Merge branch 'akpm' (patches from Andrew)

Merge more updates from Andrew Morton:

 - most of the rest of MM

 - a small number of misc things

 - lib/ updates

 - checkpatch

 - autofs updates

 - ipc/ updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (126 commits)
  ipc: optimize semget/shmget/msgget for lots of keys
  ipc/sem: play nicer with large nsops allocations
  ipc/sem: drop sem_checkid helper
  ipc: convert kern_ipc_perm.refcount from atomic_t to refcount_t
  ipc: convert sem_undo_list.refcnt from atomic_t to refcount_t
  ipc: convert ipc_namespace.count from atomic_t to refcount_t
  kcov: support compat processes
  sh: defconfig: cleanup from old Kconfig options
  mn10300: defconfig: cleanup from old Kconfig options
  m32r: defconfig: cleanup from old Kconfig options
  drivers/pps: use surrounding "if PPS" to remove numerous dependency checks
  drivers/pps: aesthetic tweaks to PPS-related content
  cpumask: make cpumask_next() out-of-line
  kmod: move #ifdef CONFIG_MODULES wrapper to Makefile
  kmod: split off umh headers into its own file
  MAINTAINERS: clarify kmod is just a kernel module loader
  kmod: split out umh code into its own file
  test_kmod: flip INT checks to be consistent
  test_kmod: remove paranoid UINT_MAX check on uint range processing
  vfat: deduplicate hex2bin()
  ...

Documentation/devicetree/bindings/pps/pps-gpio.txt

@@ -13,8 +13,12 @@ Optional properties:
 
 Example:
 	pps {
-		compatible = "pps-gpio";
-		gpios = <&gpio2 6 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
 
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 		assert-falling-edge;
+
+		compatible = "pps-gpio";
+		status = "okay";
 	};

Documentation/pps/pps.txt

@@ -48,12 +48,12 @@ problem:
    time_pps_create().
 
 This implies that the source has a /dev/... entry. This assumption is
-ok for the serial and parallel port, where you can do something
+OK for the serial and parallel port, where you can do something
 useful besides(!) the gathering of timestamps as it is the central
-task for a PPS-API. But this assumption does not work for a single
+task for a PPS API. But this assumption does not work for a single
 purpose GPIO line. In this case even basic file-related functionality
 (like read() and write()) makes no sense at all and should not be a
-precondition for the use of a PPS-API.
+precondition for the use of a PPS API.
 
 The problem can be simply solved if you consider that a PPS source is
 not always connected with a GPS data source.
@@ -88,13 +88,13 @@ Coding example
 --------------
 
 To register a PPS source into the kernel you should define a struct
-pps_source_info_s as follows:
+pps_source_info as follows:
 
     static struct pps_source_info pps_ktimer_info = {
 	    .name         = "ktimer",
 	    .path         = "",
-	    .mode         = PPS_CAPTUREASSERT | PPS_OFFSETASSERT | \
-			    PPS_ECHOASSERT | \
+	    .mode         = PPS_CAPTUREASSERT | PPS_OFFSETASSERT |
+			    PPS_ECHOASSERT |
 			    PPS_CANWAIT | PPS_TSFMT_TSPEC,
 	    .echo         = pps_ktimer_echo,
 	    .owner        = THIS_MODULE,
@@ -108,13 +108,13 @@ initialization routine as follows:
 
 The pps_register_source() prototype is:
 
-  int pps_register_source(struct pps_source_info_s *info, int default_params)
+  int pps_register_source(struct pps_source_info *info, int default_params)
 
 where "info" is a pointer to a structure that describes a particular
 PPS source, "default_params" tells the system what the initial default
 parameters for the device should be (it is obvious that these parameters
 must be a subset of ones defined in the struct
-pps_source_info_s which describe the capabilities of the driver).
+pps_source_info which describe the capabilities of the driver).
 
 Once you have registered a new PPS source into the system you can
 signal an assert event (for example in the interrupt handler routine)
@@ -142,8 +142,10 @@ If the SYSFS filesystem is enabled in the kernel it provides a new class:
 Every directory is the ID of a PPS sources defined in the system and
 inside you find several files:
 
-   $ ls /sys/class/pps/pps0/
-   assert	clear  echo  mode  name  path  subsystem@  uevent
+   $ ls -F /sys/class/pps/pps0/
+   assert     dev        mode       path       subsystem@
+   clear      echo       name       power/     uevent
+
 
 Inside each "assert" and "clear" file you can find the timestamp and a
 sequence number:
@@ -154,32 +156,32 @@ sequence number:
 Where before the "#" is the timestamp in seconds; after it is the
 sequence number. Other files are:
 
-* echo: reports if the PPS source has an echo function or not;
+ * echo: reports if the PPS source has an echo function or not;
 
-* mode: reports available PPS functioning modes;
+ * mode: reports available PPS functioning modes;
 
-* name: reports the PPS source's name;
+ * name: reports the PPS source's name;
 
-* path: reports the PPS source's device path, that is the device the
-  PPS source is connected to (if it exists).
+ * path: reports the PPS source's device path, that is the device the
+   PPS source is connected to (if it exists).
 
 
 Testing the PPS support
 -----------------------
 
 In order to test the PPS support even without specific hardware you can use
-the ktimer driver (see the client subsection in the PPS configuration menu)
+the pps-ktimer driver (see the client subsection in the PPS configuration menu)
 and the userland tools available in your distribution's pps-tools package,
-http://linuxpps.org , or https://github.com/ago/pps-tools .
+http://linuxpps.org , or https://github.com/redlab-i/pps-tools.
 
-Once you have enabled the compilation of ktimer just modprobe it (if
+Once you have enabled the compilation of pps-ktimer just modprobe it (if
 not statically compiled):
 
-   # modprobe ktimer
+   # modprobe pps-ktimer
 
 and the run ppstest as follow:
 
-   $ ./ppstest /dev/pps0
+   $ ./ppstest /dev/pps1
    trying PPS source "/dev/pps1"
    found PPS source "/dev/pps1"
    ok, found 1 source(s), now start fetching data...
@@ -187,7 +189,7 @@ and the run ppstest as follow:
    source 0 - assert 1186592700.388931295, sequence: 365 - clear  0.000000000, sequence: 0
    source 0 - assert 1186592701.389032765, sequence: 366 - clear  0.000000000, sequence: 0
 
-Please, note that to compile userland programs you need the file timepps.h .
+Please note that to compile userland programs, you need the file timepps.h.
 This is available in the pps-tools repository mentioned above.
 
 

Documentation/rbtree.txt

@@ -193,6 +193,39 @@ Example::
   for (node = rb_first(&mytree); node; node = rb_next(node))
 	printk("key=%s\n", rb_entry(node, struct mytype, node)->keystring);
 
+Cached rbtrees
+--------------
+
+Computing the leftmost (smallest) node is quite a common task for binary
+search trees, such as for traversals or users relying on a the particular
+order for their own logic. To this end, users can use 'struct rb_root_cached'
+to optimize O(logN) rb_first() calls to a simple pointer fetch avoiding
+potentially expensive tree iterations. This is done at negligible runtime
+overhead for maintanence; albeit larger memory footprint.
+
+Similar to the rb_root structure, cached rbtrees are initialized to be
+empty via:
+
+  struct rb_root_cached mytree = RB_ROOT_CACHED;
+
+Cached rbtree is simply a regular rb_root with an extra pointer to cache the
+leftmost node. This allows rb_root_cached to exist wherever rb_root does,
+which permits augmented trees to be supported as well as only a few extra
+interfaces:
+
+  struct rb_node *rb_first_cached(struct rb_root_cached *tree);
+  void rb_insert_color_cached(struct rb_node *, struct rb_root_cached *, bool);
+  void rb_erase_cached(struct rb_node *node, struct rb_root_cached *);
+
+Both insert and erase calls have their respective counterpart of augmented
+trees:
+
+  void rb_insert_augmented_cached(struct rb_node *node, struct rb_root_cached *,
+				  bool, struct rb_augment_callbacks *);
+  void rb_erase_augmented_cached(struct rb_node *, struct rb_root_cached *,
+				 struct rb_augment_callbacks *);
+
+
 Support for Augmented rbtrees
 -----------------------------
 

Documentation/vm/hmm.txt

@@ -0,0 +1,384 @@
+Heterogeneous Memory Management (HMM)
+
+Transparently allow any component of a program to use any memory region of said
+program with a device without using device specific memory allocator. This is
+becoming a requirement to simplify the use of advance heterogeneous computing
+where GPU, DSP or FPGA are use to perform various computations.
+
+This document is divided as follow, in the first section i expose the problems
+related to the use of a device specific allocator. The second section i expose
+the hardware limitations that are inherent to many platforms. The third section
+gives an overview of HMM designs. The fourth section explains how CPU page-
+table mirroring works and what is HMM purpose in this context. Fifth section
+deals with how device memory is represented inside the kernel. Finaly the last
+section present the new migration helper that allow to leverage the device DMA
+engine.
+
+
+1) Problems of using device specific memory allocator:
+2) System bus, device memory characteristics
+3) Share address space and migration
+4) Address space mirroring implementation and API
+5) Represent and manage device memory from core kernel point of view
+6) Migrate to and from device memory
+7) Memory cgroup (memcg) and rss accounting
+
+
+-------------------------------------------------------------------------------
+
+1) Problems of using device specific memory allocator:
+
+Device with large amount of on board memory (several giga bytes) like GPU have
+historically manage their memory through dedicated driver specific API. This
+creates a disconnect between memory allocated and managed by device driver and
+regular application memory (private anonymous, share memory or regular file
+back memory). From here on i will refer to this aspect as split address space.
+I use share address space to refer to the opposite situation ie one in which
+any memory region can be use by device transparently.
+
+Split address space because device can only access memory allocated through the
+device specific API. This imply that all memory object in a program are not
+equal from device point of view which complicate large program that rely on a
+wide set of libraries.
+
+Concretly this means that code that wants to leverage device like GPU need to
+copy object between genericly allocated memory (malloc, mmap private/share/)
+and memory allocated through the device driver API (this still end up with an
+mmap but of the device file).
+
+For flat dataset (array, grid, image, ...) this isn't too hard to achieve but
+complex data-set (list, tree, ...) are hard to get right. Duplicating a complex
+data-set need to re-map all the pointer relations between each of its elements.
+This is error prone and program gets harder to debug because of the duplicate
+data-set.
+
+Split address space also means that library can not transparently use data they
+are getting from core program or other library and thus each library might have
+to duplicate its input data-set using specific memory allocator. Large project
+suffer from this and waste resources because of the various memory copy.
+
+Duplicating each library API to accept as input or output memory allocted by
+each device specific allocator is not a viable option. It would lead to a
+combinatorial explosions in the library entry points.
+
+Finaly with the advance of high level language constructs (in C++ but in other
+language too) it is now possible for compiler to leverage GPU or other devices
+without even the programmer knowledge. Some of compiler identified patterns are
+only do-able with a share address. It is as well more reasonable to use a share
+address space for all the other patterns.
+
+
+-------------------------------------------------------------------------------
+
+2) System bus, device memory characteristics
+
+System bus cripple share address due to few limitations. Most system bus only
+allow basic memory access from device to main memory, even cache coherency is
+often optional. Access to device memory from CPU is even more limited, most
+often than not it is not cache coherent.
+
+If we only consider the PCIE bus than device can access main memory (often
+through an IOMMU) and be cache coherent with the CPUs. However it only allows
+a limited set of atomic operation from device on main memory. This is worse
+in the other direction the CPUs can only access a limited range of the device
+memory and can not perform atomic operations on it. Thus device memory can not
+be consider like regular memory from kernel point of view.
+
+Another crippling factor is the limited bandwidth (~32GBytes/s with PCIE 4.0
+and 16 lanes). This is 33 times less that fastest GPU memory (1 TBytes/s).
+The final limitation is latency, access to main memory from the device has an
+order of magnitude higher latency than when the device access its own memory.
+
+Some platform are developing new system bus or additions/modifications to PCIE
+to address some of those limitations (OpenCAPI, CCIX). They mainly allow two
+way cache coherency between CPU and device and allow all atomic operations the
+architecture supports. Saddly not all platform are following this trends and
+some major architecture are left without hardware solutions to those problems.
+
+So for share address space to make sense not only we must allow device to
+access any memory memory but we must also permit any memory to be migrated to
+device memory while device is using it (blocking CPU access while it happens).
+
+
+-------------------------------------------------------------------------------
+
+3) Share address space and migration
+
+HMM intends to provide two main features. First one is to share the address
+space by duplication the CPU page table into the device page table so same
+address point to same memory and this for any valid main memory address in
+the process address space.
+
+To achieve this, HMM offer a set of helpers to populate the device page table
+while keeping track of CPU page table updates. Device page table updates are
+not as easy as CPU page table updates. To update the device page table you must
+allow a buffer (or use a pool of pre-allocated buffer) and write GPU specifics
+commands in it to perform the update (unmap, cache invalidations and flush,
+...). This can not be done through common code for all device. Hence why HMM
+provides helpers to factor out everything that can be while leaving the gory
+details to the device driver.
+
+The second mechanism HMM provide is a new kind of ZONE_DEVICE memory that does
+allow to allocate a struct page for each page of the device memory. Those page
+are special because the CPU can not map them. They however allow to migrate
+main memory to device memory using exhisting migration mechanism and everything
+looks like if page was swap out to disk from CPU point of view. Using a struct
+page gives the easiest and cleanest integration with existing mm mechanisms.
+Again here HMM only provide helpers, first to hotplug new ZONE_DEVICE memory
+for the device memory and second to perform migration. Policy decision of what
+and when to migrate things is left to the device driver.
+
+Note that any CPU access to a device page trigger a page fault and a migration
+back to main memory ie when a page backing an given address A is migrated from
+a main memory page to a device page then any CPU access to address A trigger a
+page fault and initiate a migration back to main memory.
+
+
+With this two features, HMM not only allow a device to mirror a process address
+space and keeps both CPU and device page table synchronize, but also allow to
+leverage device memory by migrating part of data-set that is actively use by a
+device.
+
+
+-------------------------------------------------------------------------------
+
+4) Address space mirroring implementation and API
+
+Address space mirroring main objective is to allow to duplicate range of CPU
+page table into a device page table and HMM helps keeping both synchronize. A
+device driver that want to mirror a process address space must start with the
+registration of an hmm_mirror struct:
+
+ int hmm_mirror_register(struct hmm_mirror *mirror,
+                         struct mm_struct *mm);
+ int hmm_mirror_register_locked(struct hmm_mirror *mirror,
+                                struct mm_struct *mm);
+
+The locked variant is to be use when the driver is already holding the mmap_sem
+of the mm in write mode. The mirror struct has a set of callback that are use
+to propagate CPU page table:
+
+ struct hmm_mirror_ops {
+     /* sync_cpu_device_pagetables() - synchronize page tables
+      *
+      * @mirror: pointer to struct hmm_mirror
+      * @update_type: type of update that occurred to the CPU page table
+      * @start: virtual start address of the range to update
+      * @end: virtual end address of the range to update
+      *
+      * This callback ultimately originates from mmu_notifiers when the CPU
+      * page table is updated. The device driver must update its page table
+      * in response to this callback. The update argument tells what action
+      * to perform.
+      *
+      * The device driver must not return from this callback until the device
+      * page tables are completely updated (TLBs flushed, etc); this is a
+      * synchronous call.
+      */
+      void (*update)(struct hmm_mirror *mirror,
+                     enum hmm_update action,
+                     unsigned long start,
+                     unsigned long end);
+ };
+
+Device driver must perform update to the range following action (turn range
+read only, or fully unmap, ...). Once driver callback returns the device must
+be done with the update.
+
+
+When device driver wants to populate a range of virtual address it can use
+either:
+ int hmm_vma_get_pfns(struct vm_area_struct *vma,
+                      struct hmm_range *range,
+                      unsigned long start,
+                      unsigned long end,
+                      hmm_pfn_t *pfns);
+ int hmm_vma_fault(struct vm_area_struct *vma,
+                   struct hmm_range *range,
+                   unsigned long start,
+                   unsigned long end,
+                   hmm_pfn_t *pfns,
+                   bool write,
+                   bool block);
+
+First one (hmm_vma_get_pfns()) will only fetch present CPU page table entry and
+will not trigger a page fault on missing or non present entry. The second one
+do trigger page fault on missing or read only entry if write parameter is true.
+Page fault use the generic mm page fault code path just like a CPU page fault.
+
+Both function copy CPU page table into their pfns array argument. Each entry in
+that array correspond to an address in the virtual range. HMM provide a set of
+flags to help driver identify special CPU page table entries.
+
+Locking with the update() callback is the most important aspect the driver must
+respect in order to keep things properly synchronize. The usage pattern is :
+
+ int driver_populate_range(...)
+ {
+      struct hmm_range range;
+      ...
+ again:
+      ret = hmm_vma_get_pfns(vma, &range, start, end, pfns);
+      if (ret)
+          return ret;
+      take_lock(driver->update);
+      if (!hmm_vma_range_done(vma, &range)) {
+          release_lock(driver->update);
+          goto again;
+      }
+
+      // Use pfns array content to update device page table
+
+      release_lock(driver->update);
+      return 0;
+ }
+
+The driver->update lock is the same lock that driver takes inside its update()
+callback. That lock must be call before hmm_vma_range_done() to avoid any race
+with a concurrent CPU page table update.
+
+HMM implements all this on top of the mmu_notifier API because we wanted to a
+simpler API and also to be able to perform optimization latter own like doing
+concurrent device update in multi-devices scenario.
+
+HMM also serve as an impedence missmatch between how CPU page table update are
+done (by CPU write to the page table and TLB flushes) from how device update
+their own page table. Device update is a multi-step process, first appropriate
+commands are write to a buffer, then this buffer is schedule for execution on
+the device. It is only once the device has executed commands in the buffer that
+the update is done. Creating and scheduling update command buffer can happen
+concurrently for multiple devices. Waiting for each device to report commands
+as executed is serialize (there is no point in doing this concurrently).
+
+
+-------------------------------------------------------------------------------
+
+5) Represent and manage device memory from core kernel point of view
+
+Several differents design were try to support device memory. First one use
+device specific data structure to keep information about migrated memory and
+HMM hooked itself in various place of mm code to handle any access to address
+that were back by device memory. It turns out that this ended up replicating
+most of the fields of struct page and also needed many kernel code path to be
+updated to understand this new kind of memory.
+
+Thing is most kernel code path never try to access the memory behind a page
+but only care about struct page contents. Because of this HMM switchted to
+directly using struct page for device memory which left most kernel code path
+un-aware of the difference. We only need to make sure that no one ever try to
+map those page from the CPU side.
+
+HMM provide a set of helpers to register and hotplug device memory as a new
+region needing struct page. This is offer through a very simple API:
+
+ struct hmm_devmem *hmm_devmem_add(const struct hmm_devmem_ops *ops,
+                                   struct device *device,
+                                   unsigned long size);
+ void hmm_devmem_remove(struct hmm_devmem *devmem);
+
+The hmm_devmem_ops is where most of the important things are:
+
+ struct hmm_devmem_ops {
+     void (*free)(struct hmm_devmem *devmem, struct page *page);
+     int (*fault)(struct hmm_devmem *devmem,
+                  struct vm_area_struct *vma,
+                  unsigned long addr,
+                  struct page *page,
+                  unsigned flags,
+                  pmd_t *pmdp);
+ };
+
+The first callback (free()) happens when the last reference on a device page is
+drop. This means the device page is now free and no longer use by anyone. The
+second callback happens whenever CPU try to access a device page which it can
+not do. This second callback must trigger a migration back to system memory.
+
+
+-------------------------------------------------------------------------------
+
+6) Migrate to and from device memory
+
+Because CPU can not access device memory, migration must use device DMA engine
+to perform copy from and to device memory. For this we need a new migration
+helper:
+
+ int migrate_vma(const struct migrate_vma_ops *ops,
+                 struct vm_area_struct *vma,
+                 unsigned long mentries,
+                 unsigned long start,
+                 unsigned long end,
+                 unsigned long *src,
+                 unsigned long *dst,
+                 void *private);
+
+Unlike other migration function it works on a range of virtual address, there
+is two reasons for that. First device DMA copy has a high setup overhead cost
+and thus batching multiple pages is needed as otherwise the migration overhead
+make the whole excersie pointless. The second reason is because driver trigger
+such migration base on range of address the device is actively accessing.
+
+The migrate_vma_ops struct define two callbacks. First one (alloc_and_copy())
+control destination memory allocation and copy operation. Second one is there
+to allow device driver to perform cleanup operation after migration.
+
+ struct migrate_vma_ops {
+     void (*alloc_and_copy)(struct vm_area_struct *vma,
+                            const unsigned long *src,
+                            unsigned long *dst,
+                            unsigned long start,
+                            unsigned long end,
+                            void *private);
+     void (*finalize_and_map)(struct vm_area_struct *vma,
+                              const unsigned long *src,
+                              const unsigned long *dst,
+                              unsigned long start,
+                              unsigned long end,
+                              void *private);
+ };
+
+It is important to stress that this migration helpers allow for hole in the
+virtual address range. Some pages in the range might not be migrated for all
+the usual reasons (page is pin, page is lock, ...). This helper does not fail
+but just skip over those pages.
+
+The alloc_and_copy() might as well decide to not migrate all pages in the
+range (for reasons under the callback control). For those the callback just
+have to leave the corresponding dst entry empty.
+
+Finaly the migration of the struct page might fails (for file back page) for
+various reasons (failure to freeze reference, or update page cache, ...). If
+that happens then the finalize_and_map() can catch any pages that was not
+migrated. Note those page were still copied to new page and thus we wasted
+bandwidth but this is considered as a rare event and a price that we are
+willing to pay to keep all the code simpler.
+
+
+-------------------------------------------------------------------------------
+
+7) Memory cgroup (memcg) and rss accounting
+
+For now device memory is accounted as any regular page in rss counters (either
+anonymous if device page is use for anonymous, file if device page is use for
+file back page or shmem if device page is use for share memory). This is a
+deliberate choice to keep existing application that might start using device
+memory without knowing about it to keep runing unimpacted.
+
+Drawbacks is that OOM killer might kill an application using a lot of device
+memory and not a lot of regular system memory and thus not freeing much system
+memory. We want to gather more real world experience on how application and
+system react under memory pressure in the presence of device memory before
+deciding to account device memory differently.
+
+
+Same decision was made for memory cgroup. Device memory page are accounted
+against same memory cgroup a regular page would be accounted to. This does
+simplify migration to and from device memory. This also means that migration
+back from device memory to regular memory can not fail because it would
+go above memory cgroup limit. We might revisit this choice latter on once we
+get more experience in how device memory is use and its impact on memory
+resource control.
+
+
+Note that device memory can never be pin nor by device driver nor through GUP
+and thus such memory is always free upon process exit. Or when last reference
+is drop in case of share memory or file back memory.

MAINTAINERS

@@ -7457,6 +7457,13 @@ S:	Maintained
 F:	tools/testing/selftests/
 F:	Documentation/dev-tools/kselftest*
 
+KERNEL USERMODE HELPER
+M:	"Luis R. Rodriguez" <mcgrof@kernel.org>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	kernel/umh.c
+F:	include/linux/umh.h
+
 KERNEL VIRTUAL MACHINE (KVM)
 M:	Paolo Bonzini <pbonzini@redhat.com>
 M:	Radim Krčmář <rkrcmar@redhat.com>
@@ -7632,7 +7639,7 @@ F:	include/linux/kmemleak.h
 F:	mm/kmemleak.c
 F:	mm/kmemleak-test.c
 
-KMOD MODULE USERMODE HELPER
+KMOD KERNEL MODULE LOADER - USERMODE HELPER
 M:	"Luis R. Rodriguez" <mcgrof@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
@@ -7790,6 +7797,13 @@ M:	Sasha Levin <alexander.levin@verizon.com>
 S:	Maintained
 F:	tools/lib/lockdep/
 
+HMM - Heterogeneous Memory Management
+M:	Jérôme Glisse <jglisse@redhat.com>
+L:	linux-mm@kvack.org
+S:	Maintained
+F:	mm/hmm*
+F:	include/linux/hmm*
+
 LIBNVDIMM BLK: MMIO-APERTURE DRIVER
 M:	Ross Zwisler <ross.zwisler@linux.intel.com>
 L:	linux-nvdimm@lists.01.org
@@ -10727,8 +10741,11 @@ W:	http://wiki.enneenne.com/index.php/LinuxPPS_support
 L:	linuxpps@ml.enneenne.com (subscribers-only)
 S:	Maintained
 F:	Documentation/pps/
+F:	Documentation/devicetree/bindings/pps/pps-gpio.txt
+F:	Documentation/ABI/testing/sysfs-pps
 F:	drivers/pps/
 F:	include/linux/pps*.h
+F:	include/uapi/linux/pps.h
 
 PPTP DRIVER
 M:	Dmitry Kozlov <xeb@mail.ru>

arch/alpha/include/asm/string.h

@@ -65,13 +65,14 @@ extern void * memchr(const void *, int, size_t);
    aligned values.  The DEST and COUNT parameters must be even for 
    correct operation.  */
 
-#define __HAVE_ARCH_MEMSETW
-extern void * __memsetw(void *dest, unsigned short, size_t count);
-
-#define memsetw(s, c, n)						 \
-(__builtin_constant_p(c)						 \
- ? __constant_c_memset((s),0x0001000100010001UL*(unsigned short)(c),(n)) \
- : __memsetw((s),(c),(n)))
+#define __HAVE_ARCH_MEMSET16
+extern void * __memset16(void *dest, unsigned short, size_t count);
+static inline void *memset16(uint16_t *p, uint16_t v, size_t n)
+{
+	if (__builtin_constant_p(v))
+		return __constant_c_memset(p, 0x0001000100010001UL * v, n * 2);
+	return __memset16(p, v, n * 2);
+}
 
 #endif /* __KERNEL__ */
 

arch/alpha/include/asm/vga.h

@@ -34,7 +34,7 @@ static inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
 	if (__is_ioaddr(s))
 		memsetw_io((u16 __iomem *) s, c, count);
 	else
-		memsetw(s, c, count);
+		memset16(s, c, count / 2);
 }
 
 /* Do not trust that the usage will be correct; analyze the arguments.  */

arch/alpha/lib/memset.S

@@ -20,7 +20,7 @@
 	.globl memset
 	.globl __memset
 	.globl ___memset
-	.globl __memsetw
+	.globl __memset16
 	.globl __constant_c_memset
 
 	.ent ___memset
@@ -110,8 +110,8 @@ EXPORT_SYMBOL(___memset)
 EXPORT_SYMBOL(__constant_c_memset)
 
 	.align 5
-	.ent __memsetw
-__memsetw:
+	.ent __memset16
+__memset16:
 	.prologue 0
 
 	inswl $17,0,$1		/* E0 */
@@ -123,8 +123,8 @@ __memsetw:
 	or $1,$4,$17		/* E0 */
 	br __constant_c_memset	/* .. E1 */
 
-	.end __memsetw
-EXPORT_SYMBOL(__memsetw)
+	.end __memset16
+EXPORT_SYMBOL(__memset16)
 
 memset = ___memset
 __memset = ___memset

arch/arm/include/asm/string.h

@@ -24,6 +24,20 @@ extern void * memchr(const void *, int, __kernel_size_t);
 #define __HAVE_ARCH_MEMSET
 extern void * memset(void *, int, __kernel_size_t);
 
+#define __HAVE_ARCH_MEMSET32
+extern void *__memset32(uint32_t *, uint32_t v, __kernel_size_t);
+static inline void *memset32(uint32_t *p, uint32_t v, __kernel_size_t n)
+{
+	return __memset32(p, v, n * 4);
+}
+
+#define __HAVE_ARCH_MEMSET64
+extern void *__memset64(uint64_t *, uint32_t low, __kernel_size_t, uint32_t hi);
+static inline void *memset64(uint64_t *p, uint64_t v, __kernel_size_t n)
+{
+	return __memset64(p, v, n * 8, v >> 32);
+}
+
 extern void __memzero(void *ptr, __kernel_size_t n);
 
 #define memset(p,v,n)							\

arch/arm/kernel/armksyms.c

@@ -87,6 +87,8 @@ EXPORT_SYMBOL(__raw_writesl);
 EXPORT_SYMBOL(strchr);
 EXPORT_SYMBOL(strrchr);
 EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(__memset32);
+EXPORT_SYMBOL(__memset64);
 EXPORT_SYMBOL(memcpy);
 EXPORT_SYMBOL(memmove);
 EXPORT_SYMBOL(memchr);

arch/arm/lib/memset.S

@@ -28,7 +28,7 @@ UNWIND( .fnstart         )
 1:	orr	r1, r1, r1, lsl #8
 	orr	r1, r1, r1, lsl #16
 	mov	r3, r1
-	cmp	r2, #16
+7:	cmp	r2, #16
 	blt	4f
 
 #if ! CALGN(1)+0
@@ -41,7 +41,7 @@ UNWIND( .fnend              )
 UNWIND( .fnstart            )
 UNWIND( .save {r8, lr}      )
 	mov	r8, r1
-	mov	lr, r1
+	mov	lr, r3
 
 2:	subs	r2, r2, #64
 	stmgeia	ip!, {r1, r3, r8, lr}	@ 64 bytes at a time.
@@ -73,11 +73,11 @@ UNWIND( .fnend                 )
 UNWIND( .fnstart               )
 UNWIND( .save {r4-r8, lr}      )
 	mov	r4, r1
-	mov	r5, r1
+	mov	r5, r3
 	mov	r6, r1
-	mov	r7, r1
+	mov	r7, r3
 	mov	r8, r1
-	mov	lr, r1
+	mov	lr, r3
 
 	cmp	r2, #96
 	tstgt	ip, #31
@@ -114,7 +114,7 @@ UNWIND( .fnstart            )
 	tst	r2, #4
 	strne	r1, [ip], #4
 /*
- * When we get here, we've got less than 4 bytes to zero.  We
+ * When we get here, we've got less than 4 bytes to set.  We
  * may have an unaligned pointer as well.
  */
 5:	tst	r2, #2
@@ -135,3 +135,15 @@ UNWIND( .fnstart            )
 UNWIND( .fnend   )
 ENDPROC(memset)
 ENDPROC(mmioset)
+
+ENTRY(__memset32)
+UNWIND( .fnstart         )
+	mov	r3, r1			@ copy r1 to r3 and fall into memset64
+UNWIND( .fnend   )
+ENDPROC(__memset32)
+ENTRY(__memset64)
+UNWIND( .fnstart         )
+	mov	ip, r0			@ preserve r0 as return value
+	b	7b			@ jump into the middle of memset
+UNWIND( .fnend   )
+ENDPROC(__memset64)

arch/arm64/kernel/smp.c

@@ -690,7 +690,7 @@ void __init smp_init_cpus(void)
 				      acpi_parse_gic_cpu_interface, 0);
 
 	if (cpu_count > nr_cpu_ids)
-		pr_warn("Number of cores (%d) exceeds configured maximum of %d - clipping\n",
+		pr_warn("Number of cores (%d) exceeds configured maximum of %u - clipping\n",
 			cpu_count, nr_cpu_ids);
 
 	if (!bootcpu_valid) {

arch/frv/Kconfig

@@ -17,6 +17,9 @@ config FRV
 	select HAVE_DEBUG_STACKOVERFLOW
 	select ARCH_NO_COHERENT_DMA_MMAP
 
+config CPU_BIG_ENDIAN
+	def_bool y
+
 config ZONE_DMA
 	bool
 	default y

arch/h8300/Kconfig

@@ -23,6 +23,9 @@ config H8300
 	select HAVE_ARCH_HASH
 	select CPU_NO_EFFICIENT_FFS
 
+config CPU_BIG_ENDIAN
+	def_bool y
+
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 

arch/m32r/configs/m32104ut_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -40,7 +39,6 @@ CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_ECN=m
@@ -48,7 +46,6 @@ CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
@@ -106,7 +103,6 @@ CONFIG_SENSORS_SMSC47M1=m
 CONFIG_SENSORS_W83781D=m
 CONFIG_SENSORS_W83L785TS=m
 CONFIG_SENSORS_W83627HF=m
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y

arch/m32r/configs/m32700ut.smp_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
@@ -30,7 +29,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 # CONFIG_IPV6 is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=m
@@ -63,7 +61,6 @@ CONFIG_SERIAL_M32R_SIO_CONSOLE=y
 CONFIG_SERIAL_M32R_PLDSIO=y
 CONFIG_HW_RANDOM=y
 CONFIG_DS1302=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_S1D13XXX=y

arch/m32r/configs/m32700ut.up_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
@@ -29,7 +28,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 # CONFIG_IPV6 is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=m
@@ -62,7 +60,6 @@ CONFIG_SERIAL_M32R_SIO_CONSOLE=y
 CONFIG_SERIAL_M32R_PLDSIO=y
 CONFIG_HW_RANDOM=y
 CONFIG_DS1302=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_S1D13XXX=y

arch/m32r/configs/mappi.nommu_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -39,7 +38,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_VT is not set
 CONFIG_SERIAL_M32R_SIO_CONSOLE=y
 CONFIG_HW_RANDOM=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_NFS_FS=y

arch/m32r/configs/mappi.smp_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -31,9 +30,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_IPV6 is not set
 # CONFIG_STANDALONE is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=m
@@ -50,7 +47,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_VT is not set
 CONFIG_SERIAL_M32R_SIO_CONSOLE=y
 CONFIG_HW_RANDOM=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_ISO9660_FS=y

arch/m32r/configs/mappi.up_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -29,9 +28,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_IPV6 is not set
 # CONFIG_STANDALONE is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=m
@@ -48,7 +45,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_VT is not set
 CONFIG_SERIAL_M32R_SIO_CONSOLE=y
 CONFIG_HW_RANDOM=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_ISO9660_FS=y

arch/m32r/configs/mappi2.opsp_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
@@ -50,7 +49,6 @@ CONFIG_SMC91X=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIAL_M32R_SIO_CONSOLE=y
 CONFIG_HW_RANDOM=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y

arch/m32r/configs/mappi2.vdec2_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
@@ -49,7 +48,6 @@ CONFIG_SMC91X=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIAL_M32R_SIO_CONSOLE=y
 CONFIG_HW_RANDOM=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y

arch/m32r/configs/mappi3.smp_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -29,9 +28,7 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 # CONFIG_IPV6 is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=m
@@ -50,7 +47,6 @@ CONFIG_SMC91X=y
 # CONFIG_VT is not set
 CONFIG_SERIAL_M32R_SIO_CONSOLE=y
 CONFIG_HW_RANDOM=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_ISO9660_FS=y

arch/m32r/configs/oaks32r_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -37,7 +36,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_VT is not set
 CONFIG_SERIAL_M32R_SIO_CONSOLE=y
 CONFIG_HW_RANDOM=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_EXT2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y

arch/m32r/configs/opsput_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
@@ -46,7 +45,6 @@ CONFIG_SERIAL_M32R_SIO_CONSOLE=y
 CONFIG_SERIAL_M32R_PLDSIO=y
 CONFIG_HW_RANDOM=y
 CONFIG_DS1302=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_ISO9660_FS=m

arch/m32r/configs/usrv_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -34,9 +33,6 @@ CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
 # CONFIG_IPV6 is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -62,7 +58,6 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_M32R_SIO is not set
 # CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set

arch/m68k/Kconfig

@@ -24,6 +24,9 @@ config M68K
 	select OLD_SIGSUSPEND3
 	select OLD_SIGACTION
 
+config CPU_BIG_ENDIAN
+	def_bool y
+
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y

arch/microblaze/Kconfig

@@ -36,6 +36,22 @@ config MICROBLAZE
 	select VIRT_TO_BUS
 	select CPU_NO_EFFICIENT_FFS
 
+# Endianness selection
+choice
+	prompt "Endianness selection"
+	default CPU_BIG_ENDIAN
+	help
+	  microblaze architectures can be configured for either little or
+	  big endian formats. Be sure to select the appropriate mode.
+
+config CPU_BIG_ENDIAN
+	bool "Big endian"
+
+config CPU_LITTLE_ENDIAN
+	bool "Little endian"
+
+endchoice
+
 config SWAP
 	def_bool n
 

arch/microblaze/Makefile

@@ -35,6 +35,8 @@ endif
 CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
 CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
 CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
+CPUFLAGS-$(CONFIG_BIG_ENDIAN) += -mbig-endian
+CPUFLAGS-$(CONFIG_LITTLE_ENDIAN) += -mlittle-endian
 
 CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
 

arch/mips/include/asm/vga.h

@@ -6,6 +6,7 @@
 #ifndef _ASM_VGA_H
 #define _ASM_VGA_H
 
+#include <linux/string.h>
 #include <asm/addrspace.h>
 #include <asm/byteorder.h>
 
@@ -40,9 +41,15 @@ static inline u16 scr_readw(volatile const u16 *addr)
 	return le16_to_cpu(*addr);
 }
 
+static inline void scr_memsetw(u16 *s, u16 v, unsigned int count)
+{
+	memset16(s, cpu_to_le16(v), count / 2);
+}
+
 #define scr_memcpyw(d, s, c) memcpy(d, s, c)
 #define scr_memmovew(d, s, c) memmove(d, s, c)
 #define VT_BUF_HAVE_MEMCPYW
 #define VT_BUF_HAVE_MEMMOVEW
+#define VT_BUF_HAVE_MEMSETW
 
 #endif /* _ASM_VGA_H */

arch/mn10300/configs/asb2303_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_TINY_RCU=y
@@ -28,16 +27,13 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -48,8 +44,6 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set

arch/mn10300/configs/asb2364_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -40,7 +39,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 CONFIG_IPV6=y
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
@@ -50,10 +48,8 @@ CONFIG_IPV6=y
 CONFIG_CONNECTOR=y
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -64,8 +60,6 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
@@ -77,7 +71,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_PROC_KCORE=y
 # CONFIG_PROC_PAGE_MONITOR is not set
@@ -93,4 +86,3 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

arch/openrisc/Kconfig

@@ -29,6 +29,9 @@ config OPENRISC
 	select CPU_NO_EFFICIENT_FFS if !OPENRISC_HAVE_INST_FF1
 	select NO_BOOTMEM
 
+config CPU_BIG_ENDIAN
+	def_bool y
+
 config MMU
 	def_bool y
 

arch/parisc/Kconfig

@@ -59,6 +59,9 @@ config PARISC
 config CPU_BIG_ENDIAN
 	def_bool y
 
+config CPU_BIG_ENDIAN
+	def_bool y
+
 config MMU
 	def_bool y
 

arch/powerpc/include/asm/vga.h

@@ -33,8 +33,16 @@ static inline u16 scr_readw(volatile const u16 *addr)
 	return le16_to_cpu(*addr);
 }
 
+#define VT_BUF_HAVE_MEMSETW
+static inline void scr_memsetw(u16 *s, u16 v, unsigned int n)
+{
+	memset16(s, cpu_to_le16(v), n / 2);
+}
+
 #define VT_BUF_HAVE_MEMCPYW
+#define VT_BUF_HAVE_MEMMOVEW
 #define scr_memcpyw	memcpy
+#define scr_memmovew	memmove
 
 #endif /* !CONFIG_VGA_CONSOLE && !CONFIG_MDA_CONSOLE */
 

arch/powerpc/kernel/paca.c

@@ -224,7 +224,7 @@ void __init allocate_pacas(void)
 	paca = __va(memblock_alloc_base(paca_size, PAGE_SIZE, limit));
 	memset(paca, 0, paca_size);
 
-	printk(KERN_DEBUG "Allocated %u bytes for %d pacas at %p\n",
+	printk(KERN_DEBUG "Allocated %u bytes for %u pacas at %p\n",
 		paca_size, nr_cpu_ids, paca);
 
 	allocate_lppacas(nr_cpu_ids, limit);

arch/powerpc/kernel/setup-common.c

@@ -551,7 +551,7 @@ void __init smp_setup_cpu_maps(void)
 		if (maxcpus > nr_cpu_ids) {
 			printk(KERN_WARNING
 			       "Partition configured for %d cpus, "
-			       "operating system maximum is %d.\n",
+			       "operating system maximum is %u.\n",
 			       maxcpus, nr_cpu_ids);
 			maxcpus = nr_cpu_ids;
 		} else

arch/powerpc/sysdev/xive/native.c

@@ -511,13 +511,13 @@ static bool xive_parse_provisioning(struct device_node *np)
 static void xive_native_setup_pools(void)
 {
 	/* Allocate a pool big enough */
-	pr_debug("XIVE: Allocating VP block for pool size %d\n", nr_cpu_ids);
+	pr_debug("XIVE: Allocating VP block for pool size %u\n", nr_cpu_ids);
 
 	xive_pool_vps = xive_native_alloc_vp_block(nr_cpu_ids);
 	if (WARN_ON(xive_pool_vps == XIVE_INVALID_VP))
 		pr_err("XIVE: Failed to allocate pool VP, KVM might not function\n");
 
-	pr_debug("XIVE: Pool VPs allocated at 0x%x for %d max CPUs\n",
+	pr_debug("XIVE: Pool VPs allocated at 0x%x for %u max CPUs\n",
 		 xive_pool_vps, nr_cpu_ids);
 }
 

arch/sh/configs/ap325rxa_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -28,14 +27,10 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -51,8 +46,6 @@ CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
@@ -82,7 +75,6 @@ CONFIG_FB=y
 CONFIG_FB_SH_MOBILE_LCDC=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_SPI=y
@@ -110,8 +102,6 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_932=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/apsh4a3a_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
@@ -28,15 +27,11 @@ CONFIG_INET=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -46,8 +41,6 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -66,7 +59,6 @@ CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
@@ -96,7 +88,6 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set

arch/sh/configs/apsh4ad0a_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -53,7 +52,6 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -70,8 +68,6 @@ CONFIG_NETDEVICES=y
 CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
@@ -83,7 +79,6 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
 CONFIG_FB_SH7785FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -124,6 +119,5 @@ CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_VM=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_DWARF_UNWINDER=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/cayman_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -19,7 +18,6 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -38,7 +36,6 @@ CONFIG_NET_ETHERNET=y
 CONFIG_HW_RANDOM=y
 CONFIG_I2C=m
 CONFIG_WATCHDOG=y
-CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
@@ -67,5 +64,4 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_SCHEDSTATS=y
 CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/dreamcast_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -32,7 +31,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
@@ -43,8 +41,6 @@ CONFIG_NET_ETHERNET=y
 CONFIG_NET_PCI=y
 CONFIG_8139TOO=y
 # CONFIG_8139TOO_PIO is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_MAPLE=y
 # CONFIG_MOUSE_PS2 is not set
@@ -56,7 +52,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_SH_WDT=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_PVR2=y
@@ -74,5 +69,4 @@ CONFIG_LOGO=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/ecovec24-romimage_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -26,19 +25,15 @@ CONFIG_INET=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SH_ETH=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
@@ -51,7 +46,6 @@ CONFIG_I2C=y
 CONFIG_I2C_SH_MOBILE=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
 CONFIG_USB_R8A66597_HCD=y
 CONFIG_USB_STORAGE=y
@@ -64,4 +58,3 @@ CONFIG_TMPFS=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

arch/sh/configs/ecovec24_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -29,16 +28,12 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_IRDA=y
 CONFIG_SH_SIR=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -53,8 +48,6 @@ CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SH_ETH=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
@@ -140,8 +133,6 @@ CONFIG_NLS_CODEPAGE_932=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/edosk7705_defconfig

@@ -20,7 +20,6 @@ CONFIG_CPU_SUBTYPE_SH7705=y
 CONFIG_SH_EDOSK7705=y
 CONFIG_SH_PCLK_FREQ=31250000
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_MISC_DEVICES is not set
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
@@ -35,5 +34,4 @@ CONFIG_SH_PCLK_FREQ=31250000
 # CONFIG_SYSFS is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRC32 is not set

arch/sh/configs/edosk7760_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_LOCALVERSION="_edosk7760"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -31,7 +30,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -39,10 +37,7 @@ CONFIG_DEBUG_DRIVER=y
 CONFIG_DEBUG_DEVRES=y
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
@@ -62,12 +57,9 @@ CONFIG_MTD_ABSENT=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=26000
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
@@ -92,7 +84,6 @@ CONFIG_SND=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_SOC=y
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
@@ -119,8 +110,6 @@ CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_DES=y

arch/sh/configs/espt_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -26,13 +25,10 @@ CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
@@ -43,14 +39,11 @@ CONFIG_MTD_CFI_GEOMETRY=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SH_ETH=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
@@ -65,7 +58,6 @@ CONFIG_FB_FOREIGN_ENDIAN=y
 CONFIG_FB_SH7760=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
 CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
@@ -73,7 +65,6 @@ CONFIG_USB_STORAGE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
@@ -123,6 +114,5 @@ CONFIG_NLS_UTF8=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_T10DIF=y

arch/sh/configs/hp6xx_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -37,7 +36,6 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=3
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_LEGACY_PTY_COUNT=64
 # CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_HIT=y
@@ -46,7 +44,6 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_PEARL_8x8=y
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_SH=y
@@ -55,7 +52,6 @@ CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_ECB=y

arch/sh/configs/kfr2r09-romimage_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -26,12 +25,10 @@ CONFIG_INET=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_MISC_DEVICES is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
@@ -44,7 +41,6 @@ CONFIG_I2C=y
 CONFIG_I2C_SH_MOBILE=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_CDC_COMPOSITE=y
 # CONFIG_DNOTIFY is not set
@@ -55,5 +51,4 @@ CONFIG_TMPFS=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRC32 is not set

arch/sh/configs/kfr2r09_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -33,15 +32,12 @@ CONFIG_INET=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
@@ -49,7 +45,6 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_GENERIC=y
 CONFIG_MTD_UBI=y
-# CONFIG_MISC_DEVICES is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
@@ -77,7 +72,6 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_CLUT224 is not set
-# CONFIG_HID_SUPPORT is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y
@@ -91,4 +85,3 @@ CONFIG_TMPFS=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

arch/sh/configs/landisk_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_SYSCTL_SYSCALL is not set
@@ -24,10 +23,8 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_PNP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
-CONFIG_IP_NF_QUEUE=m
 CONFIG_ATALK=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_LOOP=y
@@ -118,7 +115,6 @@ CONFIG_NFSD_V3=y
 CONFIG_SMB_FS=m
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_932=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_T10DIF=y

arch/sh/configs/lboxre2_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_SYSCTL_SYSCALL is not set
@@ -28,7 +27,6 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_PNP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -61,7 +59,6 @@ CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_ROMFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_T10DIF=y

arch/sh/configs/magicpanelr2_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -35,16 +34,13 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -55,8 +51,6 @@ CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_SERIAL_8250=y
@@ -68,7 +62,6 @@ CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
@@ -96,7 +89,5 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_KOBJECT=y
 CONFIG_DEBUG_INFO=y
 CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m

arch/sh/configs/microdev_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
@@ -19,7 +18,6 @@ CONFIG_SUPERHYWAY=y
 CONFIG_NET=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -45,6 +43,5 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_CRYPTO_ECB=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/migor_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -26,15 +25,11 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_FW_LOADER=m
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -47,8 +42,6 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
@@ -101,7 +94,6 @@ CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set

arch/sh/configs/polaris_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
@@ -37,14 +36,11 @@ CONFIG_IP_MULTICAST=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -57,8 +53,6 @@ CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
@@ -71,7 +65,6 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_SH=y
@@ -91,5 +84,3 @@ CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_SG=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y

arch/sh/configs/r7780mp_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
@@ -35,13 +34,11 @@ CONFIG_INET=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_BRIDGE=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_FW_LOADER=m
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
@@ -110,7 +107,6 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y

arch/sh/configs/r7785rp_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -42,7 +41,6 @@ CONFIG_INET=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_BRIDGE=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -104,7 +102,6 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SH_STANDARD_BIOS=y
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_4KSTACKS=y

arch/sh/configs/rsk7201_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -37,10 +36,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -58,8 +54,6 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_SH=y
@@ -71,5 +65,3 @@ CONFIG_ROMFS_FS=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y

arch/sh/configs/rsk7203_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -44,7 +43,6 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -52,10 +50,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -64,8 +59,6 @@ CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -81,7 +74,6 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 CONFIG_REGULATOR=y
-CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -130,6 +122,4 @@ CONFIG_DEBUG_VM=y
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_SG=y
 CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_DEBUG_STACK_USAGE=y

arch/sh/configs/rsk7264_defconfig

@@ -35,7 +35,6 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -61,11 +60,9 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HWMON is not set
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_R8A66597_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_USB_LIBUSUAL=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

arch/sh/configs/rsk7269_defconfig

@@ -24,7 +24,6 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -44,11 +43,9 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HWMON is not set
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_R8A66597_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_USB_LIBUSUAL=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
@@ -60,5 +57,4 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_FTRACE is not set

arch/sh/configs/rts7751r2d1_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -22,7 +21,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_FW_LOADER=m
@@ -48,7 +46,6 @@ CONFIG_HW_RANDOM=y
 CONFIG_SPI=y
 CONFIG_SPI_SH_SCI=y
 CONFIG_MFD_SM501=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
@@ -83,7 +80,6 @@ CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_R9701=y
 CONFIG_EXT2_FS=y
@@ -94,6 +90,5 @@ CONFIG_TMPFS=y
 CONFIG_MINIX_FS=y
 CONFIG_NLS_CODEPAGE_932=y
 CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_T10DIF=y

arch/sh/configs/rts7751r2dplus_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -22,15 +21,11 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_FW_LOADER=m
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP=y
@@ -56,7 +51,6 @@ CONFIG_HW_RANDOM=y
 CONFIG_SPI=y
 CONFIG_SPI_SH_SCI=y
 CONFIG_MFD_SM501=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
@@ -91,7 +85,6 @@ CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_R9701=y
 CONFIG_EXT2_FS=y
@@ -102,6 +95,5 @@ CONFIG_TMPFS=y
 CONFIG_MINIX_FS=y
 CONFIG_NLS_CODEPAGE_932=y
 CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_T10DIF=y

arch/sh/configs/sdk7780_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_LOCALVERSION="_SDK7780"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -39,7 +38,6 @@ CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
 # CONFIG_INET6_XFRM_MODE_BEET is not set
 CONFIG_NET_SCHED=y
@@ -47,7 +45,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_PARPORT=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_PLATFORM=y
@@ -63,8 +60,6 @@ CONFIG_BLK_DEV_DM=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 CONFIG_NETCONSOLE=y
 CONFIG_INPUT_FF_MEMLESS=m
 CONFIG_INPUT_EVDEV=y
@@ -78,7 +73,6 @@ CONFIG_SSB=y
 CONFIG_SSB_DRIVER_PCICORE=y
 CONFIG_FB=y
 CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_DISPLAY_SUPPORT=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
@@ -101,7 +95,6 @@ CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -144,8 +137,6 @@ CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_SH_STANDARD_BIOS=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_DES=y

arch/sh/configs/sdk7786_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -90,13 +89,11 @@ CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_FTL=y
@@ -119,7 +116,6 @@ CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_PLATFORM=y
@@ -140,8 +136,6 @@ CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_SH_SCI=y
@@ -157,7 +151,6 @@ CONFIG_SPI=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_SH_WDT=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_USB=y
 CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
@@ -223,9 +216,7 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_RCU_CPU_STALL_VERBOSE is not set
 CONFIG_LATENCYTOP=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_FUNCTION_TRACER=y
 # CONFIG_FUNCTION_GRAPH_TRACER is not set
 CONFIG_DMA_API_DEBUG=y

arch/sh/configs/se7206_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -57,7 +56,6 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -65,9 +63,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -78,8 +73,6 @@ CONFIG_EEPROM_93CX6=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
@@ -109,7 +102,6 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_VM=y
 CONFIG_DEBUG_LIST=y
 CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y

arch/sh/configs/se7343_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -27,26 +26,19 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 CONFIG_USB_USBNET=y
 # CONFIG_USB_NET_AX8817X is not set
 CONFIG_USB_NET_DM9601=y
@@ -104,5 +96,4 @@ CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFSD=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/se7619_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_UID16 is not set
@@ -24,10 +23,7 @@ CONFIG_BINFMT_ZFLAT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -48,4 +44,3 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_SYSFS is not set
 CONFIG_ROMFS_FS=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

arch/sh/configs/se7705_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
@@ -27,11 +26,8 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -58,5 +54,4 @@ CONFIG_PROC_KCORE=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/se7712_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
@@ -47,7 +46,6 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_NET_SCHED=y
@@ -68,9 +66,6 @@ CONFIG_NET_CLS_FW=y
 CONFIG_NET_CLS_IND=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -104,8 +99,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
 CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/se7721_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
@@ -46,7 +45,6 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_NET_SCHED=y
@@ -67,9 +65,6 @@ CONFIG_NET_CLS_FW=y
 CONFIG_NET_CLS_IND=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -132,6 +127,5 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
 CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_CCITT=y

arch/sh/configs/se7722_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
@@ -26,7 +25,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -57,6 +55,5 @@ CONFIG_PRINTK_TIME=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/se7724_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -30,14 +29,10 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -53,8 +48,6 @@ CONFIG_SMSC_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SH_ETH=y
 CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
@@ -137,8 +130,6 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_932=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/se7750_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -25,11 +24,8 @@ CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -58,5 +54,4 @@ CONFIG_ROOT_NFS=y
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_MSDOS_PARTITION is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/se7751_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -25,12 +24,9 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
-CONFIG_IP_NF_QUEUE=y
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -48,5 +44,4 @@ CONFIG_EXT2_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/se7780_defconfig

@@ -24,7 +24,6 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_PNP=y
-# CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
@@ -32,8 +31,6 @@ CONFIG_IPV6=y
 # CONFIG_IPV6_SIT is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -54,8 +51,6 @@ CONFIG_SMSC_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 CONFIG_NET_PCI=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -94,7 +89,6 @@ CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
@@ -110,5 +104,4 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/secureedge5410_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
@@ -18,12 +17,9 @@ CONFIG_INET=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK_RO=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -34,14 +30,11 @@ CONFIG_MTD_CFI_GEOMETRY=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PLATRAM=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_NET_PCI=y
 CONFIG_8139CP=y
 CONFIG_8139TOO=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
@@ -51,7 +44,6 @@ CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1302=y
@@ -60,4 +52,3 @@ CONFIG_EXT2_FS=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 CONFIG_ROMFS_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

arch/sh/configs/sh03_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -34,7 +33,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
@@ -70,7 +68,6 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
@@ -126,7 +123,6 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SH_STANDARD_BIOS=y
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_HMAC=y

arch/sh/configs/sh2007_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -42,7 +41,6 @@ CONFIG_NET_IPIP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NET_PKTGEN=y
@@ -50,7 +48,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_CDROM_PKTCDVD=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_RAID_ATTRS=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
@@ -72,8 +69,6 @@ CONFIG_TUN=y
 CONFIG_VETH=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_FF_MEMLESS=y
 # CONFIG_INPUT_MOUSEDEV is not set
@@ -95,9 +90,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_MON=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -172,7 +165,6 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_DEBUG_INFO=y
 CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SH_STANDARD_BIOS=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_AUTHENC=y

arch/sh/configs/sh7710voipgw_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -24,7 +23,6 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
@@ -36,8 +34,6 @@ CONFIG_NET_CLS_ROUTE4=y
 CONFIG_NET_CLS_U32=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -59,5 +55,4 @@ CONFIG_THERMAL=y
 # CONFIG_DNOTIFY is not set
 CONFIG_JFFS2_FS=y
 CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/sh7724_generic_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_CGROUPS=y
@@ -18,7 +17,6 @@ CONFIG_HIBERNATION=y
 CONFIG_CPU_IDLE=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_MISC_DEVICES is not set
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
@@ -44,5 +42,4 @@ CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRC32 is not set

arch/sh/configs/sh7757lcr_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -32,13 +31,11 @@ CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
 CONFIG_BLK_DEV_RAM=y
@@ -48,7 +45,6 @@ CONFIG_NETDEVICES=y
 CONFIG_VITESSE_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SH_ETH=y
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_MOUSE_PS2 is not set

arch/sh/configs/sh7763rdp_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -26,11 +25,9 @@ CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_CFI=y
@@ -43,14 +40,11 @@ CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SH_ETH=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
@@ -65,7 +59,6 @@ CONFIG_FB_FOREIGN_ENDIAN=y
 CONFIG_FB_SH7760=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
 CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
@@ -74,7 +67,6 @@ CONFIG_MMC=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
@@ -124,6 +116,5 @@ CONFIG_NLS_UTF8=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_T10DIF=y

arch/sh/configs/sh7770_generic_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_CGROUPS=y
@@ -20,7 +19,6 @@ CONFIG_HIBERNATION=y
 CONFIG_CPU_IDLE=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_MISC_DEVICES is not set
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
@@ -46,5 +44,4 @@ CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRC32 is not set

arch/sh/configs/sh7785lcr_32bit_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -44,13 +43,9 @@ CONFIG_INET=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -58,7 +53,6 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
@@ -69,7 +63,6 @@ CONFIG_NET_ETHERNET=y
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
 CONFIG_R8169=y
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_FF_MEMLESS=m
 CONFIG_INPUT_EVDEV=y
@@ -113,7 +106,6 @@ CONFIG_SND_CMIPCI=y
 CONFIG_SND_EMU10K1=y
 # CONFIG_SND_SUPERH is not set
 CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_R8A66597_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
@@ -154,9 +146,7 @@ CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_LATENCYTOP=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_FTRACE is not set
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/sh7785lcr_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
@@ -26,27 +25,21 @@ CONFIG_INET=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
 CONFIG_SATA_SIL=y
 CONFIG_NETDEVICES=y
 CONFIG_R8169=y
-# CONFIG_NETDEV_10000 is not set
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_KEYBOARD_ATKBD is not set
@@ -121,8 +114,6 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set

arch/sh/configs/shmin_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_UID16 is not set
@@ -28,10 +27,8 @@ CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
@@ -53,6 +50,5 @@ CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/shx3_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -56,7 +55,6 @@ CONFIG_NET=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
 CONFIG_CAN=m
 CONFIG_CAN_RAW=m
 CONFIG_CAN_BCM=m
@@ -70,8 +68,6 @@ CONFIG_PATA_PLATFORM=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
@@ -82,7 +78,6 @@ CONFIG_I2C=m
 CONFIG_SPI=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_USB=y
 CONFIG_USB_MON=y
 CONFIG_USB_R8A66597_HCD=m
@@ -104,7 +99,6 @@ CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_VM=y
 CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SH_STANDARD_BIOS=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/titan_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -49,7 +48,6 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_IPV6=y
 CONFIG_IPV6_PRIVACY=y
@@ -79,7 +77,6 @@ CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
@@ -88,7 +85,6 @@ CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
@@ -96,7 +92,6 @@ CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -106,7 +101,6 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
@@ -154,7 +148,6 @@ CONFIG_FW_LOADER=m
 CONFIG_CONNECTOR=m
 CONFIG_MTD=m
 CONFIG_MTD_DEBUG=y
-CONFIG_MTD_CHAR=m
 CONFIG_MTD_BLOCK=m
 CONFIG_FTL=m
 CONFIG_NFTL=m
@@ -261,7 +254,6 @@ CONFIG_NLS_UTF8=m
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_MD4=m

arch/sh/configs/ul2_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
@@ -29,7 +28,6 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
@@ -37,9 +35,6 @@ CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -50,8 +45,6 @@ CONFIG_ATA=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 CONFIG_LIBERTAS=m
 CONFIG_LIBERTAS_SDIO=m
 CONFIG_LIBERTAS_DEBUG=y
@@ -70,7 +63,6 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
 CONFIG_USB_MON=y
 CONFIG_USB_R8A66597_HCD=y
@@ -92,6 +84,5 @@ CONFIG_NLS_CODEPAGE_932=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_CRYPTO_MICHAEL_MIC=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/urquell_defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -46,20 +45,15 @@ CONFIG_INET=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
@@ -73,7 +67,6 @@ CONFIG_NET_PCI=y
 CONFIG_8139CP=y
 CONFIG_SKY2=y
 CONFIG_SKY2_DEBUG=y
-# CONFIG_NETDEV_10000 is not set
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_KEYBOARD_ATKBD is not set
@@ -150,8 +143,6 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
 CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_FTRACE is not set
 # CONFIG_DUMP_CODE is not set
 CONFIG_CRYPTO_HMAC=y

arch/sparc/Kconfig

@@ -97,6 +97,9 @@ config ARCH_PROC_KCORE_TEXT
 config CPU_BIG_ENDIAN
 	def_bool y
 
+config CPU_BIG_ENDIAN
+	def_bool y
+
 config ARCH_ATU
 	bool
 	default y if SPARC64

arch/sparc/include/asm/vga.h

@@ -8,9 +8,13 @@
 #define _LINUX_ASM_VGA_H_
 
 #include <linux/bug.h>
+#include <linux/string.h>
 #include <asm/types.h>
 
 #define VT_BUF_HAVE_RW
+#define VT_BUF_HAVE_MEMSETW
+#define VT_BUF_HAVE_MEMCPYW
+#define VT_BUF_HAVE_MEMMOVEW
 
 #undef scr_writew
 #undef scr_readw
@@ -29,6 +33,27 @@ static inline u16 scr_readw(const u16 *addr)
 	return *addr;
 }
 
+static inline void scr_memsetw(u16 *p, u16 v, unsigned int n)
+{
+	BUG_ON((long) p >= 0);
+
+	memset16(p, cpu_to_le16(v), n / 2);
+}
+
+static inline void scr_memcpyw(u16 *d, u16 *s, unsigned int n)
+{
+	BUG_ON((long) d >= 0);
+
+	memcpy(d, s, n);
+}
+
+static inline void scr_memmovew(u16 *d, u16 *s, unsigned int n)
+{
+	BUG_ON((long) d >= 0);
+
+	memmove(d, s, n);
+}
+
 #define VGA_MAP_MEM(x,s) (x)
 
 #endif

arch/tile/kernel/setup.c

@@ -1200,7 +1200,7 @@ static void __init validate_hv(void)
 	 * We use a struct cpumask for this, so it must be big enough.
 	 */
 	if ((smp_height * smp_width) > nr_cpu_ids)
-		early_panic("Hypervisor %d x %d grid too big for Linux NR_CPUS %d\n",
+		early_panic("Hypervisor %d x %d grid too big for Linux NR_CPUS %u\n",
 			    smp_height, smp_width, nr_cpu_ids);
 #endif
 

arch/x86/Kconfig

@@ -2323,6 +2323,10 @@ source "kernel/livepatch/Kconfig"
 
 endmenu
 
+config ARCH_HAS_ADD_PAGES
+	def_bool y
+	depends on X86_64 && ARCH_ENABLE_MEMORY_HOTPLUG
+
 config ARCH_ENABLE_MEMORY_HOTPLUG
 	def_bool y
 	depends on X86_64 || (X86_32 && HIGHMEM)
@@ -2343,6 +2347,10 @@ config ARCH_ENABLE_HUGEPAGE_MIGRATION
 	def_bool y
 	depends on X86_64 && HUGETLB_PAGE && MIGRATION
 
+config ARCH_ENABLE_THP_MIGRATION
+	def_bool y
+	depends on X86_64 && TRANSPARENT_HUGEPAGE
+
 menu "Power management and ACPI options"
 
 config ARCH_HIBERNATION_HEADER

arch/x86/include/asm/pgtable.h

@@ -1172,6 +1172,23 @@ static inline pte_t pte_swp_clear_soft_dirty(pte_t pte)
 {
 	return pte_clear_flags(pte, _PAGE_SWP_SOFT_DIRTY);
 }
+
+#ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
+static inline pmd_t pmd_swp_mksoft_dirty(pmd_t pmd)
+{
+	return pmd_set_flags(pmd, _PAGE_SWP_SOFT_DIRTY);
+}
+
+static inline int pmd_swp_soft_dirty(pmd_t pmd)
+{
+	return pmd_flags(pmd) & _PAGE_SWP_SOFT_DIRTY;
+}
+
+static inline pmd_t pmd_swp_clear_soft_dirty(pmd_t pmd)
+{
+	return pmd_clear_flags(pmd, _PAGE_SWP_SOFT_DIRTY);
+}
+#endif
 #endif
 
 #define PKRU_AD_BIT 0x1

arch/x86/include/asm/pgtable_64.h

@@ -180,15 +180,21 @@ static inline int pgd_large(pgd_t pgd) { return 0; }
 /*
  * Encode and de-code a swap entry
  *
- * |     ...            | 11| 10|  9|8|7|6|5| 4| 3|2|1|0| <- bit number
- * |     ...            |SW3|SW2|SW1|G|L|D|A|CD|WT|U|W|P| <- bit names
- * | OFFSET (14->63) | TYPE (9-13)  |0|X|X|X| X| X|X|X|0| <- swp entry
+ * |     ...            | 11| 10|  9|8|7|6|5| 4| 3|2| 1|0| <- bit number
+ * |     ...            |SW3|SW2|SW1|G|L|D|A|CD|WT|U| W|P| <- bit names
+ * | OFFSET (14->63) | TYPE (9-13)  |0|0|X|X| X| X|X|SD|0| <- swp entry
  *
  * G (8) is aliased and used as a PROT_NONE indicator for
  * !present ptes.  We need to start storing swap entries above
  * there.  We also need to avoid using A and D because of an
  * erratum where they can be incorrectly set by hardware on
  * non-present PTEs.
+ *
+ * SD (1) in swp entry is used to store soft dirty bit, which helps us
+ * remember soft dirty over page migration
+ *
+ * Bit 7 in swp entry should be 0 because pmd_present checks not only P,
+ * but also L and G.
  */
 #define SWP_TYPE_FIRST_BIT (_PAGE_BIT_PROTNONE + 1)
 #define SWP_TYPE_BITS 5
@@ -204,7 +210,9 @@ static inline int pgd_large(pgd_t pgd) { return 0; }
 					 ((type) << (SWP_TYPE_FIRST_BIT)) \
 					 | ((offset) << SWP_OFFSET_FIRST_BIT) })
 #define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val((pte)) })
+#define __pmd_to_swp_entry(pmd)		((swp_entry_t) { pmd_val((pmd)) })
 #define __swp_entry_to_pte(x)		((pte_t) { .pte = (x).val })
+#define __swp_entry_to_pmd(x)		((pmd_t) { .pmd = (x).val })
 
 extern int kern_addr_valid(unsigned long addr);
 extern void cleanup_highmap(void);

arch/x86/include/asm/pgtable_types.h

@@ -99,15 +99,15 @@
 /*
  * Tracking soft dirty bit when a page goes to a swap is tricky.
  * We need a bit which can be stored in pte _and_ not conflict
- * with swap entry format. On x86 bits 6 and 7 are *not* involved
- * into swap entry computation, but bit 6 is used for nonlinear
- * file mapping, so we borrow bit 7 for soft dirty tracking.
+ * with swap entry format. On x86 bits 1-4 are *not* involved
+ * into swap entry computation, but bit 7 is used for thp migration,
+ * so we borrow bit 1 for soft dirty tracking.
  *
  * Please note that this bit must be treated as swap dirty page
- * mark if and only if the PTE has present bit clear!
+ * mark if and only if the PTE/PMD has present bit clear!
  */
 #ifdef CONFIG_MEM_SOFT_DIRTY
-#define _PAGE_SWP_SOFT_DIRTY	_PAGE_PSE
+#define _PAGE_SWP_SOFT_DIRTY	_PAGE_RW
 #else
 #define _PAGE_SWP_SOFT_DIRTY	(_AT(pteval_t, 0))
 #endif