Merge back earlier 'pm-sleep' material.

CREDITS

@@ -655,6 +655,11 @@ S: Stanford University
 S: Stanford, California 94305
 S: USA
 
+N: Carlos Chinea
+E: carlos.chinea@nokia.com
+E: cch.devel@gmail.com
+D: Author of HSI Subsystem
+
 N: Randolph Chung
 E: tausq@debian.org
 D: Linux/PA-RISC hacker

Documentation/DocBook/media/v4l/vidioc-expbuf.xml

@@ -73,7 +73,8 @@ range from zero to the maximal number of valid planes for the currently active
 format. For the single-planar API, applications must set <structfield> plane
 </structfield> to zero.  Additional flags may be posted in the <structfield>
 flags </structfield> field.  Refer to a manual for open() for details.
-Currently only O_CLOEXEC is supported.  All other fields must be set to zero.
+Currently only O_CLOEXEC, O_RDONLY, O_WRONLY, and O_RDWR are supported.  All
+other fields must be set to zero.
 In the case of multi-planar API, every plane is exported separately using
 multiple <constant> VIDIOC_EXPBUF </constant> calls. </para>
 
@@ -170,8 +171,9 @@ multi-planar API. Otherwise this value must be set to zero. </entry>
 	    <entry>__u32</entry>
 	    <entry><structfield>flags</structfield></entry>
 	    <entry>Flags for the newly created file, currently only <constant>
-O_CLOEXEC </constant> is supported, refer to the manual of open() for more
-details.</entry>
+O_CLOEXEC </constant>, <constant>O_RDONLY</constant>, <constant>O_WRONLY
+</constant>, and <constant>O_RDWR</constant> are supported, refer to the manual
+of open() for more details.</entry>
 	  </row>
 	  <row>
 	    <entry>__s32</entry>

Documentation/assoc_array.txt

@@ -164,10 +164,10 @@ This points to a number of methods, all of which need to be provided:
 
  (4) Diff the index keys of two objects.
 
-	int (*diff_objects)(const void *a, const void *b);
+	int (*diff_objects)(const void *object, const void *index_key);
 
-     Return the bit position at which the index keys of two objects differ or
-     -1 if they are the same.
+     Return the bit position at which the index key of the specified object
+     differs from the given index key or -1 if they are the same.
 
 
  (5) Free an object.

Documentation/device-mapper/cache.txt

@@ -266,10 +266,12 @@ E.g.
 Invalidation is removing an entry from the cache without writing it
 back.  Cache blocks can be invalidated via the invalidate_cblocks
 message, which takes an arbitrary number of cblock ranges.  Each cblock
-must be expressed as a decimal value, in the future a variant message
-that takes cblock ranges expressed in hexidecimal may be needed to
-better support efficient invalidation of larger caches.  The cache must
-be in passthrough mode when invalidate_cblocks is used.
+range's end value is "one past the end", meaning 5-10 expresses a range
+of values from 5 to 9.  Each cblock must be expressed as a decimal
+value, in the future a variant message that takes cblock ranges
+expressed in hexidecimal may be needed to better support efficient
+invalidation of larger caches.  The cache must be in passthrough mode
+when invalidate_cblocks is used.
 
    invalidate_cblocks [<cblock>|<cblock begin>-<cblock end>]*
 

Documentation/devicetree/bindings/arm/omap/mpu.txt

@@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM.
 Required properties:
 - compatible : Should be "ti,omap3-mpu" for OMAP3
                Should be "ti,omap4-mpu" for OMAP4
+	       Should be "ti,omap5-mpu" for OMAP5
 - ti,hwmods: "mpu"
 
 Examples:
 
+- For an OMAP5 SMP system:
+
+mpu {
+    compatible = "ti,omap5-mpu";
+    ti,hwmods = "mpu"
+};
+
 - For an OMAP4 SMP system:
 
 mpu {

Documentation/devicetree/bindings/arm/pmu.txt

@@ -7,6 +7,7 @@ representation in the device tree should be done as under:-
 Required properties:
 
 - compatible : should be one of
+	"arm,armv8-pmuv3"
 	"arm,cortex-a15-pmu"
 	"arm,cortex-a9-pmu"
 	"arm,cortex-a8-pmu"

Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt

@@ -49,7 +49,7 @@ adc@12D10000 {
 	/* NTC thermistor is a hwmon device */
 	ncp15wb473@0 {
 		compatible = "ntc,ncp15wb473";
-		pullup-uV = <1800000>;
+		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
 		io-channels = <&adc 4>;

Documentation/devicetree/bindings/clock/exynos4-clock.txt

@@ -6,7 +6,7 @@ SoC's in the Exynos4 family.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
   - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
 

Documentation/devicetree/bindings/clock/exynos5250-clock.txt

@@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
 
 - reg: physical base address of the controller and length of memory mapped

Documentation/devicetree/bindings/clock/exynos5420-clock.txt

@@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
 
 - reg: physical base address of the controller and length of memory mapped

Documentation/devicetree/bindings/clock/exynos5440-clock.txt

@@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC.
 
 Required Properties:
 
-- comptible: should be "samsung,exynos5440-clock".
+- compatible: should be "samsung,exynos5440-clock".
 
 - reg: physical base address of the controller and length of memory mapped
   region.

Documentation/devicetree/bindings/gpio/8xxx_gpio.txt

@@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on
 
 Every GPIO controller node must have #gpio-cells property defined,
 this information will be used to translate gpio-specifiers.
+See bindings/gpio/gpio.txt for details of how to specify GPIO
+information for devices.
+
+The GPIO module usually is connected to the SoC's internal interrupt
+controller, see bindings/interrupt-controller/interrupts.txt (the
+interrupt client nodes section) for details how to specify this GPIO
+module's interrupt.
+
+The GPIO module may serve as another interrupt controller (cascaded to
+the SoC's internal interrupt controller).  See the interrupt controller
+nodes section in bindings/interrupt-controller/interrupts.txt for
+details.
 
 Required properties:
-- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
-  83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters (currently unused).
- - interrupts : Interrupt mapping for GPIO IRQ.
- - interrupt-parent : Phandle for the interrupt controller that
-   services interrupts for this device.
-- gpio-controller : Marks the port as GPIO controller.
+- compatible:		"fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
+			for 83xx, "fsl,mpc8572-gpio" for 85xx, or
+			"fsl,mpc8610-gpio" for 86xx.
+- #gpio-cells:		Should be two. The first cell is the pin number
+			and the second cell is used to specify optional
+			parameters (currently unused).
+- interrupt-parent:	Phandle for the interrupt controller that
+			services interrupts for this device.
+- interrupts:		Interrupt mapping for GPIO IRQ.
+- gpio-controller:	Marks the port as GPIO controller.
+
+Optional properties:
+- interrupt-controller:	Empty boolean property which marks the GPIO
+			module as an IRQ controller.
+- #interrupt-cells:	Should be two.  Defines the number of integer
+			cells required to specify an interrupt within
+			this interrupt controller.  The first cell
+			defines the pin number, the second cell
+			defines additional flags (trigger type,
+			trigger polarity).  Note that the available
+			set of trigger conditions supported by the
+			GPIO module depends on the actual SoC.
 
 Example of gpio-controller nodes for a MPC8347 SoC:
 
@@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC:
 		#gpio-cells = <2>;
 		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
 		reg = <0xc00 0x100>;
-		interrupts = <74 0x8>;
 		interrupt-parent = <&ipic>;
+		interrupts = <74 0x8>;
 		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 	};
 
 	gpio2: gpio-controller@d00 {
 		#gpio-cells = <2>;
 		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
 		reg = <0xd00 0x100>;
-		interrupts = <75 0x8>;
 		interrupt-parent = <&ipic>;
+		interrupts = <75 0x8>;
 		gpio-controller;
 	};
 
-See booting-without-of.txt for details of how to specify GPIO
-information for devices.
-
-To use GPIO pins as interrupt sources for peripherals, specify the
-GPIO controller as the interrupt parent and define GPIO number +
-trigger mode using the interrupts property, which is defined like
-this:
-
-interrupts = <number trigger>, where:
- - number: GPIO pin (0..31)
- - trigger: trigger mode:
-	2 = trigger on falling edge
-	3 = trigger on both edges
-
-Example of device using this is:
+Example of a peripheral using the GPIO module as an IRQ controller:
 
 	funkyfpga@0 {
 		compatible = "funky-fpga";
 		...
-		interrupts = <4 3>;
 		interrupt-parent = <&gpio1>;
+		interrupts = <4 3>;
 	};

Documentation/devicetree/bindings/mmc/ti-omap.txt

@@ -0,0 +1,54 @@
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+  instance starting 1
+
+Examples:
+
+	msdi1: mmc@4809c000 {
+		compatible = "ti,omap2420-mmc";
+		ti,hwmods = "msdi1";
+		reg = <0x4809c000 0x80>;
+		interrupts = <83>;
+		dmas = <&sdma 61 &sdma 62>;
+		dma-names = "tx", "rx";
+	};
+
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+  instance starting 1
+
+Examples:
+
+	msdi1: mmc@4809c000 {
+		compatible = "ti,omap2420-mmc";
+		ti,hwmods = "msdi1";
+		reg = <0x4809c000 0x80>;
+		interrupts = <83>;
+		dmas = <&sdma 61 &sdma 62>;
+		dma-names = "tx", "rx";
+	};
+

Documentation/devicetree/bindings/net/davinci_emac.txt

@@ -4,7 +4,7 @@ This file provides information, what the device node
 for the davinci_emac interface contains.
 
 Required properties:
-- compatible: "ti,davinci-dm6467-emac";
+- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac"
 - reg: Offset and length of the register set for the device
 - ti,davinci-ctrl-reg-offset: offset to control register
 - ti,davinci-ctrl-mod-reg-offset: offset to control module register

Documentation/devicetree/bindings/net/fsl-fec.txt

@@ -15,6 +15,7 @@ Optional properties:
   only if property "phy-reset-gpios" is available.  Missing the property
   will have the duration be 1 millisecond.  Numbers greater than 1000 are
   invalid and 1 millisecond will be used instead.
+- phy-supply: regulator that powers the Ethernet PHY.
 
 Example:
 
@@ -25,4 +26,5 @@ ethernet@83fec000 {
 	phy-mode = "mii";
 	phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
 	local-mac-address = [00 04 9F 01 1B B9];
+	phy-supply = <&reg_fec_supply>;
 };

Documentation/devicetree/bindings/net/smsc-lan91c111.txt

@@ -8,3 +8,7 @@ Required properties:
 Optional properties:
 - phy-device : phandle to Ethernet phy
 - local-mac-address : Ethernet mac address to use
+- reg-io-width : Mask of sizes (in bytes) of the IO accesses that
+  are supported on the device.  Valid value for SMSC LAN91c111 are
+  1, 2 or 4.  If it's omitted or invalid, the size would be 2 meaning
+  16-bit access only.

Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt

@@ -1,5 +0,0 @@
-NVIDIA Tegra 2 SPI device
-
-Required properties:
-- compatible : should be "nvidia,tegra20-spi".
-- gpios : should specify GPIOs used for chipselect.

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -32,12 +32,14 @@ est	ESTeem Wireless Modems
 fsl	Freescale Semiconductor
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+gmt	Global Mixed-mode Technology, Inc.
 hisilicon	Hisilicon Limited.
 hp	Hewlett Packard
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
 img	Imagination Technologies Ltd.
 intercontrol	Inter Control Group
+lg	LG Corporation
 linux	Linux-specific binding
 lsi	LSI Corp. (LSI Logic)
 marvell	Marvell Technology Group Ltd.

Documentation/gpio/00-INDEX

@@ -0,0 +1,14 @@
+00-INDEX
+	- This file
+gpio.txt
+	- Introduction to GPIOs and their kernel interfaces
+consumer.txt
+	- How to obtain and use GPIOs in a driver
+driver.txt
+	- How to write a GPIO driver
+board.txt
+	- How to assign GPIOs to a consumer device and a function
+sysfs.txt
+	- Information about the GPIO sysfs interface
+gpio-legacy.txt
+	- Historical documentation of the deprecated GPIO integer interface

Documentation/mic/mpssd/mpssd.c

@@ -313,7 +313,7 @@ static struct mic_device_desc *get_device_desc(struct mic_info *mic, int type)
 	int i;
 	void *dp = get_dp(mic, type);
 
-	for (i = mic_aligned_size(struct mic_bootparam); i < PAGE_SIZE;
+	for (i = sizeof(struct mic_bootparam); i < PAGE_SIZE;
 		i += mic_total_desc_size(d)) {
 		d = dp + i;
 
@@ -445,8 +445,8 @@ init_vr(struct mic_info *mic, int fd, int type,
 		__func__, mic->name, vr0->va, vr0->info, vr_size,
 		vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
 	mpsslog("magic 0x%x expected 0x%x\n",
-		vr0->info->magic, MIC_MAGIC + type);
-	assert(vr0->info->magic == MIC_MAGIC + type);
+		le32toh(vr0->info->magic), MIC_MAGIC + type);
+	assert(le32toh(vr0->info->magic) == MIC_MAGIC + type);
 	if (vr1) {
 		vr1->va = (struct mic_vring *)
 			&va[MIC_DEVICE_PAGE_END + vr_size];
@@ -458,8 +458,8 @@ init_vr(struct mic_info *mic, int fd, int type,
 			__func__, mic->name, vr1->va, vr1->info, vr_size,
 			vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
 		mpsslog("magic 0x%x expected 0x%x\n",
-			vr1->info->magic, MIC_MAGIC + type + 1);
-		assert(vr1->info->magic == MIC_MAGIC + type + 1);
+			le32toh(vr1->info->magic), MIC_MAGIC + type + 1);
+		assert(le32toh(vr1->info->magic) == MIC_MAGIC + type + 1);
 	}
 done:
 	return va;
@@ -520,7 +520,7 @@ static void *
 virtio_net(void *arg)
 {
 	static __u8 vnet_hdr[2][sizeof(struct virtio_net_hdr)];
-	static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __aligned(64);
+	static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __attribute__ ((aligned(64)));
 	struct iovec vnet_iov[2][2] = {
 		{ { .iov_base = vnet_hdr[0], .iov_len = sizeof(vnet_hdr[0]) },
 		  { .iov_base = vnet_buf[0], .iov_len = sizeof(vnet_buf[0]) } },
@@ -1412,6 +1412,12 @@ mic_config(void *arg)
 	}
 
 	do {
+		ret = lseek(fd, 0, SEEK_SET);
+		if (ret < 0) {
+			mpsslog("%s: Failed to seek to file start '%s': %s\n",
+				mic->name, pathname, strerror(errno));
+			goto close_error1;
+		}
 		ret = read(fd, value, sizeof(value));
 		if (ret < 0) {
 			mpsslog("%s: Failed to read sysfs entry '%s': %s\n",

Documentation/networking/packet_mmap.txt

@@ -123,6 +123,16 @@ Transmission process is similar to capture as shown below.
 [shutdown]  close() --------> destruction of the transmission socket and
                               deallocation of all associated resources.
 
+Socket creation and destruction is also straight forward, and is done
+the same way as in capturing described in the previous paragraph:
+
+ int fd = socket(PF_PACKET, mode, 0);
+
+The protocol can optionally be 0 in case we only want to transmit
+via this socket, which avoids an expensive call to packet_rcv().
+In this case, you also need to bind(2) the TX_RING with sll_protocol = 0
+set. Otherwise, htons(ETH_P_ALL) or any other protocol, for example.
+
 Binding the socket to your network interface is mandatory (with zero copy) to
 know the header size of frames used in the circular buffer.
 

MAINTAINERS

@@ -893,20 +893,15 @@ F:	arch/arm/include/asm/hardware/dec21285.h
 F:	arch/arm/mach-footbridge/
 
 ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
+M:	Shawn Guo <shawn.guo@linaro.org>
 M:	Sascha Hauer <kernel@pengutronix.de>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://git.pengutronix.de/git/imx/linux-2.6.git
+T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
 F:	arch/arm/mach-imx/
+F:	arch/arm/boot/dts/imx*
 F:	arch/arm/configs/imx*_defconfig
 
-ARM/FREESCALE IMX6
-M:	Shawn Guo <shawn.guo@linaro.org>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
-F:	arch/arm/mach-imx/*imx6*
-
 ARM/FREESCALE MXS ARM ARCHITECTURE
 M:	Shawn Guo <shawn.guo@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1934,7 +1929,8 @@ S:	Maintained
 F:	drivers/gpio/gpio-bt8xx.c
 
 BTRFS FILE SYSTEM
-M:	Chris Mason <chris.mason@fusionio.com>
+M:	Chris Mason <clm@fb.com>
+M:	Josef Bacik <jbacik@fb.com>
 L:	linux-btrfs@vger.kernel.org
 W:	http://btrfs.wiki.kernel.org/
 Q:	http://patchwork.kernel.org/project/linux-btrfs/list/
@@ -2137,7 +2133,8 @@ S:	Maintained
 F:	Documentation/zh_CN/
 
 CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER
-M:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+M:	Peter Chen <Peter.Chen@freescale.com>
+T:	git://github.com/hzpeterchen/linux-usb.git
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/chipidea/
@@ -4043,12 +4040,26 @@ W:	http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
 S:	Maintained
 F:	fs/hpfs/
 
+HSI SUBSYSTEM
+M:	Sebastian Reichel <sre@debian.org>
+S:	Maintained
+F:	Documentation/ABI/testing/sysfs-bus-hsi
+F:	drivers/hsi/
+F:	include/linux/hsi/
+F:	include/uapi/linux/hsi/
+
 HSO 3G MODEM DRIVER
 M:	Jan Dumon <j.dumon@option.com>
 W:	http://www.pharscape.org
 S:	Maintained
 F:	drivers/net/usb/hso.c
 
+HSR NETWORK PROTOCOL
+M:	Arvid Brodin <arvid.brodin@alten.se>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	net/hsr/
+
 HTCPEN TOUCHSCREEN DRIVER
 M:	Pau Oliva Fora <pof@eslack.org>
 L:	linux-input@vger.kernel.org
@@ -4455,10 +4466,8 @@ M:	Bruce Allan <bruce.w.allan@intel.com>
 M:	Carolyn Wyborny <carolyn.wyborny@intel.com>
 M:	Don Skidmore <donald.c.skidmore@intel.com>
 M:	Greg Rose <gregory.v.rose@intel.com>
-M:	Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
 M:	Alex Duyck <alexander.h.duyck@intel.com>
 M:	John Ronciak <john.ronciak@intel.com>
-M:	Tushar Dave <tushar.n.dave@intel.com>
 L:	e1000-devel@lists.sourceforge.net
 W:	http://www.intel.com/support/feedback.htm
 W:	http://e1000.sourceforge.net/
@@ -5261,7 +5270,7 @@ S:	Maintained
 F:	Documentation/lockdep*.txt
 F:	Documentation/lockstat.txt
 F:	include/linux/lockdep.h
-F:	kernel/lockdep*
+F:	kernel/locking/
 
 LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
 M:	"Richard Russon (FlatCap)" <ldm@flatcap.org>
@@ -5973,10 +5982,10 @@ F:	drivers/nfc/
 F:	include/linux/platform_data/pn544.h
 
 NFS, SUNRPC, AND LOCKD CLIENTS
-M:	Trond Myklebust <Trond.Myklebust@netapp.com>
+M:	Trond Myklebust <trond.myklebust@primarydata.com>
 L:	linux-nfs@vger.kernel.org
 W:	http://client.linux-nfs.org
-T:	git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
+T:	git git://git.linux-nfs.org/projects/trondmy/linux-nfs.git
 S:	Maintained
 F:	fs/lockd/
 F:	fs/nfs/
@@ -6243,8 +6252,8 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
 M:	Rob Herring <rob.herring@calxeda.com>
 M:	Pawel Moll <pawel.moll@arm.com>
 M:	Mark Rutland <mark.rutland@arm.com>
-M:	Stephen Warren <swarren@wwwdotorg.org>
 M:	Ian Campbell <ijc+devicetree@hellion.org.uk>
+M:	Kumar Gala <galak@codeaurora.org>
 L:	devicetree@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/
@@ -6454,19 +6463,52 @@ F:	drivers/pci/
 F:	include/linux/pci*
 F:	arch/x86/pci/
 
+PCI DRIVER FOR IMX6
+M:	Richard Zhu <r65037@freescale.com>
+M:	Shawn Guo <shawn.guo@linaro.org>
+L:	linux-pci@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	drivers/pci/host/*imx6*
+
+PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
+M:	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+M:	Jason Cooper <jason@lakedaemon.net>
+L:	linux-pci@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	drivers/pci/host/*mvebu*
+
 PCI DRIVER FOR NVIDIA TEGRA
 M:	Thierry Reding <thierry.reding@gmail.com>
 L:	linux-tegra@vger.kernel.org
+L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
 F:	drivers/pci/host/pci-tegra.c
 
+PCI DRIVER FOR RENESAS R-CAR
+M:	Simon Horman <horms@verge.net.au>
+L:	linux-pci@vger.kernel.org
+L:	linux-sh@vger.kernel.org
+S:	Maintained
+F:	drivers/pci/host/*rcar*
+
 PCI DRIVER FOR SAMSUNG EXYNOS
 M:	Jingoo Han <jg1.han@samsung.com>
 L:	linux-pci@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/pci/host/pci-exynos.c
 
+PCI DRIVER FOR SYNOPSIS DESIGNWARE
+M:	Mohit Kumar <mohit.kumar@st.com>
+M:	Jingoo Han <jg1.han@samsung.com>
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	drivers/pci/host/*designware*
+
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
 L:	linux-pcmcia@lists.infradead.org
@@ -7385,7 +7427,6 @@ S:	Maintained
 F:	kernel/sched/
 F:	include/linux/sched.h
 F:	include/uapi/linux/sched.h
-F:	kernel/wait.c
 F:	include/linux/wait.h
 
 SCORE ARCHITECTURE

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 13
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
 NAME = One Giant Leap for Frogkind
 
 # *DOCUMENTATION*

arch/arc/Kconfig

@@ -8,6 +8,7 @@
 
 config ARC
 	def_bool y
+	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
 	select DEVTMPFS if !INITRAMFS_SOURCE=""

arch/arc/include/uapi/asm/unistd.h

@@ -8,6 +8,9 @@
 
 /******** no-legacy-syscalls-ABI *******/
 
+#ifndef _UAPI_ASM_ARC_UNISTD_H
+#define _UAPI_ASM_ARC_UNISTD_H
+
 #define __ARCH_WANT_SYS_EXECVE
 #define __ARCH_WANT_SYS_CLONE
 #define __ARCH_WANT_SYS_VFORK
@@ -32,3 +35,5 @@ __SYSCALL(__NR_arc_gettls, sys_arc_gettls)
 /* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */
 #define __NR_sysfs		(__NR_arch_specific_syscall + 3)
 __SYSCALL(__NR_sysfs, sys_sysfs)
+
+#endif

arch/arc/kernel/perf_event.c

@@ -79,9 +79,9 @@ static int arc_pmu_cache_event(u64 config)
 	cache_result	= (config >> 16) & 0xff;
 	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
 		return -EINVAL;
-	if (cache_type >= PERF_COUNT_HW_CACHE_OP_MAX)
+	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
 		return -EINVAL;
-	if (cache_type >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
 		return -EINVAL;
 
 	ret = arc_pmu_cache_map[cache_type][cache_op][cache_result];

arch/arm/boot/dts/am335x-base0033.dts

@@ -13,4 +13,83 @@
 / {
 	model = "IGEP COM AM335x on AQUILA Expansion";
 	compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
+
+	hdmi {
+		compatible = "ti,tilcdc,slave";
+		i2c = <&i2c0>;
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_pins>;
+		pinctrl-1 = <&nxp_hdmi_off_pins>;
+		status = "okay";
+	};
+
+	leds_base {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_base_pins>;
+
+		compatible = "gpio-leds";
+
+		led@0 {
+			label = "base:red:user";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;	/* gpio1_21 */
+			default-state = "off";
+		};
+
+		led@1 {
+			label = "base:green:user";
+			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;	/* gpio2_0 */
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0 */
+			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1 */
+			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2 */
+			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3 */
+			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4 */
+			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5 */
+			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6 */
+			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7 */
+			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8 */
+			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9 */
+			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10 */
+			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11 */
+			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12 */
+			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13 */
+			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14 */
+			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15 */
+			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync */
+			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync */
+			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk */
+			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en */
+		>;
+	};
+	nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+		>;
+	};
+
+	leds_base_pins: pinmux_leds_base_pins {
+		pinctrl-single,pins = <
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&i2c0 {
+	eeprom: eeprom@50 {
+		compatible = "at,24c256";
+		reg = <0x50>;
+	};
 };

arch/arm/boot/dts/am335x-igep0033.dtsi

@@ -199,6 +199,35 @@
 	pinctrl-0 = <&uart0_pins>;
 };
 
+&usb {
+	status = "okay";
+
+	control@44e10000 {
+		status = "okay";
+	};
+
+	usb-phy@47401300 {
+		status = "okay";
+	};
+
+	usb-phy@47401b00 {
+		status = "okay";
+	};
+
+	usb@47401000 {
+		status = "okay";
+	};
+
+	usb@47401800 {
+		status = "okay";
+		dr_mode = "host";
+	};
+
+	dma-controller@07402000  {
+		status = "okay";
+	};
+};
+
 #include "tps65910.dtsi"
 
 &tps {

arch/arm/boot/dts/am3517-evm.dts

@@ -7,11 +7,11 @@
  */
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "am3517.dtsi"
 
 / {
-	model = "TI AM3517 EVM (AM3517/05)";
-	compatible = "ti,am3517-evm", "ti,omap3";
+	model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
+	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
 
 	memory {
 		device_type = "memory";

arch/arm/boot/dts/am3517.dtsi

@@ -0,0 +1,63 @@
+/*
+ * Device Tree Source for am3517 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap3.dtsi"
+
+/ {
+	aliases {
+		serial3 = &uart4;
+	};
+
+	ocp {
+		am35x_otg_hs: am35x_otg_hs@5c040000 {
+			compatible = "ti,omap3-musb";
+			ti,hwmods = "am35x_otg_hs";
+			status = "disabled";
+			reg = <0x5c040000 0x1000>;
+			interrupts = <71>;
+			interrupt-names = "mc";
+		};
+
+		davinci_emac: ethernet@0x5c000000 {
+			compatible = "ti,am3517-emac";
+			ti,hwmods = "davinci_emac";
+			status = "disabled";
+			reg = <0x5c000000 0x30000>;
+			interrupts = <67 68 69 70>;
+			ti,davinci-ctrl-reg-offset = <0x10000>;
+			ti,davinci-ctrl-mod-reg-offset = <0>;
+			ti,davinci-ctrl-ram-offset = <0x20000>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			ti,davinci-rmii-en = /bits/ 8 <1>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+		};
+
+		davinci_mdio: ethernet@0x5c030000 {
+			compatible = "ti,davinci_mdio";
+			ti,hwmods = "davinci_mdio";
+			status = "disabled";
+			reg = <0x5c030000 0x1000>;
+			bus_freq = <1000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart4: serial@4809e000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart4";
+			status = "disabled";
+			reg = <0x4809e000 0x400>;
+			interrupts = <84>;
+			dmas = <&sdma 55 &sdma 54>;
+			dma-names = "tx", "rx";
+			clock-frequency = <48000000>;
+		};
+	};
+};

arch/arm/boot/dts/armada-370-db.dts

@@ -99,22 +99,22 @@
 					spi-max-frequency = <50000000>;
 				};
 			};
+		};
 
-			pcie-controller {
+		pcie-controller {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * both standard PCIe slots and mini-PCIe
+			 * slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
 				status = "okay";
-				/*
-				 * The two PCIe units are accessible through
-				 * both standard PCIe slots and mini-PCIe
-				 * slots on the board.
-				 */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-				pcie@2,0 {
-					/* Port 1, Lane 0 */
-					status = "okay";
-				};
 			};
 		};
 	};

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -118,7 +118,7 @@
 
 			coherency-fabric@20200 {
 				compatible = "marvell,coherency-fabric";
-				reg = <0x20200 0xb0>, <0x21810 0x1c>;
+				reg = <0x20200 0xb0>, <0x21010 0x1c>;
 			};
 
 			serial@12000 {

arch/arm/boot/dts/armada-xp-mv78230.dtsi

@@ -47,7 +47,7 @@
 		/*
 		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
 		 * configured as x4 or quad x1 lanes. One unit is
-		 * x4/x1.
+		 * x1 only.
 		 */
 		pcie-controller {
 			compatible = "marvell,armada-xp-pcie";
@@ -62,10 +62,10 @@
 
 			ranges =
 			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
 				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
 				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
 				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
 				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
 				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
 				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
@@ -74,8 +74,8 @@
 				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
 				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
 				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-				0x82000000 0x9 0       MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0       MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
+				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
 
 			pcie@1,0 {
 				device_type = "pci";
@@ -145,20 +145,20 @@
 				status = "disabled";
 			};
 
-			pcie@9,0 {
+			pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
+				clocks = <&gateclk 9>;
 				status = "disabled";
 			};
 		};

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -48,7 +48,7 @@
 		/*
 		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
 		 * configured as x4 or quad x1 lanes. One unit is
-		 * x4/x1.
+		 * x4 only.
 		 */
 		pcie-controller {
 			compatible = "marvell,armada-xp-pcie";
@@ -68,7 +68,9 @@
 				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
 				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
 				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
 				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
 				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
 				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
@@ -77,10 +79,18 @@
 				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
 				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
 				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-				0x82000000 0x9 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
-				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
 
 			pcie@1,0 {
 				device_type = "pci";
@@ -106,8 +116,8 @@
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
-                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 59>;
 				marvell,pcie-port = <0>;
@@ -150,37 +160,88 @@
 				status = "disabled";
 			};
 
-			pcie@9,0 {
+			pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
+				clocks = <&gateclk 9>;
 				status = "disabled";
 			};
 
-			pcie@10,0 {
+			pcie@6,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
-				reg = <0x5000 0 0 0 0>;
+				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
-					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 103>;
-				marvell,pcie-port = <3>;
+				interrupt-map = <0 0 0 0 &mpic 63>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+
+			pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 64>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 65>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 27>;
+				clocks = <&gateclk 26>;
 				status = "disabled";
 			};
 		};

arch/arm/boot/dts/at91sam9x5_usart3.dtsi

@@ -11,6 +11,10 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	aliases {
+		serial4 = &usart3;
+	};
+
 	ahb {
 		apb {
 			pinctrl@fffff400 {

arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi

@@ -44,8 +44,8 @@
 		gpmc,wr-access-ns = <186>;
 		gpmc,cycle2cycle-samecsen;
 		gpmc,cycle2cycle-diffcsen;
-		vmmc-supply = <&vddvario>;
-		vmmc_aux-supply = <&vdd33a>;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
 		reg-io-width = <4>;
 		smsc,save-mac-address;
 	};

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -215,3 +215,10 @@
 &usbhsehci {
 	phys = <0 &hsusb2_phy>;
 };
+
+&vaux2 {
+	regulator-name = "usb_1v8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};

arch/arm/boot/dts/omap3-beagle.dts

@@ -61,6 +61,14 @@
 		vcc-supply = <&hsusb2_power>;
 	};
 
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3beagle";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 
@@ -120,6 +128,12 @@
 		reg = <0x48>;
 		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
 	};
 };
 
@@ -178,3 +192,10 @@
 	mode = <3>;
 	power = <50>;
 };
+
+&vaux2 {
+	regulator-name = "vdd_ehci";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};

arch/arm/boot/dts/omap3-igep.dtsi

@@ -1,5 +1,5 @@
 /*
- * Device Tree Source for IGEP Technology devices
+ * Common device tree for IGEP boards based on AM/DM37x
  *
  * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -10,7 +10,7 @@
  */
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "omap36xx.dtsi"
 
 / {
 	memory {
@@ -24,6 +24,25 @@
 		ti,mcbsp = <&mcbsp2>;
 		ti,codec = <&twl_audio>;
 	};
+
+	vdd33: regulator-vdd33 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33";
+		regulator-always-on;
+	};
+
+	lbee1usjyc_vmmc: lbee1usjyc_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&lbee1usjyc_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-lbee1usjyc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* gpio_138 WIFI_PDN */
+		startup-delay-us = <10000>;
+		enable-active-high;
+		vin-supply = <&vdd33>;
+	};
 };
 
 &omap3_pmx_core {
@@ -48,6 +67,15 @@
 		>;
 	};
 
+	/* WiFi/BT combo */
+	lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
+		pinctrl-single,pins = <
+			0x136 (PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 */
+			0x138 (PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 */
+			0x13a (PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 */
+		>;
+	};
+
 	mcbsp2_pins: pinmux_mcbsp2_pins {
 		pinctrl-single,pins = <
 			0x10c (PIN_INPUT | MUX_MODE0)		/* mcbsp2_fsx.mcbsp2_fsx */
@@ -65,10 +93,17 @@
 			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
 			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
 			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-			0x120 (PIN_INPUT | MUX_MODE0)		/* sdmmc1_dat4.sdmmc1_dat4 */
-			0x122 (PIN_INPUT | MUX_MODE0)		/* sdmmc1_dat5.sdmmc1_dat5 */
-			0x124 (PIN_INPUT | MUX_MODE0)		/* sdmmc1_dat6.sdmmc1_dat6 */
-			0x126 (PIN_INPUT | MUX_MODE0)		/* sdmmc1_dat7.sdmmc1_dat7 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0.sdmmc2_dat0 */
+			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
 		>;
 	};
 
@@ -78,10 +113,33 @@
 		>;
 	};
 
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x18a (PIN_INPUT | MUX_MODE0)   /* i2c1_scl.i2c1_scl */
+			0x18c (PIN_INPUT | MUX_MODE0)   /* i2c1_sda.i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			0x18e (PIN_INPUT | MUX_MODE0)   /* i2c2_scl.i2c2_scl */
+			0x190 (PIN_INPUT | MUX_MODE0)   /* i2c2_sda.i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			0x192 (PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
+			0x194 (PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
+		>;
+	};
+
 	leds_pins: pinmux_leds_pins { };
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <2600000>;
 
 	twl: twl@48 {
@@ -101,9 +159,16 @@
 #include "twl4030_omap3.dtsi"
 
 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
 };
 
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
+
 &mcbsp2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcbsp2_pins>;
@@ -114,11 +179,15 @@
       pinctrl-0 = <&mmc1_pins>;
       vmmc-supply = <&vmmc1>;
       vmmc_aux-supply = <&vsim>;
-      bus-width = <8>;
+      bus-width = <4>;
 };
 
 &mmc2 {
-	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&lbee1usjyc_vmmc>;
+	bus-width = <4>;
+	non-removable;
 };
 
 &mmc3 {

arch/arm/boot/dts/omap3-igep0020.dts

@@ -1,5 +1,5 @@
 /*
- * Device Tree Source for IGEPv2 board
+ * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x)
  *
  * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -13,7 +13,7 @@
 #include "omap-gpmc-smsc911x.dtsi"
 
 / {
-	model = "IGEPv2";
+	model = "IGEPv2 (TI OMAP AM/DM37x)";
 	compatible = "isee,omap3-igep0020", "ti,omap3";
 
 	leds {
@@ -67,6 +67,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <
 		&hsusbb1_pins
+		&tfp410_pins
+		&dss_pins
 	>;
 
 	hsusbb1_pins: pinmux_hsusbb1_pins {
@@ -85,6 +87,45 @@
 			0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
 		>;
 	};
+
+	tfp410_pins: tfp410_dvi_pins {
+		pinctrl-single,pins = <
+			0x196 (PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
+		>;
+	};
+
+	dss_pins: pinmux_dss_dvi_pins {
+		pinctrl-single,pins = <
+			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+		>;
+	};
 };
 
 &leds_pins {
@@ -174,3 +215,8 @@
 &usbhsehci {
 	phys = <&hsusb1_phy>;
 };
+
+&vpll2 {
+        /* Needed for DSS */
+        regulator-name = "vdds_dsi";
+};

arch/arm/boot/dts/omap3-igep0030.dts

@@ -1,5 +1,5 @@
 /*
- * Device Tree Source for IGEP COM Module
+ * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x)
  *
  * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -12,7 +12,7 @@
 #include "omap3-igep.dtsi"
 
 / {
-	model = "IGEP COM Module";
+	model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
 	compatible = "isee,omap3-igep0030", "ti,omap3";
 
 	leds {

arch/arm/boot/dts/omap3-n900.dts

@@ -9,7 +9,7 @@
 
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "omap34xx-hs.dtsi"
 
 / {
 	model = "Nokia N900";
@@ -125,6 +125,21 @@
 		>;
 	};
 
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
+			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
+			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
+			0x136 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
+			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
+			0x13a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
+		>;
+	};
+
 	display_pins: pinmux_display_pins {
 		pinctrl-single,pins = <
 			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
@@ -358,8 +373,14 @@
 	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
 };
 
+/* most boards use vaux3, only some old versions use vmmc2 instead */
 &mmc2 {
-	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vaux3>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+	non-removable;
 };
 
 &mmc3 {

arch/arm/boot/dts/omap3-n950-n9.dtsi

@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 
-#include "omap36xx.dtsi"
+#include "omap36xx-hs.dtsi"
 
 / {
 	cpus {

arch/arm/boot/dts/omap3.dtsi

@@ -82,6 +82,13 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		aes: aes@480c5000 {
+			compatible = "ti,omap3-aes";
+			ti,hwmods = "aes";
+			reg = <0x480c5000 0x50>;
+			interrupts = <0>;
+		};
+
 		counter32k: counter@48320000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x48320000 0x20>;
@@ -260,6 +267,13 @@
 			ti,hwmods = "i2c3";
 		};
 
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap3-mailbox";
+			ti,hwmods = "mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>;
+		};
+
 		mcspi1: spi@48098000 {
 			compatible = "ti,omap2-mcspi";
 			reg = <0x48098000 0x100>;
@@ -357,6 +371,13 @@
 			dma-names = "tx", "rx";
 		};
 
+		mmu_isp: mmu@480bd400 {
+			compatible = "ti,omap3-mmu-isp";
+			ti,hwmods = "mmu_isp";
+			reg = <0x480bd400 0x80>;
+			interrupts = <8>;
+		};
+
 		wdt2: wdt@48314000 {
 			compatible = "ti,omap3-wdt";
 			reg = <0x48314000 0x80>;
@@ -442,6 +463,27 @@
 			dma-names = "tx", "rx";
 		};
 
+		sham: sham@480c3000 {
+			compatible = "ti,omap3-sham";
+			ti,hwmods = "sham";
+			reg = <0x480c3000 0x64>;
+			interrupts = <49>;
+		};
+
+		smartreflex_core: smartreflex@480cb000 {
+			compatible = "ti,omap3-smartreflex-core";
+			ti,hwmods = "smartreflex_core";
+			reg = <0x480cb000 0x400>;
+			interrupts = <19>;
+		};
+
+		smartreflex_mpu_iva: smartreflex@480c9000 {
+			compatible = "ti,omap3-smartreflex-iva";
+			ti,hwmods = "smartreflex_mpu_iva";
+			reg = <0x480c9000 0x400>;
+			interrupts = <18>;
+		};
+
 		timer1: timer@48318000 {
 			compatible = "ti,omap3430-timer";
 			reg = <0x48318000 0x400>;

arch/arm/boot/dts/omap34xx-hs.dtsi

@@ -0,0 +1,16 @@
+/* Disabled modules for secure omaps */
+
+#include "omap34xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes {
+	status = "disabled";
+};
+
+&sham {
+	status = "disabled";
+};
+
+&timer12 {
+	status = "disabled";
+};

arch/arm/boot/dts/omap36xx-hs.dtsi

@@ -0,0 +1,16 @@
+/* Disabled modules for secure omaps */
+
+#include "omap36xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes {
+	status = "disabled";
+};
+
+&sham {
+	status = "disabled";
+};
+
+&timer12 {
+	status = "disabled";
+};

arch/arm/boot/dts/omap4-panda-common.dtsi

@@ -246,15 +246,6 @@
 			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
-};
-
-&omap4_pmx_wkup {
-	led_wkgpio_pins: pinmux_leds_wkpins {
-		pinctrl-single,pins = <
-			0x1a (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
-			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
-		>;
-	};
 
 	/*
 	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
@@ -274,7 +265,7 @@
 		pinctrl-single,pins = <
 			0x38 (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
 			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			0x108 (PIN_OUTPUT | MUX_MODE0)		/* sdmmc5_clk.sdmmc5_clk */
+			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
 			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
 			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
 			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
@@ -284,6 +275,15 @@
 	};
 };
 
+&omap4_pmx_wkup {
+	led_wkgpio_pins: pinmux_leds_wkpins {
+		pinctrl-single,pins = <
+			0x1a (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
+			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
+		>;
+	};
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;

arch/arm/boot/dts/omap4-sdp.dts

@@ -300,12 +300,12 @@
 	wl12xx_pins: pinmux_wl12xx_pins {
 		pinctrl-single,pins = <
 			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			0x108 (PIN_OUTPUT | MUX_MODE3)		/* sdmmc5_clk.sdmmc5_clk */
-			0x10a (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_cmd.sdmmc5_cmd */
-			0x10c (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			0x10e (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			0x112 (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat3.sdmmc5_dat3 */
+			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
 		>;
 	};
 };

arch/arm/boot/dts/socfpga.dtsi

@@ -245,14 +245,14 @@
 
 					mpu_periph_clk: mpu_periph_clk {
 						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
+						compatible = "altr,socfpga-perip-clk";
 						clocks = <&mpuclk>;
 						fixed-divider = <4>;
 					};
 
 					mpu_l2_ram_clk: mpu_l2_ram_clk {
 						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
+						compatible = "altr,socfpga-perip-clk";
 						clocks = <&mpuclk>;
 						fixed-divider = <2>;
 					};
@@ -266,8 +266,9 @@
 
 					l3_main_clk: l3_main_clk {
 						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
+						compatible = "altr,socfpga-perip-clk";
 						clocks = <&mainclk>;
+						fixed-divider = <1>;
 					};
 
 					l3_mp_clk: l3_mp_clk {

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -193,7 +193,10 @@
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun6i-a31-pinctrl";
 			reg = <0x01c20800 0x400>;
-			interrupts = <0 11 1>, <0 15 1>, <0 16 1>, <0 17 1>;
+			interrupts = <0 11 4>,
+				     <0 15 4>,
+				     <0 16 4>,
+				     <0 17 4>;
 			clocks = <&apb1_gates 5>;
 			gpio-controller;
 			interrupt-controller;
@@ -212,11 +215,11 @@
 		timer@01c20c00 {
 			compatible = "allwinner,sun4i-timer";
 			reg = <0x01c20c00 0xa0>;
-			interrupts = <0 18 1>,
-				     <0 19 1>,
-				     <0 20 1>,
-				     <0 21 1>,
-				     <0 22 1>;
+			interrupts = <0 18 4>,
+				     <0 19 4>,
+				     <0 20 4>,
+				     <0 21 4>,
+				     <0 22 4>;
 			clocks = <&osc24M>;
 		};
 
@@ -228,7 +231,7 @@
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
-			interrupts = <0 0 1>;
+			interrupts = <0 0 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 16>;
@@ -238,7 +241,7 @@
 		uart1: serial@01c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
-			interrupts = <0 1 1>;
+			interrupts = <0 1 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 17>;
@@ -248,7 +251,7 @@
 		uart2: serial@01c28800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28800 0x400>;
-			interrupts = <0 2 1>;
+			interrupts = <0 2 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 18>;
@@ -258,7 +261,7 @@
 		uart3: serial@01c28c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28c00 0x400>;
-			interrupts = <0 3 1>;
+			interrupts = <0 3 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 19>;
@@ -268,7 +271,7 @@
 		uart4: serial@01c29000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29000 0x400>;
-			interrupts = <0 4 1>;
+			interrupts = <0 4 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 20>;
@@ -278,7 +281,7 @@
 		uart5: serial@01c29400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29400 0x400>;
-			interrupts = <0 5 1>;
+			interrupts = <0 5 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 21>;

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -170,7 +170,7 @@
 		emac: ethernet@01c0b000 {
 			compatible = "allwinner,sun4i-emac";
 			reg = <0x01c0b000 0x1000>;
-			interrupts = <0 55 1>;
+			interrupts = <0 55 4>;
 			clocks = <&ahb_gates 17>;
 			status = "disabled";
 		};
@@ -186,7 +186,7 @@
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun7i-a20-pinctrl";
 			reg = <0x01c20800 0x400>;
-			interrupts = <0 28 1>;
+			interrupts = <0 28 4>;
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
@@ -251,12 +251,12 @@
 		timer@01c20c00 {
 			compatible = "allwinner,sun4i-timer";
 			reg = <0x01c20c00 0x90>;
-			interrupts = <0 22 1>,
-				     <0 23 1>,
-				     <0 24 1>,
-				     <0 25 1>,
-				     <0 67 1>,
-				     <0 68 1>;
+			interrupts = <0 22 4>,
+				     <0 23 4>,
+				     <0 24 4>,
+				     <0 25 4>,
+				     <0 67 4>,
+				     <0 68 4>;
 			clocks = <&osc24M>;
 		};
 
@@ -273,7 +273,7 @@
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
-			interrupts = <0 1 1>;
+			interrupts = <0 1 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 16>;
@@ -283,7 +283,7 @@
 		uart1: serial@01c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
-			interrupts = <0 2 1>;
+			interrupts = <0 2 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 17>;
@@ -293,7 +293,7 @@
 		uart2: serial@01c28800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28800 0x400>;
-			interrupts = <0 3 1>;
+			interrupts = <0 3 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 18>;
@@ -303,7 +303,7 @@
 		uart3: serial@01c28c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28c00 0x400>;
-			interrupts = <0 4 1>;
+			interrupts = <0 4 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 19>;
@@ -313,7 +313,7 @@
 		uart4: serial@01c29000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29000 0x400>;
-			interrupts = <0 17 1>;
+			interrupts = <0 17 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 20>;
@@ -323,7 +323,7 @@
 		uart5: serial@01c29400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29400 0x400>;
-			interrupts = <0 18 1>;
+			interrupts = <0 18 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 21>;
@@ -333,7 +333,7 @@
 		uart6: serial@01c29800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29800 0x400>;
-			interrupts = <0 19 1>;
+			interrupts = <0 19 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 22>;
@@ -343,7 +343,7 @@
 		uart7: serial@01c29c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29c00 0x400>;
-			interrupts = <0 20 1>;
+			interrupts = <0 20 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 23>;
@@ -353,7 +353,7 @@
 		i2c0: i2c@01c2ac00 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2ac00 0x400>;
-			interrupts = <0 7 1>;
+			interrupts = <0 7 4>;
 			clocks = <&apb1_gates 0>;
 			clock-frequency = <100000>;
 			status = "disabled";
@@ -362,7 +362,7 @@
 		i2c1: i2c@01c2b000 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2b000 0x400>;
-			interrupts = <0 8 1>;
+			interrupts = <0 8 4>;
 			clocks = <&apb1_gates 1>;
 			clock-frequency = <100000>;
 			status = "disabled";
@@ -371,7 +371,7 @@
 		i2c2: i2c@01c2b400 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2b400 0x400>;
-			interrupts = <0 9 1>;
+			interrupts = <0 9 4>;
 			clocks = <&apb1_gates 2>;
 			clock-frequency = <100000>;
 			status = "disabled";
@@ -380,7 +380,7 @@
 		i2c3: i2c@01c2b800 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2b800 0x400>;
-			interrupts = <0 88 1>;
+			interrupts = <0 88 4>;
 			clocks = <&apb1_gates 3>;
 			clock-frequency = <100000>;
 			status = "disabled";
@@ -389,7 +389,7 @@
 		i2c4: i2c@01c2bc00 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2bc00 0x400>;
-			interrupts = <0 89 1>;
+			interrupts = <0 89 4>;
 			clocks = <&apb1_gates 15>;
 			clock-frequency = <100000>;
 			status = "disabled";

arch/arm/configs/multi_v7_defconfig

@@ -69,6 +69,7 @@ CONFIG_KS8851=y
 CONFIG_SMSC911X=y
 CONFIG_STMMAC_ETH=y
 CONFIG_MDIO_SUN4I=y
+CONFIG_TI_CPSW=y
 CONFIG_KEYBOARD_SPEAR=y
 CONFIG_SERIO_AMBAKMI=y
 CONFIG_SERIAL_8250=y
@@ -133,12 +134,14 @@ CONFIG_USB_GPIO_VBUS=y
 CONFIG_USB_ISP1301=y
 CONFIG_USB_MXS_PHY=y
 CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_MMC_SDHCI_BCM_KONA=y
 CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_EDAC=y

arch/arm/configs/omap2plus_defconfig

@@ -173,6 +173,7 @@ CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TPS65910=y
 CONFIG_TWL6040_CORE=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y

arch/arm/configs/sunxi_defconfig

@@ -12,6 +12,9 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
@@ -58,4 +61,8 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_COMMON_CLK_DEBUG=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
 CONFIG_NLS=y
+CONFIG_PRINTK_TIME=y

arch/arm/configs/u8500_defconfig

@@ -22,6 +22,7 @@ CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
+CONFIG_ARM_U8500_CPUIDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_PM_RUNTIME=y
@@ -109,6 +110,8 @@ CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_MISC_FILESYSTEMS is not set

arch/arm/include/asm/memory.h

@@ -100,23 +100,19 @@
 #define TASK_UNMAPPED_BASE	UL(0x00000000)
 #endif
 
-#ifndef PHYS_OFFSET
-#define PHYS_OFFSET 		UL(CONFIG_DRAM_BASE)
-#endif
-
 #ifndef END_MEM
 #define END_MEM     		(UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
 #endif
 
 #ifndef PAGE_OFFSET
-#define PAGE_OFFSET		(PHYS_OFFSET)
+#define PAGE_OFFSET		PLAT_PHYS_OFFSET
 #endif
 
 /*
  * The module can be at any place in ram in nommu mode.
  */
 #define MODULES_END		(END_MEM)
-#define MODULES_VADDR		(PHYS_OFFSET)
+#define MODULES_VADDR		PAGE_OFFSET
 
 #define XIP_VIRT_ADDR(physaddr)  (physaddr)
 
@@ -157,6 +153,16 @@
 #endif
 #define ARCH_PGD_MASK		((1 << ARCH_PGD_SHIFT) - 1)
 
+/*
+ * PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical
+ * memory.  This is used for XIP and NoMMU kernels, or by kernels which
+ * have their own mach/memory.h.  Assembly code must always use
+ * PLAT_PHYS_OFFSET and not PHYS_OFFSET.
+ */
+#ifndef PLAT_PHYS_OFFSET
+#define PLAT_PHYS_OFFSET	UL(CONFIG_PHYS_OFFSET)
+#endif
+
 #ifndef __ASSEMBLY__
 
 /*
@@ -239,6 +245,8 @@ static inline unsigned long __phys_to_virt(phys_addr_t x)
 
 #else
 
+#define PHYS_OFFSET	PLAT_PHYS_OFFSET
+
 static inline phys_addr_t __virt_to_phys(unsigned long x)
 {
 	return (phys_addr_t)x - PAGE_OFFSET + PHYS_OFFSET;
@@ -251,17 +259,6 @@ static inline unsigned long __phys_to_virt(phys_addr_t x)
 
 #endif
 #endif
-#endif /* __ASSEMBLY__ */
-
-#ifndef PHYS_OFFSET
-#ifdef PLAT_PHYS_OFFSET
-#define PHYS_OFFSET	PLAT_PHYS_OFFSET
-#else
-#define PHYS_OFFSET	UL(CONFIG_PHYS_OFFSET)
-#endif
-#endif
-
-#ifndef __ASSEMBLY__
 
 /*
  * PFNs are used to describe any physical page; this means

arch/arm/include/asm/pgtable.h

@@ -61,7 +61,7 @@ extern void __pgd_error(const char *file, int line, pgd_t);
  * mapping to be mapped at.  This is particularly important for
  * non-high vector CPUs.
  */
-#define FIRST_USER_ADDRESS	PAGE_SIZE
+#define FIRST_USER_ADDRESS	(PAGE_SIZE * 2)
 
 /*
  * Use TASK_SIZE as the ceiling argument for free_pgtables() and

arch/arm/kernel/head-nommu.S

@@ -68,7 +68,7 @@ ENTRY(stext)
 
 #ifdef CONFIG_ARM_MPU
 	/* Calculate the size of a region covering just the kernel */
-	ldr	r5, =PHYS_OFFSET		@ Region start: PHYS_OFFSET
+	ldr	r5, =PLAT_PHYS_OFFSET		@ Region start: PHYS_OFFSET
 	ldr     r6, =(_end)			@ Cover whole kernel
 	sub	r6, r6, r5			@ Minimum size of region to map
 	clz	r6, r6				@ Region size must be 2^N...
@@ -213,7 +213,7 @@ ENTRY(__setup_mpu)
 	set_region_nr r0, #MPU_RAM_REGION
 	isb
 	/* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */
-	ldr	r0, =PHYS_OFFSET		@ RAM starts at PHYS_OFFSET
+	ldr	r0, =PLAT_PHYS_OFFSET		@ RAM starts at PHYS_OFFSET
 	ldr	r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL)
 
 	setup_region r0, r5, r6, MPU_DATA_SIDE	@ PHYS_OFFSET, shared, enabled

arch/arm/kernel/head.S

@@ -110,7 +110,7 @@ ENTRY(stext)
 	sub	r4, r3, r4			@ (PHYS_OFFSET - PAGE_OFFSET)
 	add	r8, r8, r4			@ PHYS_OFFSET
 #else
-	ldr	r8, =PHYS_OFFSET		@ always constant in this case
+	ldr	r8, =PLAT_PHYS_OFFSET		@ always constant in this case
 #endif
 
 	/*

arch/arm/kernel/machine_kexec.c

@@ -14,11 +14,12 @@
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
+#include <asm/fncpy.h>
 #include <asm/mach-types.h>
 #include <asm/smp_plat.h>
 #include <asm/system_misc.h>
 
-extern const unsigned char relocate_new_kernel[];
+extern void relocate_new_kernel(void);
 extern const unsigned int relocate_new_kernel_size;
 
 extern unsigned long kexec_start_address;
@@ -142,6 +143,8 @@ void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list;
 	unsigned long reboot_code_buffer_phys;
+	unsigned long reboot_entry = (unsigned long)relocate_new_kernel;
+	unsigned long reboot_entry_phys;
 	void *reboot_code_buffer;
 
 	/*
@@ -168,16 +171,16 @@ void machine_kexec(struct kimage *image)
 
 
 	/* copy our kernel relocation code to the control code page */
-	memcpy(reboot_code_buffer,
-	       relocate_new_kernel, relocate_new_kernel_size);
+	reboot_entry = fncpy(reboot_code_buffer,
+			     reboot_entry,
+			     relocate_new_kernel_size);
+	reboot_entry_phys = (unsigned long)reboot_entry +
+		(reboot_code_buffer_phys - (unsigned long)reboot_code_buffer);
 
-
-	flush_icache_range((unsigned long) reboot_code_buffer,
-			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
 	if (kexec_reinit)
 		kexec_reinit();
 
-	soft_restart(reboot_code_buffer_phys);
+	soft_restart(reboot_entry_phys);
 }

arch/arm/kernel/process.c

@@ -404,6 +404,7 @@ EXPORT_SYMBOL(dump_fpu);
 unsigned long get_wchan(struct task_struct *p)
 {
 	struct stackframe frame;
+	unsigned long stack_page;
 	int count = 0;
 	if (!p || p == current || p->state == TASK_RUNNING)
 		return 0;
@@ -412,9 +413,11 @@ unsigned long get_wchan(struct task_struct *p)
 	frame.sp = thread_saved_sp(p);
 	frame.lr = 0;			/* recovered from the stack */
 	frame.pc = thread_saved_pc(p);
+	stack_page = (unsigned long)task_stack_page(p);
 	do {
-		int ret = unwind_frame(&frame);
-		if (ret < 0)
+		if (frame.sp < stack_page ||
+		    frame.sp >= stack_page + THREAD_SIZE ||
+		    unwind_frame(&frame) < 0)
 			return 0;
 		if (!in_sched_functions(frame.pc))
 			return frame.pc;

arch/arm/kernel/relocate_kernel.S

@@ -2,10 +2,12 @@
  * relocate_kernel.S - put the kernel image in place to boot
  */
 
+#include <linux/linkage.h>
 #include <asm/kexec.h>
 
-	.globl relocate_new_kernel
-relocate_new_kernel:
+	.align	3	/* not needed for this code, but keeps fncpy() happy */
+
+ENTRY(relocate_new_kernel)
 
 	ldr	r0,kexec_indirection_page
 	ldr	r1,kexec_start_address
@@ -79,6 +81,8 @@ kexec_mach_type:
 kexec_boot_atags:
 	.long	0x0
 
+ENDPROC(relocate_new_kernel)
+
 relocate_new_kernel_end:
 
 	.globl relocate_new_kernel_size

arch/arm/kernel/setup.c

@@ -873,8 +873,6 @@ void __init setup_arch(char **cmdline_p)
 	machine_desc = mdesc;
 	machine_name = mdesc->name;
 
-	setup_dma_zone(mdesc);
-
 	if (mdesc->reboot_mode != REBOOT_HARD)
 		reboot_mode = mdesc->reboot_mode;
 
@@ -892,6 +890,7 @@ void __init setup_arch(char **cmdline_p)
 	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
 
 	early_paging_init(mdesc, lookup_processor_type(read_cpuid_id()));
+	setup_dma_zone(mdesc);
 	sanity_check_meminfo();
 	arm_memblock_init(&meminfo, mdesc);
 

arch/arm/kernel/sigreturn_codes.S

@@ -30,6 +30,27 @@
  * snippets.
  */
 
+/*
+ * In CPU_THUMBONLY case kernel arm opcodes are not allowed.
+ * Note in this case codes skips those instructions but it uses .org
+ * directive to keep correct layout of sigreturn_codes array.
+ */
+#ifndef CONFIG_CPU_THUMBONLY
+#define ARM_OK(code...)	code
+#else
+#define ARM_OK(code...)
+#endif
+
+	.macro arm_slot n
+	.org	sigreturn_codes + 12 * (\n)
+ARM_OK(	.arm	)
+	.endm
+
+	.macro thumb_slot n
+	.org	sigreturn_codes + 12 * (\n) + 8
+	.thumb
+	.endm
+
 #if __LINUX_ARM_ARCH__ <= 4
 	/*
 	 * Note we manually set minimally required arch that supports
@@ -45,26 +66,27 @@
 	.global sigreturn_codes
 	.type	sigreturn_codes, #object
 
-	.arm
+	.align
 
 sigreturn_codes:
 
 	/* ARM sigreturn syscall code snippet */
-	mov	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
-	swi	#(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)
+	arm_slot 0
+ARM_OK(	mov	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)	)
+ARM_OK(	swi	#(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)	)
 
 	/* Thumb sigreturn syscall code snippet */
-	.thumb
+	thumb_slot 0
 	movs	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
 	swi	#0
 
 	/* ARM sigreturn_rt syscall code snippet */
-	.arm
-	mov	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
-	swi	#(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)
+	arm_slot 1
+ARM_OK(	mov	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)	)
+ARM_OK(	swi	#(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)	)
 
 	/* Thumb sigreturn_rt syscall code snippet */
-	.thumb
+	thumb_slot 1
 	movs	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
 	swi	#0
 
@@ -74,7 +96,7 @@ sigreturn_codes:
 	 * it is thumb case or not, so we need additional
 	 * word after real last entry.
 	 */
-	.arm
+	arm_slot 2
 	.space	4
 
 	.size	sigreturn_codes, . - sigreturn_codes

arch/arm/kernel/stacktrace.c

@@ -31,7 +31,7 @@ int notrace unwind_frame(struct stackframe *frame)
 	high = ALIGN(low, THREAD_SIZE);
 
 	/* check current frame pointer is within bounds */
-	if (fp < (low + 12) || fp + 4 >= high)
+	if (fp < low + 12 || fp > high - 4)
 		return -EINVAL;
 
 	/* restore the registers from the stack frame */

arch/arm/kernel/traps.c

@@ -509,9 +509,10 @@ static inline int
 __do_cache_op(unsigned long start, unsigned long end)
 {
 	int ret;
-	unsigned long chunk = PAGE_SIZE;
 
 	do {
+		unsigned long chunk = min(PAGE_SIZE, end - start);
+
 		if (signal_pending(current)) {
 			struct thread_info *ti = current_thread_info();
 

arch/arm/lib/delay-loop.S

@@ -40,6 +40,7 @@ ENTRY(__loop_const_udelay)			@ 0 <= r0 <= 0x7fffff06
 /*
  * loops = r0 * HZ * loops_per_jiffy / 1000000
  */
+		.align 3
 
 @ Delay routine
 ENTRY(__loop_delay)

arch/arm/mach-at91/at91rm9200_time.c

@@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 static struct clock_event_device clkevt = {
 	.name		= "at91_tick",
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.rating		= 150,
 	.set_next_event	= clkevt32k_next_event,
 	.set_mode	= clkevt32k_mode,
@@ -265,11 +264,9 @@ void __init at91rm9200_timer_init(void)
 	at91_st_write(AT91_ST_RTMR, 1);
 
 	/* Setup timer clockevent, with minimum of two ticks (important!!) */
-	clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
-	clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
-	clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
 	clkevt.cpumask = cpumask_of(0);
-	clockevents_register_device(&clkevt);
+	clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
+					2, AT91_ST_ALMV);
 
 	/* register clocksource */
 	clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);

arch/arm/mach-at91/pm.h

@@ -16,7 +16,11 @@
 #include <mach/at91_ramc.h>
 #include <mach/at91rm9200_sdramc.h>
 
+#ifdef CONFIG_PM
 extern void at91_pm_set_standby(void (*at91_standby)(void));
+#else
+static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
+#endif
 
 /*
  * The AT91RM9200 goes into self-refresh mode with this command, and will

arch/arm/mach-at91/sama5d3.c

@@ -95,19 +95,19 @@ static struct clk twi0_clk = {
 	.name		= "twi0_clk",
 	.pid		= SAMA5D3_ID_TWI0,
 	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
+	.div		= AT91_PMC_PCR_DIV8,
 };
 static struct clk twi1_clk = {
 	.name		= "twi1_clk",
 	.pid		= SAMA5D3_ID_TWI1,
 	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
+	.div		= AT91_PMC_PCR_DIV8,
 };
 static struct clk twi2_clk = {
 	.name		= "twi2_clk",
 	.pid		= SAMA5D3_ID_TWI2,
 	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
+	.div		= AT91_PMC_PCR_DIV8,
 };
 static struct clk mmc0_clk = {
 	.name		= "mci0_clk",

arch/arm/mach-davinci/devices-da8xx.c

@@ -487,7 +487,7 @@ int __init da8xx_register_emac(void)
 
 static struct resource da830_mcasp1_resources[] = {
 	{
-		.name	= "mcasp1",
+		.name	= "mpu",
 		.start	= DAVINCI_DA830_MCASP1_REG_BASE,
 		.end	= DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1,
 		.flags	= IORESOURCE_MEM,
@@ -515,7 +515,7 @@ static struct platform_device da830_mcasp1_device = {
 
 static struct resource da850_mcasp_resources[] = {
 	{
-		.name	= "mcasp",
+		.name	= "mpu",
 		.start	= DAVINCI_DA8XX_MCASP0_REG_BASE,
 		.end	= DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1,
 		.flags	= IORESOURCE_MEM,

arch/arm/mach-davinci/dm355.c

@@ -641,6 +641,7 @@ static struct platform_device dm355_edma_device = {
 
 static struct resource dm355_asp1_resources[] = {
 	{
+		.name	= "mpu",
 		.start	= DAVINCI_ASP1_BASE,
 		.end	= DAVINCI_ASP1_BASE + SZ_8K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -906,7 +907,7 @@ static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
 int __init dm355_gpio_register(void)
 {
 	return davinci_gpio_register(dm355_gpio_resources,
-				     sizeof(dm355_gpio_resources),
+				     ARRAY_SIZE(dm355_gpio_resources),
 				     &dm355_gpio_platform_data);
 }
 /*----------------------------------------------------------------------*/

arch/arm/mach-davinci/dm365.c

@@ -720,7 +720,7 @@ static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
 int __init dm365_gpio_register(void)
 {
 	return davinci_gpio_register(dm365_gpio_resources,
-				     sizeof(dm365_gpio_resources),
+				     ARRAY_SIZE(dm365_gpio_resources),
 				     &dm365_gpio_platform_data);
 }
 
@@ -942,6 +942,7 @@ static struct platform_device dm365_edma_device = {
 
 static struct resource dm365_asp_resources[] = {
 	{
+		.name	= "mpu",
 		.start	= DAVINCI_DM365_ASP0_BASE,
 		.end	= DAVINCI_DM365_ASP0_BASE + SZ_8K - 1,
 		.flags	= IORESOURCE_MEM,

arch/arm/mach-davinci/dm644x.c

@@ -572,6 +572,7 @@ static struct platform_device dm644x_edma_device = {
 /* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
 static struct resource dm644x_asp_resources[] = {
 	{
+		.name	= "mpu",
 		.start	= DAVINCI_ASP0_BASE,
 		.end	= DAVINCI_ASP0_BASE + SZ_8K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -792,7 +793,7 @@ static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
 int __init dm644x_gpio_register(void)
 {
 	return davinci_gpio_register(dm644_gpio_resources,
-				     sizeof(dm644_gpio_resources),
+				     ARRAY_SIZE(dm644_gpio_resources),
 				     &dm644_gpio_platform_data);
 }
 /*----------------------------------------------------------------------*/

arch/arm/mach-davinci/dm646x.c

@@ -621,7 +621,7 @@ static struct platform_device dm646x_edma_device = {
 
 static struct resource dm646x_mcasp0_resources[] = {
 	{
-		.name	= "mcasp0",
+		.name	= "mpu",
 		.start 	= DAVINCI_DM646X_MCASP0_REG_BASE,
 		.end 	= DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1,
 		.flags 	= IORESOURCE_MEM,
@@ -641,7 +641,7 @@ static struct resource dm646x_mcasp0_resources[] = {
 
 static struct resource dm646x_mcasp1_resources[] = {
 	{
-		.name	= "mcasp1",
+		.name	= "mpu",
 		.start	= DAVINCI_DM646X_MCASP1_REG_BASE,
 		.end	= DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1,
 		.flags	= IORESOURCE_MEM,
@@ -769,7 +769,7 @@ static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
 int __init dm646x_gpio_register(void)
 {
 	return davinci_gpio_register(dm646x_gpio_resources,
-				     sizeof(dm646x_gpio_resources),
+				     ARRAY_SIZE(dm646x_gpio_resources),
 				     &dm646x_gpio_platform_data);
 }
 /*----------------------------------------------------------------------*/

arch/arm/mach-footbridge/common.c

@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <video/vga.h>
 
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -196,6 +197,8 @@ void __init footbridge_map_io(void)
 		iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
 		pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
 	}
+
+	vga_base = PCIMEM_BASE;
 }
 
 void footbridge_restart(enum reboot_mode mode, const char *cmd)

arch/arm/mach-footbridge/dc21285.c

@@ -18,7 +18,6 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
-#include <video/vga.h>
 
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
@@ -291,7 +290,6 @@ void __init dc21285_preinit(void)
 	int cfn_mode;
 
 	pcibios_min_mem = 0x81000000;
-	vga_base = PCIMEM_BASE;
 
 	mem_size = (unsigned int)high_memory - PAGE_OFFSET;
 	for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1)

arch/arm/mach-footbridge/ebsa285.c

@@ -30,21 +30,24 @@ static const struct {
 	const char *name;
 	const char *trigger;
 } ebsa285_leds[] = {
-	{ "ebsa285:amber", "heartbeat", },
-	{ "ebsa285:green", "cpu0", },
+	{ "ebsa285:amber", "cpu0", },
+	{ "ebsa285:green", "heartbeat", },
 	{ "ebsa285:red",},
 };
 
+static unsigned char hw_led_state;
+
 static void ebsa285_led_set(struct led_classdev *cdev,
 		enum led_brightness b)
 {
 	struct ebsa285_led *led = container_of(cdev,
 			struct ebsa285_led, cdev);
 
-	if (b != LED_OFF)
-		*XBUS_LEDS |= led->mask;
+	if (b == LED_OFF)
+		hw_led_state |= led->mask;
 	else
-		*XBUS_LEDS &= ~led->mask;
+		hw_led_state &= ~led->mask;
+	*XBUS_LEDS = hw_led_state;
 }
 
 static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
@@ -52,18 +55,19 @@ static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
 	struct ebsa285_led *led = container_of(cdev,
 			struct ebsa285_led, cdev);
 
-	return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF;
+	return hw_led_state & led->mask ? LED_OFF : LED_FULL;
 }
 
 static int __init ebsa285_leds_init(void)
 {
 	int i;
 
-	if (machine_is_ebsa285())
+	if (!machine_is_ebsa285())
 		return -ENODEV;
 
-	/* 3 LEDS All ON */
-	*XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
+	/* 3 LEDS all off */
+	hw_led_state = XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
+	*XBUS_LEDS = hw_led_state;
 
 	for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) {
 		struct ebsa285_led *led;

arch/arm/mach-highbank/highbank.c

@@ -17,12 +17,15 @@
 #include <linux/clkdev.h>
 #include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
+#include <linux/input.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
+#include <linux/mailbox.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
+#include <linux/reboot.h>
 #include <linux/amba/bus.h>
 #include <linux/platform_device.h>
 
@@ -130,6 +133,24 @@ static struct platform_device highbank_cpuidle_device = {
 	.name = "cpuidle-calxeda",
 };
 
+static int hb_keys_notifier(struct notifier_block *nb, unsigned long event, void *data)
+{
+	u32 key = *(u32 *)data;
+
+	if (event != 0x1000)
+		return 0;
+
+	if (key == KEY_POWER)
+		orderly_poweroff(false);
+	else if (key == 0xffff)
+		ctrl_alt_del();
+
+	return 0;
+}
+static struct notifier_block hb_keys_nb = {
+	.notifier_call = hb_keys_notifier,
+};
+
 static void __init highbank_init(void)
 {
 	struct device_node *np;
@@ -145,6 +166,8 @@ static void __init highbank_init(void)
 	bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
 	bus_register_notifier(&amba_bustype, &highbank_amba_nb);
 
+	pl320_ipc_register_notifier(&hb_keys_nb);
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
 	if (psci_ops.cpu_suspend)

arch/arm/mach-omap2/board-generic.c

@@ -131,6 +131,24 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
 	.dt_compat	= omap3_gp_boards_compat,
 	.restart	= omap3xxx_restart,
 MACHINE_END
+
+static const char *am3517_boards_compat[] __initdata = {
+	"ti,am3517",
+	NULL,
+};
+
+DT_MACHINE_START(AM3517_DT, "Generic AM3517 (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= am35xx_init_early,
+	.init_irq	= omap_intc_of_init,
+	.handle_irq	= omap3_intc_handle_irq,
+	.init_machine	= omap_generic_init,
+	.init_late	= omap3_init_late,
+	.init_time	= omap3_gptimer_timer_init,
+	.dt_compat	= am3517_boards_compat,
+	.restart	= omap3xxx_restart,
+MACHINE_END
 #endif
 
 #ifdef CONFIG_SOC_AM33XX

arch/arm/mach-omap2/dss-common.c

@@ -223,7 +223,7 @@ void __init omap_4430sdp_display_init_of(void)
 static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = {
 	.name                   = "dvi",
 	.source                 = "tfp410.0",
-	.i2c_bus_num            = 3,
+	.i2c_bus_num            = 2,
 };
 
 static struct platform_device omap3_igep2_dvi_connector_device = {

arch/arm/mach-omap2/omap_device.c

@@ -183,6 +183,10 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 odbfd_exit1:
 	kfree(hwmods);
 odbfd_exit:
+	/* if data/we are at fault.. load up a fail handler */
+	if (ret)
+		pdev->dev.pm_domain = &omap_device_fail_pm_domain;
+
 	return ret;
 }
 
@@ -604,6 +608,19 @@ static int _od_runtime_resume(struct device *dev)
 
 	return pm_generic_runtime_resume(dev);
 }
+
+static int _od_fail_runtime_suspend(struct device *dev)
+{
+	dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__);
+	return -ENODEV;
+}
+
+static int _od_fail_runtime_resume(struct device *dev)
+{
+	dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__);
+	return -ENODEV;
+}
+
 #endif
 
 #ifdef CONFIG_SUSPEND
@@ -657,6 +674,13 @@ static int _od_resume_noirq(struct device *dev)
 #define _od_resume_noirq NULL
 #endif
 
+struct dev_pm_domain omap_device_fail_pm_domain = {
+	.ops = {
+		SET_RUNTIME_PM_OPS(_od_fail_runtime_suspend,
+				   _od_fail_runtime_resume, NULL)
+	}
+};
+
 struct dev_pm_domain omap_device_pm_domain = {
 	.ops = {
 		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,

arch/arm/mach-omap2/omap_device.h

@@ -29,6 +29,7 @@
 #include "omap_hwmod.h"
 
 extern struct dev_pm_domain omap_device_pm_domain;
+extern struct dev_pm_domain omap_device_fail_pm_domain;
 
 /* omap_device._state values */
 #define OMAP_DEVICE_STATE_UNKNOWN	0

arch/arm/mach-omap2/omap_hwmod.c

@@ -399,7 +399,7 @@ static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v)
 }
 
 /**
- * _set_softreset: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
+ * _set_softreset: set OCP_SYSCONFIG.SOFTRESET bit in @v
  * @oh: struct omap_hwmod *
  * @v: pointer to register contents to modify
  *
@@ -426,6 +426,36 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v)
 	return 0;
 }
 
+/**
+ * _clear_softreset: clear OCP_SYSCONFIG.SOFTRESET bit in @v
+ * @oh: struct omap_hwmod *
+ * @v: pointer to register contents to modify
+ *
+ * Clear the SOFTRESET bit in @v for hwmod @oh.  Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int _clear_softreset(struct omap_hwmod *oh, u32 *v)
+{
+	u32 softrst_mask;
+
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
+		return -EINVAL;
+
+	if (!oh->class->sysc->sysc_fields) {
+		WARN(1,
+		     "omap_hwmod: %s: sysc_fields absent for sysconfig class\n",
+		     oh->name);
+		return -EINVAL;
+	}
+
+	softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
+
+	*v &= ~softrst_mask;
+
+	return 0;
+}
+
 /**
  * _wait_softreset_complete - wait for an OCP softreset to complete
  * @oh: struct omap_hwmod * to wait on
@@ -785,6 +815,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
 			pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
 				   oh->name, os->clk);
 			ret = -EINVAL;
+			continue;
 		}
 		os->_clk = c;
 		/*
@@ -821,6 +852,7 @@ static int _init_opt_clks(struct omap_hwmod *oh)
 			pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
 				   oh->name, oc->clk);
 			ret = -EINVAL;
+			continue;
 		}
 		oc->_clk = c;
 		/*
@@ -1911,6 +1943,12 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 	ret = _set_softreset(oh, &v);
 	if (ret)
 		goto dis_opt_clks;
+
+	_write_sysconfig(v, oh);
+	ret = _clear_softreset(oh, &v);
+	if (ret)
+		goto dis_opt_clks;
+
 	_write_sysconfig(v, oh);
 
 	if (oh->class->sysc->srst_udelay)
@@ -2326,38 +2364,80 @@ static int _shutdown(struct omap_hwmod *oh)
 	return 0;
 }
 
+static int of_dev_find_hwmod(struct device_node *np,
+			     struct omap_hwmod *oh)
+{
+	int count, i, res;
+	const char *p;
+
+	count = of_property_count_strings(np, "ti,hwmods");
+	if (count < 1)
+		return -ENODEV;
+
+	for (i = 0; i < count; i++) {
+		res = of_property_read_string_index(np, "ti,hwmods",
+						    i, &p);
+		if (res)
+			continue;
+		if (!strcmp(p, oh->name)) {
+			pr_debug("omap_hwmod: dt %s[%i] uses hwmod %s\n",
+				 np->name, i, oh->name);
+			return i;
+		}
+	}
+
+	return -ENODEV;
+}
+
 /**
  * of_dev_hwmod_lookup - look up needed hwmod from dt blob
  * @np: struct device_node *
  * @oh: struct omap_hwmod *
+ * @index: index of the entry found
+ * @found: struct device_node * found or NULL
  *
  * Parse the dt blob and find out needed hwmod. Recursive function is
  * implemented to take care hierarchical dt blob parsing.
- * Return: The device node on success or NULL on failure.
+ * Return: Returns 0 on success, -ENODEV when not found.
  */
-static struct device_node *of_dev_hwmod_lookup(struct device_node *np,
-						struct omap_hwmod *oh)
+static int of_dev_hwmod_lookup(struct device_node *np,
+			       struct omap_hwmod *oh,
+			       int *index,
+			       struct device_node **found)
 {
-	struct device_node *np0 = NULL, *np1 = NULL;
-	const char *p;
+	struct device_node *np0 = NULL;
+	int res;
+
+	res = of_dev_find_hwmod(np, oh);
+	if (res >= 0) {
+		*found = np;
+		*index = res;
+		return 0;
+	}
 
 	for_each_child_of_node(np, np0) {
-		if (of_find_property(np0, "ti,hwmods", NULL)) {
-			p = of_get_property(np0, "ti,hwmods", NULL);
-			if (!strcmp(p, oh->name))
-				return np0;
-			np1 = of_dev_hwmod_lookup(np0, oh);
-			if (np1)
-				return np1;
+		struct device_node *fc;
+		int i;
+
+		res = of_dev_hwmod_lookup(np0, oh, &i, &fc);
+		if (res == 0) {
+			*found = fc;
+			*index = i;
+			return 0;
 		}
 	}
-	return NULL;
+
+	*found = NULL;
+	*index = 0;
+
+	return -ENODEV;
 }
 
 /**
  * _init_mpu_rt_base - populate the virtual address for a hwmod
  * @oh: struct omap_hwmod * to locate the virtual address
  * @data: (unused, caller should pass NULL)
+ * @index: index of the reg entry iospace in device tree
  * @np: struct device_node * of the IP block's device node in the DT data
  *
  * Cache the virtual address used by the MPU to access this IP block's
@@ -2368,7 +2448,7 @@ static struct device_node *of_dev_hwmod_lookup(struct device_node *np,
  * -ENXIO on absent or invalid register target address space.
  */
 static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
-				    struct device_node *np)
+				    int index, struct device_node *np)
 {
 	struct omap_hwmod_addr_space *mem;
 	void __iomem *va_start = NULL;
@@ -2390,13 +2470,17 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
 		if (!np)
 			return -ENXIO;
 
-		va_start = of_iomap(np, oh->mpu_rt_idx);
+		va_start = of_iomap(np, index + oh->mpu_rt_idx);
 	} else {
 		va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
 	}
 
 	if (!va_start) {
-		pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
+		if (mem)
+			pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
+		else
+			pr_err("omap_hwmod: %s: Missing dt reg%i for %s\n",
+			       oh->name, index, np->full_name);
 		return -ENXIO;
 	}
 
@@ -2422,17 +2506,29 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
  */
 static int __init _init(struct omap_hwmod *oh, void *data)
 {
-	int r;
+	int r, index;
 	struct device_node *np = NULL;
 
 	if (oh->_state != _HWMOD_STATE_REGISTERED)
 		return 0;
 
-	if (of_have_populated_dt())
-		np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
+	if (of_have_populated_dt()) {
+		struct device_node *bus;
+
+		bus = of_find_node_by_name(NULL, "ocp");
+		if (!bus)
+			return -ENODEV;
+
+		r = of_dev_hwmod_lookup(bus, oh, &index, &np);
+		if (r)
+			pr_debug("omap_hwmod: %s missing dt data\n", oh->name);
+		else if (np && index)
+			pr_warn("omap_hwmod: %s using broken dt data from %s\n",
+				oh->name, np->name);
+	}
 
 	if (oh->class->sysc) {
-		r = _init_mpu_rt_base(oh, NULL, np);
+		r = _init_mpu_rt_base(oh, NULL, index, np);
 		if (r < 0) {
 			WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
 			     oh->name);
@@ -3169,6 +3265,11 @@ int omap_hwmod_softreset(struct omap_hwmod *oh)
 		goto error;
 	_write_sysconfig(v, oh);
 
+	ret = _clear_softreset(oh, &v);
+	if (ret)
+		goto error;
+	_write_sysconfig(v, oh);
+
 error:
 	return ret;
 }

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -1943,7 +1943,8 @@ static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = {
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
 			   SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
@@ -2021,15 +2022,7 @@ static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
 	 * hence HWMOD_SWSUP_MSTANDBY
 	 */
 
-	/*
-	 * During system boot; If the hwmod framework resets the module
-	 * the module will have smart idle settings; which can lead to deadlock
-	 * (above Errata Id:i660); so, dont reset the module during boot;
-	 * Use HWMOD_INIT_NO_RESET.
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
-			  HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
 };
 
 /*

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -2937,7 +2937,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET),
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
 			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
@@ -3001,15 +3001,7 @@ static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
 	 * hence HWMOD_SWSUP_MSTANDBY
 	 */
 
-	/*
-	 * During system boot; If the hwmod framework resets the module
-	 * the module will have smart idle settings; which can lead to deadlock
-	 * (above Errata Id:i660); so, dont reset the module during boot;
-	 * Use HWMOD_INIT_NO_RESET.
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
-			  HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
 };
 
 /*

arch/arm/mach-omap2/omap_hwmod_54xx_data.c

@@ -1544,7 +1544,8 @@ static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
 			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
@@ -1598,15 +1599,7 @@ static struct omap_hwmod omap54xx_usb_host_hs_hwmod = {
 	 * hence HWMOD_SWSUP_MSTANDBY
 	 */
 
-	/*
-	 * During system boot; If the hwmod framework resets the module
-	 * the module will have smart idle settings; which can lead to deadlock
-	 * (above Errata Id:i660); so, dont reset the module during boot;
-	 * Use HWMOD_INIT_NO_RESET.
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
-			  HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
 	.main_clk	= "l3init_60m_fclk",
 	.prcm = {
 		.omap4 = {

arch/arm/mach-omap2/pdata-quirks.c

@@ -139,6 +139,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 
 static struct pdata_init pdata_quirks[] __initdata = {
 #ifdef CONFIG_ARCH_OMAP3
+	{ "nokia,omap3-n900", hsmmc2_internal_input_clk, },
 	{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
 	{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
 	{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },

arch/arm/mach-omap2/powerdomain.c

@@ -128,7 +128,8 @@ skip_voltdm:
 	for (i = 0; i < pwrdm->banks; i++)
 		pwrdm->ret_mem_off_counter[i] = 0;
 
-	arch_pwrdm->pwrdm_wait_transition(pwrdm);
+	if (arch_pwrdm && arch_pwrdm->pwrdm_wait_transition)
+		arch_pwrdm->pwrdm_wait_transition(pwrdm);
 	pwrdm->state = pwrdm_read_pwrst(pwrdm);
 	pwrdm->state_counter[pwrdm->state] = 1;
 

arch/arm/mach-pxa/reset.c

@@ -13,6 +13,7 @@
 
 #include <mach/regs-ost.h>
 #include <mach/reset.h>
+#include <mach/smemc.h>
 
 unsigned int reset_status;
 EXPORT_SYMBOL(reset_status);
@@ -81,6 +82,12 @@ static void do_hw_reset(void)
 	writel_relaxed(OSSR_M3, OSSR);
 	/* ... in 100 ms */
 	writel_relaxed(readl_relaxed(OSCR) + 368640, OSMR3);
+	/*
+	 * SDRAM hangs on watchdog reset on Marvell PXA270 (erratum 71)
+	 * we put SDRAM into self-refresh to prevent that
+	 */
+	while (1)
+		writel_relaxed(MDREFR_SLFRSH, MDREFR);
 }
 
 void pxa_restart(enum reboot_mode mode, const char *cmd)
@@ -104,4 +111,3 @@ void pxa_restart(enum reboot_mode mode, const char *cmd)
 		break;
 	}
 }
-

arch/arm/mach-pxa/tosa.c

@@ -425,57 +425,57 @@ static struct platform_device tosa_power_device = {
  * Tosa Keyboard
  */
 static const uint32_t tosakbd_keymap[] = {
-	KEY(0, 2, KEY_W),
-	KEY(0, 6, KEY_K),
-	KEY(0, 7, KEY_BACKSPACE),
-	KEY(0, 8, KEY_P),
-	KEY(1, 1, KEY_Q),
-	KEY(1, 2, KEY_E),
-	KEY(1, 3, KEY_T),
-	KEY(1, 4, KEY_Y),
-	KEY(1, 6, KEY_O),
-	KEY(1, 7, KEY_I),
-	KEY(1, 8, KEY_COMMA),
-	KEY(2, 1, KEY_A),
-	KEY(2, 2, KEY_D),
-	KEY(2, 3, KEY_G),
-	KEY(2, 4, KEY_U),
-	KEY(2, 6, KEY_L),
-	KEY(2, 7, KEY_ENTER),
-	KEY(2, 8, KEY_DOT),
-	KEY(3, 1, KEY_Z),
-	KEY(3, 2, KEY_C),
-	KEY(3, 3, KEY_V),
-	KEY(3, 4, KEY_J),
-	KEY(3, 5, TOSA_KEY_ADDRESSBOOK),
-	KEY(3, 6, TOSA_KEY_CANCEL),
-	KEY(3, 7, TOSA_KEY_CENTER),
-	KEY(3, 8, TOSA_KEY_OK),
-	KEY(3, 9, KEY_LEFTSHIFT),
-	KEY(4, 1, KEY_S),
-	KEY(4, 2, KEY_R),
-	KEY(4, 3, KEY_B),
-	KEY(4, 4, KEY_N),
-	KEY(4, 5, TOSA_KEY_CALENDAR),
-	KEY(4, 6, TOSA_KEY_HOMEPAGE),
-	KEY(4, 7, KEY_LEFTCTRL),
-	KEY(4, 8, TOSA_KEY_LIGHT),
-	KEY(4, 10, KEY_RIGHTSHIFT),
-	KEY(5, 1, KEY_TAB),
-	KEY(5, 2, KEY_SLASH),
-	KEY(5, 3, KEY_H),
-	KEY(5, 4, KEY_M),
-	KEY(5, 5, TOSA_KEY_MENU),
-	KEY(5, 7, KEY_UP),
-	KEY(5, 11, TOSA_KEY_FN),
-	KEY(6, 1, KEY_X),
-	KEY(6, 2, KEY_F),
-	KEY(6, 3, KEY_SPACE),
-	KEY(6, 4, KEY_APOSTROPHE),
-	KEY(6, 5, TOSA_KEY_MAIL),
-	KEY(6, 6, KEY_LEFT),
-	KEY(6, 7, KEY_DOWN),
-	KEY(6, 8, KEY_RIGHT),
+	KEY(0, 1, KEY_W),
+	KEY(0, 5, KEY_K),
+	KEY(0, 6, KEY_BACKSPACE),
+	KEY(0, 7, KEY_P),
+	KEY(1, 0, KEY_Q),
+	KEY(1, 1, KEY_E),
+	KEY(1, 2, KEY_T),
+	KEY(1, 3, KEY_Y),
+	KEY(1, 5, KEY_O),
+	KEY(1, 6, KEY_I),
+	KEY(1, 7, KEY_COMMA),
+	KEY(2, 0, KEY_A),
+	KEY(2, 1, KEY_D),
+	KEY(2, 2, KEY_G),
+	KEY(2, 3, KEY_U),
+	KEY(2, 5, KEY_L),
+	KEY(2, 6, KEY_ENTER),
+	KEY(2, 7, KEY_DOT),
+	KEY(3, 0, KEY_Z),
+	KEY(3, 1, KEY_C),
+	KEY(3, 2, KEY_V),
+	KEY(3, 3, KEY_J),
+	KEY(3, 4, TOSA_KEY_ADDRESSBOOK),
+	KEY(3, 5, TOSA_KEY_CANCEL),
+	KEY(3, 6, TOSA_KEY_CENTER),
+	KEY(3, 7, TOSA_KEY_OK),
+	KEY(3, 8, KEY_LEFTSHIFT),
+	KEY(4, 0, KEY_S),
+	KEY(4, 1, KEY_R),
+	KEY(4, 2, KEY_B),
+	KEY(4, 3, KEY_N),
+	KEY(4, 4, TOSA_KEY_CALENDAR),
+	KEY(4, 5, TOSA_KEY_HOMEPAGE),
+	KEY(4, 6, KEY_LEFTCTRL),
+	KEY(4, 7, TOSA_KEY_LIGHT),
+	KEY(4, 9, KEY_RIGHTSHIFT),
+	KEY(5, 0, KEY_TAB),
+	KEY(5, 1, KEY_SLASH),
+	KEY(5, 2, KEY_H),
+	KEY(5, 3, KEY_M),
+	KEY(5, 4, TOSA_KEY_MENU),
+	KEY(5, 6, KEY_UP),
+	KEY(5, 10, TOSA_KEY_FN),
+	KEY(6, 0, KEY_X),
+	KEY(6, 1, KEY_F),
+	KEY(6, 2, KEY_SPACE),
+	KEY(6, 3, KEY_APOSTROPHE),
+	KEY(6, 4, TOSA_KEY_MAIL),
+	KEY(6, 5, KEY_LEFT),
+	KEY(6, 6, KEY_DOWN),
+	KEY(6, 7, KEY_RIGHT),
 };
 
 static struct matrix_keymap_data tosakbd_keymap_data = {

arch/arm/mach-socfpga/Kconfig

@@ -10,6 +10,7 @@ config ARCH_SOCFPGA
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PL061 if GPIOLIB
 	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MFD_SYSCON
 	select SPARSE_IRQ

arch/arm/mach-tegra/fuse.c

@@ -198,10 +198,12 @@ void __init tegra_init_fuse(void)
 	switch (tegra_chip_id) {
 	case TEGRA20:
 		tegra20_fuse_init_randomness();
+		break;
 	case TEGRA30:
 	case TEGRA114:
 	default:
 		tegra30_fuse_init_randomness();
+		break;
 	}
 
 	pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",

arch/arm/mach-ux500/cpu-db8500.c

@@ -140,6 +140,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires call-back bindings. */
 	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
 	/* Requires DMA bindings. */
+	OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0",  &mop500_sdi0_data),
+	OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1",  &mop500_sdi1_data),
+	OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2",  &mop500_sdi2_data),
+	OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4",  &mop500_sdi4_data),
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
 		       "ux500-msp-i2s.0", &msp0_platform_data),
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,

arch/arm/mm/dma-mapping.c

@@ -9,6 +9,7 @@
  *
  *  DMA uncached mapping support.
  */
+#include <linux/bootmem.h>
 #include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/gfp.h>
@@ -157,6 +158,44 @@ struct dma_map_ops arm_coherent_dma_ops = {
 };
 EXPORT_SYMBOL(arm_coherent_dma_ops);
 
+static int __dma_supported(struct device *dev, u64 mask, bool warn)
+{
+	unsigned long max_dma_pfn;
+
+	/*
+	 * If the mask allows for more memory than we can address,
+	 * and we actually have that much memory, then we must
+	 * indicate that DMA to this device is not supported.
+	 */
+	if (sizeof(mask) != sizeof(dma_addr_t) &&
+	    mask > (dma_addr_t)~0 &&
+	    dma_to_pfn(dev, ~0) < max_pfn) {
+		if (warn) {
+			dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n",
+				 mask);
+			dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n");
+		}
+		return 0;
+	}
+
+	max_dma_pfn = min(max_pfn, arm_dma_pfn_limit);
+
+	/*
+	 * Translate the device's DMA mask to a PFN limit.  This
+	 * PFN number includes the page which we can DMA to.
+	 */
+	if (dma_to_pfn(dev, mask) < max_dma_pfn) {
+		if (warn)
+			dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n",
+				 mask,
+				 dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1,
+				 max_dma_pfn + 1);
+		return 0;
+	}
+
+	return 1;
+}
+
 static u64 get_coherent_dma_mask(struct device *dev)
 {
 	u64 mask = (u64)DMA_BIT_MASK(32);
@@ -173,32 +212,8 @@ static u64 get_coherent_dma_mask(struct device *dev)
 			return 0;
 		}
 
-		/*
-		 * If the mask allows for more memory than we can address,
-		 * and we actually have that much memory, then fail the
-		 * allocation.
-		 */
-		if (sizeof(mask) != sizeof(dma_addr_t) &&
-		    mask > (dma_addr_t)~0 &&
-		    dma_to_pfn(dev, ~0) > arm_dma_pfn_limit) {
-			dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n",
-				 mask);
-			dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n");
-			return 0;
-		}
-
-		/*
-		 * Now check that the mask, when translated to a PFN,
-		 * fits within the allowable addresses which we can
-		 * allocate.
-		 */
-		if (dma_to_pfn(dev, mask) < arm_dma_pfn_limit) {
-			dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n",
-				 mask,
-				 dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1,
-				 arm_dma_pfn_limit + 1);
+		if (!__dma_supported(dev, mask, true))
 			return 0;
-		}
 	}
 
 	return mask;
@@ -1027,28 +1042,7 @@ void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
  */
 int dma_supported(struct device *dev, u64 mask)
 {
-	unsigned long limit;
-
-	/*
-	 * If the mask allows for more memory than we can address,
-	 * and we actually have that much memory, then we must
-	 * indicate that DMA to this device is not supported.
-	 */
-	if (sizeof(mask) != sizeof(dma_addr_t) &&
-	    mask > (dma_addr_t)~0 &&
-	    dma_to_pfn(dev, ~0) > arm_dma_pfn_limit)
-		return 0;
-
-	/*
-	 * Translate the device's DMA mask to a PFN limit.  This
-	 * PFN number includes the page which we can DMA to.
-	 */
-	limit = dma_to_pfn(dev, mask);
-
-	if (limit < arm_dma_pfn_limit)
-		return 0;
-
-	return 1;
+	return __dma_supported(dev, mask, false);
 }
 EXPORT_SYMBOL(dma_supported);
 

arch/arm/mm/init.c

@@ -229,7 +229,7 @@ void __init setup_dma_zone(const struct machine_desc *mdesc)
 #ifdef CONFIG_ZONE_DMA
 	if (mdesc->dma_zone_size) {
 		arm_dma_zone_size = mdesc->dma_zone_size;
-		arm_dma_limit = PHYS_OFFSET + arm_dma_zone_size - 1;
+		arm_dma_limit = __pv_phys_offset + arm_dma_zone_size - 1;
 	} else
 		arm_dma_limit = 0xffffffff;
 	arm_dma_pfn_limit = arm_dma_limit >> PAGE_SHIFT;

arch/arm/mm/mmap.c

@@ -146,7 +146,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 
 	info.flags = VM_UNMAPPED_AREA_TOPDOWN;
 	info.length = len;
-	info.low_limit = PAGE_SIZE;
+	info.low_limit = FIRST_USER_ADDRESS;
 	info.high_limit = mm->mmap_base;
 	info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0;
 	info.align_offset = pgoff << PAGE_SHIFT;

arch/arm/mm/pgd.c

@@ -87,7 +87,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 		init_pud = pud_offset(init_pgd, 0);
 		init_pmd = pmd_offset(init_pud, 0);
 		init_pte = pte_offset_map(init_pmd, 0);
-		set_pte_ext(new_pte, *init_pte, 0);
+		set_pte_ext(new_pte + 0, init_pte[0], 0);
+		set_pte_ext(new_pte + 1, init_pte[1], 0);
 		pte_unmap(init_pte);
 		pte_unmap(new_pte);
 	}

arch/arm/plat-omap/include/plat/dmtimer.h

@@ -336,8 +336,11 @@ static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
 	if (timer->posted)
 		return;
 
-	if (timer->errata & OMAP_TIMER_ERRATA_I103_I767)
+	if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
+		timer->posted = OMAP_TIMER_NONPOSTED;
+		__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
 		return;
+	}
 
 	__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
 			      OMAP_TIMER_CTRL_POSTED, 0);

arch/arm/xen/p2m.c

@@ -25,8 +25,9 @@ struct xen_p2m_entry {
 	struct rb_node rbnode_phys;
 };
 
-rwlock_t p2m_lock;
+static rwlock_t p2m_lock;
 struct rb_root phys_to_mach = RB_ROOT;
+EXPORT_SYMBOL_GPL(phys_to_mach);
 static struct rb_root mach_to_phys = RB_ROOT;
 
 static int xen_add_phys_to_mach_entry(struct xen_p2m_entry *new)
@@ -200,7 +201,7 @@ bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
 }
 EXPORT_SYMBOL_GPL(__set_phys_to_machine);
 
-int p2m_init(void)
+static int p2m_init(void)
 {
 	rwlock_init(&p2m_lock);
 	return 0;