: Only execute tuning for SDR50 and SDR104
|
%!s(int64=12) %!d(string=hai) anos |
 Li Fei
|
3bffb800b9
mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case
|
%!s(int64=12) %!d(string=hai) anos |
 Johan Rudholm
|
0797e5f145
mmc: core: Fixup signal voltage switch
|
%!s(int64=12) %!d(string=hai) anos |
|
Johan Rudholm
|
567c89032c
mmc: core: Break out start_signal_voltage_switch
|
%!s(int64=12) %!d(string=hai) anos |
 Subhash Jadavani
|
77e2ff0892
mmc: sdio: print correct UHS mode during card detection
|
%!s(int64=12) %!d(string=hai) anos |
 Sujit Reddy Thumma
|
41875e3884
mmc: sdio: Fix SDIO 3.0 UHS-I initialization sequence
|
%!s(int64=12) %!d(string=hai) anos |
|
Subhash Jadavani
|
51aa66a584
mmc: sdio: fix resume failure due to lack of CMD52 reset
|
%!s(int64=12) %!d(string=hai) anos |
 Masanari Iida
|
7122bbb0d1
mmc: fix comment typos
|
%!s(int64=13) %!d(string=hai) anos |
 Aaron Lu
|
108ecc4cf9
mmc: core: reset signal voltage on power up
|
%!s(int64=13) %!d(string=hai) anos |
 Yong Ding
|
2a0fe914a3
mmc: sdio: fix setting card data bus width as 4-bit
|
%!s(int64=13) %!d(string=hai) anos |
 Nicolas Pitre
|
bbbc4c4d8c
mmc: sdio: avoid spurious calls to interrupt handlers
|
%!s(int64=13) %!d(string=hai) anos |
 Ulf Hansson
|
e7747475b6
mmc: core: Fixup suspend/resume issues for UHS-I cards
|
%!s(int64=13) %!d(string=hai) anos |
 Philip Rakity
|
2d0d68f583
mmc: core: UHS sdio card that fails should not exceed 50MHz
|
%!s(int64=13) %!d(string=hai) anos |
 Girish K S
|
a4924c71aa
mmc: core: HS200 mode support for eMMC 4.5
|
%!s(int64=13) %!d(string=hai) anos |
 Adrian Hunter
|
d304950488
mmc: allow upper layers to know immediately if card has been removed
|
%!s(int64=13) %!d(string=hai) anos |
|
Philip Rakity
|
a303c5319c
mmc: sdio: support SDIO UHS cards
|
%!s(int64=13) %!d(string=hai) anos |
 Bing Zhao
|
b4625dab2c
mmc: recognise SDIO cards with SDIO_CCCR_REV 3.00
|
%!s(int64=14) %!d(string=hai) anos |
|
Girish K S
|
a3c76eb9d4
mmc: replace printk with appropriate display macro
|
%!s(int64=14) %!d(string=hai) anos |
