ath10k: fix tx/rx chainmask init

Firmware reports the number of RF chains so use
that for initialization of supp_{tx,rx}_chainmask
instead of using a macro for 3x3 chips.

This should make tx/rx chainmask reports correct
for chips other than 3x3.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/mac.c

@@ -4848,15 +4848,6 @@ int ath10k_mac_register(struct ath10k *ar)
 		BIT(NL80211_IFTYPE_STATION) |
 		BIT(NL80211_IFTYPE_AP);
 
-	if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) {
-		/* TODO:  Have to deal with 2x2 chips if/when the come out. */
-		ar->supp_tx_chainmask = TARGET_10X_TX_CHAIN_MASK;
-		ar->supp_rx_chainmask = TARGET_10X_RX_CHAIN_MASK;
-	} else {
-		ar->supp_tx_chainmask = TARGET_TX_CHAIN_MASK;
-		ar->supp_rx_chainmask = TARGET_RX_CHAIN_MASK;
-	}
-
 	ar->hw->wiphy->available_antennas_rx = ar->supp_rx_chainmask;
 	ar->hw->wiphy->available_antennas_tx = ar->supp_tx_chainmask;
 

drivers/net/wireless/ath/ath10k/wmi.c

@@ -2206,6 +2206,9 @@ static void ath10k_wmi_service_ready_event_rx(struct ath10k *ar,
 		ar->num_rf_chains = WMI_MAX_SPATIAL_STREAM;
 	}
 
+	ar->supp_tx_chainmask = (1 << ar->num_rf_chains) - 1;
+	ar->supp_rx_chainmask = (1 << ar->num_rf_chains) - 1;
+
 	ar->ath_common.regulatory.current_rd =
 		__le32_to_cpu(ev->hal_reg_capabilities.eeprom_rd);
 
@@ -2276,6 +2279,9 @@ static void ath10k_wmi_10x_service_ready_event_rx(struct ath10k *ar,
 		ar->num_rf_chains = WMI_MAX_SPATIAL_STREAM;
 	}
 
+	ar->supp_tx_chainmask = (1 << ar->num_rf_chains) - 1;
+	ar->supp_rx_chainmask = (1 << ar->num_rf_chains) - 1;
+
 	ar->ath_common.regulatory.current_rd =
 		__le32_to_cpu(ev->hal_reg_capabilities.eeprom_rd);