Browse Source

dma: dw: add PCI part of the driver

This is the PCI part of the DesignWare DMAC driver. The controller is usually
used in the Intel hardware such as Intel Medfield.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Andy Shevchenko 12 năm trước cách đây
mục cha
commit
fed42c198b

+ 9 - 0
drivers/dma/dw/Kconfig

@@ -15,6 +15,15 @@ config DW_DMAC
 	  Support the Synopsys DesignWare AHB DMA controller. This
 	  Support the Synopsys DesignWare AHB DMA controller. This
 	  can be integrated in chips such as the Atmel AT32ap7000.
 	  can be integrated in chips such as the Atmel AT32ap7000.
 
 
+config DW_DMAC_PCI
+	tristate "Synopsys DesignWare AHB DMA PCI driver"
+	depends on PCI
+	select DW_DMAC_CORE
+	help
+	  Support the Synopsys DesignWare AHB DMA controller on the
+	  platfroms that enumerate it as a PCI device. For example,
+	  Intel Medfield has integrated this GPDMA controller.
+
 config DW_DMAC_BIG_ENDIAN_IO
 config DW_DMAC_BIG_ENDIAN_IO
 	bool "Use big endian I/O register access"
 	bool "Use big endian I/O register access"
 	default y if AVR32
 	default y if AVR32

+ 3 - 0
drivers/dma/dw/Makefile

@@ -3,3 +3,6 @@ dw_dmac_core-objs	:= core.o
 
 
 obj-$(CONFIG_DW_DMAC)		+= dw_dmac.o
 obj-$(CONFIG_DW_DMAC)		+= dw_dmac.o
 dw_dmac-objs		:= platform.o
 dw_dmac-objs		:= platform.o
+
+obj-$(CONFIG_DW_DMAC_PCI)	+= dw_dmac_pci.o
+dw_dmac_pci-objs	:= pci.o

+ 101 - 0
drivers/dma/dw/pci.c

@@ -0,0 +1,101 @@
+/*
+ * PCI driver for the Synopsys DesignWare DMA Controller
+ *
+ * Copyright (C) 2013 Intel Corporation
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/device.h>
+
+#include "internal.h"
+
+static struct dw_dma_platform_data dw_pci_pdata = {
+	.is_private = 1,
+	.chan_allocation_order = CHAN_ALLOCATION_ASCENDING,
+	.chan_priority = CHAN_PRIORITY_ASCENDING,
+};
+
+static int dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+	struct dw_dma_chip *chip;
+	struct dw_dma_platform_data *pdata = (void *)pid->driver_data;
+	int ret;
+
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	ret = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
+	if (ret) {
+		dev_err(&pdev->dev, "I/O memory remapping failed\n");
+		return ret;
+	}
+
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+
+	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = &pdev->dev;
+	chip->regs = pcim_iomap_table(pdev)[0];
+	chip->irq = pdev->irq;
+
+	ret = dw_dma_probe(chip, pdata);
+	if (ret)
+		return ret;
+
+	pci_set_drvdata(pdev, chip);
+
+	return 0;
+}
+
+static void dw_pci_remove(struct pci_dev *pdev)
+{
+	struct dw_dma_chip *chip = pci_get_drvdata(pdev);
+	int ret;
+
+	ret = dw_dma_remove(chip);
+	if (ret)
+		dev_warn(&pdev->dev, "can't remove device properly: %d\n", ret);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(dw_pci_id_table) = {
+	/* Medfield */
+	{ PCI_VDEVICE(INTEL, 0x0827), (kernel_ulong_t)&dw_pci_pdata },
+	{ PCI_VDEVICE(INTEL, 0x0830), (kernel_ulong_t)&dw_pci_pdata },
+
+	/* BayTrail */
+	{ PCI_VDEVICE(INTEL, 0x0f06), (kernel_ulong_t)&dw_pci_pdata },
+	{ PCI_VDEVICE(INTEL, 0x0f40), (kernel_ulong_t)&dw_pci_pdata },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, dw_pci_id_table);
+
+static struct pci_driver dw_pci_driver = {
+	.name		= "dw_dmac_pci",
+	.id_table	= dw_pci_id_table,
+	.probe		= dw_pci_probe,
+	.remove		= dw_pci_remove,
+};
+
+module_pci_driver(dw_pci_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller PCI driver");
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");