Merge branch 'tegra/cleanups' into next/cleanup2

arch/arm/boot/dts/tegra-paz00.dts

@@ -46,11 +46,11 @@
 	};
 
 	serial@70006200 {
-		status = "disable";
+		clock-frequency = <216000000>;
 	};
 
 	serial@70006300 {
-		clock-frequency = <216000000>;
+		status = "disable";
 	};
 
 	serial@70006400 {
@@ -60,7 +60,7 @@
 	sdhci@c8000000 {
 		cd-gpios = <&gpio 173 0>; /* gpio PV5 */
 		wp-gpios = <&gpio 57 0>;  /* gpio PH1 */
-		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+		power-gpios = <&gpio 169 0>; /* gpio PV1 */
 	};
 
 	sdhci@c8000200 {

arch/arm/mach-tegra/Kconfig

@@ -8,8 +8,16 @@ config ARCH_TEGRA_2x_SOC
 	select ARM_GIC
 	select ARCH_REQUIRE_GPIOLIB
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select USB_ULPI if USB_SUPPORT
+	select USB_ULPI if USB
 	select USB_ULPI_VIEWPORT if USB_SUPPORT
+	select ARM_ERRATA_720789
+	select ARM_ERRATA_742230
+	select ARM_ERRATA_751472
+	select ARM_ERRATA_754327
+	select ARM_ERRATA_764369
+	select PL310_ERRATA_727915 if CACHE_L2X0
+	select PL310_ERRATA_769419 if CACHE_L2X0
+	select CPU_FREQ_TABLE if CPU_FREQ
 	help
 	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
@@ -20,9 +28,15 @@ config ARCH_TEGRA_3x_SOC
 	select ARM_GIC
 	select ARCH_REQUIRE_GPIOLIB
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select USB_ULPI if USB_SUPPORT
+	select USB_ULPI if USB
 	select USB_ULPI_VIEWPORT if USB_SUPPORT
 	select USE_OF
+	select ARM_ERRATA_743622
+	select ARM_ERRATA_751472
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_764369
+	select PL310_ERRATA_769419 if CACHE_L2X0
+	select CPU_FREQ_TABLE if CPU_FREQ
 	help
 	  Support for NVIDIA Tegra T30 processor family, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller

arch/arm/mach-tegra/Makefile

@@ -13,7 +13,8 @@ obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= tegra2_emc.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= pinmux-tegra20-tables.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= pinmux-tegra30-tables.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= board-dt-tegra30.o
-obj-$(CONFIG_SMP)                       += platsmp.o localtimer.o headsmp.o
+obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
 obj-$(CONFIG_TEGRA_SYSTEM_DMA)		+= dma.o
 obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o

arch/arm/mach-tegra/board-harmony-pinmux.c

@@ -53,7 +53,7 @@ static struct tegra_pingroup_config harmony_pinmux[] = {
 	{TEGRA_PINGROUP_GME,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_GPU,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_GPU7,  TEGRA_MUX_RTCK,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPV,   TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_GPV,   TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_HDINT, TEGRA_MUX_HDMI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_I2CP,  TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_IRRX,  TEGRA_MUX_UARTA,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
@@ -112,10 +112,10 @@ static struct tegra_pingroup_config harmony_pinmux[] = {
 	{TEGRA_PINGROUP_SDC,   TEGRA_MUX_PWM,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_SDD,   TEGRA_MUX_PWM,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXA,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SLXA,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_SLXC,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_SLXD,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXK,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SLXK,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_SPDI,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_SPDO,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_SPIA,  TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},

arch/arm/mach-tegra/board-paz00.c

@@ -60,9 +60,9 @@ static struct plat_serial8250_port debug_uart_platform_data[] = {
 		.uartclk	= 216000000,
 	}, {
 		/* serial port on mini-pcie */
-		.membase	= IO_ADDRESS(TEGRA_UARTD_BASE),
-		.mapbase	= TEGRA_UARTD_BASE,
-		.irq		= INT_UARTD,
+		.membase	= IO_ADDRESS(TEGRA_UARTC_BASE),
+		.mapbase	= TEGRA_UARTC_BASE,
+		.irq		= INT_UARTC,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
 		.type		= PORT_TEGRA,
 		.iotype		= UPIO_MEM,
@@ -174,7 +174,7 @@ static void __init tegra_paz00_fixup(struct tag *tags, char **cmdline,
 static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
 	/* name		parent		rate		enabled */
 	{ "uarta",	"pll_p",	216000000,	true },
-	{ "uartd",	"pll_p",	216000000,	true },
+	{ "uartc",	"pll_p",	216000000,	true },
 
 	{ "pll_p_out4",	"pll_p",	24000000,	true },
 	{ "usbd",	"clk_m",	12000000,	false },

arch/arm/mach-tegra/board-paz00.h

@@ -22,7 +22,7 @@
 /* SDCARD */
 #define TEGRA_GPIO_SD1_CD		TEGRA_GPIO_PV5
 #define TEGRA_GPIO_SD1_WP		TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD1_POWER		TEGRA_GPIO_PT3
+#define TEGRA_GPIO_SD1_POWER		TEGRA_GPIO_PV1
 
 /* ULPI */
 #define TEGRA_ULPI_RST			TEGRA_GPIO_PV0

arch/arm/mach-tegra/common.c

@@ -95,8 +95,6 @@ static void __init tegra_init_cache(u32 tag_latency, u32 data_latency)
 #ifdef CONFIG_ARCH_TEGRA_2x_SOC
 void __init tegra20_init_early(void)
 {
-	disable_hlt();  /* idle WFI usage needs to be confirmed */
-
 	tegra_init_fuse();
 	tegra2_init_clocks();
 	tegra_clk_init_from_table(tegra20_clk_init_table);

arch/arm/mach-tegra/pcie.c

@@ -585,10 +585,10 @@ static void tegra_pcie_setup_translations(void)
 	afi_writel(0, AFI_MSI_BAR_SZ);
 }
 
-static void tegra_pcie_enable_controller(void)
+static int tegra_pcie_enable_controller(void)
 {
 	u32 val, reg;
-	int i;
+	int i, timeout;
 
 	/* Enable slot clock and pulse the reset signals */
 	for (i = 0, reg = AFI_PEX0_CTRL; i < 2; i++, reg += 0x8) {
@@ -639,8 +639,14 @@ static void tegra_pcie_enable_controller(void)
 	pads_writel(0xfa5cfa5c, 0xc8);
 
 	/* Wait for the PLL to lock */
+	timeout = 300;
 	do {
 		val = pads_readl(PADS_PLL_CTL);
+		usleep_range(1000, 1000);
+		if (--timeout == 0) {
+			pr_err("Tegra PCIe error: timeout waiting for PLL\n");
+			return -EBUSY;
+		}
 	} while (!(val & PADS_PLL_CTL_LOCKDET));
 
 	/* turn off IDDQ override */
@@ -671,7 +677,7 @@ static void tegra_pcie_enable_controller(void)
 	/* Disable all execptions */
 	afi_writel(0, AFI_FPCI_ERROR_MASKS);
 
-	return;
+	return 0;
 }
 
 static void tegra_pcie_xclk_clamp(bool clamp)
@@ -921,7 +927,9 @@ int __init tegra_pcie_init(bool init_port0, bool init_port1)
 	if (err)
 		return err;
 
-	tegra_pcie_enable_controller();
+	err = tegra_pcie_enable_controller();
+	if (err)
+		return err;
 
 	/* setup the AFI address translations */
 	tegra_pcie_setup_translations();

arch/arm/mach-tegra/usb_phy.c

@@ -22,6 +22,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
@@ -730,6 +731,7 @@ err0:
 	kfree(phy);
 	return ERR_PTR(err);
 }
+EXPORT_SYMBOL_GPL(tegra_usb_phy_open);
 
 int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
 {
@@ -738,6 +740,7 @@ int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
 	else
 		return utmi_phy_power_on(phy);
 }
+EXPORT_SYMBOL_GPL(tegra_usb_phy_power_on);
 
 void tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
 {
@@ -746,18 +749,21 @@ void tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
 	else
 		utmi_phy_power_off(phy);
 }
+EXPORT_SYMBOL_GPL(tegra_usb_phy_power_off);
 
 void tegra_usb_phy_preresume(struct tegra_usb_phy *phy)
 {
 	if (!phy_is_ulpi(phy))
 		utmi_phy_preresume(phy);
 }
+EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume);
 
 void tegra_usb_phy_postresume(struct tegra_usb_phy *phy)
 {
 	if (!phy_is_ulpi(phy))
 		utmi_phy_postresume(phy);
 }
+EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume);
 
 void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
 				 enum tegra_usb_phy_port_speed port_speed)
@@ -765,24 +771,28 @@ void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
 	if (!phy_is_ulpi(phy))
 		utmi_phy_restore_start(phy, port_speed);
 }
+EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start);
 
 void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy)
 {
 	if (!phy_is_ulpi(phy))
 		utmi_phy_restore_end(phy);
 }
+EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end);
 
 void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy)
 {
 	if (!phy_is_ulpi(phy))
 		utmi_phy_clk_disable(phy);
 }
+EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_disable);
 
 void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy)
 {
 	if (!phy_is_ulpi(phy))
 		utmi_phy_clk_enable(phy);
 }
+EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_enable);
 
 void tegra_usb_phy_close(struct tegra_usb_phy *phy)
 {
@@ -794,3 +804,4 @@ void tegra_usb_phy_close(struct tegra_usb_phy *phy)
 	clk_put(phy->pll_u);
 	kfree(phy);
 }
+EXPORT_SYMBOL_GPL(tegra_usb_phy_close);