Merge branches 'pm-core', 'pm-opp' and 'pm-qos'

* pm-core:
  PM / sysfs: Constify attribute groups
  PM: Constify info string used in messages
  PM: Constify returned PM event name
  PM / wakeirq: Convert to SRCU

* pm-opp:
  PM / OPP: Add dev_pm_opp_{set|put}_clkname()
  PM / OPP: Use - instead of @ for DT entries
  PM / OPP: Don't create debugfs "supply-0" directory unnecessarily
  PM / OPP: opp-microvolt is not optional if regulators are set
  PM / OPP: Don't create copy of regulators unnecessarily
  PM / OPP: Reorganize _generic_set_opp_regulator()

* pm-qos:
  PM / QoS: constify *_attribute_group.

Documentation/devicetree/bindings/opp/opp.txt

@@ -186,20 +186,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@1000000000 {
+		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <975000 970000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
-		opp@1100000000 {
+		opp-1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <1000000 980000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
-		opp@1200000000 {
+		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1025000>;
 			clock-latency-ns = <290000>;
@@ -265,20 +265,20 @@ independently.
 		 * independently.
 		 */
 
-		opp@1000000000 {
+		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <975000 970000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
-		opp@1100000000 {
+		opp-1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <1000000 980000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
-		opp@1200000000 {
+		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1025000>;
 			opp-microamp = <90000;
@@ -341,20 +341,20 @@ DVFS state together.
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@1000000000 {
+		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <975000 970000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
-		opp@1100000000 {
+		opp-1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <1000000 980000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
-		opp@1200000000 {
+		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1025000>;
 			opp-microamp = <90000>;
@@ -367,20 +367,20 @@ DVFS state together.
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@1300000000 {
+		opp-1300000000 {
 			opp-hz = /bits/ 64 <1300000000>;
 			opp-microvolt = <1050000 1045000 1055000>;
 			opp-microamp = <95000>;
 			clock-latency-ns = <400000>;
 			opp-suspend;
 		};
-		opp@1400000000 {
+		opp-1400000000 {
 			opp-hz = /bits/ 64 <1400000000>;
 			opp-microvolt = <1075000>;
 			opp-microamp = <100000>;
 			clock-latency-ns = <400000>;
 		};
-		opp@1500000000 {
+		opp-1500000000 {
 			opp-hz = /bits/ 64 <1500000000>;
 			opp-microvolt = <1100000 1010000 1110000>;
 			opp-microamp = <95000>;
@@ -409,7 +409,7 @@ Example 4: Handling multiple regulators
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@1000000000 {
+		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000>, /* Supply 0 */
 					<960000>, /* Supply 1 */
@@ -422,7 +422,7 @@ Example 4: Handling multiple regulators
 
 		/* OR */
 
-		opp@1000000000 {
+		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <975000 970000 985000>, /* Supply 0 */
 					<965000 960000 975000>, /* Supply 1 */
@@ -435,7 +435,7 @@ Example 4: Handling multiple regulators
 
 		/* OR */
 
-		opp@1000000000 {
+		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <975000 970000 985000>, /* Supply 0 */
 					<965000 960000 975000>, /* Supply 1 */
@@ -467,7 +467,7 @@ Example 5: opp-supported-hw
 		status = "okay";
 		opp-shared;
 
-		opp@600000000 {
+		opp-600000000 {
 			/*
 			 * Supports all substrate and process versions for 0xF
 			 * cuts, i.e. only first four cuts.
@@ -478,7 +478,7 @@ Example 5: opp-supported-hw
 			...
 		};
 
-		opp@800000000 {
+		opp-800000000 {
 			/*
 			 * Supports:
 			 * - cuts: only one, 6th cut (represented by 6th bit).
@@ -510,7 +510,7 @@ Example 6: opp-microvolt-<name>, opp-microamp-<name>:
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@1000000000 {
+		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt-slow = <915000 900000 925000>;
 			opp-microvolt-fast = <975000 970000 985000>;
@@ -518,7 +518,7 @@ Example 6: opp-microvolt-<name>, opp-microamp-<name>:
 			opp-microamp-fast =  <71000>;
 		};
 
-		opp@1200000000 {
+		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */
 					      <925000 910000 935000>; /* Supply vcc1 */

drivers/base/power/main.c

@@ -62,7 +62,7 @@ static pm_message_t pm_transition;
 
 static int async_error;
 
-static char *pm_verb(int event)
+static const char *pm_verb(int event)
 {
 	switch (event) {
 	case PM_EVENT_SUSPEND:
@@ -208,7 +208,8 @@ static ktime_t initcall_debug_start(struct device *dev)
 }
 
 static void initcall_debug_report(struct device *dev, ktime_t calltime,
-				  int error, pm_message_t state, char *info)
+				  int error, pm_message_t state,
+				  const char *info)
 {
 	ktime_t rettime;
 	s64 nsecs;
@@ -403,21 +404,22 @@ static pm_callback_t pm_noirq_op(const struct dev_pm_ops *ops, pm_message_t stat
 	return NULL;
 }
 
-static void pm_dev_dbg(struct device *dev, pm_message_t state, char *info)
+static void pm_dev_dbg(struct device *dev, pm_message_t state, const char *info)
 {
 	dev_dbg(dev, "%s%s%s\n", info, pm_verb(state.event),
 		((state.event & PM_EVENT_SLEEP) && device_may_wakeup(dev)) ?
 		", may wakeup" : "");
 }
 
-static void pm_dev_err(struct device *dev, pm_message_t state, char *info,
+static void pm_dev_err(struct device *dev, pm_message_t state, const char *info,
 			int error)
 {
 	printk(KERN_ERR "PM: Device %s failed to %s%s: error %d\n",
 		dev_name(dev), pm_verb(state.event), info, error);
 }
 
-static void dpm_show_time(ktime_t starttime, pm_message_t state, char *info)
+static void dpm_show_time(ktime_t starttime, pm_message_t state,
+			  const char *info)
 {
 	ktime_t calltime;
 	u64 usecs64;
@@ -435,7 +437,7 @@ static void dpm_show_time(ktime_t starttime, pm_message_t state, char *info)
 }
 
 static int dpm_run_callback(pm_callback_t cb, struct device *dev,
-			    pm_message_t state, char *info)
+			    pm_message_t state, const char *info)
 {
 	ktime_t calltime;
 	int error;
@@ -535,7 +537,7 @@ static void dpm_watchdog_clear(struct dpm_watchdog *wd)
 static int device_resume_noirq(struct device *dev, pm_message_t state, bool async)
 {
 	pm_callback_t callback = NULL;
-	char *info = NULL;
+	const char *info = NULL;
 	int error = 0;
 
 	TRACE_DEVICE(dev);
@@ -665,7 +667,7 @@ void dpm_resume_noirq(pm_message_t state)
 static int device_resume_early(struct device *dev, pm_message_t state, bool async)
 {
 	pm_callback_t callback = NULL;
-	char *info = NULL;
+	const char *info = NULL;
 	int error = 0;
 
 	TRACE_DEVICE(dev);
@@ -793,7 +795,7 @@ EXPORT_SYMBOL_GPL(dpm_resume_start);
 static int device_resume(struct device *dev, pm_message_t state, bool async)
 {
 	pm_callback_t callback = NULL;
-	char *info = NULL;
+	const char *info = NULL;
 	int error = 0;
 	DECLARE_DPM_WATCHDOG_ON_STACK(wd);
 
@@ -955,7 +957,7 @@ void dpm_resume(pm_message_t state)
 static void device_complete(struct device *dev, pm_message_t state)
 {
 	void (*callback)(struct device *) = NULL;
-	char *info = NULL;
+	const char *info = NULL;
 
 	if (dev->power.syscore)
 		return;
@@ -1080,7 +1082,7 @@ static pm_message_t resume_event(pm_message_t sleep_state)
 static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool async)
 {
 	pm_callback_t callback = NULL;
-	char *info = NULL;
+	const char *info = NULL;
 	int error = 0;
 
 	TRACE_DEVICE(dev);
@@ -1225,7 +1227,7 @@ int dpm_suspend_noirq(pm_message_t state)
 static int __device_suspend_late(struct device *dev, pm_message_t state, bool async)
 {
 	pm_callback_t callback = NULL;
-	char *info = NULL;
+	const char *info = NULL;
 	int error = 0;
 
 	TRACE_DEVICE(dev);
@@ -1384,7 +1386,7 @@ EXPORT_SYMBOL_GPL(dpm_suspend_end);
  */
 static int legacy_suspend(struct device *dev, pm_message_t state,
 			  int (*cb)(struct device *dev, pm_message_t state),
-			  char *info)
+			  const char *info)
 {
 	int error;
 	ktime_t calltime;
@@ -1426,7 +1428,7 @@ static void dpm_clear_suppliers_direct_complete(struct device *dev)
 static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 {
 	pm_callback_t callback = NULL;
-	char *info = NULL;
+	const char *info = NULL;
 	int error = 0;
 	DECLARE_DPM_WATCHDOG_ON_STACK(wd);
 

drivers/base/power/opp/core.c

@@ -180,7 +180,7 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
 {
 	struct opp_table *opp_table;
 	struct dev_pm_opp *opp;
-	struct regulator *reg, **regulators;
+	struct regulator *reg;
 	unsigned long latency_ns = 0;
 	int ret, i, count;
 	struct {
@@ -198,15 +198,9 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
 	if (!count)
 		goto put_opp_table;
 
-	regulators = kmalloc_array(count, sizeof(*regulators), GFP_KERNEL);
-	if (!regulators)
-		goto put_opp_table;
-
 	uV = kmalloc_array(count, sizeof(*uV), GFP_KERNEL);
 	if (!uV)
-		goto free_regulators;
-
-	memcpy(regulators, opp_table->regulators, count * sizeof(*regulators));
+		goto put_opp_table;
 
 	mutex_lock(&opp_table->lock);
 
@@ -232,15 +226,13 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
 	 * isn't freed, while we are executing this routine.
 	 */
 	for (i = 0; i < count; i++) {
-		reg = regulators[i];
+		reg = opp_table->regulators[i];
 		ret = regulator_set_voltage_time(reg, uV[i].min, uV[i].max);
 		if (ret > 0)
 			latency_ns += ret * 1000;
 	}
 
 	kfree(uV);
-free_regulators:
-	kfree(regulators);
 put_opp_table:
 	dev_pm_opp_put_opp_table(opp_table);
 
@@ -543,17 +535,18 @@ _generic_set_opp_clk_only(struct device *dev, struct clk *clk,
 	return ret;
 }
 
-static int _generic_set_opp(struct dev_pm_set_opp_data *data)
+static int _generic_set_opp_regulator(const struct opp_table *opp_table,
+				      struct device *dev,
+				      unsigned long old_freq,
+				      unsigned long freq,
+				      struct dev_pm_opp_supply *old_supply,
+				      struct dev_pm_opp_supply *new_supply)
 {
-	struct dev_pm_opp_supply *old_supply = data->old_opp.supplies;
-	struct dev_pm_opp_supply *new_supply = data->new_opp.supplies;
-	unsigned long old_freq = data->old_opp.rate, freq = data->new_opp.rate;
-	struct regulator *reg = data->regulators[0];
-	struct device *dev= data->dev;
+	struct regulator *reg = opp_table->regulators[0];
 	int ret;
 
 	/* This function only supports single regulator per device */
-	if (WARN_ON(data->regulator_count > 1)) {
+	if (WARN_ON(opp_table->regulator_count > 1)) {
 		dev_err(dev, "multiple regulators are not supported\n");
 		return -EINVAL;
 	}
@@ -566,7 +559,7 @@ static int _generic_set_opp(struct dev_pm_set_opp_data *data)
 	}
 
 	/* Change frequency */
-	ret = _generic_set_opp_clk_only(dev, data->clk, old_freq, freq);
+	ret = _generic_set_opp_clk_only(dev, opp_table->clk, old_freq, freq);
 	if (ret)
 		goto restore_voltage;
 
@@ -580,12 +573,12 @@ static int _generic_set_opp(struct dev_pm_set_opp_data *data)
 	return 0;
 
 restore_freq:
-	if (_generic_set_opp_clk_only(dev, data->clk, freq, old_freq))
+	if (_generic_set_opp_clk_only(dev, opp_table->clk, freq, old_freq))
 		dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n",
 			__func__, old_freq);
 restore_voltage:
 	/* This shouldn't harm even if the voltages weren't updated earlier */
-	if (old_supply->u_volt)
+	if (old_supply)
 		_set_opp_voltage(dev, reg, old_supply);
 
 	return ret;
@@ -603,10 +596,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 {
 	struct opp_table *opp_table;
 	unsigned long freq, old_freq;
-	int (*set_opp)(struct dev_pm_set_opp_data *data);
 	struct dev_pm_opp *old_opp, *opp;
-	struct regulator **regulators;
-	struct dev_pm_set_opp_data *data;
 	struct clk *clk;
 	int ret, size;
 
@@ -661,38 +651,35 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 	dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n", __func__,
 		old_freq, freq);
 
-	regulators = opp_table->regulators;
-
 	/* Only frequency scaling */
-	if (!regulators) {
+	if (!opp_table->regulators) {
 		ret = _generic_set_opp_clk_only(dev, clk, old_freq, freq);
-		goto put_opps;
-	}
+	} else if (!opp_table->set_opp) {
+		ret = _generic_set_opp_regulator(opp_table, dev, old_freq, freq,
+						 IS_ERR(old_opp) ? NULL : old_opp->supplies,
+						 opp->supplies);
+	} else {
+		struct dev_pm_set_opp_data *data;
 
-	if (opp_table->set_opp)
-		set_opp = opp_table->set_opp;
-	else
-		set_opp = _generic_set_opp;
-
-	data = opp_table->set_opp_data;
-	data->regulators = regulators;
-	data->regulator_count = opp_table->regulator_count;
-	data->clk = clk;
-	data->dev = dev;
-
-	data->old_opp.rate = old_freq;
-	size = sizeof(*opp->supplies) * opp_table->regulator_count;
-	if (IS_ERR(old_opp))
-		memset(data->old_opp.supplies, 0, size);
-	else
-		memcpy(data->old_opp.supplies, old_opp->supplies, size);
+		data = opp_table->set_opp_data;
+		data->regulators = opp_table->regulators;
+		data->regulator_count = opp_table->regulator_count;
+		data->clk = clk;
+		data->dev = dev;
 
-	data->new_opp.rate = freq;
-	memcpy(data->new_opp.supplies, opp->supplies, size);
+		data->old_opp.rate = old_freq;
+		size = sizeof(*opp->supplies) * opp_table->regulator_count;
+		if (IS_ERR(old_opp))
+			memset(data->old_opp.supplies, 0, size);
+		else
+			memcpy(data->old_opp.supplies, old_opp->supplies, size);
 
-	ret = set_opp(data);
+		data->new_opp.rate = freq;
+		memcpy(data->new_opp.supplies, opp->supplies, size);
+
+		ret = opp_table->set_opp(data);
+	}
 
-put_opps:
 	dev_pm_opp_put(opp);
 put_old_opp:
 	if (!IS_ERR(old_opp))
@@ -1375,6 +1362,73 @@ void dev_pm_opp_put_regulators(struct opp_table *opp_table)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulators);
 
+/**
+ * dev_pm_opp_set_clkname() - Set clk name for the device
+ * @dev: Device for which clk name is being set.
+ * @name: Clk name.
+ *
+ * In order to support OPP switching, OPP layer needs to get pointer to the
+ * clock for the device. Simple cases work fine without using this routine (i.e.
+ * by passing connection-id as NULL), but for a device with multiple clocks
+ * available, the OPP core needs to know the exact name of the clk to use.
+ *
+ * This must be called before any OPPs are initialized for the device.
+ */
+struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char *name)
+{
+	struct opp_table *opp_table;
+	int ret;
+
+	opp_table = dev_pm_opp_get_opp_table(dev);
+	if (!opp_table)
+		return ERR_PTR(-ENOMEM);
+
+	/* This should be called before OPPs are initialized */
+	if (WARN_ON(!list_empty(&opp_table->opp_list))) {
+		ret = -EBUSY;
+		goto err;
+	}
+
+	/* Already have default clk set, free it */
+	if (!IS_ERR(opp_table->clk))
+		clk_put(opp_table->clk);
+
+	/* Find clk for the device */
+	opp_table->clk = clk_get(dev, name);
+	if (IS_ERR(opp_table->clk)) {
+		ret = PTR_ERR(opp_table->clk);
+		if (ret != -EPROBE_DEFER) {
+			dev_err(dev, "%s: Couldn't find clock: %d\n", __func__,
+				ret);
+		}
+		goto err;
+	}
+
+	return opp_table;
+
+err:
+	dev_pm_opp_put_opp_table(opp_table);
+
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_clkname);
+
+/**
+ * dev_pm_opp_put_clkname() - Releases resources blocked for clk.
+ * @opp_table: OPP table returned from dev_pm_opp_set_clkname().
+ */
+void dev_pm_opp_put_clkname(struct opp_table *opp_table)
+{
+	/* Make sure there are no concurrent readers while updating opp_table */
+	WARN_ON(!list_empty(&opp_table->opp_list));
+
+	clk_put(opp_table->clk);
+	opp_table->clk = ERR_PTR(-EINVAL);
+
+	dev_pm_opp_put_opp_table(opp_table);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_put_clkname);
+
 /**
  * dev_pm_opp_register_set_opp_helper() - Register custom set OPP helper
  * @dev: Device for which the helper is getting registered.

drivers/base/power/opp/debugfs.c

@@ -40,11 +40,10 @@ static bool opp_debug_create_supplies(struct dev_pm_opp *opp,
 				      struct dentry *pdentry)
 {
 	struct dentry *d;
-	int i = 0;
+	int i;
 	char *name;
 
-	/* Always create at least supply-0 directory */
-	do {
+	for (i = 0; i < opp_table->regulator_count; i++) {
 		name = kasprintf(GFP_KERNEL, "supply-%d", i);
 
 		/* Create per-opp directory */
@@ -70,7 +69,7 @@ static bool opp_debug_create_supplies(struct dev_pm_opp *opp,
 		if (!debugfs_create_ulong("u_amp", S_IRUGO, d,
 					  &opp->supplies[i].u_amp))
 			return false;
-	} while (++i < opp_table->regulator_count);
+	}
 
 	return true;
 }

drivers/base/power/opp/of.c

@@ -131,8 +131,14 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 		prop = of_find_property(opp->np, name, NULL);
 
 		/* Missing property isn't a problem, but an invalid entry is */
-		if (!prop)
-			return 0;
+		if (!prop) {
+			if (!opp_table->regulator_count)
+				return 0;
+
+			dev_err(dev, "%s: opp-microvolt missing although OPP managing regulators\n",
+				__func__);
+			return -EINVAL;
+		}
 	}
 
 	vcount = of_property_count_u32_elems(opp->np, name);

drivers/base/power/sysfs.c

@@ -607,7 +607,7 @@ static struct attribute *power_attrs[] = {
 #endif /* CONFIG_PM_ADVANCED_DEBUG */
 	NULL,
 };
-static struct attribute_group pm_attr_group = {
+static const struct attribute_group pm_attr_group = {
 	.name	= power_group_name,
 	.attrs	= power_attrs,
 };
@@ -629,7 +629,7 @@ static struct attribute *wakeup_attrs[] = {
 #endif
 	NULL,
 };
-static struct attribute_group pm_wakeup_attr_group = {
+static const struct attribute_group pm_wakeup_attr_group = {
 	.name	= power_group_name,
 	.attrs	= wakeup_attrs,
 };
@@ -644,7 +644,7 @@ static struct attribute *runtime_attrs[] = {
 	&dev_attr_autosuspend_delay_ms.attr,
 	NULL,
 };
-static struct attribute_group pm_runtime_attr_group = {
+static const struct attribute_group pm_runtime_attr_group = {
 	.name	= power_group_name,
 	.attrs	= runtime_attrs,
 };
@@ -653,7 +653,7 @@ static struct attribute *pm_qos_resume_latency_attrs[] = {
 	&dev_attr_pm_qos_resume_latency_us.attr,
 	NULL,
 };
-static struct attribute_group pm_qos_resume_latency_attr_group = {
+static const struct attribute_group pm_qos_resume_latency_attr_group = {
 	.name	= power_group_name,
 	.attrs	= pm_qos_resume_latency_attrs,
 };
@@ -662,7 +662,7 @@ static struct attribute *pm_qos_latency_tolerance_attrs[] = {
 	&dev_attr_pm_qos_latency_tolerance_us.attr,
 	NULL,
 };
-static struct attribute_group pm_qos_latency_tolerance_attr_group = {
+static const struct attribute_group pm_qos_latency_tolerance_attr_group = {
 	.name	= power_group_name,
 	.attrs	= pm_qos_latency_tolerance_attrs,
 };
@@ -672,7 +672,7 @@ static struct attribute *pm_qos_flags_attrs[] = {
 	&dev_attr_pm_qos_remote_wakeup.attr,
 	NULL,
 };
-static struct attribute_group pm_qos_flags_attr_group = {
+static const struct attribute_group pm_qos_flags_attr_group = {
 	.name	= power_group_name,
 	.attrs	= pm_qos_flags_attrs,
 };

drivers/base/power/wakeup.c

@@ -60,6 +60,8 @@ static LIST_HEAD(wakeup_sources);
 
 static DECLARE_WAIT_QUEUE_HEAD(wakeup_count_wait_queue);
 
+DEFINE_STATIC_SRCU(wakeup_srcu);
+
 static struct wakeup_source deleted_ws = {
 	.name = "deleted",
 	.lock =  __SPIN_LOCK_UNLOCKED(deleted_ws.lock),
@@ -198,7 +200,7 @@ void wakeup_source_remove(struct wakeup_source *ws)
 	spin_lock_irqsave(&events_lock, flags);
 	list_del_rcu(&ws->entry);
 	spin_unlock_irqrestore(&events_lock, flags);
-	synchronize_rcu();
+	synchronize_srcu(&wakeup_srcu);
 }
 EXPORT_SYMBOL_GPL(wakeup_source_remove);
 
@@ -332,12 +334,12 @@ void device_wakeup_detach_irq(struct device *dev)
 void device_wakeup_arm_wake_irqs(void)
 {
 	struct wakeup_source *ws;
+	int srcuidx;
 
-	rcu_read_lock();
+	srcuidx = srcu_read_lock(&wakeup_srcu);
 	list_for_each_entry_rcu(ws, &wakeup_sources, entry)
 		dev_pm_arm_wake_irq(ws->wakeirq);
-
-	rcu_read_unlock();
+	srcu_read_unlock(&wakeup_srcu, srcuidx);
 }
 
 /**
@@ -348,12 +350,12 @@ void device_wakeup_arm_wake_irqs(void)
 void device_wakeup_disarm_wake_irqs(void)
 {
 	struct wakeup_source *ws;
+	int srcuidx;
 
-	rcu_read_lock();
+	srcuidx = srcu_read_lock(&wakeup_srcu);
 	list_for_each_entry_rcu(ws, &wakeup_sources, entry)
 		dev_pm_disarm_wake_irq(ws->wakeirq);
-
-	rcu_read_unlock();
+	srcu_read_unlock(&wakeup_srcu, srcuidx);
 }
 
 /**
@@ -804,10 +806,10 @@ EXPORT_SYMBOL_GPL(pm_wakeup_dev_event);
 void pm_print_active_wakeup_sources(void)
 {
 	struct wakeup_source *ws;
-	int active = 0;
+	int srcuidx, active = 0;
 	struct wakeup_source *last_activity_ws = NULL;
 
-	rcu_read_lock();
+	srcuidx = srcu_read_lock(&wakeup_srcu);
 	list_for_each_entry_rcu(ws, &wakeup_sources, entry) {
 		if (ws->active) {
 			pr_debug("active wakeup source: %s\n", ws->name);
@@ -823,7 +825,7 @@ void pm_print_active_wakeup_sources(void)
 	if (!active && last_activity_ws)
 		pr_debug("last active wakeup source: %s\n",
 			last_activity_ws->name);
-	rcu_read_unlock();
+	srcu_read_unlock(&wakeup_srcu, srcuidx);
 }
 EXPORT_SYMBOL_GPL(pm_print_active_wakeup_sources);
 
@@ -950,8 +952,9 @@ void pm_wakep_autosleep_enabled(bool set)
 {
 	struct wakeup_source *ws;
 	ktime_t now = ktime_get();
+	int srcuidx;
 
-	rcu_read_lock();
+	srcuidx = srcu_read_lock(&wakeup_srcu);
 	list_for_each_entry_rcu(ws, &wakeup_sources, entry) {
 		spin_lock_irq(&ws->lock);
 		if (ws->autosleep_enabled != set) {
@@ -965,7 +968,7 @@ void pm_wakep_autosleep_enabled(bool set)
 		}
 		spin_unlock_irq(&ws->lock);
 	}
-	rcu_read_unlock();
+	srcu_read_unlock(&wakeup_srcu, srcuidx);
 }
 #endif /* CONFIG_PM_AUTOSLEEP */
 
@@ -1026,15 +1029,16 @@ static int print_wakeup_source_stats(struct seq_file *m,
 static int wakeup_sources_stats_show(struct seq_file *m, void *unused)
 {
 	struct wakeup_source *ws;
+	int srcuidx;
 
 	seq_puts(m, "name\t\tactive_count\tevent_count\twakeup_count\t"
 		"expire_count\tactive_since\ttotal_time\tmax_time\t"
 		"last_change\tprevent_suspend_time\n");
 
-	rcu_read_lock();
+	srcuidx = srcu_read_lock(&wakeup_srcu);
 	list_for_each_entry_rcu(ws, &wakeup_sources, entry)
 		print_wakeup_source_stats(m, ws);
-	rcu_read_unlock();
+	srcu_read_unlock(&wakeup_srcu, srcuidx);
 
 	print_wakeup_source_stats(m, &deleted_ws);
 

include/linux/pm_opp.h

@@ -121,6 +121,8 @@ struct opp_table *dev_pm_opp_set_prop_name(struct device *dev, const char *name)
 void dev_pm_opp_put_prop_name(struct opp_table *opp_table);
 struct opp_table *dev_pm_opp_set_regulators(struct device *dev, const char * const names[], unsigned int count);
 void dev_pm_opp_put_regulators(struct opp_table *opp_table);
+struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char * name);
+void dev_pm_opp_put_clkname(struct opp_table *opp_table);
 struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data));
 void dev_pm_opp_register_put_opp_helper(struct opp_table *opp_table);
 int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq);
@@ -257,6 +259,13 @@ static inline struct opp_table *dev_pm_opp_set_regulators(struct device *dev, co
 
 static inline void dev_pm_opp_put_regulators(struct opp_table *opp_table) {}
 
+static inline struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char * name)
+{
+	return ERR_PTR(-ENOTSUPP);
+}
+
+static inline void dev_pm_opp_put_clkname(struct opp_table *opp_table) {}
+
 static inline int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 {
 	return -ENOTSUPP;