iwlwifi: remove dead code for internal devices only

We had a bunch of code that was relevant for internal
devices only. Those devices are now being depreceated.
Kill all the now unneeded code.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

drivers/net/wireless/intel/iwlwifi/cfg/8000.c

@@ -100,14 +100,6 @@
 #define NVM_HW_SECTION_NUM_FAMILY_8000		10
 #define DEFAULT_NVM_FILE_FAMILY_8000C		"nvmData-8000C"
 
-/* Max SDIO RX/TX aggregation sizes of the ADDBA request/response */
-#define MAX_RX_AGG_SIZE_8260_SDIO	21
-#define MAX_TX_AGG_SIZE_8260_SDIO	40
-
-/* Max A-MPDU exponent for HT and VHT */
-#define MAX_HT_AMPDU_EXPONENT_8260_SDIO	IEEE80211_HT_MAX_AMPDU_32K
-#define MAX_VHT_AMPDU_EXPONENT_8260_SDIO	IEEE80211_VHT_MAX_AMPDU_32K
-
 static const struct iwl_base_params iwl8000_base_params = {
 	.eeprom_size = OTP_LOW_IMAGE_SIZE_FAMILY_8000,
 	.num_of_queues = 31,
@@ -234,48 +226,5 @@ const struct iwl_cfg iwl4165_2ac_cfg = {
 	.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K,
 };
 
-const struct iwl_cfg iwl8260_2ac_sdio_cfg = {
-	.name = "Intel(R) Dual Band Wireless-AC 8260",
-	.fw_name_pre = IWL8000_FW_PRE,
-	IWL_DEVICE_8260,
-	.ht_params = &iwl8000_ht_params,
-	.nvm_ver = IWL8000_NVM_VERSION,
-	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
-	.max_rx_agg_size = MAX_RX_AGG_SIZE_8260_SDIO,
-	.max_tx_agg_size = MAX_TX_AGG_SIZE_8260_SDIO,
-	.disable_dummy_notification = true,
-	.max_ht_ampdu_exponent  = MAX_HT_AMPDU_EXPONENT_8260_SDIO,
-	.max_vht_ampdu_exponent = MAX_VHT_AMPDU_EXPONENT_8260_SDIO,
-};
-
-const struct iwl_cfg iwl8265_2ac_sdio_cfg = {
-	.name = "Intel(R) Dual Band Wireless-AC 8265",
-	.fw_name_pre = IWL8265_FW_PRE,
-	IWL_DEVICE_8265,
-	.ht_params = &iwl8000_ht_params,
-	.nvm_ver = IWL8000_NVM_VERSION,
-	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
-	.max_rx_agg_size = MAX_RX_AGG_SIZE_8260_SDIO,
-	.max_tx_agg_size = MAX_TX_AGG_SIZE_8260_SDIO,
-	.disable_dummy_notification = true,
-	.max_ht_ampdu_exponent  = MAX_HT_AMPDU_EXPONENT_8260_SDIO,
-	.max_vht_ampdu_exponent = MAX_VHT_AMPDU_EXPONENT_8260_SDIO,
-};
-
-const struct iwl_cfg iwl4165_2ac_sdio_cfg = {
-	.name = "Intel(R) Dual Band Wireless-AC 4165",
-	.fw_name_pre = IWL8000_FW_PRE,
-	IWL_DEVICE_8000,
-	.ht_params = &iwl8000_ht_params,
-	.nvm_ver = IWL8000_NVM_VERSION,
-	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
-	.max_rx_agg_size = MAX_RX_AGG_SIZE_8260_SDIO,
-	.max_tx_agg_size = MAX_TX_AGG_SIZE_8260_SDIO,
-	.bt_shared_single_ant = true,
-	.disable_dummy_notification = true,
-	.max_ht_ampdu_exponent  = MAX_HT_AMPDU_EXPONENT_8260_SDIO,
-	.max_vht_ampdu_exponent = MAX_VHT_AMPDU_EXPONENT_8260_SDIO,
-};
-
 MODULE_FIRMWARE(IWL8000_MODULE_FIRMWARE(IWL8000_UCODE_API_MAX));
 MODULE_FIRMWARE(IWL8265_MODULE_FIRMWARE(IWL8265_UCODE_API_MAX));

drivers/net/wireless/intel/iwlwifi/fw/file.h

@@ -136,7 +136,7 @@ enum iwl_ucode_tlv_type {
 	IWL_UCODE_TLV_N_SCAN_CHANNELS		= 31,
 	IWL_UCODE_TLV_PAGING		= 32,
 	IWL_UCODE_TLV_SEC_RT_USNIFFER	= 34,
-	IWL_UCODE_TLV_SDIO_ADMA_ADDR	= 35,
+	/* 35 is unused */
 	IWL_UCODE_TLV_FW_VERSION	= 36,
 	IWL_UCODE_TLV_FW_DBG_DEST	= 38,
 	IWL_UCODE_TLV_FW_DBG_CONF	= 39,

drivers/net/wireless/intel/iwlwifi/fw/img.h

@@ -138,11 +138,6 @@ struct fw_img {
 	u32 paging_mem_size;
 };
 
-struct iwl_sf_region {
-	u32 addr;
-	u32 size;
-};
-
 /*
  * Block paging calculations
  */
@@ -257,7 +252,6 @@ enum iwl_fw_type {
  * @type: firmware type (&enum iwl_fw_type)
  * @cipher_scheme: optional external cipher scheme.
  * @human_readable: human readable version
- * @sdio_adma_addr: the default address to set for the ADMA in SDIO mode until
  *	we get the ALIVE from the uCode
  * @dbg_dest_tlv: points to the destination TLV for debug
  * @dbg_conf_tlv: array of pointers to configuration TLVs for debug
@@ -290,8 +284,6 @@ struct iwl_fw {
 	struct iwl_fw_cipher_scheme cs[IWL_UCODE_MAX_CS];
 	u8 human_readable[FW_VER_HUMAN_READABLE_SZ];
 
-	u32 sdio_adma_addr;
-
 	struct iwl_fw_dbg_dest_tlv *dbg_dest_tlv;
 	struct iwl_fw_dbg_conf_tlv *dbg_conf_tlv[FW_DBG_CONF_MAX];
 	size_t dbg_conf_tlv_len[FW_DBG_CONF_MAX];

drivers/net/wireless/intel/iwlwifi/iwl-config.h

@@ -467,9 +467,6 @@ extern const struct iwl_cfg iwl8260_2ac_cfg;
 extern const struct iwl_cfg iwl8265_2ac_cfg;
 extern const struct iwl_cfg iwl8275_2ac_cfg;
 extern const struct iwl_cfg iwl4165_2ac_cfg;
-extern const struct iwl_cfg iwl8260_2ac_sdio_cfg;
-extern const struct iwl_cfg iwl8265_2ac_sdio_cfg;
-extern const struct iwl_cfg iwl4165_2ac_sdio_cfg;
 extern const struct iwl_cfg iwl9160_2ac_cfg;
 extern const struct iwl_cfg iwl9260_2ac_cfg;
 extern const struct iwl_cfg iwl9270_2ac_cfg;

drivers/net/wireless/intel/iwlwifi/iwl-csr.h

@@ -218,7 +218,6 @@
 #define CSR_INT_BIT_FH_TX        (1 << 27) /* Tx DMA FH_INT[1:0] */
 #define CSR_INT_BIT_SCD          (1 << 26) /* TXQ pointer advanced */
 #define CSR_INT_BIT_SW_ERR       (1 << 25) /* uCode error */
-#define CSR_INT_BIT_PAGING       (1 << 24) /* SDIO PAGING */
 #define CSR_INT_BIT_RF_KILL      (1 << 7)  /* HW RFKILL switch GP_CNTRL[27] toggled */
 #define CSR_INT_BIT_CT_KILL      (1 << 6)  /* Critical temp (chip too hot) rfkill */
 #define CSR_INT_BIT_SW_RX        (1 << 3)  /* Rx, command responses */
@@ -229,7 +228,6 @@
 				 CSR_INT_BIT_HW_ERR  | \
 				 CSR_INT_BIT_FH_TX   | \
 				 CSR_INT_BIT_SW_ERR  | \
-				 CSR_INT_BIT_PAGING  | \
 				 CSR_INT_BIT_RF_KILL | \
 				 CSR_INT_BIT_SW_RX   | \
 				 CSR_INT_BIT_WAKEUP  | \

drivers/net/wireless/intel/iwlwifi/iwl-drv.c

@@ -1039,12 +1039,6 @@ static int iwl_parse_tlv_firmware(struct iwl_drv *drv,
 			drv->fw.img[usniffer_img].paging_mem_size =
 				paging_mem_size;
 			break;
-		case IWL_UCODE_TLV_SDIO_ADMA_ADDR:
-			if (tlv_len != sizeof(u32))
-				goto invalid_tlv_len;
-			drv->fw.sdio_adma_addr =
-				le32_to_cpup((__le32 *)tlv_data);
-			break;
 		case IWL_UCODE_TLV_FW_GSCAN_CAPA:
 			/*
 			 * Don't return an error in case of a shorter tlv_len

drivers/net/wireless/intel/iwlwifi/iwl-trans.h

@@ -398,8 +398,6 @@ struct iwl_hcmd_arr {
  * @command_groups: array of command groups, each member is an array of the
  *	commands in the group; for debugging only
  * @command_groups_size: number of command groups, to avoid illegal access
- * @sdio_adma_addr: the default address to set for the ADMA in SDIO mode until
- *	we get the ALIVE from the uCode
  * @cb_data_offs: offset inside skb->cb to store transport data at, must have
  *	space for at least two pointers
  */
@@ -419,8 +417,6 @@ struct iwl_trans_config {
 	const struct iwl_hcmd_arr *command_groups;
 	int command_groups_size;
 
-	u32 sdio_adma_addr;
-
 	u8 cb_data_offs;
 };
 
@@ -531,8 +527,6 @@ struct iwl_trans_ops {
 	void (*op_mode_leave)(struct iwl_trans *iwl_trans);
 	int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw,
 			bool run_in_rfkill);
-	int (*update_sf)(struct iwl_trans *trans,
-			 struct iwl_sf_region *st_fwrd_space);
 	void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr);
 	void (*stop_device)(struct iwl_trans *trans, bool low_power);
 
@@ -828,17 +822,6 @@ static inline int iwl_trans_start_fw(struct iwl_trans *trans,
 	return trans->ops->start_fw(trans, fw, run_in_rfkill);
 }
 
-static inline int iwl_trans_update_sf(struct iwl_trans *trans,
-				      struct iwl_sf_region *st_fwrd_space)
-{
-	might_sleep();
-
-	if (trans->ops->update_sf)
-		return trans->ops->update_sf(trans, st_fwrd_space);
-
-	return 0;
-}
-
 static inline void _iwl_trans_stop_device(struct iwl_trans *trans,
 					  bool low_power)
 {

drivers/net/wireless/intel/iwlwifi/mvm/fw.c

@@ -196,8 +196,6 @@ static bool iwl_alive_fn(struct iwl_notif_wait_data *notif_wait,
 		mvm->error_event_table[1] =
 			le32_to_cpu(lmac2->error_event_table_ptr);
 	mvm->log_event_table = le32_to_cpu(lmac1->log_event_table_ptr);
-	mvm->sf_space.addr = le32_to_cpu(lmac1->st_fwrd_addr);
-	mvm->sf_space.size = le32_to_cpu(lmac1->st_fwrd_size);
 
 	umac_error_event_table = le32_to_cpu(umac->error_info_addr);
 
@@ -266,7 +264,6 @@ static int iwl_mvm_load_ucode_wait_alive(struct iwl_mvm *mvm,
 	int ret, i;
 	enum iwl_ucode_type old_type = mvm->fwrt.cur_fw_img;
 	static const u16 alive_cmd[] = { MVM_ALIVE };
-	struct iwl_sf_region st_fwrd_space;
 
 	if (ucode_type == IWL_UCODE_REGULAR &&
 	    iwl_fw_dbg_conf_usniffer(mvm->fw, FW_DBG_START_FROM_ALIVE) &&
@@ -320,18 +317,6 @@ static int iwl_mvm_load_ucode_wait_alive(struct iwl_mvm *mvm,
 		return -EIO;
 	}
 
-	/*
-	 * update the sdio allocation according to the pointer we get in the
-	 * alive notification.
-	 */
-	st_fwrd_space.addr = mvm->sf_space.addr;
-	st_fwrd_space.size = mvm->sf_space.size;
-	ret = iwl_trans_update_sf(mvm->trans, &st_fwrd_space);
-	if (ret) {
-		IWL_ERR(mvm, "Failed to update SF size. ret %d\n", ret);
-		return ret;
-	}
-
 	iwl_trans_fw_alive(mvm->trans, alive_data.scd_base_addr);
 
 	/*

drivers/net/wireless/intel/iwlwifi/mvm/mvm.h

@@ -754,7 +754,6 @@ struct iwl_mvm {
 	u32 log_event_table;
 	u32 umac_error_event_table;
 	bool support_umac_log;
-	struct iwl_sf_region sf_space;
 
 	u32 ampdu_ref;
 	bool ampdu_toggle;

drivers/net/wireless/intel/iwlwifi/mvm/ops.c

@@ -703,7 +703,6 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 	trans_cfg.cb_data_offs = offsetof(struct ieee80211_tx_info,
 					  driver_data[2]);
 
-	trans_cfg.sdio_adma_addr = fw->sdio_adma_addr;
 	trans_cfg.sw_csum_tx = IWL_MVM_SW_TX_CSUM_OFFLOAD;
 
 	/* Set a short watchdog for the command queue */