i40e: Add macro for PF reset bit

Introduce a macro for the bit setting the PF reset flag and
update its usages. This makes it easier to use this flag
in functions to be introduced in future without encountering
checkpatch issues related to alignment and line over 80
characters.

Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/i40e/i40e.h

@@ -157,6 +157,8 @@ enum i40e_state_t {
 	__I40E_STATE_SIZE__,
 };
 
+#define I40E_PF_RESET_FLAG	BIT_ULL(__I40E_PF_RESET_REQUESTED)
+
 /* VSI state flags */
 enum i40e_vsi_state_t {
 	__I40E_VSI_DOWN,

drivers/net/ethernet/intel/i40e/i40e_debugfs.c

@@ -798,8 +798,7 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 		 */
 		if (!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) {
 			pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
-			i40e_do_reset_safe(pf,
-					   BIT_ULL(__I40E_PF_RESET_REQUESTED));
+			i40e_do_reset_safe(pf, I40E_PF_RESET_FLAG);
 		}
 
 		vsi = i40e_vsi_setup(pf, I40E_VSI_VMDQ2, vsi_seid, 0);

drivers/net/ethernet/intel/i40e/i40e_main.c

@@ -5747,7 +5747,7 @@ err_setup_rx:
 err_setup_tx:
 	i40e_vsi_free_tx_resources(vsi);
 	if (vsi == pf->vsi[pf->lan_vsi])
-		i40e_do_reset(pf, BIT_ULL(__I40E_PF_RESET_REQUESTED), true);
+		i40e_do_reset(pf, I40E_PF_RESET_FLAG, true);
 
 	return err;
 }
@@ -5875,7 +5875,7 @@ void i40e_do_reset(struct i40e_pf *pf, u32 reset_flags, bool lock_acquired)
 		wr32(&pf->hw, I40E_GLGEN_RTRIG, val);
 		i40e_flush(&pf->hw);
 
-	} else if (reset_flags & BIT_ULL(__I40E_PF_RESET_REQUESTED)) {
+	} else if (reset_flags & I40E_PF_RESET_FLAG) {
 
 		/* Request a PF Reset
 		 *
@@ -9223,7 +9223,7 @@ static int i40e_set_features(struct net_device *netdev,
 	need_reset = i40e_set_ntuple(pf, features);
 
 	if (need_reset)
-		i40e_do_reset(pf, BIT_ULL(__I40E_PF_RESET_REQUESTED), true);
+		i40e_do_reset(pf, I40E_PF_RESET_FLAG, true);
 
 	return 0;
 }
@@ -9475,8 +9475,7 @@ static int i40e_ndo_bridge_setlink(struct net_device *dev,
 				pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
 			else
 				pf->flags &= ~I40E_FLAG_VEB_MODE_ENABLED;
-			i40e_do_reset(pf, BIT_ULL(__I40E_PF_RESET_REQUESTED),
-				      true);
+			i40e_do_reset(pf, I40E_PF_RESET_FLAG, true);
 			break;
 		}
 	}

drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c

@@ -1425,8 +1425,7 @@ int i40e_pci_sriov_configure(struct pci_dev *pdev, int num_vfs)
 	if (num_vfs) {
 		if (!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) {
 			pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
-			i40e_do_reset_safe(pf,
-					   BIT_ULL(__I40E_PF_RESET_REQUESTED));
+			i40e_do_reset_safe(pf, I40E_PF_RESET_FLAG);
 		}
 		return i40e_pci_sriov_enable(pdev, num_vfs);
 	}
@@ -1434,7 +1433,7 @@ int i40e_pci_sriov_configure(struct pci_dev *pdev, int num_vfs)
 	if (!pci_vfs_assigned(pf->pdev)) {
 		i40e_free_vfs(pf);
 		pf->flags &= ~I40E_FLAG_VEB_MODE_ENABLED;
-		i40e_do_reset_safe(pf, BIT_ULL(__I40E_PF_RESET_REQUESTED));
+		i40e_do_reset_safe(pf, I40E_PF_RESET_FLAG);
 	} else {
 		dev_warn(&pdev->dev, "Unable to free VFs because some are assigned to VMs.\n");
 		return -EINVAL;