[media] adv7842: set LLC DLL phase from platform_data

The correct LLC DLL phase depends on the board layout, so this
should be part of the platform_data.

Also updated the platform_data in ezkit to ensure that what was the old
default value is now explicitly specified, so the behavior for that board
is unchanged.

Tested-by: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

arch/blackfin/mach-bf609/boards/ezkit.c

@@ -1027,6 +1027,7 @@ static struct adv7842_platform_data adv7842_data = {
 	.vid_std_select = ADV7842_SDP_VID_STD_CVBS_SD_4x1,
 	.hdmi_free_run_enable = 1,
 	.sdp_free_run_auto = 1,
+	.llc_dll_phase = 0x10,
 	.i2c_sdp_io = 0x40,
 	.i2c_sdp = 0x41,
 	.i2c_cp = 0x42,

drivers/media/i2c/adv7842.c

@@ -1593,9 +1593,6 @@ static void select_input(struct v4l2_subdev *sd,
 		afe_write(sd, 0x00, 0x00); /* power up ADC */
 		afe_write(sd, 0xc8, 0x00); /* phase control */
 
-		io_write(sd, 0x19, 0x83); /* LLC DLL phase */
-		io_write(sd, 0x33, 0x40); /* LLC DLL enable */
-
 		io_write(sd, 0xdd, 0x90); /* Manual 2x output clock */
 		/* script says register 0xde, which don't exist in manual */
 
@@ -2609,8 +2606,7 @@ static int adv7842_core_init(struct v4l2_subdev *sd)
 	io_write_and_or(sd, 0x20, 0xcf, 0x00);
 
 	/* LLC */
-	/* Set phase to 16. TODO: get this from platform_data */
-	io_write(sd, 0x19, 0x90);
+	io_write(sd, 0x19, 0x80 | pdata->llc_dll_phase);
 	io_write(sd, 0x33, 0x40);
 
 	/* interrupts */

include/media/adv7842.h

@@ -192,6 +192,12 @@ struct adv7842_platform_data {
 		unsigned sync:2;
 	} drive_strength;
 
+	/*
+	 * IO register 0x19: Adjustment to the LLC DLL phase in
+	 * increments of 1/32 of a clock period.
+	 */
+	unsigned llc_dll_phase:5;
+
 	/* External RAM for 3-D comb or frame synchronizer */
 	unsigned sd_ram_size; /* ram size in MB */
 	unsigned sd_ram_ddr:1; /* ddr or sdr sdram */